Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 865.865] Blank CRTC 0 success
- [ 865.865] Disable CRTC memreq 0 success
- [ 865.865] Disable CRTC 0 success
- [ 865.865] Set CRTC 0 Source success
- [ 865.865] Mode 1366x768 - 1510 789 10
- [ 865.865] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- [ 865.865] (II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
- [ 865.865] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
- [ 865.885] Picked PLL 0
- [ 865.885] before 7150
- [ 865.885] after 7150
- [ 865.885] best_freq: 71600
- [ 865.885] best_feedback_div: 160
- [ 865.885] best_frac_feedback_div: 0
- [ 865.885] best_ref_div: 2
- [ 865.885] best_post_div: 16
- [ 865.885] (II) RADEON(0): crtc(0) Clock: mode 71500, PLL 716000
- [ 865.885] (II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0xA0(160), fracfbdiv 0, pdiv 16
- [ 865.935] Set CRTC 0 PLL success
- [ 865.935] Set CRTC Timing success
- [ 865.935] Set CRTC 0 Overscan success
- [ 865.935] Not using RMX
- [ 865.935] scaler 0 setup success
- [ 865.935] Set CRTC 0 Source success
- [ 865.935] crtc 0 YUV disable setup success
- [ 865.945] Output DIG0 transmitter setup success
- [ 865.945] Output DIG1 encoder setup success
- [ 865.945] Output DIG1 encoder setup success
- [ 865.945] Output DIG0 transmitter setup success
- [ 865.955] Output DIG0 transmitter setup success
- [ 865.965] Output DIG0 transmitter setup success
- [ 865.975] Output DIG0 transmitter setup success
- [ 865.975] Enable CRTC 0 success
- [ 865.975] Enable CRTC memreq 0 success
- [ 865.975] Unblank CRTC 0 success
- [ 865.975] Output CRT1 disable success
- [ 865.975] Output DIG0 transmitter setup success
- [ 865.975] Blank CRTC 1 success
- [ 865.975] Disable CRTC memreq 1 success
- [ 865.975] Disable CRTC 1 success
- [ 865.976] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disab led message.
- [ 865.976] (--) RandR disabled
- [ 865.976] (II) Initializing built-in extension Generic Event Extension
- [ 865.976] (II) Initializing built-in extension SHAPE
- [ 865.976] (II) Initializing built-in extension MIT-SHM
- [ 865.976] (II) Initializing built-in extension XInputExtension
- [ 865.976] (II) Initializing built-in extension XTEST
- [ 865.976] (II) Initializing built-in extension BIG-REQUESTS
- [ 865.976] (II) Initializing built-in extension SYNC
- [ 865.976] (II) Initializing built-in extension XKEYBOARD
- [ 865.976] (II) Initializing built-in extension XC-MISC
- [ 865.976] (II) Initializing built-in extension XINERAMA
- [ 865.976] (II) Initializing built-in extension XFIXES
- [ 865.976] (II) Initializing built-in extension RENDER
- [ 865.976] (II) Initializing built-in extension RANDR
- [ 865.976] (II) Initializing built-in extension COMPOSITE
- [ 865.976] (II) Initializing built-in extension DAMAGE
- [ 865.986] (II) AIGLX: Screen 0 is not DRI2 capable
- [ 865.986] (II) AIGLX: Screen 0 is not DRI capable
- [ 865.991] (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so
- [ 865.991] (II) GLX: Initialized DRISWRAST GL provider for screen 0
- [ 865.992] (II) RADEON(0): Setting screen physical size to 361 x 203
- [ 866.085] (II) config/udev: Adding input device Power Button (/dev/input/even t5)
- [ 866.086] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 866.086] (II) LoadModule: "evdev"
- [ 866.086] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
- [ 866.086] (II) Module evdev: vendor="X.Org Foundation"
- [ 866.086] compiled for 1.9.2, module version = 2.5.0
- [ 866.086] Module class: X.Org XInput Driver
- [ 866.086] ABI class: X.Org XInput driver, version 11.0
- [ 866.086] (**) Power Button: always reports core events
- [ 866.086] (**) Power Button: Device: "/dev/input/event5"
- [ 866.115] (--) Power Button: Found keys
- [ 866.115] (II) Power Button: Configuring as keyboard
- [ 866.115] (II) XINPUT: Adding extended input device "Power Button" (type: KEY BOARD)
- [ 866.115] (**) Option "xkb_rules" "evdev"
- [ 866.115] (**) Option "xkb_model" "evdev"
- [ 866.115] (**) Option "xkb_layout" "us"
- [ 866.186] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
- [ 866.187] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
- [ 866.187] (**) Video Bus: always reports core events
- [ 866.187] (**) Video Bus: Device: "/dev/input/event6"
- [ 866.215] (--) Video Bus: Found keys
- [ 866.215] (II) Video Bus: Configuring as keyboard
- [ 866.215] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOA RD)
- [ 866.215] (**) Option "xkb_rules" "evdev"
- [ 866.215] (**) Option "xkb_model" "evdev"
- [ 866.215] (**) Option "xkb_layout" "us"
- [ 866.330] (II) config/udev: Adding input device Power Button (/dev/input/even t3)
- [ 866.330] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 866.330] (**) Power Button: always reports core events
- [ 866.330] (**) Power Button: Device: "/dev/input/event3"
- [ 866.375] (--) Power Button: Found keys
- [ 866.375] (II) Power Button: Configuring as keyboard
- [ 866.375] (II) XINPUT: Adding extended input device "Power Button" (type: KEY BOARD)
- [ 866.375] (**) Option "xkb_rules" "evdev"
- [ 866.375] (**) Option "xkb_model" "evdev"
- [ 866.375] (**) Option "xkb_layout" "us"
- [ 866.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event4 )
- [ 866.376] (II) No input driver/identifier specified (ignoring)
- [ 866.383] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
- [ 866.384] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keybo ard catchall"
- [ 866.384] (**) AT Translated Set 2 keyboard: always reports core events
- [ 866.384] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
- [ 866.425] (--) AT Translated Set 2 keyboard: Found keys
- [ 866.425] (II) AT Translated Set 2 keyboard: Configuring as keyboard
- [ 866.425] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyb oard" (type: KEYBOARD)
- [ 866.425] (**) Option "xkb_rules" "evdev"
- [ 866.425] (**) Option "xkb_model" "evdev"
- [ 866.425] (**) Option "xkb_layout" "us"
- [ 866.426] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/ dev/input/event1)
- [ 866.426] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpa d catchall"
- [ 866.426] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catc hall"
- [ 866.426] (II) LoadModule: "synaptics"
- [ 866.426] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
- [ 866.427] (II) Module synaptics: vendor="X.Org Foundation"
- [ 866.427] compiled for 1.9.2, module version = 1.3.0
- [ 866.427] Module class: X.Org XInput Driver
- [ 866.427] ABI class: X.Org XInput driver, version 11.0
- [ 866.427] (II) Synaptics touchpad driver version 1.3.0
- [ 866.427] (**) Option "Device" "/dev/input/event1"
- [ 866.545] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
- [ 866.545] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5036
- [ 866.545] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
- [ 866.545] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
- [ 866.545] (--) SynPS/2 Synaptics TouchPad: buttons: left right
- [ 866.625] (--) SynPS/2 Synaptics TouchPad: touchpad found
- [ 866.625] (**) SynPS/2 Synaptics TouchPad: always reports core events
- [ 866.665] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchP ad" (type: TOUCHPAD)
- [ 866.665] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant d eceleration 2.5
- [ 866.665] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
- [ 866.665] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
- [ 866.665] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration schem e 1
- [ 866.665] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
- [ 866.665] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
- [ 866.665] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
- [ 866.745] (--) SynPS/2 Synaptics TouchPad: touchpad found
- [ 866.745] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/ dev/input/mouse0)
- [ 866.745] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catc hall"
- [ 866.745] (II) Synaptics touchpad driver version 1.3.0
- [ 867.705] (EE) SynPS/2 Synaptics TouchPad no synaptics event device found
- [ 867.705] (**) Option "Device" "/dev/input/mouse0"
- [ 867.745] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range. defaulting to 1615 - 5685
- [ 867.745] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range. defaulting to 1729 - 4171
- [ 867.745] (--) SynPS/2 Synaptics TouchPad: invalid pressure range. defaultin g to 0 - 256
- [ 867.745] (--) SynPS/2 Synaptics TouchPad: invalid finger width range. defau lting to 0 - 16
- [ 867.775] (EE) Query no Synaptics: 6003C8
- [ 867.775] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
- [ 867.775] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptic s hardware.
- [ 867.815] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
- [ 867.815] (II) UnloadModule: "synaptics"
- [ 867.815] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/i nput/event2)
- [ 867.815] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catc hall"
- [ 867.815] (**) TPPS/2 IBM TrackPoint: always reports core events
- [ 867.816] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event2"
- [ 867.855] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
- [ 867.855] (--) TPPS/2 IBM TrackPoint: Found relative axes
- [ 867.855] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
- [ 867.855] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
- [ 867.855] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
- [ 867.855] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelIner tia: 10, EmulateWheelTimeout: 200
- [ 867.855] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" ( type: MOUSE)
- [ 867.855] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
- [ 867.855] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
- [ 867.855] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
- [ 867.855] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
- [ 867.855] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
- [ 867.856] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/i nput/mouse1)
- [ 867.856] (II) No input driver/identifier specified (ignoring)
- [ 867.975] (II) Power Button: Close
- [ 867.975] (II) UnloadModule: "evdev"
- [ 868.035] (II) Video Bus: Close
- [ 868.035] (II) UnloadModule: "evdev"
- [ 868.095] (II) Power Button: Close
- [ 868.095] (II) UnloadModule: "evdev"
- [ 868.155] (II) AT Translated Set 2 keyboard: Close
- [ 868.155] (II) UnloadModule: "evdev"
- [ 868.255] (II) UnloadModule: "synaptics"
- [ 868.315] (II) TPPS/2 IBM TrackPoint: Close
- [ 868.315] (II) UnloadModule: "evdev"
- [ 869.225] Output DIG0 transmitter setup success
- [ 869.237] Blank CRTC 0 success
- [ 869.237] Disable CRTC memreq 0 success
- [ 869.245] Disable CRTC 0 success
- [ 869.245] Blank CRTC 1 success
- [ 869.245] Disable CRTC memreq 1 success
- [ 869.245] Disable CRTC 1 success
- [ 869.245] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
- [ 869.245] (II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
- [ 869.245] (II) RADEON(0): MC_AGP_LOCATION : 0x00000000
- [ 869.265] (II) RADEON(0): avivo_restore !
- [ 869.285] Enable CRTC 0 success
- [ 869.285] Enable CRTC memreq 0 success
- [ 869.298] Unblank CRTC 0 success
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement