Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2011.12 (Apr 08 2012 - 19:03:41)
- Cloud Engines-Pogoplug v4/Mobile:MMC version
- SoC: Kirkwood 88F6281_A1
- DRAM: 128 MiB
- WARNING: Caches not enabled
- NAND: 128 MiB
- In: serial
- Out: serial
- Err: serial
- Net: egiga0
- Hit any key to stop autoboot: 0
- (Re)start USB...
- USB: Register 10011 NbrPorts 1
- USB EHCI 1.00
- scanning bus for devices... 2 USB Device(s) found
- scanning bus for storage devices... 1 Storage Device(s) found
- Loading file "/rescueme" from usb device 0:1 (usbda1)
- Failed to mount ext2 filesystem...
- ** Bad ext2 partition or disk - usb 0:1 **
- reading /rescueme.txt
- ** Unable to read "/rescueme.txt" from usb 0:1 **
- Creating 1 MTD partitions on "nand0":
- 0x000002500000-0x000008000000 : "mtd=3"
- UBI: attaching mtd1 to ubi0
- UBI: physical eraseblock size: 131072 bytes (128 KiB)
- UBI: logical eraseblock size: 129024 bytes
- UBI: smallest flash I/O unit: 2048
- UBI: sub-page size: 512
- UBI: VID header offset: 512 (aligned 512)
- UBI: data offset: 2048
- UBI error: validate_ec_hdr: bad VID header offset 2048, expected 512
- UBI error: validate_ec_hdr: bad EC header
- UBI error: ubi_io_read_ec_hdr: validation failed for PEB 0
- UBI error: ubi_init: cannot attach mtd1
- UBI error: ubi_init: UBI error: cannot initialize UBI, error -22
- UBI init error 22
- Loading file "/boot/uImage" from usb device 0:1 (usbda1)
- Failed to mount ext2 filesystem...
- ** Bad ext2 partition or disk - usb 0:1 **
- ** Block device usb 1 not supported
- ** Block device usb 2 not supported
- ** Block device usb 3 not supported
- Loading file "/boot/uImage" from usb device 0:1 (usbda1)
- Failed to mount ext2 filesystem...
- ** Bad ext2 partition or disk - usb 0:1 **
- Loading file "/boot/uInitrd" from usb device 0:1 (usbda1)
- Failed to mount ext2 filesystem...
- ** Bad ext2 partition or disk - usb 0:1 **
- Wrong Image Format for bootm command
- ERROR: can't get kernel image!
- stopping USB..
- ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000
- Scanning JFFS2 FS: done.
- find_inode failed for name=uboot-original-mtd0.kwb
- load: Failed to find inode
- ### JFFS2 LOAD ERROR<0> for uboot-original-mtd0.kwb!
- ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000
- Scanning JFFS2 FS:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement