[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35.10-dmar (root@hal) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1 SMP Sat Feb 19 20:42:04 GMT 2011 (Ubuntu 2.6.35-22.33-server 2.6.35.4)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.35.10-dmar root=/dev/mapper/vg_main-lv_root ro crashkernel=384M-2G:64M,2G-:128M quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000098800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfcf0000 (usable)
[    0.000000]  BIOS-e820: 00000000cfcf0000 - 00000000cfcf1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfcf1000 - 00000000cfd00000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cfd00000 - 00000000cfe00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFD00000 mask FFFFFFF00000 uncachable
[    0.000000]   4 base 0000CFE00000 mask FFFFFFE00000 uncachable
[    0.000000]   5 base 000100000000 mask FFFFE0000000 write-back
[    0.000000]   6 base 000120000000 mask FFFFF0000000 write-back
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000130000000 aka 4864M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000cfd00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcfcf0 max_arch_pfn = 0x400000000
[    0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 0000000000098800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000cfcf0000 (usable)
[    0.000000]  modified: 00000000cfcf0000 - 00000000cfcf1000 (ACPI NVS)
[    0.000000]  modified: 00000000cfcf1000 - 00000000cfd00000 (ACPI data)
[    0.000000]  modified: 00000000cfd00000 - 00000000cfe00000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] found SMP MP-table at [ffff8800000f46f0] f46f0
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000cfcf0000
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00cfc00000 page 2M
[    0.000000]  00cfc00000 - 00cfcf0000 page 4k
[    0.000000] kernel direct mapping tables up to cfcf0000 @ 16000-19000
[    0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[    0.000000]  0100000000 - 0130000000 page 2M
[    0.000000] kernel direct mapping tables up to 130000000 @ 18000-1a000
[    0.000000] RAMDISK: 37431000 - 37ff0000
[    0.000000] Reserving 128MB of memory at 32MB for crashkernel (System RAM: 4864MB)
[    0.000000] ACPI: RSDP 00000000000f6100 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000cfcf1000 00044 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000cfcf1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000cfcf1100 07BE3 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000cfcf0000 00040
[    0.000000] ACPI: SSDT 00000000cfcf8dc0 006E8 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 00000000cfcf94c0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000cfcf9500 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: MATS 00000000cfcf9540 00034 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 00000000cfcf95b0 00202 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 00000000cfcf8d00 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: IVRS 00000000cfcf9830 000E0 (v01  AMD     RD890S 00202031 AMD  00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000130000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[    0.000000]   NODE_DATA [0000000100000000 - 0000000100004fff]
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880100200000-ffff880103bfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00130000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x00000098
[    0.000000]     0: 0x00000100 -> 0x000cfcf0
[    0.000000]     0: 0x00100000 -> 0x00130000
[    0.000000] On node 0 totalpages: 1047672
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 832808 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 5 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] early_res array is doubled to 64 at [19000 - 197ff]
[    0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cfcf0000 - 00000000cfcf1000
[    0.000000] PM: Registered nosave memory: 00000000cfcf1000 - 00000000cfd00000
[    0.000000] PM: Registered nosave memory: 00000000cfd00000 - 00000000cfe00000
[    0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u262144
[    0.000000] pcpu-alloc: s91520 r8192 d23168 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] early_res array is doubled to 128 at [19800 - 1a7ff]
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1030648
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.35.10-dmar root=/dev/mapper/vg_main-lv_root ro crashkernel=384M-2G:64M,2G-:128M quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 20000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[    0.000000] Subtract (63 early reservations)
[    0.000000]   #1 [0001000000 - 0001d1aa14]   TEXT DATA BSS
[    0.000000]   #2 [0037431000 - 0037ff0000]         RAMDISK
[    0.000000]   #3 [0001d1b000 - 0001d1b0fe]             BRK
[    0.000000]   #4 [00000f4700 - 0000100000]   BIOS reserved
[    0.000000]   #5 [00000f46f0 - 00000f4700]    MP-table mpf
[    0.000000]   #6 [0000098800 - 00000f1af4]   BIOS reserved
[    0.000000]   #7 [00000f1cf4 - 00000f46f0]   BIOS reserved
[    0.000000]   #8 [00000f1af4 - 00000f1cf4]    MP-table mpc
[    0.000000]   #9 [0000010000 - 0000012000]      TRAMPOLINE
[    0.000000]   #10 [0000012000 - 0000016000]     ACPI WAKEUP
[    0.000000]   #11 [0000016000 - 0000018000]         PGTABLE
[    0.000000]   #12 [0000018000 - 0000019000]         PGTABLE
[    0.000000]   #13 [0002000000 - 000a000000]    CRASH KERNEL
[    0.000000]   #14 [0100000000 - 0100005000]       NODE_DATA
[    0.000000]   #15 [0001d1b100 - 0001d1c100]         BOOTMEM
[    0.000000]   #16 [0100005000 - 0100005300]         BOOTMEM
[    0.000000]   #17 [0100006000 - 0100007000]         BOOTMEM
[    0.000000]   #18 [0100007000 - 0100008000]         BOOTMEM
[    0.000000]   #19 [0100200000 - 0103c00000]        MEMMAP 0
[    0.000000]   #20 [0001d1c100 - 0001d34100]         BOOTMEM
[    0.000000]   #21 [0001d34100 - 0001d4c100]         BOOTMEM
[    0.000000]   #22 [0001d4c100 - 0001d64100]         BOOTMEM
[    0.000000]   #23 [0001d65000 - 0001d66000]         BOOTMEM
[    0.000000]   #24 [0001d1aa40 - 0001d1aa81]         BOOTMEM
[    0.000000]   #25 [0001d1aac0 - 0001d1ab03]         BOOTMEM
[    0.000000]   #26 [0001d1ab40 - 0001d1ada8]         BOOTMEM
[    0.000000]   #27 [0001d1adc0 - 0001d1ae28]         BOOTMEM
[    0.000000]   #28 [0001d1ae40 - 0001d1aea8]         BOOTMEM
[    0.000000]   #29 [0001d1aec0 - 0001d1af28]         BOOTMEM
[    0.000000]   #30 [0001d1af40 - 0001d1afa8]         BOOTMEM
[    0.000000]   #31 [0001d64100 - 0001d64168]         BOOTMEM
[    0.000000]   #32 [0001d64180 - 0001d641e8]         BOOTMEM
[    0.000000]   #33 [0001d64200 - 0001d64268]         BOOTMEM
[    0.000000]   #34 [0001d64280 - 0001d642e8]         BOOTMEM
[    0.000000]   #35 [0001d64300 - 0001d64368]         BOOTMEM
[    0.000000]   #36 [0001d64380 - 0001d643e8]         BOOTMEM
[    0.000000]   #37 [0001d1afc0 - 0001d1afe0]         BOOTMEM
[    0.000000]   #38 [0001d64400 - 0001d64420]         BOOTMEM
[    0.000000]   #39 [0001d64440 - 0001d644ae]         BOOTMEM
[    0.000000]   #40 [0001d644c0 - 0001d6452e]         BOOTMEM
[    0.000000]   #41 [0001e00000 - 0001e1e000]         BOOTMEM
[    0.000000]   #42 [0001e40000 - 0001e5e000]         BOOTMEM
[    0.000000]   #43 [0001e80000 - 0001e9e000]         BOOTMEM
[    0.000000]   #44 [0001ec0000 - 0001ede000]         BOOTMEM
[    0.000000]   #45 [0001f00000 - 0001f1e000]         BOOTMEM
[    0.000000]   #46 [0001f40000 - 0001f5e000]         BOOTMEM
[    0.000000]   #47 [0001f80000 - 0001f9e000]         BOOTMEM
[    0.000000]   #48 [0001fc0000 - 0001fde000]         BOOTMEM
[    0.000000]   #49 [0001d64540 - 0001d64548]         BOOTMEM
[    0.000000]   #50 [0001d64580 - 0001d64588]         BOOTMEM
[    0.000000]   #51 [0001d645c0 - 0001d645e0]         BOOTMEM
[    0.000000]   #52 [0001d64600 - 0001d64640]         BOOTMEM
[    0.000000]   #53 [0001d64640 - 0001d64760]         BOOTMEM
[    0.000000]   #54 [0001d64780 - 0001d647c8]         BOOTMEM
[    0.000000]   #55 [0001d64800 - 0001d64848]         BOOTMEM
[    0.000000]   #56 [0001d66000 - 0001d6e000]         BOOTMEM
[    0.000000]   #57 [0020000000 - 0024000000]         BOOTMEM
[    0.000000]   #58 [0001d64880 - 0001d648a0]         BOOTMEM
[    0.000000]   #59 [000a000000 - 000e000000]         BOOTMEM
[    0.000000]   #60 [0001d6e000 - 0001d8e000]         BOOTMEM
[    0.000000]   #61 [0001d8e000 - 0001dce000]         BOOTMEM
[    0.000000]   #62 [000001a800 - 0000022800]         BOOTMEM
[    0.000000] Memory: 3841924k/4980736k available (5768k kernel code, 790048k absent, 348764k reserved, 5415k data, 828k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000]  Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:4352 nr_irqs:744
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 41943040 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2812.380 MHz processor.
[    0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5624.75 BogoMIPS (lpj=28123760)
[    0.010010] pid_max: default: 32768 minimum: 301
[    0.010027] Security Framework initialized
[    0.010040] AppArmor: AppArmor initialized
[    0.010042] Yama: becoming mindful.
[    0.010401] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.011588] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.012103] Mount-cache hash table entries: 256
[    0.012198] Initializing cgroup subsys ns
[    0.012200] Initializing cgroup subsys cpuacct
[    0.012204] Initializing cgroup subsys memory
[    0.012211] Initializing cgroup subsys devices
[    0.012213] Initializing cgroup subsys freezer
[    0.012214] Initializing cgroup subsys net_cls
[    0.012233] tseg: 00cfe00000
[    0.012235] CPU: Physical Processor ID: 0
[    0.012236] CPU: Processor Core ID: 0
[    0.012238] mce: CPU supports 6 MCE banks
[    0.012245] Performance Events: AMD PMU driver.
[    0.012249] ... version:                0
[    0.012251] ... bit width:              48
[    0.012252] ... generic registers:      4
[    0.012253] ... value mask:             0000ffffffffffff
[    0.012255] ... max period:             00007fffffffffff
[    0.012256] ... fixed-purpose events:   0
[    0.012258] ... event mask:             000000000000000f
[    0.013601] ACPI: Core revision 20100428
[    0.030022] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.030030] ftrace: allocating 21719 entries in 86 pages
[    0.040064] Setting APIC routing to flat
[    0.040326] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.143507] CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
[    0.150000] Booting Node   0, Processors  #1 #2
[    0.480004] Brought up 3 CPUs
[    0.480006] Total of 3 processors activated (16876.44 BogoMIPS).
[    0.481234] devtmpfs: initialized
[    0.482253] regulator: core version 0.5
[    0.482253] Time: 22:02:23  Date: 02/21/11
[    0.482253] NET: Registered protocol family 16
[    0.482253] node 0 link 0: io port [6000, ffff]
[    0.482253] TOM: 00000000d0000000 aka 3328M
[    0.482253] Fam 10h mmconf [e0000000, e00fffff]
[    0.482253] node 0 link 0: mmio [a0000, bffff]
[    0.482253] node 0 link 0: mmio [d0000000, dfffffff]
[    0.482253] node 0 link 0: mmio [f0000000, ffffffff]
[    0.482253] node 0 link 0: mmio [e0000000, e09fffff] ==> [e0100000, e09fffff]
[    0.482253] TOM2: 0000000130000000 aka 4864M
[    0.482253] bus: [00, 09] on node 0 link 0
[    0.482253] bus: 00 index 0 [io  0x0000-0xffff]
[    0.482253] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.482253] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[    0.482253] bus: 00 index 3 [mem 0xe0a00000-0xffffffff]
[    0.482253] bus: 00 index 4 [mem 0xe0100000-0xe09fffff]
[    0.482253] Trying to unpack rootfs image as initramfs...
[    0.482253] bus: 00 index 5 [mem 0x130000000-0xfcffffffff]
[    0.482253] ACPI: bus type pci registered
[    0.482253] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.482253] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.502637] PCI: Using configuration type 1 for base access
[    0.503107] bio: create slab <bio-0> at 0
[    0.503253] ACPI: EC: Look up EC in DSDT
[    0.503253] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[    0.503253]
[    0.503253] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[    0.503253]
[    0.510620] ACPI: Interpreter enabled
[    0.510624] ACPI: (supports S0 S3 S4 S5)
[    0.510642] ACPI: Using IOAPIC for interrupt routing
[    0.514647] ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20100428/tbutils-314)
[    0.514753] ACPI: No dock devices found.
[    0.514756] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.514842] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.515007] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.515009] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.515011] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.515013] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.515015] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
[    0.515033] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[    0.515116] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.515118] pci 0000:00:02.0: PME# disabled
[    0.515148] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.515150] pci 0000:00:04.0: PME# disabled
[    0.515178] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.515180] pci 0000:00:05.0: PME# disabled
[    0.515208] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.515210] pci 0000:00:06.0: PME# disabled
[    0.515238] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.515240] pci 0000:00:07.0: PME# disabled
[    0.515268] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.515270] pci 0000:00:09.0: PME# disabled
[    0.515298] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.515300] pci 0000:00:0a.0: PME# disabled
[    0.515335] pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
[    0.515340] pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
[    0.515345] pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
[    0.515349] pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
[    0.515354] pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
[    0.515359] pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
[    0.515402] pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
[    0.515447] pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
[    0.515483] pci 0000:00:12.2: supports D1 D2
[    0.515484] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.515487] pci 0000:00:12.2: PME# disabled
[    0.515508] pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
[    0.515554] pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
[    0.515589] pci 0000:00:13.2: supports D1 D2
[    0.515590] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.515593] pci 0000:00:13.2: PME# disabled
[    0.515657] pci 0000:00:14.2: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[    0.515687] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.515690] pci 0000:00:14.2: PME# disabled
[    0.515761] pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
[    0.515828] pci 0000:00:15.0: supports D1 D2
[    0.515855] pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
[    0.515900] pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
[    0.515936] pci 0000:00:16.2: supports D1 D2
[    0.515937] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.515940] pci 0000:00:16.2: PME# disabled
[    0.516044] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.516051] pci 0000:01:00.0: reg 18: [mem 0xfdae0000-0xfdaeffff 64bit]
[    0.516055] pci 0000:01:00.0: reg 20: [io  0xce00-0xceff]
[    0.516062] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.516077] pci 0000:01:00.0: supports D1 D2
[    0.516101] pci 0000:01:00.1: reg 10: [mem 0xfdafc000-0xfdafffff 64bit]
[    0.516130] pci 0000:01:00.1: supports D1 D2
[    0.530017] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.530022] pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
[    0.530024] pci 0000:00:02.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.530028] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.530076] pci 0000:02:00.0: reg 10: [mem 0xfd9fe000-0xfd9fffff 64bit]
[    0.530118] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.530121] pci 0000:02:00.0: PME# disabled
[    0.550018] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    0.550022] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.550025] pci 0000:00:04.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.550028] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[    0.550050] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[    0.550053] pci 0000:00:05.0:   bridge window [io  0xa000-0xafff]
[    0.550055] pci 0000:00:05.0:   bridge window [mem 0xfd700000-0xfd7fffff]
[    0.550058] pci 0000:00:05.0:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[    0.550077] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[    0.550080] pci 0000:00:06.0:   bridge window [io  0x9000-0x9fff]
[    0.550082] pci 0000:00:06.0:   bridge window [mem 0xfd500000-0xfd5fffff]
[    0.550085] pci 0000:00:06.0:   bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
[    0.550123] pci 0000:05:00.0: reg 10: [io  0x8e00-0x8eff]
[    0.550136] pci 0000:05:00.0: reg 18: [mem 0xfceff000-0xfcefffff 64bit pref]
[    0.550145] pci 0000:05:00.0: reg 20: [mem 0xfcef8000-0xfcefbfff 64bit pref]
[    0.550151] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.550179] pci 0000:05:00.0: supports D1 D2
[    0.550181] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.550184] pci 0000:05:00.0: PME# disabled
[    0.570018] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[    0.570023] pci 0000:00:07.0:   bridge window [io  0x8000-0x8fff]
[    0.570025] pci 0000:00:07.0:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.570028] pci 0000:00:07.0:   bridge window [mem 0xfce00000-0xfcefffff 64bit pref]
[    0.570050] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[    0.570053] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.570055] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.570058] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.570128] pci 0000:07:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff]
[    0.570134] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.570159] pci 0000:07:00.0: PME# supported from D3hot
[    0.570163] pci 0000:07:00.0: PME# disabled
[    0.570197] pci 0000:07:00.1: reg 10: [io  0xdf00-0xdf07]
[    0.570203] pci 0000:07:00.1: reg 14: [io  0xde00-0xde03]
[    0.570209] pci 0000:07:00.1: reg 18: [io  0xdd00-0xdd07]
[    0.570215] pci 0000:07:00.1: reg 1c: [io  0xdc00-0xdc03]
[    0.570221] pci 0000:07:00.1: reg 20: [io  0xdb00-0xdb0f]
[    0.570263] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.570272] pci 0000:00:0a.0: PCI bridge to [bus 07-07]
[    0.570275] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.570277] pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.570280] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.570342] pci 0000:08:06.0: reg 20: [io  0x7f00-0x7f1f]
[    0.570369] pci 0000:08:06.0: supports D1 D2
[    0.570370] pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot
[    0.570373] pci 0000:08:06.0: PME# disabled
[    0.570418] pci 0000:08:06.1: reg 20: [io  0x7e00-0x7e1f]
[    0.570445] pci 0000:08:06.1: supports D1 D2
[    0.570446] pci 0000:08:06.1: PME# supported from D0 D1 D2 D3hot
[    0.570450] pci 0000:08:06.1: PME# disabled
[    0.570477] pci 0000:08:06.2: reg 10: [mem 0xfd4ff000-0xfd4ff0ff]
[    0.570522] pci 0000:08:06.2: supports D1 D2
[    0.570523] pci 0000:08:06.2: PME# supported from D0 D1 D2 D3hot
[    0.570526] pci 0000:08:06.2: PME# disabled
[    0.570570] pci 0000:08:0e.0: reg 10: [mem 0xfd4fe000-0xfd4fe7ff]
[    0.570576] pci 0000:08:0e.0: reg 14: [mem 0xfd4f8000-0xfd4fbfff]
[    0.570621] pci 0000:08:0e.0: supports D1 D2
[    0.570622] pci 0000:08:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.570626] pci 0000:08:0e.0: PME# disabled
[    0.570653] pci 0000:00:14.4: PCI bridge to [bus 08-08] (subtractive decode)
[    0.570656] pci 0000:00:14.4:   bridge window [io  0x7000-0x7fff]
[    0.570659] pci 0000:00:14.4:   bridge window [mem 0xfd400000-0xfd4fffff]
[    0.570662] pci 0000:00:14.4:   bridge window [mem 0xfd300000-0xfd3fffff pref]
[    0.570664] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.570666] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.570668] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.570669] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.570671] pci 0000:00:14.4:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[    0.570769] pci 0000:09:00.0: reg 24: [mem 0xfd1fe000-0xfd1fffff]
[    0.570777] pci 0000:09:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.570805] pci 0000:09:00.0: PME# supported from D3hot
[    0.570809] pci 0000:09:00.0: PME# disabled
[    0.570851] pci 0000:09:00.1: reg 10: [io  0x6f00-0x6f07]
[    0.570858] pci 0000:09:00.1: reg 14: [io  0x6e00-0x6e03]
[    0.570866] pci 0000:09:00.1: reg 18: [io  0x6d00-0x6d07]
[    0.570873] pci 0000:09:00.1: reg 1c: [io  0x6c00-0x6c03]
[    0.570881] pci 0000:09:00.1: reg 20: [io  0x6b00-0x6b0f]
[    0.570934] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.570945] pci 0000:00:15.0: PCI bridge to [bus 09-09]
[    0.570949] pci 0000:00:15.0:   bridge window [io  0x6000-0x6fff]
[    0.570952] pci 0000:00:15.0:   bridge window [mem 0xfd100000-0xfd1fffff]
[    0.570956] pci 0000:00:15.0:   bridge window [mem 0xfd000000-0xfd0fffff 64bit pref]
[    0.570980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.571224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.571275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.571325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[    0.571364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[    0.571401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[    0.571438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[    0.571474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[    0.571511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[    0.571549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[    0.598151] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[    0.598232] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[    0.598310] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[    0.598386] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[    0.598463] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[    0.598540] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[    0.598618] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[    0.598694] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[    0.598725] HEST: Table is not found!
[    0.598785] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.598790] vgaarb: loaded
[    0.598884] SCSI subsystem initialized
[    0.598903] libata version 3.00 loaded.
[    0.598903] usbcore: registered new interface driver usbfs
[    0.598903] usbcore: registered new interface driver hub
[    0.598903] usbcore: registered new device driver usb
[    0.598903] ACPI: WMI: Mapper loaded
[    0.598903] PCI: Using ACPI for IRQ routing
[    0.598903] PCI: pci_cache_line_size set to 64 bytes
[    0.598903] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[    0.598903] reserve RAM buffer: 0000000000098800 - 000000000009ffff
[    0.598903] reserve RAM buffer: 00000000cfcf0000 - 00000000cfffffff
[    0.598903] NetLabel: Initializing
[    0.598903] NetLabel:  domain hash size = 128
[    0.598903] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.598903] NetLabel:  unlabeled traffic allowed by default
[    0.598903] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.598903] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.601030] Switching to clocksource tsc
[    0.605497] AppArmor: AppArmor Filesystem Enabled
[    0.605508] pnp: PnP ACPI init
[    0.605517] ACPI: bus type pnp registered
[    0.606123] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.606150] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.606155] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.606159] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:07:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[    0.606172] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:09:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[    0.607325] pnp 00:08: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.607328] pnp 00:08: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.607331] pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.607334] pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.607337] pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.607339] pnp 00:08: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.607423] pnp: PnP ACPI: found 9 devices
[    0.607424] ACPI: ACPI bus type pnp unregistered
[    0.607432] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.607434] system 00:01: [io  0x0220-0x0225] has been reserved
[    0.607436] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.607439] system 00:02: [io  0x0900-0x091f] has been reserved
[    0.607441] system 00:02: [io  0x0228-0x022f] has been reserved
[    0.607443] system 00:02: [io  0x040b] has been reserved
[    0.607444] system 00:02: [io  0x04d6] has been reserved
[    0.607446] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.607448] system 00:02: [io  0x0c14] has been reserved
[    0.607450] system 00:02: [io  0x0c50-0x0c52] has been reserved
[    0.607452] system 00:02: [io  0x0c6c-0x0c6d] has been reserved
[    0.607454] system 00:02: [io  0x0c6f] has been reserved
[    0.607455] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    0.607457] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    0.607459] system 00:02: [io  0x0cd4-0x0cdf] has been reserved
[    0.607461] system 00:02: [io  0x0800-0x08fe] has been reserved
[    0.607463] system 00:02: [io  0x0a10-0x0a17] has been reserved
[    0.607465] system 00:02: [io  0x0b00-0x0b0f] has been reserved
[    0.607467] system 00:02: [io  0x0b10-0x0b1f] has been reserved
[    0.607469] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    0.607471] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.607475] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.607479] system 00:08: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
[    0.607481] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
[    0.607483] system 00:08: [mem 0xcfd00000-0xcfdfffff] has been reserved
[    0.607485] system 00:08: [mem 0xcfe00000-0xcfefffff] could not be reserved
[    0.607487] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.607490] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.607492] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.612900] pci 0000:01:00.0: BAR 6: assigned [mem 0xfda00000-0xfda1ffff pref]
[    0.612902] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.612905] pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
[    0.612907] pci 0000:00:02.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.612910] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.612913] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    0.612915] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.612918] pci 0000:00:04.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.612920] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[    0.612923] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[    0.612925] pci 0000:00:05.0:   bridge window [io  0xa000-0xafff]
[    0.612928] pci 0000:00:05.0:   bridge window [mem 0xfd700000-0xfd7fffff]
[    0.612930] pci 0000:00:05.0:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[    0.612933] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[    0.612935] pci 0000:00:06.0:   bridge window [io  0x9000-0x9fff]
[    0.612938] pci 0000:00:06.0:   bridge window [mem 0xfd500000-0xfd5fffff]
[    0.612940] pci 0000:00:06.0:   bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
[    0.612944] pci 0000:05:00.0: BAR 6: assigned [mem 0xfce00000-0xfce1ffff pref]
[    0.612946] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[    0.612948] pci 0000:00:07.0:   bridge window [io  0x8000-0x8fff]
[    0.612950] pci 0000:00:07.0:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.612953] pci 0000:00:07.0:   bridge window [mem 0xfce00000-0xfcefffff 64bit pref]
[    0.612956] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[    0.612958] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.612960] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.612963] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.612966] pci 0000:07:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref]
[    0.612968] pci 0000:00:0a.0: PCI bridge to [bus 07-07]
[    0.612970] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.612973] pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.612975] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.612979] pci 0000:00:14.4: PCI bridge to [bus 08-08]
[    0.612981] pci 0000:00:14.4:   bridge window [io  0x7000-0x7fff]
[    0.612985] pci 0000:00:14.4:   bridge window [mem 0xfd400000-0xfd4fffff]
[    0.612989] pci 0000:00:14.4:   bridge window [mem 0xfd300000-0xfd3fffff pref]
[    0.612994] pci 0000:09:00.0: BAR 6: assigned [mem 0xfd000000-0xfd00ffff pref]
[    0.612996] pci 0000:00:15.0: PCI bridge to [bus 09-09]
[    0.612998] pci 0000:00:15.0:   bridge window [io  0x6000-0x6fff]
[    0.613002] pci 0000:00:15.0:   bridge window [mem 0xfd100000-0xfd1fffff]
[    0.613005] pci 0000:00:15.0:   bridge window [mem 0xfd000000-0xfd0fffff 64bit pref]
[    0.613014]   alloc irq_desc for 18 on node 0
[    0.613015]   alloc kstat_irqs on node 0
[    0.613020] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.613023] pci 0000:00:02.0: setting latency timer to 64
[    0.613028]   alloc irq_desc for 16 on node 0
[    0.613029]   alloc kstat_irqs on node 0
[    0.613032] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.613034] pci 0000:00:04.0: setting latency timer to 64
[    0.613038]   alloc irq_desc for 17 on node 0
[    0.613039]   alloc kstat_irqs on node 0
[    0.613042] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.613044] pci 0000:00:05.0: setting latency timer to 64
[    0.613048] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.613051] pci 0000:00:06.0: setting latency timer to 64
[    0.613055]   alloc irq_desc for 19 on node 0
[    0.613056]   alloc kstat_irqs on node 0
[    0.613058] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.613060] pci 0000:00:07.0: setting latency timer to 64
[    0.613065] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.613067] pci 0000:00:09.0: setting latency timer to 64
[    0.613071] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.613073] pci 0000:00:0a.0: setting latency timer to 64
[    0.613082] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.613085] pci 0000:00:15.0: setting latency timer to 64
[    0.613088] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.613090] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.613092] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.613093] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.613095] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.613097] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.613099] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdafffff]
[    0.613101] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.613103] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.613105] pci_bus 0000:02: resource 1 [mem 0xfd900000-0xfd9fffff]
[    0.613107] pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[    0.613109] pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
[    0.613110] pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd7fffff]
[    0.613112] pci_bus 0000:03: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
[    0.613114] pci_bus 0000:04: resource 0 [io  0x9000-0x9fff]
[    0.613116] pci_bus 0000:04: resource 1 [mem 0xfd500000-0xfd5fffff]
[    0.613118] pci_bus 0000:04: resource 2 [mem 0xfd200000-0xfd2fffff 64bit pref]
[    0.613120] pci_bus 0000:05: resource 0 [io  0x8000-0x8fff]
[    0.613122] pci_bus 0000:05: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.613124] pci_bus 0000:05: resource 2 [mem 0xfce00000-0xfcefffff 64bit pref]
[    0.613126] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
[    0.613127] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.613129] pci_bus 0000:06: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.613131] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
[    0.613133] pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.613135] pci_bus 0000:07: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.613137] pci_bus 0000:08: resource 0 [io  0x7000-0x7fff]
[    0.613139] pci_bus 0000:08: resource 1 [mem 0xfd400000-0xfd4fffff]
[    0.613141] pci_bus 0000:08: resource 2 [mem 0xfd300000-0xfd3fffff pref]
[    0.613142] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
[    0.613144] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
[    0.613146] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[    0.613148] pci_bus 0000:08: resource 7 [mem 0x000c0000-0x000dffff]
[    0.613150] pci_bus 0000:08: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.613152] pci_bus 0000:09: resource 0 [io  0x6000-0x6fff]
[    0.613153] pci_bus 0000:09: resource 1 [mem 0xfd100000-0xfd1fffff]
[    0.613155] pci_bus 0000:09: resource 2 [mem 0xfd000000-0xfd0fffff 64bit pref]
[    0.613182] NET: Registered protocol family 2
[    0.613301] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.614223] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.616405] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.616671] TCP: Hash tables configured (established 524288 bind 65536)
[    0.616673] TCP reno registered
[    0.616681] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.616710] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.616813] NET: Registered protocol family 1
[    0.692184] Freeing initrd memory: 12028k freed
[    0.698527] pci 0000:01:00.0: Boot video device
[    0.698604] PCI: CLS 64 bytes, default 64
[    0.698752] pci 0000:00:00.2: can't derive routing for PCI INT A
[    0.698754] pci 0000:00:00.2: PCI INT A: no GSI
[    0.698970]   alloc irq_desc for 40 on node 0
[    0.698972]   alloc kstat_irqs on node 0
[    0.698979] pci 0000:00:00.2: irq 40 for MSI/MSI-X
[    0.698992] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40
[    0.710287] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.712053] Scanning for low memory corruption every 60 seconds
[    0.712143] audit: initializing netlink socket (disabled)
[    0.712152] type=2000 audit(1298325742.700:1): initialized
[    0.721670] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.722634] VFS: Disk quotas dquot_6.5.2
[    0.722673] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.723076] fuse init (API version 7.14)
[    0.723129] msgmni has been set to 7656
[    0.724590] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.724592] io scheduler noop registered
[    0.724594] io scheduler deadline registered (default)
[    0.724618] io scheduler cfq registered
[    0.724726] pcieport 0000:00:02.0: setting latency timer to 64
[    0.724744]   alloc irq_desc for 41 on node 0
[    0.724746]   alloc kstat_irqs on node 0
[    0.724752] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
[    0.724812] pcieport 0000:00:04.0: setting latency timer to 64
[    0.724827]   alloc irq_desc for 42 on node 0
[    0.724828]   alloc kstat_irqs on node 0
[    0.724832] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
[    0.724884] pcieport 0000:00:05.0: setting latency timer to 64
[    0.724898]   alloc irq_desc for 43 on node 0
[    0.724899]   alloc kstat_irqs on node 0
[    0.724902] pcieport 0000:00:05.0: irq 43 for MSI/MSI-X
[    0.724949] pcieport 0000:00:06.0: setting latency timer to 64
[    0.724963]   alloc irq_desc for 44 on node 0
[    0.724964]   alloc kstat_irqs on node 0
[    0.724968] pcieport 0000:00:06.0: irq 44 for MSI/MSI-X
[    0.725014] pcieport 0000:00:07.0: setting latency timer to 64
[    0.725028]   alloc irq_desc for 45 on node 0
[    0.725029]   alloc kstat_irqs on node 0
[    0.725032] pcieport 0000:00:07.0: irq 45 for MSI/MSI-X
[    0.725079] pcieport 0000:00:09.0: setting latency timer to 64
[    0.725093]   alloc irq_desc for 46 on node 0
[    0.725094]   alloc kstat_irqs on node 0
[    0.725097] pcieport 0000:00:09.0: irq 46 for MSI/MSI-X
[    0.725144] pcieport 0000:00:0a.0: setting latency timer to 64
[    0.725158]   alloc irq_desc for 47 on node 0
[    0.725159]   alloc kstat_irqs on node 0
[    0.725162] pcieport 0000:00:0a.0: irq 47 for MSI/MSI-X
[    0.725213] pcieport 0000:00:15.0: setting latency timer to 64
[    0.725239]   alloc irq_desc for 48 on node 0
[    0.725240]   alloc kstat_irqs on node 0
[    0.725245] pcieport 0000:00:15.0: irq 48 for MSI/MSI-X
[    0.725310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.725350] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.725359] pci-stub: invalid id string ""
[    0.725467] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.725471] ACPI: Power Button [PWRB]
[    0.725504] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.725506] ACPI: Power Button [PWRF]
[    0.725710] ACPI: acpi_idle registered with cpuidle
[    0.727530] ERST: Table is not found!
[    0.727617] Linux agpgart interface v0.103
[    0.727620] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.728426] brd: module loaded
[    0.728740] loop: module loaded
[    0.728936] pata_acpi 0000:07:00.1: enabling device (0000 -> 0001)
[    0.728943] pata_acpi 0000:07:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.728959] pata_acpi 0000:07:00.1: BMDMA: failed to set dma mask, falling back to PIO
[    0.728968] pata_acpi 0000:07:00.1: setting latency timer to 64
[    0.728978] pata_acpi 0000:07:00.1: PCI INT B disabled
[    0.729021] pata_acpi 0000:09:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.729035] pata_acpi 0000:09:00.1: setting latency timer to 64
[    0.729043] pata_acpi 0000:09:00.1: PCI INT B disabled
[    0.729285] Fixed MDIO Bus: probed
[    0.729308] PPP generic driver version 2.4.2
[    0.729350] tun: Universal TUN/TAP device driver, 1.6
[    0.729351] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.729408] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.729442] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.729461] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    0.729497] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    0.729524] ehci_hcd 0000:00:12.2: debug port 1
[    0.729542] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
[    0.748423] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.748515] hub 1-0:1.0: USB hub found
[    0.748518] hub 1-0:1.0: 5 ports detected
[    0.748602] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.748613] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    0.748636] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    0.748660] ehci_hcd 0000:00:13.2: debug port 1
[    0.748670] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
[    0.768447] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.768526] hub 2-0:1.0: USB hub found
[    0.768529] hub 2-0:1.0: 5 ports detected
[    0.768608] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.768619] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    0.768644] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[    0.768667] ehci_hcd 0000:00:16.2: debug port 1
[    0.768676] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
[    0.788430] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    0.788507] hub 3-0:1.0: USB hub found
[    0.788510] hub 3-0:1.0: 4 ports detected
[    0.788590]   alloc irq_desc for 22 on node 0
[    0.788592]   alloc kstat_irqs on node 0
[    0.788596] ehci_hcd 0000:08:06.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.788608] ehci_hcd 0000:08:06.2: EHCI Host Controller
[    0.788631] ehci_hcd 0000:08:06.2: new USB bus registered, assigned bus number 4
[    0.788670] ehci_hcd 0000:08:06.2: irq 22, io mem 0xfd4ff000
[    0.808434] ehci_hcd 0000:08:06.2: USB 2.0 started, EHCI 1.00
[    0.808509] hub 4-0:1.0: USB hub found
[    0.808512] hub 4-0:1.0: 4 ports detected
[    0.808578] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.808614] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.808625] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    0.808648] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5
[    0.808670] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
[    0.872543] hub 5-0:1.0: USB hub found
[    0.872548] hub 5-0:1.0: 5 ports detected
[    0.872632] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.872644] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.872675] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
[    0.872690] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
[    0.932537] hub 6-0:1.0: USB hub found
[    0.932542] hub 6-0:1.0: 5 ports detected
[    0.932626] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.932637] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    0.932662] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    0.932678] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
[    0.992546] hub 7-0:1.0: USB hub found
[    0.992551] hub 7-0:1.0: 2 ports detected
[    0.992632] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.992643] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    0.992665] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 8
[    0.992681] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
[    1.054101] hub 8-0:1.0: USB hub found
[    1.054106] hub 8-0:1.0: 4 ports detected
[    1.054179] uhci_hcd: USB Universal Host Controller Interface driver
[    1.054244]   alloc irq_desc for 20 on node 0
[    1.054246]   alloc kstat_irqs on node 0
[    1.054250] uhci_hcd 0000:08:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.054256] uhci_hcd 0000:08:06.0: UHCI Host Controller
[    1.054279] uhci_hcd 0000:08:06.0: new USB bus registered, assigned bus number 9
[    1.054309] uhci_hcd 0000:08:06.0: irq 20, io base 0x00007f00
[    1.054382] hub 9-0:1.0: USB hub found
[    1.054385] hub 9-0:1.0: 2 ports detected
[    1.054452]   alloc irq_desc for 21 on node 0
[    1.054453]   alloc kstat_irqs on node 0
[    1.054456] uhci_hcd 0000:08:06.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.054461] uhci_hcd 0000:08:06.1: UHCI Host Controller
[    1.054482] uhci_hcd 0000:08:06.1: new USB bus registered, assigned bus number 10
[    1.054509] uhci_hcd 0000:08:06.1: irq 21, io base 0x00007e00
[    1.054579] hub 10-0:1.0: USB hub found
[    1.054581] hub 10-0:1.0: 2 ports detected
[    1.054654] PNP: No PS/2 controller found. Probing ports directly.
[    1.083042] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    1.088572] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    1.088574] If AUX port is really absent please use the 'i8042.noaux' option.
[    1.330139] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.330200] mice: PS/2 mouse device common for all mice
[    1.330268] rtc_cmos 00:04: RTC can wake from S4
[    1.330291] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.330308] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.330369] device-mapper: uevent: version 1.0.3
[    1.330447] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    1.330516] device-mapper: multipath: version 1.1.1 loaded
[    1.330518] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.330664] cpuidle: using governor ladder
[    1.330665] cpuidle: using governor menu
[    1.330849] TCP cubic registered
[    1.330926] NET: Registered protocol family 10
[    1.331186] lo: Disabled Privacy Extensions
[    1.331331] NET: Registered protocol family 17
[    1.331356] powernow-k8: Found 1 AMD Phenom(tm) II X3 720 Processor (3 cpu cores) (version 2.20.00)
[    1.331385] powernow-k8:    0 : pstate 0 (2800 MHz)
[    1.331386] powernow-k8:    1 : pstate 1 (2100 MHz)
[    1.331388] powernow-k8:    2 : pstate 2 (1600 MHz)
[    1.331389] powernow-k8:    3 : pstate 3 (800 MHz)
[    1.331603] PM: Resume from disk failed.
[    1.331614] registered taskstats version 1
[    1.331932]   Magic number: 15:847:47
[    1.331991] rtc_cmos 00:04: setting system clock to 2011-02-21 22:02:24 UTC (1298325744)
[    1.331993] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.331994] EDD information not available.
[    1.332037] Freeing unused kernel memory: 828k freed
[    1.332223] Write protecting the kernel read-only data: 10240k
[    1.332328] Freeing unused kernel memory: 356k freed
[    1.332494] Freeing unused kernel memory: 1660k freed
[    1.343580] udev[108]: starting version 163
[    1.347417] md: linear personality registered for level -1
[    1.359561] md: multipath personality registered for level -4
[    1.380160] pata_jmicron 0000:07:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.380180] pata_jmicron 0000:07:00.1: BMDMA: failed to set dma mask, falling back to PIO
[    1.380190] pata_jmicron 0000:07:00.1: setting latency timer to 64
[    1.387508] md: raid0 personality registered for level 0
[    1.387784] scsi0 : pata_jmicron
[    1.393095] scsi1 : pata_jmicron
[    1.393136] ata1: PATA max PIO4 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 19
[    1.393138] ata2: PATA max PIO4 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 19
[    1.396300] Initializing USB Mass Storage driver...
[    1.396344] ahci 0000:00:11.0: version 3.0
[    1.396353] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.396401]   alloc irq_desc for 49 on node 0
[    1.396403]   alloc kstat_irqs on node 0
[    1.396413] ahci 0000:00:11.0: irq 49 for MSI/MSI-X
[    1.396495] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.396498] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.396774] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.396788] r8169 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.396812] r8169 0000:05:00.0: setting latency timer to 64
[    1.396840]   alloc irq_desc for 50 on node 0
[    1.396841]   alloc kstat_irqs on node 0
[    1.396848] r8169 0000:05:00.0: irq 50 for MSI/MSI-X
[    1.397179] r8169 0000:05:00.0: eth0: RTL8168d/8111d at 0xffffc90011094000, 6c:f0:49:ed:11:a3, XID 083000c0 IRQ 50
[    1.397485] md: raid1 personality registered for level 1
[    1.398857] scsi2 : usb-storage 1-2:1.0
[    1.398936] usbcore: registered new interface driver usb-storage
[    1.398938] USB Mass Storage support registered.
[    1.411276] usb 4-1: new high speed USB device using ehci_hcd and address 2
[    1.442039] pata_jmicron 0000:09:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.442062] pata_jmicron 0000:09:00.1: setting latency timer to 64
[    1.442100] firewire_ohci 0000:08:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.442148] scsi4 : pata_jmicron
[    1.442187] scsi3 : ahci
[    1.442223] scsi5 : pata_jmicron
[    1.442245] ata9: PATA max UDMA/100 cmd 0x6f00 ctl 0x6e00 bmdma 0x6b00 irq 17
[    1.442247] ata10: PATA max UDMA/100 cmd 0x6d00 ctl 0x6c00 bmdma 0x6b08 irq 17
[    1.442273] scsi6 : ahci
[    1.442412] scsi7 : ahci
[    1.442459] scsi8 : ahci
[    1.442500] scsi9 : ahci
[    1.442543] scsi10 : ahci
[    1.442651] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 49
[    1.442654] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 49
[    1.442657] ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 49
[    1.442660] ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 49
[    1.442662] ata7: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff300 irq 49
[    1.442665] ata8: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff380 irq 49
[    1.442770] ahci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.470057] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.470060] ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.470064] ahci 0000:07:00.0: setting latency timer to 64
[    1.470169] scsi11 : ahci
[    1.470220] scsi12 : ahci
[    1.470251] ata11: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 18
[    1.470254] ata12: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 18
[    1.470351] ahci 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.490047] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.490050] ahci 0000:09:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.490055] ahci 0000:09:00.0: setting latency timer to 64
[    1.490183] scsi13 : ahci
[    1.490241] scsi14 : ahci
[    1.490271] ata13: SATA max UDMA/133 abar m8192@0xfd1fe000 port 0xfd1fe100 irq 17
[    1.490275] ata14: SATA max UDMA/133 abar m8192@0xfd1fe000 port 0xfd1fe180 irq 17
[    1.510056] firewire_ohci: Added fw-ohci device 0000:08:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    1.621434] ata9.00: ATAPI: SONY    DVD RW DRU-510A, 1.1a, max UDMA/33
[    1.661327] ata9.00: configured for UDMA/33
[    1.722870] scsi 4:0:0:0: CD-ROM            SONY     DVD RW DRU-510A  1.1a PQ: 0 ANSI: 5
[    1.726953] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[    1.726956] Uniform CD-ROM driver Revision: 3.20
[    1.727037] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.727080] sr 4:0:0:0: Attached scsi generic sg0 type 5
[    1.790099] ata7: SATA link down (SStatus 0 SControl 300)
[    1.790660] ata6: SATA link down (SStatus 0 SControl 300)
[    1.791284] ata8: SATA link down (SStatus 0 SControl 300)
[    1.810036] ata11: SATA link down (SStatus 0 SControl 300)
[    1.811284] ata12: SATA link down (SStatus 0 SControl 300)
[    1.830043] ata14: SATA link down (SStatus 0 SControl 300)
[    1.830119] ata13: SATA link down (SStatus 0 SControl 300)
[    1.910023] usb 5-4: new low speed USB device using ohci_hcd and address 2
[    1.990039] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.000046] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.000065] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.000854] firewire_core: created device fw0: GUID 00eb9f22006cf049, S400
[    2.013810] ata3.00: ATA-7: WDC WD5000YS-01MPB1, 09.02E09, max UDMA/133
[    2.013813] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.014859] ata3.00: configured for UDMA/133
[    2.025199] ata5.00: ATA-7: WDC WD5000YS-01MPB1, 09.02E09, max UDMA/133
[    2.025201] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.026227] ata5.00: configured for UDMA/133
[    2.028720] ata4.00: ATA-7: WDC WD5000YS-01MPB1, 09.02E09, max UDMA/133
[    2.028722] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.029740] ata4.00: configured for UDMA/133
[    2.031352] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000YS-01M 09.0 PQ: 0 ANSI: 5
[    2.031454] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.031457] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    2.031544] sd 3:0:0:0: [sda] Write Protect is off
[    2.031547] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.031573] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.031806]  sda: sda1
[    2.037565] sd 3:0:0:0: [sda] Attached SCSI disk
[    2.041333] scsi 6:0:0:0: Direct-Access     ATA      WDC WD5000YS-01M 09.0 PQ: 0 ANSI: 5
[    2.041442] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.041481] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.041524] sd 6:0:0:0: [sdb] Write Protect is off
[    2.041527] scsi 7:0:0:0: Direct-Access     ATA      WDC WD5000YS-01M 09.0 PQ: 0 ANSI: 5
[    2.041530] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.041541] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.041642] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.041647] sd 7:0:0:0: Attached scsi generic sg3 type 0
[    2.041667]  sdb:
[    2.041748] sd 7:0:0:0: [sdc] Write Protect is off
[    2.041751] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.041772] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.042106]  sdc: sdb1
[    2.044142] sd 6:0:0:0: [sdb] Attached SCSI disk
[    2.048747]  sdc1
[    2.048922] sd 7:0:0:0: [sdc] Attached SCSI disk
[    2.051229] async_tx: api initialized (async)
[    2.112187] usbcore: registered new interface driver hiddev
[    2.112249] usbcore: registered new interface driver usbhid
[    2.112250] usbhid: USB HID core driver
[    2.118873] input: MLK Trust Deskset 16593 as /devices/pci0000:00/0000:00:12.0/usb5/5-4/5-4:1.0/input/input2
[    2.118932] sunplus 0003:04FC:05D8.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK Trust Deskset 16593] on usb-0000:00:12.0-4/input0
[    2.126736] sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor
[    2.127183] input: MLK Trust Deskset 16593 as /devices/pci0000:00/0000:00:12.0/usb5/5-4/5-4:1.1/input/input3
[    2.127269] sunplus 0003:04FC:05D8.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [MLK Trust Deskset 16593] on usb-0000:00:12.0-4/input1
[    2.221274] raid6: int64x1   2392 MB/s
[    2.391262] raid6: int64x2   3293 MB/s
[    2.401421] scsi 2:0:0:0: Direct-Access     Corsair  Flash Voyager    1100 PQ: 0 ANSI: 0 CCS
[    2.401796] sd 2:0:0:0: Attached scsi generic sg4 type 0
[    2.403156] sd 2:0:0:0: [sdd] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[    2.403786] sd 2:0:0:0: [sdd] Write Protect is off
[    2.403789] sd 2:0:0:0: [sdd] Mode Sense: 43 00 00 00
[    2.403791] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[    2.406037] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[    2.406041]  sdd: sdd1
[    2.407829] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[    2.407832] sd 2:0:0:0: [sdd] Attached SCSI removable disk
[    2.561266] raid6: int64x4   2522 MB/s
[    2.731267] raid6: int64x8   2198 MB/s
[    2.901274] raid6: sse2x1    3972 MB/s
[    3.071260] raid6: sse2x2    6696 MB/s
[    3.241265] raid6: sse2x4    7532 MB/s
[    3.241266] raid6: using algorithm sse2x4 (7532 MB/s)
[    3.242169] xor: automatically using best checksumming function: generic_sse
[    3.291260]    generic_sse: 11548.400 MB/sec
[    3.291261] xor: using function: generic_sse (11548.400 MB/sec)
[    3.292303] md: bind<sdb1>
[    3.294656] md: raid6 personality registered for level 6
[    3.294658] md: raid5 personality registered for level 5
[    3.294659] md: raid4 personality registered for level 4
[    3.298791] md: raid10 personality registered for level 10
[    3.492645] md: bind<sdc1>
[    3.692847] md: bind<sda1>
[    3.694308] md/raid:md0: device sda1 operational as raid disk 0
[    3.694310] md/raid:md0: device sdc1 operational as raid disk 2
[    3.694312] md/raid:md0: device sdb1 operational as raid disk 1
[    3.694574] md/raid:md0: allocated 3230kB
[    3.694598] md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2
[    3.694600] RAID conf printout:
[    3.694601]  --- level:5 rd:3 wd:3
[    3.694602]  disk 0, o:1, dev:sda1
[    3.694603]  disk 1, o:1, dev:sdb1
[    3.694604]  disk 2, o:1, dev:sdc1
[    3.694622] md0: detected capacity change from 0 to 1000210300928
[    3.695335]  md0: unknown partition table
[    4.042298] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[    5.814685] Adding 7811068k swap on /dev/mapper/vg_main-lv_swap.  Priority:-1 extents:1 across:7811068k
[    5.984942] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[    6.100890] udev[512]: starting version 163
[    6.395651] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.395706] xhci_hcd 0000:02:00.0: setting latency timer to 64
[    6.395709] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    6.395763] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 11
[    6.395877] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfd9fe000
[    6.399239] usb usb11: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
[    6.399300] xHCI xhci_add_endpoint called for root hub
[    6.399302] xHCI xhci_check_bandwidth called for root hub
[    6.399324] hub 11-0:1.0: USB hub found
[    6.399327] hub 11-0:1.0: 4 ports detected
[    6.486466] lp: driver loaded but no devices found
[    6.549700] EDAC MC: Ver: 2.1.0 Feb 19 2011
[    6.550001] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [irq 2816-2831]
[    6.550009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.552096] EDAC amd64_edac:  Ver: 3.3.0 Feb 19 2011
[    6.552291] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[    6.552297] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    6.552298]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    6.552300]  (Note that use of the override may cause unknown side effects.)
[    6.552315] amd64_edac: probe of 0000:00:18.2 failed with error -22
[    6.628981] [drm] Initialized drm 1.1.0 20060810
[    6.721370] dib0700: loaded with support for 14 different device-types
[    6.721481] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[    6.721511] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    6.721661] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[    6.735942] ata4.00: exception Emask 0x10 SAct 0x20009 SErr 0x280100 action 0x6 frozen
[    6.735980] ata4.00: irq_stat 0x08000000, interface fatal error
[    6.736014] ata4: SError: { UnrecovData 10B8B BadCRC }
[    6.736048] ata4.00: failed command: READ FPDMA QUEUED
[    6.736082] ata4.00: cmd 60/08:00:3f:31:37/00:00:0b:00:00/40 tag 0 ncq 4096 in
[    6.736083]          res 40/00:1c:3f:52:79/00:00:1d:00:00/40 Emask 0x10 (ATA bus error)
[    6.736149] ata4.00: status: { DRDY }
[    6.736181] ata4.00: failed command: READ FPDMA QUEUED
[    6.736215] ata4.00: cmd 60/80:18:3f:52:79/00:00:1d:00:00/40 tag 3 ncq 65536 in
[    6.736216]          res 40/00:1c:3f:52:79/00:00:1d:00:00/40 Emask 0x10 (ATA bus error)
[    6.736285] ata4.00: status: { DRDY }
[    6.736316] ata4.00: failed command: READ FPDMA QUEUED
[    6.736352] ata4.00: cmd 60/08:88:80:5f:38/00:00:3a:00:00/40 tag 17 ncq 4096 in
[    6.736352]          res 40/00:1c:3f:52:79/00:00:1d:00:00/40 Emask 0x10 (ATA bus error)
[    6.736417] ata4.00: status: { DRDY }
[    6.736451] ata4: hard resetting link
[    6.738879] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.847770] DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)...
[    7.280656] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.294490] ata4.00: configured for UDMA/133
[    7.294502] ata4: EH complete
[    7.336552] hda_codec: ALC889: BIOS auto-probing.
[    7.347958] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    7.348013]   alloc irq_desc for 51 on node 0
[    7.348015]   alloc kstat_irqs on node 0
[    7.348024] HDA Intel 0000:01:00.1: irq 51 for MSI/MSI-X
[    7.348042] HDA Intel 0000:01:00.1: setting latency timer to 64
[    7.386593] MT2060: successfully identified (IF1 = 1239)
[    7.402935] [drm] radeon defaulting to kernel modesetting.
[    7.402938] [drm] radeon kernel modesetting enabled.
[    7.403159] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.403163] radeon 0000:01:00.0: setting latency timer to 64
[    7.404594] [drm] initializing kernel modesetting (RV710 0x1002:0x954F).
[    7.404722] [drm] register mmio base: 0xFDAE0000
[    7.404724] [drm] register mmio size: 65536
[    7.405045] ATOM BIOS:
[    7.405058] [drm] Clocks initialized !
[    7.405067] radeon 0000:01:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used)
[    7.405069] radeon 0000:01:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF
[    7.406779] [drm] Detected VRAM RAM=512M, BAR=256M
[    7.406783] [drm] RAM width 64bits DDR
[    7.406856] [TTM] Zone  kernel: Available graphics memory: 1961372 kiB.
[    7.406858] [TTM] Initializing pool allocator.
[    7.406876] [drm] radeon: 512M of VRAM memory ready
[    7.406877] [drm] radeon: 512M of GTT memory ready.
[    7.406922]   alloc irq_desc for 52 on node 0
[    7.406923]   alloc kstat_irqs on node 0
[    7.406933] radeon 0000:01:00.0: irq 52 for MSI/MSI-X
[    7.406937] radeon 0000:01:00.0: radeon: using MSI.
[    7.406965] [drm] radeon: irq initialized.
[    7.406968] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    7.407575] [drm] Loading RV710 Microcode
[    7.598011] [drm] ring test succeeded in 1 usecs
[    7.598151] [drm] radeon: ib pool ready.
[    7.598211] [drm] ib test succeeded in 0 usecs
[    7.598213] [drm] Enabling audio support
[    7.598219] failed to evaluate ATIF got AE_BAD_PARAMETER
[    7.598221] radeon 0000:01:00.0: Error during ACPI methods call
[    7.598273] [drm] Default TV standard: PAL
[    7.598360] [drm] Default TV standard: PAL
[    7.598387] [drm] Radeon Display Connectors
[    7.598389] [drm] Connector 0:
[    7.598390] [drm]   VGA
[    7.598391] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    7.598393] [drm]   Encoders:
[    7.598394] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    7.598395] [drm] Connector 1:
[    7.598396] [drm]   HDMI-A
[    7.598397] [drm]   HPD1
[    7.598399] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    7.598400] [drm]   Encoders:
[    7.598401] [drm]     DFP1: INTERNAL_UNIPHY
[    7.598403] [drm] Connector 2:
[    7.598403] [drm]   DVI-I
[    7.598404] [drm]   HPD4
[    7.598406] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[    7.598407] [drm]   Encoders:
[    7.598408] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    7.598410] [drm]     DFP2: INTERNAL_UNIPHY2
[    7.655732] [drm] Internal thermal controller with fan control
[    7.655741] [drm] radeon: power management initialized
[    7.742537] [drm] fb mappable at 0xD0142000
[    7.742538] [drm] vram apper at 0xD0000000
[    7.742540] [drm] size 5300224
[    7.742541] [drm] fb depth is 24
[    7.742542] [drm]    pitch is 5888
[    7.973823] Console: switching to colour frame buffer device 180x56
[    7.977477] fb0: radeondrmfb frame buffer device
[    7.977478] drm: registered panic notifier
[    7.977481] Slow work thread pool: Starting up
[    7.977517] Slow work thread pool: Ready
[    7.977522] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[    7.987301] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    7.987466] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[    7.993040] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)...
[    7.997804] MT2060: successfully identified (IF1 = 1221)
[    8.081931] type=1400 audit(1298325751.243:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=810 comm="apparmor_parser"
[    8.081942] type=1400 audit(1298325751.243:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=832 comm="apparmor_parser"
[    8.082139] type=1400 audit(1298325751.243:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=810 comm="apparmor_parser"
[    8.082154] type=1400 audit(1298325751.243:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=832 comm="apparmor_parser"
[    8.082256] type=1400 audit(1298325751.243:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=810 comm="apparmor_parser"
[    8.082274] type=1400 audit(1298325751.243:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=832 comm="apparmor_parser"
[    8.409571] r8169 0000:05:00.0: eth0: link up
[    8.409577] r8169 0000:05:00.0: eth0: link up
[    8.620058] type=1400 audit(1298325751.773:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1035 comm="apparmor_parser"
[    8.620206] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.4/0000:08:06.2/usb4/4-1/input/input4
[    8.620255] dvb-usb: schedule remote query interval to 50 msecs.
[    8.620258] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
[    8.620266] type=1400 audit(1298325751.773:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1035 comm="apparmor_parser"
[    8.620384] type=1400 audit(1298325751.773:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1035 comm="apparmor_parser"
[    8.620634] dib0700: rc submit urb failed
[    8.620635]
[    8.620694] usbcore: registered new interface driver dvb_usb_dib0700
[    8.652882] type=1400 audit(1298325751.813:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1037 comm="apparmor_parser"
[    9.010359] kvm: Nested Virtualization enabled
[    9.010364] kvm: Nested Paging enabled
[    9.538981] Bridge firewalling registered
[    9.671541] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.767869] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    9.768012] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    9.768013] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    9.768015] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   10.434874] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.742498] lo: Disabled Privacy Extensions
[   18.930089] eth0: no IPv6 routers present
[  984.054595] uhci_hcd 0000:08:06.0: remove, state 4
[  984.054610] usb usb9: USB disconnect, address 1
[  984.054889] uhci_hcd 0000:08:06.0: USB bus 9 deregistered
[  984.054971] uhci_hcd 0000:08:06.0: PCI INT A disabled
[  984.055429] pci-stub 0000:08:06.0: claimed by stub
[  984.062020] uhci_hcd 0000:08:06.1: remove, state 4
[  984.062032] usb usb10: USB disconnect, address 1
[  984.062291] uhci_hcd 0000:08:06.1: USB bus 10 deregistered
[  984.062369] uhci_hcd 0000:08:06.1: PCI INT B disabled
[  984.062526] pci-stub 0000:08:06.1: claimed by stub
[  984.068868] ehci_hcd 0000:08:06.2: remove, state 1
[  984.068879] usb usb4: USB disconnect, address 1
[  984.068884] usb 4-1: USB disconnect, address 2
[  984.121595] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully deinitialized and disconnected.
[  984.122393] ehci_hcd 0000:08:06.2: USB bus 4 deregistered
[  984.122538] ehci_hcd 0000:08:06.2: PCI INT C disabled
[  984.125740] pci-stub 0000:08:06.2: claimed by stub
[  984.346764] audit_printk_skb: 6 callbacks suppressed
[  984.346766] type=1400 audit(1298326726.357:14): apparmor="STATUS" operation="profile_load" name="libvirt-cba8a555-ffb3-4271-8a68-afef6a33de61" pid=1445 comm="apparmor_parser"
[ 1936.019571] type=1400 audit(1298327678.027:15): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=1786 comm="apparmor_parser"
[ 1936.423849] device vnet0 entered promiscuous mode
[ 1936.423895] virbr0: new device vnet0 does not support netpoll (disabling)
[ 1936.425157] virbr0: topology change detected, propagating
[ 1936.425166] virbr0: port 1(vnet0) entering forwarding state
[ 1936.425172] virbr0: port 1(vnet0) entering forwarding state
[ 1947.000650] vnet0: no IPv6 routers present
[ 1948.691702] type=1400 audit(1298327690.707:16): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=1851 comm="apparmor_parser"
[ 1948.822597] virbr0: port 1(vnet0) entering forwarding state
[ 1948.901362] device vnet0 left promiscuous mode
[ 1948.901372] virbr0: port 1(vnet0) entering disabled state
[ 2008.352822] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 2008.354508] pci-stub 0000:00:14.2: claimed by stub
[ 2012.149537] pci-stub 0000:00:14.2: claimed by stub
[ 2012.260620] type=1400 audit(1298327754.277:17): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=1898 comm="apparmor_parser"
[ 2012.614385] device vnet0 entered promiscuous mode
[ 2012.615687] virbr0: topology change detected, propagating
[ 2012.615697] virbr0: port 1(vnet0) entering forwarding state
[ 2012.615703] virbr0: port 1(vnet0) entering forwarding state
[ 2012.770432] pci-stub 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2012.810061] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2012.810085] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2012.810096] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2012.810107] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2013.038049] assign device 0:0:14.2
[ 2023.310033] vnet0: no IPv6 routers present
[ 2090.680876] type=1400 audit(1298327832.697:18): apparmor="STATUS" operation="profile_replace" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=1976 comm="apparmor_parser"
[ 2090.750232] type=1400 audit(1298327832.767:19): apparmor="STATUS" operation="profile_replace" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=1978 comm="apparmor_parser"
[ 2108.509607] type=1400 audit(1298327850.517:20): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=1982 comm="apparmor_parser"
[ 2108.520688] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2108.520725] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2108.520736] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2108.520747] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2108.520770] pci-stub 0000:00:14.2: PCI INT A disabled
[ 2108.541860] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2108.640203] hda_codec: ALC889: BIOS auto-probing.
[ 2108.783214] virbr0: port 1(vnet0) entering forwarding state
[ 2108.841399] device vnet0 left promiscuous mode
[ 2108.841408] virbr0: port 1(vnet0) entering disabled state
[ 2111.562726] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 2111.562932] pci-stub 0000:00:14.2: claimed by stub
[ 2111.692473] type=1400 audit(1298327853.707:21): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=1996 comm="apparmor_parser"
[ 2112.024399] device vnet0 entered promiscuous mode
[ 2112.025701] virbr0: topology change detected, propagating
[ 2112.025710] virbr0: port 1(vnet0) entering forwarding state
[ 2112.025715] virbr0: port 1(vnet0) entering forwarding state
[ 2112.151554] pci-stub 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2112.190062] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2112.190087] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2112.190098] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2112.190109] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2112.414646] assign device 0:0:14.2
[ 2122.260034] vnet0: no IPv6 routers present
[ 2147.190623] type=1400 audit(1298327889.207:22): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2038 comm="apparmor_parser"
[ 2147.200719] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2147.200752] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2147.200765] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2147.200776] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2147.200798] pci-stub 0000:00:14.2: PCI INT A disabled
[ 2147.221874] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2147.320207] hda_codec: ALC889: BIOS auto-probing.
[ 2147.443233] virbr0: port 1(vnet0) entering forwarding state
[ 2147.471367] device vnet0 left promiscuous mode
[ 2147.471376] virbr0: port 1(vnet0) entering disabled state
[ 2148.425493] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 2148.425718] pci-stub 0000:00:14.2: claimed by stub
[ 2148.532049] type=1400 audit(1298327890.547:23): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2052 comm="apparmor_parser"
[ 2148.904399] device vnet0 entered promiscuous mode
[ 2148.905701] virbr0: topology change detected, propagating
[ 2148.905710] virbr0: port 1(vnet0) entering forwarding state
[ 2148.905716] virbr0: port 1(vnet0) entering forwarding state
[ 2149.033762] pci-stub 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2149.070060] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2149.070084] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2149.070094] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2149.070105] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2149.294664] assign device 0:0:14.2
[ 2159.020030] vnet0: no IPv6 routers present
[ 2188.501327] type=1400 audit(1298327930.517:24): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2094 comm="apparmor_parser"
[ 2188.511330] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2188.511361] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2188.511373] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2188.511384] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2188.511408] pci-stub 0000:00:14.2: PCI INT A disabled
[ 2188.532487] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2188.740196] hda_codec: ALC889: BIOS auto-probing.
[ 2188.812614] virbr0: port 1(vnet0) entering forwarding state
[ 2188.851364] device vnet0 left promiscuous mode
[ 2188.851374] virbr0: port 1(vnet0) entering disabled state
[ 2189.857008] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 2189.857194] pci-stub 0000:00:14.2: claimed by stub
[ 2189.962190] type=1400 audit(1298327931.977:25): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2107 comm="apparmor_parser"
[ 2190.373800] device vnet0 entered promiscuous mode
[ 2190.375103] virbr0: topology change detected, propagating
[ 2190.375112] virbr0: port 1(vnet0) entering forwarding state
[ 2190.375118] virbr0: port 1(vnet0) entering forwarding state
[ 2190.494173] pci-stub 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2190.530688] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2190.530712] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2190.530723] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2190.530734] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2190.755379] assign device 0:0:14.2
[ 2201.240650] vnet0: no IPv6 routers present
[ 2223.893673] type=1400 audit(1298327965.907:26): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2149 comm="apparmor_parser"
[ 2223.920717] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2223.920753] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2223.920766] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2223.920777] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2223.920799] pci-stub 0000:00:14.2: PCI INT A disabled
[ 2223.941865] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2224.040226] hda_codec: ALC889: BIOS auto-probing.
[ 2224.173229] virbr0: port 1(vnet0) entering forwarding state
[ 2224.201361] device vnet0 left promiscuous mode
[ 2224.201371] virbr0: port 1(vnet0) entering disabled state
[ 2226.816734] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 2226.816937] pci-stub 0000:00:14.2: claimed by stub
[ 2226.922454] type=1400 audit(1298327968.937:27): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2163 comm="apparmor_parser"
[ 2227.254394] device vnet0 entered promiscuous mode
[ 2227.255697] virbr0: topology change detected, propagating
[ 2227.255707] virbr0: port 1(vnet0) entering forwarding state
[ 2227.255713] virbr0: port 1(vnet0) entering forwarding state
[ 2227.383761] pci-stub 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2227.420060] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2227.420084] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2227.420094] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2227.420106] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2227.644567] assign device 0:0:14.2
[ 2238.170020] vnet0: no IPv6 routers present
[ 2245.283174] type=1400 audit(1298327987.297:28): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2205 comm="apparmor_parser"
[ 2245.310692] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2245.310728] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2245.310739] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2245.310750] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2245.310773] pci-stub 0000:00:14.2: PCI INT A disabled
[ 2245.331844] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2245.430203] hda_codec: ALC889: BIOS auto-probing.
[ 2245.573235] virbr0: port 1(vnet0) entering forwarding state
[ 2245.631399] device vnet0 left promiscuous mode
[ 2245.631409] virbr0: port 1(vnet0) entering disabled state
[ 2316.378205] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 2316.378544] pci-stub 0000:00:14.2: claimed by stub
[ 2316.482757] type=1400 audit(1298328058.497:29): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2234 comm="apparmor_parser"
[ 2316.863801] device vnet0 entered promiscuous mode
[ 2316.865103] virbr0: topology change detected, propagating
[ 2316.865112] virbr0: port 1(vnet0) entering forwarding state
[ 2316.865118] virbr0: port 1(vnet0) entering forwarding state
[ 2316.984035] pci-stub 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2317.020060] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2317.020084] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2317.020095] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2317.020106] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2317.244666] assign device 0:0:14.2
[ 2327.680650] vnet0: no IPv6 routers present
[ 2366.151316] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 2366.151341] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 2366.151352] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 2366.151363] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 2366.151386] pci-stub 0000:00:14.2: PCI INT A disabled
[ 2366.151412] type=1400 audit(1298328108.167:30): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2276 comm="apparmor_parser"
[ 2366.173347] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2366.270203] hda_codec: ALC889: BIOS auto-probing.
[ 2366.403838] virbr0: port 1(vnet0) entering forwarding state
[ 2366.430740] device vnet0 left promiscuous mode
[ 2366.430750] virbr0: port 1(vnet0) entering disabled state
[ 3156.648462] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 3156.648689] pci-stub 0000:00:14.2: claimed by stub
[ 3156.753111] type=1400 audit(1298328898.767:31): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2340 comm="apparmor_parser"
[ 3157.213788] device vnet0 entered promiscuous mode
[ 3157.215092] virbr0: topology change detected, propagating
[ 3157.215101] virbr0: port 1(vnet0) entering forwarding state
[ 3157.215107] virbr0: port 1(vnet0) entering forwarding state
[ 3157.324151] pci-stub 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3157.360115] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 3157.360139] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 3157.360149] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 3157.360160] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 3157.590719] assign device 0:0:14.2
[ 3168.210640] vnet0: no IPv6 routers present
[ 4294.023547] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x280100 action 0x6 frozen
[ 4294.023682] ata4.00: irq_stat 0x08000000, interface fatal error
[ 4294.023782] ata4: SError: { UnrecovData 10B8B BadCRC }
[ 4294.023869] ata4.00: failed command: READ FPDMA QUEUED
[ 4294.023963] ata4.00: cmd 60/90:00:e7:05:00/00:00:00:00:00/40 tag 0 ncq 73728 in
[ 4294.023966]          res 40/00:04:e7:05:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 4294.024206] ata4.00: status: { DRDY }
[ 4294.024271] ata4: hard resetting link
[ 4294.570261] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4294.598544] ata4.00: configured for UDMA/133
[ 4294.598570] ata4: EH complete
[ 4815.732045] type=1400 audit(1298330557.747:32): apparmor="STATUS" operation="profile_replace" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2611 comm="apparmor_parser"
[ 4844.201437] type=1400 audit(1298330586.217:33): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2633 comm="apparmor_parser"
[ 4844.230069] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 4844.230102] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 4844.230115] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 4844.230126] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 4844.230150] pci-stub 0000:00:14.2: PCI INT A disabled
[ 4844.251192] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4844.450193] hda_codec: ALC889: BIOS auto-probing.
[ 4844.462711] virbr0: port 1(vnet0) entering forwarding state
[ 4844.500769] device vnet0 left promiscuous mode
[ 4844.500779] virbr0: port 1(vnet0) entering disabled state
[ 4846.305969] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 4846.306417] pci-stub 0000:00:14.2: claimed by stub
[ 4846.420678] type=1400 audit(1298330588.427:34): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2647 comm="apparmor_parser"
[ 4846.803717] device vnet0 entered promiscuous mode
[ 4846.805019] virbr0: topology change detected, propagating
[ 4846.805028] virbr0: port 1(vnet0) entering forwarding state
[ 4846.805034] virbr0: port 1(vnet0) entering forwarding state
[ 4846.921504] pci-stub 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4846.960117] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 4846.960142] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 4846.960152] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 4846.960163] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 4847.187650] assign device 0:0:14.2
[ 4856.880142] vnet0: no IPv6 routers present
[ 4905.413239] virbr0: port 1(vnet0) entering forwarding state
[ 4905.451367] device vnet0 left promiscuous mode
[ 4905.451377] virbr0: port 1(vnet0) entering disabled state
[ 4905.570688] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 4905.570713] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 4905.570724] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 4905.570736] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 4905.570759] pci-stub 0000:00:14.2: PCI INT A disabled
[ 4906.030398] type=1400 audit(1298330648.037:35): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2739 comm="apparmor_parser"
[ 4906.052257] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4906.170210] hda_codec: ALC889: BIOS auto-probing.
[ 4994.312806] pci-stub 0000:00:14.3: claimed by stub
[ 4994.313049] pci-stub 0000:00:14.3: claimed by stub
[ 4998.922534] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 4998.923265] pci-stub 0000:00:14.2: claimed by stub
[ 4998.928610] pci-stub 0000:00:14.3: claimed by stub
[ 5061.520293] pci-stub 0000:00:14.4: claimed by stub
[ 5061.520535] pci-stub 0000:00:14.4: claimed by stub
[ 5063.507135] pci-stub 0000:00:14.2: claimed by stub
[ 5063.511802] pci-stub 0000:00:14.3: claimed by stub
[ 5063.516545] pci-stub 0000:00:14.4: claimed by stub
[ 5082.621755] pci-stub 0000:00:14.4: claimed by stub
[ 5088.444219] pci-stub 0000:00:14.2: claimed by stub
[ 5088.448972] pci-stub 0000:00:14.3: claimed by stub
[ 5088.453634] pci-stub 0000:00:14.4: claimed by stub
[ 5131.735703] pci-stub 0000:00:14.2: claimed by stub
[ 5131.840071] type=1400 audit(1298330873.857:36): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2783 comm="apparmor_parser"
[ 5132.303699] device vnet0 entered promiscuous mode
[ 5132.305004] virbr0: topology change detected, propagating
[ 5132.305013] virbr0: port 1(vnet0) entering forwarding state
[ 5132.305019] virbr0: port 1(vnet0) entering forwarding state
[ 5132.424354] pci-stub 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5132.460060] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 5132.460084] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 5132.460095] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 5132.460106] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 5132.687860] assign device 0:0:14.2
[ 5142.940033] vnet0: no IPv6 routers present
[ 5171.613869] virbr0: port 1(vnet0) entering forwarding state
[ 5171.650744] device vnet0 left promiscuous mode
[ 5171.650754] virbr0: port 1(vnet0) entering disabled state
[ 5171.790714] pci-stub 0000:00:14.2: restoring config space at offset 0xf (was 0x0, writing 0x7)
[ 5171.790739] pci-stub 0000:00:14.2: restoring config space at offset 0x4 (was 0x4, writing 0xfdff4004)
[ 5171.790750] pci-stub 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010)
[ 5171.790761] pci-stub 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100002)
[ 5171.790783] pci-stub 0000:00:14.2: PCI INT A disabled
[ 5172.251059] type=1400 audit(1298330914.267:37): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=2859 comm="apparmor_parser"
[ 5172.272892] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5172.390183] hda_codec: ALC889: BIOS auto-probing.
[ 5232.519159] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 5232.519982] pci-stub 0000:00:14.2: claimed by stub
[ 5232.524996] pci-stub 0000:00:14.3: claimed by stub
[ 5354.850382] pci-stub 0000:08:06.1: claimed by stub
[ 5600.177713] pci-stub 0000:08:06.1: claimed by stub
[ 5616.543142] pci-stub 0000:08:06.1: claimed by stub
[ 5628.308415] pci-stub 0000:00:14.2: claimed by stub
[ 5628.313052] pci-stub 0000:00:14.3: claimed by stub
[ 5628.319778] pci-stub 0000:08:06.1: claimed by stub
[ 5668.061734] pci-stub 0000:00:14.2: claimed by stub
[ 5668.066318] pci-stub 0000:00:14.3: claimed by stub
[ 5668.072004] pci-stub 0000:08:06.1: claimed by stub
[ 5686.010258] lo: Disabled Privacy Extensions
[ 5706.441584] pci-stub 0000:08:06.0: claimed by stub
[ 5712.683671] pci-stub 0000:08:06.1: claimed by stub
[ 5719.263437] pci-stub 0000:08:06.2: claimed by stub
[ 5721.538935] pci-stub 0000:08:06.0: claimed by stub
[ 5721.545743] pci-stub 0000:08:06.1: claimed by stub
[ 5721.551866] pci-stub 0000:08:06.2: claimed by stub
[ 5721.725550] type=1400 audit(1298331463.737:38): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=3157 comm="apparmor_parser"
[ 5722.095107] device vnet0 entered promiscuous mode
[ 5722.096413] virbr0: topology change detected, propagating
[ 5722.096422] virbr0: port 1(vnet0) entering forwarding state
[ 5722.096428] virbr0: port 1(vnet0) entering forwarding state
[ 5722.221356] pci-stub 0000:08:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5722.260083] pci-stub 0000:08:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[ 5722.488348] assign device 0:8:6.0
[ 5722.488382] type=1400 audit(1298331464.497:39): apparmor="DENIED" operation="capable" parent=1 profile="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=3166 comm="kvm" capability=17  capname="sys_rawio"
[ 5722.488426] deassign device 0:8:6.0
[ 5722.520085] pci-stub 0000:08:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[ 5722.520112] pci-stub 0000:08:06.0: PCI INT A disabled
[ 5722.697620] type=1400 audit(1298331464.707:40): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=3181 comm="apparmor_parser"
[ 5722.760709] uhci_hcd 0000:08:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5722.760727] uhci_hcd 0000:08:06.0: UHCI Host Controller
[ 5722.760854] uhci_hcd 0000:08:06.0: new USB bus registered, assigned bus number 4
[ 5722.760902] uhci_hcd 0000:08:06.0: irq 20, io base 0x00007f00
[ 5722.761940] hub 4-0:1.0: USB hub found
[ 5722.761955] hub 4-0:1.0: 2 ports detected
[ 5722.762801] uhci_hcd 0000:08:06.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5722.762816] uhci_hcd 0000:08:06.1: UHCI Host Controller
[ 5722.762916] uhci_hcd 0000:08:06.1: new USB bus registered, assigned bus number 9
[ 5722.762959] uhci_hcd 0000:08:06.1: irq 21, io base 0x00007e00
[ 5722.763659] hub 9-0:1.0: USB hub found
[ 5722.763670] hub 9-0:1.0: 2 ports detected
[ 5722.764864] ehci_hcd 0000:08:06.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 5722.765025] ehci_hcd 0000:08:06.2: EHCI Host Controller
[ 5722.765131] ehci_hcd 0000:08:06.2: new USB bus registered, assigned bus number 10
[ 5722.765200] ehci_hcd 0000:08:06.2: irq 22, io mem 0xfd4ff000
[ 5722.780720] ehci_hcd 0000:08:06.2: USB 2.0 started, EHCI 1.00
[ 5722.780990] hub 10-0:1.0: USB hub found
[ 5722.781001] hub 10-0:1.0: 4 ports detected
[ 5722.863199] virbr0: port 1(vnet0) entering forwarding state
[ 5722.891362] device vnet0 left promiscuous mode
[ 5722.891372] virbr0: port 1(vnet0) entering disabled state
[ 5723.100074] usb 10-1: new high speed USB device using ehci_hcd and address 2
[ 5723.252894] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[ 5723.252960] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 5723.253161] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 5723.377715] DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)...
[ 5723.381565] MT2060: successfully identified (IF1 = 1239)
[ 5723.966890] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 5723.967144] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 5723.973394] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)...
[ 5723.978268] MT2060: successfully identified (IF1 = 1221)
[ 5724.569114] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.4/0000:08:06.2/usb10/10-1/input/input5
[ 5724.569198] dvb-usb: schedule remote query interval to 50 msecs.
[ 5724.569206] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
[ 5724.569495] dib0700: rc submit urb failed
[ 5724.569500]
[ 5805.356773] uhci_hcd 0000:08:06.0: remove, state 4
[ 5805.356789] usb usb4: USB disconnect, address 1
[ 5805.357064] uhci_hcd 0000:08:06.0: USB bus 4 deregistered
[ 5805.357145] uhci_hcd 0000:08:06.0: PCI INT A disabled
[ 5805.364371] uhci_hcd 0000:08:06.1: remove, state 4
[ 5805.364383] usb usb9: USB disconnect, address 1
[ 5805.364614] uhci_hcd 0000:08:06.1: USB bus 9 deregistered
[ 5805.364687] uhci_hcd 0000:08:06.1: PCI INT B disabled
[ 5805.371214] ehci_hcd 0000:08:06.2: remove, state 1
[ 5805.371218] usb usb10: USB disconnect, address 1
[ 5805.371220] usb 10-1: USB disconnect, address 2
[ 5805.511633] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully deinitialized and disconnected.
[ 5805.512525] ehci_hcd 0000:08:06.2: USB bus 10 deregistered
[ 5805.512670] ehci_hcd 0000:08:06.2: PCI INT C disabled
[ 5805.521055] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0000 address=0x000000000000c020 flags=0x0070]
[ 5805.521067] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0000 address=0x000000000000c030 flags=0x0070]
[ 5805.521076] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0000 address=0x000000000000c000 flags=0x0070]
[ 5805.521224] firewire_ohci 0000:08:0e.0: PCI INT A disabled
[ 5805.521230] firewire_ohci: Removed fw-ohci device.
[ 5812.092791] pci-stub 0000:08:06.0: claimed by stub
[ 5812.092861] pci-stub 0000:08:06.1: claimed by stub
[ 5812.093107] pci-stub 0000:08:06.0: claimed by stub
[ 5812.099889] pci-stub 0000:08:06.1: claimed by stub
[ 5812.102623] pci-stub 0000:08:06.2: claimed by stub
[ 5812.102723] pci-stub 0000:08:06.2: claimed by stub
[ 5812.265948] type=1400 audit(1298331554.277:41): apparmor="STATUS" operation="profile_load" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=3227 comm="apparmor_parser"
[ 5812.653784] device vnet0 entered promiscuous mode
[ 5812.655088] virbr0: topology change detected, propagating
[ 5812.655097] virbr0: port 1(vnet0) entering forwarding state
[ 5812.655103] virbr0: port 1(vnet0) entering forwarding state
[ 5812.781203] pci-stub 0000:08:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5812.820087] pci-stub 0000:08:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[ 5813.048427] assign device 0:8:6.0
[ 5813.048463] type=1400 audit(1298331555.057:42): apparmor="DENIED" operation="capable" parent=1 profile="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=3236 comm="kvm" capability=17  capname="sys_rawio"
[ 5813.048505] deassign device 0:8:6.0
[ 5813.080089] pci-stub 0000:08:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[ 5813.080116] pci-stub 0000:08:06.0: PCI INT A disabled
[ 5813.277511] type=1400 audit(1298331555.287:43): apparmor="STATUS" operation="profile_remove" name="libvirt-307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc" pid=3251 comm="apparmor_parser"
[ 5813.340516] uhci_hcd 0000:08:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5813.340534] uhci_hcd 0000:08:06.0: UHCI Host Controller
[ 5813.340660] uhci_hcd 0000:08:06.0: new USB bus registered, assigned bus number 4
[ 5813.340708] uhci_hcd 0000:08:06.0: irq 20, io base 0x00007f00
[ 5813.340717] uhci_hcd 0000:08:06.0: unable to allocate consistent memory for frame list
[ 5813.340858] uhci_hcd 0000:08:06.0: startup error -16
[ 5813.340950] uhci_hcd 0000:08:06.0: USB bus 4 deregistered
[ 5813.341044] uhci_hcd 0000:08:06.0: PCI INT A disabled
[ 5813.341049] uhci_hcd 0000:08:06.0: init 0000:08:06.0 fail, -16
[ 5813.341286] uhci_hcd: probe of 0000:08:06.0 failed with error -16
[ 5813.342258] uhci_hcd 0000:08:06.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5813.342272] uhci_hcd 0000:08:06.1: UHCI Host Controller
[ 5813.342369] uhci_hcd 0000:08:06.1: new USB bus registered, assigned bus number 4
[ 5813.342412] uhci_hcd 0000:08:06.1: irq 21, io base 0x00007e00
[ 5813.342697] hub 4-0:1.0: USB hub found
[ 5813.342707] hub 4-0:1.0: 2 ports detected
[ 5813.343683] ehci_hcd 0000:08:06.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 5813.343879] ehci_hcd 0000:08:06.2: EHCI Host Controller
[ 5813.343988] ehci_hcd 0000:08:06.2: new USB bus registered, assigned bus number 9
[ 5813.344067] ehci_hcd 0000:08:06.2: irq 22, io mem 0xfd4ff000
[ 5813.360056] ehci_hcd 0000:08:06.2: USB 2.0 started, EHCI 1.00
[ 5813.360321] hub 9-0:1.0: USB hub found
[ 5813.360332] hub 9-0:1.0: 4 ports detected
[ 5813.523211] virbr0: port 1(vnet0) entering forwarding state
[ 5813.561366] device vnet0 left promiscuous mode
[ 5813.561376] virbr0: port 1(vnet0) entering disabled state
[ 5813.680073] usb 9-1: new high speed USB device using ehci_hcd and address 2
[ 5813.832885] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[ 5813.832952] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 5813.833154] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 5813.958207] DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)...
[ 5813.962056] MT2060: successfully identified (IF1 = 1239)
[ 5814.547007] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 5814.547268] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 5814.553513] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)...
[ 5814.558260] MT2060: successfully identified (IF1 = 1221)
[ 5815.159482] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.4/0000:08:06.2/usb9/9-1/input/input6
[ 5815.159568] dvb-usb: schedule remote query interval to 50 msecs.
[ 5815.159575] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
[ 5815.159851] dib0700: rc submit urb failed
[ 5815.159855]