Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 2.6.32.9 (android@git.pc.ome.toshiba.co.jp) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Thu Sep 30 15:40:40 JST 2010
- <4>[ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c53c7f
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- <4>[ 0.000000] Machine: Tegra 2 Development System
- <4>[ 0.000000] Framebuffer tag with 65536 handle
- <4>[ 0.000000] Shmoo tag with 65537 handle
- <4>[ 0.000000] Found a warmboot tag!
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <7>[ 0.000000] On node 0 totalpages: 114688
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c0528e40, node_mem_map c0610000
- <7>[ 0.000000] DMA zone: 896 pages used for memmap
- <7>[ 0.000000] DMA zone: 0 pages reserved
- <7>[ 0.000000] DMA zone: 113792 pages, LIFO batch:31
- <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c099c000 s10528 r8192 d14048 u65536
- <6>[ 0.000000] pcpu-alloc: s10528 r8192 d14048 u65536 alloc=16*4096
- <6>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
- <5>[ 0.000000] Kernel command line: mem=448M@0M nvmem=64M@448M vmalloc=192M video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 tegraboot=sdmmc tegrapart=recovery:122000:a00:800,linux:a0e00:1000:800,loader:300:400:800,mbr:700:200:800,system:900:20000:800,cache:20900:80000:800,misc:a0900:400:800,userdata:a1f00:80000:800 boardtype=PR
- <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] Memory: 448MB = 448MB total
- <5>[ 0.000000] Memory: 448000KB available (4848K code, 1140K data, 164K init, 0K highmem)
- <6>[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- <6>[ 0.000000] Hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:416
- <4>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 6.517830] Calibrating delay loop... 1998.84 BogoMIPS (lpj=9994240)
- <4>[ 6.787831] Mount-cache hash table entries: 512
- <6>[ 6.788204] Initializing cgroup subsys cpuacct
- <6>[ 6.788224] Initializing cgroup subsys devices
- <6>[ 6.788232] Initializing cgroup subsys freezer
- <6>[ 6.788256] CPU: Testing write buffer coherency: ok
- <6>[ 6.788428] Calibrating local timer... 1.19MHz.
- <4>[ 6.897889] CPU1: Booted secondary processor
- <6>[ 7.167676] Brought up 2 CPUs
- <6>[ 7.167690] SMP: Total of 2 processors activated (3991.14 BogoMIPS).
- <7>[ 7.167711] CPU0 attaching sched-domain:
- <7>[ 7.167721] domain 0: span 0-1 level CPU
- <7>[ 7.167730] groups: 0 1
- <7>[ 7.167748] CPU1 attaching sched-domain:
- <7>[ 7.167756] domain 0: span 0-1 level CPU
- <7>[ 7.167764] groups: 1 0
- <6>[ 7.190704] regulator: core version 0.5
- <6>[ 7.191072] NET: Registered protocol family 16
- <4>[ 7.196311] Chip Id: 0x20 (Handheld SOC) Major: 0x1 Minor: 0x2 SKU: 0x8
- <4>[ 7.196940] NVRM Got shmoo boot argument (at 0xdc834004)
- <4>[ 7.196951] NVRM corner (0, 1)
- <4>[ 7.197155] NVRM CLOCKS: PLLX0: 1000000 Khz
- <4>[ 7.197165] NVRM CLOCKS: PLLM0: 666000 Khz
- <4>[ 7.197171] NVRM CLOCKS: PLLC0: 600000 Khz
- <4>[ 7.197177] NVRM CLOCKS: PLLP0: 216000 Khz
- <4>[ 7.197183] NVRM CLOCKS: PLLA0: 11289 Khz
- <4>[ 7.197189] NVRM CLOCKS: CPU: 1000000 Khz
- <4>[ 7.197194] NVRM CLOCKS: AVP: 240000 Khz
- <4>[ 7.197200] NVRM CLOCKS: System Bus: 240000 Khz
- <4>[ 7.197208] NVRM CLOCKS: Memory Controller: 333000
- <4>[ 7.197216] NVRM CLOCKS: External Memory Controller: 666000
- <6>[ 7.243372] regulator: pex_clk: 3300 mV
- <6>[ 7.243621] regulator: soc_main: 0 mV
- <6>[ 7.243872] regulator: vddio bb: 1700 <--> 2000 mV
- <6>[ 7.244143] regulator: vddio lcd: 1700 <--> 2000 mV
- <6>[ 7.244404] regulator: vddio vi: 1250 <--> 3350 mV
- <6>[ 7.244650] regulator: vddio uart: 1700 <--> 2000 mV
- <6>[ 7.244913] regulator: vddio ddr: 1700 <--> 2000 mV
- <6>[ 7.245169] regulator: vddio nand: 1250 <--> 3350 mV
- <6>[ 7.245419] regulator: vddio sys: 1700 <--> 2000 mV
- <6>[ 7.245672] regulator: vddio audio: 1700 <--> 2000 mV
- <6>[ 7.245926] regulator: vddio sd: 1250 <--> 3350 mV
- <4>[ 7.252238] ADJUSTED CLOCKS:
- <4>[ 7.252253] MC clock is set to 333000 KHz
- <4>[ 7.252263] EMC clock is set to 666000 KHz (DDR clock is at 333000 KHz)
- <4>[ 7.252272] PLLX0 clock is set to 1000000 KHz
- <4>[ 7.252277] PLLC0 clock is set to 600000 KHz
- <4>[ 7.252283] CPU clock is set to 1000000 KHz
- <4>[ 7.252289] System and AVP clock is set to 240000 KHz
- <4>[ 7.252297] GraphicsHost clock is set to 111000 KHz
- <4>[ 7.252305] 3D clock is set to 111000 KHz
- <4>[ 7.252312] 2D clock is set to 111000 KHz
- <4>[ 7.252319] Epp clock is set to 111000 KHz
- <4>[ 7.252326] Mpe clock is set to 111000 KHz
- <4>[ 7.252333] Vde clock is set to 240000 KHz
- <4>[ 7.277984] Local timer scaling factor 2097, shift 24
- <6>[ 7.278019] PL310/L2C-310 cache controller enabled
- <3>[ 7.280684] >>>>>>>>TB2 PCB Board ID 0.1 TB2_PCB_BOARD_ID = 1 <<<<<<<<<<<
- <6>[ 7.281480] No gpio is configured as buttons
- <6>[ 7.281719] tegra_setup_i2c: skipping tegra_i2c.2 (SMBUS)
- <6>[ 7.282254] /proc/sysinfo created
- <6>[ 7.282264] /proc/dmi_status created
- <6>[ 7.282272] /proc/dmi_info created
- <6>[ 7.282281] /proc/isMediaWork created
- <4>[ 7.282834] wwwwwww Tps6586xSetExternalSupply disenaging power gating
- <4>[ 7.283371] Tps6586xSetExternalSupply disengaging camera power gating
- <4>[ 7.294325] bio: create slab <bio-0> at 0
- <5>[ 7.308562] SCSI subsystem initialized
- <6>[ 7.308829] usbcore: registered new interface driver usbfs
- <6>[ 7.308936] usbcore: registered new interface driver hub
- <6>[ 7.309080] usbcore: registered new device driver usb
- <6>[ 7.310160] Bluetooth: Core ver 2.15
- <6>[ 7.310309] NET: Registered protocol family 31
- <6>[ 7.310316] Bluetooth: HCI device and connection manager initialized
- <6>[ 7.310326] Bluetooth: HCI socket layer initialized
- <6>[ 7.310541] Switching to clocksource timer_us
- <6>[ 7.331544] NET: Registered protocol family 2
- <6>[ 7.331615] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 7.331755] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- <6>[ 7.331960] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
- <6>[ 7.332174] TCP: Hash tables configured (established 16384 bind 16384)
- <6>[ 7.332183] TCP reno registered
- <6>[ 7.332310] NET: Registered protocol family 1
- <6>[ 7.332451] Unpacking initramfs...
- <6>[ 7.340701] Freeing initrd memory: 160K
- <3>[ 7.341026] tegra_cpufreq_init_once: unable to elevate DVFS daemon priority
- <4>[ 7.341534] tegra_iovmm_register: added iovmm-gart
- <6>[ 7.342929] nvrm_init called
- <4>[ 7.342976] nvrm probe
- <4>[ 7.343590]
- <4>[ 7.343593] I2C Slave is *New*
- <4>[ 7.354668] vibrator init
- <6>[ 7.361319] ashmem: initialized
- <6>[ 7.409274] alg: No test for stdrng (krng)
- <6>[ 7.409328] io scheduler noop registered
- <6>[ 7.409336] io scheduler anticipatory registered
- <6>[ 7.409344] io scheduler deadline registered
- <6>[ 7.409416] io scheduler cfq registered (default)
- <6>[ 7.411209] tegra_grhost tegra_grhost: initialized
- <4>[ 7.411667] nvtegrafb: base address: dd000000 physical: 1c01c000
- <4>[ 7.422729] Console: switching to colour frame buffer device 128x37
- <6>[ 7.442317] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- <6>[ 7.442849] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a XScale
- <6>[ 8.051086] console [ttyS0] enabled
- <6>[ 8.054917] tegra_uart.1: ttyHS1 at I/O 0x0 (irq = 69) is a unknown
- <6>[ 8.061415] Registered UART port ttyHS1
- <6>[ 8.065298] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
- <6>[ 8.071769] Registered UART port ttyHS2
- <6>[ 8.075628] tegra_uart.3: ttyHS3 at I/O 0x0 (irq = 122) is a unknown
- <6>[ 8.082182] Registered UART port ttyHS3
- <6>[ 8.086040] tegra_uart.4: ttyHS4 at I/O 0x0 (irq = 123) is a unknown
- <6>[ 8.092592] Registered UART port ttyHS4
- <6>[ 8.096522] Initialized tegra uart driver
- <6>[ 8.103327] loop: module loaded
- <3>[ 8.107086] NvRmSpiOpen() Opening channel Inst 0 and IsMaster 1
- <6>[ 8.114441] PPP generic driver version 2.4.2
- <6>[ 8.119524] PPP MPPE Compression module registered
- <6>[ 8.124310] NET: Registered protocol family 24
- <6>[ 8.128782] PPPoL2TP kernel driver, V1.0
- <6>[ 8.133096] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 8.188875] tegra-ehci tegra-ehci.1: Tegra Ehci host controller
- <6>[ 8.194984] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
- <6>[ 8.237620] tegra-ehci tegra-ehci.1: irq 53, io base 0xc5004000
- <6>[ 8.267607] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
- <6>[ 8.273568] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 8.280355] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 8.287566] usb usb1: Product: Tegra Ehci host controller
- <6>[ 8.292961] usb usb1: Manufacturer: Linux 2.6.32.9 ehci_hcd
- <6>[ 8.298530] usb usb1: SerialNumber: tegra-ehci.1
- <6>[ 8.303374] usb usb1: configuration #1 chosen from 1 choice
- <6>[ 8.309101] hub 1-0:1.0: USB hub found
- <6>[ 8.312871] hub 1-0:1.0: 1 port detected
- <6>[ 8.316875] tegra-ehci tegra-ehci.1: dmabounce: registered device
- <6>[ 8.326118] tegra-ehci tegra-ehci.2: Tegra Ehci host controller
- <6>[ 8.332211] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
- <6>[ 8.367616] tegra-ehci tegra-ehci.2: irq 129, io base 0xc5008000
- <6>[ 8.397608] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
- <6>[ 8.403555] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 8.410349] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 8.417559] usb usb2: Product: Tegra Ehci host controller
- <6>[ 8.422956] usb usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd
- <6>[ 8.428525] usb usb2: SerialNumber: tegra-ehci.2
- <6>[ 8.433382] usb usb2: configuration #1 chosen from 1 choice
- <6>[ 8.439106] hub 2-0:1.0: USB hub found
- <6>[ 8.442873] hub 2-0:1.0: 1 port detected
- <6>[ 8.446875] tegra-ehci tegra-ehci.2: dmabounce: registered device
- <6>[ 8.453087] Initializing USB Mass Storage driver...
- <6>[ 8.458110] usbcore: registered new interface driver usb-storage
- <6>[ 8.464109] USB Mass Storage support registered.
- <6>[ 8.468728] Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
- <3>[ 8.481501] tegra-udc tegra-udc.0: vbus_draw regulator error -19; charging disabled
- <6>[ 8.489252] android init
- <6>[ 8.491814] android_probe pdata: c05008d0
- <6>[ 8.495910] android_bind
- <7>[ 8.498448] android_bind_config
- <4>[ 8.498456] Gadget Android: controller 'tegra-udc' not recognized
- <6>[ 8.504537] android_usb gadget: android_usb ready
- <6>[ 8.509238] tegra-udc: bind to driver android_usb
- <6>[ 8.516564] f_adb init
- <6>[ 8.518929] android_register_function adb
- <6>[ 8.522934] f_mass_storage init
- <6>[ 8.526066] android_register_function usb_mass_storage
- <6>[ 8.531207] mass_storage_bind_config
- <6>[ 8.535042] fsg_probe pdata: c0500af8
- <6>[ 8.538975] android_usb gadget: Number of LUNs=1
- <6>[ 8.543588] adb_bind_config
- <6>[ 8.547139] mice: PS/2 mouse device common for all mice
- <6>[ 8.552697] input: gpio-keys as /devices/platform/gpio-keys.3/input/input0
- <6>[ 8.560150] input: tegra-kbc as /devices/platform/tegra-kbc/input/input1
- <6>[ 8.598751] input: nvec keyboard as /devices/virtual/input/input2
- <6>[ 8.605100] usbcore: registered new interface driver usbtouchscreen
- <6>[ 8.612659] input: nvodm_touch as /devices/virtual/input/input3
- <6>[ 8.618859] nvodm_touch: Successfully registered the ODM touch driver dcad7004
- <6>[ 8.626357] lsm303dlh accel driver: I2C Channel ID [0]
- <6>[ 8.631608] lsm303dlh accel driver: I2C Device address [12]
- <6>[ 8.637257] lsm303dlh accel driver: I2C I/O module [C]
- <6>[ 8.642574] lsm303dlh accel driver: GPIO Port INT [15]
- <6>[ 8.647796] lsm303dlh accel driver: GPIO Pin INT [7]
- <4>[ 8.653688] 1..poll_internal[100], TestVal[0x20]
- <4>[ 8.658330] 2..poll_internal[100], TestVal[0x27]
- <6>[ 8.660130] usb 1-1: new high speed USB device using tegra-ehci and address 2
- <4>[ 8.671218] Detect G-sensor calibration data!
- <4>[ 8.675567] CALIBRATION_X=0, CALIBRATION_Y=-3, CALIBRATION_Z=0
- <4>[ 8.681708] CTRL_REG1=0x0
- <4>[ 8.684321] CTRL_REG2=0x0
- <4>[ 8.686931] CTRL_REG3=0x0
- <4>[ 8.689552] CTRL_REG4=0x0
- <4>[ 8.692163] CTRL_REG5=0x0
- <4>[ 8.694774] CTRL_REG6=0x0
- <4>[ 8.697526] NvOdm Accelerometer : NvOdmGpio ConnectSemaphore success!!
- <6>[ 8.704398] input: accelerometer as /devices/virtual/input/input4
- <6>[ 8.710795] lsm303dlh_accsuccessfully registered
- <4>[ 8.715538] ### NVEC_CIR_INIT ###
- <4>[ 8.719062] ### NVEC_CIR_PROBE ###
- <6>[ 8.722746] input: nvec cir as /devices/virtual/input/input5
- <4>[ 8.728617] AKM8975 compass driver: I2C Channel ID [0]
- <4>[ 8.733832] AKM8975 compass driver: I2C Device address [18]
- <4>[ 8.739507] AKM8975 compass driver: I2C I/O module [C]
- <4>[ 8.744809] AKM8975 compass driver: GPIO Port INT [15]
- <4>[ 8.750031] AKM8975 compass driver: GPIO Pin INT [1]
- <4>[ 8.755289] AKM8975 compass driver: ID is 0x48
- <4>[ 8.759849] AKM8975 compass driver: Init Passed
- <6>[ 8.764854] input: compass as /devices/virtual/input/input6
- <6>[ 8.770866] nvodm_ecompasssuccessfully registered
- <6>[ 8.775670] usb 1-1: New USB device found, idVendor=064e, idProduct=a116
- <6>[ 8.782411] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- <6>[ 8.789548] usb 1-1: Product: USB2.0 UVC 1.3M WebCam
- <6>[ 8.794549] usb 1-1: Manufacturer: SuYin
- <6>[ 8.798467] usb 1-1: SerialNumber: CN1316-S30B-MI062-VS-R03.04.04
- <4>[ 8.801582]
- <4>[ 8.801585] Cap Sensor_Init passed
- <6>[ 8.809389] input: capsensor_tegra as /devices/virtual/input/input7
- <6>[ 8.815992] usb 1-1: configuration #1 chosen from 1 choice
- <6>[ 8.816029] nvodm_capsensorsuccessfully registered
- <6>[ 8.826334] using rtc device, tegra_rtc_odm, for alarms
- <6>[ 8.831468] tegra_rtc_odm tegra_rtc_odm: rtc core: registered tegra_rtc_odm as rtc0
- <6>[ 8.839477] i2c /dev entries driver
- <3>[ 8.843032] ERROR send_usb_hub_uevent_sock failed
- <6>[ 8.848974] Linux video capture interface: v2.00
- <6>[ 8.853845] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116)
- <6>[ 8.888750] input: USB2.0 UVC 1.3M WebCam as /devices/platform/tegra-ehci.1/usb1/1-1/1-1:1.0/input/input8
- <6>[ 8.898611] usbcore: registered new interface driver uvcvideo
- <6>[ 8.904351] USB Video Class driver (v0.1.0)
- <6>[ 8.960116] usb 2-1: new high speed USB device using tegra-ehci and address 2
- <6>[ 8.968819] device-mapper: uevent: version 1.0.3
- <6>[ 8.973878] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- <6>[ 8.982360] Bluetooth: HCI UART driver ver 2.2
- <6>[ 8.986802] Bluetooth: HCI H4 protocol initialized
- <6>[ 8.991598] Bluetooth: HCI BCSP protocol initialized
- <6>[ 8.996557] Bluetooth: HCILL protocol initialized
- <6>[ 9.001599] cpuidle: using governor ladder
- <6>[ 9.006288] cpuidle: using governor menu
- <6>[ 9.010388] sdhci: Secure Digital Host Controller Interface driver
- <6>[ 9.016585] sdhci: Copyright(c) Pierre Ossman
- <6>[ 9.020969] usb 2-1: New USB device found, idVendor=058f, idProduct=6254
- <6>[ 9.021680] tegra-sdhci tegra-sdhci.3: no max_clk specified, default to 52MHz
- <4>[ 9.021710] mmc0: Invalid maximum block size, assuming 512 bytes
- <6>[ 9.021877] mmc0: SDHCI controller on tegra-sdhci.3 [tegra-sdhci.3] using ADMA
- <6>[ 9.021885] tegra-sdhci tegra-sdhci.3: probe complete
- <6>[ 9.022497] tegra-sdhci tegra-sdhci.1: no max_clk specified, default to 52MHz
- <4>[ 9.023120] mmc1: Invalid maximum block size, assuming 512 bytes
- <6>[ 9.023268] mmc1: SDHCI controller on tegra-sdhci.1 [tegra-sdhci.1] using ADMA
- <6>[ 9.023277] tegra-sdhci tegra-sdhci.1: probe complete
- <4>[ 9.024544] *** SdioOdmWlanSetPowerOn: 1st
- <6>[ 9.026574] tegra-sdhci tegra-sdhci.0: no max_clk specified, default to 52MHz
- <4>[ 9.026599] mmc2: Invalid maximum block size, assuming 512 bytes
- <6>[ 9.026758] mmc2: SDHCI controller on tegra-sdhci.0 [tegra-sdhci.0] using ADMA
- <6>[ 9.026766] tegra-sdhci tegra-sdhci.0: probe complete
- <6>[ 9.027447] usbcore: registered new interface driver usbhid
- <6>[ 9.027458] usbhid: v2.6:USB HID core driver
- <6>[ 9.027912] logger: created 64K log 'log_main'
- <6>[ 9.028075] logger: created 256K log 'log_events'
- <6>[ 9.028229] logger: created 64K log 'log_radio'
- <6>[ 9.028382] logger: created 64K log 'log_system'
- <6>[ 9.028561] TCP cubic registered
- <6>[ 9.028569] NET: Registered protocol family 17
- <6>[ 9.028599] Bluetooth: L2CAP ver 2.14
- <6>[ 9.028603] Bluetooth: L2CAP socket layer initialized
- <6>[ 9.028613] Bluetooth: SCO (Voice Link) ver 0.6
- <6>[ 9.028618] Bluetooth: SCO socket layer initialized
- <6>[ 9.028698] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 9.028707] Bluetooth: RFCOMM socket layer initialized
- <6>[ 9.028713] Bluetooth: RFCOMM ver 1.11
- <6>[ 9.028718] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 9.028724] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 9.028879] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
- <6>[ 9.189321] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- <6>[ 9.189576] usb 2-1: configuration #1 chosen from 1 choice
- <6>[ 9.206914] hub 2-1:1.0: USB hub found
- <4>[ 9.208596] regulator_init_complete: incomplete constraints, leaving vddio sys on
- <4>[ 9.208605] regulator_init_complete: incomplete constraints, leaving vddio ddr on
- <4>[ 9.208616] regulator_init_complete: incomplete constraints, leaving soc_main on
- <4>[ 9.208624] regulator_init_complete: incomplete constraints, leaving pex_clk on
- <6>[ 9.211720] android_usb gadget: high speed config #1: android
- <6>[ 9.245979] tegra_rtc_odm tegra_rtc_odm: setting system clock to 2010-11-04 17:26:25 UTC (1288891585)
- <6>[ 9.255218] hub 2-1:1.0: 4 ports detected
- <6>[ 9.352519] mmc0: new high speed MMC card at address 0001
- <6>[ 9.358234] mmcblk0: mmc0:0001 SEM16G 14.8 GiB
- <6>[ 9.362935] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 >
- <6>[ 9.396904] Freeing init memory: 164K
- <6>[ 9.635080] mmc1: new high speed SD card at address b368
- <6>[ 9.640731] mmcblk1: mmc1:b368 SD 477 MiB
- <6>[ 9.645200] mmcblk1: p1
- <4>[ 9.716107] *** sdio_read_common_cis: +
- <7>[ 9.729878] mmc2: queuing CIS tuple 0x01 length 3
- <4>[ 9.739280] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
- <7>[ 9.765257] mmc2: queuing CIS tuple 0x1a length 5
- <7>[ 9.777567] mmc2: queuing CIS tuple 0x1b length 8
- <7>[ 9.780050] mmc2: queuing CIS tuple 0x14 length 0
- <4>[ 9.781286] *** sdio_read_common_cis: Atheros case
- <4>[ 9.786155] *** sdio_read_common_cis: disable MMC_CAP_NEEDS_POLL
- <4>[ 9.792250] *** sdio_read_common_cis: caps=[0x8f], MMC_CAP_NEEDS_POLL=[0x20], skip_detect=[0x1]
- <4>[ 9.801028] *** sdio_read_common_cis: -
- <7>[ 9.808355] mmc2: queuing CIS tuple 0x80 length 1
- <7>[ 9.808408] mmc2: queuing CIS tuple 0x81 length 1
- <7>[ 9.808458] mmc2: queuing CIS tuple 0x82 length 1
- <6>[ 9.808486] mmc2: new high speed SDIO card at address 0001
- <4>[ 11.304154] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- <6>[ 11.310147] kjournald starting. Commit interval 5 seconds
- <6>[ 11.325779] EXT3 FS on mmcblk0p6, internal journal
- <6>[ 11.330697] EXT3-fs: recovery complete.
- <6>[ 11.335646] EXT3-fs: mounted filesystem with writeback data mode.
- <4>[ 11.361114] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- <6>[ 11.369134] kjournald starting. Commit interval 5 seconds
- <6>[ 11.375770] EXT3 FS on mmcblk0p2, internal journal
- <6>[ 11.380588] EXT3-fs: recovery complete.
- <6>[ 11.385195] EXT3-fs: mounted filesystem with writeback data mode.
- <6>[ 11.403732] kjournald starting. Commit interval 5 seconds
- <4>[ 11.403741] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- <6>[ 11.417753] EXT3 FS on mmcblk0p3, internal journal
- <6>[ 11.422555] EXT3-fs: recovery complete.
- <6>[ 11.427133] EXT3-fs: mounted filesystem with writeback data mode.
- <3>[ 11.455436] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- <3>[ 11.467981] init: queuing device-added-/dev/akm8975_dev
- <3>[ 11.473227] init: property name too long in trigger property:persist.service.adb.enable_NV_DISABLED=1NvRmIoctls_NvRmFbControl: deprecated
- <6>[ 12.081012] warning: `adbd' uses 32-bit capabilities (legacy support in use)
- <6>[ 12.088120] enabling adb
- <6>[ 12.111739] adb_open
- <6>[ 12.131062] adb_open
- <6>[ 12.284304] adb_release
- <3>[ 12.287117] init: sys_prop: permission denied uid:2000 name:adb.connected
- <6>[ 12.294454] adb_open
- <6>[ 12.659154] android_usb gadget: high speed config #1: android
- <6>[ 13.133522] adb_open
- <6>[ 13.303165] nvrm_notifier_store: nvrm_daemon=923
- <6>[ 13.309027] nvrm_notifier_show: blocking
- <3>[ 13.607307] init: sys_prop: permission denied uid:2000 name:adb.connected
- <1>[ 14.086728] AR6000: Unsupported configuration opcode: 3
- <1>[ 14.093366] AR6000: Unsupported configuration opcode: 3
- <1>[ 14.099205] HIF Interrupt processing is SYNC ONLY
- <1>[ 14.103976] AR6000: Unsupported configuration opcode: 7
- <1>[ 14.109229] AR6000: Unsupported configuration opcode: 5
- <1>[ 14.114660] GMBOX Advertised: Address:0x7000 , size:16384
- <1>[ 14.121202] In aggr_init..
- <1>[ 14.124216] going out of aggr_init..status OK
- <1>[ 14.129815] AR6K: Temporary WAR to avoid SDIO CRC error
- <6>[ 14.135859] adb_open
- <4>[ 14.143747] MAC from EEPROM 00:24:7E:00:12:3E
- <1>[ 14.148318] android_readwrite_file: file /system/wifi/softmac filp_open error
- <4>[ 14.156045] MAC from random generated 00:03:7F:91:CA:72
- <1>[ 14.464107] BDADDR 0x0:0x24:0x7e:0x20:0x8b:0xa2
- <1>[ 14.468834] ar6000_init() Got WMI @ 0xdb2ec600.
- <1>[ 14.483542] Target Ready: credits: 30 credit size: 1664
- <1>[ 14.488899] AR6K: ** HIF layer does not support scatter requests (17)
- <1>[ 14.495492] AR6K: virtual scatter transfers enabled (max scatter items:16: maxlen:16384)
- <1>[ 14.503759] AR6K: max recv: 16384 max send: 12288
- <1>[ 14.509515] HCI Bridge: running in normal mode...
- <1>[ 14.514414] HCI: notifying attached client to transport...
- <1>[ 14.520103] HCI ready (hci:0xDBBA7A80, headroom:1, tailroom:0 blockpad:128)
- <1>[ 14.527430] HCI : InitTxCreditState - credits avail: 10, size: 256
- <1>[ 14.650593] AR3K Config: Baud Changed to 3000000
- <1>[ 14.984208] AR3K Config: Baud changed to 3000000 for AR6K
- <1>[ 15.022902] PS Event fc 0 1e
- <1>[ 15.025871] deadc0de: FPGA/ASIC PS File Name ar3k/30101coex/PS_ASIC.pst
- <6>[ 15.138183] adb_open
- <1>[ 15.159782] File Open Operation Successful
- <1>[ 15.164855] TAG ID 23
- <1>[ 15.167367] TAG Length 34 Tag Index 0
- <1>[ 15.172968] TAG ID 300
- <1>[ 15.175930] TAG Length 66 Tag Index 1
- <1>[ 15.180116] TAG ID 19
- <1>[ 15.182767] TAG Length 182 Tag Index 2
- <1>[ 15.187143] TAG ID 1
- <1>[ 15.189588] TAG Length 6 Tag Index 3
- <1>[ 15.193420] TAG ID 2
- <1>[ 15.195773] TAG Length 4 Tag Index 4
- <1>[ 15.199799] TAG ID 3
- <1>[ 15.202221] TAG Length 4 Tag Index 5
- <1>[ 15.206091] TAG ID 21
- <1>[ 15.208551] TAG Length 4 Tag Index 6
- <1>[ 15.212947] TAG ID 22
- <1>[ 15.215428] TAG Length 4 Tag Index 7
- <1>[ 15.219322] TAG ID 31
- <1>[ 15.221977] TAG Length 8 Tag Index 8
- <1>[ 15.225922] TAG ID 61
- <1>[ 15.228396] TAG Length 24 Tag Index 9
- <1>[ 15.232354] TAG ID 38
- <1>[ 15.234798] TAG Length 12 Tag Index 10
- <1>[ 15.238967] Number of Tags 11
- <1>[ 15.241988] BD ADDR is present in Patch File
- <1>[ 15.246774] BD ADDR is not present adding 10 extra bytes
- <1>[ 15.252341] ** Total Length 412
- <1>[ 15.255483] Patch File Name ar3k/30101coex/RamPatch.txt
- <1>[ 15.275801] Index [0]
- <1>[ 15.278193] Index [1]
- <1>[ 15.280584] Index [2]
- <1>[ 15.283003] Index [3]
- <1>[ 15.285462] Index [4]
- <1>[ 15.288415] Index [5]
- <1>[ 15.290917] Index [6]
- <1>[ 15.293344] Index [7]
- <1>[ 15.295774] Index [8]
- <1>[ 15.298243] Index [9]
- <1>[ 15.300688] Index [10]
- <1>[ 15.304114] Index [11]
- <3>[ 15.304625] init: untracked pid 956 exited
- <1>[ 15.311011] Index [12]
- <1>[ 15.313473] Index [13]
- <1>[ 15.315938] Index [14]
- <1>[ 15.318552] Index [15]
- <1>[ 15.321031] Index [16]
- <1>[ 15.323493] Index [17]
- <1>[ 15.325998] Index [18]
- <1>[ 15.328476] Index [19]
- <1>[ 15.330970] Index [20]
- <1>[ 15.333526] Index [21]
- <1>[ 15.336033] Index [22]
- <1>[ 15.338546] Index [23]
- <1>[ 15.341133] Index [24]
- <1>[ 15.343615] Index [25]
- <1>[ 15.346076] Index [26]
- <1>[ 15.348555] Index [27]
- <1>[ 15.351078] Index [28]
- <1>[ 15.353543] Index [29]
- <1>[ 15.356018] Index [30]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement