API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 4th, 2017
518
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.82 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.12.12 12:26:49 =~=~=~=~=~=~=~=~=~=~=~=
  2. reboot
  3. /bin/sh: ?: not found
  4. ~ # reboot
  5. ~ #
  6. The system is going down NOW!
  7.  
  8. Sent SIGTERM to all processes
  9.  
  10. Sent SIGKILL to all processes
  11.  
  12. Requesting system reboot
  13. Restarting system.ั
  14.  
  15.  
  16. U-Boot 1.1.3 (Nov 12 2009 - 00:08:59)
  17.  
  18.  
  19. Board: Ralink APSoC DRAM: 16 MB
  20.  
  21. relocate_code Pointer at: 80fb4000
  22.  
  23. spi_wait_nsec: 3e
  24.  
  25. spi deice id: c2 20 16 c2 20 (2016c220)
  26.  
  27. find flash: mx25l3205d
  28.  
  29. raspi_read: from:30000 len:1000
  30.  
  31. raspi_read: from:30000 len:1000
  32.  
  33. ============================================
  34.  
  35. Ralink UBoot Version: 3.3
  36.  
  37. --------------------------------------------
  38.  
  39. ASIC 3052_MP2 (Port5<->None)
  40.  
  41. DRAM component: 128 Mbits SDR
  42.  
  43. DRAM bus: 16 bit
  44.  
  45. Total memory: 16 MBytes
  46.  
  47. Flash component: SPI Flash
  48.  
  49. Date:Nov 12 2009 Time:00:08:59
  50.  
  51. ============================================
  52.  
  53. icache: sets:256, ways:4, linesz:32 ,total:32768
  54.  
  55. dcache: sets:128, ways:4, linesz:32 ,total:16384
  56.  
  57.  
  58. ##### The CPU freq = 320 MHZ ####
  59.  
  60.  
  61. SDRAM bus set to 16 bit
  62.  
  63. SDRAM size =16 Mbytes
  64.  
  65. GPIO 10 not detect
  66.  
  67.  
  68. Please choose the operation:
  69.  
  70. 1: Load system code to SDRAM via TFTP.
  71.  
  72. 2: Load system code then write to Flash via TFTP.
  73.  
  74. 3: Boot system code via Flash (default).
  75.  
  76. 4: Entr boot command line interface.
  77.  
  78. 9: Load Boot Loader code then write to Flash via TFTP.
  79.  
  80.  
  81.  
  82. You choosed 3
  83.  
  84.  
  85.  0
  86.  
  87.  
  88.  
  89. 3: System Boot system code via Flash.
  90.  
  91. ## Booting image at bf050000 ...
  92.  
  93. raspi_read: from:50000 len:40
  94.  
  95. Image Name: RT-NL
  96.  
  97. Created: 2010-11-24 15:37:40 UTC
  98.  
  99. Image Type: MIPS Linux Kernel Image (lzma compressed)
  100.  
  101. Data Size: 3649472 Bytes = 3.5 MB
  102.  
  103. Load Address: 80000000
  104.  
  105. Entry Point: 80202000
  106.  
  107. raspi_read: from:50040 len:37afc0
  108.  
  109. Verifying Checksum ... OK
  110.  
  111. Uncompressing Kernel Image ... OK
  112.  
  113. No initrd
  114.  
  115. ## Transferring control to Linux (at address 80202000) ...
  116.  
  117. ## Giving linux memsize in MB, 16
  118.  
  119.  
  120. Starting kernel ...
  121.  
  122.  
  123.  
  124. LINUX started...
  125.  
  126. THIS IS ASIC
  127. Linux version 2.6.21.7 (root@sfstudio.sadnet.lo) (gcc version 4.2.4) #0 Wed Nov 24 21:31:58 OMST 2010
  128.  
  129. The CPU feqenuce set to 320 MHz
  130. CPU revision is: 0001964c
  131. DetectRAMsequence
  132. MAX memory:[64]
  133. RAM after first pass:[67108864]
  134. RAM after second pass:[16777216]
  135. FullviewRAM:[16777216]
  136. Determined physical RAM map:
  137. memory: 01000000 @ 00000000 (usable)
  138. Built 1 zonelists. Total pages: 4064
  139. Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4
  140. start_kernel(): bug: interrupts were enabled *very* early, fixing it
  141. Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
  142. Primary data cache 16kB, 4-way, linesize 32 bytes.
  143. Synthesized TLB refill handler (20 instructions).
  144. Synthesized TLB load handler fastpath (32 instructions).
  145. Synthesized TLB store handler fastpath (32 instructions).
  146. Synthesized TLB modify handler fastpath (31 instructions).
  147. Cache parity protection disabled
  148. cause = 50808000, status = 11000000
  149. PID hash table entries: 64 (order: 6, 256 bytes)
  150. calculating r4koff... 0004e200(320000)
  151. CPU frequency 320.00 MHz
  152. Using 160.000 MHz high precision timer.
  153. Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
  154. Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
  155. Memory: 13940k/16384k available (1781k kernel code, 2444k reserved, 271k data, 96k init, 0k highmem)
  156. Mount-cache hash table entries: 512
  157. set cpu_wait to r4k_wait
  158. softirq RT prio: 24.
  159. NET: Registered protocol family 16
  160. Time: MIPS clocksource has been installed.
  161. NET: Registered protocol family 2
  162. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  163. TCP established hash table entries: 512 (order: 0, 4096 bytes)
  164. TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  165. TCP: Hash tables configured (established 512 bind 512)
  166. TCP reno registered
  167. deice id : c2 20 16 c2 20 (2016c220)
  168. MX25L3205D(c2 2016c220) (4096 Kbytes)
  169. mtd .name = raspi, .size = 0x00400000 (4M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
  170. Creating 6 MTD partitions on "raspi":
  171. 0x00000000-0x00030000 : "Bootloader"
  172. 0x00030000-0x00040000 : "Config"
  173. 0x00040000-0x00050000 : "Factory"
  174. 0x00050000-0x00100000 : "Kernel"
  175. 0x00100000-0x003e0000 : "RootFS"
  176. 0x003e0000-0x00400000 : "RW-FS"
  177. squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
  178. squashfs: LZMA suppport for slax.org by jro
  179. io scheduler noop registered (default)
  180. Ralink gpio driver initialized
  181. Number of GPIO=52
  182. Enable Ralink GDMA Controller Module
  183. Generic RTC Driver v1.07
  184. Ralink APSoC Hardware Watchdog Timer
  185. Serial: 8250/16550 driver $Revision: 1.6 $ 2 ports, IRQ sharing disabled
  186. serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
  187. serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
  188. block2mtd: version $Revision: 1.1.1.1 $
  189. nf_conntrack version 0.5.0 (16384 buckets, 8192 max)
  190. TCP cubic registered
  191. ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Fully Cone
  192. BCM fast NAT: INIT
  193. NET: Registered protocol family 1
  194. NET: Registered protocol family 17
  195. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  196. All bugs added by David S. Miller <davem@redhat.com>
  197. Ralink APSoC Ethernet Driver Initilization. v2.00 256 rx/tx descriptors allocated, mtu = 1500!
  198. NAPI enable, weight = 32, Tx Ring = 256, Rx Ring = 256
  199. PROC INIT OK!
  200. VFS: Mounted root (squashfs filesystem) readonly.
  201. Freeing unused kernel memory: 96k freed
  202. mount /proc file system ok!
  203. mount /sys file system ok!
  204. mount /dev file system ok!
  205. mount /var file system ok!
  206. Algorithmics/MIPS FPU Emulator v1.5
  207. INIT: Prepare start init!
  208. INIT: Init DEV particion
  209. INIT: Init RW particion
  210. INIT: RW File system is ok - preparing ...
  211. ~ # PRECONFIG: Preconfigure...
  212. PRECONFIG: Delete old config
  213. PRECONFIG: Mount all filesystems
  214. PRECONFIG: Create some folders
  215. PRECONFIG: Restore time to build time or save time
  216. Thu Nov 25 21:34:00 GMT 2010
  217. PRECONFIG: Copy web pages to tmpfs
  218. CHECKCONF: >>>> NORMAL BOOT <<<<
  219. CHECKCONF: Backup nvram...
  220. Store settings to backup file....
  221. crc = 44980422
  222. sh: NO: unknown operand
  223. MODULES: Reinit power mode for all switch ports
  224. Set: phy[0].reg[0] = 0800
  225. Set: phy[1].reg[0] = 0800
  226. Set: phy[2].reg[0] = 0800
  227. Set: phy[3].reg[0] = 0800
  228. Set: phy[4].reg[0] = 0800
  229. Set: phy[0].reg[0] = 9000
  230. Set: phy[1].reg[0] = 9000
  231. Set: phy[2].reg[0] = 9000
  232. Set: phy[3].reg[0] = 9000
  233. Set: phy[4].reg[0] = 9000
  234. Reset all phy port
  235. Set: phy[0].reg[0] = 3900
  236. Set: phy[1].reg[0] = 3900
  237. Set: phy[2].reg[0] = 3900
  238. Set: phy[3].reg[0] = 3900
  239. Set: phy[0].reg[0] = 3100
  240. Set: phy[1].reg[0] = 3100
  241. Set: phy[2].reg[0] = 3100
  242. Set: phy[3].reg[0] = 3100
  243. ##### restore to dump switch #####
  244. switch reg write offset=14, value=5555
  245. switch reg write offset=40, value=1001
  246. switch reg write offset=44, value=1001
  247. switch reg write offset=48, value=1001
  248. switch reg write offset=4c, value=1
  249. switch reg write offset=50, value=2001
  250. switch reg write offset=70, value=ffffffff
  251. switch reg write offset=98, value=7f7f
  252. switch reg write offset=e4, value=7f
  253. switch reg write offset=e4, value=0
  254. ##### config vlan partition (WLLLL) #####
  255. reswitch reg write offset=14, value=405555
  256. switch reg write offset=50, value=2001
  257. switch reg write offset=98, value=7f3f
  258. switch reg write offset=e4, value=3f
  259. switch reg write offset=40, value=1001
  260. switch reg write offset=44, value=1001
  261. switch reg write offset=48, value=1002
  262. switch reg write offset=70, value=ffff506f
  263. SYSLOG: Start klogd
  264. SYSLOG: Start syslogd
  265. PASSWD: Set current password
  266. bPassword for 'Admin' changed
  267. GENKEY: DSS file exist
  268. GENKEY: Use exist UUID file
  269. RESOLVE: Generate resolve:
  270. LOOPBACK: Start loopback interface...
  271. oot
  272.  
  273. The system is going down NOW!
  274.  
  275. Sent SIGTERM to all processes
  276. Terminated
  277. ~ #
  278. Sent SIGKILL toStopped WatchDog Timer.
  279. Restarting system.ั
  280.  
  281.  
  282. U-Boot 1.1.3 (Nov 12 2009 - 00:08:59)
  283.  
  284.  
  285. Board: Ralink APSoC DRAM: 16 MB
  286.  
  287. relocate_code Pointer at: 80fb4000
  288.  
  289. spi_wait_nsec: 3e
  290.  
  291. spi deice id: c2 20 16 c2 20 (2016c220)
  292.  
  293. find flash: mx25l3205d
  294.  
  295. raspi_read: from:30000 len:1000
  296.  
  297. raspi_read: from:30000 len:1000
  298.  
  299. ============================================
  300.  
  301. Ralink UBoot Version: 3.3
  302.  
  303. --------------------------------------------
  304.  
  305. ASIC 3052_MP2 (Port5<->None)
  306.  
  307. DRAM component: 128 Mbits SDR
  308.  
  309. DRAM bus: 16 bit
  310.  
  311. Total memory: 16 MBytes
  312.  
  313. Flash component: SPI Flash
  314.  
  315. Date:Nov 12 2009 Time:00:08:59
  316.  
  317. ============================================
  318.  
  319. icache: sets:256, ways:4, linesz:32 ,total:32768
  320.  
  321. dcache: sets:128, ways:4, linesz:32 ,total:16384
  322.  
  323.  
  324. ##### The CPU freq = 320 MHZ ####
  325.  
  326.  
  327. SDRAM bus set to 16 bit
  328.  
  329. SDRAM size =16 Mbytes
  330.  
  331. GPIO 10 not detect
  332.  
  333.  
  334. Please choose the operation:
  335.  
  336. 1: Load system code to SDRAM via TFTP.
  337.  
  338. 2: Load system code then write to Flash via TFTP.
  339.  
  340. 3: Boot system code via Flash (default).
  341.  
  342. 4: Entr boot command line interface.
  343.  
  344. 9: Load Boot Loader code then write to Flash via TFTP.
  345.  
  346.  
  347.  
  348. You choosed 2
  349.  
  350.  
  351.  0
  352.  
  353.  
  354.  
  355.  
  356.  
  357. 2: System Load Linux Kernel then write to Flash via TFTP.
  358.  
  359. Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
  360.  
  361. Please Input new ones /or Ctrl-C to discard
  362.  
  363. Input device IP (10.10.10.123) ==:10.10.10.123            192.168.1.1
  364.  
  365. Input server IP (10.10.10.3) ==:10.10.10.3          192.168.1.2
  366.  
  367. Input Linux Kernel filename () ==:b.bin
  368.  
  369.  
  370. netboot_common, argc= 3
  371.  
  372.  
  373. NetTxPacket = 0x80FE4E40
  374.  
  375.  
  376. KSEG1ADDR(NetTxPacket) = 0xA0FE4E40
  377.  
  378.  
  379. NetLoop,call eth_halt !
  380.  
  381.  
  382. NetLoop,call eth_init !
  383.  
  384. Trying Eth0 (10/100-M)
  385.  
  386.  
  387. Waitting for RX_DMA_BUSY status Start... done
  388.  
  389.  
  390. Header Payload scatter function is Disable !!
  391.  
  392.  
  393. ETH_STATE_ACTIVE!!
  394.  
  395. Using Eth0 (10/100-M) device
  396.  
  397. TFTP from server 192.168.1.2; our IP address is 192.168.1.1
  398.  
  399. Filename 'b.bin'.
  400.  
  401.  
  402. TIMEOUT_COUNT=10,Load address: 0x80100000
  403.  
  404. Loading: *Got ARP REPLY, set server/gtwy eth addr (00:50:8d:b7:fb:f8)
  405.  
  406. Got it
  407.  
  408. Got ARP REQUEST, return our IP
  409.  
  410. checksum bad
  411.  
  412. checksum bad
  413.  
  414. checksum bad
  415.  
  416. checksum bad
  417.  
  418. dest != tftpOurPort
  419.  
  420. T #
  421.  
  422. first block received
  423.  
  424. ################################################################
  425.  
  426. #################################################################
  427.  
  428. #################################################################
  429.  
  430. ###########################################################checksum bad
  431.  
  432. ######
  433.  
  434. #################################################################
  435.  
  436. #################################################################
  437.  
  438. #################################################################
  439.  
  440. #################################################################
  441.  
  442. #################################################################
  443.  
  444. ######################################
  445.  
  446. done
  447.  
  448. Bytes transferred = 3186688 (30a000 hex)
  449.  
  450. NetBootFileXferSize= 0030a000
  451.  
  452. raspi_erase_write: offs:50000, count:30a000
  453.  
  454. raspi_erase: offs:50000 len:300000
  455.  
  456. raspi_write: to:50000 len:300000
  457.  
  458. raspi_read: from:350000 len:10000
  459.  
  460. raspi_erase: offs:350000 len:10000
  461.  
  462. raspi_write: to:350000 len:10000
  463.  
  464. Done!
  465.  
  466. ## Booting image at bf050000 ...
  467.  
  468. raspi_read: from:50000 len:40
  469.  
  470. Image Name: RT-NL
  471.  
  472. Created: 2010-12-12 10:09:39 UTC
  473.  
  474. Image Type: MIPS Linux Kernel Image (lzma compressed)
  475.  
  476. Data Size: 3186624 Bytes = 3 MB
  477.  
  478. Load Address: 80000000
  479.  
  480. Entry Point: 80204000
  481.  
  482. raspi_read: from:50040 len:309fc0
  483.  
  484. Verifying Checksum ... OK
  485.  
  486. Uncompressing Kernel Image ... OK
  487.  
  488. No initrd
  489.  
  490. ## Transferring control to Linux (at address 80204000) ...
  491.  
  492. ## Giving linux memsize in MB, 16
  493.  
  494.  
  495. Starting kernel ...
  496.  
  497.  
  498.  
  499. LINUX started...
  500.  
  501. THIS IS ASIC
  502. Linux version 2.6.21.7 (sfstudio_at_mail.ru@wive-ng.sf.net or sadnet.ru) (gcc version 4.2.4) #0 Sun Dec 12 16:03:28 OMST 2010
  503.  
  504. The CPU feqenuce set to 320 MHz
  505. CPU revision is: 0001964c
  506. Fixed Ramsize = 16 MBytes
  507. Determined physical RAM map:
  508. memory: 01000000 @ 00000000 (usable)
  509. Built 1 zonelists. Total pages: 4064
  510. Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 ro
  511. Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
  512. Primary data cache 16kB, 4-way, linesize 32 bytes.
  513. Synthesized TLB refill handler (20 instructions).
  514. Synthesized TLB load handler fastpath (32 instructions).
  515. Synthesized TLB store handler fastpath (32 instructions).
  516. Synthesized TLB modify handler fastpath (31 instructions).
  517. Cache parity protection disabled
  518. cause = 50808000, status = 11000000
  519. PID hash table entries: 64 (order: 6, 256 bytes)
  520. calculating r4koff... 0004e200(320000)
  521. CPU frequency 320.00 MHz
  522. Using 160.000 MHz high precision timer.
  523. Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
  524. Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
  525. Memory: 13988k/16384k available (1788k kernel code, 2396k reserved, 272k data, 96k init, 0k highmem)
  526. Mount-cache hash table entries: 512
  527. set cpu_wait to r4k_wait
  528. softirq RT prio: 24.
  529. NET: Registered protocol family 16
  530. Time: MIPS clocksource has been installed.
  531. NET: Registered protocol family 2
  532. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  533. TCP established hash table entries: 512 (order: 0, 4096 bytes)
  534. TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  535. TCP: Hash tables configured (established 512 bind 512)
  536. TCP reno registered
  537. ralink flash device: 0x400000 at 0x1f000000
  538. Error: 0 flash device was found
  539. deice id : c2 20 16 c2 20 (2016c220)
  540. MX25L3205D(c2 2016c220) (4096 Kbytes)
  541. mtd .name = raspi, .size = 0x00400000 (4M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
  542. Creating 6 MTD partitions on "raspi":
  543. 0x00000000-0x00030000 : "Bootloader"
  544. 0x00030000-0x00040000 : "Config"
  545. 0x00040000-0x00050000 : "Factory"
  546. 0x00050000-0x00110000 : "Kernel"
  547. 0x00110000-0x003e0000 : "RootFS"
  548. 0x003e0000-0x00400000 : "RW-FS"
  549. squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
  550. squashfs: LZMA suppport for slax.org by jro
  551. io scheduler noop registered (default)
  552. Ralink gpio driver initialized
  553. Number of GPIO=52
  554. Generic RTC Driver v1.07
  555. Ralink APSoC Hardware Watchdog Timer
  556. Serial: 8250/16550 driver $Revision: 1.6 $ 2 ports, IRQ sharing disabled
  557. serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
  558. serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
  559. Ralink APSoC Ethernet Driver Initilization. v2.0 256 rx/tx descriptors allocated, mtu = 1500!
  560. NAPI enable, weight = 32, Tx Ring = 256, Rx Ring = 256
  561. PROC INIT OK!
  562. block2mtd: version $Revision: 1.1.1.1 $
  563. nf_conntrack version 0.5.0 (16384 buckets, 8192 max)
  564. TCP cubic registered
  565. ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Fully Cone
  566. BCM fast NAT: INIT
  567. NET: Registered protocol family 1
  568. NET: Registered protocol family 17
  569. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  570. All bugs added by David S. Miller <davem@redhat.com>
  571. VFS: Mounted root (squashfs filesystem) readonly.
  572. Freeing unused kernel memory: 96k freed
  573. mount /proc file system ok!
  574. mount /sys file system ok!
  575. mount /dev file system ok!
  576. mount /var file system ok!
  577. Algorithmics/MIPS FPU Emulator v1.5
  578. INIT: Prepare start init!
  579. INIT: Init DEV particion
  580. INIT: Init RW particion
  581. INIT: RW File system is ok - preparing ...
  582. ~ # PRECONFIG: Preconfigure...
  583. PRECONFIG: Delete old config
  584. PRECONFIG: Mount all filesystems
  585. PRECONFIG: Create some folders
  586. PRECONFIG: Restore time to build time or save time
  587. Thu Nov 25 21:34:00 GMT 2010
  588. PRECONFIG: Copy web pages to tmpfs
  589. CHECKCONF: >>>> NORMAL BOOT <<<<
  590. CHECKCONF: Backup nvram...
  591. Store settings to backup file....
  592. crc = 44980422
  593. sh: NO: unknown operand
  594. MODULES: Reinit power mode for all switch ports
  595. Set: phy[0].reg[0] = 0800
  596. Set: phy[1].reg[0] = 0800
  597. Set: phy[2].reg[0] = 0800
  598. Set: phy[3].reg[0] = 0800
  599. Set: phy[4].reg[0] = 0800
  600. Set: phy[0].reg[0] = 9000
  601. Set: phy[1].reg[0] = 9000
  602. Set: phy[2].reg[0] = 9000
  603. Set: phy[3].reg[0] = 9000
  604. Set: phy[4].reg[0] = 9000
  605. Reset all phy port
  606. Set: phy[0].reg[0] = 3900
  607. Set: phy[1].reg[0] = 3900
  608. fSet: phy[2].reg[0] = 3900
  609. sSet: phy[3].reg[0] = 3900
  610. fuulSet: phy[0].reg[0] = 3100
  611. Set: phy[1].reg[0] = 3100
  612. Set: phy[2].reg[0] = 3100
  613. Set: phy[3].reg[0] = 3100
  614. ##### restore to dump switch #####
  615. switch reg write offset=14, value=5555
  616. switch reg write offset=40, value=1001
  617. switch reg write offset=44, value=1001
  618. switch reg write offset=48, value=1001
  619. switch reg write offset=4c, value=1
  620. switch reg write offset=50, value=2001
  621. switch reg write offset=70, value=ffffffff
  622. switch reg write offset=98, value=7f7f
  623. switch reg write offset=e4, value=7f
  624. switch reg write offset=e4, value=0
  625. ##### config vlan partition (WLLLL) #####
  626. switch reg write offset=14, value=405555
  627. switch reg write offset=50, value=2001
  628. switch reg write offset=98, value=7f3f
  629. switch reg write offset=e4, value=3f
  630. switch reg write offset=40, value=1001
  631. switch reg write offset=44, value=1001
  632. switch reg write offset=48, value=1002
  633. switch reg write offset=70, value=ffff506f
  634. SYSLOG: Start klogd
  635. SYSLOG: Start syslogd
  636. PASSWD: Set current password
  637. Password for 'Admin' changed
  638. GENKEY: DSS file exist
  639. GENKEY: Use exist UUID file
  640. RESOLVE: Generate resolve:
  641. LOOPBACK: Start loopback interface...
  642. LAN: Start network interfaces...
  643. LAN: -==Add bridge in the system==-
  644. LAN: -==BR0_MACADDR 00:0C:43:30:52:67==-
  645. LAN: -==Up bridge interface==-
  646. LAN: -==ETH2_MACADDR 00:0C:43:30:52:67==-
  647. GDMA1_MAC_ADRH -- : 0x0000000c
  648. GDMA1_MAC_ADRL -- : 0x43305267
  649. LAN: -==Up vlan root interface==-
  650.  
  651. phy_tx_ring = 0x00422000, tx_ring = 0xa0422000
  652.  
  653. phy_rx_ring = 0x00423000, rx_ring = 0xa0423000
  654. RT305x_ESW: Link Status Changed
  655. CDMA_CSG_CFG = 81000007
  656. GDMA1_FWD_CFG = 710000
  657. LAN: -==Add vlans and config==-
  658. LAN: -==ETH2.1_MACADDR 00:0C:43:30:52:67==-
  659. eth2.1: Setting MAC address to 00 0c 43 30 52 67.
  660. VLAN (eth2.1): Underlying device (eth2) has same MAC, not checking promiscious mode.
  661. LAN: -==ETH2.2_MACADDR 00:0C:43:30:52:66==-
  662. eth2.2: Setting MAC address to 00 0c 43 30 52 66.
  663. device eth2 entered promiscuous mode
  664. VLAN (eth2.2): Setting underlying device (eth2) to promiscious mode.
  665. LAN: Add LAN1 iface
  666. LAN: >>>>> Mode is 1, wan iface eth2.2, lan iface br0, adress 192.168.1.1 <<<<<
  667. BRSTP: Config br-stp:
  668. CRON: Starting crontab:
  669. DNSSERVER: Starting DNSMASQ:
  670. INETD: Starting inetd:
  671. SYSCTL: Tune with sysctl:
  672. SYSCTL: Tune network stack and memory usadge fo small memory devices
  673. net.core.rmem_max = 964608
  674. net.core.wmem_max = 964608
  675. vm.min_free_kbytes = 1536
  676. net.netfilter.nf_conntrack_max = 2048
  677. net.nf_conntrack_max = 2048
  678. net.ipv4.netfilter.ip_conntrack_max = 2048
  679. net.ipv4.route.max_size = 16384
  680. net.ipv4.ip_local_port_range = 3072 7168
  681. SYSCTL: ##conntrack max:##hashsize:##route max:##route max:##portrange:
  682. SYSCTL: ##2048##512##16384##3072 7168
  683. SYSCTL: Tune with proc
  684. WATCHDOG: Start watchdog
  685. fs fullreset
  686. Reset rwfs and nvram....
  687. Commit crc = 5d239295
  688. Commit crc = 6cc3c4b4
  689. Clear rwfs and reboot. Please go smoke...
  690. 2+0 records in
  691. 2+0 records out
  692. Restoring defaults...
  693. ~ #
  694. The system is going down NOW!
  695.  
  696. Sent SIGTERM to all processes
  697.  
  698. Sent SIGKILL to all processes
  699.  
  700. Requesting system reboot
  701. Restarting system.ั
  702.  
  703.  
  704. U-Boot 1.1.3 (Nov 12 2009 - 00:08:59)
  705.  
  706.  
  707. Board: Ralink APSoC DRAM: 16 MB
  708.  
  709. relocate_code Pointer at: 80fb4000
  710.  
  711. spi_wait_nsec: 3e
  712.  
  713. spi deice id: c2 20 16 c2 20 (2016c220)
  714.  
  715. find flash: mx25l3205d
  716.  
  717. raspi_read: from:30000 len:1000
  718.  
  719. raspi_read: from:30000 len:1000
  720.  
  721. ============================================
  722.  
  723. Ralink UBoot Version: 3.3
  724.  
  725. --------------------------------------------
  726.  
  727. ASIC 3052_MP2 (Port5<->None)
  728.  
  729. DRAM component: 128 Mbits SDR
  730.  
  731. DRAM bus: 16 bit
  732.  
  733. Total memory: 16 MBytes
  734.  
  735. Flash component: SPI Flash
  736.  
  737. Date:Nov 12 2009 Time:00:08:59
  738.  
  739. ============================================
  740.  
  741. icache: sets:256, ways:4, linesz:32 ,total:32768
  742.  
  743. dcache: sets:128, ways:4, linesz:32 ,total:16384
  744.  
  745.  
  746. ##### The CPU freq = 320 MHZ ####
  747.  
  748.  
  749. SDRAM bus set to 16 bit
  750.  
  751. SDRAM size =16 Mbytes
  752.  
  753. GPIO 10 not detect
  754.  
  755.  
  756. Please choose the operation:
  757.  
  758. 1: Load system code to SDRAM via TFTP.
  759.  
  760. 2: Load system code then write to Flash via TFTP.
  761.  
  762. 3: Boot system code via Flash (default).
  763.  
  764. 4: Entr boot command line interface.
  765.  
  766. 9: Load Boot Loader code then write to Flash via TFTP.
  767.  
  768.  1  0
  769.  
  770.  
  771.  
  772. 3: System Boot system code via Flash.
  773.  
  774. ## Booting image at bf050000 ...
  775.  
  776. raspi_read: from:50000 len:40
  777.  
  778. Image Name: RT-NL
  779.  
  780. Created: 2010-12-12 10:09:39 UTC
  781.  
  782. Image Type: MIPS Linux Kernel Image (lzma compressed)
  783.  
  784. Data Size: 3186624 Bytes = 3 MB
  785.  
  786. Load Address: 80000000
  787.  
  788. Entry Point: 80204000
  789.  
  790. raspi_read: from:50040 len:309fc0
  791.  
  792. Verifying Checksum ... OK
  793.  
  794. Uncompressing Kernel Image ... OK
  795.  
  796. No initrd
  797.  
  798. ## Transferring control to Linux (at address 80204000) ...
  799.  
  800. ## Giving linux memsize in MB, 16
  801.  
  802.  
  803. Starting kernel ...
  804.  
  805.  
  806.  
  807. LINUX started...
  808.  
  809. THIS IS ASIC
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!