Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Windows Version History
- The following is a product history for Microsoft Windows versions 1.x, 2.03, 2.1, 2.11, 3.0, 3.0a, 3.1, and 3.11:
- Version Date Requirements
- ------- ---- ------------
- 1.01 11/85 - MS-DOS version 2.0
- - Two double-sided disk drives or a hard disk
- - 256K of memory or greater
- - Graphics-adapter card
- 1.03 8/86 Requirements
- - MS-DOS version 2.0
- - Two double-sided disk drives or a hard disk
- - 320K of memory or greater
- - Graphics-adapter card
- Changes:
- - MS-DOS version 3.2 support
- - Enhanced keyboard support
- - AT&T 6300 and AT&T 6300 Plus support
- - 14-, 18-, and 24-point sizes added to
- TimesRoman and Helvetica fonts
- - Generic/Text Only printer driver added
- - PostScript printer driver added
- - .WRI extension used for Windows Write files
- (version 1.01 used .DOC extension)
- - Support for all features of the international
- version
- DDL 1/87 Windows Device Driver Library Volume 1
- Additional support for display devices,
- printers, and pointing devices added
- 1.04 4/87 Requirements
- - MS-DOS version 2.0
- - Two double-sided disk drives or a hard disk
- 320K of memory or greater
- - Graphics-adapter card
- Changes
- - IBM Personal System/2 support
- - COMM.DRV revised to support ept port for IBM
- 3812 Pageprinter
- - HP downloadable soft font support
- 2.03 11/87 Requirements
- - MS-DOS version 3.0
- - Two double-sided disk drives or a hard disk
- - 512K of memory or greater
- - Graphics-adapter card
- Changes
- - Overlapping windows instead of tiled windows
- - LIM Version 4.0 expanded memory support
- - Dynamic Data Exchange (DDE) support
- - SMARTDrive disk-cache program included
- - Revised .FON format for screen fonts
- - NEWFON.EXE included to convert 1.x font
- format to 2.x font format
- - Revised Paint file format
- - CVTPAINT.EXE included to convert 2.x
- Paint file format to 1.x format
- - About command moved to File menu from System
- menu
- - Printer Timeouts option added to Control
- Panel
- - Mouse Acceleration option added to Control
- Panel
- - Warning Beep toggle added to Control Panel
- - Notepad About command reports
- - Remaining Free Space
- - 3812 Pageprinter no longer supported
- 2.10 5/27/88 Requirements
- - 512K Memory
- - MS-DOS version 3.0 or later
- - One floppy-disk drive AND one hard disk (note
- that a hard disk is now required)
- - Graphics adapter card (the box notes: IBM
- EGA, IBM VGA, IBM 8514, IBM CGA, Hercules
- Graphics Card, or compatibles)
- - Use of the Microsoft Mouse is optional
- - Packaged with 5.25-inch 1.2 megabyte
- disks OR 3.5-inch 720K disks, plus an
- order form for free 360K 5.25-inch disks
- Changes
- - New HIMEM.SYS driver allowing the use of the first
- 64K of extended memory to store part of Windows,
- giving approximately 50K additional conventional
- memory inside Windows
- - Support for approximately 65 more printers than
- version 2.03, bringing the total supported
- printers to approximately 127
- - Support for additional computers
- - Support for additional display devices
- 2.11 3/13/89 Requirements
- Same as Version 2.1
- Changes
- - Accounts for memory freed by XMS when computing
- the maximum swap size allowed
- - Increased minimum bankable memory required for
- large frame EMS
- - Setup program no longer terminates when
- incompatible driver is encountered
- - Setup corrected to permit set up on 512K machine
- with MS-DOS version 3.3
- - Updated COMM.DRV to solve handshaking problems at
- 9600 bits per second (BPS)
- - Updated HPPCL.DRV driver that supports LaserJet
- series IID, Olivetti LP 5000, Toshiba
- - PageLaser 12, and Intel Visual Edge
- - Updated PSCRIPT.DRV driver that supports
- Olivetti LP 5000 in PostScript mode
- - Printing speed increased
- - Windows/386 WINOLDAP.MOD modified to support high-
- resolution displays
- Additions
- - AppleTalk library (must accompany the new
- PostScript driver)
- - Toshiba 24-pin printer driver
- - 8514/a driver for Windows/386
- - /E switch to adjust large frame EMS threshold
- 3.0 5/22/90 Requirements
- 2.11 requirements plus the following:
- - MS-DOS 3.1 or higher
- - 640K Conventional Memory
- - 256K Extended Memory
- Changes
- - Windows runs in protected mode -- direct extended
- memory access
- - 386 enhanced mode virtual memory provides more
- memory than physically in RAM by swapping blocks
- of RAM to the hard drive.
- - Color palette managed by Windows 3.0
- - Device-independent color bitmap support
- - Improved network support
- - New dialog boxes, system fonts, and menus
- - Graphical environment
- - New HIMEM.SYS XMS (spec. 2.0) driver. 16 MB
- support
- - EMM386.SYS expanded memory manager
- - 32 printer drivers supporting 170 different
- printers -- including HP LaserJet III series
- - MS-DOS programs run in a window
- - Three mode operation (real, standard, 386
- enhanced).
- - Icon-based Program Manager
- - Tree-structured File Manager
- - Asymetrix Daybook 1.0a bundled
- 3.00a 10/31/90 Requirements
- Same as Windows 3.0
- Changes
- - Maintenance release of 3.0 focusing on very
- specific problems with:
- Networking
- Dynamic Data Exchange
- Low-memory conditions
- Setup
- Extended character support for printers
- - Retail package shipped with Windows Q&A booklet
- 3.00a
- Multimedia Fall
- Extensions 1991 Requirements
- Multimedia PC (MPC) Specifications:
- - 80386 sx or dx IBM compatible
- - 2 megabytes RAM
- - VGA or higher (16 color minimum)
- - 30 Megabyte hard drive
- - CD-ROM (with audio output support)
- - 2-button mouse
- - Audio hardware
- Changes
- - Available only through hardware OEM
- - New device drivers to connect with specific MPC
- hardware.
- - Introduced Media Control Interface (MCI)
- - Enhanced Control Panel includes screen saver,
- video driver icon (Drivers), joystick control,
- driver installer, event based sound control,
- and MIDI mapping control
- - New Accessories: MPC Alarm Clock, Media Player,
- - Sound Recorder
- 3.10 4/6/92 Requirements
- - MS-DOS 3.1 or later
- - IBM compatible 80286 or higher (386 recommended)
- - 640K Conventional memory
- - 256K extended memory (XMS v 2.0 or higher)
- - 1024K extended memory recommended on 80286
- - 2048K extended memory recommended on 80386
- - 5.25-inch (high density) or 3.5-inch floppy
- drive
- - Fixed drive with 6 megabytes free (10 megabytes
- recommended)
- - EGA, VGA, SVGA, XGA, 8514/A, or Hercules video
- card or 100% compatible card, and monitor
- - Mouse recommended
- Changes
- - Available in upgrade or full package (upgrade
- does not require earlier version)
- - Improved Setup program offers express, custom,
- network, and troubleshooting setup
- - Computer-based Windows 3.1 tutorial
- - Consistent dialog boxes
- - Improved online Help
- - OLE Drag and drop, OLE support in many applications
- - Improved File Manager
- - Improved printer support through use of
- UNIdriver
- - New video drivers support MS-DOS graphics in a
- window
- - WD1003 virtual hard drive controller
- - Virtual memory changeable in Control Panel
- - Standard and enhanced mode operation only
- - TrueType scalable font support
- - Includes multimedia extensions (inclusions)
- - Includes new SMARTDrive version 4.0, HIMEM XMS
- manager 3.0, new EMM386.EXE
- - Standard mode can now run with EMM386.EXE running
- - Documentation includes "Getting Started" manual
- - 266 different types of printers supported
- 3.11 12/31/93 Requirements
- - Same as version 3.1
- Changes
- - Certificate of Authenticity
- - More sophisticated hologram and an MS (3M) sticker
- on box
- - An 800 number to call (in the United States &
- Canada) and check for product legitimacy
- - Updated drivers
- - Five updated core files
- - NetWare support files (from Novell)
- APPLIES TO
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement