3.8-rc3 after ACPI S3

lale1202 ~ # lsmod
Module                  Size  Used by
snd_hda_codec_hdmi     26240  1
snd_hda_codec_realtek    59577  1
snd_hda_intel          28071  0
snd_hda_codec          86622  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
e1000e                173972  0
virtio_blk              9770  0
virtio_pci              7045  0
virtio_ring             4202  2 virtio_blk,virtio_pci
virtio                  3530  2 virtio_blk,virtio_pci
iwldvm                124881  0
kvm_intel             119187  0
kvm                   258567  1 kvm_intel
sdhci_pci              10158  0
sdhci                  22871  1 sdhci_pci
mmc_core               80548  1 sdhci
iwlwifi                67110  1 iwldvm
snd_hwdep               5877  1 snd_hda_codec
aesni_intel            43106  6
aes_x86_64              7363  1 aesni_intel
lale1202 ~ # ethtool eth0
Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 2
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: on
        Supports Wake-on: pumbg
        Wake-on: g
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: yes
lale1202 ~ # mii-tool eth0
eth0: negotiated 1000baseT-FD flow-control, link ok
lale1202 ~ # ifconfig eth0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.125  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::3e97:eff:fe29:f780  prefixlen 64  scopeid 0x20<link>
        ether 3c:97:0e:29:f7:80  txqueuelen 1000  (Ethernet)
        RX packets 6  bytes 984 (984.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 17  bytes 1852 (1.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 20  memory 0xf1500000-f1520000
lale1202 ~ # dmesg | tail -30
[  355.127454] usb 2-1: link qh256-0001/ffff880213face00 start 1 [1/0 us]
[  355.189316] hub 3-0:1.0: hub_resume
[  355.189336] hub 3-0:1.0: port 1: status 0303 change 0000
[  355.189344] hub 3-0:1.0: port 2: status 0303 change 0000
[  355.401041] ata5: SATA link down (SStatus 0 SControl 300)
[  356.189124] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[  357.488952] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  357.490624] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[  357.490629] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[  357.491964] ata1.00: failed to get Identify Device Data, Emask 0x1
[  357.493775] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[  357.493780] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[  357.495079] ata1.00: failed to get Identify Device Data, Emask 0x1
[  357.495086] ata1.00: configured for UDMA/133
[  357.506024] sd 0:0:0:0: [sda] Starting disk
[  357.530792] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  357.537799] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  357.760793] PM: resume of devices complete after 2670.440 msecs
[  357.761680] hub 4-0:1.0: state 7 ports 4 chg 0000 evt 0000
[  357.761694] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
[  357.761702] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
[  357.761709] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
[  357.761716] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000
[  357.761722] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
[  357.761603] Restarting tasks ... done.
[  357.769010] video LNXVIDEO:00: Restoring backlight state
[  357.792597] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[  357.805609] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[  358.325578] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  358.325646] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready