Guest User

SMART sde

a guest
Jun 18th, 2020
63
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.90 KB | None | 0 0
  1. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-59-generic] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: ST3000VX010-2H916L
  6. Serial Number: ZGY3M3EV
  7. LU WWN Device Id: 5 000c50 0b400ae96
  8. Firmware Version: CV11
  9. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  10. Sector Sizes: 512 bytes logical, 4096 bytes physical
  11. Rotation Rate: 5980 rpm
  12. Form Factor: 3.5 inches
  13. Device is: Not in smartctl database [for details use: -P showall]
  14. ATA Version is: ACS-3 T13/2161-D revision 5
  15. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is: Thu Jun 18 11:58:27 2020 SAST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 591) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 499) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 2) minutes.
  52. SCT capabilities: (0x50bd) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 10
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000f 082 064 044 Pre-fail Always - 171019258
  61. 3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0
  62. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 105
  63. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x000f 090 060 045 Pre-fail Always - 10467052575
  65. 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 11070 (114 105 0)
  66. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 104
  68. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  69. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  70. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  71. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  72. 190 Airflow_Temperature_Cel 0x0022 073 055 040 Old_age Always - 27 (Min/Max 16/30)
  73. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  74. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 71
  75. 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 4022
  76. 194 Temperature_Celsius 0x0022 027 045 000 Old_age Always - 27 (0 7 0 0 0)
  77. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  78. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  79. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  80. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 9159 (162 81 0)
  81. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 41911350711
  82. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 70178079008
  83.  
  84. SMART Error Log Version: 1
  85. No Errors Logged
  86.  
  87. SMART Self-test log structure revision number 1
  88. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  89. # 1 Short offline Completed without error 00% 6831 -
  90.  
  91. SMART Selective self-test log data structure revision number 1
  92. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  93. 1 0 0 Not_testing
  94. 2 0 0 Not_testing
  95. 3 0 0 Not_testing
  96. 4 0 0 Not_testing
  97. 5 0 0 Not_testing
  98. Selective self-test flags (0x0):
  99. After scanning selected spans, do NOT read-scan remainder of disk.
  100. If Selective self-test is pending on power-up, resume after 0 minute delay.
Add Comment
Please, Sign In to add comment