Guest User

Untitled

a guest
Jul 24th, 2021
69
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. G12A:BL:0253b8:61aa2d;FEAT:E0F83180:2000;POC:F;RCY:0;EMMC:0;READ:0;CHK:1F;READ:0;CHK:1F;READ:0;CHK:1F;SD?:0;SD:0;READ:0;0.0
  2. bl2_stage_init 0x01
  3. bl2_stage_init 0x81
  4. hw id: 0x0001 - pwm id 0x00
  5. bl2_stage_init 0xc0
  6. bl2_stage_init 0x02
  7.  
  8. no sdio debug board detected
  9. L0:00000000
  10. L1:00000703
  11. L2:00008067
  12. L3:04000000
  13. S1:00000000
  14. B2:00002000
  15. B1:e0f83180
  16.  
  17. TE: 293894
  18.  
  19. BL2 Built : 15:21:48, Aug 28 2019. g12a g1bf2b53 - luan.yuan@droid15-sz
  20.  
  21. Board ID = 2
  22. Set cpu clk to 24M
  23. Set clk81 to 24M
  24. CPU clk: 1200 MHz
  25. Set clk81 to 166.6M
  26. DDR driver_vesion: LPDDR4_PHY_V_0_1_18 build time: Aug 28 2019 15:21:45
  27. board id: 2
  28. Load FIP HDR from SD, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  29. fw parse done
  30. Load ddrfw from SD, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
  31. Load ddrfw from SD, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
  32. PIEI prepare done
  33. fastboot data load
  34. fastboot data verify
  35. verify result: 266
  36. Cfg max: 2, cur: 1. Board id: 255. Force loop cfg
  37. LPDDR4 probe
  38. ddr clk to 792MHz
  39. Load ddrfw from SD, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  40.  
  41. dmc_version 0000
  42. Check phy result
  43. INFO : End of CA training
  44. INFO : End of initialization
  45. INFO : Training has run successfully!
  46. Check phy result
  47. INFO : End of initialization
  48. INFO : End of read enable training
  49. INFO : End of fine write leveling
  50. INFO : End of Write leveling coarse delay
  51. INFO : Training has run successfully!
  52. Check phy result
  53. INFO : End of initialization
  54. INFO : End of read dq deskew training
  55. INFO : End of MPR read delay center optimization
  56. INFO : End of write delay center optimization
  57. INFO : End of read delay center optimization
  58. INFO : End of max read latency training
  59. INFO : Training has run successfully!
  60. 1D training succeed
  61. Load ddrfw from SD, src: 0x00048200, des: 0xfffd0000, size: 0x0000c000, part: 0
  62. Check phy result
  63. INFO : End of initialization
  64. INFO : End of 2D read delay Voltage center optimization
  65. INFO : End of 2D read delay Voltage center optimization
  66. INFO : End of 2D write delay Voltage center optimization
  67. INFO : End of 2D write delay Voltage center optimization
  68. INFO : Training has run successfully!
  69.  
  70. channel==0
  71. RxClkDly_Margin_A0==236 ps 12
  72. TxDqDly_Margin_A0==236 ps 12
  73. RxClkDly_Margin_A1==256 ps 13
  74. TxDqDly_Margin_A1==216 ps 11
  75. TrainedVREFDQ_A0==74
  76. TrainedVREFDQ_A1==74
  77. VrefDac_Margin_A0==32
  78. DeviceVref_Margin_A0==40
  79. VrefDac_Margin_A1==32
  80. DeviceVref_Margin_A1==40
  81.  
  82.  
  83. channel==1
  84. RxClkDly_Margin_A0==236 ps 12
  85. TxDqDly_Margin_A0==236 ps 12
  86. RxClkDly_Margin_A1==256 ps 13
  87. TxDqDly_Margin_A1==236 ps 12
  88. TrainedVREFDQ_A0==74
  89. TrainedVREFDQ_A1==74
  90. VrefDac_Margin_A0==32
  91. DeviceVref_Margin_A0==40
  92. VrefDac_Margin_A1==30
  93. DeviceVref_Margin_A1==40
  94.  
  95. dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
  96.  
  97. soc_vref_reg_value 0x 0000001a 0000001c 0000001a 0000001c 0000001a 0000001c 0000001c 0000001a 0000001b 0000001a 0000001b 0000001a 0000001c 0000001d 0000001c 0000001d 0000001b 0000001b 0000001a 0000001a 0000001c 0000001d 0000001c 0000001e 0000001a 00000019 0000001a 0000001b 0000001a 0000001a 0000001b 0000001d dram_vref_reg_value 0x 0000005a
  98. 2D training succeed
  99. aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_18 build time: Aug 28 2019 13:53:31
  100. auto size-- 65535DDR cs0 size: 1024MB
  101. DDR cs1 size: 1024MB
  102. DMC_DDR_CTRL: 00e0001bDDR size: 2048MB
  103. cs0 DataBus test pass
  104. cs1 DataBus test pass
  105. cs0 AddrBus test pass
  106. cs1 AddrBus test pass
  107.  
  108. 100bdlr_step_size ps== 460
  109. result report
  110. boot times 0Enable ddr reg access
  111. Load FIP HDR from SD, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  112. Load BL3X from SD, src: 0x0006c200, des: 0x0175c000, size: 0x00098000, part: 0
  113. bl2z: ptr: 05129330, size: 00001e40
  114. 0.0;M3 CHK:0;cm4_sp_mode 0
  115. MVN_1=0x00000000
  116. MVN_2=0x00000000
  117. [Image: g12a_v1.1.3390-6ac5299 2019-09-26 14:09:46 luan.yuan@droid15-sz]
  118. OPS=0x30
  119. ring efuse init
  120. 28 0b 30 00 01 08 12 00 00 14 35 39 53 42 56 50
  121. [0.017149 Inits done]
  122. secure task start!
  123. high task start!
  124. low task start!
  125. run into bl31
  126. NOTICE: BL31: v1.3(release):4fc40b1
  127. NOTICE: BL31: Built : 15:57:33, May 22 2019
  128. NOTICE: BL31: G12A normal boot!
  129. NOTICE: BL31: BL33 decompress pass
  130. ERROR: Error initializing runtime service opteed_fast
  131.  
  132.  
  133. U-Boot 2021.07 (Jul 23 2021 - 13:00:14 +0200) radxazero
  134.  
  135. Model: Radxa Zero
  136. SoC: Amlogic Meson G12A (Unknown) Revision 28:b (30:2)
  137. DRAM: 2 GiB
  138. MMC: sd@ffe03000: 0, sd@ffe05000: 1, mmc@ffe07000: 2
  139. Loading Environment from nowhere... OK
  140. In: serial
  141. Out: serial
  142. Err: serial
  143. Net: No ethernet found.
  144. Hit any key to stop autoboot: 0
  145. Card did not respond to voltage select! : -110
  146. switch to partitions #0, OK
  147. mmc1 is current device
  148. Scanning mmc 1:1...
  149. Found U-Boot script /boot.scr
  150. 1444 bytes read in 2 ms (705.1 KiB/s)
  151. ## Executing script at 08000000
  152. 20510728 bytes read in 875 ms (22.4 MiB/s)
  153. Failed to load '/g12a_dtb'
  154. 49374 bytes read in 4 ms (11.8 MiB/s)
  155. Failed to load '/initramfs-linux.img'
  156. Moving Image from 0x8080000 to 0x8200000, end=99f0000
  157. ## Flattened Device Tree blob at 08008000
  158. Booting using the fdt blob at 0x8008000
  159. Loading Device Tree to 000000003fff0000, end 000000003fffffff ... OK
  160.  
  161. Starting kernel ...
  162.  
  163. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  164. [ 0.000000] Linux version 5.13.4 (piotro@minimyth-armv8) (aarch64-minimyth-linux-gnu-gcc (GCC) 10.3.0, GNU ld (GNU Binutils) 2.36) #1 SMP PREEMPT Fri Jul 23 15:17:12 CEST 2021
  165. [ 0.000000] Machine model: Radxa Zero
  166. [ 0.000000] earlycon: meson0 at MMIO 0x00000000ff803000 (options '115200n8')
  167. [ 0.000000] printk: bootconsole [meson0] enabled
  168. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@5000000': base 0x0000000005000000, size 3 MiB
  169. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000047800000, size 896 MiB
  170. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  171. [ 0.000000] Zone ranges:
  172. [ 0.000000] DMA [mem 0x0000000000000000-0x000000007f806fff]
  173. [ 0.000000] DMA32 empty
  174. [ 0.000000] Normal empty
  175. [ 0.000000] Movable zone start for each node
  176. [ 0.000000] Early memory node ranges
  177. [ 0.000000] node 0: [mem 0x0000000000000000-0x00000000052fffff]
  178. [ 0.000000] node 0: [mem 0x0000000005300000-0x00000000072fffff]
  179. [ 0.000000] node 0: [mem 0x0000000007300000-0x000000007f806fff]
  180. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007f806fff]
  181. [ 0.000000] On node 0 totalpages: 522247
  182. [ 0.000000] DMA zone: 8161 pages used for memmap
  183. [ 0.000000] DMA zone: 0 pages reserved
  184. [ 0.000000] DMA zone: 522247 pages, LIFO batch:63
  185. [ 0.000000] On node 0, zone DMA: 1017 pages in unavailable ranges
  186. [ 0.000000] psci: probing for conduit method from DT.
  187. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  188. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  189. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  190. [ 0.000000] psci: SMC Calling Convention v1.1
  191. [ 0.000000] percpu: Embedded 23 pages/cpu s57296 r8192 d28720 u94208
  192. [ 0.000000] pcpu-alloc: s57296 r8192 d28720 u94208 alloc=23*4096
  193. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  194. [ 0.000000] Detected VIPT I-cache on CPU0
  195. [ 0.000000] CPU features: detected: ARM erratum 845719
  196. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 514086
  197. [ 0.000000] Kernel command line: root=PARTUUID=346d1a6a-02 rw rootwait earlycon debug MM_DEBUG=yes
  198. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  199. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  200. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  201. [ 0.000000] Memory: 1070440K/2088988K available (11584K kernel code, 1854K rwdata, 4392K rodata, 2112K init, 4444K bss, 101044K reserved, 917504K cma-reserved)
  202. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  203. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  204. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  205. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  206. [ 0.000000] Tracing variant of Tasks RCU enabled.
  207. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  208. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  209. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  210. [ 0.000000] Root IRQ handler: gic_handle_irq
  211. [ 0.000000] GIC: Using split EOI/Deactivate mode
  212. [ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  213. [ 0.000000] random: get_random_bytes called from start_kernel+0x5e0/0x7d0 with crng_init=0
  214. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  215. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  216. [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  217. [ 0.008279] Console: colour dummy device 80x25
  218. [ 0.012524] printk: console [tty0] enabled
  219. [ 0.016629] printk: bootconsole [meson0] disabled
  220. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  221. [ 0.000000] Linux version 5.13.4 (piotro@minimyth-armv8) (aarch64-minimyth-linux-gnu-gcc (GCC) 10.3.0, GNU ld (GNU Binutils) 2.36) #1 SMP PREEMPT Fri Jul 23 15:17:12 CEST 2021
  222. [ 0.000000] Machine model: Radxa Zero
  223. [ 0.000000] earlycon: meson0 at MMIO 0x00000000ff803000 (options '115200n8')
  224. [ 0.000000] printk: bootconsole [meson0] enabled
  225. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@5000000': base 0x0000000005000000, size 3 MiB
  226. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000047800000, size 896 MiB
  227. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  228. [ 0.000000] Zone ranges:
  229. [ 0.000000] DMA [mem 0x0000000000000000-0x000000007f806fff]
  230. [ 0.000000] DMA32 empty
  231. [ 0.000000] Normal empty
  232. [ 0.000000] Movable zone start for each node
  233. [ 0.000000] Early memory node ranges
  234. [ 0.000000] node 0: [mem 0x0000000000000000-0x00000000052fffff]
  235. [ 0.000000] node 0: [mem 0x0000000005300000-0x00000000072fffff]
  236. [ 0.000000] node 0: [mem 0x0000000007300000-0x000000007f806fff]
  237. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007f806fff]
  238. [ 0.000000] On node 0 totalpages: 522247
  239. [ 0.000000] DMA zone: 8161 pages used for memmap
  240. [ 0.000000] DMA zone: 0 pages reserved
  241. [ 0.000000] DMA zone: 522247 pages, LIFO batch:63
  242. [ 0.000000] On node 0, zone DMA: 1017 pages in unavailable ranges
  243. [ 0.000000] psci: probing for conduit method from DT.
  244. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  245. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  246. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  247. [ 0.000000] psci: SMC Calling Convention v1.1
  248. [ 0.000000] percpu: Embedded 23 pages/cpu s57296 r8192 d28720 u94208
  249. [ 0.000000] pcpu-alloc: s57296 r8192 d28720 u94208 alloc=23*4096
  250. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  251. [ 0.000000] Detected VIPT I-cache on CPU0
  252. [ 0.000000] CPU features: detected: ARM erratum 845719
  253. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 514086
  254. [ 0.000000] Kernel command line: root=PARTUUID=346d1a6a-02 rw rootwait earlycon debug MM_DEBUG=yes
  255. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  256. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  257. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  258. [ 0.000000] Memory: 1070440K/2088988K available (11584K kernel code, 1854K rwdata, 4392K rodata, 2112K init, 4444K bss, 101044K reserved, 917504K cma-reserved)
  259. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  260. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  261. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  262. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  263. [ 0.000000] Tracing variant of Tasks RCU enabled.
  264. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  265. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  266. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  267. [ 0.000000] Root IRQ handler: gic_handle_irq
  268. [ 0.000000] GIC: Using split EOI/Deactivate mode
  269. [ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  270. [ 0.000000] random: get_random_bytes called from start_kernel+0x5e0/0x7d0 with crng_init=0
  271. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  272. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  273. [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  274. [ 0.008279] Console: colour dummy device 80x25
  275. [ 0.012524] printk: console [tty0] enabled
  276. [ 0.016629] printk: bootconsole [meson0] disabled
  277. [ 0.021357] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  278. [ 0.021421] ... MAX_LOCKDEP_SUBCLASSES: 8
  279. [ 0.021458] ... MAX_LOCK_DEPTH: 48
  280. [ 0.021496] ... MAX_LOCKDEP_KEYS: 8192
  281. [ 0.021535] ... CLASSHASH_SIZE: 4096
  282. [ 0.021575] ... MAX_LOCKDEP_ENTRIES: 32768
  283. [ 0.021614] ... MAX_LOCKDEP_CHAINS: 65536
  284. [ 0.021654] ... CHAINHASH_SIZE: 32768
  285. [ 0.021693] memory used by lock dependency info: 3637 kB
  286. [ 0.021739] per task-struct memory footprint: 1920 bytes
  287. [ 0.021818] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  288. [ 0.021908] pid_max: default: 32768 minimum: 301
  289. [ 0.022117] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  290. [ 0.022192] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  291. [ 0.025587] rcu: Hierarchical SRCU implementation.
  292. [ 0.027146] smp: Bringing up secondary CPUs ...
  293. [ 0.028322] Detected VIPT I-cache on CPU1
  294. [ 0.028403] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  295. [ 0.029788] Detected VIPT I-cache on CPU2
  296. [ 0.029839] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  297. [ 0.031024] Detected VIPT I-cache on CPU3
  298. [ 0.031068] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  299. [ 0.031253] smp: Brought up 1 node, 4 CPUs
  300. [ 0.031549] SMP: Total of 4 processors activated.
  301. [ 0.031593] CPU features: detected: 32-bit EL0 Support
  302. [ 0.031641] CPU features: detected: CRC32 instructions
  303. [ 0.045593] CPU: All CPU(s) started at EL2
  304. [ 0.045710] alternatives: patching kernel code
  305. [ 0.047105] devtmpfs: initialized
  306. [ 0.075400] KASLR disabled due to lack of seed
  307. [ 0.075867] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  308. [ 0.075964] futex hash table entries: 1024 (order: 5, 131072 bytes, linear)
  309. [ 0.108567] pinctrl core: initialized pinctrl subsystem
  310. [ 0.110732] NET: Registered protocol family 16
  311. [ 0.114260] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
  312. [ 0.114600] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  313. [ 0.115027] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  314. [ 0.116361] thermal_sys: Registered thermal governor 'step_wise'
  315. [ 0.117260] cpuidle: using governor menu
  316. [ 0.117508] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  317. [ 0.117740] ASID allocator initialised with 65536 entries
  318. [ 0.208260] cryptd: max_cpu_qlen set to 1000
  319. [ 0.213587] reg-fixed-voltage regulator-ao_5v: Failed to register regulator: -517
  320. [ 0.214368] reg-fixed-voltage regulator-emmc_1v8: Failed to register regulator: -517
  321. [ 0.214656] VDDAO_3V3: supplied by DC_IN
  322. [ 0.216117] VDDIO_AO1V8: supplied by VDDAO_3V3
  323. [ 0.217276] iommu: Default domain type: Translated
  324. [ 0.217718] vgaarb: loaded
  325. [ 0.218428] SCSI subsystem initialized
  326. [ 0.218910] usbcore: registered new interface driver usbfs
  327. [ 0.219078] usbcore: registered new interface driver hub
  328. [ 0.219203] usbcore: registered new device driver usb
  329. [ 0.220040] mc: Linux media interface: v0.10
  330. [ 0.220137] videodev: Linux video capture interface: v2.00
  331. [ 0.220478] pps_core: LinuxPPS API ver. 1 registered
  332. [ 0.220525] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  333. [ 0.221449] Advanced Linux Sound Architecture Driver Initialized.
  334. [ 0.223138] clocksource: Switched to clocksource arch_sys_counter
  335. [ 0.223808] FS-Cache: Loaded
  336. [ 0.240347] NET: Registered protocol family 2
  337. [ 0.240637] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  338. [ 0.242264] tcp_listen_portaddr_hash hash table entries: 1024 (order: 4, 81920 bytes, linear)
  339. [ 0.242585] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  340. [ 0.242849] TCP bind hash table entries: 16384 (order: 8, 1179648 bytes, linear)
  341. [ 0.244645] TCP: Hash tables configured (established 16384 bind 16384)
  342. [ 0.245113] UDP hash table entries: 1024 (order: 5, 163840 bytes, linear)
  343. [ 0.245428] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes, linear)
  344. [ 0.246034] NET: Registered protocol family 1
  345. [ 0.247182] RPC: Registered named UNIX socket transport module.
  346. [ 0.247241] RPC: Registered udp transport module.
  347. [ 0.247285] RPC: Registered tcp transport module.
  348. [ 0.247328] RPC: Registered tcp NFSv4.1 backchannel transport module.
  349. [ 0.247392] PCI: CLS 0 bytes, default 64
  350. [ 0.259296] Initialise system trusted keyrings
  351. [ 0.259731] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  352. [ 0.280785] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  353. [ 0.281370] FS-Cache: Netfs 'nfs' registered for caching
  354. [ 0.282582] NFS: Registering the id_resolver key type
  355. [ 0.282680] Key type id_resolver registered
  356. [ 0.282723] Key type id_legacy registered
  357. [ 0.282991] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  358. [ 0.283071] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  359. [ 0.284189] FS-Cache: Netfs 'cifs' registered for caching
  360. [ 0.284928] Key type cifs.idmap registered
  361. [ 0.322831] NET: Registered protocol family 38
  362. [ 0.322917] Key type asymmetric registered
  363. [ 0.322978] Asymmetric key parser 'x509' registered
  364. [ 0.323083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  365. [ 0.323444] io scheduler mq-deadline registered
  366. [ 0.323491] io scheduler kyber registered
  367. [ 0.352424] soc soc0: Amlogic Meson G12A (Unknown) Revision 28:b (30:2) Detected
  368. [ 0.354604] VDDCPU: supplied by regulator-dummy
  369. [ 0.358168] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 24, base_baud = 1500000) is a meson_uart
  370. [ 1.209305] printk: console [ttyAML0] enabled
  371. [ 1.215362] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 30, base_baud = 1500000) is a meson_uart
  372. [ 1.223224] serial serial0: tty port ttyAML6 registered
  373. [ 1.253129] brd: module loaded
  374. [ 1.253532] loop: module loaded
  375. [ 1.349019] Loading iSCSI transport class v2.0-870.
  376. [ 1.350423] iscsi: registered transport (tcp)
  377. [ 1.354298] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
  378. [ 1.360469] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
  379. [ 1.371586] libphy: Fixed MDIO Bus: probed
  380. [ 1.376403] tun: Universal TUN/TAP device driver, 1.6
  381. [ 1.380368] usbcore: registered new interface driver rtl8150
  382. [ 1.384656] usbcore: registered new interface driver r8152
  383. [ 1.391784] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  384. [ 1.396470] ehci-platform: EHCI generic platform driver
  385. [ 1.401911] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  386. [ 1.407804] ohci-platform: OHCI generic platform driver
  387. [ 1.414000] usbcore: registered new interface driver uas
  388. [ 1.418291] usbcore: registered new interface driver usb-storage
  389. [ 1.424616] mousedev: PS/2 mouse device common for all mice
  390. [ 1.430388] i2c /dev entries driver
  391. [ 1.436815] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present!
  392. [ 1.460353] meson-gx-mmc ffe05000.sd: Got CD GPIO
  393. [ 1.460362] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
  394. [ 1.465100] ledtrig-cpu: registered to indicate activity on CPUs
  395. [ 1.472092] meson-sm: secure-monitor enabled
  396. [ 1.475778] hid: raw HID events driver (C) Jiri Kosina
  397. [ 1.481989] usbcore: registered new interface driver usbhid
  398. [ 1.485749] usbhid: USB HID core driver
  399. [ 1.522238] NET: Registered protocol family 10
  400. [ 1.523704] Segment Routing with IPv6
  401. [ 1.524760] NET: Registered protocol family 17
  402. [ 1.529551] Key type dns_resolver registered
  403. [ 1.533987] Loading compiled-in X.509 certificates
  404. [ 1.543299] mmc0: new high speed SDXC card at address 59b4
  405. [ 1.544770] mmcblk0: mmc0:59b4 SDU1 58.2 GiB
  406. [ 1.549831] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  407. [ 1.555592] mmcblk0: p1 p2
  408. [ 1.556303] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  409. [ 1.565131] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  410. [ 1.570793] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  411. [ 1.577118] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
  412. [ 1.590729] AO_5V: supplied by DC_IN
  413. [ 1.591478] EMMC_1V8: supplied by VDDAO_3V3
  414. [ 1.593593] VDDAO_3V3_T: supplied by VDDAO_3V3
  415. [ 1.659880] random: fast init done
  416. [ 1.668438] mmc2: new ultra high speed SDR50 SDIO card at address 0001
  417. [ 1.692753] meson-drm ff900000.vpu: Queued 2 outputs on vpu
  418. [ 1.693788] meson-drm ff900000.vpu: CVBS Output connector not available
  419. [ 1.727275] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
  420. [ 1.732180] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
  421. [ 1.740042] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops)
  422. [ 1.747613] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
  423. [ 2.116553] Console: switching to colour frame buffer device 240x67
  424. [ 2.144624] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
  425. [ 2.155107] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
  426. [ 2.156870] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
  427. [ 2.166051] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
  428. [ 2.169434] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
  429. [ 2.176601] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
  430. [ 2.185598] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  431. [ 2.188797] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1
  432. [ 2.196440] xhci-hcd xhci-hcd.2.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
  433. [ 2.205670] xhci-hcd xhci-hcd.2.auto: irq 39, io mem 0xff500000
  434. [ 2.212090] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
  435. [ 2.219645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  436. [ 2.226757] usb usb1: Product: xHCI Host Controller
  437. [ 2.231579] usb usb1: Manufacturer: Linux 5.13.4 xhci-hcd
  438. [ 2.236906] usb usb1: SerialNumber: xhci-hcd.2.auto
  439. [ 2.242653] hub 1-0:1.0: USB hub found
  440. [ 2.245491] hub 1-0:1.0: 2 ports detected
  441. [ 2.250085] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  442. [ 2.254901] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2
  443. [ 2.262485] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
  444. [ 2.269045] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  445. [ 2.277334] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
  446. [ 2.285192] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  447. [ 2.292307] usb usb2: Product: xHCI Host Controller
  448. [ 2.297127] usb usb2: Manufacturer: Linux 5.13.4 xhci-hcd
  449. [ 2.302456] usb usb2: SerialNumber: xhci-hcd.2.auto
  450. [ 2.308075] hub 2-0:1.0: USB hub found
  451. [ 2.310993] hub 2-0:1.0: 1 port detected
  452. [ 2.318243] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
  453. [ 2.328269] simple-framebuffer 7f807000.framebuffer: framebuffer at 0x7f807000, 0x7e9000 bytes
  454. [ 2.331450] simple-framebuffer 7f807000.framebuffer: format=x8r8g8b8, mode=1920x1080x32, linelength=7680
  455. [ 2.341628] simple-framebuffer 7f807000.framebuffer: fb1: simplefb registered!
  456. [ 2.355760] printk: console [netcon0] enabled
  457. [ 2.355885] netconsole: network logging started
  458. [ 2.359992] ALSA device list:
  459. [ 2.362030] No soundcards found.
  460. [ 2.470931] mmc1: new HS200 MMC card at address 0001
  461. [ 2.474167] mmcblk1: mmc1:0001 58A43A 14.6 GiB
  462. [ 2.485432] mmcblk1boot0: mmc1:0001 58A43A 4.00 MiB
  463. [ 2.486224] mmcblk1boot1: mmc1:0001 58A43A 4.00 MiB
  464. [ 2.490146] mmcblk1rpmb: mmc1:0001 58A43A 4.00 MiB, chardev (242:0)
  465. [ 2.492260] EXT4-fs (mmcblk0p2): recovery complete
  466. [ 2.507206] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  467. [ 2.508980] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
  468. [ 2.523286] VFS: Mounted root (ext4 filesystem) on device 179:2.
  469. [ 2.530605] devtmpfs: mounted
  470. [ 2.536814] Freeing unused kernel memory: 2112K
  471. [ 2.541484] Run /sbin/init as init process
  472. [ 2.547063] with arguments:
  473. [ 2.550666] /sbin/init
  474. [ 2.554272] with environment:
  475. [ 2.557896] HOME=/
  476. [ 2.561458] TERM=linux
  477. [ 2.565013] MM_DEBUG=yes
  478. [ 2.688359] usb 1-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.04
  479. [ 2.694618] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  480. [ 2.702260] usb 1-1: Product: 4-Port USB 2.0 Hub
  481. [ 2.706554] usb 1-1: Manufacturer: Generic
  482. [ 2.749905] hub 1-1:1.0: USB hub found
  483. [ 2.766211] hub 1-1:1.0: 4 ports detected
  484. [ 3.107276] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
  485. [ 3.225948] usb 1-1.1: New USB device found, idVendor=0471, idProduct=0815, bcdDevice= 0.00
  486. [ 3.235105] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  487. [ 3.243221] usb 1-1.1: Product: eHome Infrared Transceiver
  488. [ 3.249504] usb 1-1.1: Manufacturer: Philips
  489. [ 3.255689] usb 1-1.1: SerialNumber: PH00G0hR
  490. [ 3.347204] usb 1-1.4: new high-speed USB device number 4 using xhci-hcd
  491. [ 3.448117] udevd[226]: starting version 3.2.7
  492. [ 3.458433] usb 1-1.4: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 1.00
  493. [ 3.466189] random: udevd: uninitialized urandom read (16 bytes read)
  494. [ 3.466451] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  495. [ 3.474812] random: udevd: uninitialized urandom read (16 bytes read)
  496. [ 3.480055] usb 1-1.4: Product: AX88179
  497. [ 3.486493] random: udevd: uninitialized urandom read (16 bytes read)
  498. [ 3.491626] usb 1-1.4: Manufacturer: ASIX Elec. Corp.
  499. [ 3.502935] usb 1-1.4: SerialNumber: 00803F5D16A041
  500. [ 3.518555] udevd[227]: starting eudev-3.2.7
  501. [ 3.921504] ax88179_178a 1-1.4:1.0 eth0: register 'ax88179_178a' at usb-xhci-hcd.2.auto-1.4, ASIX AX88179 USB 3.0
  502. Gigabit Ethernet, 80:3f:5d:09:8b:26
  503. [ 3.933994] usbcore: registered new interface driver ax88179_178a
  504. [ 3.965620] meson-vrtc ff8000a8.rtc: registered as rtc0
  505. [ 3.970394] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:03 UTC (3)
  506. [ 3.989271] panfrost ffe40000.gpu: clock rate = 24000000
  507. [ 3.993741] panfrost ffe40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
  508. [ 4.021852] panfrost ffe40000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0
  509. [ 4.028132] panfrost ffe40000.gpu: features: 00000000,3fde77ff, issues: 00000000,00000400
  510. [ 4.036481] panfrost ffe40000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
  511. [ 4.047790] panfrost ffe40000.gpu: shader_present=0x1 l2_present=0x1
  512. [ 4.055857] [drm] Initialized panfrost 1.1.0 20180908 for ffe40000.gpu on minor 1
  513. [ 4.064692] Registered IR keymap rc-rc6-mce
  514. [ 4.087621] IR RC6 protocol handler initialized
  515. [ 4.097626] Bluetooth: Core ver 2.22
  516. [ 4.098750] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  517. [ 4.102060] NET: Registered protocol family 31
  518. [ 4.112596] Bluetooth: HCI device and connection manager initialized
  519. [ 4.118238] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  520. [ 4.119082] Bluetooth: HCI socket layer initialized
  521. [ 4.130002] Bluetooth: L2CAP socket layer initialized
  522. [ 4.135030] Bluetooth: SCO socket layer initialized
  523. [ 4.164850] rc rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.2.auto/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc0
  524. [ 4.181976] rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR receiver, raw IR transmitter
  525. [ 4.190577] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.2.auto/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc0/input0
  526. [ 4.207432] Bluetooth: HCI UART driver ver 2.3
  527. [ 4.211828] Bluetooth: HCI UART protocol H4 registered
  528. [ 4.216257] Bluetooth: HCI UART protocol Three-wire (H5) registered
  529. [ 4.222744] Bluetooth: HCI UART protocol Broadcom registered
  530. [ 4.228152] Bluetooth: HCI UART protocol QCA registered
  531. [ 4.405615] random: crng init done
  532. [ 4.409930] random: 2 urandom warning(s) missed due to ratelimiting
  533. [ 4.419306] mceusb 1-1.1:1.0: long-range (0x1) receiver active
  534. [ 4.479549] mceusb 1-1.1:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
  535. [ 4.490020] mceusb 1-1.1:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
  536. [ 4.496628] usbcore: registered new interface driver mceusb
  537. [ 4.583859] Bluetooth: hci1: BCM: chip id 130
  538. [ 4.588603] Bluetooth: hci1: BCM: features 0x0f
  539. [ 4.594445] Bluetooth: hci1: BCM4345C5
  540. [ 4.599832] Bluetooth: hci1: BCM4345C5 (003.006.006) build 0000
  541. [ 4.609562] Bluetooth: hci1: BCM4345C5 'brcm/BCM4345C5.hcd' Patch
  542. [ 5.333702] Bluetooth: hci1: BCM4345C5 37.4MHz wlbga_iLNA_iTR_eLG_BT5p0 [Baseline: 0054]
  543. [ 5.340515] Bluetooth: hci1: BCM4345C5 (003.006.006) build 0054
  544. [ 6.195277] brcmfmac: F1 signature read @0x18000000=0x15294345
  545. [ 6.208983] brcmfmac: brcmf_chip_get_raminfo: RAM size is undetermined
  546. [ 6.215074] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed!
  547. [ 6.222874] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed
  548. [ 6.229368] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19...
RAW Paste Data