API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 23rd, 2018
64
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 217.98 KB | None | 0 0
raw download clone embed print report
  1. ============================== 50 ==============================
  2. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  3. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. /dev/sda [megaraid_disk_50] [SAT]: Device open changed type from 'megaraid,50' to 'sat+megaraid,50'
  6. === START OF INFORMATION SECTION ===
  7. Device Model: Micron_1100_MTFDDAK512TBN
  8. Serial Number: 170815FD3436
  9. LU WWN Device Id: 5 00a075 115fd3436
  10. Firmware Version: M0MU031
  11. User Capacity: 512 110 190 592 bytes [512 GB]
  12. Sector Size: 512 bytes logical/physical
  13. Rotation Rate: Solid State Device
  14. Device is: Not in smartctl database [for details use: -P showall]
  15. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  16. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Mon Apr 23 10:35:48 2018 CEST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  22. SMART Enabled.
  23.  
  24. === START OF READ SMART DATA SECTION ===
  25. SMART overall-health self-assessment test result: PASSED
  26. Warning: This result is based on an Attribute check.
  27.  
  28. General SMART Values:
  29. Offline data collection status: (0x04) Offline data collection activity
  30. was suspended by an interrupting command from host.
  31. Auto Offline Data Collection: Disabled.
  32. Self-test execution status: ( 0) The previous self-test routine completed
  33. without error or no self-test has ever
  34. been run.
  35. Total time to complete Offline
  36. data collection: ( 381) seconds.
  37. Offline data collection
  38. capabilities: (0x7b) SMART execute Offline immediate.
  39. Auto Offline data collection on/off support.
  40. Suspend Offline collection upon new
  41. command.
  42. Offline surface scan supported.
  43. Self-test supported.
  44. Conveyance Self-test supported.
  45. Selective Self-test supported.
  46. SMART capabilities: (0x0003) Saves SMART data before entering
  47. power-saving mode.
  48. Supports SMART auto save timer.
  49. Error logging capability: (0x01) Error logging supported.
  50. General Purpose Logging supported.
  51. Short self-test routine
  52. recommended polling time: ( 2) minutes.
  53. Extended self-test routine
  54. recommended polling time: ( 7) minutes.
  55. Conveyance self-test routine
  56. recommended polling time: ( 3) minutes.
  57. SCT capabilities: (0x0035) SCT Status supported.
  58. SCT Feature Control supported.
  59. SCT Data Table supported.
  60.  
  61. SMART Attributes Data Structure revision number: 16
  62. Vendor Specific SMART Attributes with Thresholds:
  63. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  64. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 6
  65. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 4
  66. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8562
  67. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 13
  68. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1
  69. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  70. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 21
  71. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10
  72. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  73. 184 End-to-End_Error 0x0032 099 099 000 Old_age Always - 1
  74. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 5
  75. 194 Temperature_Celsius 0x0022 070 062 000 Old_age Always - 30 (Min/Max 19/38)
  76. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 4
  77. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  78. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 2
  79. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  80. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  81. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 1
  82. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 8951555530
  83. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 279743096
  84. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 338850999
  85. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2448
  86. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 24
  87.  
  88. SMART Error Log Version: 1
  89. ATA Error Count: 5
  90. CR = Command Register [HEX]
  91. FR = Features Register [HEX]
  92. SC = Sector Count Register [HEX]
  93. SN = Sector Number Register [HEX]
  94. CL = Cylinder Low Register [HEX]
  95. CH = Cylinder High Register [HEX]
  96. DH = Device/Head Register [HEX]
  97. DC = Device Command Register [HEX]
  98. ER = Error register [HEX]
  99. ST = Status register [HEX]
  100. Powered_Up_Time is measured from power on, and printed as
  101. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  102. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  103.  
  104. Error 5 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  105. When the command that caused the error occurred, the device was active or idle.
  106.  
  107. After command completion occurred, registers were:
  108. ER ST SC SN CL CH DH
  109. -- -- -- -- -- -- --
  110. 40 51 bf 41 b4 7f 40 Error: UNC at LBA = 0x007fb441 = 8369217
  111.  
  112. Commands leading to the command that caused the error were:
  113. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  114. -- -- -- -- -- -- -- -- ---------------- --------------------
  115. 60 02 bf 41 b4 7f 40 00 44d+10:16:38.112 READ FPDMA QUEUED
  116. e5 00 00 00 00 00 00 00 44d+10:16:38.112 CHECK POWER MODE
  117. ec 00 00 00 00 00 00 00 44d+10:16:38.112 IDENTIFY DEVICE
  118. b0 d0 00 00 4f c2 00 00 44d+10:16:38.112 SMART READ DATA
  119. ec 00 00 00 00 00 00 00 44d+10:16:38.112 IDENTIFY DEVICE
  120.  
  121. Error 4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  122. When the command that caused the error occurred, the device was active or idle.
  123.  
  124. After command completion occurred, registers were:
  125. ER ST SC SN CL CH DH
  126. -- -- -- -- -- -- --
  127. 40 51 bf 41 b4 7f 40 Error: UNC at LBA = 0x007fb441 = 8369217
  128.  
  129. Commands leading to the command that caused the error were:
  130. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  131. -- -- -- -- -- -- -- -- ---------------- --------------------
  132. 60 da bf 41 b4 7f 40 00 44d+10:16:38.112 READ FPDMA QUEUED
  133. ef 02 00 00 00 00 00 00 44d+10:16:38.112 SET FEATURES [Enable write cache]
  134. ef aa 00 00 00 00 00 00 44d+10:16:38.112 SET FEATURES [Enable read look-ahead]
  135. ec 00 00 00 00 00 00 00 44d+10:16:38.112 IDENTIFY DEVICE
  136. b0 d0 00 00 4f c2 00 00 44d+10:16:38.112 SMART READ DATA
  137.  
  138. Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  139. When the command that caused the error occurred, the device was active or idle.
  140.  
  141. After command completion occurred, registers were:
  142. ER ST SC SN CL CH DH
  143. -- -- -- -- -- -- --
  144. 40 51 bf 41 b4 7f 40 Error: UNC at LBA = 0x007fb441 = 8369217
  145.  
  146. Commands leading to the command that caused the error were:
  147. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  148. -- -- -- -- -- -- -- -- ---------------- --------------------
  149. 60 00 bf 41 b4 7f 40 00 44d+10:16:38.112 READ FPDMA QUEUED
  150. 60 da 40 00 b4 7f 40 00 44d+10:16:38.112 READ FPDMA QUEUED
  151. 2f 00 01 10 00 00 e0 00 44d+10:16:38.112 READ LOG EXT
  152. 60 da 00 00 b4 7f 40 00 44d+10:16:38.112 READ FPDMA QUEUED
  153. 60 da 00 00 b2 7f 40 00 44d+10:16:38.112 READ FPDMA QUEUED
  154.  
  155. Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  156. When the command that caused the error occurred, the device was active or idle.
  157.  
  158. After command completion occurred, registers were:
  159. ER ST SC SN CL CH DH
  160. -- -- -- -- -- -- --
  161. 40 51 00 00 b4 7f 40 Error: UNC at LBA = 0x007fb400 = 8369152
  162.  
  163. Commands leading to the command that caused the error were:
  164. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  165. -- -- -- -- -- -- -- -- ---------------- --------------------
  166. 60 da 00 00 b4 7f 40 00 44d+10:16:38.112 READ FPDMA QUEUED
  167. 60 da 00 00 b2 7f 40 00 44d+10:16:38.112 READ FPDMA QUEUED
  168. 60 00 00 00 b0 7f 40 00 44d+10:16:38.112 READ FPDMA QUEUED
  169. 60 00 00 00 ae 7f 40 00 44d+10:16:38.112 READ FPDMA QUEUED
  170. 60 00 00 00 ac 7f 40 00 44d+10:16:38.112 READ FPDMA QUEUED
  171.  
  172. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  173. When the command that caused the error occurred, the device was active or idle.
  174.  
  175. After command completion occurred, registers were:
  176. ER ST SC SN CL CH DH
  177. -- -- -- -- -- -- --
  178. 40 51 00 00 36 18 40 Error: UNC at LBA = 0x00183600 = 1586688
  179.  
  180. Commands leading to the command that caused the error were:
  181. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  182. -- -- -- -- -- -- -- -- ---------------- --------------------
  183. 60 00 00 00 36 18 40 00 31d+20:45:12.704 READ FPDMA QUEUED
  184. 60 00 00 00 34 18 40 00 31d+20:45:12.704 READ FPDMA QUEUED
  185. 60 00 00 00 32 18 40 00 31d+20:45:12.704 READ FPDMA QUEUED
  186. 60 00 00 00 30 18 40 00 31d+20:45:12.704 READ FPDMA QUEUED
  187. 60 00 00 00 2e 18 40 00 31d+20:45:12.704 READ FPDMA QUEUED
  188.  
  189. SMART Self-test log structure revision number 1
  190. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  191. # 1 Vendor (0xff) Completed without error 00% 8560 -
  192. # 2 Vendor (0xff) Completed without error 00% 7029 -
  193. # 3 Vendor (0xff) Completed without error 00% 4899 -
  194. # 4 Short offline Completed without error 00% 4645 -
  195. # 5 Vendor (0xff) Completed without error 00% 4644 -
  196. # 6 Vendor (0xff) Completed without error 00% 4530 -
  197. # 7 Vendor (0xff) Completed without error 00% 4290 -
  198. # 8 Vendor (0xff) Completed without error 00% 4171 -
  199. # 9 Vendor (0xff) Completed without error 00% 3920 -
  200. #10 Vendor (0xff) Completed without error 00% 3654 -
  201. #11 Vendor (0xff) Completed without error 00% 3418 -
  202. #12 Vendor (0xff) Completed without error 00% 3175 -
  203. #13 Vendor (0xff) Completed without error 00% 2936 -
  204. #14 Vendor (0xff) Completed without error 00% 2644 -
  205. #15 Vendor (0xff) Completed without error 00% 2348 -
  206. #16 Vendor (0xff) Completed without error 00% 2082 -
  207. #17 Vendor (0xff) Completed without error 00% 1889 -
  208. #18 Short offline Completed without error 00% 1698 -
  209. #19 Vendor (0xff) Completed without error 00% 1698 -
  210. #20 Vendor (0xff) Completed without error 00% 1584 -
  211. #21 Short offline Completed without error 00% 1247 -
  212.  
  213. SMART Selective self-test log data structure revision number 1
  214. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  215. 1 0 0 Not_testing
  216. 2 0 0 Not_testing
  217. 3 0 0 Not_testing
  218. 4 0 0 Not_testing
  219. 5 0 0 Not_testing
  220. Selective self-test flags (0x0):
  221. After scanning selected spans, do NOT read-scan remainder of disk.
  222. If Selective self-test is pending on power-up, resume after 0 minute delay.
  223.  
  224. ============================== 53 ==============================
  225. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  226. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  227.  
  228. /dev/sda [megaraid_disk_53] [SAT]: Device open changed type from 'megaraid,53' to 'sat+megaraid,53'
  229. === START OF INFORMATION SECTION ===
  230. Device Model: Micron_1100_MTFDDAK512TBN
  231. Serial Number: 170815FD3C3F
  232. LU WWN Device Id: 5 00a075 115fd3c3f
  233. Firmware Version: M0MU031
  234. User Capacity: 512 110 190 592 bytes [512 GB]
  235. Sector Size: 512 bytes logical/physical
  236. Rotation Rate: Solid State Device
  237. Device is: Not in smartctl database [for details use: -P showall]
  238. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  239. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  240. Local Time is: Mon Apr 23 10:35:48 2018 CEST
  241. SMART support is: Available - device has SMART capability.
  242. SMART support is: Enabled
  243.  
  244. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  245. SMART Enabled.
  246.  
  247. === START OF READ SMART DATA SECTION ===
  248. SMART overall-health self-assessment test result: PASSED
  249. Warning: This result is based on an Attribute check.
  250.  
  251. General SMART Values:
  252. Offline data collection status: (0x04) Offline data collection activity
  253. was suspended by an interrupting command from host.
  254. Auto Offline Data Collection: Disabled.
  255. Self-test execution status: ( 0) The previous self-test routine completed
  256. without error or no self-test has ever
  257. been run.
  258. Total time to complete Offline
  259. data collection: ( 937) seconds.
  260. Offline data collection
  261. capabilities: (0x7b) SMART execute Offline immediate.
  262. Auto Offline data collection on/off support.
  263. Suspend Offline collection upon new
  264. command.
  265. Offline surface scan supported.
  266. Self-test supported.
  267. Conveyance Self-test supported.
  268. Selective Self-test supported.
  269. SMART capabilities: (0x0003) Saves SMART data before entering
  270. power-saving mode.
  271. Supports SMART auto save timer.
  272. Error logging capability: (0x01) Error logging supported.
  273. General Purpose Logging supported.
  274. Short self-test routine
  275. recommended polling time: ( 2) minutes.
  276. Extended self-test routine
  277. recommended polling time: ( 7) minutes.
  278. Conveyance self-test routine
  279. recommended polling time: ( 3) minutes.
  280. SCT capabilities: (0x0035) SCT Status supported.
  281. SCT Feature Control supported.
  282. SCT Data Table supported.
  283.  
  284. SMART Attributes Data Structure revision number: 16
  285. Vendor Specific SMART Attributes with Thresholds:
  286. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  287. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  288. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  289. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  290. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  291. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  292. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  293. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  294. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  295. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  296. 184 End-to-End_Error 0x0032 094 094 000 Old_age Always - 6
  297. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 3
  298. 194 Temperature_Celsius 0x0022 071 062 000 Old_age Always - 29 (Min/Max 21/38)
  299. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  300. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  301. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  302. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  303. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  304. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  305. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10905564299
  306. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 340822594
  307. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 195251463
  308. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2455
  309. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  310.  
  311. SMART Error Log Version: 1
  312. ATA Error Count: 3
  313. CR = Command Register [HEX]
  314. FR = Features Register [HEX]
  315. SC = Sector Count Register [HEX]
  316. SN = Sector Number Register [HEX]
  317. CL = Cylinder Low Register [HEX]
  318. CH = Cylinder High Register [HEX]
  319. DH = Device/Head Register [HEX]
  320. DC = Device Command Register [HEX]
  321. ER = Error register [HEX]
  322. ST = Status register [HEX]
  323. Powered_Up_Time is measured from power on, and printed as
  324. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  325. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  326.  
  327. Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  328. When the command that caused the error occurred, the device was active or idle.
  329.  
  330. After command completion occurred, registers were:
  331. ER ST SC SN CL CH DH
  332. -- -- -- -- -- -- --
  333. 40 51 00 18 e2 fd 40 Error: UNC at LBA = 0x00fde218 = 16638488
  334.  
  335. Commands leading to the command that caused the error were:
  336. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  337. -- -- -- -- -- -- -- -- ---------------- --------------------
  338. 60 00 00 18 e2 fd 40 00 21d+06:18:50.816 READ FPDMA QUEUED
  339. 61 00 00 00 be 07 40 00 21d+06:18:50.816 WRITE FPDMA QUEUED
  340. 61 da 08 60 1b 06 40 00 21d+06:18:50.816 WRITE FPDMA QUEUED
  341. 61 00 08 18 1a 06 40 00 21d+06:18:50.816 WRITE FPDMA QUEUED
  342. 61 00 48 48 2d 06 40 00 21d+06:18:50.816 WRITE FPDMA QUEUED
  343.  
  344. Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  345. When the command that caused the error occurred, the device was active or idle.
  346.  
  347. After command completion occurred, registers were:
  348. ER ST SC SN CL CH DH
  349. -- -- -- -- -- -- --
  350. 40 51 00 c0 24 4c 40 Error: UNC at LBA = 0x004c24c0 = 4990144
  351.  
  352. Commands leading to the command that caused the error were:
  353. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  354. -- -- -- -- -- -- -- -- ---------------- --------------------
  355. 60 00 00 c0 24 4c 40 00 8d+09:49:38.112 READ FPDMA QUEUED
  356. 60 da c0 00 24 4c 40 00 8d+09:49:38.112 READ FPDMA QUEUED
  357. 60 02 00 00 2a 4c 40 00 8d+09:49:38.112 READ FPDMA QUEUED
  358. 60 00 00 00 2e c6 40 00 8d+09:49:38.112 READ FPDMA QUEUED
  359. 60 da 00 00 28 4c 40 00 8d+09:49:38.112 READ FPDMA QUEUED
  360.  
  361. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  362. When the command that caused the error occurred, the device was active or idle.
  363.  
  364. After command completion occurred, registers were:
  365. ER ST SC SN CL CH DH
  366. -- -- -- -- -- -- --
  367. 40 51 00 00 24 4c 40 Error: UNC at LBA = 0x004c2400 = 4989952
  368.  
  369. Commands leading to the command that caused the error were:
  370. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  371. -- -- -- -- -- -- -- -- ---------------- --------------------
  372. 60 00 00 00 24 4c 40 00 8d+09:49:38.112 READ FPDMA QUEUED
  373. 60 da 00 00 28 c6 40 00 8d+09:49:38.112 READ FPDMA QUEUED
  374. 60 00 00 00 22 4c 40 00 8d+09:49:38.112 READ FPDMA QUEUED
  375. 60 da 00 00 20 4c 40 00 8d+09:49:38.112 READ FPDMA QUEUED
  376. 60 00 00 00 26 c6 40 00 8d+09:49:38.112 READ FPDMA QUEUED
  377.  
  378. SMART Self-test log structure revision number 1
  379. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  380. # 1 Vendor (0xff) Completed without error 00% 8655 -
  381. # 2 Vendor (0xff) Completed without error 00% 7950 -
  382. # 3 Vendor (0xff) Completed without error 00% 6463 -
  383. # 4 Vendor (0xff) Completed without error 00% 5888 -
  384. # 5 Vendor (0xff) Completed without error 00% 5343 -
  385. # 6 Vendor (0xff) Completed without error 00% 5164 -
  386. # 7 Vendor (0xff) Completed without error 00% 4913 -
  387. # 8 Vendor (0xff) Completed without error 00% 4623 -
  388. # 9 Vendor (0xff) Completed without error 00% 4363 -
  389. #10 Vendor (0xff) Completed without error 00% 4062 -
  390. #11 Vendor (0xff) Completed without error 00% 3750 -
  391. #12 Vendor (0xff) Completed without error 00% 3549 -
  392. #13 Vendor (0xff) Completed without error 00% 3350 -
  393. #14 Vendor (0xff) Completed without error 00% 3139 -
  394. #15 Vendor (0xff) Completed without error 00% 1546 -
  395. #16 Vendor (0xff) Completed without error 00% 1395 -
  396. #17 Short offline Completed without error 00% 1100 -
  397. #18 Vendor (0xff) Completed without error 00% 1038 -
  398. #19 Vendor (0xff) Completed without error 00% 646 -
  399. #20 Vendor (0xff) Completed without error 00% 469 -
  400.  
  401. SMART Selective self-test log data structure revision number 1
  402. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  403. 1 0 0 Not_testing
  404. 2 0 0 Not_testing
  405. 3 0 0 Not_testing
  406. 4 0 0 Not_testing
  407. 5 0 0 Not_testing
  408. Selective self-test flags (0x0):
  409. After scanning selected spans, do NOT read-scan remainder of disk.
  410. If Selective self-test is pending on power-up, resume after 0 minute delay.
  411.  
  412. ============================== 52 ==============================
  413. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  414. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  415.  
  416. /dev/sda [megaraid_disk_52] [SAT]: Device open changed type from 'megaraid,52' to 'sat+megaraid,52'
  417. === START OF INFORMATION SECTION ===
  418. Device Model: Micron_1100_MTFDDAK512TBN
  419. Serial Number: 170815EE4306
  420. LU WWN Device Id: 5 00a075 115ee4306
  421. Firmware Version: M0MU031
  422. User Capacity: 512 110 190 592 bytes [512 GB]
  423. Sector Size: 512 bytes logical/physical
  424. Rotation Rate: Solid State Device
  425. Device is: Not in smartctl database [for details use: -P showall]
  426. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  427. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  428. Local Time is: Mon Apr 23 10:35:48 2018 CEST
  429. SMART support is: Available - device has SMART capability.
  430. SMART support is: Enabled
  431.  
  432. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  433. SMART Enabled.
  434.  
  435. === START OF READ SMART DATA SECTION ===
  436. SMART overall-health self-assessment test result: PASSED
  437. Warning: This result is based on an Attribute check.
  438.  
  439. General SMART Values:
  440. Offline data collection status: (0x04) Offline data collection activity
  441. was suspended by an interrupting command from host.
  442. Auto Offline Data Collection: Disabled.
  443. Self-test execution status: ( 0) The previous self-test routine completed
  444. without error or no self-test has ever
  445. been run.
  446. Total time to complete Offline
  447. data collection: ( 234) seconds.
  448. Offline data collection
  449. capabilities: (0x7b) SMART execute Offline immediate.
  450. Auto Offline data collection on/off support.
  451. Suspend Offline collection upon new
  452. command.
  453. Offline surface scan supported.
  454. Self-test supported.
  455. Conveyance Self-test supported.
  456. Selective Self-test supported.
  457. SMART capabilities: (0x0003) Saves SMART data before entering
  458. power-saving mode.
  459. Supports SMART auto save timer.
  460. Error logging capability: (0x01) Error logging supported.
  461. General Purpose Logging supported.
  462. Short self-test routine
  463. recommended polling time: ( 2) minutes.
  464. Extended self-test routine
  465. recommended polling time: ( 6) minutes.
  466. Conveyance self-test routine
  467. recommended polling time: ( 3) minutes.
  468. SCT capabilities: (0x0035) SCT Status supported.
  469. SCT Feature Control supported.
  470. SCT Data Table supported.
  471.  
  472. SMART Attributes Data Structure revision number: 16
  473. Vendor Specific SMART Attributes with Thresholds:
  474. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  475. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  476. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  477. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  478. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  479. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  480. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  481. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  482. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  483. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  484. 184 End-to-End_Error 0x0032 098 098 000 Old_age Always - 2
  485. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  486. 194 Temperature_Celsius 0x0022 072 063 000 Old_age Always - 28 (Min/Max 21/37)
  487. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  488. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  489. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  490. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  491. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  492. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  493. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10933717072
  494. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 341707181
  495. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 189608483
  496. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2473
  497. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  498.  
  499. SMART Error Log Version: 1
  500. No Errors Logged
  501.  
  502. SMART Self-test log structure revision number 1
  503. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  504. # 1 Vendor (0xff) Completed without error 00% 8581 -
  505. # 2 Vendor (0xff) Completed without error 00% 7571 -
  506. # 3 Vendor (0xff) Completed without error 00% 6414 -
  507. # 4 Vendor (0xff) Completed without error 00% 5871 -
  508. # 5 Vendor (0xff) Completed without error 00% 5344 -
  509. # 6 Vendor (0xff) Completed without error 00% 5127 -
  510. # 7 Vendor (0xff) Completed without error 00% 4869 -
  511. # 8 Vendor (0xff) Completed without error 00% 4566 -
  512. # 9 Vendor (0xff) Completed without error 00% 4291 -
  513. #10 Vendor (0xff) Completed without error 00% 4026 -
  514. #11 Vendor (0xff) Completed without error 00% 3807 -
  515. #12 Vendor (0xff) Completed without error 00% 3598 -
  516. #13 Vendor (0xff) Completed without error 00% 3410 -
  517. #14 Vendor (0xff) Completed without error 00% 3170 -
  518. #15 Vendor (0xff) Completed without error 00% 2990 -
  519. #16 Vendor (0xff) Completed without error 00% 2852 -
  520. #17 Vendor (0xff) Completed without error 00% 2621 -
  521. #18 Vendor (0xff) Completed without error 00% 2385 -
  522. #19 Vendor (0xff) Completed without error 00% 2158 -
  523. #20 Vendor (0xff) Completed without error 00% 1909 -
  524. #21 Vendor (0xff) Completed without error 00% 1720 -
  525.  
  526. SMART Selective self-test log data structure revision number 1
  527. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  528. 1 0 0 Not_testing
  529. 2 0 0 Not_testing
  530. 3 0 0 Not_testing
  531. 4 0 0 Not_testing
  532. 5 0 0 Not_testing
  533. Selective self-test flags (0x0):
  534. After scanning selected spans, do NOT read-scan remainder of disk.
  535. If Selective self-test is pending on power-up, resume after 0 minute delay.
  536.  
  537. ============================== 45 ==============================
  538. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  539. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  540.  
  541. /dev/sda [megaraid_disk_45] [SAT]: Device open changed type from 'megaraid,45' to 'sat+megaraid,45'
  542. === START OF INFORMATION SECTION ===
  543. Device Model: Micron_1100_MTFDDAK512TBN
  544. Serial Number: 170815EE630E
  545. LU WWN Device Id: 5 00a075 115ee630e
  546. Firmware Version: M0MU031
  547. User Capacity: 512 110 190 592 bytes [512 GB]
  548. Sector Size: 512 bytes logical/physical
  549. Rotation Rate: Solid State Device
  550. Device is: Not in smartctl database [for details use: -P showall]
  551. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  552. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  553. Local Time is: Mon Apr 23 10:35:48 2018 CEST
  554. SMART support is: Available - device has SMART capability.
  555. SMART support is: Enabled
  556.  
  557. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  558. SMART Enabled.
  559.  
  560. === START OF READ SMART DATA SECTION ===
  561. SMART overall-health self-assessment test result: PASSED
  562. Warning: This result is based on an Attribute check.
  563.  
  564. General SMART Values:
  565. Offline data collection status: (0x04) Offline data collection activity
  566. was suspended by an interrupting command from host.
  567. Auto Offline Data Collection: Disabled.
  568. Self-test execution status: ( 0) The previous self-test routine completed
  569. without error or no self-test has ever
  570. been run.
  571. Total time to complete Offline
  572. data collection: ( 355) seconds.
  573. Offline data collection
  574. capabilities: (0x7b) SMART execute Offline immediate.
  575. Auto Offline data collection on/off support.
  576. Suspend Offline collection upon new
  577. command.
  578. Offline surface scan supported.
  579. Self-test supported.
  580. Conveyance Self-test supported.
  581. Selective Self-test supported.
  582. SMART capabilities: (0x0003) Saves SMART data before entering
  583. power-saving mode.
  584. Supports SMART auto save timer.
  585. Error logging capability: (0x01) Error logging supported.
  586. General Purpose Logging supported.
  587. Short self-test routine
  588. recommended polling time: ( 2) minutes.
  589. Extended self-test routine
  590. recommended polling time: ( 7) minutes.
  591. Conveyance self-test routine
  592. recommended polling time: ( 3) minutes.
  593. SCT capabilities: (0x0035) SCT Status supported.
  594. SCT Feature Control supported.
  595. SCT Data Table supported.
  596.  
  597. SMART Attributes Data Structure revision number: 16
  598. Vendor Specific SMART Attributes with Thresholds:
  599. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  600. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  601. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  602. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  603. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  604. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  605. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  606. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  607. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  608. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  609. 184 End-to-End_Error 0x0032 099 099 000 Old_age Always - 1
  610. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  611. 194 Temperature_Celsius 0x0022 072 063 000 Old_age Always - 28 (Min/Max 21/37)
  612. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  613. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  614. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  615. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  616. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  617. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  618. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10985634309
  619. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 343367629
  620. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 193706856
  621. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2467
  622. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  623.  
  624. SMART Error Log Version: 1
  625. No Errors Logged
  626.  
  627. SMART Self-test log structure revision number 1
  628. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  629. # 1 Vendor (0xff) Completed without error 00% 7747 -
  630. # 2 Vendor (0xff) Completed without error 00% 7679 -
  631. # 3 Vendor (0xff) Completed without error 00% 6431 -
  632. # 4 Vendor (0xff) Completed without error 00% 5871 -
  633. # 5 Vendor (0xff) Completed without error 00% 5344 -
  634. # 6 Vendor (0xff) Completed without error 00% 5199 -
  635. # 7 Vendor (0xff) Completed without error 00% 4952 -
  636. # 8 Vendor (0xff) Completed without error 00% 4663 -
  637. # 9 Vendor (0xff) Completed without error 00% 4428 -
  638. #10 Vendor (0xff) Completed without error 00% 4227 -
  639. #11 Vendor (0xff) Completed without error 00% 3996 -
  640. #12 Vendor (0xff) Completed without error 00% 3778 -
  641. #13 Vendor (0xff) Completed without error 00% 3548 -
  642. #14 Vendor (0xff) Completed without error 00% 3348 -
  643. #15 Vendor (0xff) Completed without error 00% 3146 -
  644. #16 Vendor (0xff) Completed without error 00% 2990 -
  645. #17 Vendor (0xff) Completed without error 00% 2830 -
  646. #18 Vendor (0xff) Completed without error 00% 2608 -
  647. #19 Vendor (0xff) Completed without error 00% 2387 -
  648. #20 Vendor (0xff) Completed without error 00% 2157 -
  649. #21 Vendor (0xff) Completed without error 00% 1941 -
  650.  
  651. SMART Selective self-test log data structure revision number 1
  652. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  653. 1 0 0 Not_testing
  654. 2 0 0 Not_testing
  655. 3 0 0 Not_testing
  656. 4 0 0 Not_testing
  657. 5 0 0 Not_testing
  658. Selective self-test flags (0x0):
  659. After scanning selected spans, do NOT read-scan remainder of disk.
  660. If Selective self-test is pending on power-up, resume after 0 minute delay.
  661.  
  662. ============================== 46 ==============================
  663. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  664. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  665.  
  666. /dev/sda [megaraid_disk_46] [SAT]: Device open changed type from 'megaraid,46' to 'sat+megaraid,46'
  667. === START OF INFORMATION SECTION ===
  668. Device Model: Micron_1100_MTFDDAK512TBN
  669. Serial Number: 170815EE5883
  670. LU WWN Device Id: 5 00a075 115ee5883
  671. Firmware Version: M0MU031
  672. User Capacity: 512 110 190 592 bytes [512 GB]
  673. Sector Size: 512 bytes logical/physical
  674. Rotation Rate: Solid State Device
  675. Device is: Not in smartctl database [for details use: -P showall]
  676. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  677. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  678. Local Time is: Mon Apr 23 10:35:48 2018 CEST
  679. SMART support is: Available - device has SMART capability.
  680. SMART support is: Enabled
  681.  
  682. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  683. SMART Enabled.
  684.  
  685. === START OF READ SMART DATA SECTION ===
  686. SMART overall-health self-assessment test result: PASSED
  687. Warning: This result is based on an Attribute check.
  688.  
  689. General SMART Values:
  690. Offline data collection status: (0x04) Offline data collection activity
  691. was suspended by an interrupting command from host.
  692. Auto Offline Data Collection: Disabled.
  693. Self-test execution status: ( 0) The previous self-test routine completed
  694. without error or no self-test has ever
  695. been run.
  696. Total time to complete Offline
  697. data collection: ( 2494) seconds.
  698. Offline data collection
  699. capabilities: (0x7b) SMART execute Offline immediate.
  700. Auto Offline data collection on/off support.
  701. Suspend Offline collection upon new
  702. command.
  703. Offline surface scan supported.
  704. Self-test supported.
  705. Conveyance Self-test supported.
  706. Selective Self-test supported.
  707. SMART capabilities: (0x0003) Saves SMART data before entering
  708. power-saving mode.
  709. Supports SMART auto save timer.
  710. Error logging capability: (0x01) Error logging supported.
  711. General Purpose Logging supported.
  712. Short self-test routine
  713. recommended polling time: ( 2) minutes.
  714. Extended self-test routine
  715. recommended polling time: ( 15) minutes.
  716. Conveyance self-test routine
  717. recommended polling time: ( 3) minutes.
  718. SCT capabilities: (0x0035) SCT Status supported.
  719. SCT Feature Control supported.
  720. SCT Data Table supported.
  721.  
  722. SMART Attributes Data Structure revision number: 16
  723. Vendor Specific SMART Attributes with Thresholds:
  724. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  725. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  726. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  727. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8658
  728. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  729. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  730. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  731. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  732. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  733. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  734. 184 End-to-End_Error 0x0032 097 097 000 Old_age Always - 3
  735. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  736. 194 Temperature_Celsius 0x0022 072 063 000 Old_age Always - 28 (Min/Max 21/37)
  737. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  738. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  739. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  740. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  741. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  742. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  743. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10936299041
  744. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 341779268
  745. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 199672529
  746. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2471
  747. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  748.  
  749. SMART Error Log Version: 1
  750. No Errors Logged
  751.  
  752. SMART Self-test log structure revision number 1
  753. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  754. # 1 Vendor (0xff) Completed without error 00% 8647 -
  755. # 2 Vendor (0xff) Completed without error 00% 7981 -
  756. # 3 Vendor (0xff) Completed without error 00% 6472 -
  757. # 4 Vendor (0xff) Completed without error 00% 5910 -
  758. # 5 Vendor (0xff) Completed without error 00% 5335 -
  759. # 6 Vendor (0xff) Completed without error 00% 5047 -
  760. # 7 Vendor (0xff) Completed without error 00% 4816 -
  761. # 8 Vendor (0xff) Completed without error 00% 4526 -
  762. # 9 Vendor (0xff) Completed without error 00% 4254 -
  763. #10 Vendor (0xff) Completed without error 00% 4006 -
  764. #11 Vendor (0xff) Completed without error 00% 3806 -
  765. #12 Vendor (0xff) Completed without error 00% 3577 -
  766. #13 Vendor (0xff) Completed without error 00% 3342 -
  767. #14 Vendor (0xff) Completed without error 00% 3153 -
  768. #15 Vendor (0xff) Completed without error 00% 2991 -
  769. #16 Vendor (0xff) Completed without error 00% 2868 -
  770. #17 Vendor (0xff) Completed without error 00% 2621 -
  771. #18 Vendor (0xff) Completed without error 00% 2385 -
  772. #19 Vendor (0xff) Completed without error 00% 2159 -
  773. #20 Vendor (0xff) Completed without error 00% 1942 -
  774. #21 Vendor (0xff) Completed without error 00% 1721 -
  775.  
  776. SMART Selective self-test log data structure revision number 1
  777. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  778. 1 0 0 Not_testing
  779. 2 0 0 Not_testing
  780. 3 0 0 Not_testing
  781. 4 0 0 Not_testing
  782. 5 0 0 Not_testing
  783. Selective self-test flags (0x0):
  784. After scanning selected spans, do NOT read-scan remainder of disk.
  785. If Selective self-test is pending on power-up, resume after 0 minute delay.
  786.  
  787. ============================== 34 ==============================
  788. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  789. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  790.  
  791. /dev/sda [megaraid_disk_34] [SAT]: Device open changed type from 'megaraid,34' to 'sat+megaraid,34'
  792. === START OF INFORMATION SECTION ===
  793. Device Model: Micron_1100_MTFDDAK512TBN
  794. Serial Number: 170815EE6133
  795. LU WWN Device Id: 5 00a075 115ee6133
  796. Firmware Version: M0MU031
  797. User Capacity: 512 110 190 592 bytes [512 GB]
  798. Sector Size: 512 bytes logical/physical
  799. Rotation Rate: Solid State Device
  800. Device is: Not in smartctl database [for details use: -P showall]
  801. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  802. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  803. Local Time is: Mon Apr 23 10:35:48 2018 CEST
  804. SMART support is: Available - device has SMART capability.
  805. SMART support is: Enabled
  806.  
  807. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  808. SMART Enabled.
  809.  
  810. === START OF READ SMART DATA SECTION ===
  811. SMART overall-health self-assessment test result: PASSED
  812. Warning: This result is based on an Attribute check.
  813.  
  814. General SMART Values:
  815. Offline data collection status: (0x04) Offline data collection activity
  816. was suspended by an interrupting command from host.
  817. Auto Offline Data Collection: Disabled.
  818. Self-test execution status: ( 0) The previous self-test routine completed
  819. without error or no self-test has ever
  820. been run.
  821. Total time to complete Offline
  822. data collection: ( 1020) seconds.
  823. Offline data collection
  824. capabilities: (0x7b) SMART execute Offline immediate.
  825. Auto Offline data collection on/off support.
  826. Suspend Offline collection upon new
  827. command.
  828. Offline surface scan supported.
  829. Self-test supported.
  830. Conveyance Self-test supported.
  831. Selective Self-test supported.
  832. SMART capabilities: (0x0003) Saves SMART data before entering
  833. power-saving mode.
  834. Supports SMART auto save timer.
  835. Error logging capability: (0x01) Error logging supported.
  836. General Purpose Logging supported.
  837. Short self-test routine
  838. recommended polling time: ( 2) minutes.
  839. Extended self-test routine
  840. recommended polling time: ( 8) minutes.
  841. Conveyance self-test routine
  842. recommended polling time: ( 3) minutes.
  843. SCT capabilities: (0x0035) SCT Status supported.
  844. SCT Feature Control supported.
  845. SCT Data Table supported.
  846.  
  847. SMART Attributes Data Structure revision number: 16
  848. Vendor Specific SMART Attributes with Thresholds:
  849. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  850. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  851. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  852. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  853. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  854. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  855. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  856. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  857. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  858. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  859. 184 End-to-End_Error 0x0032 098 098 000 Old_age Always - 2
  860. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1
  861. 194 Temperature_Celsius 0x0022 072 064 000 Old_age Always - 28 (Min/Max 21/36)
  862. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  863. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  864. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  865. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  866. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  867. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  868. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10911625280
  869. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 341005386
  870. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 191230079
  871. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2473
  872. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  873.  
  874. SMART Error Log Version: 1
  875. ATA Error Count: 1
  876. CR = Command Register [HEX]
  877. FR = Features Register [HEX]
  878. SC = Sector Count Register [HEX]
  879. SN = Sector Number Register [HEX]
  880. CL = Cylinder Low Register [HEX]
  881. CH = Cylinder High Register [HEX]
  882. DH = Device/Head Register [HEX]
  883. DC = Device Command Register [HEX]
  884. ER = Error register [HEX]
  885. ST = Status register [HEX]
  886. Powered_Up_Time is measured from power on, and printed as
  887. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  888. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  889.  
  890. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  891. When the command that caused the error occurred, the device was active or idle.
  892.  
  893. After command completion occurred, registers were:
  894. ER ST SC SN CL CH DH
  895. -- -- -- -- -- -- --
  896. 40 51 10 b0 3c a5 40 Error: UNC at LBA = 0x00a53cb0 = 10828976
  897.  
  898. Commands leading to the command that caused the error were:
  899. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  900. -- -- -- -- -- -- -- -- ---------------- --------------------
  901. 60 00 10 40 3d a5 40 00 7d+09:22:50.816 READ FPDMA QUEUED
  902. 60 00 40 f8 3c a5 40 00 7d+09:22:50.816 READ FPDMA QUEUED
  903. 60 da 40 b0 3c a5 40 00 7d+09:22:50.816 READ FPDMA QUEUED
  904. 60 02 10 f0 57 a1 40 00 7d+09:22:50.816 READ FPDMA QUEUED
  905. 60 00 10 d8 57 a1 40 00 7d+09:22:50.816 READ FPDMA QUEUED
  906.  
  907. SMART Self-test log structure revision number 1
  908. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  909. # 1 Vendor (0xff) Completed without error 00% 8653 -
  910. # 2 Vendor (0xff) Completed without error 00% 7768 -
  911. # 3 Vendor (0xff) Completed without error 00% 6442 -
  912. # 4 Vendor (0xff) Completed without error 00% 5883 -
  913. # 5 Vendor (0xff) Completed without error 00% 5344 -
  914. # 6 Vendor (0xff) Completed without error 00% 5178 -
  915. # 7 Vendor (0xff) Completed without error 00% 4892 -
  916. # 8 Vendor (0xff) Completed without error 00% 4580 -
  917. # 9 Vendor (0xff) Completed without error 00% 4307 -
  918. #10 Vendor (0xff) Completed without error 00% 4033 -
  919. #11 Vendor (0xff) Completed without error 00% 3810 -
  920. #12 Vendor (0xff) Completed without error 00% 3570 -
  921. #13 Vendor (0xff) Completed without error 00% 3349 -
  922. #14 Vendor (0xff) Completed without error 00% 3151 -
  923. #15 Vendor (0xff) Completed without error 00% 2990 -
  924. #16 Vendor (0xff) Completed without error 00% 2862 -
  925. #17 Vendor (0xff) Completed without error 00% 2647 -
  926. #18 Vendor (0xff) Completed without error 00% 2458 -
  927. #19 Vendor (0xff) Completed without error 00% 2172 -
  928. #20 Vendor (0xff) Completed without error 00% 1965 -
  929. #21 Vendor (0xff) Completed without error 00% 1719 -
  930.  
  931. SMART Selective self-test log data structure revision number 1
  932. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  933. 1 0 0 Not_testing
  934. 2 0 0 Not_testing
  935. 3 0 0 Not_testing
  936. 4 0 0 Not_testing
  937. 5 0 0 Not_testing
  938. Selective self-test flags (0x0):
  939. After scanning selected spans, do NOT read-scan remainder of disk.
  940. If Selective self-test is pending on power-up, resume after 0 minute delay.
  941.  
  942. ============================== 40 ==============================
  943. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  944. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  945.  
  946. /dev/sda [megaraid_disk_40] [SAT]: Device open changed type from 'megaraid,40' to 'sat+megaraid,40'
  947. === START OF INFORMATION SECTION ===
  948. Device Model: Micron_1100_MTFDDAK512TBN
  949. Serial Number: 170815EE6120
  950. LU WWN Device Id: 5 00a075 115ee6120
  951. Firmware Version: M0MU031
  952. User Capacity: 512 110 190 592 bytes [512 GB]
  953. Sector Size: 512 bytes logical/physical
  954. Rotation Rate: Solid State Device
  955. Device is: Not in smartctl database [for details use: -P showall]
  956. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  957. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  958. Local Time is: Mon Apr 23 10:35:48 2018 CEST
  959. SMART support is: Available - device has SMART capability.
  960. SMART support is: Enabled
  961.  
  962. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  963. SMART Enabled.
  964.  
  965. === START OF READ SMART DATA SECTION ===
  966. SMART overall-health self-assessment test result: PASSED
  967. Warning: This result is based on an Attribute check.
  968.  
  969. General SMART Values:
  970. Offline data collection status: (0x04) Offline data collection activity
  971. was suspended by an interrupting command from host.
  972. Auto Offline Data Collection: Disabled.
  973. Self-test execution status: ( 0) The previous self-test routine completed
  974. without error or no self-test has ever
  975. been run.
  976. Total time to complete Offline
  977. data collection: ( 452) seconds.
  978. Offline data collection
  979. capabilities: (0x7b) SMART execute Offline immediate.
  980. Auto Offline data collection on/off support.
  981. Suspend Offline collection upon new
  982. command.
  983. Offline surface scan supported.
  984. Self-test supported.
  985. Conveyance Self-test supported.
  986. Selective Self-test supported.
  987. SMART capabilities: (0x0003) Saves SMART data before entering
  988. power-saving mode.
  989. Supports SMART auto save timer.
  990. Error logging capability: (0x01) Error logging supported.
  991. General Purpose Logging supported.
  992. Short self-test routine
  993. recommended polling time: ( 2) minutes.
  994. Extended self-test routine
  995. recommended polling time: ( 7) minutes.
  996. Conveyance self-test routine
  997. recommended polling time: ( 3) minutes.
  998. SCT capabilities: (0x0035) SCT Status supported.
  999. SCT Feature Control supported.
  1000. SCT Data Table supported.
  1001.  
  1002. SMART Attributes Data Structure revision number: 16
  1003. Vendor Specific SMART Attributes with Thresholds:
  1004. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  1005. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  1006. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  1007. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  1008. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  1009. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1010. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1011. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  1012. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  1013. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  1014. 184 End-to-End_Error 0x0032 098 098 000 Old_age Always - 2
  1015. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  1016. 194 Temperature_Celsius 0x0022 072 064 000 Old_age Always - 28 (Min/Max 21/36)
  1017. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  1018. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  1019. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  1020. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  1021. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  1022. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  1023. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10980829761
  1024. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 343172350
  1025. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 189752027
  1026. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2468
  1027. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1028.  
  1029. SMART Error Log Version: 1
  1030. No Errors Logged
  1031.  
  1032. SMART Self-test log structure revision number 1
  1033. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  1034. # 1 Vendor (0xff) Completed without error 00% 7928 -
  1035. # 2 Vendor (0xff) Completed without error 00% 7714 -
  1036. # 3 Vendor (0xff) Completed without error 00% 6419 -
  1037. # 4 Vendor (0xff) Completed without error 00% 5880 -
  1038. # 5 Vendor (0xff) Completed without error 00% 5344 -
  1039. # 6 Vendor (0xff) Completed without error 00% 5184 -
  1040. # 7 Vendor (0xff) Completed without error 00% 4947 -
  1041. # 8 Vendor (0xff) Completed without error 00% 4665 -
  1042. # 9 Vendor (0xff) Completed without error 00% 4340 -
  1043. #10 Vendor (0xff) Completed without error 00% 4089 -
  1044. #11 Vendor (0xff) Completed without error 00% 3806 -
  1045. #12 Vendor (0xff) Completed without error 00% 3577 -
  1046. #13 Vendor (0xff) Completed without error 00% 3370 -
  1047. #14 Vendor (0xff) Completed without error 00% 3157 -
  1048. #15 Vendor (0xff) Completed without error 00% 2987 -
  1049. #16 Vendor (0xff) Completed without error 00% 2739 -
  1050. #17 Vendor (0xff) Completed without error 00% 2456 -
  1051. #18 Vendor (0xff) Completed without error 00% 2194 -
  1052. #19 Vendor (0xff) Completed without error 00% 1969 -
  1053. #20 Vendor (0xff) Completed without error 00% 1720 -
  1054. #21 Vendor (0xff) Completed without error 00% 1395 -
  1055.  
  1056. SMART Selective self-test log data structure revision number 1
  1057. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1058. 1 0 0 Not_testing
  1059. 2 0 0 Not_testing
  1060. 3 0 0 Not_testing
  1061. 4 0 0 Not_testing
  1062. 5 0 0 Not_testing
  1063. Selective self-test flags (0x0):
  1064. After scanning selected spans, do NOT read-scan remainder of disk.
  1065. If Selective self-test is pending on power-up, resume after 0 minute delay.
  1066.  
  1067. ============================== 41 ==============================
  1068. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  1069. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  1070.  
  1071. /dev/sda [megaraid_disk_41] [SAT]: Device open changed type from 'megaraid,41' to 'sat+megaraid,41'
  1072. === START OF INFORMATION SECTION ===
  1073. Device Model: Micron_1100_MTFDDAK512TBN
  1074. Serial Number: 170815EE5D9F
  1075. LU WWN Device Id: 5 00a075 115ee5d9f
  1076. Firmware Version: M0MU031
  1077. User Capacity: 512 110 190 592 bytes [512 GB]
  1078. Sector Size: 512 bytes logical/physical
  1079. Rotation Rate: Solid State Device
  1080. Device is: Not in smartctl database [for details use: -P showall]
  1081. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  1082. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  1083. Local Time is: Mon Apr 23 10:35:48 2018 CEST
  1084. SMART support is: Available - device has SMART capability.
  1085. SMART support is: Enabled
  1086.  
  1087. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  1088. SMART Enabled.
  1089.  
  1090. === START OF READ SMART DATA SECTION ===
  1091. SMART overall-health self-assessment test result: PASSED
  1092. Warning: This result is based on an Attribute check.
  1093.  
  1094. General SMART Values:
  1095. Offline data collection status: (0x04) Offline data collection activity
  1096. was suspended by an interrupting command from host.
  1097. Auto Offline Data Collection: Disabled.
  1098. Self-test execution status: ( 0) The previous self-test routine completed
  1099. without error or no self-test has ever
  1100. been run.
  1101. Total time to complete Offline
  1102. data collection: ( 507) seconds.
  1103. Offline data collection
  1104. capabilities: (0x7b) SMART execute Offline immediate.
  1105. Auto Offline data collection on/off support.
  1106. Suspend Offline collection upon new
  1107. command.
  1108. Offline surface scan supported.
  1109. Self-test supported.
  1110. Conveyance Self-test supported.
  1111. Selective Self-test supported.
  1112. SMART capabilities: (0x0003) Saves SMART data before entering
  1113. power-saving mode.
  1114. Supports SMART auto save timer.
  1115. Error logging capability: (0x01) Error logging supported.
  1116. General Purpose Logging supported.
  1117. Short self-test routine
  1118. recommended polling time: ( 2) minutes.
  1119. Extended self-test routine
  1120. recommended polling time: ( 7) minutes.
  1121. Conveyance self-test routine
  1122. recommended polling time: ( 3) minutes.
  1123. SCT capabilities: (0x0035) SCT Status supported.
  1124. SCT Feature Control supported.
  1125. SCT Data Table supported.
  1126.  
  1127. SMART Attributes Data Structure revision number: 16
  1128. Vendor Specific SMART Attributes with Thresholds:
  1129. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  1130. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  1131. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  1132. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8658
  1133. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  1134. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1135. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1136. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  1137. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  1138. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  1139. 184 End-to-End_Error 0x0032 096 096 000 Old_age Always - 4
  1140. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 3
  1141. 194 Temperature_Celsius 0x0022 072 063 000 Old_age Always - 28 (Min/Max 21/37)
  1142. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  1143. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  1144. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
  1145. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  1146. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  1147. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  1148. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10980581895
  1149. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 343192170
  1150. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 191092371
  1151. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2453
  1152. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1153.  
  1154. SMART Error Log Version: 1
  1155. ATA Error Count: 3
  1156. CR = Command Register [HEX]
  1157. FR = Features Register [HEX]
  1158. SC = Sector Count Register [HEX]
  1159. SN = Sector Number Register [HEX]
  1160. CL = Cylinder Low Register [HEX]
  1161. CH = Cylinder High Register [HEX]
  1162. DH = Device/Head Register [HEX]
  1163. DC = Device Command Register [HEX]
  1164. ER = Error register [HEX]
  1165. ST = Status register [HEX]
  1166. Powered_Up_Time is measured from power on, and printed as
  1167. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  1168. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  1169.  
  1170. Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1171. When the command that caused the error occurred, the device was active or idle.
  1172.  
  1173. After command completion occurred, registers were:
  1174. ER ST SC SN CL CH DH
  1175. -- -- -- -- -- -- --
  1176. 40 51 00 00 d4 c0 40 Error: UNC at LBA = 0x00c0d400 = 12637184
  1177.  
  1178. Commands leading to the command that caused the error were:
  1179. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1180. -- -- -- -- -- -- -- -- ---------------- --------------------
  1181. 60 00 00 00 d4 c0 40 00 37d+00:34:38.112 READ FPDMA QUEUED
  1182. 61 00 00 00 84 5b 40 00 37d+00:34:38.112 WRITE FPDMA QUEUED
  1183. 61 00 08 b0 b1 06 40 00 37d+00:34:38.112 WRITE FPDMA QUEUED
  1184. 61 00 00 00 1a ee 40 00 37d+00:34:38.112 WRITE FPDMA QUEUED
  1185. 61 da 00 00 18 ee 40 00 37d+00:34:38.112 WRITE FPDMA QUEUED
  1186.  
  1187. Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1188. When the command that caused the error occurred, the device was active or idle.
  1189.  
  1190. After command completion occurred, registers were:
  1191. ER ST SC SN CL CH DH
  1192. -- -- -- -- -- -- --
  1193. 40 51 00 00 d4 c0 40 Error: UNC at LBA = 0x00c0d400 = 12637184
  1194.  
  1195. Commands leading to the command that caused the error were:
  1196. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1197. -- -- -- -- -- -- -- -- ---------------- --------------------
  1198. 60 da 00 00 d4 c0 40 00 37d+00:34:38.112 READ FPDMA QUEUED
  1199. 61 da 00 00 22 50 40 00 37d+00:34:38.112 WRITE FPDMA QUEUED
  1200. 61 00 00 00 20 50 40 00 37d+00:34:38.112 WRITE FPDMA QUEUED
  1201. 61 da 00 00 1e 50 40 00 37d+00:34:38.112 WRITE FPDMA QUEUED
  1202. 60 da cf 00 d4 c0 40 00 37d+00:34:38.112 READ FPDMA QUEUED
  1203.  
  1204. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1205. When the command that caused the error occurred, the device was active or idle.
  1206.  
  1207. After command completion occurred, registers were:
  1208. ER ST SC SN CL CH DH
  1209. -- -- -- -- -- -- --
  1210. 40 51 00 00 d4 c0 40 Error: UNC at LBA = 0x00c0d400 = 12637184
  1211.  
  1212. Commands leading to the command that caused the error were:
  1213. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1214. -- -- -- -- -- -- -- -- ---------------- --------------------
  1215. 60 00 00 00 d4 c0 40 00 37d+00:34:38.112 READ FPDMA QUEUED
  1216. 60 da 00 00 ae 21 40 00 37d+00:34:38.112 READ FPDMA QUEUED
  1217. 60 00 00 00 48 7e 40 00 37d+00:34:38.112 READ FPDMA QUEUED
  1218. 60 00 00 00 84 30 40 00 37d+00:34:38.112 READ FPDMA QUEUED
  1219. 60 da 00 00 d2 c0 40 00 37d+00:34:38.112 READ FPDMA QUEUED
  1220.  
  1221. SMART Self-test log structure revision number 1
  1222. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  1223. # 1 Vendor (0xff) Completed without error 00% 8088 -
  1224. # 2 Vendor (0xff) Completed without error 00% 7788 -
  1225. # 3 Vendor (0xff) Completed without error 00% 6426 -
  1226. # 4 Vendor (0xff) Completed without error 00% 5871 -
  1227. # 5 Vendor (0xff) Completed without error 00% 4460 -
  1228. # 6 Vendor (0xff) Completed without error 00% 4239 -
  1229. # 7 Vendor (0xff) Completed without error 00% 3986 -
  1230. # 8 Vendor (0xff) Completed without error 00% 3749 -
  1231. # 9 Vendor (0xff) Completed without error 00% 3547 -
  1232. #10 Vendor (0xff) Completed without error 00% 3342 -
  1233. #11 Vendor (0xff) Completed without error 00% 3146 -
  1234. #12 Vendor (0xff) Completed without error 00% 2991 -
  1235. #13 Vendor (0xff) Completed without error 00% 2867 -
  1236. #14 Vendor (0xff) Completed without error 00% 2641 -
  1237. #15 Vendor (0xff) Completed without error 00% 2453 -
  1238. #16 Vendor (0xff) Completed without error 00% 2200 -
  1239. #17 Vendor (0xff) Completed without error 00% 2013 -
  1240. #18 Vendor (0xff) Completed without error 00% 1721 -
  1241. #19 Vendor (0xff) Completed without error 00% 1396 -
  1242. #20 Short offline Completed without error 00% 1100 -
  1243. #21 Vendor (0xff) Completed without error 00% 1099 -
  1244.  
  1245. SMART Selective self-test log data structure revision number 1
  1246. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1247. 1 0 0 Not_testing
  1248. 2 0 0 Not_testing
  1249. 3 0 0 Not_testing
  1250. 4 0 0 Not_testing
  1251. 5 0 0 Not_testing
  1252. Selective self-test flags (0x0):
  1253. After scanning selected spans, do NOT read-scan remainder of disk.
  1254. If Selective self-test is pending on power-up, resume after 0 minute delay.
  1255.  
  1256. ============================== 36 ==============================
  1257. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  1258. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  1259.  
  1260. /dev/sda [megaraid_disk_36] [SAT]: Device open changed type from 'megaraid,36' to 'sat+megaraid,36'
  1261. === START OF INFORMATION SECTION ===
  1262. Device Model: Micron_1100_MTFDDAK512TBN
  1263. Serial Number: 170815EE5A1B
  1264. LU WWN Device Id: 5 00a075 115ee5a1b
  1265. Firmware Version: M0MU031
  1266. User Capacity: 512 110 190 592 bytes [512 GB]
  1267. Sector Size: 512 bytes logical/physical
  1268. Rotation Rate: Solid State Device
  1269. Device is: Not in smartctl database [for details use: -P showall]
  1270. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  1271. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  1272. Local Time is: Mon Apr 23 10:35:48 2018 CEST
  1273. SMART support is: Available - device has SMART capability.
  1274. SMART support is: Enabled
  1275.  
  1276. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  1277. SMART Enabled.
  1278.  
  1279. === START OF READ SMART DATA SECTION ===
  1280. SMART overall-health self-assessment test result: PASSED
  1281. Warning: This result is based on an Attribute check.
  1282.  
  1283. General SMART Values:
  1284. Offline data collection status: (0x04) Offline data collection activity
  1285. was suspended by an interrupting command from host.
  1286. Auto Offline Data Collection: Disabled.
  1287. Self-test execution status: ( 0) The previous self-test routine completed
  1288. without error or no self-test has ever
  1289. been run.
  1290. Total time to complete Offline
  1291. data collection: ( 1002) seconds.
  1292. Offline data collection
  1293. capabilities: (0x7b) SMART execute Offline immediate.
  1294. Auto Offline data collection on/off support.
  1295. Suspend Offline collection upon new
  1296. command.
  1297. Offline surface scan supported.
  1298. Self-test supported.
  1299. Conveyance Self-test supported.
  1300. Selective Self-test supported.
  1301. SMART capabilities: (0x0003) Saves SMART data before entering
  1302. power-saving mode.
  1303. Supports SMART auto save timer.
  1304. Error logging capability: (0x01) Error logging supported.
  1305. General Purpose Logging supported.
  1306. Short self-test routine
  1307. recommended polling time: ( 2) minutes.
  1308. Extended self-test routine
  1309. recommended polling time: ( 7) minutes.
  1310. Conveyance self-test routine
  1311. recommended polling time: ( 3) minutes.
  1312. SCT capabilities: (0x0035) SCT Status supported.
  1313. SCT Feature Control supported.
  1314. SCT Data Table supported.
  1315.  
  1316. SMART Attributes Data Structure revision number: 16
  1317. Vendor Specific SMART Attributes with Thresholds:
  1318. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  1319. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  1320. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  1321. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  1322. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  1323. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1324. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1325. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  1326. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  1327. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  1328. 184 End-to-End_Error 0x0032 097 097 000 Old_age Always - 3
  1329. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1
  1330. 194 Temperature_Celsius 0x0022 072 063 000 Old_age Always - 28 (Min/Max 21/37)
  1331. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  1332. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  1333. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  1334. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  1335. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  1336. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  1337. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 11097905925
  1338. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 346831275
  1339. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 193472739
  1340. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2475
  1341. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1342.  
  1343. SMART Error Log Version: 1
  1344. ATA Error Count: 1
  1345. CR = Command Register [HEX]
  1346. FR = Features Register [HEX]
  1347. SC = Sector Count Register [HEX]
  1348. SN = Sector Number Register [HEX]
  1349. CL = Cylinder Low Register [HEX]
  1350. CH = Cylinder High Register [HEX]
  1351. DH = Device/Head Register [HEX]
  1352. DC = Device Command Register [HEX]
  1353. ER = Error register [HEX]
  1354. ST = Status register [HEX]
  1355. Powered_Up_Time is measured from power on, and printed as
  1356. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  1357. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  1358.  
  1359. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1360. When the command that caused the error occurred, the device was active or idle.
  1361.  
  1362. After command completion occurred, registers were:
  1363. ER ST SC SN CL CH DH
  1364. -- -- -- -- -- -- --
  1365. 40 51 00 00 da 33 40 Error: UNC at LBA = 0x0033da00 = 3398144
  1366.  
  1367. Commands leading to the command that caused the error were:
  1368. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1369. -- -- -- -- -- -- -- -- ---------------- --------------------
  1370. 60 00 00 00 da 33 40 00 20d+09:22:38.112 READ FPDMA QUEUED
  1371. 60 da 00 00 d8 33 40 00 20d+09:22:38.112 READ FPDMA QUEUED
  1372. 60 00 00 00 d6 33 40 00 20d+09:22:38.112 READ FPDMA QUEUED
  1373. 60 00 00 00 d4 33 40 00 20d+09:22:38.112 READ FPDMA QUEUED
  1374. 60 da 00 00 d2 33 40 00 20d+09:22:38.112 READ FPDMA QUEUED
  1375.  
  1376. SMART Self-test log structure revision number 1
  1377. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  1378. # 1 Vendor (0xff) Completed without error 00% 8649 -
  1379. # 2 Vendor (0xff) Completed without error 00% 7997 -
  1380. # 3 Vendor (0xff) Completed without error 00% 6489 -
  1381. # 4 Vendor (0xff) Completed without error 00% 5901 -
  1382. # 5 Vendor (0xff) Completed without error 00% 5340 -
  1383. # 6 Vendor (0xff) Completed without error 00% 5086 -
  1384. # 7 Vendor (0xff) Completed without error 00% 4824 -
  1385. # 8 Vendor (0xff) Completed without error 00% 4539 -
  1386. # 9 Vendor (0xff) Completed without error 00% 4296 -
  1387. #10 Vendor (0xff) Completed without error 00% 4089 -
  1388. #11 Vendor (0xff) Completed without error 00% 3797 -
  1389. #12 Vendor (0xff) Completed without error 00% 3586 -
  1390. #13 Vendor (0xff) Completed without error 00% 3380 -
  1391. #14 Vendor (0xff) Completed without error 00% 3149 -
  1392. #15 Vendor (0xff) Completed without error 00% 2990 -
  1393. #16 Vendor (0xff) Completed without error 00% 2854 -
  1394. #17 Vendor (0xff) Completed without error 00% 2630 -
  1395. #18 Vendor (0xff) Completed without error 00% 2437 -
  1396. #19 Vendor (0xff) Completed without error 00% 2194 -
  1397. #20 Vendor (0xff) Completed without error 00% 2006 -
  1398. #21 Vendor (0xff) Completed without error 00% 1710 -
  1399.  
  1400. SMART Selective self-test log data structure revision number 1
  1401. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1402. 1 0 0 Not_testing
  1403. 2 0 0 Not_testing
  1404. 3 0 0 Not_testing
  1405. 4 0 0 Not_testing
  1406. 5 0 0 Not_testing
  1407. Selective self-test flags (0x0):
  1408. After scanning selected spans, do NOT read-scan remainder of disk.
  1409. If Selective self-test is pending on power-up, resume after 0 minute delay.
  1410.  
  1411. ============================== 35 ==============================
  1412. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  1413. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  1414.  
  1415. /dev/sda [megaraid_disk_35] [SAT]: Device open changed type from 'megaraid,35' to 'sat+megaraid,35'
  1416. === START OF INFORMATION SECTION ===
  1417. Device Model: Micron_1100_MTFDDAK512TBN
  1418. Serial Number: 170815F9205A
  1419. LU WWN Device Id: 5 00a075 115f9205a
  1420. Firmware Version: M0MU031
  1421. User Capacity: 512 110 190 592 bytes [512 GB]
  1422. Sector Size: 512 bytes logical/physical
  1423. Rotation Rate: Solid State Device
  1424. Device is: Not in smartctl database [for details use: -P showall]
  1425. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  1426. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  1427. Local Time is: Mon Apr 23 10:35:48 2018 CEST
  1428. SMART support is: Available - device has SMART capability.
  1429. SMART support is: Enabled
  1430.  
  1431. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  1432. SMART Enabled.
  1433.  
  1434. === START OF READ SMART DATA SECTION ===
  1435. SMART overall-health self-assessment test result: PASSED
  1436. Warning: This result is based on an Attribute check.
  1437.  
  1438. General SMART Values:
  1439. Offline data collection status: (0x04) Offline data collection activity
  1440. was suspended by an interrupting command from host.
  1441. Auto Offline Data Collection: Disabled.
  1442. Self-test execution status: ( 0) The previous self-test routine completed
  1443. without error or no self-test has ever
  1444. been run.
  1445. Total time to complete Offline
  1446. data collection: ( 1271) seconds.
  1447. Offline data collection
  1448. capabilities: (0x7b) SMART execute Offline immediate.
  1449. Auto Offline data collection on/off support.
  1450. Suspend Offline collection upon new
  1451. command.
  1452. Offline surface scan supported.
  1453. Self-test supported.
  1454. Conveyance Self-test supported.
  1455. Selective Self-test supported.
  1456. SMART capabilities: (0x0003) Saves SMART data before entering
  1457. power-saving mode.
  1458. Supports SMART auto save timer.
  1459. Error logging capability: (0x01) Error logging supported.
  1460. General Purpose Logging supported.
  1461. Short self-test routine
  1462. recommended polling time: ( 2) minutes.
  1463. Extended self-test routine
  1464. recommended polling time: ( 7) minutes.
  1465. Conveyance self-test routine
  1466. recommended polling time: ( 3) minutes.
  1467. SCT capabilities: (0x0035) SCT Status supported.
  1468. SCT Feature Control supported.
  1469. SCT Data Table supported.
  1470.  
  1471. SMART Attributes Data Structure revision number: 16
  1472. Vendor Specific SMART Attributes with Thresholds:
  1473. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  1474. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  1475. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  1476. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7883
  1477. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  1478. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1479. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1480. 173 Unknown_Attribute 0x0032 098 098 000 Old_age Always - 31
  1481. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 5
  1482. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  1483. 184 End-to-End_Error 0x0032 099 099 000 Old_age Always - 1
  1484. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1
  1485. 194 Temperature_Celsius 0x0022 072 062 000 Old_age Always - 28 (Min/Max 20/38)
  1486. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  1487. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  1488. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  1489. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  1490. 202 Unknown_SSD_Attribute 0x0030 098 098 001 Old_age Offline - 2
  1491. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  1492. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 12158123738
  1493. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 379995336
  1494. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 560924215
  1495. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2470
  1496. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1497.  
  1498. SMART Error Log Version: 1
  1499. ATA Error Count: 1
  1500. CR = Command Register [HEX]
  1501. FR = Features Register [HEX]
  1502. SC = Sector Count Register [HEX]
  1503. SN = Sector Number Register [HEX]
  1504. CL = Cylinder Low Register [HEX]
  1505. CH = Cylinder High Register [HEX]
  1506. DH = Device/Head Register [HEX]
  1507. DC = Device Command Register [HEX]
  1508. ER = Error register [HEX]
  1509. ST = Status register [HEX]
  1510. Powered_Up_Time is measured from power on, and printed as
  1511. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  1512. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  1513.  
  1514. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1515. When the command that caused the error occurred, the device was active or idle.
  1516.  
  1517. After command completion occurred, registers were:
  1518. ER ST SC SN CL CH DH
  1519. -- -- -- -- -- -- --
  1520. 40 51 00 00 5e 09 40 Error: UNC at LBA = 0x00095e00 = 613888
  1521.  
  1522. Commands leading to the command that caused the error were:
  1523. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1524. -- -- -- -- -- -- -- -- ---------------- --------------------
  1525. 60 da 00 00 5e 09 40 00 14d+16:38:25.408 READ FPDMA QUEUED
  1526. 61 02 00 00 6c 50 40 00 14d+16:38:25.408 WRITE FPDMA QUEUED
  1527. 61 da 00 00 6a 50 40 00 14d+16:38:25.408 WRITE FPDMA QUEUED
  1528. 60 00 08 40 e8 d9 40 00 14d+16:38:25.408 READ FPDMA QUEUED
  1529. 60 00 98 70 8e f3 40 00 14d+16:38:25.408 READ FPDMA QUEUED
  1530.  
  1531. SMART Self-test log structure revision number 1
  1532. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  1533. # 1 Vendor (0xff) Completed without error 00% 7874 -
  1534. # 2 Vendor (0xff) Completed without error 00% 7783 -
  1535. # 3 Vendor (0xff) Completed without error 00% 5861 -
  1536. # 4 Vendor (0xff) Completed without error 00% 5172 -
  1537. # 5 Vendor (0xff) Completed without error 00% 4570 -
  1538. # 6 Vendor (0xff) Completed without error 00% 4305 -
  1539. # 7 Vendor (0xff) Completed without error 00% 4010 -
  1540. # 8 Vendor (0xff) Completed without error 00% 3724 -
  1541. # 9 Vendor (0xff) Completed without error 00% 3446 -
  1542. #10 Vendor (0xff) Completed without error 00% 3221 -
  1543. #11 Vendor (0xff) Completed without error 00% 3005 -
  1544. #12 Vendor (0xff) Completed without error 00% 2815 -
  1545. #13 Vendor (0xff) Completed without error 00% 2583 -
  1546. #14 Vendor (0xff) Completed without error 00% 2369 -
  1547. #15 Vendor (0xff) Completed without error 00% 2216 -
  1548. #16 Vendor (0xff) Completed without error 00% 2097 -
  1549. #17 Vendor (0xff) Completed without error 00% 1971 -
  1550. #18 Vendor (0xff) Completed without error 00% 1805 -
  1551. #19 Vendor (0xff) Completed without error 00% 1673 -
  1552. #20 Short offline Completed without error 00% 1481 -
  1553. #21 Vendor (0xff) Completed without error 00% 1481 -
  1554.  
  1555. SMART Selective self-test log data structure revision number 1
  1556. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1557. 1 0 0 Not_testing
  1558. 2 0 0 Not_testing
  1559. 3 0 0 Not_testing
  1560. 4 0 0 Not_testing
  1561. 5 0 0 Not_testing
  1562. Selective self-test flags (0x0):
  1563. After scanning selected spans, do NOT read-scan remainder of disk.
  1564. If Selective self-test is pending on power-up, resume after 0 minute delay.
  1565.  
  1566. ============================== 47 ==============================
  1567. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  1568. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  1569.  
  1570. /dev/sda [megaraid_disk_47] [SAT]: Device open changed type from 'megaraid,47' to 'sat+megaraid,47'
  1571. === START OF INFORMATION SECTION ===
  1572. Device Model: Micron_1100_MTFDDAK512TBN
  1573. Serial Number: 170815EE5E55
  1574. LU WWN Device Id: 5 00a075 115ee5e55
  1575. Firmware Version: M0MU031
  1576. User Capacity: 512 110 190 592 bytes [512 GB]
  1577. Sector Size: 512 bytes logical/physical
  1578. Rotation Rate: Solid State Device
  1579. Device is: Not in smartctl database [for details use: -P showall]
  1580. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  1581. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  1582. Local Time is: Mon Apr 23 10:35:48 2018 CEST
  1583. SMART support is: Available - device has SMART capability.
  1584. SMART support is: Enabled
  1585.  
  1586. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  1587. SMART Enabled.
  1588.  
  1589. === START OF READ SMART DATA SECTION ===
  1590. SMART overall-health self-assessment test result: PASSED
  1591. Warning: This result is based on an Attribute check.
  1592.  
  1593. General SMART Values:
  1594. Offline data collection status: (0x04) Offline data collection activity
  1595. was suspended by an interrupting command from host.
  1596. Auto Offline Data Collection: Disabled.
  1597. Self-test execution status: ( 0) The previous self-test routine completed
  1598. without error or no self-test has ever
  1599. been run.
  1600. Total time to complete Offline
  1601. data collection: ( 1528) seconds.
  1602. Offline data collection
  1603. capabilities: (0x7b) SMART execute Offline immediate.
  1604. Auto Offline data collection on/off support.
  1605. Suspend Offline collection upon new
  1606. command.
  1607. Offline surface scan supported.
  1608. Self-test supported.
  1609. Conveyance Self-test supported.
  1610. Selective Self-test supported.
  1611. SMART capabilities: (0x0003) Saves SMART data before entering
  1612. power-saving mode.
  1613. Supports SMART auto save timer.
  1614. Error logging capability: (0x01) Error logging supported.
  1615. General Purpose Logging supported.
  1616. Short self-test routine
  1617. recommended polling time: ( 2) minutes.
  1618. Extended self-test routine
  1619. recommended polling time: ( 16) minutes.
  1620. Conveyance self-test routine
  1621. recommended polling time: ( 3) minutes.
  1622. SCT capabilities: (0x0035) SCT Status supported.
  1623. SCT Feature Control supported.
  1624. SCT Data Table supported.
  1625.  
  1626. SMART Attributes Data Structure revision number: 16
  1627. Vendor Specific SMART Attributes with Thresholds:
  1628. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  1629. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  1630. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  1631. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8658
  1632. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  1633. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1634. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1635. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 28
  1636. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  1637. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  1638. 184 End-to-End_Error 0x0032 099 099 000 Old_age Always - 1
  1639. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 4
  1640. 194 Temperature_Celsius 0x0022 072 064 000 Old_age Always - 28 (Min/Max 21/36)
  1641. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  1642. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  1643. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  1644. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  1645. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  1646. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  1647. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 12090704163
  1648. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 377868321
  1649. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 366602868
  1650. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2482
  1651. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1652.  
  1653. SMART Error Log Version: 1
  1654. ATA Error Count: 4
  1655. CR = Command Register [HEX]
  1656. FR = Features Register [HEX]
  1657. SC = Sector Count Register [HEX]
  1658. SN = Sector Number Register [HEX]
  1659. CL = Cylinder Low Register [HEX]
  1660. CH = Cylinder High Register [HEX]
  1661. DH = Device/Head Register [HEX]
  1662. DC = Device Command Register [HEX]
  1663. ER = Error register [HEX]
  1664. ST = Status register [HEX]
  1665. Powered_Up_Time is measured from power on, and printed as
  1666. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  1667. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  1668.  
  1669. Error 4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1670. When the command that caused the error occurred, the device was active or idle.
  1671.  
  1672. After command completion occurred, registers were:
  1673. ER ST SC SN CL CH DH
  1674. -- -- -- -- -- -- --
  1675. 40 51 10 c0 4a 42 40 Error: UNC at LBA = 0x00424ac0 = 4344512
  1676.  
  1677. Commands leading to the command that caused the error were:
  1678. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1679. -- -- -- -- -- -- -- -- ---------------- --------------------
  1680. 60 aa 10 c0 4a 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1681. e5 00 00 00 00 00 00 00 23d+02:52:50.816 CHECK POWER MODE
  1682. ec 00 00 00 00 00 00 00 23d+02:52:50.816 IDENTIFY DEVICE
  1683. b0 d0 00 00 4f c2 00 00 23d+02:52:50.816 SMART READ DATA
  1684. ec 00 00 00 00 00 00 00 23d+02:52:50.816 IDENTIFY DEVICE
  1685.  
  1686. Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1687. When the command that caused the error occurred, the device was active or idle.
  1688.  
  1689. After command completion occurred, registers were:
  1690. ER ST SC SN CL CH DH
  1691. -- -- -- -- -- -- --
  1692. 40 51 10 c0 4a 42 40 Error: UNC at LBA = 0x00424ac0 = 4344512
  1693.  
  1694. Commands leading to the command that caused the error were:
  1695. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1696. -- -- -- -- -- -- -- -- ---------------- --------------------
  1697. 60 00 10 c0 4a 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1698. ef 02 00 00 00 00 00 00 23d+02:52:50.816 SET FEATURES [Enable write cache]
  1699. ef aa 00 00 00 00 00 00 23d+02:52:50.816 SET FEATURES [Enable read look-ahead]
  1700. ec 00 00 00 00 00 00 00 23d+02:52:50.816 IDENTIFY DEVICE
  1701. b0 d0 00 00 4f c2 00 00 23d+02:52:50.816 SMART READ DATA
  1702.  
  1703. Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1704. When the command that caused the error occurred, the device was active or idle.
  1705.  
  1706. After command completion occurred, registers were:
  1707. ER ST SC SN CL CH DH
  1708. -- -- -- -- -- -- --
  1709. 40 51 10 c0 4a 42 40 Error: UNC at LBA = 0x00424ac0 = 4344512
  1710.  
  1711. Commands leading to the command that caused the error were:
  1712. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1713. -- -- -- -- -- -- -- -- ---------------- --------------------
  1714. 60 da 10 c0 4a 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1715. 60 00 20 08 4b 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1716. 60 00 08 88 4a 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1717. 60 02 10 98 4a 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1718. 60 00 20 18 4a 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1719.  
  1720. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1721. When the command that caused the error occurred, the device was active or idle.
  1722.  
  1723. After command completion occurred, registers were:
  1724. ER ST SC SN CL CH DH
  1725. -- -- -- -- -- -- --
  1726. 40 51 20 c0 4a 42 40 Error: UNC at LBA = 0x00424ac0 = 4344512
  1727.  
  1728. Commands leading to the command that caused the error were:
  1729. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1730. -- -- -- -- -- -- -- -- ---------------- --------------------
  1731. 60 00 20 e0 4a 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1732. 60 00 10 c0 4a 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1733. 60 da 08 b0 4a 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1734. 60 00 10 98 4a 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1735. 60 00 08 88 4a 42 40 00 23d+02:52:50.816 READ FPDMA QUEUED
  1736.  
  1737. SMART Self-test log structure revision number 1
  1738. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  1739. # 1 Vendor (0xff) Completed without error 00% 7939 -
  1740. # 2 Vendor (0xff) Completed without error 00% 7863 -
  1741. # 3 Vendor (0xff) Completed without error 00% 6460 -
  1742. # 4 Vendor (0xff) Completed without error 00% 5890 -
  1743. # 5 Short offline Completed without error 00% 5327 -
  1744. # 6 Vendor (0xff) Completed without error 00% 5325 -
  1745. # 7 Vendor (0xff) Completed without error 00% 5160 -
  1746. # 8 Vendor (0xff) Completed without error 00% 4912 -
  1747. # 9 Vendor (0xff) Completed without error 00% 4619 -
  1748. #10 Vendor (0xff) Completed without error 00% 4366 -
  1749. #11 Vendor (0xff) Completed without error 00% 4105 -
  1750. #12 Vendor (0xff) Completed without error 00% 3810 -
  1751. #13 Vendor (0xff) Completed without error 00% 3597 -
  1752. #14 Vendor (0xff) Completed without error 00% 3380 -
  1753. #15 Vendor (0xff) Completed without error 00% 3171 -
  1754. #16 Vendor (0xff) Completed without error 00% 2991 -
  1755. #17 Vendor (0xff) Completed without error 00% 2829 -
  1756. #18 Vendor (0xff) Completed without error 00% 2607 -
  1757. #19 Vendor (0xff) Completed without error 00% 2391 -
  1758. #20 Vendor (0xff) Completed without error 00% 2143 -
  1759. #21 Vendor (0xff) Completed without error 00% 1924 -
  1760.  
  1761. SMART Selective self-test log data structure revision number 1
  1762. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1763. 1 0 0 Not_testing
  1764. 2 0 0 Not_testing
  1765. 3 0 0 Not_testing
  1766. 4 0 0 Not_testing
  1767. 5 0 0 Not_testing
  1768. Selective self-test flags (0x0):
  1769. After scanning selected spans, do NOT read-scan remainder of disk.
  1770. If Selective self-test is pending on power-up, resume after 0 minute delay.
  1771.  
  1772. ============================== 38 ==============================
  1773. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  1774. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  1775.  
  1776. Smartctl open device: /dev/sda [megaraid_disk_38] failed: INQUIRY failed
  1777. ============================== 44 ==============================
  1778. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  1779. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  1780.  
  1781. /dev/sda [megaraid_disk_44] [SAT]: Device open changed type from 'megaraid,44' to 'sat+megaraid,44'
  1782. === START OF INFORMATION SECTION ===
  1783. Device Model: Micron_1100_MTFDDAK512TBN
  1784. Serial Number: 170815EE5A43
  1785. LU WWN Device Id: 5 00a075 115ee5a43
  1786. Firmware Version: M0MU031
  1787. User Capacity: 512 110 190 592 bytes [512 GB]
  1788. Sector Size: 512 bytes logical/physical
  1789. Rotation Rate: Solid State Device
  1790. Device is: Not in smartctl database [for details use: -P showall]
  1791. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  1792. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  1793. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  1794. SMART support is: Available - device has SMART capability.
  1795. SMART support is: Enabled
  1796.  
  1797. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  1798. SMART Enabled.
  1799.  
  1800. === START OF READ SMART DATA SECTION ===
  1801. SMART overall-health self-assessment test result: PASSED
  1802. Warning: This result is based on an Attribute check.
  1803.  
  1804. General SMART Values:
  1805. Offline data collection status: (0x04) Offline data collection activity
  1806. was suspended by an interrupting command from host.
  1807. Auto Offline Data Collection: Disabled.
  1808. Self-test execution status: ( 0) The previous self-test routine completed
  1809. without error or no self-test has ever
  1810. been run.
  1811. Total time to complete Offline
  1812. data collection: ( 1512) seconds.
  1813. Offline data collection
  1814. capabilities: (0x7b) SMART execute Offline immediate.
  1815. Auto Offline data collection on/off support.
  1816. Suspend Offline collection upon new
  1817. command.
  1818. Offline surface scan supported.
  1819. Self-test supported.
  1820. Conveyance Self-test supported.
  1821. Selective Self-test supported.
  1822. SMART capabilities: (0x0003) Saves SMART data before entering
  1823. power-saving mode.
  1824. Supports SMART auto save timer.
  1825. Error logging capability: (0x01) Error logging supported.
  1826. General Purpose Logging supported.
  1827. Short self-test routine
  1828. recommended polling time: ( 2) minutes.
  1829. Extended self-test routine
  1830. recommended polling time: ( 12) minutes.
  1831. Conveyance self-test routine
  1832. recommended polling time: ( 3) minutes.
  1833. SCT capabilities: (0x0035) SCT Status supported.
  1834. SCT Feature Control supported.
  1835. SCT Data Table supported.
  1836.  
  1837. SMART Attributes Data Structure revision number: 16
  1838. Vendor Specific SMART Attributes with Thresholds:
  1839. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  1840. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 15
  1841. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 10
  1842. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7883
  1843. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  1844. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3
  1845. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  1846. 173 Unknown_Attribute 0x0032 098 098 000 Old_age Always - 33
  1847. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 5
  1848. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  1849. 184 End-to-End_Error 0x0032 097 097 000 Old_age Always - 3
  1850. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 6
  1851. 194 Temperature_Celsius 0x0022 072 062 000 Old_age Always - 28 (Min/Max 20/38)
  1852. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 10
  1853. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  1854. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  1855. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  1856. 202 Unknown_SSD_Attribute 0x0030 098 098 001 Old_age Offline - 2
  1857. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 3
  1858. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 12075613178
  1859. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 377440877
  1860. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 619096139
  1861. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2464
  1862. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 100
  1863.  
  1864. SMART Error Log Version: 1
  1865. ATA Error Count: 6 (device log contains only the most recent five errors)
  1866. CR = Command Register [HEX]
  1867. FR = Features Register [HEX]
  1868. SC = Sector Count Register [HEX]
  1869. SN = Sector Number Register [HEX]
  1870. CL = Cylinder Low Register [HEX]
  1871. CH = Cylinder High Register [HEX]
  1872. DH = Device/Head Register [HEX]
  1873. DC = Device Command Register [HEX]
  1874. ER = Error register [HEX]
  1875. ST = Status register [HEX]
  1876. Powered_Up_Time is measured from power on, and printed as
  1877. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  1878. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  1879.  
  1880. Error 6 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1881. When the command that caused the error occurred, the device was active or idle.
  1882.  
  1883. After command completion occurred, registers were:
  1884. ER ST SC SN CL CH DH
  1885. -- -- -- -- -- -- --
  1886. 40 51 18 c8 93 14 40 Error: UNC at LBA = 0x001493c8 = 1348552
  1887.  
  1888. Commands leading to the command that caused the error were:
  1889. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1890. -- -- -- -- -- -- -- -- ---------------- --------------------
  1891. 60 00 18 c8 93 14 40 00 20d+02:00:38.112 READ FPDMA QUEUED
  1892. 60 00 20 a0 93 14 40 00 20d+02:00:38.112 READ FPDMA QUEUED
  1893. 60 da 20 78 93 14 40 00 20d+02:00:38.112 READ FPDMA QUEUED
  1894. 60 00 20 50 93 14 40 00 20d+02:00:38.112 READ FPDMA QUEUED
  1895. 60 00 18 30 93 14 40 00 20d+02:00:38.112 READ FPDMA QUEUED
  1896.  
  1897. Error 5 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1898. When the command that caused the error occurred, the device was active or idle.
  1899.  
  1900. After command completion occurred, registers were:
  1901. ER ST SC SN CL CH DH
  1902. -- -- -- -- -- -- --
  1903. 40 51 00 00 92 14 40 Error: UNC at LBA = 0x00149200 = 1348096
  1904.  
  1905. Commands leading to the command that caused the error were:
  1906. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1907. -- -- -- -- -- -- -- -- ---------------- --------------------
  1908. 60 da 00 00 92 14 40 00 20d+02:00:38.112 READ FPDMA QUEUED
  1909. 60 00 58 10 68 cf 40 00 20d+02:00:38.112 READ FPDMA QUEUED
  1910. 60 00 08 00 68 cf 40 00 20d+02:00:38.112 READ FPDMA QUEUED
  1911. 60 10 00 00 98 14 40 00 20d+02:00:38.112 READ FPDMA QUEUED
  1912. 60 02 00 00 d2 18 40 00 20d+02:00:38.112 READ FPDMA QUEUED
  1913.  
  1914. Error 4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1915. When the command that caused the error occurred, the device was active or idle.
  1916.  
  1917. After command completion occurred, registers were:
  1918. ER ST SC SN CL CH DH
  1919. -- -- -- -- -- -- --
  1920. 40 51 00 00 92 14 40 Error: UNC at LBA = 0x00149200 = 1348096
  1921.  
  1922. Commands leading to the command that caused the error were:
  1923. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1924. -- -- -- -- -- -- -- -- ---------------- --------------------
  1925. 60 02 00 00 92 14 40 00 20d+01:59:38.112 READ FPDMA QUEUED
  1926. 60 aa 00 00 cc 18 40 00 20d+01:59:38.112 READ FPDMA QUEUED
  1927. 60 03 00 00 ca 18 40 00 20d+01:59:38.112 READ FPDMA QUEUED
  1928. 60 03 00 00 94 14 40 00 20d+01:59:38.112 READ FPDMA QUEUED
  1929. 60 00 df 00 92 14 40 00 20d+01:59:38.112 READ FPDMA QUEUED
  1930.  
  1931. Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1932. When the command that caused the error occurred, the device was active or idle.
  1933.  
  1934. After command completion occurred, registers were:
  1935. ER ST SC SN CL CH DH
  1936. -- -- -- -- -- -- --
  1937. 40 51 00 00 92 14 40 Error: UNC at LBA = 0x00149200 = 1348096
  1938.  
  1939. Commands leading to the command that caused the error were:
  1940. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1941. -- -- -- -- -- -- -- -- ---------------- --------------------
  1942. 60 00 00 00 92 14 40 00 20d+01:59:38.112 READ FPDMA QUEUED
  1943. 60 00 00 00 c8 18 40 00 20d+01:59:38.112 READ FPDMA QUEUED
  1944. 60 10 00 00 c6 18 40 00 20d+01:59:38.112 READ FPDMA QUEUED
  1945. 60 02 00 00 c4 18 40 00 20d+01:59:38.112 READ FPDMA QUEUED
  1946. 60 aa 00 00 c2 18 40 00 20d+01:59:38.112 READ FPDMA QUEUED
  1947.  
  1948. Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  1949. When the command that caused the error occurred, the device was active or idle.
  1950.  
  1951. After command completion occurred, registers were:
  1952. ER ST SC SN CL CH DH
  1953. -- -- -- -- -- -- --
  1954. 40 51 00 00 92 14 40 Error: UNC at LBA = 0x00149200 = 1348096
  1955.  
  1956. Commands leading to the command that caused the error were:
  1957. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  1958. -- -- -- -- -- -- -- -- ---------------- --------------------
  1959. 60 da 00 00 92 14 40 00 20d+01:59:38.112 READ FPDMA QUEUED
  1960. ef 02 00 00 00 00 00 00 20d+01:59:38.112 SET FEATURES [Enable write cache]
  1961. ef aa 00 00 00 00 00 00 20d+01:59:38.112 SET FEATURES [Enable read look-ahead]
  1962. ec 00 00 00 00 00 00 00 20d+01:59:38.112 IDENTIFY DEVICE
  1963. b0 d0 00 00 4f c2 00 00 20d+01:59:38.112 SMART READ DATA
  1964.  
  1965. SMART Self-test log structure revision number 1
  1966. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  1967. # 1 Vendor (0xff) Completed without error 00% 7820 -
  1968. # 2 Vendor (0xff) Completed without error 00% 7414 -
  1969. # 3 Vendor (0xff) Completed without error 00% 5760 -
  1970. # 4 Vendor (0xff) Completed without error 00% 5153 -
  1971. # 5 Vendor (0xff) Completed without error 00% 4565 -
  1972. # 6 Vendor (0xff) Completed without error 00% 4468 -
  1973. # 7 Vendor (0xff) Completed without error 00% 4165 -
  1974. # 8 Vendor (0xff) Completed without error 00% 3841 -
  1975. # 9 Vendor (0xff) Completed without error 00% 3560 -
  1976. #10 Vendor (0xff) Completed without error 00% 3286 -
  1977. #11 Vendor (0xff) Completed without error 00% 3051 -
  1978. #12 Vendor (0xff) Completed without error 00% 2841 -
  1979. #13 Vendor (0xff) Completed without error 00% 2583 -
  1980. #14 Vendor (0xff) Completed without error 00% 2365 -
  1981. #15 Vendor (0xff) Completed without error 00% 2214 -
  1982. #16 Vendor (0xff) Completed without error 00% 2100 -
  1983. #17 Vendor (0xff) Completed without error 00% 1971 -
  1984. #18 Vendor (0xff) Completed without error 00% 1807 -
  1985. #19 Vendor (0xff) Completed without error 00% 1672 -
  1986. #20 Short offline Completed without error 00% 1481 -
  1987. #21 Vendor (0xff) Completed without error 00% 1481 -
  1988.  
  1989. SMART Selective self-test log data structure revision number 1
  1990. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1991. 1 0 0 Not_testing
  1992. 2 0 0 Not_testing
  1993. 3 0 0 Not_testing
  1994. 4 0 0 Not_testing
  1995. 5 0 0 Not_testing
  1996. Selective self-test flags (0x0):
  1997. After scanning selected spans, do NOT read-scan remainder of disk.
  1998. If Selective self-test is pending on power-up, resume after 0 minute delay.
  1999.  
  2000. ============================== 37 ==============================
  2001. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  2002. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  2003.  
  2004. /dev/sda [megaraid_disk_37] [SAT]: Device open changed type from 'megaraid,37' to 'sat+megaraid,37'
  2005. === START OF INFORMATION SECTION ===
  2006. Device Model: Micron_1100_MTFDDAK512TBN
  2007. Serial Number: 170916063224
  2008. LU WWN Device Id: 5 00a075 116063224
  2009. Firmware Version: M0MU031
  2010. User Capacity: 512 110 190 592 bytes [512 GB]
  2011. Sector Size: 512 bytes logical/physical
  2012. Rotation Rate: Solid State Device
  2013. Device is: Not in smartctl database [for details use: -P showall]
  2014. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  2015. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  2016. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  2017. SMART support is: Available - device has SMART capability.
  2018. SMART support is: Enabled
  2019.  
  2020. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  2021. SMART Enabled.
  2022.  
  2023. === START OF READ SMART DATA SECTION ===
  2024. SMART overall-health self-assessment test result: PASSED
  2025. Warning: This result is based on an Attribute check.
  2026.  
  2027. General SMART Values:
  2028. Offline data collection status: (0x04) Offline data collection activity
  2029. was suspended by an interrupting command from host.
  2030. Auto Offline Data Collection: Disabled.
  2031. Self-test execution status: ( 0) The previous self-test routine completed
  2032. without error or no self-test has ever
  2033. been run.
  2034. Total time to complete Offline
  2035. data collection: ( 263) seconds.
  2036. Offline data collection
  2037. capabilities: (0x7b) SMART execute Offline immediate.
  2038. Auto Offline data collection on/off support.
  2039. Suspend Offline collection upon new
  2040. command.
  2041. Offline surface scan supported.
  2042. Self-test supported.
  2043. Conveyance Self-test supported.
  2044. Selective Self-test supported.
  2045. SMART capabilities: (0x0003) Saves SMART data before entering
  2046. power-saving mode.
  2047. Supports SMART auto save timer.
  2048. Error logging capability: (0x01) Error logging supported.
  2049. General Purpose Logging supported.
  2050. Short self-test routine
  2051. recommended polling time: ( 2) minutes.
  2052. Extended self-test routine
  2053. recommended polling time: ( 6) minutes.
  2054. Conveyance self-test routine
  2055. recommended polling time: ( 3) minutes.
  2056. SCT capabilities: (0x0035) SCT Status supported.
  2057. SCT Feature Control supported.
  2058. SCT Data Table supported.
  2059.  
  2060. SMART Attributes Data Structure revision number: 16
  2061. Vendor Specific SMART Attributes with Thresholds:
  2062. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  2063. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  2064. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  2065. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8658
  2066. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  2067. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2068. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2069. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  2070. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  2071. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  2072. 184 End-to-End_Error 0x0032 093 093 000 Old_age Always - 7
  2073. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 6
  2074. 194 Temperature_Celsius 0x0022 072 064 000 Old_age Always - 28 (Min/Max 21/36)
  2075. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  2076. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  2077. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  2078. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  2079. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  2080. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  2081. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 11002268911
  2082. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 343843126
  2083. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 190787382
  2084. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2454
  2085. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2086.  
  2087. SMART Error Log Version: 1
  2088. ATA Error Count: 6 (device log contains only the most recent five errors)
  2089. CR = Command Register [HEX]
  2090. FR = Features Register [HEX]
  2091. SC = Sector Count Register [HEX]
  2092. SN = Sector Number Register [HEX]
  2093. CL = Cylinder Low Register [HEX]
  2094. CH = Cylinder High Register [HEX]
  2095. DH = Device/Head Register [HEX]
  2096. DC = Device Command Register [HEX]
  2097. ER = Error register [HEX]
  2098. ST = Status register [HEX]
  2099. Powered_Up_Time is measured from power on, and printed as
  2100. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  2101. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  2102.  
  2103. Error 6 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2104. When the command that caused the error occurred, the device was active or idle.
  2105.  
  2106. After command completion occurred, registers were:
  2107. ER ST SC SN CL CH DH
  2108. -- -- -- -- -- -- --
  2109. 40 51 e0 20 17 1d 40 Error: UNC at LBA = 0x001d1720 = 1906464
  2110.  
  2111. Commands leading to the command that caused the error were:
  2112. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2113. -- -- -- -- -- -- -- -- ---------------- --------------------
  2114. 60 00 e0 20 17 1d 40 00 11d+17:49:50.816 READ FPDMA QUEUED
  2115. 60 da 00 20 16 1d 40 00 11d+17:49:50.816 READ FPDMA QUEUED
  2116. 60 02 00 00 1c 1d 40 00 11d+17:49:50.816 READ FPDMA QUEUED
  2117. 60 00 20 00 16 1d 40 00 11d+17:49:50.816 READ FPDMA QUEUED
  2118. 60 da 90 78 0e 20 40 00 11d+17:49:50.816 READ FPDMA QUEUED
  2119.  
  2120. Error 5 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2121. When the command that caused the error occurred, the device was active or idle.
  2122.  
  2123. After command completion occurred, registers were:
  2124. ER ST SC SN CL CH DH
  2125. -- -- -- -- -- -- --
  2126. 40 51 00 00 16 1d 40 Error: UNC at LBA = 0x001d1600 = 1906176
  2127.  
  2128. Commands leading to the command that caused the error were:
  2129. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2130. -- -- -- -- -- -- -- -- ---------------- --------------------
  2131. 60 da 00 00 16 1d 40 00 11d+17:49:50.816 READ FPDMA QUEUED
  2132. 60 00 20 e0 07 20 40 00 11d+17:49:50.816 READ FPDMA QUEUED
  2133. 60 00 00 e0 06 20 40 00 11d+17:49:50.816 READ FPDMA QUEUED
  2134. 60 02 e0 00 06 20 40 00 11d+17:49:50.816 READ FPDMA QUEUED
  2135. 60 00 00 00 10 1d 40 00 11d+17:49:50.816 READ FPDMA QUEUED
  2136.  
  2137. Error 4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2138. When the command that caused the error occurred, the device was active or idle.
  2139.  
  2140. After command completion occurred, registers were:
  2141. ER ST SC SN CL CH DH
  2142. -- -- -- -- -- -- --
  2143. 40 51 00 a8 fa c8 40 Error: UNC at LBA = 0x00c8faa8 = 13171368
  2144.  
  2145. Commands leading to the command that caused the error were:
  2146. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2147. -- -- -- -- -- -- -- -- ---------------- --------------------
  2148. 60 da 00 a8 fa c8 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2149. 60 00 a8 00 fa c8 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2150. 60 da 00 00 00 c9 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2151. 60 00 c0 40 f5 2b 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2152. 60 00 70 00 5d 96 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2153.  
  2154. Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2155. When the command that caused the error occurred, the device was active or idle.
  2156.  
  2157. After command completion occurred, registers were:
  2158. ER ST SC SN CL CH DH
  2159. -- -- -- -- -- -- --
  2160. 40 51 00 00 fa c8 40 Error: UNC at LBA = 0x00c8fa00 = 13171200
  2161.  
  2162. Commands leading to the command that caused the error were:
  2163. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2164. -- -- -- -- -- -- -- -- ---------------- --------------------
  2165. 60 00 00 00 fa c8 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2166. 60 00 00 40 a2 92 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2167. 60 02 00 00 fe c8 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2168. 60 02 10 50 08 80 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2169. 60 da 10 38 08 80 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2170.  
  2171. Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2172. When the command that caused the error occurred, the device was active or idle.
  2173.  
  2174. After command completion occurred, registers were:
  2175. ER ST SC SN CL CH DH
  2176. -- -- -- -- -- -- --
  2177. 40 51 00 00 fa c8 40 Error: UNC at LBA = 0x00c8fa00 = 13171200
  2178.  
  2179. Commands leading to the command that caused the error were:
  2180. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2181. -- -- -- -- -- -- -- -- ---------------- --------------------
  2182. 60 00 00 00 fa c8 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2183. 60 da 40 00 f4 2b 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2184. 60 00 00 00 c8 f3 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2185. 60 00 00 00 c6 f3 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2186. 60 00 00 00 c4 f3 40 00 3d+05:18:50.816 READ FPDMA QUEUED
  2187.  
  2188. SMART Self-test log structure revision number 1
  2189. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  2190. # 1 Vendor (0xff) Completed without error 00% 7905 -
  2191. # 2 Vendor (0xff) Completed without error 00% 7581 -
  2192. # 3 Vendor (0xff) Completed without error 00% 6412 -
  2193. # 4 Vendor (0xff) Completed without error 00% 5879 -
  2194. # 5 Vendor (0xff) Completed without error 00% 5340 -
  2195. # 6 Vendor (0xff) Completed without error 00% 5273 -
  2196. # 7 Vendor (0xff) Completed without error 00% 4996 -
  2197. # 8 Vendor (0xff) Completed without error 00% 4690 -
  2198. # 9 Vendor (0xff) Completed without error 00% 4430 -
  2199. #10 Vendor (0xff) Completed without error 00% 4241 -
  2200. #11 Vendor (0xff) Completed without error 00% 3979 -
  2201. #12 Vendor (0xff) Completed without error 00% 3705 -
  2202. #13 Vendor (0xff) Completed without error 00% 3487 -
  2203. #14 Vendor (0xff) Completed without error 00% 3180 -
  2204. #15 Vendor (0xff) Completed without error 00% 2991 -
  2205. #16 Vendor (0xff) Completed without error 00% 2804 -
  2206. #17 Vendor (0xff) Completed without error 00% 2526 -
  2207. #18 Vendor (0xff) Completed without error 00% 2227 -
  2208. #19 Vendor (0xff) Completed without error 00% 1984 -
  2209. #20 Vendor (0xff) Completed without error 00% 1698 -
  2210. #21 Vendor (0xff) Completed without error 00% 1393 -
  2211.  
  2212. SMART Selective self-test log data structure revision number 1
  2213. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  2214. 1 0 0 Not_testing
  2215. 2 0 0 Not_testing
  2216. 3 0 0 Not_testing
  2217. 4 0 0 Not_testing
  2218. 5 0 0 Not_testing
  2219. Selective self-test flags (0x0):
  2220. After scanning selected spans, do NOT read-scan remainder of disk.
  2221. If Selective self-test is pending on power-up, resume after 0 minute delay.
  2222.  
  2223. ============================== 48 ==============================
  2224. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  2225. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  2226.  
  2227. /dev/sda [megaraid_disk_48] [SAT]: Device open changed type from 'megaraid,48' to 'sat+megaraid,48'
  2228. === START OF INFORMATION SECTION ===
  2229. Device Model: Micron_1100_MTFDDAK512TBN
  2230. Serial Number: 170815F9210F
  2231. LU WWN Device Id: 5 00a075 115f9210f
  2232. Firmware Version: M0MU031
  2233. User Capacity: 512 110 190 592 bytes [512 GB]
  2234. Sector Size: 512 bytes logical/physical
  2235. Rotation Rate: Solid State Device
  2236. Device is: Not in smartctl database [for details use: -P showall]
  2237. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  2238. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  2239. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  2240. SMART support is: Available - device has SMART capability.
  2241. SMART support is: Enabled
  2242.  
  2243. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  2244. SMART Enabled.
  2245.  
  2246. === START OF READ SMART DATA SECTION ===
  2247. SMART overall-health self-assessment test result: PASSED
  2248. Warning: This result is based on an Attribute check.
  2249.  
  2250. General SMART Values:
  2251. Offline data collection status: (0x04) Offline data collection activity
  2252. was suspended by an interrupting command from host.
  2253. Auto Offline Data Collection: Disabled.
  2254. Self-test execution status: ( 0) The previous self-test routine completed
  2255. without error or no self-test has ever
  2256. been run.
  2257. Total time to complete Offline
  2258. data collection: ( 480) seconds.
  2259. Offline data collection
  2260. capabilities: (0x7b) SMART execute Offline immediate.
  2261. Auto Offline data collection on/off support.
  2262. Suspend Offline collection upon new
  2263. command.
  2264. Offline surface scan supported.
  2265. Self-test supported.
  2266. Conveyance Self-test supported.
  2267. Selective Self-test supported.
  2268. SMART capabilities: (0x0003) Saves SMART data before entering
  2269. power-saving mode.
  2270. Supports SMART auto save timer.
  2271. Error logging capability: (0x01) Error logging supported.
  2272. General Purpose Logging supported.
  2273. Short self-test routine
  2274. recommended polling time: ( 2) minutes.
  2275. Extended self-test routine
  2276. recommended polling time: ( 6) minutes.
  2277. Conveyance self-test routine
  2278. recommended polling time: ( 3) minutes.
  2279. SCT capabilities: (0x0035) SCT Status supported.
  2280. SCT Feature Control supported.
  2281. SCT Data Table supported.
  2282.  
  2283. SMART Attributes Data Structure revision number: 16
  2284. Vendor Specific SMART Attributes with Thresholds:
  2285. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  2286. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  2287. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  2288. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7883
  2289. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  2290. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2291. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2292. 173 Unknown_Attribute 0x0032 098 098 000 Old_age Always - 31
  2293. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 5
  2294. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  2295. 184 End-to-End_Error 0x0032 099 099 000 Old_age Always - 1
  2296. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1
  2297. 194 Temperature_Celsius 0x0022 071 063 000 Old_age Always - 29 (Min/Max 19/37)
  2298. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  2299. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  2300. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
  2301. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  2302. 202 Unknown_SSD_Attribute 0x0030 098 098 001 Old_age Offline - 2
  2303. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  2304. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 12040631583
  2305. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 376332711
  2306. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 565620170
  2307. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2467
  2308. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2309.  
  2310. SMART Error Log Version: 1
  2311. ATA Error Count: 1
  2312. CR = Command Register [HEX]
  2313. FR = Features Register [HEX]
  2314. SC = Sector Count Register [HEX]
  2315. SN = Sector Number Register [HEX]
  2316. CL = Cylinder Low Register [HEX]
  2317. CH = Cylinder High Register [HEX]
  2318. DH = Device/Head Register [HEX]
  2319. DC = Device Command Register [HEX]
  2320. ER = Error register [HEX]
  2321. ST = Status register [HEX]
  2322. Powered_Up_Time is measured from power on, and printed as
  2323. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  2324. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  2325.  
  2326. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2327. When the command that caused the error occurred, the device was active or idle.
  2328.  
  2329. After command completion occurred, registers were:
  2330. ER ST SC SN CL CH DH
  2331. -- -- -- -- -- -- --
  2332. 40 51 00 00 e0 b4 40 Error: UNC at LBA = 0x00b4e000 = 11853824
  2333.  
  2334. Commands leading to the command that caused the error were:
  2335. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2336. -- -- -- -- -- -- -- -- ---------------- --------------------
  2337. 60 da 00 00 e0 b4 40 00 23d+20:11:25.408 READ FPDMA QUEUED
  2338. 60 00 00 00 de b4 40 00 23d+20:11:25.408 READ FPDMA QUEUED
  2339. 60 da 00 00 dc b4 40 00 23d+20:11:25.408 READ FPDMA QUEUED
  2340. 60 00 00 00 da b4 40 00 23d+20:11:25.408 READ FPDMA QUEUED
  2341. 60 00 00 00 d8 b4 40 00 23d+20:11:25.408 READ FPDMA QUEUED
  2342.  
  2343. SMART Self-test log structure revision number 1
  2344. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  2345. # 1 Vendor (0xff) Completed without error 00% 7781 -
  2346. # 2 Vendor (0xff) Completed without error 00% 7192 -
  2347. # 3 Vendor (0xff) Completed without error 00% 5728 -
  2348. # 4 Vendor (0xff) Completed without error 00% 5143 -
  2349. # 5 Vendor (0xff) Completed without error 00% 2936 -
  2350. # 6 Vendor (0xff) Completed without error 00% 2823 -
  2351. # 7 Vendor (0xff) Completed without error 00% 2592 -
  2352. # 8 Vendor (0xff) Completed without error 00% 2369 -
  2353. # 9 Vendor (0xff) Completed without error 00% 2215 -
  2354. #10 Vendor (0xff) Completed without error 00% 2106 -
  2355. #11 Vendor (0xff) Completed without error 00% 1971 -
  2356. #12 Vendor (0xff) Completed without error 00% 1808 -
  2357. #13 Vendor (0xff) Completed without error 00% 1672 -
  2358. #14 Short offline Completed without error 00% 1481 -
  2359. #15 Vendor (0xff) Completed without error 00% 1481 -
  2360. #16 Short offline Completed without error 00% 1100 -
  2361. #17 Vendor (0xff) Completed without error 00% 1068 -
  2362. #18 Vendor (0xff) Completed without error 00% 648 -
  2363. #19 Vendor (0xff) Completed without error 00% 520 -
  2364.  
  2365. SMART Selective self-test log data structure revision number 1
  2366. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  2367. 1 0 0 Not_testing
  2368. 2 0 0 Not_testing
  2369. 3 0 0 Not_testing
  2370. 4 0 0 Not_testing
  2371. 5 0 0 Not_testing
  2372. Selective self-test flags (0x0):
  2373. After scanning selected spans, do NOT read-scan remainder of disk.
  2374. If Selective self-test is pending on power-up, resume after 0 minute delay.
  2375.  
  2376. ============================== 51 ==============================
  2377. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  2378. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  2379.  
  2380. /dev/sda [megaraid_disk_51] [SAT]: Device open changed type from 'megaraid,51' to 'sat+megaraid,51'
  2381. === START OF INFORMATION SECTION ===
  2382. Device Model: Micron_1100_MTFDDAK512TBN
  2383. Serial Number: 170815FD3639
  2384. LU WWN Device Id: 5 00a075 115fd3639
  2385. Firmware Version: M0MU031
  2386. User Capacity: 512 110 190 592 bytes [512 GB]
  2387. Sector Size: 512 bytes logical/physical
  2388. Rotation Rate: Solid State Device
  2389. Device is: Not in smartctl database [for details use: -P showall]
  2390. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  2391. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  2392. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  2393. SMART support is: Available - device has SMART capability.
  2394. SMART support is: Enabled
  2395.  
  2396. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  2397. SMART Enabled.
  2398.  
  2399. === START OF READ SMART DATA SECTION ===
  2400. SMART overall-health self-assessment test result: PASSED
  2401. Warning: This result is based on an Attribute check.
  2402.  
  2403. General SMART Values:
  2404. Offline data collection status: (0x04) Offline data collection activity
  2405. was suspended by an interrupting command from host.
  2406. Auto Offline Data Collection: Disabled.
  2407. Self-test execution status: ( 0) The previous self-test routine completed
  2408. without error or no self-test has ever
  2409. been run.
  2410. Total time to complete Offline
  2411. data collection: ( 1128) seconds.
  2412. Offline data collection
  2413. capabilities: (0x7b) SMART execute Offline immediate.
  2414. Auto Offline data collection on/off support.
  2415. Suspend Offline collection upon new
  2416. command.
  2417. Offline surface scan supported.
  2418. Self-test supported.
  2419. Conveyance Self-test supported.
  2420. Selective Self-test supported.
  2421. SMART capabilities: (0x0003) Saves SMART data before entering
  2422. power-saving mode.
  2423. Supports SMART auto save timer.
  2424. Error logging capability: (0x01) Error logging supported.
  2425. General Purpose Logging supported.
  2426. Short self-test routine
  2427. recommended polling time: ( 2) minutes.
  2428. Extended self-test routine
  2429. recommended polling time: ( 9) minutes.
  2430. Conveyance self-test routine
  2431. recommended polling time: ( 3) minutes.
  2432. SCT capabilities: (0x0035) SCT Status supported.
  2433. SCT Feature Control supported.
  2434. SCT Data Table supported.
  2435.  
  2436. SMART Attributes Data Structure revision number: 16
  2437. Vendor Specific SMART Attributes with Thresholds:
  2438. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  2439. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  2440. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  2441. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  2442. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  2443. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2444. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2445. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  2446. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  2447. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  2448. 184 End-to-End_Error 0x0032 096 096 000 Old_age Always - 4
  2449. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 3
  2450. 194 Temperature_Celsius 0x0022 072 063 000 Old_age Always - 28 (Min/Max 21/37)
  2451. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  2452. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  2453. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
  2454. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  2455. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  2456. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  2457. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 11134452371
  2458. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 347985043
  2459. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 196947021
  2460. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2474
  2461. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2462.  
  2463. SMART Error Log Version: 1
  2464. ATA Error Count: 3
  2465. CR = Command Register [HEX]
  2466. FR = Features Register [HEX]
  2467. SC = Sector Count Register [HEX]
  2468. SN = Sector Number Register [HEX]
  2469. CL = Cylinder Low Register [HEX]
  2470. CH = Cylinder High Register [HEX]
  2471. DH = Device/Head Register [HEX]
  2472. DC = Device Command Register [HEX]
  2473. ER = Error register [HEX]
  2474. ST = Status register [HEX]
  2475. Powered_Up_Time is measured from power on, and printed as
  2476. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  2477. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  2478.  
  2479. Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2480. When the command that caused the error occurred, the device was active or idle.
  2481.  
  2482. After command completion occurred, registers were:
  2483. ER ST SC SN CL CH DH
  2484. -- -- -- -- -- -- --
  2485. 40 51 00 f0 a2 fa 40 Error: UNC at LBA = 0x00faa2f0 = 16425712
  2486.  
  2487. Commands leading to the command that caused the error were:
  2488. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2489. -- -- -- -- -- -- -- -- ---------------- --------------------
  2490. 60 00 00 f0 a2 fa 40 00 10d+15:09:50.816 READ FPDMA QUEUED
  2491. 60 da f0 00 a2 fa 40 00 10d+15:09:50.816 READ FPDMA QUEUED
  2492. 60 00 00 00 a8 fa 40 00 10d+15:09:50.816 READ FPDMA QUEUED
  2493. 60 02 00 00 a6 fa 40 00 10d+15:09:50.816 READ FPDMA QUEUED
  2494. 60 02 00 00 a4 fa 40 00 10d+15:09:50.816 READ FPDMA QUEUED
  2495.  
  2496. Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2497. When the command that caused the error occurred, the device was active or idle.
  2498.  
  2499. After command completion occurred, registers were:
  2500. ER ST SC SN CL CH DH
  2501. -- -- -- -- -- -- --
  2502. 40 51 00 00 a2 fa 40 Error: UNC at LBA = 0x00faa200 = 16425472
  2503.  
  2504. Commands leading to the command that caused the error were:
  2505. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2506. -- -- -- -- -- -- -- -- ---------------- --------------------
  2507. 60 da 00 00 a2 fa 40 00 10d+15:09:50.816 READ FPDMA QUEUED
  2508. 60 da 00 00 30 aa 40 00 10d+15:09:50.816 READ FPDMA QUEUED
  2509. 60 da 00 00 a0 fa 40 00 10d+15:09:50.816 READ FPDMA QUEUED
  2510. 60 00 50 b0 47 03 40 00 10d+15:09:50.816 READ FPDMA QUEUED
  2511. 60 da 00 00 9e fa 40 00 10d+15:09:50.816 READ FPDMA QUEUED
  2512.  
  2513. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2514. When the command that caused the error occurred, the device was active or idle.
  2515.  
  2516. After command completion occurred, registers were:
  2517. ER ST SC SN CL CH DH
  2518. -- -- -- -- -- -- --
  2519. 40 51 00 00 be f4 40 Error: UNC at LBA = 0x00f4be00 = 16039424
  2520.  
  2521. Commands leading to the command that caused the error were:
  2522. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2523. -- -- -- -- -- -- -- -- ---------------- --------------------
  2524. 60 da 00 00 be f4 40 00 34d+08:59:38.112 READ FPDMA QUEUED
  2525. 60 da 00 00 bc f4 40 00 34d+08:59:38.112 READ FPDMA QUEUED
  2526. 60 00 00 00 ba f4 40 00 34d+08:59:38.112 READ FPDMA QUEUED
  2527. 60 00 00 00 b8 f4 40 00 34d+08:59:38.112 READ FPDMA QUEUED
  2528. 60 00 00 00 b6 f4 40 00 34d+08:59:38.112 READ FPDMA QUEUED
  2529.  
  2530. SMART Self-test log structure revision number 1
  2531. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  2532. # 1 Vendor (0xff) Completed without error 00% 8651 -
  2533. # 2 Vendor (0xff) Completed without error 00% 7860 -
  2534. # 3 Vendor (0xff) Completed without error 00% 6483 -
  2535. # 4 Vendor (0xff) Completed without error 00% 5902 -
  2536. # 5 Vendor (0xff) Completed without error 00% 4328 -
  2537. # 6 Vendor (0xff) Completed without error 00% 4072 -
  2538. # 7 Vendor (0xff) Completed without error 00% 3817 -
  2539. # 8 Vendor (0xff) Completed without error 00% 3638 -
  2540. # 9 Vendor (0xff) Completed without error 00% 3417 -
  2541. #10 Vendor (0xff) Completed without error 00% 3162 -
  2542. #11 Vendor (0xff) Completed without error 00% 2971 -
  2543. #12 Vendor (0xff) Completed without error 00% 2730 -
  2544. #13 Vendor (0xff) Completed without error 00% 2435 -
  2545. #14 Vendor (0xff) Completed without error 00% 2172 -
  2546. #15 Vendor (0xff) Completed without error 00% 1961 -
  2547. #16 Vendor (0xff) Completed without error 00% 1709 -
  2548. #17 Vendor (0xff) Completed without error 00% 1393 -
  2549. #18 Short offline Completed without error 00% 1100 -
  2550. #19 Vendor (0xff) Completed without error 00% 1057 -
  2551. #20 Vendor (0xff) Completed without error 00% 648 -
  2552. #21 Vendor (0xff) Completed without error 00% 481 -
  2553.  
  2554. SMART Selective self-test log data structure revision number 1
  2555. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  2556. 1 0 0 Not_testing
  2557. 2 0 0 Not_testing
  2558. 3 0 0 Not_testing
  2559. 4 0 0 Not_testing
  2560. 5 0 0 Not_testing
  2561. Selective self-test flags (0x0):
  2562. After scanning selected spans, do NOT read-scan remainder of disk.
  2563. If Selective self-test is pending on power-up, resume after 0 minute delay.
  2564.  
  2565. ============================== 55 ==============================
  2566. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  2567. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  2568.  
  2569. /dev/sda [megaraid_disk_55] [SAT]: Device open changed type from 'megaraid,55' to 'sat+megaraid,55'
  2570. === START OF INFORMATION SECTION ===
  2571. Device Model: Micron_1100_MTFDDAK512TBN
  2572. Serial Number: 170815EE591F
  2573. LU WWN Device Id: 5 00a075 115ee591f
  2574. Firmware Version: M0MU031
  2575. User Capacity: 512 110 190 592 bytes [512 GB]
  2576. Sector Size: 512 bytes logical/physical
  2577. Rotation Rate: Solid State Device
  2578. Device is: Not in smartctl database [for details use: -P showall]
  2579. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  2580. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  2581. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  2582. SMART support is: Available - device has SMART capability.
  2583. SMART support is: Enabled
  2584.  
  2585. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  2586. SMART Enabled.
  2587.  
  2588. === START OF READ SMART DATA SECTION ===
  2589. SMART overall-health self-assessment test result: PASSED
  2590. Warning: This result is based on an Attribute check.
  2591.  
  2592. General SMART Values:
  2593. Offline data collection status: (0x04) Offline data collection activity
  2594. was suspended by an interrupting command from host.
  2595. Auto Offline Data Collection: Disabled.
  2596. Self-test execution status: ( 0) The previous self-test routine completed
  2597. without error or no self-test has ever
  2598. been run.
  2599. Total time to complete Offline
  2600. data collection: ( 342) seconds.
  2601. Offline data collection
  2602. capabilities: (0x7b) SMART execute Offline immediate.
  2603. Auto Offline data collection on/off support.
  2604. Suspend Offline collection upon new
  2605. command.
  2606. Offline surface scan supported.
  2607. Self-test supported.
  2608. Conveyance Self-test supported.
  2609. Selective Self-test supported.
  2610. SMART capabilities: (0x0003) Saves SMART data before entering
  2611. power-saving mode.
  2612. Supports SMART auto save timer.
  2613. Error logging capability: (0x01) Error logging supported.
  2614. General Purpose Logging supported.
  2615. Short self-test routine
  2616. recommended polling time: ( 2) minutes.
  2617. Extended self-test routine
  2618. recommended polling time: ( 6) minutes.
  2619. Conveyance self-test routine
  2620. recommended polling time: ( 3) minutes.
  2621. SCT capabilities: (0x0035) SCT Status supported.
  2622. SCT Feature Control supported.
  2623. SCT Data Table supported.
  2624.  
  2625. SMART Attributes Data Structure revision number: 16
  2626. Vendor Specific SMART Attributes with Thresholds:
  2627. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  2628. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  2629. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  2630. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  2631. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  2632. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2633. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2634. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  2635. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  2636. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  2637. 184 End-to-End_Error 0x0032 097 097 000 Old_age Always - 3
  2638. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 5
  2639. 194 Temperature_Celsius 0x0022 072 064 000 Old_age Always - 28 (Min/Max 21/36)
  2640. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  2641. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  2642. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  2643. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  2644. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  2645. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  2646. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 11093766367
  2647. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 346712086
  2648. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 190479873
  2649. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2478
  2650. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2651.  
  2652. SMART Error Log Version: 1
  2653. ATA Error Count: 5
  2654. CR = Command Register [HEX]
  2655. FR = Features Register [HEX]
  2656. SC = Sector Count Register [HEX]
  2657. SN = Sector Number Register [HEX]
  2658. CL = Cylinder Low Register [HEX]
  2659. CH = Cylinder High Register [HEX]
  2660. DH = Device/Head Register [HEX]
  2661. DC = Device Command Register [HEX]
  2662. ER = Error register [HEX]
  2663. ST = Status register [HEX]
  2664. Powered_Up_Time is measured from power on, and printed as
  2665. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  2666. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  2667.  
  2668. Error 5 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2669. When the command that caused the error occurred, the device was active or idle.
  2670.  
  2671. After command completion occurred, registers were:
  2672. ER ST SC SN CL CH DH
  2673. -- -- -- -- -- -- --
  2674. 40 51 00 88 84 4b 40 Error: UNC at LBA = 0x004b8488 = 4949128
  2675.  
  2676. Commands leading to the command that caused the error were:
  2677. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2678. -- -- -- -- -- -- -- -- ---------------- --------------------
  2679. 60 00 00 88 84 4b 40 00 22d+12:35:38.112 READ FPDMA QUEUED
  2680. 60 00 18 c8 ef 09 40 00 22d+12:35:38.112 READ FPDMA QUEUED
  2681. 60 00 20 a0 ef 09 40 00 22d+12:35:38.112 READ FPDMA QUEUED
  2682. 60 00 10 88 ef 09 40 00 22d+12:35:38.112 READ FPDMA QUEUED
  2683. 60 da 18 68 ef 09 40 00 22d+12:35:38.112 READ FPDMA QUEUED
  2684.  
  2685. Error 4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2686. When the command that caused the error occurred, the device was active or idle.
  2687.  
  2688. After command completion occurred, registers were:
  2689. ER ST SC SN CL CH DH
  2690. -- -- -- -- -- -- --
  2691. 40 51 c0 40 9b 53 40 Error: UNC at LBA = 0x00539b40 = 5479232
  2692.  
  2693. Commands leading to the command that caused the error were:
  2694. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2695. -- -- -- -- -- -- -- -- ---------------- --------------------
  2696. 60 00 c0 40 9b 53 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2697. ef 02 00 00 00 00 00 00 40d+04:00:25.408 SET FEATURES [Enable write cache]
  2698. ef aa 00 00 00 00 00 00 40d+04:00:25.408 SET FEATURES [Enable read look-ahead]
  2699. ec 00 00 00 00 00 00 00 40d+04:00:25.408 IDENTIFY DEVICE
  2700. b0 d0 00 00 4f c2 00 00 40d+04:00:25.408 SMART READ DATA
  2701.  
  2702. Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2703. When the command that caused the error occurred, the device was active or idle.
  2704.  
  2705. After command completion occurred, registers were:
  2706. ER ST SC SN CL CH DH
  2707. -- -- -- -- -- -- --
  2708. 40 51 c0 40 9b 53 40 Error: UNC at LBA = 0x00539b40 = 5479232
  2709.  
  2710. Commands leading to the command that caused the error were:
  2711. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2712. -- -- -- -- -- -- -- -- ---------------- --------------------
  2713. 60 da c0 40 9b 53 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2714. 60 00 00 40 9a 53 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2715. 60 da 40 00 9a 53 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2716. 60 da 00 00 a0 53 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2717. 60 00 20 d8 47 82 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2718.  
  2719. Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2720. When the command that caused the error occurred, the device was active or idle.
  2721.  
  2722. After command completion occurred, registers were:
  2723. ER ST SC SN CL CH DH
  2724. -- -- -- -- -- -- --
  2725. 40 51 00 00 9a 53 40 Error: UNC at LBA = 0x00539a00 = 5478912
  2726.  
  2727. Commands leading to the command that caused the error were:
  2728. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2729. -- -- -- -- -- -- -- -- ---------------- --------------------
  2730. 60 02 00 00 9a 53 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2731. 60 00 08 f8 45 82 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2732. 60 da 08 e8 45 82 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2733. 60 00 10 d0 45 82 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2734. 60 da 18 b0 45 82 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2735.  
  2736. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2737. When the command that caused the error occurred, the device was active or idle.
  2738.  
  2739. After command completion occurred, registers were:
  2740. ER ST SC SN CL CH DH
  2741. -- -- -- -- -- -- --
  2742. 40 51 00 00 9a 53 40 Error: UNC at LBA = 0x00539a00 = 5478912
  2743.  
  2744. Commands leading to the command that caused the error were:
  2745. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2746. -- -- -- -- -- -- -- -- ---------------- --------------------
  2747. 60 da 00 00 9a 53 40 00 40d+04:00:25.408 READ FPDMA QUEUED
  2748. 61 00 00 00 98 0a 40 00 40d+04:00:25.408 WRITE FPDMA QUEUED
  2749. 61 00 00 00 6a 3f 40 00 40d+04:00:25.408 WRITE FPDMA QUEUED
  2750. 61 da 00 00 7e e3 40 00 40d+04:00:25.408 WRITE FPDMA QUEUED
  2751. 61 00 00 00 7c e3 40 00 40d+04:00:25.408 WRITE FPDMA QUEUED
  2752.  
  2753. SMART Self-test log structure revision number 1
  2754. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  2755. # 1 Vendor (0xff) Completed without error 00% 7771 -
  2756. # 2 Vendor (0xff) Completed without error 00% 7703 -
  2757. # 3 Vendor (0xff) Completed without error 00% 6433 -
  2758. # 4 Vendor (0xff) Completed without error 00% 5881 -
  2759. # 5 Vendor (0xff) Completed without error 00% 5344 -
  2760. # 6 Vendor (0xff) Completed without error 00% 5071 -
  2761. # 7 Vendor (0xff) Completed without error 00% 4788 -
  2762. # 8 Vendor (0xff) Completed without error 00% 4513 -
  2763. # 9 Vendor (0xff) Completed without error 00% 4284 -
  2764. #10 Vendor (0xff) Completed without error 00% 4053 -
  2765. #11 Vendor (0xff) Completed without error 00% 3820 -
  2766. #12 Vendor (0xff) Completed without error 00% 3604 -
  2767. #13 Vendor (0xff) Completed without error 00% 3422 -
  2768. #14 Vendor (0xff) Completed without error 00% 3149 -
  2769. #15 Vendor (0xff) Completed without error 00% 2990 -
  2770. #16 Vendor (0xff) Completed without error 00% 2790 -
  2771. #17 Vendor (0xff) Completed without error 00% 2547 -
  2772. #18 Vendor (0xff) Completed without error 00% 2306 -
  2773. #19 Vendor (0xff) Completed without error 00% 2068 -
  2774. #20 Vendor (0xff) Completed without error 00% 1868 -
  2775. #21 Vendor (0xff) Completed without error 00% 1661 -
  2776.  
  2777. SMART Selective self-test log data structure revision number 1
  2778. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  2779. 1 0 0 Not_testing
  2780. 2 0 0 Not_testing
  2781. 3 0 0 Not_testing
  2782. 4 0 0 Not_testing
  2783. 5 0 0 Not_testing
  2784. Selective self-test flags (0x0):
  2785. After scanning selected spans, do NOT read-scan remainder of disk.
  2786. If Selective self-test is pending on power-up, resume after 0 minute delay.
  2787.  
  2788. ============================== 39 ==============================
  2789. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  2790. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  2791.  
  2792. /dev/sda [megaraid_disk_39] [SAT]: Device open changed type from 'megaraid,39' to 'sat+megaraid,39'
  2793. === START OF INFORMATION SECTION ===
  2794. Device Model: Micron_1100_MTFDDAK512TBN
  2795. Serial Number: 170916063264
  2796. LU WWN Device Id: 5 00a075 116063264
  2797. Firmware Version: M0MU031
  2798. User Capacity: 512 110 190 592 bytes [512 GB]
  2799. Sector Size: 512 bytes logical/physical
  2800. Rotation Rate: Solid State Device
  2801. Device is: Not in smartctl database [for details use: -P showall]
  2802. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  2803. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  2804. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  2805. SMART support is: Available - device has SMART capability.
  2806. SMART support is: Enabled
  2807.  
  2808. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  2809. SMART Enabled.
  2810.  
  2811. === START OF READ SMART DATA SECTION ===
  2812. SMART overall-health self-assessment test result: PASSED
  2813. Warning: This result is based on an Attribute check.
  2814.  
  2815. General SMART Values:
  2816. Offline data collection status: (0x04) Offline data collection activity
  2817. was suspended by an interrupting command from host.
  2818. Auto Offline Data Collection: Disabled.
  2819. Self-test execution status: ( 0) The previous self-test routine completed
  2820. without error or no self-test has ever
  2821. been run.
  2822. Total time to complete Offline
  2823. data collection: ( 334) seconds.
  2824. Offline data collection
  2825. capabilities: (0x7b) SMART execute Offline immediate.
  2826. Auto Offline data collection on/off support.
  2827. Suspend Offline collection upon new
  2828. command.
  2829. Offline surface scan supported.
  2830. Self-test supported.
  2831. Conveyance Self-test supported.
  2832. Selective Self-test supported.
  2833. SMART capabilities: (0x0003) Saves SMART data before entering
  2834. power-saving mode.
  2835. Supports SMART auto save timer.
  2836. Error logging capability: (0x01) Error logging supported.
  2837. General Purpose Logging supported.
  2838. Short self-test routine
  2839. recommended polling time: ( 2) minutes.
  2840. Extended self-test routine
  2841. recommended polling time: ( 7) minutes.
  2842. Conveyance self-test routine
  2843. recommended polling time: ( 3) minutes.
  2844. SCT capabilities: (0x0035) SCT Status supported.
  2845. SCT Feature Control supported.
  2846. SCT Data Table supported.
  2847.  
  2848. SMART Attributes Data Structure revision number: 16
  2849. Vendor Specific SMART Attributes with Thresholds:
  2850. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  2851. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  2852. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  2853. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  2854. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  2855. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2856. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2857. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  2858. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  2859. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  2860. 184 End-to-End_Error 0x0032 096 096 000 Old_age Always - 4
  2861. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 8
  2862. 194 Temperature_Celsius 0x0022 072 064 000 Old_age Always - 28 (Min/Max 21/36)
  2863. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  2864. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  2865. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
  2866. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  2867. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  2868. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  2869. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 11021666818
  2870. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 344462922
  2871. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 189146963
  2872. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2472
  2873. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  2874.  
  2875. SMART Error Log Version: 1
  2876. ATA Error Count: 8 (device log contains only the most recent five errors)
  2877. CR = Command Register [HEX]
  2878. FR = Features Register [HEX]
  2879. SC = Sector Count Register [HEX]
  2880. SN = Sector Number Register [HEX]
  2881. CL = Cylinder Low Register [HEX]
  2882. CH = Cylinder High Register [HEX]
  2883. DH = Device/Head Register [HEX]
  2884. DC = Device Command Register [HEX]
  2885. ER = Error register [HEX]
  2886. ST = Status register [HEX]
  2887. Powered_Up_Time is measured from power on, and printed as
  2888. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  2889. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  2890.  
  2891. Error 8 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2892. When the command that caused the error occurred, the device was active or idle.
  2893.  
  2894. After command completion occurred, registers were:
  2895. ER ST SC SN CL CH DH
  2896. -- -- -- -- -- -- --
  2897. 40 51 00 e0 1e bb 40 Error: UNC at LBA = 0x00bb1ee0 = 12263136
  2898.  
  2899. Commands leading to the command that caused the error were:
  2900. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2901. -- -- -- -- -- -- -- -- ---------------- --------------------
  2902. 60 da 00 e0 1e bb 40 00 4d+02:15:50.816 READ FPDMA QUEUED
  2903. 61 00 00 00 e2 ca 40 00 4d+02:15:50.816 WRITE FPDMA QUEUED
  2904. 61 00 00 00 8a 0d 40 00 4d+02:15:50.816 WRITE FPDMA QUEUED
  2905. 60 da e0 00 1e bb 40 00 4d+02:15:50.816 READ FPDMA QUEUED
  2906. 61 00 38 30 6c 06 40 00 4d+02:15:50.816 WRITE FPDMA QUEUED
  2907.  
  2908. Error 7 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2909. When the command that caused the error occurred, the device was active or idle.
  2910.  
  2911. After command completion occurred, registers were:
  2912. ER ST SC SN CL CH DH
  2913. -- -- -- -- -- -- --
  2914. 40 51 00 00 1e bb 40 Error: UNC at LBA = 0x00bb1e00 = 12262912
  2915.  
  2916. Commands leading to the command that caused the error were:
  2917. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2918. -- -- -- -- -- -- -- -- ---------------- --------------------
  2919. 60 da 00 00 1e bb 40 00 4d+02:14:50.816 READ FPDMA QUEUED
  2920. 60 00 20 08 f6 73 40 00 4d+02:14:50.816 READ FPDMA QUEUED
  2921. 60 da 00 00 cc c9 40 00 4d+02:14:50.816 READ FPDMA QUEUED
  2922. 60 02 08 30 18 99 40 00 4d+02:14:50.816 READ FPDMA QUEUED
  2923. 60 00 00 00 18 bb 40 00 4d+02:14:50.816 READ FPDMA QUEUED
  2924.  
  2925. Error 6 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2926. When the command that caused the error occurred, the device was active or idle.
  2927.  
  2928. After command completion occurred, registers were:
  2929. ER ST SC SN CL CH DH
  2930. -- -- -- -- -- -- --
  2931. 40 51 e8 18 cf 35 40 Error: UNC at LBA = 0x0035cf18 = 3526424
  2932.  
  2933. Commands leading to the command that caused the error were:
  2934. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2935. -- -- -- -- -- -- -- -- ---------------- --------------------
  2936. 60 00 e8 18 cf 35 40 00 12d+20:27:25.408 READ FPDMA QUEUED
  2937. 61 da 08 b8 6a 09 40 00 12d+20:27:25.408 WRITE FPDMA QUEUED
  2938. 61 02 70 90 eb 47 40 00 12d+20:27:25.408 WRITE FPDMA QUEUED
  2939. 61 02 08 e0 ca 06 40 00 12d+20:27:25.408 WRITE FPDMA QUEUED
  2940. 61 da 08 f8 15 ae 40 00 12d+20:27:25.408 WRITE FPDMA QUEUED
  2941.  
  2942. Error 5 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2943. When the command that caused the error occurred, the device was active or idle.
  2944.  
  2945. After command completion occurred, registers were:
  2946. ER ST SC SN CL CH DH
  2947. -- -- -- -- -- -- --
  2948. 40 51 00 00 36 66 40 Error: UNC at LBA = 0x00663600 = 6698496
  2949.  
  2950. Commands leading to the command that caused the error were:
  2951. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2952. -- -- -- -- -- -- -- -- ---------------- --------------------
  2953. 60 00 00 00 36 66 40 00 02:36:25.408 READ FPDMA QUEUED
  2954. 60 00 00 00 34 66 40 00 02:36:25.408 READ FPDMA QUEUED
  2955. 60 00 00 00 32 66 40 00 02:36:25.408 READ FPDMA QUEUED
  2956. 60 00 00 00 30 66 40 00 02:36:25.408 READ FPDMA QUEUED
  2957. 60 00 00 00 2e 66 40 00 02:36:25.408 READ FPDMA QUEUED
  2958.  
  2959. Error 4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  2960. When the command that caused the error occurred, the device was active or idle.
  2961.  
  2962. After command completion occurred, registers were:
  2963. ER ST SC SN CL CH DH
  2964. -- -- -- -- -- -- --
  2965. 40 51 78 88 f3 7c 40 Error: UNC at LBA = 0x007cf388 = 8188808
  2966.  
  2967. Commands leading to the command that caused the error were:
  2968. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  2969. -- -- -- -- -- -- -- -- ---------------- --------------------
  2970. 60 00 78 88 f3 7c 40 00 40d+10:25:12.704 READ FPDMA QUEUED
  2971. 60 00 00 88 f2 7c 40 00 40d+10:25:12.704 READ FPDMA QUEUED
  2972. 60 da 08 f0 55 41 40 00 40d+10:25:12.704 READ FPDMA QUEUED
  2973. 60 00 18 d0 55 41 40 00 40d+10:25:12.704 READ FPDMA QUEUED
  2974. 60 00 10 b8 55 41 40 00 40d+10:25:12.704 READ FPDMA QUEUED
  2975.  
  2976. SMART Self-test log structure revision number 1
  2977. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  2978. # 1 Vendor (0xff) Completed without error 00% 7651 -
  2979. # 2 Vendor (0xff) Completed without error 00% 7587 -
  2980. # 3 Vendor (0xff) Completed without error 00% 6412 -
  2981. # 4 Vendor (0xff) Completed without error 00% 5882 -
  2982. # 5 Vendor (0xff) Completed without error 00% 5344 -
  2983. # 6 Vendor (0xff) Completed without error 00% 5095 -
  2984. # 7 Vendor (0xff) Completed without error 00% 4819 -
  2985. # 8 Vendor (0xff) Completed without error 00% 4548 -
  2986. # 9 Vendor (0xff) Completed without error 00% 4327 -
  2987. #10 Vendor (0xff) Completed without error 00% 4101 -
  2988. #11 Vendor (0xff) Completed without error 00% 3857 -
  2989. #12 Vendor (0xff) Completed without error 00% 3650 -
  2990. #13 Vendor (0xff) Completed without error 00% 3369 -
  2991. #14 Vendor (0xff) Completed without error 00% 3156 -
  2992. #15 Vendor (0xff) Completed without error 00% 2128 -
  2993. #16 Vendor (0xff) Completed without error 00% 1962 -
  2994. #17 Vendor (0xff) Completed without error 00% 1707 -
  2995. #18 Vendor (0xff) Completed without error 00% 1392 -
  2996. #19 Short offline Completed without error 00% 1100 -
  2997. #20 Vendor (0xff) Completed without error 00% 1090 -
  2998. #21 Vendor (0xff) Completed without error 00% 1010 -
  2999.  
  3000. SMART Selective self-test log data structure revision number 1
  3001. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  3002. 1 0 0 Not_testing
  3003. 2 0 0 Not_testing
  3004. 3 0 0 Not_testing
  3005. 4 0 0 Not_testing
  3006. 5 0 0 Not_testing
  3007. Selective self-test flags (0x0):
  3008. After scanning selected spans, do NOT read-scan remainder of disk.
  3009. If Selective self-test is pending on power-up, resume after 0 minute delay.
  3010.  
  3011. ============================== 43 ==============================
  3012. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  3013. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3014.  
  3015. /dev/sda [megaraid_disk_43] [SAT]: Device open changed type from 'megaraid,43' to 'sat+megaraid,43'
  3016. === START OF INFORMATION SECTION ===
  3017. Device Model: Micron_1100_MTFDDAK512TBN
  3018. Serial Number: 170815EE6062
  3019. LU WWN Device Id: 5 00a075 115ee6062
  3020. Firmware Version: M0MU031
  3021. User Capacity: 512 110 190 592 bytes [512 GB]
  3022. Sector Size: 512 bytes logical/physical
  3023. Rotation Rate: Solid State Device
  3024. Device is: Not in smartctl database [for details use: -P showall]
  3025. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  3026. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  3027. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  3028. SMART support is: Available - device has SMART capability.
  3029. SMART support is: Enabled
  3030.  
  3031. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  3032. SMART Enabled.
  3033.  
  3034. === START OF READ SMART DATA SECTION ===
  3035. SMART overall-health self-assessment test result: PASSED
  3036. Warning: This result is based on an Attribute check.
  3037.  
  3038. General SMART Values:
  3039. Offline data collection status: (0x04) Offline data collection activity
  3040. was suspended by an interrupting command from host.
  3041. Auto Offline Data Collection: Disabled.
  3042. Self-test execution status: ( 0) The previous self-test routine completed
  3043. without error or no self-test has ever
  3044. been run.
  3045. Total time to complete Offline
  3046. data collection: ( 657) seconds.
  3047. Offline data collection
  3048. capabilities: (0x7b) SMART execute Offline immediate.
  3049. Auto Offline data collection on/off support.
  3050. Suspend Offline collection upon new
  3051. command.
  3052. Offline surface scan supported.
  3053. Self-test supported.
  3054. Conveyance Self-test supported.
  3055. Selective Self-test supported.
  3056. SMART capabilities: (0x0003) Saves SMART data before entering
  3057. power-saving mode.
  3058. Supports SMART auto save timer.
  3059. Error logging capability: (0x01) Error logging supported.
  3060. General Purpose Logging supported.
  3061. Short self-test routine
  3062. recommended polling time: ( 2) minutes.
  3063. Extended self-test routine
  3064. recommended polling time: ( 9) minutes.
  3065. Conveyance self-test routine
  3066. recommended polling time: ( 3) minutes.
  3067. SCT capabilities: (0x0035) SCT Status supported.
  3068. SCT Feature Control supported.
  3069. SCT Data Table supported.
  3070.  
  3071. SMART Attributes Data Structure revision number: 16
  3072. Vendor Specific SMART Attributes with Thresholds:
  3073. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  3074. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  3075. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  3076. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8658
  3077. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  3078. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3079. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3080. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  3081. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  3082. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  3083. 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
  3084. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  3085. 194 Temperature_Celsius 0x0022 072 063 000 Old_age Always - 28 (Min/Max 21/37)
  3086. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  3087. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  3088. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  3089. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  3090. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  3091. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  3092. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10938701285
  3093. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 341853175
  3094. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 190708070
  3095. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2473
  3096. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3097.  
  3098. SMART Error Log Version: 1
  3099. No Errors Logged
  3100.  
  3101. SMART Self-test log structure revision number 1
  3102. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  3103. # 1 Vendor (0xff) Completed without error 00% 8099 -
  3104. # 2 Vendor (0xff) Completed without error 00% 7813 -
  3105. # 3 Vendor (0xff) Completed without error 00% 6455 -
  3106. # 4 Vendor (0xff) Completed without error 00% 5888 -
  3107. # 5 Vendor (0xff) Completed without error 00% 5320 -
  3108. # 6 Vendor (0xff) Completed without error 00% 5040 -
  3109. # 7 Vendor (0xff) Completed without error 00% 4787 -
  3110. # 8 Vendor (0xff) Completed without error 00% 4523 -
  3111. # 9 Vendor (0xff) Completed without error 00% 4272 -
  3112. #10 Vendor (0xff) Completed without error 00% 4030 -
  3113. #11 Vendor (0xff) Completed without error 00% 3817 -
  3114. #12 Vendor (0xff) Completed without error 00% 3606 -
  3115. #13 Vendor (0xff) Completed without error 00% 3367 -
  3116. #14 Vendor (0xff) Completed without error 00% 3143 -
  3117. #15 Vendor (0xff) Completed without error 00% 2991 -
  3118. #16 Vendor (0xff) Completed without error 00% 2871 -
  3119. #17 Vendor (0xff) Completed without error 00% 2673 -
  3120. #18 Vendor (0xff) Completed without error 00% 2430 -
  3121. #19 Vendor (0xff) Completed without error 00% 2171 -
  3122. #20 Vendor (0xff) Completed without error 00% 1962 -
  3123. #21 Vendor (0xff) Completed without error 00% 1707 -
  3124.  
  3125. SMART Selective self-test log data structure revision number 1
  3126. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  3127. 1 0 0 Not_testing
  3128. 2 0 0 Not_testing
  3129. 3 0 0 Not_testing
  3130. 4 0 0 Not_testing
  3131. 5 0 0 Not_testing
  3132. Selective self-test flags (0x0):
  3133. After scanning selected spans, do NOT read-scan remainder of disk.
  3134. If Selective self-test is pending on power-up, resume after 0 minute delay.
  3135.  
  3136. ============================== 42 ==============================
  3137. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  3138. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3139.  
  3140. /dev/sda [megaraid_disk_42] [SAT]: Device open changed type from 'megaraid,42' to 'sat+megaraid,42'
  3141. === START OF INFORMATION SECTION ===
  3142. Device Model: Micron_1100_MTFDDAK512TBN
  3143. Serial Number: 170815EE5DDA
  3144. LU WWN Device Id: 5 00a075 115ee5dda
  3145. Firmware Version: M0MU031
  3146. User Capacity: 512 110 190 592 bytes [512 GB]
  3147. Sector Size: 512 bytes logical/physical
  3148. Rotation Rate: Solid State Device
  3149. Device is: Not in smartctl database [for details use: -P showall]
  3150. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  3151. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  3152. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  3153. SMART support is: Available - device has SMART capability.
  3154. SMART support is: Enabled
  3155.  
  3156. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  3157. SMART Enabled.
  3158.  
  3159. === START OF READ SMART DATA SECTION ===
  3160. SMART overall-health self-assessment test result: PASSED
  3161. Warning: This result is based on an Attribute check.
  3162.  
  3163. General SMART Values:
  3164. Offline data collection status: (0x04) Offline data collection activity
  3165. was suspended by an interrupting command from host.
  3166. Auto Offline Data Collection: Disabled.
  3167. Self-test execution status: ( 0) The previous self-test routine completed
  3168. without error or no self-test has ever
  3169. been run.
  3170. Total time to complete Offline
  3171. data collection: ( 355) seconds.
  3172. Offline data collection
  3173. capabilities: (0x7b) SMART execute Offline immediate.
  3174. Auto Offline data collection on/off support.
  3175. Suspend Offline collection upon new
  3176. command.
  3177. Offline surface scan supported.
  3178. Self-test supported.
  3179. Conveyance Self-test supported.
  3180. Selective Self-test supported.
  3181. SMART capabilities: (0x0003) Saves SMART data before entering
  3182. power-saving mode.
  3183. Supports SMART auto save timer.
  3184. Error logging capability: (0x01) Error logging supported.
  3185. General Purpose Logging supported.
  3186. Short self-test routine
  3187. recommended polling time: ( 2) minutes.
  3188. Extended self-test routine
  3189. recommended polling time: ( 7) minutes.
  3190. Conveyance self-test routine
  3191. recommended polling time: ( 3) minutes.
  3192. SCT capabilities: (0x0035) SCT Status supported.
  3193. SCT Feature Control supported.
  3194. SCT Data Table supported.
  3195.  
  3196. SMART Attributes Data Structure revision number: 16
  3197. Vendor Specific SMART Attributes with Thresholds:
  3198. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  3199. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  3200. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  3201. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  3202. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  3203. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3204. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3205. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  3206. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  3207. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  3208. 184 End-to-End_Error 0x0032 098 098 000 Old_age Always - 2
  3209. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1
  3210. 194 Temperature_Celsius 0x0022 072 064 000 Old_age Always - 28 (Min/Max 21/36)
  3211. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  3212. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  3213. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  3214. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  3215. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  3216. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  3217. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10987657392
  3218. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 343381052
  3219. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 192050832
  3220. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2471
  3221. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3222.  
  3223. SMART Error Log Version: 1
  3224. ATA Error Count: 1
  3225. CR = Command Register [HEX]
  3226. FR = Features Register [HEX]
  3227. SC = Sector Count Register [HEX]
  3228. SN = Sector Number Register [HEX]
  3229. CL = Cylinder Low Register [HEX]
  3230. CH = Cylinder High Register [HEX]
  3231. DH = Device/Head Register [HEX]
  3232. DC = Device Command Register [HEX]
  3233. ER = Error register [HEX]
  3234. ST = Status register [HEX]
  3235. Powered_Up_Time is measured from power on, and printed as
  3236. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  3237. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  3238.  
  3239. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3240. When the command that caused the error occurred, the device was active or idle.
  3241.  
  3242. After command completion occurred, registers were:
  3243. ER ST SC SN CL CH DH
  3244. -- -- -- -- -- -- --
  3245. 40 51 00 00 de 48 40 Error: UNC at LBA = 0x0048de00 = 4775424
  3246.  
  3247. Commands leading to the command that caused the error were:
  3248. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3249. -- -- -- -- -- -- -- -- ---------------- --------------------
  3250. 60 da 00 00 de 48 40 00 02:40:25.408 READ FPDMA QUEUED
  3251. 60 00 00 00 dc 48 40 00 02:40:25.408 READ FPDMA QUEUED
  3252. 60 da 00 00 da 48 40 00 02:40:25.408 READ FPDMA QUEUED
  3253. 60 00 00 00 d8 48 40 00 02:40:25.408 READ FPDMA QUEUED
  3254. 60 da 00 00 d6 48 40 00 02:40:25.408 READ FPDMA QUEUED
  3255.  
  3256. SMART Self-test log structure revision number 1
  3257. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  3258. # 1 Vendor (0xff) Completed without error 00% 7723 -
  3259. # 2 Vendor (0xff) Completed without error 00% 7649 -
  3260. # 3 Vendor (0xff) Completed without error 00% 6409 -
  3261. # 4 Vendor (0xff) Completed without error 00% 5881 -
  3262. # 5 Vendor (0xff) Completed without error 00% 5344 -
  3263. # 6 Vendor (0xff) Completed without error 00% 5109 -
  3264. # 7 Vendor (0xff) Completed without error 00% 4882 -
  3265. # 8 Vendor (0xff) Completed without error 00% 4585 -
  3266. # 9 Vendor (0xff) Completed without error 00% 4325 -
  3267. #10 Vendor (0xff) Completed without error 00% 4096 -
  3268. #11 Vendor (0xff) Completed without error 00% 3865 -
  3269. #12 Vendor (0xff) Completed without error 00% 3603 -
  3270. #13 Vendor (0xff) Completed without error 00% 3420 -
  3271. #14 Vendor (0xff) Completed without error 00% 3157 -
  3272. #15 Vendor (0xff) Completed without error 00% 2990 -
  3273. #16 Vendor (0xff) Completed without error 00% 2733 -
  3274. #17 Vendor (0xff) Completed without error 00% 2453 -
  3275. #18 Vendor (0xff) Completed without error 00% 2194 -
  3276. #19 Vendor (0xff) Completed without error 00% 1969 -
  3277. #20 Vendor (0xff) Completed without error 00% 1720 -
  3278. #21 Vendor (0xff) Completed without error 00% 1394 -
  3279.  
  3280. SMART Selective self-test log data structure revision number 1
  3281. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  3282. 1 0 0 Not_testing
  3283. 2 0 0 Not_testing
  3284. 3 0 0 Not_testing
  3285. 4 0 0 Not_testing
  3286. 5 0 0 Not_testing
  3287. Selective self-test flags (0x0):
  3288. After scanning selected spans, do NOT read-scan remainder of disk.
  3289. If Selective self-test is pending on power-up, resume after 0 minute delay.
  3290.  
  3291. ============================== 49 ==============================
  3292. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  3293. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3294.  
  3295. /dev/sda [megaraid_disk_49] [SAT]: Device open changed type from 'megaraid,49' to 'sat+megaraid,49'
  3296. === START OF INFORMATION SECTION ===
  3297. Device Model: Micron_1100_MTFDDAK512TBN
  3298. Serial Number: 170815EE664B
  3299. LU WWN Device Id: 5 00a075 115ee664b
  3300. Firmware Version: M0MU031
  3301. User Capacity: 512 110 190 592 bytes [512 GB]
  3302. Sector Size: 512 bytes logical/physical
  3303. Rotation Rate: Solid State Device
  3304. Device is: Not in smartctl database [for details use: -P showall]
  3305. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  3306. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  3307. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  3308. SMART support is: Available - device has SMART capability.
  3309. SMART support is: Enabled
  3310.  
  3311. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  3312. SMART Enabled.
  3313.  
  3314. === START OF READ SMART DATA SECTION ===
  3315. SMART overall-health self-assessment test result: PASSED
  3316. Warning: This result is based on an Attribute check.
  3317.  
  3318. General SMART Values:
  3319. Offline data collection status: (0x04) Offline data collection activity
  3320. was suspended by an interrupting command from host.
  3321. Auto Offline Data Collection: Disabled.
  3322. Self-test execution status: ( 0) The previous self-test routine completed
  3323. without error or no self-test has ever
  3324. been run.
  3325. Total time to complete Offline
  3326. data collection: ( 941) seconds.
  3327. Offline data collection
  3328. capabilities: (0x7b) SMART execute Offline immediate.
  3329. Auto Offline data collection on/off support.
  3330. Suspend Offline collection upon new
  3331. command.
  3332. Offline surface scan supported.
  3333. Self-test supported.
  3334. Conveyance Self-test supported.
  3335. Selective Self-test supported.
  3336. SMART capabilities: (0x0003) Saves SMART data before entering
  3337. power-saving mode.
  3338. Supports SMART auto save timer.
  3339. Error logging capability: (0x01) Error logging supported.
  3340. General Purpose Logging supported.
  3341. Short self-test routine
  3342. recommended polling time: ( 2) minutes.
  3343. Extended self-test routine
  3344. recommended polling time: ( 7) minutes.
  3345. Conveyance self-test routine
  3346. recommended polling time: ( 3) minutes.
  3347. SCT capabilities: (0x0035) SCT Status supported.
  3348. SCT Feature Control supported.
  3349. SCT Data Table supported.
  3350.  
  3351. SMART Attributes Data Structure revision number: 16
  3352. Vendor Specific SMART Attributes with Thresholds:
  3353. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  3354. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  3355. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  3356. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  3357. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  3358. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3359. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3360. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  3361. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  3362. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  3363. 184 End-to-End_Error 0x0032 097 097 000 Old_age Always - 3
  3364. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 6
  3365. 194 Temperature_Celsius 0x0022 072 063 000 Old_age Always - 28 (Min/Max 21/37)
  3366. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  3367. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  3368. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
  3369. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  3370. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  3371. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  3372. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 11051515874
  3373. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 345399037
  3374. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 193913503
  3375. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2474
  3376. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3377.  
  3378. SMART Error Log Version: 1
  3379. ATA Error Count: 6 (device log contains only the most recent five errors)
  3380. CR = Command Register [HEX]
  3381. FR = Features Register [HEX]
  3382. SC = Sector Count Register [HEX]
  3383. SN = Sector Number Register [HEX]
  3384. CL = Cylinder Low Register [HEX]
  3385. CH = Cylinder High Register [HEX]
  3386. DH = Device/Head Register [HEX]
  3387. DC = Device Command Register [HEX]
  3388. ER = Error register [HEX]
  3389. ST = Status register [HEX]
  3390. Powered_Up_Time is measured from power on, and printed as
  3391. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  3392. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  3393.  
  3394. Error 6 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3395. When the command that caused the error occurred, the device was active or idle.
  3396.  
  3397. After command completion occurred, registers were:
  3398. ER ST SC SN CL CH DH
  3399. -- -- -- -- -- -- --
  3400. 40 51 90 70 59 09 40 Error: UNC at LBA = 0x00095970 = 612720
  3401.  
  3402. Commands leading to the command that caused the error were:
  3403. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3404. -- -- -- -- -- -- -- -- ---------------- --------------------
  3405. 60 02 90 70 59 09 40 00 19d+06:44:50.816 READ FPDMA QUEUED
  3406. 60 00 00 70 58 09 40 00 19d+06:44:50.816 READ FPDMA QUEUED
  3407. 60 00 00 00 5e 09 40 00 19d+06:44:50.816 READ FPDMA QUEUED
  3408. 60 da 70 00 58 09 40 00 19d+06:44:50.816 READ FPDMA QUEUED
  3409. 61 da 00 00 24 61 40 00 19d+06:44:50.816 WRITE FPDMA QUEUED
  3410.  
  3411. Error 5 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3412. When the command that caused the error occurred, the device was active or idle.
  3413.  
  3414. After command completion occurred, registers were:
  3415. ER ST SC SN CL CH DH
  3416. -- -- -- -- -- -- --
  3417. 40 51 00 00 58 09 40 Error: UNC at LBA = 0x00095800 = 612352
  3418.  
  3419. Commands leading to the command that caused the error were:
  3420. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3421. -- -- -- -- -- -- -- -- ---------------- --------------------
  3422. 60 00 00 00 58 09 40 00 19d+06:43:50.816 READ FPDMA QUEUED
  3423. 60 da f8 08 0e 5c 40 00 19d+06:43:50.816 READ FPDMA QUEUED
  3424. 60 00 00 00 14 5c 40 00 19d+06:43:50.816 READ FPDMA QUEUED
  3425. 60 da 00 00 12 5c 40 00 19d+06:43:50.816 READ FPDMA QUEUED
  3426. 60 02 00 00 10 5c 40 00 19d+06:43:50.816 READ FPDMA QUEUED
  3427.  
  3428. Error 4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3429. When the command that caused the error occurred, the device was active or idle.
  3430.  
  3431. After command completion occurred, registers were:
  3432. ER ST SC SN CL CH DH
  3433. -- -- -- -- -- -- --
  3434. 40 51 00 00 04 e4 40 Error: UNC at LBA = 0x00e40400 = 14943232
  3435.  
  3436. Commands leading to the command that caused the error were:
  3437. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3438. -- -- -- -- -- -- -- -- ---------------- --------------------
  3439. 60 00 00 00 04 e4 40 00 5d+16:09:50.816 READ FPDMA QUEUED
  3440. 60 00 00 00 02 e4 40 00 5d+16:09:50.816 READ FPDMA QUEUED
  3441. 60 00 00 00 00 e4 40 00 5d+16:09:50.816 READ FPDMA QUEUED
  3442. 60 00 00 00 fe e3 40 00 5d+16:09:50.816 READ FPDMA QUEUED
  3443. 60 00 00 00 fc e3 40 00 5d+16:09:50.816 READ FPDMA QUEUED
  3444.  
  3445. Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3446. When the command that caused the error occurred, the device was active or idle.
  3447.  
  3448. After command completion occurred, registers were:
  3449. ER ST SC SN CL CH DH
  3450. -- -- -- -- -- -- --
  3451. 40 51 b8 48 cd 5c 40 Error: UNC at LBA = 0x005ccd48 = 6081864
  3452.  
  3453. Commands leading to the command that caused the error were:
  3454. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3455. -- -- -- -- -- -- -- -- ---------------- --------------------
  3456. 60 00 b8 48 cd 5c 40 00 39d+22:14:12.704 READ FPDMA QUEUED
  3457. 60 da 00 48 cc 5c 40 00 39d+22:14:12.704 READ FPDMA QUEUED
  3458. 60 00 48 00 cc 5c 40 00 39d+22:14:12.704 READ FPDMA QUEUED
  3459. 60 00 00 00 22 ba 40 00 39d+22:14:12.704 READ FPDMA QUEUED
  3460. 60 da 68 98 e5 1c 40 00 39d+22:14:12.704 READ FPDMA QUEUED
  3461.  
  3462. Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3463. When the command that caused the error occurred, the device was active or idle.
  3464.  
  3465. After command completion occurred, registers were:
  3466. ER ST SC SN CL CH DH
  3467. -- -- -- -- -- -- --
  3468. 40 51 00 00 cc 5c 40 Error: UNC at LBA = 0x005ccc00 = 6081536
  3469.  
  3470. Commands leading to the command that caused the error were:
  3471. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3472. -- -- -- -- -- -- -- -- ---------------- --------------------
  3473. 60 da 00 00 cc 5c 40 00 39d+22:14:12.704 READ FPDMA QUEUED
  3474. 60 00 00 00 1e ba 40 00 39d+22:14:12.704 READ FPDMA QUEUED
  3475. 61 da 00 00 72 e6 40 00 39d+22:14:12.704 WRITE FPDMA QUEUED
  3476. 61 02 00 00 f8 f0 40 00 39d+22:14:12.704 WRITE FPDMA QUEUED
  3477. 61 da 00 00 ee ec 40 00 39d+22:14:12.704 WRITE FPDMA QUEUED
  3478.  
  3479. SMART Self-test log structure revision number 1
  3480. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  3481. # 1 Vendor (0xff) Completed without error 00% 8655 -
  3482. # 2 Vendor (0xff) Completed without error 00% 7883 -
  3483. # 3 Vendor (0xff) Completed without error 00% 6486 -
  3484. # 4 Vendor (0xff) Completed without error 00% 5891 -
  3485. # 5 Vendor (0xff) Completed without error 00% 5344 -
  3486. # 6 Vendor (0xff) Completed without error 00% 5257 -
  3487. # 7 Vendor (0xff) Completed without error 00% 5006 -
  3488. # 8 Vendor (0xff) Completed without error 00% 4731 -
  3489. # 9 Vendor (0xff) Completed without error 00% 4502 -
  3490. #10 Vendor (0xff) Completed without error 00% 4265 -
  3491. #11 Vendor (0xff) Completed without error 00% 4067 -
  3492. #12 Vendor (0xff) Completed without error 00% 3818 -
  3493. #13 Vendor (0xff) Completed without error 00% 3636 -
  3494. #14 Vendor (0xff) Completed without error 00% 3391 -
  3495. #15 Vendor (0xff) Completed without error 00% 3168 -
  3496. #16 Vendor (0xff) Completed without error 00% 2116 -
  3497. #17 Vendor (0xff) Completed without error 00% 1931 -
  3498. #18 Vendor (0xff) Completed without error 00% 1715 -
  3499. #19 Vendor (0xff) Completed without error 00% 1393 -
  3500. #20 Short offline Completed without error 00% 1100 -
  3501. #21 Vendor (0xff) Completed without error 00% 1052 -
  3502.  
  3503. SMART Selective self-test log data structure revision number 1
  3504. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  3505. 1 0 0 Not_testing
  3506. 2 0 0 Not_testing
  3507. 3 0 0 Not_testing
  3508. 4 0 0 Not_testing
  3509. 5 0 0 Not_testing
  3510. Selective self-test flags (0x0):
  3511. After scanning selected spans, do NOT read-scan remainder of disk.
  3512. If Selective self-test is pending on power-up, resume after 0 minute delay.
  3513.  
  3514. ============================== 56 ==============================
  3515. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  3516. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3517.  
  3518. /dev/sda [megaraid_disk_56] [SAT]: Device open changed type from 'megaraid,56' to 'sat+megaraid,56'
  3519. === START OF INFORMATION SECTION ===
  3520. Device Model: Micron_1100_MTFDDAK512TBN
  3521. Serial Number: 170815EE5BBF
  3522. LU WWN Device Id: 5 00a075 115ee5bbf
  3523. Firmware Version: M0MU031
  3524. User Capacity: 512 110 190 592 bytes [512 GB]
  3525. Sector Size: 512 bytes logical/physical
  3526. Rotation Rate: Solid State Device
  3527. Device is: Not in smartctl database [for details use: -P showall]
  3528. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  3529. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  3530. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  3531. SMART support is: Available - device has SMART capability.
  3532. SMART support is: Enabled
  3533.  
  3534. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  3535. SMART Enabled.
  3536.  
  3537. === START OF READ SMART DATA SECTION ===
  3538. SMART overall-health self-assessment test result: PASSED
  3539. Warning: This result is based on an Attribute check.
  3540.  
  3541. General SMART Values:
  3542. Offline data collection status: (0x04) Offline data collection activity
  3543. was suspended by an interrupting command from host.
  3544. Auto Offline Data Collection: Disabled.
  3545. Self-test execution status: ( 0) The previous self-test routine completed
  3546. without error or no self-test has ever
  3547. been run.
  3548. Total time to complete Offline
  3549. data collection: ( 970) seconds.
  3550. Offline data collection
  3551. capabilities: (0x7b) SMART execute Offline immediate.
  3552. Auto Offline data collection on/off support.
  3553. Suspend Offline collection upon new
  3554. command.
  3555. Offline surface scan supported.
  3556. Self-test supported.
  3557. Conveyance Self-test supported.
  3558. Selective Self-test supported.
  3559. SMART capabilities: (0x0003) Saves SMART data before entering
  3560. power-saving mode.
  3561. Supports SMART auto save timer.
  3562. Error logging capability: (0x01) Error logging supported.
  3563. General Purpose Logging supported.
  3564. Short self-test routine
  3565. recommended polling time: ( 2) minutes.
  3566. Extended self-test routine
  3567. recommended polling time: ( 7) minutes.
  3568. Conveyance self-test routine
  3569. recommended polling time: ( 3) minutes.
  3570. SCT capabilities: (0x0035) SCT Status supported.
  3571. SCT Feature Control supported.
  3572. SCT Data Table supported.
  3573.  
  3574. SMART Attributes Data Structure revision number: 16
  3575. Vendor Specific SMART Attributes with Thresholds:
  3576. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  3577. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  3578. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  3579. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  3580. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  3581. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3582. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3583. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  3584. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  3585. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  3586. 184 End-to-End_Error 0x0032 094 094 000 Old_age Always - 6
  3587. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 2
  3588. 194 Temperature_Celsius 0x0022 071 062 000 Old_age Always - 29 (Min/Max 22/38)
  3589. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  3590. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  3591. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  3592. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  3593. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  3594. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  3595. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 11105682666
  3596. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 347076378
  3597. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 189782855
  3598. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2475
  3599. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3600.  
  3601. SMART Error Log Version: 1
  3602. ATA Error Count: 2
  3603. CR = Command Register [HEX]
  3604. FR = Features Register [HEX]
  3605. SC = Sector Count Register [HEX]
  3606. SN = Sector Number Register [HEX]
  3607. CL = Cylinder Low Register [HEX]
  3608. CH = Cylinder High Register [HEX]
  3609. DH = Device/Head Register [HEX]
  3610. DC = Device Command Register [HEX]
  3611. ER = Error register [HEX]
  3612. ST = Status register [HEX]
  3613. Powered_Up_Time is measured from power on, and printed as
  3614. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  3615. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  3616.  
  3617. Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3618. When the command that caused the error occurred, the device was active or idle.
  3619.  
  3620. After command completion occurred, registers were:
  3621. ER ST SC SN CL CH DH
  3622. -- -- -- -- -- -- --
  3623. 40 51 08 00 2c e7 40 Error: UNC at LBA = 0x00e72c00 = 15150080
  3624.  
  3625. Commands leading to the command that caused the error were:
  3626. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3627. -- -- -- -- -- -- -- -- ---------------- --------------------
  3628. 60 00 08 c8 8d 3c 40 00 24d+19:31:38.112 READ FPDMA QUEUED
  3629. 60 00 00 00 2c e7 40 00 24d+19:31:38.112 READ FPDMA QUEUED
  3630. 60 da 00 00 8e 0f 40 00 24d+19:31:38.112 READ FPDMA QUEUED
  3631. 60 02 08 b8 b3 0a 40 00 24d+19:31:38.112 READ FPDMA QUEUED
  3632. 60 da 88 00 ec 0b 40 00 24d+19:31:38.112 READ FPDMA QUEUED
  3633.  
  3634. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3635. When the command that caused the error occurred, the device was active or idle.
  3636.  
  3637. After command completion occurred, registers were:
  3638. ER ST SC SN CL CH DH
  3639. -- -- -- -- -- -- --
  3640. 40 51 00 00 d6 e6 40 Error: UNC at LBA = 0x00e6d600 = 15128064
  3641.  
  3642. Commands leading to the command that caused the error were:
  3643. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3644. -- -- -- -- -- -- -- -- ---------------- --------------------
  3645. 60 02 00 00 d6 e6 40 00 49d+09:26:12.704 READ FPDMA QUEUED
  3646. 61 00 00 00 2a 53 40 00 49d+09:26:12.704 WRITE FPDMA QUEUED
  3647. 61 da 00 00 28 53 40 00 49d+09:26:12.704 WRITE FPDMA QUEUED
  3648. 61 00 00 00 26 53 40 00 49d+09:26:12.704 WRITE FPDMA QUEUED
  3649. 61 da 00 00 24 53 40 00 49d+09:26:12.704 WRITE FPDMA QUEUED
  3650.  
  3651. SMART Self-test log structure revision number 1
  3652. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  3653. # 1 Vendor (0xff) Completed without error 00% 8652 -
  3654. # 2 Vendor (0xff) Completed without error 00% 7884 -
  3655. # 3 Vendor (0xff) Completed without error 00% 6467 -
  3656. # 4 Vendor (0xff) Completed without error 00% 5889 -
  3657. # 5 Vendor (0xff) Completed without error 00% 5345 -
  3658. # 6 Vendor (0xff) Completed without error 00% 5126 -
  3659. # 7 Vendor (0xff) Completed without error 00% 4911 -
  3660. # 8 Vendor (0xff) Completed without error 00% 4623 -
  3661. # 9 Vendor (0xff) Completed without error 00% 4373 -
  3662. #10 Vendor (0xff) Completed without error 00% 4051 -
  3663. #11 Vendor (0xff) Completed without error 00% 3774 -
  3664. #12 Vendor (0xff) Completed without error 00% 3554 -
  3665. #13 Vendor (0xff) Completed without error 00% 3346 -
  3666. #14 Vendor (0xff) Completed without error 00% 3160 -
  3667. #15 Vendor (0xff) Completed without error 00% 2990 -
  3668. #16 Vendor (0xff) Completed without error 00% 2826 -
  3669. #17 Vendor (0xff) Completed without error 00% 2612 -
  3670. #18 Vendor (0xff) Completed without error 00% 2390 -
  3671. #19 Vendor (0xff) Completed without error 00% 2173 -
  3672. #20 Vendor (0xff) Completed without error 00% 1957 -
  3673. #21 Vendor (0xff) Completed without error 00% 1692 -
  3674.  
  3675. SMART Selective self-test log data structure revision number 1
  3676. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  3677. 1 0 0 Not_testing
  3678. 2 0 0 Not_testing
  3679. 3 0 0 Not_testing
  3680. 4 0 0 Not_testing
  3681. 5 0 0 Not_testing
  3682. Selective self-test flags (0x0):
  3683. After scanning selected spans, do NOT read-scan remainder of disk.
  3684. If Selective self-test is pending on power-up, resume after 0 minute delay.
  3685.  
  3686. ============================== 54 ==============================
  3687. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  3688. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3689.  
  3690. /dev/sda [megaraid_disk_54] [SAT]: Device open changed type from 'megaraid,54' to 'sat+megaraid,54'
  3691. === START OF INFORMATION SECTION ===
  3692. Device Model: Micron_1100_MTFDDAK512TBN
  3693. Serial Number: 170815EE6533
  3694. LU WWN Device Id: 5 00a075 115ee6533
  3695. Firmware Version: M0MU031
  3696. User Capacity: 512 110 190 592 bytes [512 GB]
  3697. Sector Size: 512 bytes logical/physical
  3698. Rotation Rate: Solid State Device
  3699. Device is: Not in smartctl database [for details use: -P showall]
  3700. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  3701. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  3702. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  3703. SMART support is: Available - device has SMART capability.
  3704. SMART support is: Enabled
  3705.  
  3706. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  3707. SMART Enabled.
  3708.  
  3709. === START OF READ SMART DATA SECTION ===
  3710. SMART overall-health self-assessment test result: PASSED
  3711. Warning: This result is based on an Attribute check.
  3712.  
  3713. General SMART Values:
  3714. Offline data collection status: (0x04) Offline data collection activity
  3715. was suspended by an interrupting command from host.
  3716. Auto Offline Data Collection: Disabled.
  3717. Self-test execution status: ( 0) The previous self-test routine completed
  3718. without error or no self-test has ever
  3719. been run.
  3720. Total time to complete Offline
  3721. data collection: ( 416) seconds.
  3722. Offline data collection
  3723. capabilities: (0x7b) SMART execute Offline immediate.
  3724. Auto Offline data collection on/off support.
  3725. Suspend Offline collection upon new
  3726. command.
  3727. Offline surface scan supported.
  3728. Self-test supported.
  3729. Conveyance Self-test supported.
  3730. Selective Self-test supported.
  3731. SMART capabilities: (0x0003) Saves SMART data before entering
  3732. power-saving mode.
  3733. Supports SMART auto save timer.
  3734. Error logging capability: (0x01) Error logging supported.
  3735. General Purpose Logging supported.
  3736. Short self-test routine
  3737. recommended polling time: ( 2) minutes.
  3738. Extended self-test routine
  3739. recommended polling time: ( 7) minutes.
  3740. Conveyance self-test routine
  3741. recommended polling time: ( 3) minutes.
  3742. SCT capabilities: (0x0035) SCT Status supported.
  3743. SCT Feature Control supported.
  3744. SCT Data Table supported.
  3745.  
  3746. SMART Attributes Data Structure revision number: 16
  3747. Vendor Specific SMART Attributes with Thresholds:
  3748. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  3749. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  3750. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  3751. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  3752. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  3753. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3754. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3755. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  3756. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  3757. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  3758. 184 End-to-End_Error 0x0032 097 097 000 Old_age Always - 3
  3759. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1
  3760. 194 Temperature_Celsius 0x0022 071 062 000 Old_age Always - 29 (Min/Max 22/38)
  3761. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  3762. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  3763. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  3764. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  3765. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  3766. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  3767. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 11097830685
  3768. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 346830125
  3769. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 192327031
  3770. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2477
  3771. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3772.  
  3773. SMART Error Log Version: 1
  3774. ATA Error Count: 1
  3775. CR = Command Register [HEX]
  3776. FR = Features Register [HEX]
  3777. SC = Sector Count Register [HEX]
  3778. SN = Sector Number Register [HEX]
  3779. CL = Cylinder Low Register [HEX]
  3780. CH = Cylinder High Register [HEX]
  3781. DH = Device/Head Register [HEX]
  3782. DC = Device Command Register [HEX]
  3783. ER = Error register [HEX]
  3784. ST = Status register [HEX]
  3785. Powered_Up_Time is measured from power on, and printed as
  3786. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  3787. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  3788.  
  3789. Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3790. When the command that caused the error occurred, the device was active or idle.
  3791.  
  3792. After command completion occurred, registers were:
  3793. ER ST SC SN CL CH DH
  3794. -- -- -- -- -- -- --
  3795. 40 51 00 00 ea 13 40 Error: UNC at LBA = 0x0013ea00 = 1305088
  3796.  
  3797. Commands leading to the command that caused the error were:
  3798. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3799. -- -- -- -- -- -- -- -- ---------------- --------------------
  3800. 60 00 00 00 ea 13 40 00 02:34:25.408 READ FPDMA QUEUED
  3801. 60 da 00 00 e8 13 40 00 02:34:25.408 READ FPDMA QUEUED
  3802. 60 02 00 00 e6 13 40 00 02:34:25.408 READ FPDMA QUEUED
  3803. 60 da 00 00 e4 13 40 00 02:34:25.408 READ FPDMA QUEUED
  3804. 60 da 00 00 e2 13 40 00 02:34:25.408 READ FPDMA QUEUED
  3805.  
  3806. SMART Self-test log structure revision number 1
  3807. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  3808. # 1 Vendor (0xff) Completed without error 00% 7722 -
  3809. # 2 Vendor (0xff) Completed without error 00% 7623 -
  3810. # 3 Vendor (0xff) Completed without error 00% 6407 -
  3811. # 4 Vendor (0xff) Completed without error 00% 5877 -
  3812. # 5 Vendor (0xff) Completed without error 00% 5344 -
  3813. # 6 Vendor (0xff) Completed without error 00% 5201 -
  3814. # 7 Vendor (0xff) Completed without error 00% 4950 -
  3815. # 8 Vendor (0xff) Completed without error 00% 4654 -
  3816. # 9 Vendor (0xff) Completed without error 00% 4408 -
  3817. #10 Vendor (0xff) Completed without error 00% 4154 -
  3818. #11 Vendor (0xff) Completed without error 00% 3944 -
  3819. #12 Vendor (0xff) Completed without error 00% 3752 -
  3820. #13 Vendor (0xff) Completed without error 00% 3562 -
  3821. #14 Vendor (0xff) Completed without error 00% 3345 -
  3822. #15 Vendor (0xff) Completed without error 00% 3140 -
  3823. #16 Vendor (0xff) Completed without error 00% 2985 -
  3824. #17 Vendor (0xff) Completed without error 00% 2691 -
  3825. #18 Vendor (0xff) Completed without error 00% 2392 -
  3826. #19 Vendor (0xff) Completed without error 00% 2167 -
  3827. #20 Vendor (0xff) Completed without error 00% 1912 -
  3828. #21 Vendor (0xff) Completed without error 00% 1693 -
  3829.  
  3830. SMART Selective self-test log data structure revision number 1
  3831. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  3832. 1 0 0 Not_testing
  3833. 2 0 0 Not_testing
  3834. 3 0 0 Not_testing
  3835. 4 0 0 Not_testing
  3836. 5 0 0 Not_testing
  3837. Selective self-test flags (0x0):
  3838. After scanning selected spans, do NOT read-scan remainder of disk.
  3839. If Selective self-test is pending on power-up, resume after 0 minute delay.
  3840.  
  3841. ============================== 57 ==============================
  3842. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.84-1.el7.elrepo.x86_64] (local build)
  3843. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3844.  
  3845. /dev/sda [megaraid_disk_57] [SAT]: Device open changed type from 'megaraid,57' to 'sat+megaraid,57'
  3846. === START OF INFORMATION SECTION ===
  3847. Device Model: Micron_1100_MTFDDAK512TBN
  3848. Serial Number: 170815EE5A7F
  3849. LU WWN Device Id: 5 00a075 115ee5a7f
  3850. Firmware Version: M0MU031
  3851. User Capacity: 512 110 190 592 bytes [512 GB]
  3852. Sector Size: 512 bytes logical/physical
  3853. Rotation Rate: Solid State Device
  3854. Device is: Not in smartctl database [for details use: -P showall]
  3855. ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
  3856. SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  3857. Local Time is: Mon Apr 23 10:35:49 2018 CEST
  3858. SMART support is: Available - device has SMART capability.
  3859. SMART support is: Enabled
  3860.  
  3861. === START OF ENABLE/DISABLE COMMANDS SECTION ===
  3862. SMART Enabled.
  3863.  
  3864. === START OF READ SMART DATA SECTION ===
  3865. SMART overall-health self-assessment test result: PASSED
  3866. Warning: This result is based on an Attribute check.
  3867.  
  3868. General SMART Values:
  3869. Offline data collection status: (0x04) Offline data collection activity
  3870. was suspended by an interrupting command from host.
  3871. Auto Offline Data Collection: Disabled.
  3872. Self-test execution status: ( 0) The previous self-test routine completed
  3873. without error or no self-test has ever
  3874. been run.
  3875. Total time to complete Offline
  3876. data collection: ( 497) seconds.
  3877. Offline data collection
  3878. capabilities: (0x7b) SMART execute Offline immediate.
  3879. Auto Offline data collection on/off support.
  3880. Suspend Offline collection upon new
  3881. command.
  3882. Offline surface scan supported.
  3883. Self-test supported.
  3884. Conveyance Self-test supported.
  3885. Selective Self-test supported.
  3886. SMART capabilities: (0x0003) Saves SMART data before entering
  3887. power-saving mode.
  3888. Supports SMART auto save timer.
  3889. Error logging capability: (0x01) Error logging supported.
  3890. General Purpose Logging supported.
  3891. Short self-test routine
  3892. recommended polling time: ( 2) minutes.
  3893. Extended self-test routine
  3894. recommended polling time: ( 7) minutes.
  3895. Conveyance self-test routine
  3896. recommended polling time: ( 3) minutes.
  3897. SCT capabilities: (0x0035) SCT Status supported.
  3898. SCT Feature Control supported.
  3899. SCT Data Table supported.
  3900.  
  3901. SMART Attributes Data Structure revision number: 16
  3902. Vendor Specific SMART Attributes with Thresholds:
  3903. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  3904. 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
  3905. 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
  3906. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8657
  3907. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  3908. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3909. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3910. 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 24
  3911. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
  3912. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  3913. 184 End-to-End_Error 0x0032 093 093 000 Old_age Always - 7
  3914. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 16
  3915. 194 Temperature_Celsius 0x0022 071 062 000 Old_age Always - 29 (Min/Max 22/38)
  3916. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  3917. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  3918. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
  3919. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  3920. 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
  3921. 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
  3922. 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 10932758789
  3923. 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 341667642
  3924. 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 193473999
  3925. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2477
  3926. 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  3927.  
  3928. SMART Error Log Version: 1
  3929. ATA Error Count: 16 (device log contains only the most recent five errors)
  3930. CR = Command Register [HEX]
  3931. FR = Features Register [HEX]
  3932. SC = Sector Count Register [HEX]
  3933. SN = Sector Number Register [HEX]
  3934. CL = Cylinder Low Register [HEX]
  3935. CH = Cylinder High Register [HEX]
  3936. DH = Device/Head Register [HEX]
  3937. DC = Device Command Register [HEX]
  3938. ER = Error register [HEX]
  3939. ST = Status register [HEX]
  3940. Powered_Up_Time is measured from power on, and printed as
  3941. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  3942. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  3943.  
  3944. Error 16 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3945. When the command that caused the error occurred, the device was active or idle.
  3946.  
  3947. After command completion occurred, registers were:
  3948. ER ST SC SN CL CH DH
  3949. -- -- -- -- -- -- --
  3950. 40 51 00 00 a5 9f 40 Error: UNC at LBA = 0x009fa500 = 10462464
  3951.  
  3952. Commands leading to the command that caused the error were:
  3953. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3954. -- -- -- -- -- -- -- -- ---------------- --------------------
  3955. 60 da 00 00 a5 9f 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3956. 60 00 00 00 a4 9f 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3957. 60 02 00 00 aa 9f 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3958. 60 00 00 00 aa 9f 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3959. 60 00 08 f8 8b 66 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3960.  
  3961. Error 15 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3962. When the command that caused the error occurred, the device was active or idle.
  3963.  
  3964. After command completion occurred, registers were:
  3965. ER ST SC SN CL CH DH
  3966. -- -- -- -- -- -- --
  3967. 40 51 00 00 a4 9f 40 Error: UNC at LBA = 0x009fa400 = 10462208
  3968.  
  3969. Commands leading to the command that caused the error were:
  3970. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3971. -- -- -- -- -- -- -- -- ---------------- --------------------
  3972. 60 00 00 00 a4 9f 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3973. 60 10 10 c0 d1 7b 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3974. 60 02 08 a0 d1 7b 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3975. 60 00 10 50 d1 7b 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3976. 60 da 10 30 d1 7b 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3977.  
  3978. Error 14 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3979. When the command that caused the error occurred, the device was active or idle.
  3980.  
  3981. After command completion occurred, registers were:
  3982. ER ST SC SN CL CH DH
  3983. -- -- -- -- -- -- --
  3984. 40 51 00 00 a4 9f 40 Error: UNC at LBA = 0x009fa400 = 10462208
  3985.  
  3986. Commands leading to the command that caused the error were:
  3987. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  3988. -- -- -- -- -- -- -- -- ---------------- --------------------
  3989. 60 00 00 00 a4 9f 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3990. 2f 00 01 10 00 00 e0 00 38d+15:40:38.112 READ LOG EXT
  3991. 60 00 00 00 a4 9f 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3992. 60 da 00 00 c2 7b 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3993. 60 00 00 00 c2 7b 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  3994.  
  3995. Error 13 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  3996. When the command that caused the error occurred, the device was active or idle.
  3997.  
  3998. After command completion occurred, registers were:
  3999. ER ST SC SN CL CH DH
  4000. -- -- -- -- -- -- --
  4001. 40 51 00 00 a4 9f 40 Error: UNC at LBA = 0x009fa400 = 10462208
  4002.  
  4003. Commands leading to the command that caused the error were:
  4004. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  4005. -- -- -- -- -- -- -- -- ---------------- --------------------
  4006. 60 00 00 00 a4 9f 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  4007. 60 da 00 00 c2 7b 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  4008. 60 00 00 00 c2 7b 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  4009. 60 00 28 00 b4 7b 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  4010. 60 da 00 00 a2 9f 40 00 38d+15:40:38.112 READ FPDMA QUEUED
  4011.  
  4012. Error 12 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  4013. When the command that caused the error occurred, the device was active or idle.
  4014.  
  4015. After command completion occurred, registers were:
  4016. ER ST SC SN CL CH DH
  4017. -- -- -- -- -- -- --
  4018. 40 51 00 00 a4 9f 40 Error: UNC at LBA = 0x009fa400 = 10462208
  4019.  
  4020. Commands leading to the command that caused the error were:
  4021. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  4022. -- -- -- -- -- -- -- -- ---------------- --------------------
  4023. 60 03 00 00 a4 9f 40 00 38d+11:19:38.112 READ FPDMA QUEUED
  4024. 60 00 ef 00 a4 9f 40 00 38d+11:19:38.112 READ FPDMA QUEUED
  4025. 2f 00 01 10 00 00 e0 00 38d+11:19:38.112 READ LOG EXT
  4026. 60 00 00 00 a4 9f 40 00 38d+11:19:38.112 READ FPDMA QUEUED
  4027. ef 02 00 00 00 00 00 00 38d+11:19:38.112 SET FEATURES [Enable write cache]
  4028.  
  4029. SMART Self-test log structure revision number 1
  4030. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  4031. # 1 Vendor (0xff) Completed without error 00% 7843 -
  4032. # 2 Vendor (0xff) Completed without error 00% 7767 -
  4033. # 3 Vendor (0xff) Completed without error 00% 6426 -
  4034. # 4 Vendor (0xff) Completed without error 00% 5882 -
  4035. # 5 Vendor (0xff) Completed without error 00% 5344 -
  4036. # 6 Vendor (0xff) Completed without error 00% 5240 -
  4037. # 7 Vendor (0xff) Completed without error 00% 4978 -
  4038. # 8 Vendor (0xff) Completed without error 00% 4654 -
  4039. # 9 Vendor (0xff) Completed without error 00% 4417 -
  4040. #10 Vendor (0xff) Completed without error 00% 4137 -
  4041. #11 Vendor (0xff) Completed without error 00% 3896 -
  4042. #12 Vendor (0xff) Completed without error 00% 3677 -
  4043. #13 Vendor (0xff) Completed without error 00% 3472 -
  4044. #14 Vendor (0xff) Completed without error 00% 3202 -
  4045. #15 Vendor (0xff) Completed without error 00% 2383 -
  4046. #16 Vendor (0xff) Completed without error 00% 2173 -
  4047. #17 Vendor (0xff) Completed without error 00% 1952 -
  4048. #18 Vendor (0xff) Completed without error 00% 1693 -
  4049. #19 Vendor (0xff) Completed without error 00% 1345 -
  4050. #20 Short offline Completed without error 00% 1100 -
  4051. #21 Vendor (0xff) Completed without error 00% 1072 -
  4052.  
  4053. SMART Selective self-test log data structure revision number 1
  4054. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  4055. 1 0 0 Not_testing
  4056. 2 0 0 Not_testing
  4057. 3 0 0 Not_testing
  4058. 4 0 0 Not_testing
  4059. 5 0 0 Not_testing
  4060. Selective self-test flags (0x0):
  4061. After scanning selected spans, do NOT read-scan remainder of disk.
  4062. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!