Relevant things from /var/log/messages
---------------------------------------

May 25 22:38:04 lapdog kernel: PM: Syncing filesystems ...
May 25 22:38:04 lapdog kernel: ------------[ cut here ]------------
May 25 22:38:04 lapdog kernel: WARNING: at fs/fs-writeback.c:597 writeback_inodes_wb+0x229/0x380()
May 25 22:38:04 lapdog kernel: Hardware name: 2746CTO
May 25 22:38:04 lapdog kernel: Modules linked in: lenovo_sl_laptop vfat fat ipt_MASQUERADE iptable_nat nf_nat rfcomm sco bridge stp llc bnep l2cap sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 fuse kvm_intel kvm uinput snd_hda_codec_intelhdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_seq_dummy snd_seq_oss arc4 snd_seq_midi_event ecb snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss iwlagn iwlcore snd_pcm mmc_block snd_timer btusb snd mac80211 uvcvideo bluetooth videodev v4l1_compat soundcore v4l2_compat_ioctl32 r8169 i2400m_usb zaurus iTCO_wdt cdc_ether iTCO_vendor_support sdhci_pci sdhci i2400m usbnet ricoh_mmc cdc_acm cdc_wdm cfg80211 mmc_core wimax asus_laptop mii serio_raw joydev rfkill snd_page_alloc microcode sha256_generic cbc aes_x86_64 aes_generic xts gf128mul dm_crypt firewire_ohci firewire_core crc_itu_t i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan]
May 25 22:38:04 lapdog kernel: Pid: 2742, comm: flush-253:8 Not tainted 2.6.33.4-95.fc13.x86_64 #1
May 25 22:38:04 lapdog kernel: Call Trace:
May 25 22:38:04 lapdog kernel: [<ffffffff8104b558>] warn_slowpath_common+0x77/0x8f
May 25 22:38:04 lapdog kernel: [<ffffffff8104b57f>] warn_slowpath_null+0xf/0x11
May 25 22:38:04 lapdog kernel: [<ffffffff8111c3a7>] writeback_inodes_wb+0x229/0x380
May 25 22:38:04 lapdog kernel: [<ffffffff8111c63b>] wb_writeback+0x13d/0x1bc
May 25 22:38:04 lapdog kernel: [<ffffffff8109e283>] ? call_rcu_sched+0x10/0x12
May 25 22:38:04 lapdog kernel: [<ffffffff8109e28e>] ? call_rcu+0x9/0xb
May 25 22:38:04 lapdog kernel: [<ffffffff8111c7cf>] wb_do_writeback+0x69/0x14d
May 25 22:38:04 lapdog kernel: [<ffffffff8111c8ed>] bdi_writeback_task+0x3a/0xaa
May 25 22:38:04 lapdog kernel: [<ffffffff810d5cf8>] ? bdi_start_fn+0x0/0xd4
May 25 22:38:04 lapdog kernel: [<ffffffff810d5d64>] bdi_start_fn+0x6c/0xd4
May 25 22:38:04 lapdog kernel: [<ffffffff810d5cf8>] ? bdi_start_fn+0x0/0xd4
May 25 22:38:04 lapdog kernel: [<ffffffff810643c7>] kthread+0x7a/0x82
May 25 22:38:04 lapdog kernel: [<ffffffff8100a924>] kernel_thread_helper+0x4/0x10
May 25 22:38:04 lapdog kernel: [<ffffffff8106434d>] ? kthread+0x0/0x82
May 25 22:38:04 lapdog kernel: [<ffffffff8100a920>] ? kernel_thread_helper+0x0/0x10
May 25 22:38:04 lapdog kernel: ---[ end trace a12d497c3eb9d174 ]---




Entire dmesg (I see nothing useful.)
------------------------------------


Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33.4-95.fc13.x86_64 (mockbuild@x86-06.phx2.fedoraproject.org) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Thu May 13 05:16:23 UTC 2010
Command line: ro root=/dev/mapper/luks-b5e8c77b-7f48-4d38-975e-6cc20eeae01f rhgb quiet SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us i915.powersave=0
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
 BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bddb0000 (usable)
 BIOS-e820: 00000000bddb0000 - 00000000bddbe400 (ACPI data)
 BIOS-e820: 00000000bddbe400 - 00000000bddf0000 (ACPI NVS)
 BIOS-e820: 00000000bddf0000 - 00000000bde00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.5 present.
No AGP bridge found
last_pfn = 0xbddb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0BDE00000 mask FFFE00000 uncachable
  3 base 0BE000000 mask FFE000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3038MB, range: 2MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
total RAM covered: 3038M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 4  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3038MB, range: 2MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-00000000bddb0000
 0000000000 - 00bdc00000 page 2M
 00bdc00000 - 00bddb0000 page 4k
kernel direct mapping tables up to bddb0000 @ 8000-d000
RAMDISK: 3742d000 - 37fef0a3
ACPI: RSDP 00000000000f92e0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bddb0100 00084 (v01 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: FACP 00000000bddb0290 000F4 (v03 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: DSDT 00000000bddb0680 0BF09 (v01  LENOV TP-6A    00000180 INTL 20051117)
ACPI: FACS 00000000bddbe400 00040
ACPI: APIC 00000000bddb0390 0005C (v01 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: MCFG 00000000bddb0430 0003C (v01 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: SLIC 00000000bddb0470 00176 (v01 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: ECDT 00000000bddb0620 00054 (v01 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: DBGP 00000000bddb03f0 00034 (v01 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: BOOT 00000000bddb05f0 00028 (v01 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: OEMB 00000000bddbe440 00071 (v01 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: HPET 00000000bddbc590 00038 (v01 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: GSCI 00000000bddbe4c0 02024 (v01 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: ATKG 00000000bddc06f0 08024 (v01 LENOVO TP-6A    00000570 MSFT 00000097)
ACPI: SSDT 00000000bddc9240 004E6 (v01  PmRef TP-6A    00000180 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000000bddb0000
Bootmem setup node 0 0000000000000000-00000000bddb0000
  NODE_DATA [000000000000b000 - 0000000000020fff]
  bootmap [0000000000021000 -  0000000000038bb7] pages 18
(12 early reservations) ==> bootmem [0000000000 - 00bddb0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0001000000 - 0001dbb2c8]    TEXT DATA BSS ==> [0001000000 - 0001dbb2c8]
  #2 [003742d000 - 0037fef0a3]          RAMDISK ==> [003742d000 - 0037fef0a3]
  #3 [0001dbc000 - 0001dbc204]              BRK ==> [0001dbc000 - 0001dbc204]
  #4 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
  #5 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
  #6 [000009e800 - 00000e90e0]    BIOS reserved ==> [000009e800 - 00000e90e0]
  #7 [00000e92ac - 00000ff780]    BIOS reserved ==> [00000e92ac - 00000ff780]
  #8 [00000e90e0 - 00000e92ac]     MP-table mpc ==> [00000e90e0 - 00000e92ac]
  #9 [0000001000 - 0000003000]       TRAMPOLINE ==> [0000001000 - 0000003000]
  #10 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
  #11 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
 [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002200000-ffff880004bfffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009e
    0: 0x00000100 -> 0x000bddb0
On node 0 totalpages: 777550
  DMA zone: 56 pages used for memmap
  DMA zone: 106 pages reserved
  DMA zone: 3836 pages, LIFO batch:0
  DMA32 zone: 10576 pages used for memmap
  DMA32 zone: 762976 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
Allocating PCI resources starting at bde00000 (gap: bde00000:41000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s90520 r8192 d24168 u1048576
pcpu-alloc: s90520 r8192 d24168 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 766812
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/luks-b5e8c77b-7f48-4d38-975e-6cc20eeae01f rhgb quiet SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us i915.powersave=0
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3040448k/3110592k available (4296k kernel code, 392k absent, 69752k reserved, 7534k data, 764k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:424
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 31457280 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2393.443 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4786.88 BogoMIPS (lpj=2393443)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 0a
APIC calibration not consistent with PM-Timer: 138ms instead of 100ms
APIC delta adjusted to PM-Timer: 1662497 (2310852)
Booting Node   0, Processors  #1 Ok.
Brought up 2 CPUs
Total of 2 processors activated (9574.63 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=584 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=792 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=5968 bytes
devtmpfs: initialized
regulator: core version 0.5
Time: 19:12:22  Date: 05/25/10
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
ACPI Warning: Incorrect checksum in table [ATKG] - 36, should be 73 (20091214/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xbde00000-0xffffffff] (ignored)
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: reg 10: [mem 0xfd400000-0xfd7fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0x5c00-0x5c07]
pci 0000:00:02.1: reg 10: [mem 0xfd300000-0xfd3fffff 64bit]
pci 0000:00:1a.0: reg 20: [io  0x5880-0x589f]
pci 0000:00:1a.1: reg 20: [io  0x5800-0x581f]
pci 0000:00:1a.2: reg 20: [io  0x5480-0x549f]
pci 0000:00:1a.7: reg 10: [mem 0xfd8fbc00-0xfd8fbfff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfd8f4000-0xfd8f7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x5400-0x541f]
pci 0000:00:1d.1: reg 20: [io  0x5080-0x509f]
pci 0000:00:1d.2: reg 20: [io  0x5000-0x501f]
pci 0000:00:1d.7: reg 10: [mem 0xfd8fb800-0xfd8fbbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0x4c00-0x4c07]
pci 0000:00:1f.2: reg 14: [io  0x4880-0x4883]
pci 0000:00:1f.2: reg 18: [io  0x4800-0x4807]
pci 0000:00:1f.2: reg 1c: [io  0x4480-0x4483]
pci 0000:00:1f.2: reg 20: [io  0x4400-0x441f]
pci 0000:00:1f.2: reg 24: [mem 0xfd8fb000-0xfd8fb7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: reg 10: [mem 0xfd9fe000-0xfd9fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
pci 0000:00:1c.2:   bridge window [io  0x6000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xfda00000-0xfe9fffff]
pci 0000:00:1c.2:   bridge window [mem 0xfc700000-0xfcefffff 64bit pref]
pci 0000:0c:00.0: reg 10: [io  0xe800-0xe8ff]
pci 0000:0c:00.0: reg 18: [mem 0xfcfff000-0xfcffffff 64bit pref]
pci 0000:0c:00.0: reg 20: [mem 0xfcfe0000-0xfcfeffff 64bit pref]
pci 0000:0c:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.3:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.3:   bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
pci 0000:0d:00.0: reg 10: [mem 0xfebff800-0xfebfffff]
pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0d:00.0: PME# disabled
pci 0000:0d:00.1: reg 10: [mem 0xfebff400-0xfebff4ff]
pci 0000:0d:00.1: supports D1 D2
pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.1: PME# disabled
pci 0000:0d:00.2: reg 10: [mem 0xfebff000-0xfebff0ff]
pci 0000:0d:00.2: supports D1 D2
pci 0000:0d:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.2: PME# disabled
pci 0000:0d:00.3: reg 10: [mem 0xfebfec00-0xfebfecff]
pci 0000:0d:00.3: supports D1 D2
pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.3: PME# disabled
pci 0000:0d:00.4: reg 10: [mem 0xfebfe800-0xfebfe8ff]
pci 0000:0d:00.4: supports D1 D2
pci 0000:0d:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.4: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0c: disabling [mem 0xfd3f8000-0xfd3fafff] because it overlaps 0000:00:02.1 BAR 0 [mem 0xfd300000-0xfd3fffff 64bit]
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x0800-0x087f] has been reserved
system 00:08: [io  0x0400-0x041f] has been reserved
system 00:08: [io  0x0480-0x04bf] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
system 00:08: [mem 0xfed90000-0xfed90fff] has been reserved
system 00:08: [mem 0xfed91000-0xfed91fff] has been reserved
system 00:08: [mem 0xfed92000-0xfed92fff] has been reserved
system 00:08: [mem 0xfed93000-0xfed93fff] has been reserved
system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0a: [mem 0xffa00000-0xffbfffff] could not be reserved
system 00:0a: [mem 0xffe00000-0xffffffff] could not be reserved
system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0c: [io  0x0250-0x0253] has been reserved
system 00:0c: [io  0x0256-0x025f] has been reserved
system 00:0c: [io  0x0702-0x0703] has been reserved
system 00:0c: [io  0x04c0-0x04cf] has been reserved
system 00:0c: [io  0x04d2-0x04df] has been reserved
system 00:0c: [io  0x04e0-0x04ef] has been reserved
system 00:0c: [io  0x04f0-0x04ff] has been reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xf9efc000-0xf9efefff] has been reserved
system 00:0c: [mem 0xfd8f8000-0xfd8fafff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xbddfffff] could not be reserved
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  disabled]
pci 0000:00:1c.0:   bridge window [mem disabled]
pci 0000:00:1c.0:   bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  disabled]
pci 0000:00:1c.1:   bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:1c.1:   bridge window [mem pref disabled]
pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
pci 0000:00:1c.2:   bridge window [io  0x6000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xfda00000-0xfe9fffff]
pci 0000:00:1c.2:   bridge window [mem 0xfc700000-0xfcefffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.3:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.3:   bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:02: resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:03: resource 0 [io  0x6000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfda00000-0xfe9fffff]
pci_bus 0000:03: resource 2 [mem 0xfc700000-0xfcefffff 64bit pref]
pci_bus 0000:0c: resource 0 [io  0xe000-0xefff]
pci_bus 0000:0c: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:0c: resource 2 [mem 0xfcf00000-0xfcffffff 64bit pref]
pci_bus 0000:0d: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:0d: resource 3 [io  0x0000-0xffff]
pci_bus 0000:0d: resource 4 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 12040k freed
Simple Boot Flag at 0x51 set to 0x1
Intel PCLMULQDQ-NI instructions are not detected.
audit: initializing netlink socket (disabled)
type=2000 audit(1274814741.512:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5961
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
  alloc irq_desc for 27 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 17aa ss_did 20f3
pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
pci-stub: invalid id string ""
ACPI: AC Adapter [AC0] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI Warning: Incorrect checksum in table [SSDT] - 5C, should be EB (20091214/tbutils-314)
ACPI: SSDT 00000000bddc87f0 00244 (v01  PmRef TP-6A    00000180 INTL 20051117)
ACPI: SSDT 00000000bddc8ad0 00765 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
ACPI Warning: Incorrect checksum in table [SSDT] - 37, should be C7 (20091214/tbutils-314)
ACPI: SSDT 00000000bddc8720 000C8 (v01  PmRef TP-6A    00000180 INTL 20051117)
ACPI: SSDT 00000000bddc8a40 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20091214/nspredef-1040)
ACPI: Expecting a [Reference] package element, found type C
ACPI: Invalid passive threshold
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (44 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfd8fb000 port 0xfd8fb100 irq 28
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 28
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfd8fb000 port 0xfd8fb300 irq 28
ata6: SATA max UDMA/133 abar m2048@0xfd8fb000 port 0xfd8fb380 irq 28
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfd8fbc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.4-95.fc13.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfd8fb800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.4-95.fc13.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005880
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33.4-95.fc13.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00005800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33.4-95.fc13.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00005480
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.33.4-95.fc13.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005400
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.33.4-95.fc13.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.33.4-95.fc13.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.33.4-95.fc13.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
  Magic number: 10:57:244
rtc_cmos 00:03: setting system clock to 2010-05-25 19:12:22 UTC (1274814742)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
usb 1-2: new high speed USB device using ehci_hcd and address 2
ata1.00: ATA-8: WDC WD2500BEVS-08VAT2, 14.01A14, max UDMA/133
ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
usb 1-2: New USB device found, idVendor=8086, idProduct=1406
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: Intel(R) WiMAX Link 5150
usb 1-2: Manufacturer: Intel(R) Corporation
usb 2-5: new high speed USB device using ehci_hcd and address 2
ACPI: Battery Slot [BAT0] (battery present)
scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-0 14.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-5: New USB device found, idVendor=17ef, idProduct=4808
usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-5: Product: CNF7237&CNF7238
usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-5: SerialNumber: SN0001
usb 2-6: new high speed USB device using ehci_hcd and address 3
usb 2-6: New USB device found, idVendor=0bdb, idProduct=1900
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
usb 2-6: Manufacturer: Ericsson
usb 2-6: SerialNumber: 0115650005391880
Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
usb 5-1: new full speed USB device using uhci_hcd and address 2
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
usb 5-1: New USB device found, idVendor=0a5c, idProduct=2145
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: ThinkPad Bluetooth with Enhanced Data Rate II
usb 5-1: Manufacturer: Lenovo Computer Corp
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RE05, max UDMA/133
ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RE05 PQ: 0 ANSI: 5
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: New USB device found, idVendor=147e, idProduct=1000
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Fingerprint Sensor
usb 5-2: Manufacturer: TouchStrip
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 764k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1828k freed
Freeing unused kernel memory: 1960k freed
dracut: dracut-005-3.fc13
udev: starting version 151
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 29 for MSI/MSI-X
[drm] set up 31M of stolen space
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 106x30
fb0: inteldrmfb frame buffer device
registered panic notifier
ACPI Warning: _BQC returned an invalid level (20091214/video-634)
acpi device:1c: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
firewire_ohci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
firewire_ohci: Added fw-ohci device 0000:0d:00.0, OHCI version 1.0
firewire_core: created device fw0: GUID 001e8c0001eac6bc, S400
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input7
dracut: Scanning devices sda6  for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "ThinkpadSL500" using metadata type lvm2
dracut: 7 logical volume(s) in volume group "ThinkpadSL500" now active
dracut: luksOpen /dev/mapper/ThinkpadSL500-swap luks-b1ea1949-05c0-4b23-91fa-70659f2b69f5
padlock: VIA PadLock not detected.
dracut: luksOpen /dev/mapper/ThinkpadSL500-home luks-24ce73a8-bc8a-447c-af43-fc1549df2575
dracut: luksOpen /dev/mapper/ThinkpadSL500-fedora11_root luks-b5e8c77b-7f48-4d38-975e-6cc20eeae01f
dracut: luksOpen /dev/mapper/ThinkpadSL500-fedora11_usr luks-fdf7baee-27d7-4e59-84ca-10d5fc8c7664
EXT4-fs (dm-9): INFO: recovery required on readonly filesystem
EXT4-fs (dm-9): write access will be enabled during recovery
EXT4-fs (dm-9): recovery complete
EXT4-fs (dm-9): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/luks-b5e8c77b-7f48-4d38-975e-6cc20eeae01f
dracut: Loading SELinux policy
SELinux: 2048 avtab hash slots, 196497 rules.
SELinux: 2048 avtab hash slots, 196497 rules.
SELinux:  9 users, 13 roles, 3237 types, 157 bools, 1 sens, 1024 cats
SELinux:  77 classes, 196497 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-9, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1274814863.677:2): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 151
microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
asus_laptop: Asus Laptop Support version 0.42
asus_laptop: BSTS called, 0xe77e returned
asus_laptop:   BOXSTER model detected
input: Asus Laptop extra buttons as /devices/virtual/input/input8
asus_laptop: Brightness ignored, must be controlled by ACPI video driver
cdc_wdm 2-6:1.5: cdc-wdm0: USB WDM device
cdc_wdm 2-6:1.6: cdc-wdm1: USB WDM device
usbcore: registered new interface driver cdc_wdm
cdc_acm 2-6:1.1: ttyACM0: USB ACM device
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:0d:00.2 [1180:0843] (rev 12)
ricoh-mmc: Controller is now disabled.
cdc_acm 2-6:1.3: ttyACM1: USB ACM device
cdc_acm 2-6:1.9: ttyACM2: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
cfg80211: Calling CRDA to update world regulatory domain
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0d:00.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:0d:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
sdhci-pci 0000:0d:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0d:00.1] using DMA
iTCO_vendor_support: vendor-support=0
wwan0: register 'cdc_ether' at usb-0000:00:1d.7-6, Mobile Broadband Network Device, 02:80:37:ec:02:00
usbcore: registered new interface driver cdc_ether
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
usbcore: registered new interface driver zaurus
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0c:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:0c:00.0: setting latency timer to 64
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
r8169 0000:0c:00.0: irq 30 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc90023314000, 00:26:18:13:67:80, XID 1c4000c0 IRQ 30
i2400m_usb 1-2:1.0: WiMAX interface wmx0 (00:1d:e1:07:3e:04) ready
i2400m_usb 1-2:1.0: firmware: requesting i2400m-fw-usb-1.4.sbcf
Linux video capture interface: v2.00
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
uvcvideo: Found UVC 1.00 device CNF7237&CNF7238 (17ef:4808)
input: CNF7237&CNF7238 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
mmc0: new SDHC card at address 8fe4
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
mmcblk0: mmc0:8fe4 SD04G 3.69 GiB
 mmcblk0: p1
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.33.4-95.fc13.x86_64-kds
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:02:00.0: setting latency timer to 64
iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5150AGN REV=0x44
iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
  alloc irq_desc for 31 on node -1
  alloc kstat_irqs on node -1
iwlagn 0000:02:00.0: irq 31 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-agn-rs'
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 32 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
i2400m_usb 1-2:1.0: firmware interface version 9.2.0
usbcore: registered new interface driver i2400m_usb
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda5): using internal journal
EXT3-fs (sda5): mounted filesystem with ordered data mode
SELinux: initialized (dev sda5, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda7): using internal journal
EXT3-fs (sda7): mounted filesystem with ordered data mode
SELinux: initialized (dev sda7, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda8): using internal journal
EXT3-fs (sda8): mounted filesystem with ordered data mode
SELinux: initialized (dev sda8, type ext3), uses xattr
EXT4-fs (dm-8): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-8, type ext4), uses xattr
EXT4-fs (dm-10): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-10, type ext4), uses xattr
EXT4-fs (sda10): mounted filesystem with ordered data mode
SELinux: initialized (dev sda10, type ext4), uses xattr
fuse init (API version 7.13)
SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
SELinux: initialized (dev sda3, type fuseblk), uses genfs_contexts
SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts
Adding 2095124k swap on /dev/mapper/luks-b1ea1949-05c0-4b23-91fa-70659f2b69f5.  Priority:-1 extents:1 across:2095124k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts