API tools faq
paste
Advertisement
Guest User

Smart log

a guest
Mar 13th, 2020
222
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.84 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-11-amd64] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.14 (AF)
  6. Device Model: ST3000DM001-9YN166
  7. Serial Number: ******
  8. LU WWN Device Id: *************
  9. Firmware Version: ****
  10. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 7200 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA8-ACS T13/1699-D revision 4
  15. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is: Fri Mar 13 11:32:24 2020 -03
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 584) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 338) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 2) minutes.
  52. SCT capabilities: (0x3085) SCT Status supported.
  53.  
  54. SMART Attributes Data Structure revision number: 10
  55. Vendor Specific SMART Attributes with Thresholds:
  56. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  57. 1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 189116904
  58. 3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0
  59. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 28
  60. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  61. 7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 60293591463
  62. 9 Power_On_Hours 0x0032 034 034 000 Old_age Always - 58487
  63. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  64. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 28
  65. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  66. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  67. 187 Reported_Uncorrect 0x0032 062 062 000 Old_age Always - 38
  68. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 1 1 1
  69. 189 High_Fly_Writes 0x003a 083 083 000 Old_age Always - 17
  70. 190 Airflow_Temperature_Cel 0x0022 071 066 045 Old_age Always - 29 (Min/Max 21/32)
  71. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  72. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14
  73. 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 561175
  74. 194 Temperature_Celsius 0x0022 029 040 000 Old_age Always - 29 (0 17 0 0 0)
  75. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8
  76. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8
  77. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  78. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 44214h+24m+23.917s
  79. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 227187538971847
  80. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 164535056371098
  81.  
  82. SMART Error Log Version: 1
  83. ATA Error Count: 38 (device log contains only the most recent five errors)
  84. CR = Command Register [HEX]
  85. FR = Features Register [HEX]
  86. SC = Sector Count Register [HEX]
  87. SN = Sector Number Register [HEX]
  88. CL = Cylinder Low Register [HEX]
  89. CH = Cylinder High Register [HEX]
  90. DH = Device/Head Register [HEX]
  91. DC = Device Command Register [HEX]
  92. ER = Error register [HEX]
  93. ST = Status register [HEX]
  94. Powered_Up_Time is measured from power on, and printed as
  95. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  96. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  97.  
  98. Error 38 occurred at disk power-on lifetime: 57417 hours (2392 days + 9 hours)
  99. When the command that caused the error occurred, the device was active or idle.
  100.  
  101. After command completion occurred, registers were:
  102. ER ST SC SN CL CH DH
  103. -- -- -- -- -- -- --
  104. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  105.  
  106. Commands leading to the command that caused the error were:
  107. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  108. -- -- -- -- -- -- -- -- ---------------- --------------------
  109. 60 00 08 ff ff ff 4f 00 21d+11:15:27.645 READ FPDMA QUEUED
  110. 61 00 50 ff ff ff 4f 00 21d+11:15:27.644 WRITE FPDMA QUEUED
  111. 61 00 b0 ff ff ff 4f 00 21d+11:15:27.642 WRITE FPDMA QUEUED
  112. 60 00 60 ff ff ff 4f 00 21d+11:15:27.633 READ FPDMA QUEUED
  113. 60 00 00 ff ff ff 4f 00 21d+11:15:27.612 READ FPDMA QUEUED
  114.  
  115. Error 37 occurred at disk power-on lifetime: 57417 hours (2392 days + 9 hours)
  116. When the command that caused the error occurred, the device was active or idle.
  117.  
  118. After command completion occurred, registers were:
  119. ER ST SC SN CL CH DH
  120. -- -- -- -- -- -- --
  121. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  122.  
  123. Commands leading to the command that caused the error were:
  124. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  125. -- -- -- -- -- -- -- -- ---------------- --------------------
  126. 60 00 08 ff ff ff 4f 00 21d+11:15:24.632 READ FPDMA QUEUED
  127. 60 00 08 ff ff ff 4f 00 21d+11:15:24.631 READ FPDMA QUEUED
  128. 60 00 08 ff ff ff 4f 00 21d+11:15:24.631 READ FPDMA QUEUED
  129. 60 00 08 ff ff ff 4f 00 21d+11:15:24.631 READ FPDMA QUEUED
  130. 60 00 08 ff ff ff 4f 00 21d+11:15:24.631 READ FPDMA QUEUED
  131.  
  132. Error 36 occurred at disk power-on lifetime: 57417 hours (2392 days + 9 hours)
  133. When the command that caused the error occurred, the device was active or idle.
  134.  
  135. After command completion occurred, registers were:
  136. ER ST SC SN CL CH DH
  137. -- -- -- -- -- -- --
  138. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  139.  
  140. Commands leading to the command that caused the error were:
  141. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  142. -- -- -- -- -- -- -- -- ---------------- --------------------
  143. 60 00 70 ff ff ff 4f 00 21d+11:15:21.407 READ FPDMA QUEUED
  144. 61 00 88 ff ff ff 4f 00 21d+11:15:21.360 WRITE FPDMA QUEUED
  145. 61 00 78 ff ff ff 4f 00 21d+11:15:21.357 WRITE FPDMA QUEUED
  146. 61 00 88 ff ff ff 4f 00 21d+11:15:21.355 WRITE FPDMA QUEUED
  147. 61 00 00 ff ff ff 4f 00 21d+11:15:21.354 WRITE FPDMA QUEUED
  148.  
  149. Error 35 occurred at disk power-on lifetime: 57417 hours (2392 days + 9 hours)
  150. When the command that caused the error occurred, the device was active or idle.
  151.  
  152. After command completion occurred, registers were:
  153. ER ST SC SN CL CH DH
  154. -- -- -- -- -- -- --
  155. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  156.  
  157. Commands leading to the command that caused the error were:
  158. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  159. -- -- -- -- -- -- -- -- ---------------- --------------------
  160. 60 00 08 ff ff ff 4f 00 21d+11:11:39.221 READ FPDMA QUEUED
  161. 61 00 00 ff ff ff 4f 00 21d+11:11:39.174 WRITE FPDMA QUEUED
  162. 60 00 00 ff ff ff 4f 00 21d+11:11:39.174 READ FPDMA QUEUED
  163. 61 00 00 ff ff ff 4f 00 21d+11:11:39.146 WRITE FPDMA QUEUED
  164. 61 00 00 ff ff ff 4f 00 21d+11:11:39.144 WRITE FPDMA QUEUED
  165.  
  166. Error 34 occurred at disk power-on lifetime: 57417 hours (2392 days + 9 hours)
  167. When the command that caused the error occurred, the device was active or idle.
  168.  
  169. After command completion occurred, registers were:
  170. ER ST SC SN CL CH DH
  171. -- -- -- -- -- -- --
  172. 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
  173.  
  174. Commands leading to the command that caused the error were:
  175. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  176. -- -- -- -- -- -- -- -- ---------------- --------------------
  177. 61 00 10 ff ff ff 4f 00 21d+11:11:38.316 WRITE FPDMA QUEUED
  178. 60 00 08 68 78 74 40 00 21d+11:11:38.316 READ FPDMA QUEUED
  179. 60 00 00 ff ff ff 4f 00 21d+11:11:36.182 READ FPDMA QUEUED
  180. 60 00 00 ff ff ff 4f 00 21d+11:11:36.182 READ FPDMA QUEUED
  181. 60 00 00 ff ff ff 4f 00 21d+11:11:36.182 READ FPDMA QUEUED
  182.  
  183. SMART Self-test log structure revision number 1
  184. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  185. # 1 Extended offline Completed without error 00% 53910 -
  186. # 2 Extended offline Completed without error 00% 50862 -
  187. # 3 Extended offline Completed without error 00% 50844 -
  188. # 4 Extended offline Completed without error 00% 39746 -
  189. # 5 Extended offline Completed without error 00% 39728 -
  190. # 6 Extended offline Completed without error 00% 39508 -
  191. # 7 Extended offline Completed without error 00% 39471 -
  192. # 8 Short offline Completed without error 00% 29850 -
  193. # 9 Short offline Completed without error 00% 11548 -
  194. #10 Extended offline Completed without error 00% 11324 -
  195. #11 Extended offline Completed without error 00% 11295 -
  196. #12 Extended offline Completed without error 00% 8371 -
  197. #13 Extended offline Completed without error 00% 8342 -
  198. #14 Extended offline Completed without error 00% 2408 -
  199. #15 Extended offline Completed without error 00% 2261 -
  200. #16 Extended offline Interrupted (host reset) 00% 2239 -
  201. #17 Extended offline Completed without error 00% 1904 -
  202.  
  203. SMART Selective self-test log data structure revision number 1
  204. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  205. 1 0 0 Not_testing
  206. 2 0 0 Not_testing
  207. 3 0 0 Not_testing
  208. 4 0 0 Not_testing
  209. 5 0 0 Not_testing
  210. Selective self-test flags (0x0):
  211. After scanning selected spans, do NOT read-scan remainder of disk.
  212. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!