API tools faq
paste
Advertisement
milomak

failing htpc hard drive

milomak
Oct 6th, 2022
251
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.59 KB | None | 0 0
raw download clone embed print report
  1. # smartctl -a /dev/sdb
  2. smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-18-amd64] (local build)
  3. Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Scorpio Blue Serial ATA (AF)
  7. Device Model: WDC WD7500BPVT-35HXZT3
  8. Serial Number: WD-WXQ1EB1FWMCN
  9. LU WWN Device Id: 5 0014ee 6583062ef
  10. Firmware Version: 01.01A01
  11. User Capacity: 750,156,374,016 bytes [750 GB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 5400 rpm
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ATA8-ACS (minor revision not indicated)
  16. SATA Version is: SATA 2.6, 3.0 Gb/s
  17. Local Time is: Thu Sep 22 17:37:40 2022 UTC
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: FAILED!
  23. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  24. See vendor-specific Attribute list for failed Attributes.
  25.  
  26. General SMART Values:
  27. Offline data collection status: (0x00) Offline data collection activity
  28. was never started.
  29. Auto Offline Data Collection: Disabled.
  30. Self-test execution status: ( 73) The previous self-test completed having
  31. a test element that failed and the test
  32. element that failed is not known.
  33. Total time to complete Offline
  34. data collection: (15480) seconds.
  35. Offline data collection
  36. capabilities: (0x7b) SMART execute Offline immediate.
  37. Auto Offline data collection on/off support.
  38. Suspend Offline collection upon new
  39. command.
  40. Offline surface scan supported.
  41. Self-test supported.
  42. Conveyance Self-test supported.
  43. Selective Self-test supported.
  44. SMART capabilities: (0x0003) Saves SMART data before entering
  45. power-saving mode.
  46. Supports SMART auto save timer.
  47. Error logging capability: (0x01) Error logging supported.
  48. General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time: ( 2) minutes.
  51. Extended self-test routine
  52. recommended polling time: ( 152) minutes.
  53. Conveyance self-test routine
  54. recommended polling time: ( 5) minutes.
  55. SCT capabilities: (0x7035) SCT Status supported.
  56. SCT Feature Control supported.
  57. SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 16
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  62. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1617
  63. 3 Spin_Up_Time 0x0027 177 172 021 Pre-fail Always - 2150
  64. 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3766
  65. 5 Reallocated_Sector_Ct 0x0033 133 133 140 Pre-fail Always FAILING_NOW 561
  66. 7 Seek_Error_Rate 0x002e 200 198 000 Old_age Always - 0
  67. 9 Power_On_Hours 0x0032 023 023 000 Old_age Always - 56635
  68. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  69. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  70. 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3727
  71. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 489
  72. 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 12999347
  73. 194 Temperature_Celsius 0x0022 116 081 000 Old_age Always - 31
  74. 196 Reallocated_Event_Count 0x0032 192 192 000 Old_age Always - 8
  75. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 29
  76. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  77. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  78. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  79.  
  80. SMART Error Log Version: 1
  81. Warning: ATA error count 35241 inconsistent with error log pointer 4
  82.  
  83. ATA Error Count: 35241 (device log contains only the most recent five errors)
  84. CR = Command Register [HEX]
  85. FR = Features Register [HEX]
  86. SC = Sector Count Register [HEX]
  87. SN = Sector Number Register [HEX]
  88. CL = Cylinder Low Register [HEX]
  89. CH = Cylinder High Register [HEX]
  90. DH = Device/Head Register [HEX]
  91. DC = Device Command Register [HEX]
  92. ER = Error register [HEX]
  93. ST = Status register [HEX]
  94. Powered_Up_Time is measured from power on, and printed as
  95. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  96. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  97.  
  98. Error 35241 occurred at disk power-on lifetime: 56625 hours (2359 days + 9 hours)
  99. When the command that caused the error occurred, the device was active or idle.
  100.  
  101. After command completion occurred, registers were:
  102. ER ST SC SN CL CH DH
  103. -- -- -- -- -- -- --
  104. 04 61 02 00 00 00 a0 Device Fault; Error: ABRT
  105.  
  106. Commands leading to the command that caused the error were:
  107. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  108. -- -- -- -- -- -- -- -- ---------------- --------------------
  109. ef 10 02 00 00 00 a0 08 2d+07:39:00.411 SET FEATURES [Enable SATA feature]
  110. ec 00 00 00 00 00 a0 08 2d+07:39:00.405 IDENTIFY DEVICE
  111. ef 03 46 00 00 00 a0 08 2d+07:39:00.405 SET FEATURES [Set transfer mode]
  112. ef 10 02 00 00 00 a0 08 2d+07:39:00.405 SET FEATURES [Enable SATA feature]
  113. ec 00 00 00 00 00 a0 08 2d+07:39:00.399 IDENTIFY DEVICE
  114.  
  115. Error 35240 occurred at disk power-on lifetime: 56625 hours (2359 days + 9 hours)
  116. When the command that caused the error occurred, the device was active or idle.
  117.  
  118. After command completion occurred, registers were:
  119. ER ST SC SN CL CH DH
  120. -- -- -- -- -- -- --
  121. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  122.  
  123. Commands leading to the command that caused the error were:
  124. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  125. -- -- -- -- -- -- -- -- ---------------- --------------------
  126. ef 03 46 00 00 00 a0 08 2d+07:39:00.405 SET FEATURES [Set transfer mode]
  127. ef 10 02 00 00 00 a0 08 2d+07:39:00.405 SET FEATURES [Enable SATA feature]
  128. ec 00 00 00 00 00 a0 08 2d+07:39:00.399 IDENTIFY DEVICE
  129. c8 00 08 00 8a 82 e5 08 2d+07:39:00.393 READ DMA
  130. ef 10 02 00 00 00 a0 08 2d+07:39:00.393 SET FEATURES [Enable SATA feature]
  131.  
  132. Error 35239 occurred at disk power-on lifetime: 56625 hours (2359 days + 9 hours)
  133. When the command that caused the error occurred, the device was active or idle.
  134.  
  135. After command completion occurred, registers were:
  136. ER ST SC SN CL CH DH
  137. -- -- -- -- -- -- --
  138. 04 61 02 00 00 00 a0 Device Fault; Error: ABRT
  139.  
  140. Commands leading to the command that caused the error were:
  141. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  142. -- -- -- -- -- -- -- -- ---------------- --------------------
  143. ef 10 02 00 00 00 a0 08 2d+07:39:00.405 SET FEATURES [Enable SATA feature]
  144. ec 00 00 00 00 00 a0 08 2d+07:39:00.399 IDENTIFY DEVICE
  145. c8 00 08 00 8a 82 e5 08 2d+07:39:00.393 READ DMA
  146. ef 10 02 00 00 00 a0 08 2d+07:39:00.393 SET FEATURES [Enable SATA feature]
  147. ec 00 00 00 00 00 a0 08 2d+07:39:00.387 IDENTIFY DEVICE
  148.  
  149. Error 35238 occurred at disk power-on lifetime: 56625 hours (2359 days + 9 hours)
  150. When the command that caused the error occurred, the device was active or idle.
  151.  
  152. After command completion occurred, registers were:
  153. ER ST SC SN CL CH DH
  154. -- -- -- -- -- -- --
  155. 04 61 08 00 8a 82 e5 Device Fault; Error: ABRT 8 sectors at LBA = 0x05828a00 = 92441088
  156.  
  157. Commands leading to the command that caused the error were:
  158. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  159. -- -- -- -- -- -- -- -- ---------------- --------------------
  160. c8 00 08 00 8a 82 e5 08 2d+07:39:00.393 READ DMA
  161. ef 10 02 00 00 00 a0 08 2d+07:39:00.393 SET FEATURES [Enable SATA feature]
  162. ec 00 00 00 00 00 a0 08 2d+07:39:00.387 IDENTIFY DEVICE
  163. ef 03 46 00 00 00 a0 08 2d+07:39:00.387 SET FEATURES [Set transfer mode]
  164. ef 10 02 00 00 00 a0 08 2d+07:39:00.387 SET FEATURES [Enable SATA feature]
  165.  
  166. Error 35237 occurred at disk power-on lifetime: 56625 hours (2359 days + 9 hours)
  167. When the command that caused the error occurred, the device was active or idle.
  168.  
  169. After command completion occurred, registers were:
  170. ER ST SC SN CL CH DH
  171. -- -- -- -- -- -- --
  172. 04 61 02 00 00 00 a0 Device Fault; Error: ABRT
  173.  
  174. Commands leading to the command that caused the error were:
  175. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  176. -- -- -- -- -- -- -- -- ---------------- --------------------
  177. ef 10 02 00 00 00 a0 08 2d+07:39:00.393 SET FEATURES [Enable SATA feature]
  178. ec 00 00 00 00 00 a0 08 2d+07:39:00.387 IDENTIFY DEVICE
  179. ef 03 46 00 00 00 a0 08 2d+07:39:00.387 SET FEATURES [Set transfer mode]
  180. ef 10 02 00 00 00 a0 08 2d+07:39:00.387 SET FEATURES [Enable SATA feature]
  181. ec 00 00 00 00 00 a0 08 2d+07:39:00.381 IDENTIFY DEVICE
  182.  
  183. SMART Self-test log structure revision number 1
  184. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  185. # 1 Extended offline Completed: unknown failure 90% 56631 -
  186. # 2 Short offline Completed: unknown failure 90% 56627 -
  187. # 3 Extended offline Completed: unknown failure 90% 56627 -
  188.  
  189. SMART Selective self-test log data structure revision number 1
  190. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  191. 1 0 0 Not_testing
  192. 2 0 0 Not_testing
  193. 3 0 0 Not_testing
  194. 4 0 0 Not_testing
  195. 5 0 0 Not_testing
  196. Selective self-test flags (0x0):
  197. After scanning selected spans, do NOT read-scan remainder of disk.
  198. If Selective self-test is pending on power-up, resume after 0 minute delay.
  199.  
Tags: failing hard drive
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!