Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- shell@android:/ $ dmesg
- >***********************
- <6>OMAP4430 ES2.3 type(HS)
- <6>id-code (6b95c02f)
- <6>Die-id (5B1E0026-00000001-0A3C0B63-09016008)
- <6>Prod-id (000DB95C-000600CC)
- <6>***********************
- <6>SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0x100000
- <3>FIXME: omap44xx_sram_init not implemented
- <6>Reserving 33554432 bytes SDRAM for VRAM
- <6>SMC: Allocated workspace of 3M at (0x9c900000)
- <6>PERCPU: Embedded 7 pages/cpu @c0e37000 s5632 r8192 d14848 u65536
- <6>pcpu-alloc: s5632 r8192 d14848 u65536 alloc=16*4096
- <6>pcpu-alloc: [0] 0 [0] 1
- <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
- <5>Kernel command line: androidboot.console=ttyO0 console=ttyO0,115200n8 mem=448M@0x80000000 mem=512M@0xA0000000 init=/init rootwait vram=32M,82000000 omapfb.vram=0:5M@82000000 root=/dev/mmcblk1p2 rw
- <6>PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>Memory: 448MB 256MB 256MB = 960MB total
- <5>Memory: 935244k/935244k available, 47796k reserved, 262144K highmem
- <5>Virtual kernel memory layout:
- <5> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5> DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- <5> vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
- <5> lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
- <5> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5> modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5> .init : 0xc0008000 - 0xc003d000 ( 212 kB)
- <5> .text : 0xc003d000 - 0xc053f000 (5128 kB)
- <5> .data : 0xc0540000 - 0xc05888c0 ( 291 kB)
- <6>SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- <6>Hierarchical RCU implementation.
- <6> RCU-based detection of stalled CPUs is disabled.
- <6> Verbose stalled-CPUs detection is disabled.
- <6>NR_IRQS:388
- <4>omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
- <4>omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
- <4>omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
- <4>omap_hwmod: dmic: resetting
- <4>omap_hwmod: dss_dsi1: cannot be enabled (3)
- <4>omap_hwmod: dss_dsi2: cannot be enabled (3)
- <4>omap_hwmod: dss_hdmi: cannot be enabled (3)
- <4>omap_hwmod: dss_rfbi: cannot be enabled (3)
- <4>omap_hwmod: dss_venc: cannot be enabled (3)
- <4>omap_hwmod: iva: failed to reset in 10000 usec
- <4>omap_hwmod: mailbox: resetting
- <4>omap_hwmod: omap-mcpdm-dai: cannot be enabled (3)
- <4>omap_hwmod: mcspi1: resetting
- <4>omap_hwmod: mcspi2: resetting
- <4>omap_hwmod: mcspi3: resetting
- <4>omap_hwmod: mcspi4: resetting
- <4>omap_hwmod: mmc1: resetting
- <4>omap_hwmod: mmc2: resetting
- <4>omap_hwmod: mmc3: resetting
- <4>omap_hwmod: mmc4: resetting
- <4>omap_hwmod: mmc5: resetting
- <4>omap_hwmod: timer3: resetting
- <4>omap_hwmod: timer4: resetting
- <4>omap_hwmod: timer5: resetting
- <4>omap_hwmod: timer6: resetting
- <4>omap_hwmod: timer7: resetting
- <4>omap_hwmod: timer8: resetting
- <4>omap_hwmod: timer9: resetting
- <4>omap_hwmod: timer11: resetting
- <6>GPMC revision 6.0
- <6>SmartReflex CLASS3 initialized
- <6>OMAP clockevent source: GPTIMER1 at 32768 Hz
- <4>Console: colour dummy device 80x30
- <6>Calibrating delay loop... 2013.49 BogoMIPS (lpj=7864320)
- <6>pid_max: default: 32768 minimum: 301
- <4>Mount-cache hash table entries: 512
- <6>CPU: Testing write buffer coherency: ok
- <6>Calibrating local timer...
- <6>50.00MHz.
- <6>L310 cache controller enabled
- <6>l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x1e470000
- <4>CPU1: Booted secondary processor
- <6>Brought up 2 CPUs
- <6>SMP: Total of 2 processors activated (4010.18 BogoMIPS).
- <6>devtmpfs: initialized
- <6>regulator: core version 0.5
- <6>NET: Registered protocol family 16
- <6>EMIF0 is enabled with IRQ142
- <6>EMIF1 is enabled with IRQ143
- <6>OMAP GPIO hardware version 0.1
- <6>ram_console: got buffer at a0000000, size 4000
- <6>ram_console: uncorrectable error in header
- <6>ram_console: no valid data in buffer (sig = 0x63209cdf)
- <6>console [ram-1] enabled
- <6>omap_mux_init: Add partition: #1: core, flags: 2
- <6>omap_mux_init: Add partition: #2: wkup, flags: 2
- <6>Board revision PVT
- <3>_omap_mux_init_signal: Could not set signal sys_pwron_reset_out
- <3>_omap_mux_init_signal: Could not set signal fref_clk3_req
- <6>Hynix DDR Memory
- <6>Reprogramming LPDDR2 timingsto 400000000 Hz
- <3>_omap_mux_init_signal: Could not set signal fref_clk0_out.gpio_wk6
- <3>_omap_mux_init_gpio: Could not set gpio4
- <4>board-4430sdp.c: kxtf9_dev_init ...
- <4>board-4430sdp.c: kxtf9_dev_init > Init kxtf9 irq pin 66 !
- <4>board-4430sdp.c: max17042_dev_init ...
- <4>board-4430sdp.c: max17042_dev_init > Init max17042 irq pin 65 !
- <4>max17042 GPIO pin read 1
- <6>init_display_led: evt2 hardware
- <3>res->start = 49022000
- <3>res->start = 49024000
- <3>res->start = 49026000
- <3>res->start = 48096000
- <6>OMAP DMA hardware revision 0.0
- <6>dma dma.0: System DMA registered
- <4>bio: create slab <bio-0> at 0
- <6>regulator: vdd_lcdtp: 3300 mV normal
- <6>i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz
- <4>Skipping twl internal clock init and using bootloader value (unknown osc rate)
- <6>twl6030: PIH (irq 39) chaining IRQs 368..387
- <6>regulator: VUSB: 3300 mV normal standby
- <6>twl6030_usb twl6030_usb: Initialized TWL6030 USB module
- <6>PC detected
- <6>regulator: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
- <6>regulator: VPP: 1800 <--> 2500 mV at 1700 mV normal standby
- <6>regulator: VANA: 2100 mV normal standby
- <6>regulator: VCXIO: 1800 mV normal standby
- <6>regulator: VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normal standby
- <6>regulator: VAUX3_6030: 1800 mV normal standby
- <6>regulator: CLK32KG: normal
- <6>i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
- <6>i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
- <6>i2c_omap i2c_omap.4: bus 4 rev4.0 at 400 kHz
- <6>Advanced Linux Sound Architecture Driver Version 1.0.23.
- <6>Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
- <6>Switching to clocksource timer-32k
- <6>musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
- <4>HS USB OTG: Cable detected at boot = 1
- <7>musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>musb_hdrc: MHDRC RTL version 2.0
- <7>musb_hdrc: setup fifo_mode 4
- <7>musb_hdrc: 28/31 max ep, 16384/16384 memory
- <6>musb_hdrc musb_hdrc: USB Peripheral mode controller at fc0ab000 using DMA, IRQ 124
- <6>NET: Registered protocol family 2
- <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- <6>TCP: Hash tables configured (established 131072 bind 65536)
- <6>TCP reno registered
- <6>UDP hash table entries: 512 (order: 2, 16384 bytes)
- <6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- <6>NET: Registered protocol family 1
- <6>Trying to unpack rootfs image as initramfs...
- <6>Freeing initrd memory: 160K
- <4>opp_add: no hwmod for hsi, cannot add OPPs.
- <3>unable to add OPP 98304000 Hz for hsi
- <4>opp_add: no hwmod for hsi, cannot add OPPs.
- <3>unable to add OPP 96000000 Hz for hsi
- <4>opp_add: no hwmod for hsi, cannot add OPPs.
- <3>unable to add OPP 96000000 Hz for hsi
- <6>ipu-power ipu0: Test of writing to the device message log,done from ipu_pm_init
- <6>ipu-power initialized ipu, major: 252, minor: 0
- <4>sdp4430_wifi_init: start
- <6>omap-iommu omap-iommu.0: ducati registered
- <6>omap-iommu omap-iommu.1: tesla registered
- <6>iovmm-omap initialized ducati, major: 251, base-minor: 0
- <6>iovmm-omap initialized tesla, major: 251, base-minor: 1
- <6>omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla
- <6>omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 250, base-minor: 0
- <6>omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0
- <6>omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 250, base-minor: 1
- <6>omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1
- <6>omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 250, base-minor: 2
- <4>highmem bounce pool size: 64 pages
- <6>ashmem: initialized
- <5>VFS: Disk quotas dquot_6.5.2
- <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- <6>msgmni has been set to 1314
- <6>SMC: Secure device detected, enabling SMC driver
- <6>Registering char device tf_driver (122:0)
- <6>alg: No test for stdrng (krng)
- <6>io scheduler noop registered
- <6>io scheduler deadline registered
- <6>io scheduler cfq registered (default)
- <6>OMAP DSS rev 4.0
- <6>OMAP DISPC rev 4.0
- <6>OMAP DSI rev 3.0
- <6>OMAP DSI2 rev 3.0
- <6>Enter hdmi_init()
- <6> boxer : boxer_lcd_init called , line 338
- <6> boxer : boxer_spi_probe called , line 310
- <6>boxer: spi setup returned : 0
- <6> boxer : boxer_panel_probe called , line 129
- <4>omap_smartreflex_disable_reset_volt: omap_sr struct for sr_core not found
- <4>omap_smartreflex_enable: omap_sr struct for sr_core not found
- <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- <6>omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
- <6>console [ttyO0] enabled
- <6>omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
- <6>omap-hsuart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
- <6>omap-hsuart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
- <6>brd: module loaded
- <6>loop: module loaded
- <6>android init
- <6>android_probe pdata: c0563eb8
- <6>android_bind
- <7>android_bind_config
- <6>android_usb gadget: android_usb ready
- <6>f_adb init
- <6>android_register_function adb
- <6>f_mass_storage init
- <6>fsg_probe pdev: c0563c00, pdata: c0563ea8
- <6>android_register_function usb_mass_storage
- <6>android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>android_usb gadget: Number of LUNs=2
- <6> lun0: LUN: removable file: (no medium)
- <6> lun1: LUN: removable file: (no medium)
- <6>adb_bind_config
- <6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
- <6>input: omap-keypad as /devices/platform/omap-keypad/input/input1
- <6>ft5x06_init() - FT I2C Touchscreen Driver (Built Jan 11 2012 @ 09:02:56)
- <6>ft5x06_probe() - FT5x06 found on I2C bus.
- <7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 39 to reset the Touch Panel...
- <4>omap_smartreflex_disable_reset_volt: omap_sr struct for sr_core not found
- <4>omap_smartreflex_enable: omap_sr struct for sr_core not found
- <6>input: ft5x06-i2c as /devices/platform/i2c_omap.2/i2c-2/2-0038/input/input2
- <6>ft5x06_initialize() - sysfs_create_group() succeeded.
- <6>kxtf9 1-000f: WHO_AM_I = 0x01
- <6>input: kxtf9_accel as /devices/virtual/input/input3
- <6>using rtc device, twl_rtc, for alarms
- <6>twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- <6>i2c /dev entries driver
- <6>Linux video capture interface: v2.00
- <4>max17042: max17042_init ...
- <4>max17042: max17042_probe ...
- <4>max17042: next history save at 4294936945
- <4>max17042: max17042_probe > IRQ is 225
- <4>max17042 GPIO pin read 1
- <4>max17042: max17042_device_power_on ...
- <6>android_usb gadget: high speed config #1: android
- <4>max17042: max17042_hw_init ...
- <4>max17042: BATTERY Detected!
- <4>config = 0x2214
- <4>Valert = 0xff9b
- <4>Salert = 0xff05
- <4>config = 0x2214
- <4>config = 0x2214
- <4>shdntimer = 0x0002
- <4>max17042: max17042_verify ...
- <6>max17042 1-0036: Version = 0x0092
- <6>max17042 1-0036: support ver. 1.0.0 enabled
- <4>MAX8903: Charger registering!
- <4>MAX8903: Charger Initializing...
- <4>MAX8903: Request CHARGER FLT IRQ successfully!
- <4>MAX8903: Charger detected at boot = 1
- <4>MAX8903: USB_EVENT_VBUS: Charger=5
- <6>OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
- <6>cpuidle: using governor ladder
- <6>cpuidle: using governor menu
- <6>omap_pwm_led omap_pwm_led: OMAP PWM LED (lcd-backlight) at GP timer 11/0
- <7>Registered led device: lcd-backlight
- <4>[BL set power] 1
- <6>logger: created 64K log 'log_main'
- <6>logger: created 256K log 'log_events'
- <6>logger: created 64K log 'log_radio'
- <6>logger: created 64K log 'log_system'
- <6>proc4430_drv_initializeModule
- <6>omap-devicehandler omap-devicehandler.0: omap_devh_probe: adding devh Tesla
- <6>omap-devh initialized Tesla, major: 241, base-minor: 0
- <6>omap-devicehandler omap-devicehandler.1: omap_devh_probe: adding devh SysM3
- <6>omap-devh initialized SysM3, major: 241, base-minor: 1
- <6>omap-devicehandler omap-devicehandler.2: omap_devh_probe: adding devh AppM3
- <6>omap-devh initialized AppM3, major: 241, base-minor: 2
- <6>omap3epd-sound: Audio SoC init
- <6>Found Board EVT 2.1-ABE support Enabled
- <6>asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
- <6>asoc: null-codec-dai <-> MultiMedia2 mapping ok
- <3>tlv320aic3100_init: Unable get gpio for CODEC POWER 101
- <6>mmc0: new high speed DDR MMC card at address 0001
- <6>mmcblk0: mmc0:0001 SEM16G 14.8 GiB
- <6> mmcblk0:
- <4>Alternate GPT is invalid, using primary GPT.
- <4> p1 (xloader) p2 (bootloader) p3 (recovery) p4 (boot) p5 (rom) p6 (bootdata) p7 (factory) p8 (system) p9 (cache) p10 (media) p11 (userdata)
- <1>##-tlv320aic3100_init
- <6>Created the sysfs Files for Audio Driver
- <4>Page 4 has 41 Coefficient Values
- <4>Page 8 has 61 Coefficient Values
- <4>Updated Page 8 DAC Coefficient Control Reg for Adaptive Mode
- <6>asoc: tlv320aic3100-dai <-> omap-mcbsp-dai.1 mapping ok
- <6>input: OMAP4_ACCLAIM_ABE Headset Jack as /devices/platform/soc-audio/sound/card0/input4
- <6>ALSA device list:
- <6> #0: OMAP4 Acclaim AIC3100 ABE
- <6>Netfilter messages via NETLINK v0.30.
- <6>nf_conntrack version 0.5.0 (14615 buckets, 58460 max)
- <4>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- <4>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- <4>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- <6>ctnetlink v0.93: registering with nfnetlink.
- <6>xt_time: kernel timezone is -0000
- <6>ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>arp_tables: (C) 2002 David S. Miller
- <6>TCP cubic registered
- <6>Initializing XFRM netlink socket
- <6>NET: Registered protocol family 10
- <6>lo: Disabled Privacy Extensions
- <6>Mobile IPv6
- <6>IPv6 over IPv4 tunneling driver
- <6>sit0: Disabled Privacy Extensions
- <6>ip6tnl0: Disabled Privacy Extensions
- <6>NET: Registered protocol family 17
- <6>NET: Registered protocol family 15
- <6>ThumbEE CPU extension supported.
- <4>omap_hwmod: Initialize debugfs support
- <3>Power Management for TI OMAP4.
- <6>prcm_clear_statdep_regs: Clearing static depndencies
- <3>CPUidle for CPU0 registered
- <3>CPUidle for CPU1 registered
- <4>sr_init: No PMIC hook to init smartreflex
- <6>smartreflex smartreflex.0: omap_smartreflex_probe: SmartReflex driver initialized
- <6>smartreflex smartreflex.1: omap_smartreflex_probe: SmartReflex driver initialized
- <6>smartreflex smartreflex.2: omap_smartreflex_probe: SmartReflex driver initialized
- <7>Disabling unused clock "auxclk4_src_ck"
- <7>Disabling unused clock "hdq1w_fck"
- <7>Disabling unused clock "gpmc_ick"
- <7>Disabling unused clock "gpio4_dbclk"
- <7>Disabling unused clock "efuse_ctrl_cust_fck"
- <6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- <4>mmc1: host does not support reading read-only switch. assuming write-enable.
- <6>mmc1: new high speed SDHC card at address 0007
- <6>mmcblk1: mmc1:0007 SD16G 14.9 GiB
- <6> mmcblk1: p1 p2 < p5 p6 p7 >
- <6> boxer : boxer_panel_enable called , line 233
- <6> boxer : boxer_panel_start called , line 150
- <6>regulator_init_complete: disabling VANA
- <6>twl_rtc twl_rtc: setting system clock to 2012-01-12 19:30:13 UTC (1326396613)
- <6>omap_vout omap_vout: : registered and initialized video device 0
- <6>omap_vout omap_vout: : registered and initialized video device 1
- <6>omap_vout omap_vout: : registered and initialized video device 2
- <6>omap_wb: registered and initialized wb device 4 [v4l2]
- <6>Freeing init memory: 212K
- <3>init: could not import file /system/etc/init.local.rc
- <3>init: cannot open '/initlogo.rle'
- <6>EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: errors=panic
- <6>EXT4-fs (mmcblk1p6): recovery complete
- <6>EXT4-fs (mmcblk1p6): mounted filesystem with ordered data mode. Opts: errors=panic
- <6>EXT4-fs (mmcblk1p7): recovery complete
- <6>EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. Opts: errors=panic
- <3>init: cannot find '/vendor/bin/pvrsrvinit', disabling 'pvrsrvinit'
- <6>warning: `adbd' uses 32-bit capabilities (legacy support in use)
- <6>enabling adb
- <6>adb_open
- <4>MAX8903: Charging is now enabled!
- <4>MAX8903: USB Charging at 500 mA
- <6>android_usb gadget: high speed config #1: android
- <3>init: untracked pid 1180 exited
Add Comment
Please, Sign In to add comment