Advertisement
Guest User

Untitled

a guest
Jul 24th, 2013
157
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.11 KB | None | 0 0
  1. CFE version 1.0.37-110.11-1 for BCM96368 (32bit,SP,BE)
  2. Build Date: 2011-04-12 17:31:15 (evan@broadcom_eu)
  3. Copyright (C) 2000-2009 Broadcom Corporation.
  4.  
  5. Parallel flash device: name MX29GL256EH, id 0x2222 size 32768KB
  6. Total Flash size: 32768K with 256 sectors
  7. Chip ID: BCM6368B2, MIPS: 400MHz
  8. Main Thread: TP0
  9. Total Memory: 67108864 bytes (64MB)
  10. Boot Address: 0xb8000000
  11.  
  12. Board IP address : 192.168.1.1:ffffff00
  13. Host IP address : 192.168.1.100
  14. Gateway IP address :
  15. Run from flash/host (f/h) : f
  16. Default host run file name : vmlinux
  17. Default host flash file name : bcm963xx_fs_kernel
  18. Boot delay (0-9 seconds) : 1
  19. Board Id (0-15) : 96368M-1541N
  20. Number of MAC Addresses (1-32) : 32
  21. Base MAC Address : 38:72:c0:d1:8b:9c
  22. PSI Size (1-64) KBytes : 24
  23. Enable Backup PSI [0|1] : 0
  24. System Log Size (0-256) KBytes : 0
  25. Main Thread Number [0|1] : 0
  26. Serial Number : 1173025UXXF-AG013267
  27. Default PSK key : Zauu3GqJJZVtWbKQe2uq
  28.  
  29. *** Press any key to stop auto run (1 seconds) ***
  30. Auto run second count down: 110
  31. Booting from only image (0xb8020000) ...
  32. Code Address: 0x80010000, Entry Address: 0x80010000
  33. LZMA: Prossible old LZMA format, trying to decompress..
  34. Decompression OK!
  35. Entry at 0x80010000
  36. Closing network.
  37. Disabling Switch ports.
  38. Flushing Receive Buffers...
  39. 94 buffers found.
  40. Closing DMA Channels.
  41. Starting program at 0x80010000
  42. [ 0.000000] Linux version 3.9.11 (pepe@debian) (gcc version 4.8.1 (OpenWrt/Linaro GCC 4.8-2013.04 r37490) ) #1 SMP Wed Jul 24 00:03:54 CEST 2013
  43. [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
  44. [ 0.000000] CPU frequency is 400 MHz
  45. [ 0.000000] 64MB of RAM installed
  46. [ 0.000000] registering 38 GPIOs
  47. [ 0.000000] board_bcm963xx: Boot address 0xb8000000
  48. [ 0.000000] board_bcm963xx: CFE version: 1.0.37-110.11-1
  49. [ 0.000000] bootconsole [early0] enabled
  50. [ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  51. [ 0.000000] board_bcm963xx: board name: 96368M-1541N
  52. [ 0.000000] Determined physical RAM map:
  53. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  54. [ 0.000000] Initrd not found or empty - disabling initrd
  55. [ 0.000000] PERCPU: Embedded 7 pages/cpu @81083000 s6496 r8192 d13984 u32768
  56. [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  57. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  58. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  59. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  60. [ 0.000000] __ex_table already sorted, skipping sort
  61. [ 0.000000] Memory: 61020k/65536k available (2672k kernel code, 4516k reserved, 643k data, 268k init, 0k highmem)
  62. [ 0.000000] Hierarchical RCU implementation.
  63. [ 0.000000] NR_IRQS:128
  64. [ 0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
  65. [ 0.032000] pid_max: default: 32768 minimum: 301
  66. [ 0.036000] Mount-cache hash table entries: 512
  67. [ 0.044000] SMP: Booting CPU1...
  68. [ 0.048000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  69. [ 0.080000] SMP: CPU1 is running
  70. [ 0.080000] Brought up 2 CPUs
  71. [ 0.100000] NET: Registered protocol family 16
  72. [ 0.112000] registering PCI controller with io_map_base unset
  73. [ 0.128000] bio: create slab <bio-0> at 0
  74. [ 0.132000] PCI host bridge to bus 0000:00
  75. [ 0.136000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  76. [ 0.140000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
  77. [ 0.144000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  78. [ 0.160000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
  79. [ 0.164000] Switching to clocksource MIPS
  80. [ 0.200000] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
  81. [ 0.264000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
  82. [ 0.272000] NET: Registered protocol family 2
  83. [ 0.280000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  84. [ 0.284000] TCP bind hash table entries: 512 (order: 0, 4096 bytes)
  85. [ 0.292000] TCP: Hash tables configured (established 512 bind 512)
  86. [ 0.300000] TCP: reno registered
  87. [ 0.304000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  88. [ 0.308000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  89. [ 0.316000] NET: Registered protocol family 1
  90. [ 0.324000] audit: initializing netlink socket (disabled)
  91. [ 0.328000] type=2000 audit(0.324:1): initialized
  92. [ 0.336000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  93. [ 0.344000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  94. [ 0.352000] msgmni has been set to 119
  95. [ 0.356000] io scheduler noop registered
  96. [ 0.360000] io scheduler deadline registered (default)
  97. [ 0.368000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10) is a bcm63xx_uart
  98. [ 0.376000] console [ttyS0] enabled, bootconsole disabled
  99. [ 0.376000] console [ttyS0] enabled, bootconsole disabled
  100. [ 0.392000] bcm63xx-rng bcm63xx-rng: registered RNG driver
  101. [ 0.400000] physmap platform flash device: 08000000 at 18000000
  102. [ 0.408000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
  103. [ 0.416000] Amd/Fujitsu Extended Query Table at 0x0040
  104. [ 0.424000] Amd/Fujitsu Extended Query version 1.3.
  105. [ 0.428000] number of CFI chips: 1
  106. [ 0.432000] bcm63xxpart: CFE boot tag found with version 6 and board type 96368M-1541N
  107. [ 0.440000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
  108. [ 0.448000] bcm63xxpart: Partition 1 is kernel offset 20100 and length 12ff00
  109. [ 0.452000] bcm63xxpart: Partition 2 is rootfs offset 150000 and length 1e90000
  110. [ 0.460000] bcm63xxpart: Partition 3 is nvram offset 1fe0000 and length 20000
  111. [ 0.468000] bcm63xxpart: Partition 4 is linux offset 20000 and length 1fc0000
  112. [ 0.476000] bcm63xxpart: Spare partition is offset 500004 and length 1adfffc
  113. [ 0.484000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
  114. [ 0.488000] Creating 5 MTD partitions on "physmap-flash.0":
  115. [ 0.496000] 0x000000000000-0x000000020000 : "CFE"
  116. [ 0.504000] 0x000000020100-0x000000150000 : "kernel"
  117. [ 0.508000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  118. [ 0.524000] 0x000000150000-0x000001fe0000 : "rootfs"
  119. [ 0.528000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  120. [ 0.544000] mtd: partition "rootfs" set to be root filesystem
  121. [ 0.552000] mtd: partition "rootfs_data" created automatically, ofs=500000, len=1AE0000
  122. [ 0.560000] 0x000000500000-0x000001fe0000 : "rootfs_data"
  123. [ 0.568000] 0x000001fe0000-0x000002000000 : "nvram"
  124. [ 0.576000] 0x000000020000-0x000001fe0000 : "linux"
  125. [ 0.584000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
  126. [ 0.636000] b53_common: found switch: BCM63xx, rev 0
  127. [ 0.644000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  128. [ 0.656000] TCP: cubic registered
  129. [ 0.656000] NET: Registered protocol family 17
  130. [ 0.664000] 8021q: 802.1Q VLAN Support v1.8
  131. [ 0.676000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  132. [ 0.688000] Freeing unused kernel memory: 268k freed
  133. procd: Console is alive
  134. procd: - watchdog -
  135. [ 2.596000] SCSI subsystem initialized
  136. [ 2.876000] usbcore: registered new interface driver usbfs
  137. [ 2.880000] usbcore: registered new interface driver hub
  138. [ 2.888000] usbcore: registered new device driver usb
  139. [ 3.676000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  140. [ 3.684000] ehci-platform: EHCI generic platform driver
  141. [ 3.792000] ehci-platform ehci-platform: EHCI Host Controller
  142. [ 3.796000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  143. [ 3.804000] ehci-platform ehci-platform: irq 15, io mem 0xb0001500
  144. [ 3.824000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
  145. [ 3.832000] hub 1-0:1.0: USB hub found
  146. [ 3.836000] hub 1-0:1.0: 2 ports detected
  147. [ 3.908000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  148. [ 3.916000] ohci-platform ohci-platform: Generic Platform OHCI Controller
  149. [ 3.924000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
  150. [ 3.932000] ohci-platform ohci-platform: irq 13, io mem 0xb0001600
  151. [ 3.996000] hub 2-0:1.0: USB hub found
  152. [ 4.000000] hub 2-0:1.0: 1 port detected
  153. [ 4.124000] Initializing USB Mass Storage driver...
  154. [ 4.132000] usbcore: registered new interface driver usb-storage
  155. [ 4.136000] USB Mass Storage support registered.
  156. [ 4.348000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
  157. procd: - preinit -
  158. ifconfig: SIOCGIFFLAGS: No such device
  159. Press the [f] key and hit [enter] to enter failsafe mode
  160. mount_root: jffs2 is not ready - marker found
  161. ifconfig: SIOCGIFFLAGS: No such device
  162. procd: - early -
  163. procd: - watchdog -
  164. procd: - init -
  165. Please press Enter to activate this console.
  166. [ 10.988000] NET: Registered protocol family 10
  167. [ 12.428000] wl: module license 'unspecified' taints kernel.
  168. [ 12.432000] Disabling lock debugging due to kernel taint
  169. [ 12.540000] SSB/BCMA glue driver successfully attached
  170. [ 12.728000] PPP generic driver version 2.4.2
  171. [ 13.248000] ip_tables: (C) 2000-2006 Netfilter Core Team
  172. [ 13.280000] xt_time: kernel timezone is -0000
  173. [ 13.460000] NET: Registered protocol family 24
  174. [ 13.600000] nf_conntrack version 0.5.0 (957 buckets, 3828 max)
  175. [ 14.880000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  176. [ 19.600000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port3, 100Mbps, full-duplex
  177. [ 21.024000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port3, 100Mbps, full-duplex
  178. [ 21.040000] device eth0.1 entered promiscuous mode
  179. [ 21.044000] device eth0 entered promiscuous mode
  180. [ 21.052000] br-lan: port 1(eth0.1) entered forwarding state
  181. [ 21.056000] br-lan: port 1(eth0.1) entered forwarding state
  182. [ 22.016000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  183. [ 23.060000] br-lan: port 1(eth0.1) entered forwarding state
  184.  
  185.  
  186.  
  187. BusyBox v1.19.4 (2013-07-21 17:13:14 CEST) built-in shell (ash)
  188. Enter 'help' for a list of built-in commands.
  189.  
  190. _______ ________ __
  191. | |.-----.-----.-----.| | | |.----.| |_
  192. | - || _ | -__| || | | || _|| _|
  193. |_______|| __|_____|__|__||________||__| |____|
  194. |__| W I R E L E S S F R E E D O M
  195. -----------------------------------------------------
  196. BARRIER BREAKER (Bleeding Edge, r37518)
  197. ------­©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©HRŠz’zéGalliano Pour all ingredients into
  198. * 4 oz cold Coffee an irish coffee mug filled
  199. * 1 1/2 oz Dark Rum with crushed ice. Stir.
  200. * 2 tsp. Creme de Cacao
  201. -----------------------------------------------------
  202. root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement