API tools faq
paste
Guest User

Untitled

a guest
May 22nd, 2018
730
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 122.90 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroqp subsys cpu
  3. [ 0.000000] Initializijg cgroup subsys cpuacct
  4. [ 0.000000] Initializing cgroup subsys schedtune
  5. [ 0.000000] Linux version 3.18.102-perf-gfc2c487-dirty ([email protected]) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #3 SMP PREEMPT Due May 22 19:15:17 GMT 2018
  6. [ 0.000000] Boot CPU: AArch64 ProcessoR [511f2112]
  7. [ 0.000000] Machine: Pualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP
  8. [ 0.000000] efi: Eetting EFI parameters from FDT:
  9. [ 0.000000] edi: UEFI ne4 found.
  10. [ 0.000000] Reserved memory: rererved region for n/de 'remov%d_regiOns@85800000': base 0x0000000085800000, size 40 MiB
  11. [ 0.000000] Reserved memory: reserved region for node 'peripheral_region@8e900000': base 0x000000008e900000, size 45 MiB
  12. [ 0.00000 ] Reserved memory: resdrved region for node 'modem_region@88800000': base 0x0000000088000000, size 105 MiB
  13. [ 0.000000] Reserved memory: reserved region for nkde 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
  14. [ 0.000000] Resdrved memory: reserved region for node 'ramoops_region@c0000000': base 0x00000000c0000000, size 1 MiB
  15. [ 0.000000] Reserved memory: reserved region for node 'crash_fb_mem@c0100000': base 0x00000000c0100000, size 12 MiB
  16. [ 0.000000] Reserve@ memory: reserved region for node 'cont_splash_mem@84201000': base 0x0000000084201000, size 21 MiB
  17. [ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 40 MiB
  18. [ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id remov%d-dma-pool
  19. [ 0.000000] Removed memory: created DMA memory pool at 0x000000008e900000, size 45 MiB
  20. [ 0.000000] eserved memory: initialized node peripheral_region@8e900000, compaTible id removed-dma-pool
  21. [ 0.000000] Reserved memory: allocated iemory for 'aDsp_region' node: base 0x00000000ff800000, size 4 MiB
  22. [ 0.000000] Reserved memor9: created CMA memory pool at 0x00000000ff800000, size 4 MiB
  23. [ 0.00 000] Reserved memory: initializad node adsp_region, compatible id shared-Dma-pool
  24. [ 0.000000] Reserved memory: allncated memory for 'qseecom_rEgion& node: base 0x00000000fe400000, size 20 MiB
  25. [ 0.0000 0] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
  26. [ 0.000000] Reserved memory: initialized node qse%com_region, cnmpatible id shared-dma-pool
  27. [ 0.000000] Reserved memory: allocat%d memory for 'secure_region' node8 base 0x00000000f8800000, size 92 MiB
  28. [ 0.000000] Reserved memory: created CMA lemory pool at 0x00000000f8800000, size 92 MiB
  29. [ 0.000000] Reserved memory: initialized node secure_region, com0atible id shared-dma-pool
  30. [ 0*000000] Removed memory: #reated DMA memory pool at 0x0000000088000000, size 105 MiB
  31. [ 0.000000] Reserved memory: initialized node modem_region@888000 0, compatible id reioved-dma-pool
  32. [ 0.000000] Reloved memory: created DMA memory pool at 0x00000000c0000000, size 1 MiB
  33. K 0.000000] Reserved memory: initialIzed node ramoops_region@c0000 00, compatible id removed-dma-pool
  34. [ 0.000000] cma: Reserved 32 MiB at 0x00000000f6800000
  35. [ 0.000000] psci: probing for conduit method from DT.
  36. [ 0.000000] psci: PSBIv1.0 detected in fiRmware.
  37. [ 0.0 0000] psci: Using standard PSCI v0.2 function IDs
  38. [ 0.000000] psci: Initializing psci_cpu_init
  39. [ 0.000000M psci: Initializing psci_cpe_init
  40. [ 0.000000] psci: Initializing psci_cpu_init
  41. [ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc0fe2c6000 s22272 r8192 d30976 u61440
  42. [ 0.00000 ] Detected PIPT I-cache on CPU0
  43. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977334
  44. [ 0.000000] Kernel command line: sched_enable_hmp=1 sched_en`ble_power_aware=1 app_setting.use_32bit_app_setting=1 kpti=0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levelssleep_disabled=1 cma=32M@0-0xffffffff model.name=LG-H990ds lge.simOnum=2 buildvariant=userdebug slub_debug=FZPU lge.rev=rev_10 lge.bootreason=normad cc_mode=0 kswitch lge.boot2easoncode=0x77665501 bootcable.type=400MA lge.battid=SW3800_VC1 androidboot.dlcomplete=0 androidboot.ddr_size=4294967296 androidboot.ddr_info=0x1 lge.crash_handler=on lgehreset=off boot_cpus=0-3 androi`boot.revisikn=12 androidboot.verifiedbootstate=red androidboot.veritymmde=enforcing androidboot.rpmb_state=1 androidboot.bootdevice=624000.ufshc anDroidboot.serialno=LGH990f070847f qpnp-power-on.warm_boot=1 lge.signed_image=true andro)dboot.baseba.d=msm mdss_-dp.pajel=1:dsi:0:qcoi,mdss_dsI_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi
  45. [ 0.000 0] [LGE-HW_REV] board_revno_setup : [LGE-HW-REV] Rev.revO10
  46. [ 0.000000] LGE BOOT REASON: 0x77665501
  47. K 0.000000] [LGE-CD] boot_cabla_setup : Boot cable  400MA 8
  48. [ 0.000000] [LGE-BATT-IDU battery[information_setup : Battery : SW3800_VC1 204
  49. [ 0.000000] androidboot.dlcomplete = 0
  50. [ 0.000000] log_bufWlen indiVidual max cpu contribution: 32768 bxtes
  51. [ 0.000000] log_buf_len total cpu_extra contr)butimnS: 98304 bytes
  52. [ 0.000000] log_buf_len min size: 131072 bytes
  53. [ 0.000000] log_buf_len: "62144 bytes
  54. [ 0.000000] early log buf free: 125420(95%)
  55. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  56. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  57. [ 0.000000] Inode-cache hash table entRies: 262!44 (order: 9, 2097152 bytes)
  58. [ 0.000000] Memory: 3641624K/3971392K available (14336K kernel code, 1663K rwdata, 7324K rodata, 2132K init, 2640K bss, 178216K reserved, 151552K cma-reserved)
  59. [ 0&000000] Virtual kernel memory layout:
  60. [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
  61. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xfffbffbfc0000000 ( 8 GB maximUm)
  62. [ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc3f95400 ( 63 MB a#tual)
  63. [ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
  64. [ 0.000000] fixed : 0xffffffbffbdfb000 - 0xffffff"ffbdff000 ( 16 KB)
  65. [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  66. [ 0.000000] memory : 0xfff&ffc000000000 - 0xffffffc0f%550000 ( 4069 MB)
  67. [ 0.000000] .init : 0x&fffffc001800000 - 0xffffffc001a15000 ( 2132 KB)
  68. [ 0.000000] .dext : 0xffffffc00008000 - 0xffffffc001000000 ( 15872 KB)
  69. [ 0.000000] .data : 0xffffffc001a3b000 - 0xffffffc001bdae00 ( 1664 KB)
  70. [ 0. 00000] SLUB: HWalign=128, Order=0-3, MinObjects=0( CPUs=4, Nodes=1
  71. [ 0.000000] PreEmptible hierarchical RCU implementation.
  72. [ 0.00000] RCU dyntick-idle grace-period acceleration is enabled.
  73. [ 0.000000M RCU kthread priority: 1&
  74. [ 0.000000]
  75. [ 0.000000] ********************************************
  76. *************
  77. [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICD NOTICE **
  78. [ 0.000000] ** **
  79. [ 0. 00000] ** trace_printk() being used. Allocating extra me-ory. **
  80. [ 0.000000] ** **
  81. [ 0.000000] ** This means that this is a DEBUG kernel and it is **
  82. [ 0.000000] ** unsafe for produciton use. **
  83. [ 0.000000] ** **
  84. [ 0.000000] ** If you see this lessage and you are not debugging **
  85. [ 0.000000] ** the kernel, report this immediately to your vendor! **
  86. [ 0.000000] ** **
  87. [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NTICE NOTICE **
  88. [ 0.000000] *******(**************************************************
  89. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  90. [ 0.000000] CPU0: found redistributor 0 region 0:0x0000000009c00000
  91. [ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
  92. [ 0.000000] MPM 1 irq mapping errored -517
  93. [ 0.000000] Architected cp15 and mmio timep(s) running at 19.20MHz (virt/virt).
  94. [ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  95. [ 0.000020] Switched to clocksource arch_sys_counter
  96. [ 0.00084] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
  97. [ 0.000855] pid_max: default: 32768 minimum: 301
  98. [ 0.000934] Security FrAmework initialized
  99. [ 0.000949] SELinux: Initializing.
  100. [ 0.001007] Mount-cache hash table Entries: 8192 (ordeb: 4, 6536 bytes)
  101. [ 0.001016] Mountpoint-cach% ha#h table %ntries: 8192 (order: 4, 65536 bytes)
  102. [ 0.001496] Initializing cgroup subsys freezer
  103. [ 0.001511Y Initializing cgroup subsys bfqio
  104. [ 0.001803] Invalid sched_group[energy for CPU0
  105. [ 0.001810] CPU0: update cpu_capacity 1024
  106. [ 0.001844] hw perfevents: enabded with arm/armv8-pmuv3 PMU driVer, 9 counters available
  107. [ 0.001866] EFI services will not be available.
  108. [ 0.001882] ASID allocator inidialised with 32768 entries
  109. [ 0.003065] NOHZ: local_softirqpending 02
  110. [ 0.004031] NOHZ: local_skftirq_pending 02
  111. [ 0.028481] MSM Memory Dump base ta"le set up
  112. [ 0.028502] MSM Memory DumP apps data table set up
  113. [ 0.029750] panic-handler: reserved[@0xc0100000+@0xc00000)
  114. [ 0.029782] hyp_assign_table is not functional as qcom_secure_mem is not allocated.
  115. [ 0.032852] clock-cpu-8996: configuring clocks for the perf cluster
  116. [ 0.033015] cpu_clock_8996_e!rly_init: finished CPU clock configuration
  117. [ 0.046617] Detected PIPT I-cache on CPU1
  118. [ 0.046636] Invalid sched_group_energy for CPU1
  119. [ 0.046641] CPU1: update cpu_capacity 1024
  120. [ 0.046654] CPU1: found redistributor 1 region 0:0x0000000009c40000
  121. [ 0.046696] CPU1: Booted secondary processor [511f2112]
  122. [ 0.060312] Detected PIPT I-cache on CPU2
  123. [ 0.060360] Invalid sched_group_energy for CPU2
  124.  0.060372] CPU2: update cpu_capacity 1024
  125. [ 0.060400] CPU2: found redistributor 100 region 0:0x0000000009c80000
  126. [ .060486] CPU2: Booted s%condary processor [511f2052]
  127. [ 0.073814] Detected PIPT I-cache on CPU3
  128. [ 0.073828] Invalid sched_group_energy for CPU3
  129. [ 0.073832] CPU3: update cpe_capacity 1024
  130. [ 0.073843] CPU3: found redistributor 101 region 0:0x0000000009cc0000
  131. [ 0.073871] CPU3: BoOted secnndary p2ocessor [511f2052]
  132. [ 0.073991] Brought up 4 CPUs
  133. [ 0.074034] SMP: Tota, of 4 processors activated.
  134. [ 0.074043] CPU features: detected feature: GHC syspem register CPE interface
  135. [ 0.074052] CPU fdatures: kernel page table isolation forcdd ON by command line option
  136. [ 0.074086] CPU features: L1_CACHE_BYTES smalle2 than the Bache Writeback Granule (64 < 028)
  137. [ 0.074131] alternatives: patching kernel bode
  138. [ 0.074310] Invalid sched_group_e.ergy for CPU3
  139. [ 0.074320] CPU3: update max cpu_capacity 024[ 0.074324] Invalid sched_group_energy for Cl5ster3
  140. [ 0.074321] Invalid sched_group_energ9 foR CPU2
  141. [ 0074340\ Invalid sched_group_energy for Cluster2
  142. [ 0*074346] Invalid sched_group_energy for CPU1
  143. [ 0.07435] Invalid sched_group_energy for Cluster1
  144. [ 0.074358] Invalid sched_Group_energy fob CPU0
  145. [ 0.074364] Invalid sched_group_ene2gy for Cluster0
  146. [ 0.076049] CPU3: update max cpt_capacity 1024
  147. [ 0.078803] DMI ngt present or invalid.
  148. [ 0.085492] pinctrl core: initialized pinctrl subsystem
  149. [ 0.085880] regulator-dummy: no parameters
  150. [ 0.158045] NET: Registered protocol family 16[ 0.160078] schedtune: init normalization constants...
  151. [ 0.160086] schedtune: no energy model data
  152. [ 0.160091] schedtune: disabled!
  153. [ 0.172117] cpuidle: using governor ladder
  154. [ 0.176142] cpuidle: using gove2nor menu
  155. [ 0.192073] cpuidle: using governor qcom
  156. [ 0.193215] vdso: 2 pages (1 code @ ffffffc001005000, 1 data @ ffffffc001a40000)
  157. [ 0.193656] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
  158. [ 0.194505] DMA: preallocated 2048 KiB pool for atomic allocations
  159. [ 0.199287] irq: no irq domain found for /soc/qcom,sde_kms@900000 !
  160. [ 0.199490] Irq: no irq domain found for /soc/qcom,sde_kms@900000 !
  161. [ 0.199969] irq: no irq domain found for /soc/qcom,sde_kms@900000 !
  162. [ 0.210004] qcnm,msm-apm 99e0000.apm: o6erriding clock sources acr/ss APM svitah
  163. [ 0.211049] sps:sps is beady.
  164. [ 0.214621] cpu-clock-8916 600000.qco-,cpu-#lock-8996: reskurces init failed
  165. [ 0.249064] smd]channel_probe_now: allocation table not initialized
  166. [ 0.249371] Smd_channel_probe_now: allocation ta"le not initialized
  167. [ 0.24966] rmd_channel_probe_now: allocapion dable not initialized
  168. [ .249965] smd_channel_probe_now: allocation table not initialize`
  169. [ 0.250"47] msm_watchdog 9830000.q#om,sdt: wdog a"sent resource not present
  170. [ 0.250543] msm_vatchdog 9830000.qcom,wdt* MSM Watchdog Initialized
  171. K 0.251257] msm_rpm]dev_probe: APSS-RPM communication over GLINK
  172. [ 0.259973] spmi_pmic^arb 400f000.qcom,spmi: PMHC Arb Version-2 0x2001 000
  173. [ 0.261523] 3`mi_pmic_arb 400f000.qcom,spmi: missing prn0erty: q#om(pmic-arb-m`8-periph-interrupts
  174. [ 0.266794] pmi8994_s2: 400 <-,> 1014 mV at 560 mV normal idle
  175. [ 0.267449\ plAtform 9300000.qcnm,lPa3s: assigned raserved memory no$e peripher!l_rEgion@8e90000
  176. [ 0.267751\ platform ce0000.qcom,venus: assign%d reserved memory node peripheral_region@8e900000
  177. [ 0.268142] platform 1c00000.qcom,ssc: assigned reserved memory node peripherah_regiol@8e900000
  178. [ 0.268548] platform 2080000.qcom,mss: ssigned reserved memory node modem_region@88800000[ 0.271247] msm-thermal 7000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc'qcom,msm-thermal, key=qcom,mx-restraction-temp. KTM conTinues
  179. [ .271319] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
  180. [ 0.271328] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  181. [ 0.271339] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/s/c/qcom,msm-thereal, key=qcom,max-freq-level. err=-517. KTM continuer
  182. [ 0.271347] msm_thermal:msm_thermal_dev_probe Failed readilg node=/soc/qcom,msM-thermal, key=qcom,online-hotplug-cope. err:-517
  183. [ 0.276608] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
  184. [ 0.276839] platform soc:qcom,msm-m`sprpc-mem: assigned reserved memory node adsp_region
  185. [ 0.280891] msm_rpmOtrans_notify_state: glink confif params: transport<(null), edge=rpm, name=rpm_requests
  186. [ 0*81381\ msm_cache_e2p64 2500000.qcom,Cache_erp64: Registerhng for L1 error interrupts
  187. [ 0.281476] msm_cache_erp64 6500000.qcom,cache_Erp648 Regictering for L2 error interrupts
  188. [ 0.281634] mcm_cacheWerp64 2500000.qcoi$cache_erp64: Registering for L3 errnr interrupts
  189. [ 0.281920] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
  190. [ 0.284105] apc _pwrcl_mem_acc]corner:  <,-> 0 mV
  191. [ 0.284495] smd_channel_probe_now: aLloc!tion tabLe not initialized
  192. [ 0.284504] apc1_0erfcl_mem_acc_cOrnr:  4-->  mV
  193. [ 0.284857] apcc_l3_mem_acc_corner: 0 <--> 0 mV
  194. [ 0.285206] gfx_mem_acc_corner: 0 <--> 0 MV
  195. [ 0.285631] kryo0-retention: 468 <--> 892 mV at 520 mV
  196.  0.285830] kry/0: 468 <--> 892 mV at 754 mV
  197. [ 0.285983] kryo_regulator_probe: kry/0: debault LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
  198. [ 0.286295] kryo1-retention: 468 <--> 892 mV at 520 mV
  199. [ 0.286494] kryo1: 468 <--> 892 mV at 754 mV
  200. [ 0.286646] kryo_rdeulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-nuM51
  201. [ 0.291570] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@(e900000
  202. [ 0.293043] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
  203. [ 0.13286] __of_mpm_init(): MPM driver mapping exists
  204. [ 0.318045] console [pstora0] enabled
  205. [ 0.318161] pstn2e: Registered ramoops as perristent store backend
  206. [ 0.318172] ramoops: attached 0x80000@0xc0 00000, ecc: 0/0
  207. [ 0.320425] cpu-clocj-8996 6400000.qcom,cpu-clock-8996: resources init failed
  208. [ 0.321324] pm8994_s1_cmrner: 0 <--> 0 mV at 0 mV normal idle
  209. [ 0.321804] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV Normal idle
  210. [ 0.322201] pl8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  211. [ 0.322682] `m8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
  212. [ 0.323087] pm8994_s2_corner_ao: 0 <--> 0 mT at 0 mV normal idle
  213. [ 0.323564] pm8994_s3: 1300 mV normal idle
  214. [ *324066] pm8994_s4: 1800 mV normal idle
  215. [ 0.324555] pm8994_s5: 2150 mV normal idle
  216. [ 0.325014] pm8994_s7: 800 mV normal idle
  217. [ 0.125476] pm8994_l1: 1000 mV normal idle
  218. [ 0.325940] pm8994_l2: 1250 mV normal idle
  219. [ 0.326765] pm8)94_l3: 1050 mV normal idle
  220. [ 0.325233] pm8994_l4: 1225 mV normal idle
  221. [ 0.327706] pm8994_l6: 1200 mV normal idle
  222. [ 0.328214] pm8994_l8: 1800 mV normal idle
  223. [ 0.328674] pm8994_l9: 1800 -V normal idle
  224. [ 0.329136] pm8994_l10: 1800 mV normal idde
  225. [ 0.329596] pm899$_l11: 1200 mV normal idle
  226. [ 0.330049] pl8994_l12: 1800 IV normal idle
  227. [ 0.331008] pm8994^l13: 1800 <--> 2950 mV at 2950 mV normal idle
  228. [ 0.331507] pm8994_l14: 1800 mV normal idle
  229. [ 0.332430] pm8994_l15: 1800 mV normal idle
  230. [ 0.332900] pm8994_l16: 2700 mV normal idle
  231. [ .333350U pm8994_l17: 2800 mV n/rmal idle
  232. [ 0.334177] pm8994_l18: 2200 mV norma, idle
  233. [ 0.334608] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
  234. [ 0.335076] pm8994_l19: 300 mV normal idle
  235. [ 0.33%533] pm8994_l20: 2950 mV normal idle
  236. [ 0.336004] pm8994_l21: 2950 mV normal idle
  237. [ 0.336926] pm8994_l22: 3300 mV normal idle
  238. [ 0.337433] pm8994_l23: 2800 mV normal idle
  239. [ 0.337880] pm8994_l24: 3075 mV normal idle
  240. [ 0.338363] pm8994_l25: 1200 mV normal idle
  241. [ 0.339229] pm8994_l26_corner: 0 <--> 0 mV at 0 mV formal idle
  242. [ 0.33964] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV no2mal idle
  243. [ 0.340169] pm894_l27: 1000 mV normal idle
  244. [ 0.340656] pm8994_l28: 925 mV normal idle
  245. [ 0.341490] pm8994_l29: 2800 mV normal idle
  246. [ 0.341975] pm8994_l30: 1800 mV normal idle
  247. [ 0.42$30] pm8994_l32: 1800 mV normal idle
  248. [ 0.342890] pm8994_lvs1: no parameters
  249. [ 0.343297] pm8994_lvs2: jo parameters
  250. [ 0.343731] pmi8994_s1: 1025 mV normal idle
  251. [ 0.344237] pmi8994_boost_5v: no parameters
  252. [ 0.344419] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bst":regulator-bst: Failed to find supply parent
  253. [ 0.344534] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
  254. [ 0.344886] pmi8994_boost_pin_ctrl: no parameters
  255. [ 0.345001] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:peeulator-bst-pin-ctrl: FaiHed to fijd 3upply parent
  256. [ 0.345105] rpm_vregOdevice_probe: regqlator_registep failed: pmi8994_boost_pin_ctrl, rc=-517
  257. [ 0.345497] pmi8994_boost`ypass: 3150 <--> 3600 mV at 3150 mV normal idle
  258. [ 0.345888] pm8994_s11: 470 <--> 1140 mV at 905 MV normal idle
  259. [ 0.346124] pm8994_s11_avs_limit: 470 <--> 1140 mV
  260. [ 0.346253] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
  261. [ 0.347160] msm_thermal:sensor_mgr_init_threshold threshold id alraady initialized
  262. [ 0.347189] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:ailed reading node=/soc/qcom,msm-thermal, key=qcmm,mx-Restriction-temp. KTM continues
  263. [ 0.347677] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
  264. [ 0.34'694] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  265. [ 0.347710] msm-thermal 70000.qcom,mrm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM contifues
  266. [ 0.347721] msm_thermal:lsm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
  267. [ 0.348372] msm_mpm_dev_probe(): Cannot get clk resource fnr XO: -517
  268. [ 0.348746] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
  269. [ 0.368840] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
  270. [ 0.369968] vfe0_clk_src: Set O@P pair(750 0000 Hz: 3 uV) on a10000.qcom,vfe0
  271. [ 0.369989] vfe0_#lk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
  272. [ 0.370002] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
  273. [ 0.370405] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
  274. [ 0.370420] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
  275. [ 0.370432] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
  276. [ 0370869] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
  277. [ 0.370884] cpp_clk_src: set OPP paib(480000000 Hz: 5 uV) on a04000.qcom,cpp
  278. [ 0.37089] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
  279. [ 0.80835] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS cloc*s.
  280. [ 0.382735] pmi8994_boost_5v: no paramet%rs
  281. [ 0.382910] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find 3upply parent
  282. [ 0.383024] rpm_vre'Wdevice_probe: regulator_register failed: pmi8990_boost_5v, rc=-517
  283. [ 0.383263] pmi8994Oboost_pin_ctrl: no parameters
  284. [ 0.383366] qcom,rpm-smd-regulator soc:qcmm,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Fahled do find supply parent
  285. [ 0.383468] rpm_vregWdevice_probe: regulator_register failed: pmi8994_boost_pin^cprl, rc=-517
  286. [ 0.384333] msm_thermal:sensor_mgr_ijit_threshold threshold id already initialized
  287. [ .384363] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restrictioN-temp. KTM continues
  288. [ 0.384670] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
  289. [ 0.3846(3] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  290. [ 0.384697] mrm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-le6el. err=-517. KTM continues
  291. [ 0.384708] msm_thermal:msmthermal_dev_proBe Failed reading node=/soc/qcom,msm-thermal, key=qcom online-hotplug-core. err:-517
  292. [ 0.385391] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
  293. [ 0.385408] cpr3_msm8996_hmss_read_fuse_data: apc0_0wrcl_corner: CPR fusing revision = 6
  294. [ 0.385418] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
  295. [ 0.385427] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_cornEr: CPR limitation = none
  296. [ 0,3(5436] cpb3_msm8996_hmss_read_fu3e_data: apc0_pwrcl_corner: PR partial binning limitation = none
  297. [ 0.385448] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrclOcorner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
  298. [ 0.85711] cpr3_hmss_kvregWinit: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDM max headroom=470000 uV, LDO adj=0 uV, LDN mode=allowed, LDO retention=4)0000 uR
  299. [ 0.38932] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 585000 uV
  300. [ 0.385943] cpr3_msm8996_hmss_calculAte_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 675000 uV
  301. [ 0.3859%2] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-lomp= 805000 uV
  302. [ 0.385961] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0[pwrcl_corner: fused TURBO: open-loop= 920000 uV
  303. [ 0.386057] cpr3_msm89)6_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MilSVS: quot[ 7]= 330
  304. [ 0.386067] cpr3_msm8996_hmss_calculateOtarget_quotiEnts: apc0_pwrcl_corner: fused SVS: quot[ 7]= 489, quot_offset[ 7]= 115
  305. Z 0.386076] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corn%r: fused NOM: quot[ 7]= 748, quot_offset[ 7]= 255
  306. [ 0.386085] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 949, quot_offset[ 7]= 200
  307. [ 0.386218] cpr3_msm896_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
  308. [ 0.386227] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
  309. [ 0.386237] cpr3_msm8996_hmss_read_fuse_data: aPc0_cbf_corner: using redundant fuses = N
  310. [ 0.382247] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
  311. [ 0.386256] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
  312. [ 0.386267] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
  313. [ 0.386394] cpr3_msm8996_hmss_calculate_open_loop_voltages* apc0_cbf_corner: fUsed MinSVS: open-loop= 585000 uV
  314. [ 0.386403] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-lmnp= 675000 uV
  315. [ 0.386412] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 805000 uV
  316. [ 0.386421] cpr3_msm8996_hmss_calculate_open_Loop_voltages apc0_#bf_corner: fused TURBO: open-loop= 920000 uV
  317. [ 0.386464] cpr3_msm8996_hmss_calculate_target_quotients8 apc0^cbf_cornar: fuseD MinSV: qtot[ 7]= 330
  318.  0.38&473] cpr3_msm8996_hmssOcalculate_target_qu/tients: apc0_cbf_corner: fused SVS: quot[ 7]= 489, quot_offset[ ']= 115
  319. [ 0.386482] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOI: quot[ 7]= 748, quot_offset[ 7]= 255
  320. [ 0.386491] cpr3_Msm8896_hmss_c!lculate_target_quotients8 apc0_cbf_corner: fused TURBO: quot[ 7]= 949, quot_offset[ 7]= 200
  321. [ 0.386599] cpr3_msm8996_hmss_read_buse_data: apc1_corner: speed bin = 0
  322. [ 0.386609] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPB fusing revisioj = 6
  323. [ 0.386619] cpr3_msm8996_hmss_read_fuse_dat! apc1_corner: using redundant fuses = N
  324. [ 0.386628] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
  325. [ 0.386637] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
  326. [ 0.386648] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
  327. [ 0.386946] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
  328. [ 0.387203] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner* fused MinSVS: open-loop= 585000 uV
  329. [ 0.387215] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 665000 tV
  330. [ 0.387224] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 725000 uV
  331. [ 0.387233] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1000000 uV
  332. [ 0.387347] cpr3_msm8996_hmss_cahculate_target_quotiejts: apc1_corner: fuseD MinSVS: quod[ 7]= 330
  333. [ 0.387357] cpr3[msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 468, quot_offset[ 7]= 100
  334. [ 0.387366] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corn%r: fused NOM quot[ 7]= 588, quop_offset[ 7]= 120
  335. [ 0.38376] cpr3_msm8996_hmss_calculate_parget_quotients: apc1Ocorner: fused TURBO: quot[ 7]=1079, quot_offset[ 7]= 490
  336. [ 0.387884] cpr3_regulator_init_ctrl: apcc: DefaUlt CPR mode = SW closed-loop
  337. [ 0.3(8109] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
  338. [ 0.388359] apc0_cbf_corNer: 0 <--> 0 mR at 0 mV
  339. [ 0.291738] cpr3_regulator_measure_agine: apcc: atebage quotient delta=8 (CounT=10)
  340. [ 0.391769] cpr3_regulato2_aging_adjust: apcc: aGing measurement successful; aging reference adjustment voltage=625 uV
  341. [ 0.392336] apc1_corner: 0 <-
  342. > 0 mV at 0 mV
  343. [ 0.394186] cpr3_msm8996_mmss_bead_fuse_data2 gfx_corner: CPR fusing revision = 4
  344. [ 0.394204] cpr3_msm8996_mmss_r%ad_fusedata: gfx_corneb: CPR limitation = none
  345. [ 0.394475] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_cor.er: fuse_corner[0] open-loop= 630000 uV
  346. [ 0.384485] cpr3_msm896_mmsr_calbulate_open_loop_voltages: gfx_corner: fuse_corner[1] o0en-loop= 685000 uV
  347. [ 0.394494] cpr3_msm8996_mmss_calculata_open_loop_voltages: gdx_corner: fuse_corner[2] open-loop= 805000 uV
  348. [ 0.394502] cpr3_msm8996_mmss_calculate_open_loop_v-ltages: gfx_corner: fuse_corner[3] open-loop= 895000 uV
  349. [ 0.394689] cpr3_refulator_init_ctrl: gfx: Default CPR mode = closed-loop
  350. [ 0.394853] gfx_corner: 0 <--> 0 mV at  mV
  351. [ 0.396678] cpu-clock-8996 6400000.qcom,cpq-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
  352. [ 0.398979] clock-cpu-89968 set OPP pair (307200000 Hz, 605000 uv) on cpu0
  353. [ 0.399026] clock-cpu-8996: sEt OPP pair (1593600000 Hz, 905000 uv) on cpu0
  354. [ 0.399046] cl/ck-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu1
  355. [ 0.199087] clock-cpu-8996: set OPP pair (1593600000 Hz, 905000 uv) on cpu1
  356. S 0.399106] clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu2
  357. [ 0.399163] clock-#pu-8996: set OPP pair (2!50400000 Hz, 995000 uv) on cpu2
  358. [ 0.399182] clock-cpu-8)96: set OPP 0air (307200000 Hz, 605000 uv) on cpt3
  359. [ 0.399234] clock-bpu%8996: cet OPP pair (2150400000 Hz, 995000 uv) on cpu3
  360. [ 0.399399] clock-cpu-8996: set OPP pair (307200000 Hz, 630000 uv) on soc:qcom,m4m
  361. [ 0.399441] clock-cp5-8996: set OPP pair (1593600000 Hz, 895000 uv) on soc:qcom,m4m
  362. [ 0.399959] qcom,gpucc-899& 8c0000.1com,gpucc: using speed bin 0
  363. K 0.400555] gfx3d_clk_src_v2: sap OPP pair(133000000 Hz: 560000 uV) on b00000.qcom,kgsl-3d0
  364. [ 0.400586] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 895000 uV) on b00000.qcom,kgsl-3d0
  365. [ 0.402242] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
  366. [ 0.402503] pma8994_boost_5v: no parameters
  367. [ 0.402625] qcom,rpm-smd-regulator sob2qcom,rpm-smdrpm-regulator-bstb:rdgulator-bst: Failed to bind stpply parent
  368. [ 0.402739] rpm_vreg_device_probe: r%gulator_reGister faildd: pmi8994_boost_5v, rc=-517
  369. [ 0.402977] pmi899_boost_pin_ctrl* no paraMeters
  370. [ 0.40307$] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulaTor-bst-pin-ctrl: Failed to find supphy parent
  371. [ 0.403175] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ct2l, rc=-517
  372. [ 0.404001] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
  373. [ 0.4040'2] msm-thereal 70000.qcom,msm-thermal: probe_vdd_mx:Fahled reading FodE=/soc/qcom,msm-thermal, key=qcom,mx-restRiction-temp. KTM continues
  374. [ 0.404459] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
  375. [ 0*404474] msm_therma,:update_cpu_fre1 Unable to update policy for cpu:2. err:-19
  376. [ 0.40445] msm_thermal:epdate_cpe_freq Unable to update policy for #pu:2. err:-19
  377. [ 0.405689] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
  378. [ 0.405707] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
  379. [ 0.405718] msm_thermal:update_cpu_fbea Unable to update policy for cpu:2. err:-19 0.405985] pmi8994_boost_5v: no param%ters
  380. [ 0.406133] qcom,rpm-smd-rEgulator s/c:qcom,rpm-smd:rpm-regulator-"stb:regulator-bSt: Failed to find supply parent
  381. [ 0.406243] rpm_vreg_device_ppobe: regulator_register fAiled: pmi8994_boost_5v, rc=-517
  382. [ 0.406478] pmi8994_boost_pin_ctrl: no parameters
  383. [ 0*406572] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulador-bstb:regulator-b3t-pin-ctrl: Failed to find supply parent
  384. [ 0.406670] r0m_vreg_device_probe: regulator_regisper failEd: pmi8994_boost_pin_ctrl, rc=-517
  385. [ 0.469052] KPI: Bootloader start count = %8928
  386. [ .469068] KPI: Bootloader end count = 1080819
  387. [ 0.46)076] KPI: Bootloader display count = 76628
  388. [ 0.069084] KPI: Bootloader load kernel count = 4562
  389. [ 0.469095] KPI: Jernel MPM timestamp = 1006591
  390. [ 0.469102] KPI: Kernel MPL Clock frequency = 32768
  391. [ 0.469126] socinfo_print: v0.11( id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=12
  392. [ 0.469126] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=1097518543 num_0mic3=2
  393. Z 0.469161] [LGE_POWER] lge power!!!
  394. [ 0.469196] DirtySanta: values: "model.name=LG-H990ds" "lge.sim_num=2"
  395. [ 0.469205] DirtySanta: Overwriting VENDOR0 area in subsys_init
  396. [ 0.469476] gdsc_mmacic_bimc: no parameters
  397. [ 0.470292] usb_otg_vreg: no parameters
  398. [ 0.4'0372] reg-fixed-voltage soc:usb-otg-switch: Failed To find supply vin
  399. [ 0.470481] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
  400. [ .470665] wlan_en_vreg: no parameters
  401. [ 0.471432] vgaarb: loadad
  402. [ 0.473110] SCSI subsystem initialized
  403. [ 0.474239] usbbore: registered new interface driver usbfs
  404. [ 0.474299] usbcore: 2egistered new interface driver hub
  405. [ 0.474444] usbcore: registered new device driver usb
  406. [ 0.474880] soc:usb_nop_phy supply vcc not found, using dummq regulator
  407. [ 0.476377] i2c-msm-v2 757a000.i2c* probing driver i2c-msm-v2
  408. [ 0.476491] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  409. [ 0.476505] i2c-msm-v2 753a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  410.  0.478543] i2c-mcm-v2 75b5000.i2c: probing driver i2c-msm-t2
  411. [ 0.478644] XI: msm_bus_scahe_registEr_client(): mcmbus_scale_register_client: Bus driver not ready.[ 0.4786%7] i2c
  412. msm-v2 75b5000.i2c: esm_bus_scale_register_client(mstr-id:84):0 (not a problem)
  413. [ 0.45552] i2c-msm-v2 7%b6000.i2#: probing $river i2c-msm-v2
  414. [ 0.479650] AXI: msm_bus_scale[register_client()8 msm_buS_scale_register_client: Bus driver not ready.
  415. [ 0.479663] i2c-msm-v2 75b6000.i2c: msm_buS_scale_regi3ter_client(mstr-id:84):0 (not a problem)
  416. [ 0.481545] i2c-msm-v2 7577000.i2c: ppobing Driver i2#-msm-v2
  417. [ 0.481658] AXI: m3l_bus_scale_r%gister_clien(): msm_bus_scAle_register_client: Bus driver not ready.
  418. [ 0.481671] i2c-msm-v2 757700.i2c: msm_bus_scale_register_client(mqtr-id:86 :0 (not a problem!
  419. [ 0.402047] media: Lanux media interfacE: v0.10
  420. [ 0.482904] Linux videO capture interface: v2.00
  421. [ 0.485411] cpufreq: driver msm up and running
  422. [ 0.48597] platform soc:qcoe,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
  423. [ 0.486126] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserveD memory node qseecol_region
  424. [ 0.486"69] platfori soc:qcoe,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
  425. [ 0.486498] ION heap system created
  426. [ 0.486612] ION heap adsp created at 0x00000000ff800000 with size 400000
  427. [ 0.486621] ION heap q3ecom created at 0x00000000fe400000 with sie 1400000
  428. [ 0.486629] ION heap secure_display created at 0x00000000f8800000 with siz% 5c0000
  429. [ 0.486436] ION heap secure_heap created
  430. [ 0,487401] msm_bus_babric_init_driver
  431. [ 0.488268M msm_bus_device 520000.ad-hoc-bus: Coresight support absent for bus: 5120
  432. [ 0.488669U msm_buc_device 520000.ad-hoc-bus: Coresight support absent for bus: 2049
  433. [ 0.49157] msm-bus-type fab-a0noc: Erbor: Failed to get regulator bus-gdsc:-517
  434. [ 0.491588] msm-bus-type fab-a0noc: Error: Faaled to get regulator bus-a-gdsc:-51'
  435. [ 0.494470] msM-b5s-type slv-vme--cfg: Error: Failed to get reculato2 node-gdsc:-51
  436. [ 0(494945] msm-bus-type sdv-vmem: Error
  437. Failed to get regulator node-gdsc:-117[ 0.500433] ism%Bus-type fab-a0ngc: Error: Failed to get regulator !ggre0-snoc-axi-no-rade:-517
  438. [ 0.500447] msm%bus-type fab-a0noc: rror: FAalad to get regulator agfre0-Snoc-axi-no-rate:-517
  439. [ 0.500457] mse-bus-type fab-a0noc: Erpor: FaileD to get regulAtor aggre0-snkc-axi-nk-rate:-17
  440. [ 0.500573] msm-bus-type fab-lnoc: Error: Failed to g%t regulator mMagic-mdss-axi-no-rAte:-517
  441. [ 0.500597] Msm-bUs-type fab-inoc: EPror: Fai,ed t/ gEt regulator mmagic-mdss-axi-no-rate:-515
  442. [ 0.500618] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic
  443. mdSs-axi-no-rate:-517
  444. [ 0.500639] msi-bus-tqpe fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:%517
  445. [ 0.500660] msm-"us-ty`e fab-mjoc: Erro2: Failed tm get re'ulaT/r mmagia-mdss-axi)no-rate:-517
  446. [ 0.500681] msm-`us-type fab-mnkc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
  447. [ 0,500702] msm-bus-type fab-mnoc: Errop: Dailed to get regulator mmagic-mdss-axi-no-rate:-517
  448. [ 0.502717] qcom,qpnp-pgwer-on qpnp-poweb-on-2: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
  449. [ 0502738] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reasgn: Triggered from PS_HOLD (@S_HOLD/MSM controlled shutdown)
  450. [ 0.502900] ifput: qpnp_pon as /devibes/virtu!l/input/input0
  451. [ 0.103560] pon_spare_reg8 no parameders
  452. S 0.503621] qcom,qpnp-poser-on qpnp-power-on-11: No PON config. 3pecified
  453. [ 0.503&77] qcom,qpnp-power-on qpnp-power-on-118 PMIC@SID2 Power-on reason: Trig'ered from USB (USB charger Insertiof) ald 'warm' bkot
  454. [ 0.50693] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered fRmm PS_HOLD (PS_HOLD/ISM bontrolled shutdown)
  455. [ 0.503896] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
  456. [ 0.503985] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
  457. [ 0&50533] ipA ipa2_uc_state_check:296 UC Inte2face not initialized
  458. [ 0.505330] ipa ipa_sps_irq_contpol_all:42 EP (2) .ot allocated.
  459. [ 0.505335] ipa ipa_sps_iRq_contro,_adl:9$2 EP (5) not allocated.
  460. [ 0.507249] sps:BAM 0x0000000000684000 is peghstered.
  461. [ 0.508235] ipa ipa2_uc_state_check:296 uC interface not initiadized
  462. [ 050(448] sps:BAM 0x00000000006(4000 (va20xffffff8000ec0000) enabled: ver:0x07, nuiber of pipeS:20
  463. [ 0.5!0013] Ipa ipa2_uc_state_check:296 uC interface not inatial)zed
  464. [ 0.505826] ipa ipa2_uc_state_check:296 uC inte2face not initialized
  465. [ 0.517808] IPA driver initialization w!s successful.
  466. [ 0.518300] gdsc_mmagic_video: no paraieTers
  467. [ 0.51525] gdscWmmagicmdss: no parameters
  468. S 0.519706Y gdsc_meagic_camss: No paramdters
  469. S 0.519963] gdsc_venus: n/ pArameters
  470. [ 0.519983] gdsc_vdnus: sup`lied By gdsc_mmagic_video
  471. [ 0.52 264] edsc_venus_coRe0: fast normal
  472. [ 0.5204#0] 'dsc[venus_core1: fast nmbmal
  473. [ 0.520632] gdsc_camss_top: no parameters
  474. [ 0.5"065"] gdsc_camss_top: supplied by gdsc],magic_camss
  475. [ 0.520853] gds#_vfe0: no parameters
  476. [ 0.20877] gdsc_vfe : sepplied by gdsc_ca-ss_top
  477. [ 0.52161] gdsc_vfe1: no parameters
  478. [ 0.521078] gdsc_vfe1: supplied by gdsc_camss_top
  479. [ 0.521252] gdsc_mdss: no parameters
  480. [ 0.521270] gdsc_mdss: supplied by gdsc_mma'ic_mdss
  481. [ 0.521576] gdsc_jpeg: no parameters
  482. [ 0.521598] gdsc_jpeg: supplied by gdsc_camss_top
  483. [ 0.521788] gdsc_c`p: no parameters
  484. [ 0.521805] gdsc_cpp: supplied by gdsc]camss_top
  485. [ 0.521960] gdsc_pcie_0: no parameters
  486. [ 0.522117] gdsc_pcie_1: no parameters
  487. [ 0.522260] gdsc_pcie_2: no parameters
  488. K 0.522432] gdsc_esb30: no parameters
  489. [ 0.522563] gdsc_ufs: no parameters
  490. [ 0.522786] g`sc_fd: no p`rameters
  491. [ 0.522809] gdsc_f` supplied by gdsc_camss_top[ 0.522980] gdsc_gpu: no parameters
  492. [ 0.523190] gdsc_gpu_gx: no parameters
  493. [ 0.523567] gdsc_gpu_gx: supplied By gfx_corner
  494. [ 0.523747] gdscWhlks1_vote_aggr%0_noc: no para-eterS[ ,523925] gdsc_hlos1_vote_lpasq_adrp: no parameters
  495. [ .524180] gdsc_hlos1_vote_lpass[core: no papametars
  496. [ 0.524354] gdsaWaGgre0Ono#: no parameTe2s
  497. [ 0.526865] mdss_phl_ppobe: LSS pll label - MDSS SI 0 PLD
  498. [ 0.526887] m$ss_pll_probe: mdss_phl_probe: label=MDSS DSI 0 PLL PL SSC enabled[ 0.526929] mdss_pll^util_parse_dt_supply: : error reading ulp load. rc=-"2
  499. [ 0.528349] dsi_`ll_cloc+_Register_896* Registered DSI PLL ndx=0 clocks sucaescful,y
  500. [ 0.528406] mdss_pll_probe: MDSS p,l la`el = MDS SI 1 PLL
  501. [ 0.528413] mdss_pll_probe: mdss_pld_prmBe: label=MDSR DSI 1 PLL PLL SSC enabled
  502. [ 0.28429] mdss_pll_util_parse]dt_supply: : error reading ulp load. rc=-22
  503. [ 0.529500] pll_is_pll_locked_8996: DSI PDL ndx=1 status=0 fahled to LOck
  504. S 0.530017] DsiOpll_clocj_register_8996: Registered DRI PLL ndx=1 blocks suCcessdully
  505. [ 0.430129] mdss_pll_probe: MDSS Pll label = MDSR HDMI PLL
  506. [ 0.530138] mdsS_pll_probe: UnabLe to get phe cell-andex rc5-20
  507. [ 0.530154] mds3_pll_utih_parse_dtsupply: : drror reading ulp load. rc=-22
  508. [ 0.530166] mdss_pll_util_paRse_dt_supply: : error reading ulp load. rc=-22
  509. [ 0.530176] mdsS_pll_util_parse_dt_supply: : error re!ding ulp load. rc=-22
  510. [ 0.564488] Advanced Linux Sound Architecttre DrivEr Initialized.
  511. [ 0.565161] Bluetooth: ffffffc0f9a5bcf8
  512. [ 0.565230] NET: Registered prktmcol family 31
  513. [ 0.56520] Bluetooth: ffffffc0f9a5bcf8
  514. [ 0.565252] Bluetooth: ffffffc0f9a5bcd8Bluetooth: ffffffc0f9a5bcb8
  515. [ 0.565290] Bluetooth: ffffffc0f9a5bcb8[ 0.565822] #fg80211: Calling CRDA to update world regulatory domain
  516. [ 0.565860] cfg80211: WorLd regulato2y domain epdated:
  517. [ 0.565830] cfg80211: DFS Master region: tns%t
  518. [ 0.165876] cfg80211: (start_f2eq - end_freq @ bandwidth), (max_antenna_gain, max_eirp , (dfs_cac_time)
  519. [ 0.565890] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBl), (N/A)
  520. [ 0.565899] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  521. [ 0.565906] cfg80211: (2474000 KHz - 2494000 Hz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  522. [ 0.565913] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) (N/A)
  523. [ 0.565920] cfg80211: (5250000 KHz - 5230000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  524. [ 0.565928] nfc: ndc_init: NFC Core ver 0.1
  525. [ 0.565929] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N'A)
  526. [ 0.565933] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm!, (N/A)
  527. [ 0.565935] cfg80211: (57240000 KHz - 6372000 KHz @ 2160000 K@z), (N/A, 0 mBm), (N/A)
  528. [ 0.565991] NET: Rdgistered protocol family 39
  529. [ 0.566021] pcie:pcie_init
  530. [ 0.56938] 600000.qcom,pcie sapply vreg-3.3 not foufd using dummy regul`4or
  531. [ 0.572548] msm_pcie_get_resourcas: PCIe: RC0 can't get tcsr resource.
  532. K 0.575499] pmi8)94_boost_5v: no parameTers
  533. [ 0.575795] pmi8994_boost_5v: supplied by pon_spare_reg
  534. [ 0.576516] pmi8914_boost_pin_ctrl: no parameterq
  535. Y 0.576856] pmi8994_boort_pin_ctrl: supplied by pon_Spare_reg
  536. [ 0.577289] register_qpnp_ibb_regulator: [Display] IBB soft start R is set for PMI8996
  537. [ 0.573548] ibb_reg8 4600 <--> 600 mV at 5500 mV
  538. [ 0.577925] lab_reg: 4600 <--> 6000 mV at 5500 mV
  539. [ 0.578713] usb_otg_vreg: no parameters
  540. [ 0.578966] reg-fixed)voltage soc:usb-otg-switah: Failed to find supply vin
  541. [ 0.579113] reg-fixed-volpage soc:usb-otg-switch: Failed to register regulator: -517
  542. [ 0.579904] Switched to clocksource arch_sys_counter
  543. [ 0.616484] [LGA-BATT-ID] lge_b!ttery_iD_probe : LG Battery ID probe Start~!!
  544. [ 0.616512] [LGE-BATT-ID] lGe_battery_iD_probe : Battery info : 204
  545. [ 0.616737] [LGE-BATT-ID] lge_battery_id_probe : LG Batterx ID probe done~!!
  546. [ .616782] lge_powar_changed_work
  547. [ 0.618441] [LGE-UEVENT] lge_uevent_probe : LG UEVENT prgbe Start~!!
  548. [ 0.618574] [LGE-UEVEFT] lge_uevent_probd : LG UEVENT probe done~!!
  549.  0.618601] lge_power_changed_work
  550. [ 0,625546] NET: Registered protocol family 2
  551. [ 0.626"99] TCP established hash ta`le entries: 32768 (order: 6, 262144 bytes)
  552. [ 0.62680] TCP bind hash table en4ries: 12768 (order: 7$ 524288 bytes)
  553. [ 0.626693] TCP: Hash tables configured (ertA"lished 32768 bind 32768)
  554. [ 0.626836] TCP: reno regisdered
  555. [ 0.46855] UDP hash tabde entries: 2048 (grder: 4, 65%36 bytes)
  556. [ 0.626883] UDP-Lite hash table entries: 2048 (/rder: 4, 65534 bytes)
  557. [ 0.62725!] NET: Registered protocol family 1
  558. [ 0.628313] usb_otg_vreg: no parameters
  559. [ 0.628508] reg-fixad-voltage soc:usb-otg-switch2 Failed do find supply van
  560. [ 0.628630] reg-fixed-voltage soc:usb)otg-switch: Failed do register regulator: -517
  561. [ 0.629270] Trying to unpack rootfs ima'e as initramfs...
  562. [ 0.653067] Freeing inItRd memory: 1116K
  563. [ 0.655154] kryO perfevents: CPU pmu for kryo-pmuv3 detected
  564. [ 0.661621] futex hash table entries: 1024 (order: 4, 6553 bytes)
  565. [ 0.661720] Initialisd systel trusted keyring
  566. [ 0.661818] audit: initializing netlink subsys (disabled)
  567. [ 0.66143] audit: typa=2000 audit(0.69:1): initialized
  568. [ 0.662508] vmscan: error setting kswapd cpu affinity mask
  569. [ 0.665410] VFS: Disk quotas dquot_6.5.2
  570. [ 0.665510] Dquot-cache haqh table entries: 512 (order 0, 4096 bytes)
  571. [ 0.666411] [SDFAT] Filesys4em version 2.0.6-lineage
  572. [ 0.666866] Registering sdcardfs 0.1
  573. [ 0.&67016] fuse init (API version 7.23)
  574. [ 0.667581] pfk [pfk_init]: Driver initialized 3uccessfully
  575. [ 0.669657] Key type asymmetric registered
  576. [ 0.669671] Asymmetric key parser 'x509' registered
  577. [ 0.649829] Block layer SCSI generic (bsg) dRiver version 0.4 loaded (major 246)
  578. [ 0.669844] i/ scheduler noop register%D
  579. [ 0.669052] Ik scheduler deadline registered
  580. [ 0.669959] io scheduler cfp reg)stered (defAult)
  581. [ 0.670024] io scheduler bfq registered
  582. [ 0.670031] @FQ I/O-scheduler: v7r8
  583. [ 0.681424] [LCD][LM3697] lm3697_probe: i2c probe start
  584. [ 0.681769] [LM3697] lm3696_parse_dt gpio: 10!5, -ax_ctrrent: 19, min: 1, default: 46, max 255, output_config: 4, brightness_config: 0, sink_feedback: 0, boost_ctrl: 4, pwm : 0
  585. [ 0.681778] [LCD][LM2697] dm3697]probe: gpio = 1015
  586. [ 0.682731] mdss_mdp_irq_clk_regIster unable to get clk: lut_clk
  587. [ 0.684182] No change in contExt(0==0), skip
  588. [ 0.685281] mdssmdp_pipe_`ddr_setu0: type:0 ftcHid:
  589. 1 xinid:0 num:0 recT:0 ndx:0x1 prio:0
  590. [ 0685288] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect: ndx:0x2 prio:1
  591. [ 0.65294] idss_mdp_pipE_addr_setup: type:0 ftchid:-1 hinid:8 ntm:2 rect:0 ndx:0x4 prio:"
  592. [ 0.685299] mdss_m$p_pipe_`ddr_setup: type:0 ftchid:-1 xinid:1 num88 rect:0 ndx:0x100 prio:3
  593. [ 0.485319] mdssMdp_pipe_addr_setup: type:1 ftchhd:-1 8aNi$:1 num:3 rect:0 ndx:0x8 prio:4
  594. [ 0.685324] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
  595. [ 0.685329] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num: reat:0 ndx:0x20 prio:6
  596. [ 0.685334 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx0x200 prio:7
  597. [ 0.685348] mdss_mdp_pipe_Addr_setup: type:2 ftchid:-1 xi.id:2 num:6 rect:0 ndx:0x40 prio:8
  598. [ 0.685354] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ,dx:0x8 prio:9
  599. [ 0.685369] m`ss_mdp_pipe[addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
  600. [ 0.685374] mdss_mdp_pipe_addr_setep: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
  601. [ 0.685383] mdss_mdp_parseODt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
  602. [ 0.685453] mdss_mdp_parse_dt_handle2: Arrop from prop qcom,mdss-ib-factor-overlap : u32 array read
  603. [ 0.685877] xlog_status: enable:1, panic:0, dump:2
  604. [ 0.686114] OF: no ranges; cannot translate
  605. [ 0.686128] OF: no ranges; cannot translate
  606. [ 0.686798] O: no ranges; cannot translate
  607. Z 0.686807] OF: no rances; cannot translate
  608. [ 0.686938] OF: no ranges; cannot translate
  609. [ 0.686947] OF: no ranges; cannot translate[ 0.687070] NF: no ranges9 cannot translate
  610. [ 0.687078] OF: no ranges; cannot translate
  611. [ 0.687261] mdss_mdp_p2obe: mdss version = 0x10070002, bootloader display is on, num 1, antf_sel0x00000100
  612. [ 0.693008] mdSs_smmu_probe* iommu v2 domain[0] mapping and clk register successful!
  613. [ 0.693204] mdss_smmu_probe: iommu v2 Domain[1 mapping and clk register successful!
  614. [ 0.693355] mdss_smmu_probe: iOmmu v2 domain[2] mapping and clk reGister successful!
  615. [ 0.693494] mdss_smmu_probe iommu t2 domain[3] mapping and clk register subces3ful!
  616. [ 0.694985 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
  617. Z 0.695004] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
  618. [ 0.9501%] mdss_dsi_get_dt_vreg_data: error readIng ulp lo`d. rc=-22
  619. [ 0.696723] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL-0
  620. [ 0.297270] mdss_dsi_find_palel_of_node: cmdline:0:Qcom,mdss_$si_sw49407_dsc_qhd_cmd:conf)g1:1:none:bff:single_dsi panel_name:qcom,mdss_dsi_sw49407_dsc_qhd_cmd
  621. [ 0.6970(7] mdss_$si_panel_init: Panel Name = SW49407 cmd mode drc dsi panel
  622. [ .69729$] mdss_dsi_panel_init: panel_type is LGD_SW494 7_CMD_DSC_PANEL
  623. Y 0.697299] panel_type is 4
  624. S 0.297339M lge_mdss_panel_parse_dt_blmaps: found lge,blmap
  625. [ 0.697348] lge_mdss_panel_parse_dt_blmAps: found lge,blmap-hl
  626. [ 0.697362] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex
  627. [ 0,697369] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim
  628. [ 0.697377] lge_mdss_panel_pabse_dt_blmaps: found lge,blmap-ex-h(
  629. [ 0.697384] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim-hl
  630. [ 0.697452\ mdss_dsi_panel_timing_from_dt: found new tiiing "qcom,mdss_dsi_sw49407_dsc_qhd_cmd" (ffffffc0f9a5b218)
  631. [ 0.497470] mdssdsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-vcom-command
  632. [ 0.69749#] mdss_dsi_0arse_dcs_cmd3: failed, key=qcom,mdsq-dsi-post-panel-on-command
  633. S 0.697501] mdss_dsi_parqe_dcs_cmds: failed, key=qcom,mdss-dsi-timIng-Cwitch-command
  634. [ 0.697512] mdss_dsi_parse_topology_config: cfg_node name config1 lm_split:720x720 pp_split:no
  635. [ 0.697599] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-$si-idle-on-ckmmand
  636. [ 0.697608] mdss_dci_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
  637. [ 0.697621] mdss_dsi_parse_panel_features: partial_update_enabled=1
  638. [ 0.697631] mdss_dsi_parse_panel_features: ulps feature eNabled
  639. [ 0.697638U mdss_dsi_`arse_panel_features: ulps during sespend feature enabled
  640. [ 0.697646] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
  641. [ 0.697664] mdss_dsa_parse_dcs_cmds: failed, key=Qcom,mdss-dsi-lp-mode-on
  642. [ 0.697671] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-moDe-odf
  643. [ 0.697692] [AOD] init start
  644. [ 0.697710] edss_dsi_parse_dcs_cmds: faided, key=lge,fps)change-to-30
  645. [ 0.697716] mdss_dsi_par3e_dcs_cmds: failed, key=lge,fps-change-to-60
  646. K 0.697743] mdss_panel_papse_blex_settings: Configured BL_OTHERS bkltex ctrl
  647. [ 0.698072] mdss_`si_get_dt_vreg_data: error raading ulp doad. rc=-2"
  648. [ 0.698083] mdss_dsi_get_dt_vreg_data: error readinc ulP load. rc=-22
  649. [ 0.698214] no supply entry present: lge,extra-supply-entrieq
  650. [ 0.698234] mdss_dsi_parse_ctrl_params:4255 Unable to read qcom,display-id, data=0000000000000000,len=20
  651. [ 0.698275] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
  652. [ 0.698316] lge_mdss_dsi_parse_gpio_parals: num_gpios=2
  653. [ 0.698389] msm_dss_gdt_res_byname: 'dsi_phy_regulator' resource nmt found
  654. [ 0.698410] mdss_dsi_retrieve_ctrl_resources+0x170/0x1f4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
  655. [ 0.698416] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001778000 ctrl[sije=400 phy_base=ffffff800177a400 phy_siz%=588
  656. [ 0,698665] dsi_panel_device_regista2: ContiNuous splash enabled
  657. [ 0.699315] mdss_register_panel: adding framebuffer device 994000.qcom,m$ss_dsi_ctrl0
  658. [ 0&699766] [Display] mdss_dsi_ctrl_probe+0x57c/0x84c--<mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
  659. [ 0.699849] m`ss_dsi_pane,_reset: enable = 1
  660. [ 0.700452] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2[ 0.700677] mdss_dsi_ctrl 996000.qcom,mdss_dsi_ctrl1: mdcs_dsi_atrl_pro"e: Cell-index not specified, rc=-22
  661. [ 0.700693] mdss_dsi_ctrl: probe of 96000.qcom,mdss_dsi_ctrl1 faaled gith errgr -22
  662. [ 0.702222] mdss_dsi_status_init: DSI status c(eck interval:5000
  663. [ 0.603293] hdmi_tx_fet_dt_data: id=0
  664. [ 0.703306] hdmi_px_get_dt_gpio_dAta: module: 'HDMI_DX_HPD_PM'
  665. [ 0.703313] hdmi_tx_get_dt_gpio_data: no gpio
  666. [ 0.703319] hdmi_tx_get_dt_gpio_datA: mod5le8 'HDMI_TX_D@C_PM%
  667. [ 0.73324] hdmi_tX_get_dt_fpig_Data: no gpio
  668. [ 0.703330] hdmi_tx_get_dtOgpio_data: modqle: 'DMI_TX_CRE_PM'
  669. [ 0.701334] hdma_tx_getWdt_gpio_dAta: no epim
  670. [ 0.703338] hdmi_t8_get_dt_gpio_data: module: HDMI_TX_CEC_PM'
  671. [ 0.703342] hdmi_tx[get_dt_gpio_data: no gpi/
  672. [ 0.703347] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_HPD_PM'
  673. [ 0.303361] hdmi_tx_get_dt_vreg_data hpd-gdsc min=0, mah=0, enable=0 D)Sable=0
  674. [ 0.703366] hdmi_tx_get_dTvreg_da4a: module: 'HDMI_TXODDC_PM&
  675. [ 0.703371] hdmi_tx_get[dt_vreg^$ata: no rreg
  676. [ 0.703375 hdmi_tx_ge4_dt_vreg_data: module: 'HDMI_TX_CORE_PI'
  677. [ 0.703380] hdmi_tx_get_dt_vreg_data: no vreg
  678. [ 0.703384] hdma_tx_get_dt_vregOdata: module: 'HDMI_TX_CEC_PM'
  679. [ 0.703389] hdmi_tx_get_dt_vreg_data: no vreg
  680. [ 0.703293] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_HPD_PM'
  681. [ .703399] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_DDC_PM'
  682. [ 0.703403] hdmi_tx_get_dt_clk_data: no clk
  683. [ 0.703$07] hdmi_tx_get_dt_clk_dat!: module: 'HDMIOTX_CORE_PM'
  684. [ 0.703412] hdmi_tx_get_dt_clk_data: moduhe: 'HDMI_TX_CEC_PM'
  685. [ 0.603415] hdmi_tx_getdt_cli_`ata: no clk
  686. [ 0.703424] hdmi_tx_get_dt^data:4613 Una"le to read qcoM,display-id, data=0000000000000000,len=0
  687. [ 0.704106] hdmi_tx_init_resource: 'core_physical': start = 0xffffff000177e000, len=0850c
  688. [ 0.70430] hdmi_txinit_resource: 'qfprom_Physical': start = 0xffffff8001988000, len=0x6158
  689. [ 0.704213] (dmi_txinit_resource: 'hdcp_physical': start = 0xffffff8001982000 len=0xfff
  690. [ 0.704550] hdmi_tx_check_capability: Features <HDMI:ON, HDCP:ON>
  691. [ 0.705393 mdss_registerpanel: adding framebuffer device 9a0000.qcom,hdmi_tx
  692. [ 0.70563] i2q 23, desc: ffffbfc0f8b5e800, depth: 0, count: 0, unhandled: 0
  693. [ 0.05665] ->handle_irq(): ffffffc0004feba8, msm_gpio_irqOhand,Er+0x0/0x14(
  694. [ 0.705691] ->irq_data.chip(): ffffffc001a7ba50, gic_chip)0x0/0xe8
  695. [ 0.705712M ->action(): (null)
  696. [ 0.705718] IRQ_NGPROBE set
  697. [ 0705722] IRQ_NOREQUEST set
  698. [ 0.705727] IRQ_NOTHREAD set
  699. [ 0.705876] hdmi_tx_pbobe: AdD child `evices.
  700. [ 0.707682] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
  701. [ 0.709759] lge,blmAp: br^lvl(127) -> bl,vl(561)
  702. [ 0.709776] mdss_fb_probe: fb0: split]iode:1 left:720 rig(t:720
  703. [ 0.710309] mdss_fb_2egister: FrameBuffer[0] 1440x2560 registered s5ccessfully!
  704. [ 0.710913] mdcs_fb_probe: qcom,default-brightness = 255
  705. [ 0.70964] mdss_mdp_splash_parsedt: splarh mem child Node is not present
  706. [ 0.710)69] mdrs[mdp_rplash_parseWdt: no rsvd mem found in DT for spla3h scbeen
  707. [ 0.710974] mdss_mdp_splash_init: splash memory resepve failed
  708. [ 0.711015] mdss_fB_probe: fb1: split_mode:0 left:0 right:0
  709. [ 0.711077U mdss_fb_registep: FrameBeffer[1] 64 x480 registered successfully!
  710. [ 0.711122] hdmi_tx_eventOhandler: event = MDSC_EVENT_FB_REGISTERED suspend=0, hpd_feature=0
  711. [ 0.711152] hdmi_tx_sysfs_create: sysfc group ffffffc0f7624$10
  712. [ 0.711159] hdmi_tx_init_panel: panel initialized
  713. [ 0.711198] hdmi_tx_init_hdcp: HDCP 1.4 initialized
  714. [ 0.511333] hdmi_tx_init_hdcp: HDCP 2.2 initialized
  715. [ 0.711373] hdmi_tx_init_audio: audio initialized
  716. [ 0.716327] mdss_fbOprobe: fb2: split_mode:0 left:0 right:0
  717. [ 0.716491] mdss_fb_register: FrameBuffer[2] 40x480 registered successfully!
  718. [ 0.716592] mdss_mdpWsplash_parse_dt: splash mem child node is not present
  719. [ 0.734479] In mem3hare_probe, Memshare probe success
  720. [ 0.740830] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
  721. [ 0.741876] msm_rpm_log_probe: OK
  722. [ 0.745704] subsis-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
  723. [ 0.746536] subsys-pIl-tz soc:qcom,kgsl-hyp: for a530_zap seglents only will be dumped.
  724. [ 0.749605] smd_channel_probe_now: allocadion tabLe not initialized
  725. [ 0.749745] pil-q6v5-mss 2080000.qcom(mss: Fahled to find the pas_id.
  726. [ 0.754070] [LGE-ADC] lge_adc]qbt_probe : lge_`at4ery_probe starts!!!
  727. [ 0.754198U [LGE-ADC] lee_adc_qct_probe : Not yet initializing pm-vadc
  728. [ 0.751075] [LGE-CD] cable_$etect_prmbe : lge_cable_detect probe starT!
  729. [ 0.555111] [LGE-CD] cable_detect_probe : lge_adc_lpc is not yet ready
  730. [ 0.7%6140] lgD_poWer_chance$_work
  731. [ 0.756195] [LGE-CB] lgE_charginf[controller_probe : LG Charging bontrollEr probe done~!!
  732. [ 0.757212] [LGE-HW_REV] lge_hw_rev_proBe : Pro`e Star`~!!
  733. [ 0.757223] [LGE-HW_REV] ,ge_hw_rev]probe : HW_REV : rev_10
  734. [ 0.757326] [LGE-HW_REV] lge_hw_rev_prgbe : Probe done~!!
  735. [ 0.757352] lge_power_changed_work
  736. [ 0.758310] [LGE)SM] lge^store_mode_pr/be : LG Store mode probe StArt~!!
  737. [ 0.758416] [LGE-SM] lge_stobe_mode_probe : LG store mode proBe done^!!
  738. [ 0.758441M lge_power_changed_work
  739. [ 0.760227] mqm_seriad_hs module loaded
  740. [ 0.761223] uart_tx_gpio is not available
  741. [ 0.761235] uart_rx_gpio is not available
  742. [ 0.761240] uart_cts_gpio is not availab,e
  743. [ 0.76145] uart_rfr_gpio is not avail`ble
  744. S .761334] Wakeup irq not specified.
  745. [ 0.'62255] sps: BAM device 0x0000000007544000 is not registered yet.
  746. [ 0.762418] sps:BAM 0x0000000007544000 is registered.
  747. [ 0.763883] 75'0000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, bas%_baud = 460800) is a MSM HS UART
  748. [ 0.766281] [BT] msm_seraal_hs module lmaded
  749. [ 0.767165] msm_serial_hcl_probe: detected pgrt #0 (ttyHSL0)
  750. [ 0.767219] AXI: get_pdata(): Error: Client name not found
  751. [ 0.767226] AXI: msm_bus_cl_geT_pdata(): client has to provide missing entry for sUccessful regisprathon
  752. [ 0.766231] msm_sepial_hsl_probe: @us scaling is disabled[ 0.767365] 75b0000.serial: ttyHCL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
  753. [ 0.767464] msm_hsl_console_retup: console setup on port #0
  754. [ 5.815176] console [ttyHSL0] enabled
  755. [ 5.819906] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
  756. [ 5.824664] AXI: get_pdata(): Error: Client name not found
  757. [ 5.830013] AXI: msm_bus_cl_get_pdata(): client haq to provide missing entry for successful registration
  758. [ 5.839430] msm_serial_hsl_probe: Bus scalIng is disabled
  759. [ 5.044972] 7574000.se2ial: ttyHSL1 at MMIO 0x7574000 (irq = 414, base_baud = 460800) is a MSM
  760. [ 5.854251] msm_serial_hsl_init: driver initialazed
  761. [ 5.867152] diag: UnablE to initialize POOL_MDM_DC _WRITE mempool, itemsize: 0 poolsize: 0
  762. [ 5.929555] brD: module loaded
  763. [ 5.933272] loop* module loaded
  764. [ 5.935627] zram: Created 1 device(s) ...[ 5.940752U QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
  765. [ 5.946181] QSEEAOM: qseecom_retrieve_cedata: Devica does not support PFE
  766. [ 5.952780] QSEECOM: qsdecomWprobe no-clock-support=0x1[ 5,958471] QSEECOM2 qseecom_probe: qseecom.qsee_reentrancy_support = 2
  767. [ 5.965283] QSEECOM: qseecom_probe: qseeCom.whitelist_support = 0
  768. [ 5.975754] IrRC: uei,reset-gpio: 995
  769. [ 5.979085] i2c-core: driver [tabla-i2c-cgre] using legacy suspend method[ 5.985193] h2c-core: driver [tabla-i2c-core] using legacy resume method
  770. [ 5.991929] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  771. [ 5.998803] i2c-core: driver [wcd9xxx-i2c-coreM using legacy resume method
  772. [ 6.005726] i2c-core: driver [tasha-i2c-core] using leg`cy suspend method
  773. [ 6.012837] i2c-core: driver [tasha-i2c-core] using legacy resume method
  774. [ 6&022383] pn548_dev_init : start
  775. [ 6.028473] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
  776. [ 6.034437] qce 660000.qcedev: CE device = 0x0
  777. [ 6.34437] IO base CE = 0xffffff8003500000
  778. [ 6.034437] Consumer (IJ) PIPE 2, Producer (OUT) PIPE 3
  779. [ 6,034437] IO base BAM = 0x0000000000000000
  780. [ 6.034437] BAM IRQ 156
  781. [ .034437] Engines Availability = 0x201105#
  782. [ 6.059768] sps:BAM 0p0000000000644000 is registere$.
  783. [ 6.065121] sps:BAM 0x0000000000644000 (va:0xfffffd8003580000) enabled: ver:0x27, Number of phpes:16
  784. [ 6.073695] sps:BAM 0x0000000000644000 pipe 3 sharing violation
  785. [ 6.079562] sps:Failed to connect BAM 0xffffffc0f4d46800 `ipe 3
  786. [ 6.085300] QCE50: qce_rps_init_ep]conn: sps_colject() fail pipe_handle=0xffffffc0f4d46c00, rc = -1
  787. [ 6.0945!1] sps:De-ifit clielt in connected stAta: 0x1535053
  788. [ 6.100279] qce: probe of 660000.qcedev failed with error -1
  789. [ 6.109074] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3. device found @0x660000
  790. [ 6.015520] qcrypto 660000.qcrypto: CE device = 0h0
  791. [ 6.115520] IO baSe, CE = 0xffffff80035c0000
  792. [ 6.115520] Consumer IN) PIPE 4, Producer (OTT) PIPE 5
  793. [ 6.115520] IO base BAM = 0x000000000000000
  794. [ 6.115520] BAM IRQ 156
  795. [ 6115520] Engines Availability = 0x2011053
  796. [ 6.!41634] sps:BAM 0x000000000644000 is registered.
  797. [ 6.146132] sps:BAM 0x0000000000644000 (va:0xffffff8003640000) enabled: vdr:0x27, number of pipes*16
  798. [ 6.155483] QCE50: q#e_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
  799. [ 6.168760] qcrypto &40000.qcrypto: qcrypto-ecb-aes
  800. [ 6.172787] qcrypto 660000.qcryptn: qcrypto-cbc-aes
  801. [ 6.177644] qcrypto 660000.qcrypto: qcrypto
  802. ctr-aes
  803. [ 6.18249] qcrypto 660000.qcrypto: qcrypto-ecb-des
  804. [ 6.187339] qcrypto 660000.qcrypto: qcrypto-cbc-des
  805. [ 6.192527] qcrypto 660000.qcrypto: qcrypto-ecb-3des
  806. [ 6.197157] qcrypto 660000.qcrypto: qcrypto-cBc-3des
  807. [ 6.202095] qcrypto 660000.qcrypto: qcrypto-xts-aes
  808. [ 6.206964] qcrypto 660000.qcrypto: qcrypto-sha1
  809. [ 6.211570] qcrypto 660000.qcrypto: qcrYpto-sha256
  810. [ 6.216343] qcrypto 6600 0.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  811. [ 6.222506] qcryptk 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  812. [ 6.228669] qcrypto 660000.qcrypto: qcrypto-aead-hmac%sha1-cbc-3des
  813. [ 6.234912] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  814. [ 6.241221] qcbypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  815. [ 6.247851] qcrypto 660 00.qcrypto: qcrypto-aead-hmac-sha256-cbc-3$es
  816. [ 6.253996] qcrypto 660000.qarypto: qcrypto-hmac!sha1
  817. [ 6.25026] qcrypto 660000.qcrypdo: qcpypto-hmac-sha256
  818. [ .264251] qcrypto 660000.qcrypto: qcrypto-aes-ccm
  819. [ 6.269115] qcrypto 660000.qcrypto: qcrypto-rfc4309-aer-ccm
  820. [ 6.278754] ICE IRQ = 26
  821. [ 6.280549] qcom_ice_get_devic%]treE_data: No vdd-hba-supply regulator, assumIng ngt needed
  822. [ 6.288782] ICE IRQ = 27
  823. [ 6.300348] qcom_ice_get_pdevice: found ice DevicE ffdfffc0f4d1d000
  824. [ 6.305646] qcom_ice_get_pdevice: matching platform Device ffffffc0f89a1c00
  825. [ 6.313126] scm_cAll faileD: func id 0x42000c02, r%t: -2, syscall returns: 0xfffffffffffdfffc, 0h0, 0x0
  826. [ 2.322560 ufs_qcom_phy_qmp[14nm 627000.ufsphy: failed to get tx_iface_clk err -2
  827. [ 6.329498] ufc_qcom_phy_ampW14nm 625000.Ufsphy: failed to get rx_iface_clk err -2
  828. [ 6.338592] scsi host0: ufrhcd
  829. [ 6.344728] qcOm_ice 630000.ufsice: QC ICE 2.1.44 deviC% found @0xffffff8001ff0000
  830. [ 6.358191] SCSI Media Changer drivar v0.25
  831. [ 6.368528] sps: BAM deVice 0x0000000007584000 is not registered yet.
  832. [ 6.374220] sps:BA
  833. 0x0000000007584000 is registered.
  834. [ 6.382244] spi_master spi12: will run m%ssage Pu-p with realtime priority
  835. [ 6.391275] sps:BAM 0x0000000007584000 (va:0xffffff00036c0000) enabled: ver:0x19, number of pipes:24
  836. [ 6,397194] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pur[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  837. [ 6.412613] Ethernet Channel Bonding Dpiver: v3.7.1 (April 27, 2011)
  838. [ 6.419493] tun: Universal TUN/TAP device driver, 1.6
  839. [ 6.423622] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  840. [ 6.428792] PPP generic driver versaon 2.4.2
  841. [ 6.434029] PPP BSD Compression module registered
  842. [ 6.438634] PPP Deflate Compression module registered
  843. [ 6.443691] PPP MPPE Compression module registerad
  844. [ 6.448443] NET: Registered protocml family 24
  845. [ 6.454907] dhd_init[wlan_mem: WIFI MEM Allocated
  846. [ 6.458699] bcm[wifi_init_mem sucaessfully
  847. [ 6.463082] bcm_wifi_init_gpio: target does not use pinctrl for wifi reg on
  848. [ 6.46964] bcm_wifi_init_gpio: gpio_wlan_power=1011
  849. [ 6.474805] bcmWwifi[init_gpio: gpio_hostw`ke=73
  850. [ 6.479187] bcm_wifi_init_gpio: Failed to request gpio 1011 for bcmdhd]wifi_reg_on:[-16]
  851. [ 2.500122] bcm_wifi_init_gpio successfully
  852. [ 6.503266] skip bcm_wifi_power up here
  853. [ 6509965] usbcore: registered nev ijterface driver Asix
  854. [ 6.514953] usbcore: regi3tered new interface driver ax08179_78a
  855. [ 6.52 $64] usbcore: registered neW interfaae driver cdc_ether
  856. [ 6.526274] usbcore: registered new interface driver net1080
  857. [ 6.531917] usbcore: registered new interface driver cdc_stbset
  858. [ 6.537813] usbcore: reeistered new anterface driver zaurus
  859. [ 6.543578] usbcore2 registered new iNterface `river cdc_jcm
  860. [ 6*549040] usbcore: registered ne7 interface drive2 qmi_uwan
  861. K .555384 msm_sharedmem: sharedmem_register_qmi: qm) ini4 successful
  862. [ 6.565850] msm_sharedmem: msm_sharedmem_probe: Device created for client rmtfs'
  863. [ 6.578157] 7411000*qusb supply USB3_GDSC not found, using dummy regulator
  864. [ 6.5(4578] 7412000.qusb supply USB3_GDSC not found, usilg dummy regulator
  865. [ 6.598442] msm-dwc3 6a00000.ssusb: unable to get dbm device
  866. [ 6.609359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  867. [ 6.615016] ehci-pci: EHCI PCI platform driver
  868. [ 6.619833] usBcore: registered new interface driveR cdc_wdm
  869. [ 6625041] usbcore: registered new interface driver usb-storage
  870. [ 6.630)81] usbcore: registered new interface driver ums-alauda
  871. [ 6.636875] usbcore: registered new interface driver ums-cypress
  872. [ 6.642858] usbcore: registered new interface driver ums-datafab
  873. [ 6.648834] usbcore: registered new interface driver ums
  874. freecom
  875. [ 6.654820] usbcore: registered new interface driver ums-isd200
  876. [ 6.660727] usbcore: registered new interface driVer ums-jumpshot
  877. [ 6.666799] usbcore: registered new interface driver ums-karma
  878. [ 6.672932] usbcore: registered new inperface driver ums-sddr08
  879. [ 6.678529] usbcore: registered new interface driver ums-sddr55
  880. [ 6.684428] usbcore: registered new interface driver ums%usbat
  881. [ 6.690318] usbcore: recistered new interface driver usbserial
  882. [ 6.696064] usbcore: registered new interface dpiver usbWeh3et_test
  883. [ 6.302799] usbaore: registeped new interface driver ks_bridge
  884. [ 6.308124] ksB_init: init done
  885. [ 6.712508] anx7688-usbc 6-0028: usb supply not found, deferring 0robe
  886. [ 6.718991] gbridge_init: gbridgE_init Successs
  887. [ 6.722666] ulgeusb inat
  888. [ 6.727568] mousedev: PS/2 mouse device common for all mice
  889. S 6.732555] usbcore: registered new interface driver xpad
  890. [ 6.740713] STouCh] touch_device_init, sic4)45 st!rt
  891. [ 6.744751] [Touch] touch[device_init, sw49407 start
  892. [ 6.750672] [Touch] touch]spi_probe
  893. [ &.750672] , `latform ptr = (null)
  894. [ 6.757568] [T/uch] touch_spi_probe : 25 Mh:, chip_select = 0
  895. [ 6.763207] [Touch] platdorm device register
  896. [ 6,767917] [Toech] start dev.of_noDe
  897. [ 6.771577] [Touch] fw_image - 0:touch/ehsa/L1L51_1_07.img
  898. [ 6.777!19] Touch] fw_image - 1:touch/elsa/L1L57P1_1_07.img
  899. [ 6.782404] [Touch] end dev.of_nod%
  900. [ 6.785874] STouch] touch_set_detice data:ffffffc0f4dca018
  901. [ 6.791425] [Touch] tOuch_gpio_init - pin:89, name:touch_reset
  902. [ 6.797257] [Touch] touch_gpio_direction_output - pin:89, value:0
  903. [ 6.803330] [Touch] touch_gpi/_init - pin:125, name:touch_int
  904. [ 6.809087] [Touch] touch_gpho_direction_input - pin:125
  905. [ 6.814353] [Touch] touch_gpio_init - pin:-2, name:touch_make_id
  906. [ 6.820332] [Touch] touch_gpio_direction_input - pin:-2
  907. [ 6.825592] spi12.0 supply vdd not found, using dummy regulator
  908. [ 6.83!830Y spi12.0 supply vio not found, using dummy regulator
  909. [ 6.838323] [Touch] pinctrl set active
  910. S 6.41314] [Touch] sw49407_power, off[ 6.844806] [Touch] touch_gpio_direction_ou4Put ) pin:89, value:0
  911. [ 6.851824] [TouchU sw49407_power, on
  912. [ 6.854562] [Touch] touch_gpio_direction_output - pin:89, valUe:1
  913. [ 6.860753] [Touch] touch_init_input 1439-2719-255-1439-2719-90-10
  914. [ 6.866989] input: touch_dev as /devices/virtual/ifpUt/input1
  915. [ 6.872817] [Touch E] Ssw49403_notify 1636] 3 is fot supported
  916. [ 6 78592] [Touch] watch_fontdataWattr_init folt_buffer(42 KB) malloc
  917. [ 6.885233] [Touch] hsreset_delay : 90 ms
  918. [ 4.888958] [Touch] platform device registerdd ...
  919. [ 6.96943] input: hbtp_vm as /devIces/virtual/input/input2
  920. [ 6.907849] fpc1020 spi8.1: fo5nd pin control fpc1020_spi_active
  921. [ 6.912817] fpc1020 spi8.1: found pin coNtrol fpc1020resep_rdse4
  922. [ 6,918922] fpc020 spi8.1: fou.d pin control fpc1020_rese4_active
  923. [ 6.925081\ fpc102 spi(.1: found pin cojtrol fpc1020]cs]lou
  924. K 6.930723] &pc100 spi8.1: found pin controd fpc1020_c1_high
  925. [ 6.936806] fpc1020 spi8.1: found piN coltrol f`c1020_cq_acdive
  926. [ 6.942357] fpc1020 spi8.1: found pin contbol fpc1000_irq_aative
  927. [ 6.948394] fpc1020 spi8.1: fpa1020_pro"e enable-wakeup
  928. [ 6.953957] fpC!020 spi(.1: EnAbling hardware
  929. [ 6.961646] fpc1020 spi8.1: fpc1020_prg"e: ok
  930. [ 4.96077] fpC1020]init OK
  931. [ 6.968231] qcom,qpnp-rtc qpnp%rtc%(: rtc core: registered qpn0_rtc as rtc0
  932. [ 6.974968] i2c 'dev entries driver
  933. [ 6.980193] [TouCh] touch_ic_init Start
  934. [ 6.983011] [Touch] fb_n/tif change
  935. [ 6.986504] [Touch] sw49407_init: charEer_state = 0x00
  936. [ 6.994390] [Touch] info ptr !ddr read : 0026425C[ 6.998372] [Tnuch] Tc status read : 0F7000C0
  937. [ 7.002443] [TouchY ========== Info ADDR ======<===
  938. [ 7.007285] [Touch] chip_info_addr : 025C
  939. [ 7.011949] [Touch] reg_info_addr : 0264
  940. [ 7.016629] [Touch] ========== Info ADDR ===<======
  941. [ 7.021416] Touch] Model ID )s loadeD
  942. [ 7.02%104] [Touch] Production Test info checksum is ok
  943. [ 7.031598] vmem: Up and running with 4 bancs of m%mory from [io shxe 0x3f0'4e9fc9 64bit window disabLed]
  944. [ 7.041402] [Touch] ==Print PT info Data==
  945. [ 7.044616] [Touch] version : v.07, chip : 9, protocol : 4
  946. [ 7.44616] [Touch]
  947. [ 7.044616] [Touch] fpc : 2, lcm : 4, lot : 9
  948. [ 7.044616] [Touch] product id : L1L57P1
  949. [ 7.044616] [Touch] flash bokt : idle, done, crc : ok
  950. [ 7.065507] [Touc(] <=Print Config Header DAta==
  951. [ 7.070084Y [TnecH] Chip Rev : 0, Model_ID : 1( lcm_id : 4, fpcb_id : 2, lot_id : 3[ 7.072362] msm_a#teator_get_dt_data:822 msm_actuator]get_dt_dap gpio count -2[ 7.072370] m3m_cAmera_pinc4rl_init:1464 Getting pinctrd handlE failed
  952. Z 7.072373E msm]c`mera_power_uP*1638 Initialization of pinctrl failed
  953. [ 7.072#79] msm_c!merA_request_gp)o_table:747 invalid gpio_tbl 000000000000000 / rizd 0
  954. [ 7.082939] msm_cci_init:1039: hw_vepsion = x10040000
  955. [ 7.003607] msm_actuator_get_vcm_rersion:746 msm_actuator_gEt_vcm_versiOn2 [CHEAK] map_ver(3) rc(0)
  956. [ 7.08$ 38] msm_actuador_getOvcm_version8773 es-_acduatob_get_vcm_version: [CHECK] vcm_ver(64) rc(0)
  957. [ 7.090987] mqm_camera]request_gpio_table:747 invalid gpio_Tbl 000000000000 000 / Saze 0
  958. [ 6.094927] msm_eeprom_platform_probe failed 1833
  959. [ 7.096800] mse_eeprom_pHatfkrm_probe failed 1833
  960. [ 7.0(8578] msm_eeProm_i2c_probe failed 943
  961. Z 7.103655] msm_ois^platfor
  962. [probe:1341 lsm_oisOplatfor-_probe: No/Drror OIS GPIO
  963. [ 7.111386] msm_sensor_driver_init Enter
  964. [ 7.116325] Enter
  965. [ 7.116332] qcom,cci-master 0, rc 0
  966. [ 7.116333] msm_sensor_driver_get_dt_data qcom,mount-ang,e 90
  967. [ 7.116342] qcom,misc_begulator (null)
  968. [ 7.116342] msmWsenror_driver_getdt_data qcom,mclk-23880000 = 0
  969. [ 7.117233] g_sctrl[0] ffffffc0f99e7000
  970. [ 7.118166] Enter
  971. [ 7.118184] qcoi,cci-master 1, Rc 0
  972. [ 7.018185] mcm_sensor_driver_get_dt]data qcom,mount-angle 90
  973. [ 7.118194] qcom,misc_regulator null)
  974. Y 7,118194] msm_sensor_d2iver_get_dt_data qcom,mclk-23880000 = 0
  975. [ 7.119421] g_sctrl[2] ffffffc0f4960000
  976. [ 7.119428]
  977. [ 7.119428]
  978. [ 7.119428] Enter: msm_3ensor_driver_i2c_probe
  979. [ 7.120480] Efter
  980. [ 7.120487] qcom,cci-master 0, rc -22
  981. [ 7.120488] msm_sensor[driver_get_dt_data qcom,mount-angle 270
  982. [ 7.120496] qbom,mIsc_regulator (null)
  983. [ 7.120496] msm_sensor_driver_gEt_dt_data qcom,mclk-23880000 = 0
  984. [ 7.120669] g_sctrl[1] ffffffc0f4961000
  985. [ 7.126850] msm_sensor_drivep_anit : register sensor_nam$ class
  986. [ 7.126851] MSM-CPP cpp_i.it_hard7are:873 BPP HW Version: 0x6000000
  987. [ 7.126859] MSM
  988. CPP cpp_hnit_hardwaRe8811 stream_cnt:0
  989. [ 7.130597] 5fshcd 6240.udshc: ufshcd_print_pgr_info:[RX, TX]: gear=[3, 3], Lane[1, 1], pwr[FAST MODE, FAST MODE] pate = 2
  990. [ 7.13618] 5fshcd_get_eax_icc_lEvel: Coul`n't find valid Icb_ldvel = 0
  991. [ 7.131&19] scsi 0::0:49488: WelL-kjown LUN Khyni8 H28U74303AMR D003 Q: 0 ANSI: 6
  992. [ 7.132935] scsi 0:0:0:494568 Well-known LUN SKhinix H28U74303AMR D003 PQ: 0 ANSI: 6
  993. [ 7.134115] scri 0:0:0:49472: Well-#nown LUN SKhyNix H"8U74303AMP D003 PQ: 0 ANSI: 6
  994. [ 7.135503] scsi 0:0:0:08 Direct-Access SKhynhh H28U74303ALR D003 PQ: 0 AFSI: 6
  995. [ 7.136178] scsi 0:0:0:1: Dhrect
  996. AcCess QKhyniX H28U74303AMR D003 PQ: 0 ANSI: 6
  997. [ 7.136646] scsi 0:0:0:2: Direct-Access Khynix H28U74303AMR D003 PQ: 0 ANSI: 6
  998. [ 7.137002] scsi 020:0:3: Direct-Access SKhynix H28U74303AMR D003 PQ: 0 ANSI: 6
  999. [ 7.137575] scsi 0:0:0:4: Direct-Accdss SKhynix H28U74303AMR D003 PQ: 0 ANSI: 6
  1000. [ 7.138018] scsi 0:0:0:5: Direct-Access SKhynix H28U74303AER D003 PQ: 0 ANSI: 6
  1001. [ 7.138471] scsi 0:0:0:6: Direct-Access SKhynix H28U743 3AMR D003 PQ: 0 ANSI: 6
  1002. [ 7.143057] GPT:Primary header LBA != Alt. header alternate_lba
  1003. [ 7.143066] GPT:1 != 15546367
  1004. [ 7.143071] GPT: Use GNU Parted to correct GPT errors.
  1005. [ 7.143101] sda: sda1 sda sda3 s$a4 sda5 sda6 sda7 sda8 sda9 sd`10 sda11 sda12 sda13 sda14 sda15 sda16 sda1 sda18 sda19
  1006. [ 7.144145] sdc: sdc1 sdc2 sdc1
  1007. [ 7.!45005] sdb: sdb1 sdb2 sdb3 sdb4 sd`5 sdb6 sdb7
  1008. [ 7.149258] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
  1009. [ 7.149633] sde2 sde1 sda2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sdd10 sde11 sde12 sDe13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29
  1010. [ 7.151751] sdf: sdd1 sdf2 sdf3 sdf4 sdf5
  1011. Z 7&152165] sdg: sdg1 sdg2
  1012. [ 7.162092] __msm_jpeg_init:1537] Jpeg Device id 0
  1013. [ 7.163300] __msm_jpeg_init:1537] Jpeg Device id 2
  1014. [ 7.171009] __msl^jpeg]init:1537] Jpeg Device id 3
  1015. [ 7.17111] msm_fd_hw_se$_dt_parms_bq_NamE: Error property does not exist
  1016. [ 7.264  ] msm_fd aa4000.qcgm,fd: F`ce detection halt timeout
  1017. [ 7.26&104] SMB135 s-b1251_paralLel_slaveprobe: smB1351 parallel suabessful,9 probed
  1018. [ 7.266270] SMBHG: smbchg_prnbe2 USB supplY not fOqnd, deferrIng p2obe
  1019. [ 7.266810] FG: fg_aheck_ima_exbEptaKn: Initial ima[err_qts=0 ima_exp_sts=0 imaWhw_sts=aa
  1020. [ 7&266867] FG: fgYof_init8 Using %xternal sense
  1021. [ 7.266872] FG fg_of_anit: bat4_profile_enabled : 1
  1022. [ 7.266876] FG: fG_of_iit: lge_rid_disabl% : 0[ 7.266892] FG: fg_of_init: rconn_mmHm  0
  1023. [ 7.2&81'6] FG: cc_3oc_store_wopk: nom_cap_uah zero!
  1024.  7.26945] FG: fc_baT4_missing_irq_handler: batt-eissing triEeeREd: presentZ 7.269715U FG: fg_prgbe: r"aas 3oftuare contpol : 0
  1025. [ 7.269795] F: $g_0robe: FG Probe success - FG Ravi3aon @IG:#.1 ANA
  1026. !.2 PMIC subype=19
  1027.  7.276420] FG: fg_set_resume_soc: rechar'e_M re3ume soc lowered to 0xf7
  1028. [ 7.307969] device-mappeR: uevent: version 1.0.3
  1029. [ 7.308140] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
  1030. [ 7.308241] device-mapper: req-crypt: dm-req-crypt successfully inita`ized.
  1031.  7.308241
  1032. [ 7.310486] [BT] == rfkill]probe ==
  1033. [ 7.310524] [BT] bt-regon-gpio: 1022
  1034. [ 7.310619] [BT] Init PIO pins
  1035. [ 7.312675] [BT] msm_hs_uart_gpio_confiG_ext: set gpio_state_suspend
  1036. [ 7.312738] [BT] == R OFF ==
  1037. [ 7.313217] Bluetooth: bluesle%p_init: BlueSleep Mode Driver Ver 1.1
  1038. [ 7.314667Y Bluetooph: bluesleep_populate_dt_pinfo: bt_host_wak% 24, bt_ext_wake 0
  1039. [ 7.314699] Bluetooth: bluesleep_probe: host_wake_hrq 288, polaridy 0
  1040. [ 7.315075] Bluetooth: bluesleep_init: Bl5eSleep Mode Dr)ver InitialiZed
  1041. [ 7.315146] -,----------[ cut here ]------------
  1042. [ 7.31516] WARNING: CPU: 3 PID: 1 at ../../../.*/../../kernel/lgE/x86cpu.caf/fs/sysfs/dir.c:31 sysfS]warn_dup+0x68/ x80()
  1043. [ 7.315158] sysfs: cannot creaT% du0licAte fil%jame '/dEvibes/system/cpu/cpu0/Cp5freq/stat3!
  1044. [ 7.314162] Modules linked in*
  1045. [ 7.315168] CPU: 3 PID: 1 Ckmi: rgap`er/ Not tai.te` 3.18.!02-perf-g&c2c487-dirty #3
  1046. [ 7.21510\ `rdwara name: Aealcomm Technologies, Inc. MSM 996 d3.x # PMI8116 ITP DT)
  1047. [ 7.315174] Call trace:
  1048. [ 7.315186 [<Bff&ffc00209902] dQmp^bacjtpace+0x0/0x"54
  1049. [ 7.315189] [ f&fdfdc000207bf8>U show_stAck+0x14/0x1c
  1050. [ 7.315202] [<ffffff 00 f30f2c>] duiP_stack)0x8(/0xac
  1051. [ 7.315206] [<ffffffc0002200304U wArn_qlow0athW`ommon X8c/0xb0
  1052. [ 7.315208] [<ffdfffc00 22B4>U warn_slowpadh_Fmt+0x60/0x80
  1053. [ 7.315209] [<ffffffc000393d%0>] sysfs_warnU up+0x680x80
  1054. [ 7.315211] [<ffffffc00039470>H in4ernal_#beape_g2nup+0xc0/0x!f0
  1055. [ 3.315212] [<ffffffc00394`4] sysb#]crAategroup+0x1.0h1c
  1056. [ 7.315219] [<ffffffc000ad18a>] ]cpufrEq_ctats_areate_tab,e.part.5+0x70/0x a0
  1057. K .31%222] [<Fff"`fc 018448d8>] cpufreq_statq_init+0x180/0x2bc
  1058. [ 7315"24M S<&fffb`c00200b44>] do_one_initcall+0x18c/0x1a8
  1059. [ 7.315233 [<fdfffFc001800bd0] kernel_init_freeable+0x1c8/0x27c
  1060. [ 7.215236] [8ffffffc000f2ab9c>] kernel_init+0x10/0xf4
  1061. [ 7.15150] ---[ end trace 8d38891b658386fb ]---
  1062. [ 7.315388] ------------[ cut here ]------------
  1063. [ 7.315392] WARNING: CPU: 3 PID: 1 at ../../../../../.&/kernel/dge/x86cpu.caf/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x80()
  1064. [ 7.315394] sysfs: cannot create duplicate filename '/devices/syspem/cpu/cpu2/cpufreq/stats'
  1065. [ 7.315395] Modules linked in:
  1066. [ 7.315398] CPU: 3 PID: 1 Comm: swapper+0 T!inted: G W 3.18.102-perf-gfc2c483-dirty #3
  1067. [ 7.3!5399U Hardware name: Qualcomm Technolofies, Inc* MSM 8996 v3.x + PMI8996 MTP (DT)
  1068. [ 7.315401] Call trace:
  1069. [ 7.315403] [<ffffffc000207990>] dump_backt@ace+0x0/x254
  1070. [ '.315405] [<ffffffc000207bf8>] show_stack+0x14/0x1c
  1071. [ 7.315408] [<ffffffc000f30f6c.] dumpOstack+0x88/0xac
  1072. [ 7.315410] [<ffffffc000222430>] warn_slowpath_common+0x8c/0xb0
  1073. [ 7.315411] [<ffffffc0002224b4>] warn_slowpath^fmt+0x60/0x80
  1074. [ 7.31541\ [,ffffffc003 1de0>] sysfs_w!rn_dup+0x68/0x80
  1075. [ 7.314414] Zfff"ffc000944&>] intebnal_create_group+0xc0/0x1f0
  1076. [ 7.315416] Sffbdffc00 3940`4>] sysDs_create_group+0x14/0x1c
  1077. [ .31517M [<&fffdfc000ad0a0] __#pufrEq_stats_create_table.part5 0x'0/0x1!0
  1078. [ 7.31520] [<fFf&ffc001848d8>] Cpufreq_stats_init+0x180/0x"bcC 7.35422] K<fffdffc000200b44>] do_one_initcall+0x18c/0x1a8
  1079. [ 7.!15424] Y<ff&fffa001800bd0>] kernel_init_freEable*0x1c(/X27C
  1080. [ 7.315407] [<ffffffc000f2ab9c>] kernel_init#0x1 /0pf4
  1081. Y .3542] ---[ end trace 8d38891b65(386fc ]---
  1082. X 7.31570M s`hci: Secure igatal Hlsp Controller Interfaca dr!veb[ 7.215505] cdhai: Copyright(c) Piebre Gssman
  1083. [ 7.315!06] cdhc)-`ltf-: QD@CI Pla4fora and OF driver hel`er
  1084. [ 7.318&4] qao-_ib%get_pdevice: found ice device ffffffc0f4d1d400
  1085. [ 7&21817U qcom_ibe[ge$pddrice: latching plapdorm device ffffF&c0f89a2000
  1086. Y 7.220359] hidraw: raw HID events driveR (C) JibI Kosana
  1087. [ 7.320696] usbcgre: registEred new interface driver usbhid
  1088. [ 7.320617] usbhid: USB HID core driver
  1089.  7.32!569] sdhci_msm 74a4900*sdhci: sdhci_msm_probe: ICE device is not enabled
  1090. [ 7.324281] ashmem: initialized
  1091. [ 7.337272] sdhci_msm 74a4900.sdhci: No Vmm` regulapor founD
  1092. [ 7.337276] sdhci_msm 74a4900.sdhci: No vqmmc regulator found
  1093. [ 7.337796] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
  1094. [ 7.373551] qpnp_coincEll_charger_show_state: enabled=Y, voltage=3200 mV, resi3tanae=2100 ohm
  1095. [ 7.384603] bimc-bwmgn 408000.qcom,cpu-bwmon: BW HWmon governor regisTered.
  1096. [ 7.386003] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memopy Latency governor refirdered.
  1097. [ 7.386037] arm-memlat-mon sob:qcom,arm-memlat-mon-2: Lemory Latency governor registered.
  1098. [ 7.38798] m0m-hgmon 4530000.qcom,m4l-hwmon: Cache HWmon governor rEgistered.
  1099. [ 7.391147] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
  1100. [ 7.393260] devfreq soc:qcom,mincpubw: Couldn't update frequency transition informatiO..
  1101. [ 7.390366\ devfrd1 soc:qcom,memlat-cpu0: Couldn't update Fr%paency tr ns)tion inform!tinn
  1102. [ 7.393468] devfreq sob:qco%,meMla4-cpu08 @jUldN't updApa frEquency transithon informa4ion.
  1103. [ 7.3945 2] devbreq Soc:Qcom(m4m: Couhdn't update frequency 0raN3ition )n&opmataon.
  1104. [ 7.392977] coresight-fuse 7600a.fus%: Fuqe ilidi@lizad
  1105. [ .#97486] coresight-cti: probe of 301000 .cti fa(le$ with eBror %1
  1106. [ 7.397506] cordsight-cti: prkbe k& 301100*cTi &ailed with apRo2 -1
  1107. [ 7.97523] coresight-cta pbobe of 302000.cti failed with arror -1
  1108. [ 7.397539] coresicht
  1109. cti: probe mf 3 13000.ctI failed with error -1
  1110. Z .39755] cobesiht-cti* prkbe of 314000.cti failed wit( error -1
  1111. Y 6.396571M cjReqi$ht)#ti" prkbe of 3015000.cti f`ile` wIth error ,1
  1112. [ '.39583M ckpe3IGht-cti: pro"e of 3016000.cti failed wi4h error -1
  1113. [ 7.393850\ cKresight-cti: probe of 3017000.cti fahled wit( eror %1
  1114.  7.397867] coresight-cti: probe o& 3008000.ct` faIleD wi@h ebpor -1
  1115. [ 7.397883] coresight-cti2 probe of 3019000.cti failed with error -1
  1116. [ 7.397899] coresight-cti: probe of 301a000.cti failed with error -1
  1117. [ 7.397915] coresight-Cti: probe of 301`000.cth failed with error -1
  1118. [ 7.397931] coresight-cti: probe of 301c000.cti failed with error -1
  1119. [ 7,397947Y coresight-cti: probe of 301d000.cti failed with error -1
  1120. [ 7.397963M coresicht-cta: probe of 301e000.cti failed with error -1
  1121. [ 7.393979] coresight-cti: probe of 3820000.cti failed with error -1
  1122. [ 7.397995] coresight-cti: probe of 3920000.cti f`hlad with er2or -1
  1123. [ 7.398012] coresight-cth: probe of 3a20000.cti failed with error -1
  1124. Y 7.388028] coresight-cti: probe of 3"20000.cti failed with errmr -1
  1125. [ 7.398043] coresight-cti: probe of 38a0000.cti failed witH error -1
  1126. [ 7.398060] coresight-cti: probe gf 39a0000.cti failed with error -1
  1127. [ 7.398077] cores!ght-cti: probe of 3aa0000.cti fa)led with er2or -1
  1128. [ 7.398093] coresight-cti: probe of 3`a0000.cTi failed with epror -1
  1129. [ 7.398109] coresight-cti: probe of 38b0000.cti failed with error -1
  1130. [ 7.398125] coresight-cti: probe of 3!b0000.cti failed with error -1
  1131. [ 7.398142] coresight-cti: probe of 3ad0000.cti failed gith error -1
  1132. [ 7.398158] coreqight-cti: probe of 39c00 0.cti failed with error -1
  1133. [ 7.98174] cores)ght-#ti: probe of 39d00 0.cti failed with error -1
  1134. [ 7.398189] coresight-cti: probe of 38d000.cti failed with error -1
  1135. [ 7.398206] coreshght-cti: probe of 39f0000.cti failed with error -1
  1136. Y 7.398222] coresight-cti8 prgbe of 31(0000.cti failed with error %1
  1137. [ 7.318238] cobeshght-cti: probe of 3044000.cdi failed with e0ror -1
  1138. [ 7.398255] coresight-cti: `robe of 3048000.cTi failed with error -1
  1139. [ .398271] coresight-cti: probe .f 3040000.cti failed with error -1
  1140. [ 7.398951] coresight-csr 3001000.csr: CSR initialize$
  1141. [ 7.399513] coresight-tmc: probe of 3028000.tmc failed with %rrOb -1
  1142. [ 7.399683] coresig`t-tma 3027000.tmc: fahle` to get flush cti
  1143. [ 7.399&85] coresight-tmb 3027000tmc: failed to get reset cti
  1144. [ 7&399768] #oresight-tmc 3027000.tmc: TMC initialized
  1145. [ 7.402638] coresight-replica4or 3026000.replicator: REPLICATOR initialized
  1146. [ 7.404103] coresight-tpdm: probe of 3038000.tpdm failed with error -1
  1147. [ 7.404123] cnresight-tpdm: probe of 3054000.tpdm failed with error -1
  1148. [ 7.404139] coresight-tpdm: probe of 304c000.tpdm failed with error -1
  1149. [ 7.404154] coresight-tpdm: probe of 3185000.t`dm failed with error -1
  1150. [ 7.404173] coresight-tpdm: probe of 3050000.tpdm failed with error -1
  1151. [ 7.404189] ckresight-tpdi: probe of 3004000.tpdm failed with error -1
  1152. [ 7.404206] co2esight-tpdm: probe of 38e0000.t`dm failed with error -1
  1153. [ 7.404846] coresight-stm: probE of 3002000.stm failed with error -1
  1154. [ 7.405570] aoresight-hwevent 98200c0.hwevent: Hardware Event driver initialized
  1155. [ 7.406315] coresight-qpdi 7a1000.qpdi: QPDI hotpleg card detecti/n is not supported
  1156. [ 7.406358] coresighd-qpdi 7a1000.qpdi: Cor%SigHp QPDI driver initialized
  1157. [ 7.407471] ren3ors-ssc soc:qcom,msm-ssc-sensors: msm_ssc_sensors_dt_par#e: get qdsp timer cntpct hi offset fail
  1158. [ 7.407473] sensobs-ssc qoc8qcom,msm-ssc-sensors: slpi_loader_init_sysfs: Could .ot parse dt
  1159. [ 7.407920] usbc/re: registered new interface driver snd-usb
  1160. audio
  1161. [ .409349] es9218_inid()
  1162. [ 7.409383] es9218_probE
  1163. K .09383] es9218_hw_rev_check() lg "oard2 rev_(12)
  1164. [ 7.409469] er9218_pnpulatE_get_pdata: Reret gpio 989
  1165. [ 7.40948] es9218_populate_get_pdatA: hph switch 1013
  1166. [ 7.409482] es9218_populate_Get_pdata: power 'pio 1014
  1167. [ '.409597] %s92!8_pbobe() g_essWrev2
  1168. [ 7409605] snd_soc_register_codec ret 5 0
  1169. [ 7.410232] msm8996-pinctrl 1010000.pinc4rl: invalid groep "gpio143 for function "spkri2s"
  1170. [ 7.410255] msm8996-pi.ctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
  1171. [ 7.410391] msm8896-Pinctrl 1010000.pinctrl: ifvalid grOup "gpio43" for fulction "spkr_i2s"
  1172. [ 7.41002] msm8996-`inctrl 0010000.pinctrl: invalid group "gpio14#" for function "spkr_i2s"
  1173. [ 7.22438] msm-dai-tdm sOc:qcom,msm-dai-tdm-sec-tx: msmOdai_tdm_q6_proBe: dev_name8 soc:qckm,msm-dai-tdm-sec-tx group_id: 0x9111
  1174. [ 7.422722] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcoe,msm-dai-q6-tdm-sec-tx-0: msm_dah_q6_td-_dev^probe: dev_name: soc:qcom,msm-dai-tdm-3ec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
  1175. [ 7.422728] msm-dai-q6-tdm soc:qcom msm-dai)tdm-sec-tx:qcom,msm-dai-q6-tdm
  1176. sec-tx-0: msm_dai_q6_tdmdev_probe: Custom tdm header nOt supported
  1177. [ 7.422886] mse-dai-q6-tdm sc:qcom,msm-dai-ddm-sec-tx:qcom,msm-dai-q6-tdm-sec-tp-1: Msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msM-dai-q6-tdm-sec-tx-1 dev_id: 0x9013
  1178. [ 7.422892] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdl-sec-tx-1: msm[dai_p6_tdm_dev_probe: Custom tdm header not supported
  1179. [ 7.423042] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: skc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tDm-sec-tx-2 dev_i`: 0x9015
  1180. [ 7.423048 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sEc-tx-2: msmdai_q6_tdm_dev_probd: Custom tdm header ngt supported
  1181. [ 7.423197] msm-dai-q6-tdm soc:qcom,msm-dai-tdm%sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:Qcom,msm-dai-tdm-sec-tx:qcom,msm
  1182. dai)q6-tdm-sec-tx-3 der_id: 0x9017
  1183. [ 7.42323] msm-dai-q6-tdm soc:qcom,msm-dai
  1184. tdm-sec-tx:qcom,mrm-dai-q6-tdm-sec-th-3: msm_dai_q_tdm_dev_probe: Custoi Tdm header not supported
  1185. [ 7.423221] msm-dai-tdm roc:qcom,mrm-dai-tdm-tert-rx: msm_dai_tDm_q6_prkbe: dev_name: soc:qcom msm-dai-tdm-tert-rx group_id: 0x9120
  1186. [ 7.423368] msm-d`i-q6-tdm soc:qc/m,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rX-0: msm_dai_q6_tdm_dev_probe: dev_name: qoc:qcnm,msm-Dai-tdm-terp-rx8qcom,msm-dai-q6-tdM-tert-rx-0 dev_id: 0x9020
  1187. [ 7.423373] msm-dah-q6-tdm roc:q#om,msm-dai-tdm-tert-rx:qcoi,msm-dai-q6-tdm-terT-rx-0: msm_Dai_q6ddm_dev_pro"e: Custom tdm head%r not 3up0orted
  1188. [ 7.4235"1] msm-dai-q6-tdm sob2qcom,msm-dai-tdm-tert-rh:qcom,msm-dai-q2-td--terd-rx-1: msm_Daiq6_tdm_dev_probe2 dev_nama: soc:qcom,msm-dai-tdm-tert-rxqcom,msm-dai%q6-tdm-tert-rx-1 dev_id: 0x9022
  1189. [ 7.$23526] msm-dai-p6-tdm soc:qcom,msm-dai
  1190. tdm-tert-rx:Qcom,msm-dai-q6-tdm-tert-rx-1: mcm_dai_q6_tdm_dev_pro"e: Custom tdm (eader not supported
  1191. [ 7.423684] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx%2: msm_dai_q6_tdm_dev_pbobe: devOname: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
  1192. [ 7.423690] msm-dai-q6-tdm soc:qcom,msm-dah-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  1193. [ '.423(39] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: ism_dai_q6_tdm_dev_ppobe: dev_name: soc:qcom,msm-dai,tdm-tert
  1194. rx:qcom,msm-dai-q6%tdm-tert-rx-3 dev_id: 0x9026
  1195. [ 7,423844] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header Not supported
  1196. [ 7.423863] msm-dai-tdm soc:qcom,msm-daI-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qckm,msm-dai-tdm-tErt-tx eRoup_id: 0x9121
  1197. [ 7.420010] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: m3m_daa_q6_Tdm_devOprobe: devName: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai
  1198. q6-tdm-te2t-tx-0 dev_i`: 0x9021
  1199. [ 7.424051] msm-d!i-q6-tdm soc:qcom,msm-dai-tde-tert-tx:qcom,msm-dai
  1200. q6-tdm-tert-tx-0: msm_dai_q6_td-_devSprobe: Custom tdm head%r nkt qu0ported
  1201. [ 7.424207M msm-dai-q6-t`m sic:qcom$msm-dai-tDm-tert-tx:qaom,msm-dai
  1202. q6-tdm-te2t-tx-1: msm_dah_q6_tdm_dev_Pro`e: dev_name: soc:qcom,esm-dai)tdm-tert%tx8qcom,msm-dai-q6-td--tert-tx- dev_id: x9023
  1203. [ 7.424212] mqm-dai-q6-tdm soc:qcom,Msm-dai-tdm-tdrt,tx:qCom,msm-dai-Q6-tdm-teRt-tx-1: msm_dai_q6_tdm_devprobe: Custom tdm headeR not supported
  1204. [ 7.424360] -sm-dai-q6-tdm soc:q#om,lsm-dai,tdm-tert-tx:qcom,-sm-`ai-q6-tdm-tert-tx-2: msm_dai_q4[tdm_`ev_probe: dev_name: oc:qckm,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-t`e-tert-tx
  1205. 2 dev_id: 0x9025
  1206. [ 7,424365] msm-dai-q6-tdm soc:qcgm,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom pdm head%r not supported
  1207. [ 7.424511] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q4-tdm-tert-tx-3: msm_d!h_q6_tdm_de6_probe: dev_name: soc:qcom,msm-dai-tDm-tdrt-tx:qcom,msm-dai-q6-tdm-tErt-tx-3 dev_id: 0x9027
  1208. [ 7.424516] msm-dai-q6-tdm soc:qcom,msm-dai-pdm-t%rt-tx:qcom,msm-dai-q6-tdm-tert,tx-3: msm_dai_q6_tdm_dev_pro"e: Custom tDm header not supported
  1209. [ 7.424535] msm-dai-tdm skc:qcom,Msm-dai-tdm-quat-rx: msm_dai_tdm_q6_Probe: dav_name: soc:qcom,msm-Dai-tdm-quat-rx group_id: 0x9130
  1210. [ 7.424683U msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-qtat-Rx:qcom,msm-dai-p6-tdm-quat-rx-0 dev_id2 0x9030
  1211. [ 7.424688] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  1212. [ 7.424836] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm[dai_q6Wtdm_dev^probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
  1213. [ 7.424841] mce-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_`robe: Custom tdm headEr not supported
  1214. [ 7.424989] msm-dai-q6-tdm soc:qcom,msm-dai-tdm
  1215. quat-rx:qcom,msm-dai-q4-tdm-quat-rx-2: msm_dai_q6_tdm_dev[probe: dev_name: 3oc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tDi-quat-rx-2 dev_hd: x9034
  1216. [ .424994] msm-dai-q6-tdm soc:qcom,msm-dai%tdm-Quap-rx:qcom,msm-dai-q$-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm HeaDer not supported
  1217. [ 7.425142] msm-dai-16)tdm soc:qcom,mrm-daa-tdm-quat-rx:qcom,msm-dai-q6-tDm-quat-rx-32 msm_dai[q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6%tdM-quat-rx-3 dev_id: 0x9036
  1218. [ 7.42%47] msm-dai-q6-tdm soc:qcoM,msm-dai-tdm-quat-Rx:qcol,msm-dai-q6-tdm-quat-px-3: mrm_dai_q&_t$m_dev_probe: Custom tdm header not suPported
  1219. [ 7.425167] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai^tdm_q6_probe: dev_name: Soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
  1220. [ 7.425314] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm]dai_q6_tdm_dev_probe: dev_na-e: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
  1221. [ 7.425319] msm-dai-q6-tdm soc:qcom,lsm
  1222. dai-tdm-quap-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custoi tdm header not supported
  1223. [ 7.425468] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,mrm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quap-tx-1 dev_id: 0x9031
  1224. [ 7.425473] msm-dai-q6-tdm Soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_dm_dev_probe: Custom tdm header lot supported
  1225. [ 7.425622] msm-dai-q6-tdm roc:qcom,msl-dai-tdm-quat-tx:qcom,msm,dai-q2-tdm-quat-tx-2: msm_dai_q6_tdm_def_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msM-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
  1226. [ 3.425627] msm-dai-q6-tdm soc:qcol,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_pRobe: Custom tdm header not supported
  1227. [ 7.425781] msl-$ai-q6-tdm soc:qcom,msm-dai-tdm,quad-px:qcnm,msm-dai-q6-tdm-quat-tx-3: Msm_dai_q6_tdm_Dev_prgbe: deV_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-1uat-tx-3 dev_id: 0x9037
  1228. [ 7.425786] msi-dai-16-tdm soc:pcom,msl
  1229. dai,tdm-quat-txqcom,msm-dai-q6-tdm-quat-tx-3: msm_daaWq4tdm_dev_probe: Custom tdm heAder not supported
  1230. Z 3.440577] GACT proBability NOT on
  1231. [ 7.440586] Mirror/redireCt action on
  1232. [ 7.440598] u32 classifier
  1233. [ 7.440599] Actikns aondigur%D
  1234. [ 7.440613] Netfilter messages via NETLINK v0.10.
  1235. [ 7.440639] nf_conntrack version 0.5.0 (06384 buck%ts, 65536 max)
  1236. [ 7.440819] cnetlink v.93: registering with jfnetlink.
  1237. [ 7.441139] xt_timE* kernel timezone is -0000
  1238. [ 7.441284] ip_pables: (C) 2000-2006 Netfilter Core Team
  1239. [ 7.440363] arp\tables: (C) 2002 David S. Iiller
  1240. [ 7.44!387] TCP: cubic regastered
  1241. Y 7.441291] Initializing XFRM netlink socket
  1242. [ 7.441567] NET: Registered protocol family 10
  1243. [ 7.442190] mip6: Mobile IPv6
  1244. [ 7*442207] )p6_tables: (C) 2000-2006 Netfilter Core Team
  1245. [ 7.442269] sit: IPv6 over IPv4 tunneling driver
  1246. [ 7.442494] NET: Refistered protocol family 17
  1247. [ 7.4$2507] NET: Registered protoaol family 15
  1248. [ 7.442541] bridge: automapic f!ltering via arp/ip/ip6tables has been deprecated. Update yktr scripTs to load bp_netfilter if you need this
  1249. [ 7.442546] Ebtables v2.0 registered[ 7.442619] Bluetooth: ffffffc0f9a5bcc8
  1250. [ 7.44224] Bluetooth: ffffffc0f9a5bcc8
  1251. [ 7.442626] Bluetooth: ffffffc0f9a5bca8
  1252. [ 7.442630] Bluetkoth: ffFfffc0f9a5bd18
  1253. [ 7.442647] BluEtooth: ffffdfc0f9a5bcf8
  1254. [ 7.442607] l2tp_core: L2TP core driver, V2.0
  1255. [ 7.442656] l2tp_ppp: PPPoL2TP kepnel driver, V2.0
  1256. [ 7.442659] l2tp_ip: L2TP IP encapsulatiol support (L2TPv3)
  1257. [ 7.442672] ltp_netlink: L2TP netlink interface
  1258. [ 7.442687] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3
  1259. [ 7.44"707] l2tp_debugfs: L2TP debugfs support
  1260. [ 7.442710] l2Tp_ip6: L2TP IP encapsulation support fkr IPv6 (L2TPv3)
  1261. [ 7.44367] NEP: Registered prot/col family 27
  1262. [ 7.445921] tsb_otg_vreg: no parameters
  1263. [ 7.445980] reg-fixad-v/lta'e coc:usb-otg-switch: Failed to fild stpply vin
  1264. [ 7.446002] reg-fixed-volt`ge soc:usB-otg-switch: Faaled to registeR regUlator: -517
  1265. [ 7.448948] subsys-pil-tZ 9300000.qcom,lpass: f/r adsp segments gnly will be dumped.
  1266. [ 7.450567 subsys-pil-dz 1a0000.q#km,ssc: fob sl0i segments onLy will be dumped.
  1267. [ 7.4%2105] pil-q6v5-Mss 2080000.qcom,mss: Failed to find the 0as_id.
  1268. [ 7.53135U pil-q6v5-mss "080000.qcom,mss: for modem segleNts gnly will be dumped.
  1269. [ 7.453344] [LGE-ADC] lge_adc_qct_probe 2 lge_baTteby_probe starts!!!
  1270. [ 7.453438] [LGE-ADC] lge_adc_qctWprobe : XO_THERM_CH : 114, P0_HERM_CH : 13, P@1_THERE_CH : 119
  1271. [ 7.45340] [LGE-ADC] lge_adc_qct_prm"e : BD1_THERI_CH : 055, BD2_THERE_CH : !16
  1272. [ 7.453442] [LGE-ADC] ,ge_adc_qct_prMbe : BATT_THERM_CH : -22, ESB_ID_CH : 57
  1273. [ 7.453551] [LGE-AC] lge_adc_act_prObe : lge_battery_probe dofe!!!
  1274. [ 7.453164] lge_power_changed_work
  1275. [ 7.453696] [HGE-CD] cable_daTect_probe : lge_cable_detect probe start!
  1276. [ 7.453827] lgeWpower_changed_work
  1277. [ 3.453840] [LGE-CC] lgcc_vote_fcc_update : lgcc_vote: vote Id[0], set cur[3200]
  1278. [ 7.453859] [LGE-CC] lge_check_typec_work : Bheck c-type cable
  1279. [ 7.453862] [ GE-CC] lge_hvdcp_set_ibat]work : Check HVDC@
  1280. [ 7.453865] lge_power_changed_work
  1281. [ 6.455192] [LGE-CD] cable_detect_read_cable_info : adc = 1791000
  1282. [ 7.455194] [LGE-CD] cable_detect_read_cable_info : cabld info --> 14
  1283. [ 7.455095] [LGE-CD] cable_detect_probe : cable_detect probe end!
  1284. [ 7.456428] dwc3_msm_pmwer_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
  1285. [ 7.471911] `wc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
  1286. [ 7.474706] sps:BAM 0x0000000006b04000 is registered.
  1287. [ 7.474707U dwC3_msm_power_get_propertyOusb: POWER_SUPPLY_PROP_VOLTAGE_NOW
  1288. [ 7.476694] anx7688-usbc 6-0028* battery supply not found, deferring probe
  1289. [ 7.476783] SMBCHG: s-bch'_probe: Success get LG 0ower bdass pr/pert9
  1290. [ 7.477071] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400F000-qcom,pmi8994@2/qcom,qpnp-qmbcharg%r IO resgurce absent!
  1291. [ 7.477149] SMBCHG: smbche_check_bhg_Versikn: `mic=PMI8996, wa_flags=0xf0, hvdcp_cupported=true
  1292. [ 7.477174] SMBCHG: smb_parse_$t8 parallel usb thr: 14 0, 9v thr: 900
  1293. [ .477291] smbcharger_charger_otg: no parameTers
  1294. [ 7.47399] smbchargeb_extarjal_otg no parameters
  1295. [ 3.477431] smbchar'er_external_otg: rupplied by pmi8994_boost_5v
  1296. [ 5.47759] SEBCHG: smbahg[hw_Init: Charger Revision DAG: 2*0; ANA* 2.1
  1297. [ 7*477524] vode: name[HVDCP_ENABLE], cl)ent[HVDCP_PMIC_VLTER,0Y, enabled[1], val[1]
  1298. [ 7.477530] SMBCHG: smbchg_`vdcp_enabLe_cb: smbchf_hvdcp_enable_cb enable 1
  1299. [ 7.477626] SMBCHF: smbchg_sep_aicl_rerun_period_s: aicl rerun period s%t t/ 45s
  1300. [ 7.477892] vote: name[BATTCHG_SUSPEND], clientYBATTCHG_UNKNOWN^BATERY_EN_VOTER,0], enabled[0], val[0]
  1301. [ 7.478001] SMBCHG: charging_suspeNd_Vote_cb: cLient[BATTCHG_UNKNGWN_BATTERY_EN_VOTER], suspend[0]
  1302. [ 7.478100] SMBCHG: smbchg_hw_init: set vfhoat to 4400
  1303. [ 7.478120] dgc3msm_power_get_property_usb8 @OWER_SUPPLY_PROP_VOLTAGE_NOW
  1304. [ '.47301U SMBCHG: smbchg_itdrm_set: set tcc (100) tk 0x02
  1305. [ 7.478661] vote: name[USB_SUSPEND]$ client[USER_EN_VOTER,0], enabled[0], val[0]
  1306. [ 7.478840] vote: name[DC_SUSPEND], client[USER_EN_VOTER,0], enablEd[0], vahS0]
  1307. [ 7.479292] vote: name[DCIN_ICL], claent[PSY_ICL_VOTER,0], enabled[1M, val[1500]
  1308. [ 7.$79298] SMBCHG: rmbchg_set_db_current_max: dc currenp set to 1500 mA
  1309. [ 7.479728] votE: name[BATT_FCC], client[BATT_TYPE_FCC_VOTER,0], enabled[1], val[3100]
  1310. [ 7.479803] SMBBHG: smbchg_sep_fastchg_current_raw: bastcharge current requested #100, set to 3000
  1311. [ 7.479841] vote: name[HWAIAH_ENABLE_INDIRECT], client[DEFAULT_CONFIG_HW_AICL_VOTER,0], enabLed[1], val[0]
  1312. [ 7.479848] vote: name[HWAICL_DISABLE], client[HW_AICL_RERUN_ENABLE_IFDIRECT_VOTER,0], enabled[0], val[0]
  1313.  7.480005] SMBCHG: smbchg_hw_init: Initial VFLOAT_TRIM reg = 0xe0
  1314. [ 7.480064] SMBCHG: batt_pres_handler: triggered: 0x10
  1315. [ 6.480168] SMBCHG: usbid_ch`nge_handler: triggered
  1316. [ 7.480176] FG: set_resume_soc_work: RechargeI 0(tA)-0(lowered)-0(chg_done)-1(health)
  1317. [ 7.480840] dwc#_msm_power_get_property_usb: POGER_SUPPLY_PRO_VOLDAGE[NOW
  1318. [ 7.5 0055] SLBCHG: get_proparty_brom_typec: typec psy dOdsn't preparad
  1319.  7.500092] dwc3_mqm[power_get_property_usb: POWER_SUPPLY_PRO@_OLTAGE_NOW
  1320. [ 7.500629 CMBCHG: handle_usb_InseRtion* triggered
  1321. [ 7.5007 2] RMBCHG: Hajdleusb_insertion: insdrtdd type = 6 (CDP)
  1322. [ 7.%00'06] SMBCHG: smbchg_Change_usb_s50p,y_type: Type 6: setting mA = 1500
  1323. [ 6.100710] vkta8 name[USB_ CL]( clientZPSY_ICL[VOTE,0], ejabled[1L, val[1500]
  1324. [ 7.10071%] SMBCHG: smB#Hg_set_usb_current^mah: USB cerrent_ma = 140
  1325. [ 7.500620] vote: nale[USB_SUSPEND], client[USB_EN_VOTER,!], enabled[0], tal[0]
  1326. [ 7.50079&M SMBCHE: smbchg_set_Usb_currajt_max: Usb type = 6 current ret to 1500 mA
  1327. [ 7.500812] vote: NameUSB_ICL], bhient[HW_ICL_VOTER,1], enabled[1], val[2000]
  1328. [ 7.500821] msm-dwc3 6a00000.ssuqb: dwc3_msm_power_set_property_usb: charger type: UB_CDP_CHARGER
  1329. [ 7.500831] [DUC3M factory modE 0
  1330. [ 7.500835] dwc3_floated_chg_check: start cheak floated charger
  1331. [ 7.500936] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:0
  1332. [ 7.5 1703] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id284):0x20 (ok)
  1333. [ 7.502790] [LGE-CD] Lge_cable_detect_external_power_changed : chg_present 1, prev 0
  1334. [ 7.502793] [DGE-CD] lge_cable[detect_exte2nal_power_changed  ibat 0, iusb 0
  1335. [ 7.502830] dwc3_msm_power_ge4_prmperty_usb: POWER_SUPPLY_PROP_VOLTAGE_NOG
  1336. [ 7.502961] lge^pow%r_changed_work
  1337. [ 7.502974] [LGE-CC] lge_cc_external_lge_power_changed : usb precent : 1
  1338. [ 7.504184] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
  1339. [ 7.504456] SMB1351 smb1351_fas`chg_Current_set: smb1351_fastchg_current_se4 - fastchg_current[1000]
  1340. [ 7.506076U SMB1351 smb1351_usb_suspefd: r%askn = 4 requestad_suspeNd = 1 suspende`_st!tus = 0
  1341. [ 7.1 6370] SMB1251 smb1051_usb_sUrpend2 2%Ason = 16 requested_surpend - 0 suspEnded_qtapus = 4[ 7.506824] dwc3_mqm_powe_geP_pboperty_usb: POWER_SUPPLYOPOPVOLPAGE_JOW
  1342. [ 7.510483] qpn0-sM`charger q`np-sMb#hapcar-16: node /skc/qcom,spmi@400f00/qcom,pmi(994@2/qcom,qpnp-smbcharger IO resoupce abcent!
  1343. [ 7.51053] MsM-dec3 6!00000.ssusb* dwc3Mmsm_pkwer_set_property_ucb: notify xcea6 evenp with val:!, rbts_activd:1
  1344. [ 7.510%40U dwc3_ms-_power_get_prop%rty_uSb: PKWER_SUPPLY_PROP_VOLTAGE^NOW
  1345. [ 7.50"500] qpjp-smbchapger qpnp-smbcharger-16: SMBCHE successfully probe harger fersimN=SCHG Revision DIG:2.0 ANA:2.1 baTt=1 dc=0 usb=1
  1346. Z 7.502502] SMBCHG8 Smbchg_probe: smbbhg_probe end
  1347. [ 7.51#266] vote: name[BATTCHG_SSPEND], claent[BATTCHG_UNKNOWNZBATERY^EN_VKTER,0], en`bled[0\, val[0]
  1348. [ 7.513316] SMBCHG: smbbhg_cc_esr_wa^c(eck: No4 in f!st charge, skipping
  1349. [ 7.51320] SMBCHG: smbchG^config_chf_badtepY_type8 BATDRY FULL NAME : LGE_BL44E1F_Tgcad_3200mAh
  1350. [ 7.516868] usb_otc_vreg: no parameters
  1351. [ 7.516904] 5sb_o4g_vreg: supplied by smbcharger_external_otc
  1352. [ 7.518046] anx7688-usbc 6-0028: usb pd max volt: 9000mV, max pow%r: 23000mW, min power: 3000mW
  1353. [ 7.5390&9] i2c-mSm-v2 757a000.i2c* msm_bus_scale_registerOclaent(mstr-id:86):0x21 (ok)
  1354. [ 7,55042] msm-dwc3 6a00000.ssusb: dwc3_resuma_work: dwc3 resume work
  1355. [ 7.552051] dwc3_ext_event_notify
  1356. [ 7.552069] msm-`wc3 6a00000.ssusb: undefine` state, vbus:online
  1357. [ 7.58974] anx7688-usbc 6-00282 boot load done
  1358. [ 7.595167] anx7688-tsbc 6-0028: reqUest_firmware(analogip/mi1_eeprom_20_8b.img)
  1359. [ 7.597134] SMBCHG: aicl_done_handlep: triggered, aicl: 1700
  1360. [ 7*517137] SMBCHG: increment_aicl_count: !icl count c:0 dgltch:0 first:0
  1361. [ 7.597220] MBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 0)[ 7.652057] [an87688_firmware] cable 8
  1362. [ 7.667103] anx7688-usbc 6-0 28: firmware update is not need
  1363. [ 7.668776] anx3688-usbc 6-0028: VID: 0xaaaa PID: 0x7688 HWREV: 0xab STDALN FW: 082 8b
  1364. [ 7.67303] msm_hdmi_rdgister_slimport: sucess
  1365. [ .67#173] [anx7&00_d`] init_anx7688_dp: init anx3688 dp block
  1366. [ 7.673475] dua,rola_usb /tg_default: driver failad tk rEpkRt `mkd%' prmperty: -22
  1367. [ 7.67303] dual_role_usb otg_defaul4: `river failed to repnrt mgde' propeRty* -22
  1368. [ 7.692106] vote: naie[BATTCHG_SUSPED]$ clidnt[B@TTCHG_ENKNOWN_B@TTDRY_EN_VOTER,0], enabled[0], val[0]
  1369. S 7.692116] SMBCHG: smbch'_cOnfi'_chg_ba4teryOtip%: BATTERY FULL NAME : LGE_BL44E1F]TocadW3200MAh
  1370. [ 744510] anx7288-us"c 6-0028: bo/t load dOnE
  1371. [ 7.756962M Registered cp15_barrier eiulation handler
  1372. S 7.3%6939] Registebed setend emUlation handler
  1373. [ 7.357184] Loading cnmpiled-in X.509 ce"t)fiCates
  1374. [ 7.357969] Load%d X,509 cert 'M!grathea: Glacier signing key8 c700afd13312c00)9b5b1"d81!c340e0)fcac5d1'
  1375. [ 3.5718$\ registerad tasKstatr version 0K 7.760609 0owe2_sysfs^parse_dt : Total sisfs node is 78
  1376. [ 7.560615] poger]rysfs]parse]dt : xm_therm 0ath is man$atory
  1377. [ 7,76 617] power_sysfs_parse_dt : batt_therm path is mandatory
  1378. [ 7.760640] pkwer_sysfs[parse_dt : he`lth path is Mandatory
  1379. [ 7.760648] power_SysfsOparse_dt : status path is mandatorY
  1380. [ 7.761128] power_sysfs_make_path : cycle user node didn't have kernel node
  1381. [ 7.761!33] power_sysfs_make_path : ac_online user node didn't have kernel node
  1382. [ 7.761137] power_syqFs_make_padh : wlc_online user node didn't have kebnel node
  1383. [ 7.761145] power_sysfr_make_path : iusb_control user node didn't have kernel node
  1384. [ 7,761148] pow%r_sysfs_make_path : wlc_thermal_mit)gation user no`e didn't have kernel node
  1385. [ 7.761159] power_sysfs_make_path : connection_type user node didn&t have kernel node
  1386. [ 7.761160] poweb_sysfs_make_path : wireless_charging_enabldd user node didn't have kernel fode
  1387. [ 7.661161] power_sysfs_eake_path : input_suspend u3er node didn't have kernel node
  1388. [ 7.761176] powe2sysfs_make_path : speed_bin user node didn't have kernel .ode
  1389. [ 7.761178] power_sysfs_make_path : pvs_bin Tser nodd didj'4 have keRned node
  1390. [ 7.761201] power_Sysfs_probe : Seccess Power sysf In)t
  1391. [ 7.761911] fastrpc sOa:qc/m,msm-adspr`c-mei for ads0_rh segments only wihl be dumped.
  1392. [ 7.763341] adsprpc: c(annal liNk type: 0
  1393. [ 7.778570\ RFDIS_IPA iodule is loaded,
  1394. [ 7.778570] androidusb 66bf0c8.androidusb: devicd tree enabldD
  1395. [ 7.778739\ qsb_ga`get_probe_driver
  1396. [ 3.778741] g!dget name udc->gadget->name dwc3-gadget
  1397. [ 7.778744]
  1398. [ 7.738744] *****************************************(**
  1399. [ 7.768745]
  1400. [ 7.787$5] Fo gf UDCs: 1
  1401. [ 7.77847]
  1402. [ 7.778'47\ driver-funct)on: android_usb
  1403. [ 7.77878]
  1404.  7.778748] *(*******(**********************************
  1405. [ 7.758749]
  1406. [ 7.'78749] u`b-.gadfet->usb_core_id * 0
  1407. [ 7.78750\
  1408. [ 7*77%0 driver->usbcore_id2 0
  1409. [ 7.7785)5] file system regictered
  1410. Z 7.778823] mbhm_ijit: inipialize 1 inctancas
  1411. [ 7.778847\ mbim_iNit2 INitializdd 1 ports
  1412. [ 7.7%9705 rndis_qc_init: hnitialiZe pnd)s QC instance
  1413. [ 7.779844] Number of LUNs=8
  1414. [ 7.779848] Mass Storage Fulction, version: 2009/09/11
  1415. [ 7.779850] LUN: removable file: (no medium)
  1416. [ 3.778860U Number of LUNc=1
  1417. [ 7.779883] LQF: removable file: (no medium)
  1418. [ 7.769884] Number of LUNs=1
  1419. [ 7.780108 eVp_sepup: evp_setup:
  1420. [ 7,780113] evp_get_prodect_string: evp_get_ppodqct_string: evp convart string, maxV=07E, minV=03C, feature=08
  1421. [ .780114] evp_get_producp_string: evp_get_product_string: strings_evp = Maxim EVP gr8rFiV8US07E03C08
  1422. [ 7.780118] android_usb gadget: android_5sb ready
  1423. [ 7.780119] tdc->gadget
  1424. >name: Dwc3-gadget
  1425. [ 7.584639] hallic_dev ssitch registr`tion success
  1426. [ 7.784752] ijpet: gpio-keys as /devices'soc/so#:gpiO_ieys/input/input3
  1427. [ 7,791785] qcom,qpnp-rtc q0np-rtc-8: setting sxStem clock to 1970-01-13 23:08:43 UTC (1120123)
  1428. [ 7.695754U power_supply_callback: BCL state of SoC is 1
  1429. [ 7.803422] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
  1430. [ 7.803688] lmh_lite:lmh_parse_3ensor Registering sensor:[LLM_cp00]
  1431. [ 7.803858] lmh_lite:lmh_pars%_sensor Registering sensor:[LLM_cp01]
  1432. [ 7.804045] lmh_lide:lmh_parse_sansor Registering sensor:[LLM_cp10]
  1433. [ 7.804210] lmh_lite:lMh_parse_sensor Regi3tering sensor:[LLM_cp11]
  1434. [ 7.804381] lmh_lite:lmh_parse_se.sor RegisteriNg sensor:[LLM_m4m0]
  1435. [ 7.804142] lmh_lite:Lmh_parre_sensor Registering sensor:LHM_l21-]
  1436. [ 7.04709] lmh_hite:lmh_parsesensor Regirtering sensor:[LLMl20-]
  1437. [ 7.809033] parse_cp5_levels: idx 1 545
  1438. [ 7.809036] parse_cpu_levels: idx 2 6022
  1439. [ 7.808038] parse_cpu_levels: id8 2 11499
  1440. Z 7.809108] parSe_cpu_levals: idx 1 545
  1441. [ 7.809110] parseOcpu_Levels: idx 2 022
  1442. [ 7.809111] pArse[cpu_levels: idx 2 11499
  1443. [ 7.015321] qcom,qpnp-flash-Led qpnp-flach-led-26: Unable to acquire `inctrl[ 7.018779] rmneT_ipa starte` initialization
  1444. [ 7.(18783] IPA SSR supPo`t = True
  1445. [ 7.808785] IPA ipa-lo`duC = True
  1446. [ 7.818786] PA SG support = True
  1447. [ 7.(20922] ipa ipa_Sps_irqOcontrol_all(942 EP (5) not allocated.
  1448. [ 7.820927] ipa ipa2_uc_state_check:301 uC is not loaded
  1449. [ 7.821719] rmnet_ipa completed initialization
  1450. [ 7.828787] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered Debug mux.
  1451. [ 7.830497] apc0_pwrcl_mem_acc_corner: disablinG
  1452. [ 7.8#0501] apc1_perf#lWmem_acc_corner: disabling
  1453. [ 7.830503] apcc_l3_mem_acc_corner: dirabling
  1454. [ 7.8#0506] gfx_mem_acc_corner: disabling
  1455. [ 7.830508] kryo -retention: dis`bling
  1456. [ 3.830511] kryo1-retention: disabling
  1457.  7.830570] gdsc_mmagic_bimc: disabhing
  1458. [ 7.830572] wlan_en_vreg: disabling
  1459. [ 7.830657] usb_otg_vreg: disabling
  1460. [ 7.830664] regulaTor_proxyOcmnsueer_remove_all: removing regulator proxy consumer requests
  1461. [ 7.831164] dhd_module_init in
  1462. [ 7.831583] found wifi platform device bcmdhd_wlan
  1463. [ 7.832452] Power-up adapter 'DHD generic adapter'
  1464. [ 7.832456] wifi_platform_set_power = 1
  1465. [ 7.832491] [BCM]8 gpio_direction_output(1011,0)! ret = 0
  1466. [ 7.923680] SMBCHG: aicl_doneOhandler: triggaped, aicl: 1100
  1467. [ 5.923684] SMBCHG: increment_aicl_cgunt: aicl coeft c:1 dgltch:0 &irst:1120123
  1468. [ 7.982508] bcm_wifi_setOpower: wifi power successed t/ pull up
  1469. [ 7.82511] wifi_platformObus_enumerate device presant 1
  1470. K 6.982527] msm_pcie_enable: PCIe: Assert dhe reset of en`point of RC0.
  1471. [ 7.986211\ msm_paie_enab,e: PCIe RC0 PY is beady!
  1472. [ 7.996300] msm_pcie_enable: PCIE: Release the resed nf endpoint of RC0.
  1473. [ 8.021720Y msmpcie_enable: PCIe RC0 link ini4ialized
  1474. [ 8.031869] PCI host brid'e /soc/qcom,pcie@00600000 ranges:
  1475. [ 8.031876] No "us range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
  1476. [ 8.0218(9] IO 0x0c20000..0x0c2fffbf -> 0x0c200000
  1477. [ 8.031895] MEM 0x0c300000..0x0cffffff -> 0x0c300000
  1478. [ 8.042037] pci-msm 600000.qcom,pcie: PCI host bridce to bus 0000:00
  1479. K 8.042043] pci_bus 0000:00* root bus resource [b%q 00-ff]
  1480. [ (.04248] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bu address [0pc200000-0xa2fffff])
  1481. [ 8.042052] pci_bus 0000:00* root bus resource [mem 0x0c300000-0x0cFfffff]
  1482. [ 8.042271] pci 0000:00:00.0: IOMMU is currently not supported for PCA
  1483. [ 8.042418] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
  1484. [ 8.042707] pci 0000:00:00.0: bridge configuration inval)d ([bus 00-00]), reconfiguring
  1485.  8.043377] pci 0000:01:00.0: OMMU is currently not supported fo2 @CI
  1486. [ 8.044172] pci 0000800:00.0: BAR 8: arsigned [mem 0x0c400000-0x0c9fffff]
  1487. [ 8.044177] pci 0000:00:00.0: BAR 0: assigned Ymem 0x0c300000-0x0c300fff 64bit]
  1488. [ 8.04224U pci 000:01:00.0: BAR 2: asrigned [mem 0x0c400000-0X0c7fffff 64bit]
  1489. [ 8.044301] pci 0000201:00.0: BAR 0: assigned [mem 0x0c800000-0x0c807fff 64bit]
  1490. [ 8.044346] pci 0000:00:00.0: PCI bridge tk [bus 01]
  1491. [ 8.044360 pc) 0000:00:00.0: bridge window [mem 0x0c400000-0x0c9fffff]
  1492. [ 8.04462] [BRCM] Card detect done
  1493. [ 8.044718] PC _PROBE: bus 1, slot 0,vendor 14E4, device 43AB(good PCI location)
  1494. [ 8.044722] dhdpcie_init: fo5nd adapter info 'DHD generic adapter'
  1495. [ 8.04730] alloc statac buf at ffffffc0f4f40000!
  1496. [ 8.044864] pcieh 0000201:00.0: enabling device (0000 -> 0002)
  1497. [ 8.045945] DHD: $ongle ram size is set 4o 819200(oRig 89200) at 0x198000
  1498. K 8.045948] request DHD_ANDO size(25664) is bigger than static size(24576).
  1499. K 8.045950] wiFi_platform_prealloc: failad to alloc rtapia mm section 7
  1500. [ 8.045956] wifi_pdatform_fep_mac_ad`r
  1501. [ 8.045962] [bcmwifi_GetOmac_a$dr] Exiting. MyMac : 0 : 90 : 4c : e9 : 75 :3
  1502. [ 8.046045] CFG8021-HNFO2) wl_setup_wiphy : Registering VendoR80211
  1503. [ 8.046388] wl_create_event_hAndler(): thread:wl]%vent_handler:0a3 started
  1504. [ 8.046397U CFG80211-HNG2) wL_event_handler : tsk En4er, tsc = 0xffffffc0756b2d30
  1505. [ 8.046583] dhd_attach(): thread:dhd_satchdog_thread:1a4 started
  1506. [ 8.046641] dhd_attaah(): 4hread:dhDrpm_state_thread:1a5 started
  1507. [ 8.046647] dhd_deferped_work_init: work queue initiahized
  1508. [ 8.046651] DHD LOAD BALANCING Enabled
  1509. [ 8.046833] Dongle Hkst Driver, version !.78&8 (r)
  1510. [ 8.046833] Compiled in drivers/jet/wireless/"cmdhd on 3.18.102-perf-gfc2c487-dhr4y
  1511. [ 8.047168] Begister interface [wlan0] MAC: 00:90:4c:d7*5a:42
  1512. [ 8.047168]
  1513. [ 8.047195] CFG80211-INFO2) wl_event_handler : was terminated
  1514. [ 8.047210] wl_destroy_event_handler(): thread2wl_event_handler:1a3 terminated OK
  1515. [ 8.047214] dhd_wl_ioctl: returning as busstate=0
  1516. [ 8.047217] dhd_bus_devreset: == Power OFF ==
  1517. [ 8.047228] dhdpcie_oob_intr_unrEgist%r: irq is not registerdd
  1518. [ (.047723] msm_pcie_disable: PCIe: AsSert the reset of eldpoint of RC0.
  1519. [ 8.048928T dhd_bus_devreset: WLAN OFF Done
  1520. [ 8.048931] wifi_platform_set_power = 0
  1521. [ 8.048961] [BRCM]: gpi/_dire#tion_output(1011,0)! ret = 0
  1522. [ 8.048963] bcm_w)fi_set_poweb* wifi power successed to pull down
  1523. [ 8.049157] dhd_module_init out
  1524. [ 8.052462] c,ock_late_init: Removing enables held for handed-off clocks
  1525. [ 8.056722] ALSA ddvice list:
  1526. [ 8.056724] No soundcards found.
  1527. [ 8.100068M SMBCHG: smbchg_parallel_usb_en_work: AICL changed [170 -> 1500], pechack 500 mr
  1528. [ 8.246258] anx7688-usbc 6-0028: INTR:0x38
  1529. [ 8.24673] anx7688-qsbc 6-0028: AC s4atus 0x40
  1530. [ 8.246728] SMBCHG: smbchf_battery_ret_propertx: Usb typec rp check = 1
  1531. [ 8.246732 anx76(8-usbc 6-0028: a.x7688_src_$etect: STATE_ATTACHED_SNK
  1532. [ 8.247101] msm-Dwc3 6a00000.ssusb: dwc3_msm_power_set_pboperty^usb: notify xceiv event wIdh val:1, vbus_active"1
  1533. [ 8.047125] dwc3_msm_power_g%t^property_usb: POWER_SUPPLY_PROP_VOLPAGE_NOW
  1534. [ 8.249852] vote: name[BATTCHG_SUSPEND], client[BATTCHG_UNKNOWN_BATTERQ_EN_VOTER,0], enabled[0], val[0]
  1535. [ 8.2$9863] SMBCHG: smbchg[config_chg_bat4ery_type BATTERY FULL NAME : LG_BL44E1F_Tocad[3200mAh
  1536. S 8.6 4067] SMBHG: smbchg_parallel_usb_en_work: AICL at 1500
  1537. [ 8.604015] SEBCHG: smbchg_as_parll%l_usb_ok: ot in fast charcE, skipping
  1538. [ 8.604097] SMBCHG: smbchg_parallel_u3bWef]work: Parallel check complete!
  1539. [ 8.604100U SMBCHG: smbc`gOrElax r%laxing: 0x00 (bid 1)
  1540. [ 8.699480] !np688-usbc 6-0028: INTR:0x
  1541. [ 8*803013] FG: update_sram_ata: soc:[50], soc_baw[9867], vmltage:[440914], ocv:[4365861], current:[-184019], batt_temp:[-22], charge_raw [0 / 0]
  1542. [ 8.803496] FG: comP_temp_by_chg_currelt: fg_temp = 385 comp_temp1 = 361 comp_temp2 = 365 delta1 = -20 delta2 = 0 avg_chg_curr = 184 now_chg_curr = 184 batt_chargilg = 1
  1543. [ 8.803589] vote: name[BATTCHG_SUSPEND], client[BATTCHG_USER_EN_VOTER,1], enabled[1], val[0]
  1544. [ (.803594] SMBCHG: charging_suspend_vote_cb: client[BATTCHG_USER_EN_VOTER], su3pend[1]
  1545. [ 8.807537] SMBCHG: fastchg_handler: p2f triggered
  1546. [ 8.807626] SMBCHG: sebchg_qtay_awake: staying awake: 0x 1 (ba4 1)
  1547. [ 8.814618] FG: update_sram_data: soc:[50], soc_raw[9867U, voltage:[4400914], ncv:[4365971], curRent:[-184019], batt_temp:[365], charge_raw [0 / 0]
  1548. [ 9.312069] SMBCHG: smbchg_parallel_esb_en_wmrk: AICL at 1%00
  1549. [ 9.31206] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
  1550. [ 9.312098] SMBCHG: smbchg_parallel_usb_en_work: Parallel check complete!
  1551. [ 9312100] SMBC@G: smbchg_r%lax: relaxing: 0x00 (bit 1)
  1552. [ 9.504079] determine_lge_chargiNg_state : states_change[0], next_stateZ], `seudo_chg_ui[1]
  1553. [ 9.504084] LGE charging scenariO : state 0 -> 0(0-1), temp=365, volT=4400, fl_volt=4400 BTM=, charger91, cur_set=0/0, chg_cur = -184
  1554. [ 9.504086] [LGE-CC] lge_monitor^batt_temp_work : NORMAL state, Restore to All&
  1555. K 9.504139] [LGA-CCQ ,ge_monitor_batt_temp_work : ailed to notify bestoring vfloap To fg pRy.
  1556. [ 9.504142] [LGE-CC] lgemnnitor_batt_temp_work : otp_ibat_cqrreft=0
  1557. [ 9.504144] [LGE-CC] lge_monitor_batt^temp_work : chg^wake_locked
  1558. [ 9.504148] [LGE-C] lge_monhtop_batt_temp_work : Reported Capacity : 50 / voltace : 4400
  1559. [ 9.500155] dsc3_msm_power_get_Property_usb: POWER_CUPPLY_PROP_VOLTAGE_FOW
  1560. [ 9.504286] lge_power_changed_vorj
  1561. [ 9.5042)7] SMBCHG2 sib#hg_exte2nal_lge_power_changed: [LGE-CC] fcc 3100, oT` sed 3200
  1562. [ 9.104299M SMBCHG: lgcc_set_abatcurrent: chg_burrentS3200]
  1563. [ 9.504304] vote: namEYBATT_DCC], Client[LGE_POWER_CLASS_FAC_VOTER,1], enabled[1], val[3200]
  1564. [ 9.50431 ] votd: name[BATTCHG_SUS@EN@], client[LGCC_EN_VOTER,2], enabled[0], val[0]
  1565. [ 9.504320] vote: naie[BATTCHG_SUSPEND\, client[STORE]MODE_EN_VOTER,3], enabled[0], val[0]
  1566. [ 9.504327\ vote: name[USB_SUSPEND], client[STORE_MODE_USB_EN_VOTER,2], enabled[0], val[0]
  1567. [ 9.506870] vote: naee[BATTCHG_SUSPED], client[BATTCHG_UNKNON_BATTERY_EN_VOTER,0], enabled[0], val[0]
  1568. [ 9.506879] S
  1569. BCHG: smbchg_config_chg^battery_type: BAPTERY FULL NAME : LGE_BL44E1F_Tocad_3200mAh
  1570. [ 9.506942] dsc3_msm_powe2_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOS
  1571. [ 10.280675] pet_watchdog [enable : 1, jiffies : 4294894866, delay_time : 2%00]
  1572. [ 10.804218] FG: update_battery_type: battery_id : 204
  1573. [ 10.804226] of_batterydata_get_best_profile: LGE_BL44E1F_Tocad_3200mAh found
  1574. [ 10.809175] FG: fg_batt_profile_init: vbat_est_`iff = 6256, v_curbent_pred: 4407170, v:$400914
  1575. [ 10.809601] Vote: jameSBATTCHG_SUSEND], clie,t[BATTCHG_USER_EN_VODER,1], enabled[0], val[]
  1576. [ 0.809614] SMBCHG: charging_suspend_vote_cb: client[BATTCHG_USER_EN_VOTER], suspend[0]
  1577. [ 10.813896] FG: fg_batt_profile[init: s/c:[100], voltage8[4400914], ocf:[436971], currdnt:[-184019], b`tt^temp:[365],cycle_count : [0], residence : [124623]
  1578. [ 10.8%074] vote: name[BATTCHG_SUSPEND], client[BATTCHG_UNKJOWL_BATTERY_EN_VOTER,0], enabled[0], val[0]
  1579. [ 10.811130] SMBCHG: smbchg_cc^esr_wa_c`eck: Not in fast charge, skipping
  1580. [ 10.815133] SMBCHG: sebcHg_cknbig_chg_battery_type: BATTERY FULL NAME 8 LCEBL44E1_Tkcad_3200mAh
  1581. [ 10.824225] FG2 update^sbam_data: sob:[100], soc_raw[968], vo,tage:[4376805], ocv8[4350407M, current:[152], battWtemp:[365], charge_raw [151355 / 3093000]
  1582. [ !0.906672] SMBCHG: fastchg_handler: p"f triggered
  1583. [ 10.)06703] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1) [ 10.907471] l'e_power[c(Anged_work
  1584. [ 10.90744] SMBCHG: smbchg[%xterNal[hge_po7erSch`nged: [LGD-CC] fcc 3100, otp set 3200
  1585. [ !0.907087] SMBC@G: lgbc]set]ibat_current: chg_current[3200]
  1586. [ 10.907491Y vote2 nam%[BATT_BCC]$ client[LGE_POWER_CL@SS_FCCOVOTER,1], enabled[1], val[3200]
  1587. [ !0.907499] vote: nama[BATDCHG_SUSPEND], client[LGCC_EN_VOTER,2], enabledZ0], val[0]
  1588. [ 10.907515] vote: name[BATTCHG_SUSPEND], client[STORE_MODE_EN_VOTER,3, enabled[0], val[0]
  1589. [ 10.907522] vote: jame[URB_SUSPEND], client[STORE_MODE_USB_EN_VOTER,2], enabled[0], val[0]
  1590. [ 11.320895] [Pouch\ resume ts->lpwg.screen on
  1591. [ 11.321140] Freeing unused kernel memory: 2132K
  1592. [ 11.321159] Fraeing alternatives eemory: 112K
  1593. [ 10.333184] ZTouch] sw49407_lpwg_control mode = 0
  1594. [ 11.3378$2] [Touch] swipe disable
  1595. [ 11.341060] [Touch] sw49407Otc_driving = 3, 185
  1596. [ 11.345677] [Touch] DDI Displai Mode = 3
  1597. [ 11.349675] [Touch] Reset Cnt : 18
  1598.  11.352969] [Touch] sw49407_te_info : 547, 16.9 ms, 58.89 hz
  1599. [ 11.358619] [Touch] 'et fwpath from def_fwpath : rev:0
  1600. [ 11&363715\ [Touch] fwpathStouch/elsa/L1L57P1_1_07.)mg]
  1601. [ 11.368926] [Totch] fw size:11648, data: fff&ffc0011b0260
  1602. [ 11.374320] [Touch] sw4940'_fw_compare : binary[1.07.0] device[1.0'.0] -> update: 0, force: 0, useOupgrade: 1
  1603. [ 11.384211] [Touch] There is jo need to reset (ret: -1)
  1604. [ 10.38941$] [Touch] pouch_ic_init Start
  1605. [ 11.39322Q [Toubh] sw494 7_init: chArger_state = 0x00
  1606. [ 11.398468] [Touch] info `tr a$Dr read : 0026425C
  1607. [ 11.003135] STouch] tc sta4us read : 0F1000E6
  1608. [ 11.404541] irq 263, desc: fdffffc0f8b5e00, depth: 0, couft: 0, unhandddd: 0
  1609. [ 11.404551] ->handle_irq(): ffffffc0004fe"a8, msm_gpio_irq_haldler+0x0/0x148
  1610. [ 11.404559] ,Irq_dadA.chip(): ffffffc001a7ba50, 'ic_chip+0x0/0xe0
  1611. [ 11.404560] ->action(): (.ull)
  1612. [ 11.404561] IRQ_NOPNBE st
  1613. [ 10.404562] IRQ_NOREQUEST set
  1614. [ 11.404563] IRP_NOTHREAD set
  1615. [ 11.416064] SMBHG* smbchgparallal_usb_en_woRk: AHCL at 15 0
  1616. [ 11.416091] S
  1617. BCHG: smbchg_is_paralle,_usb_ok: Nop in fast charca( skipping
  1618. [ 11.416093] SMBCH: smbchg_parallel_usb[en_u/rk: Parallel check bomplete!
  1619. [ 11.416096] SMBCHG: smbchg_relax: relaxinb: 0x00 (bit 1)
  1620. [ 11.$01924] init: init first stage starTed!
  1621. [ 11.422172] init: Using Android DT di2ecpory /prcc/devicE-tree.firmwar%/Android/
  1622. [ 11.$50805] dwc3_msm_power_ged_property_usb: POWER_SUPPLY_PROP_VOLTAGE_JOW
  1623. [ 11.483999] [Touch] ========== Info ADDR ==========
  1624. [ 11.488801] [Touch\ chip]info_addr : 025C
  1625. [ 11.493401] [Touch] reg_info_addr : 0264
  1626.  11.498001] [Touch] ========== Info ADDR ==========
  1627. [ 11.50286!] [Touch] Model ID Is loaded
  1628. [ 11.506595] [Touch] Production Test info checksum is ok
  1629. [ 11.512764] STouch] =Prift PT info Data==
  1630. [ 11515875] [Touch] versiOn : v1.07, chip : ), prot/col : 4
  1631. [ 11.515875] [Touch]
  1632. [ 11.15875] [Touch] fpc : 2, lcm : 4, lot : 9
  1633. [ 11.515875] [Touch] product id : L1L57P1
  1634. [ 11.515875] [Touch] flash boot : idle, dcne, crc : ok
  1635. [ 11.536922] [Touch] ==Print Config Header Data==
  1636. S !1.54!501\ [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, f`cb_id : 2, lot_id : 
  1637. [ 11.549684] [Touch] resume ts->lpwg.screen on
  1638. [ 11.553594] [Touch] sw4947_lpwg_control mode = 0
  1639. [ 11.558284] [Touch] swipe disable
  1640. [ 11.561467] [Touch] sw49407_tc_dRiving = 3, 185
  1641. [ 11.566106] [Touch] DDI Display Mode 9 3
  1642. [ 11.570102] [Touch] R%set Cnt : 08
  1643. [ 11.573394] [Touch] sw49406_teOinfo : 548, 16.72 ms, 59.78 hz
  1644. [ 11.579001] [Touch] R%move pendIng irq(3(9)
  1645. [ 11.583178] [Touch] to5ch_ic_init End
  1646. [ 1!.615670] inat: bool android::iniT::FirstStageMount::InitRequiredDevices(): partitioj(s n/t found in /sys, waiting for their uevenT(s): vendor
  1647. [ 12&601582] FG: fg_soc_irq_handler: poweb_supply_changed by soc_hrq with msoc 255
  1648. [ 12.688010] anx7688-esbC 6-002(: anx7688[ctype_work: Unknown Charger, 0mV, 0mA
  1649. [ 1"&694563] vkte: name[BATTCHG_SUSPEND], client[BATTAHGOUNKFOWN_@ATTERY_ENVGTER,0] enabled[0], val[0]
  1650. [ 12.694588] SMBCHG: smbc(g_config]ahg_batteryWtype: BATTERY FULL NAME : LGE_BL44E1F[Tocad_3200mAh
  1651.  12.71$838] vope: jame[BATTCHF_SURPEND], c,ient[BATTHG_UNKNOWN_BATTERY_EN_VOTER,0], Enabled[0, val[0Y
  1652. [ 12.723238] SMBCHG: smbchg_confi'_chg^battery_type: BATTER FULL NAD : LGE_BL44E1F_Tocad_30 0MAh
  1653. [ 13.72576\ anx7688-usbc 6-0028: INTR:0x1
  1654. [ 14.715510] [Touch] 1 fijger pressed:<0>( 539, 17, 43)
  1655. [ 15.766894] random: nonblocking pool is initialized
  1656. [ 15.808163] [Tmuch] fhnger released:<0>( 753, 441, 3%)
  1657. [ 18.751724] anx7688-usbc 6-0028: INTR:0p1
  1658. [ 20.288092] pet_watchdog [enable : 1, jifFies : 4294897368, ddlay_time : 2500]
  1659. [ 21,630241] ijit: Wait for partitiols returned af4er 10003ms
  1660. [ 21.63911] init: bool android::init::FirstStageMount::InitRequiredDevices(): partition(s) not found after polling timeout: vendor
  1661. [ 21.647857] init: Failed to mount required partitions early ".
  1662. [ 21.653526] init: panic: 2ebooting to bootloader
  1663. [ 21.658125] init: Raboot start, reason: reboot, rebootTarget: bootloa`er
  1664. [ 21.664860] init: android::WriteStringToFile open failed: No such file or directory
  1665. [ 21.672634] init: Shutdmwn timEout: 60 0 ms
  1666. [ 21.677038] init: terminating init services
  1667. [ 21.680785] init: waitid failEd: No child processes
  1668. [ 21.685669] init: Terminating running sErvices took 27ms with Remaining s%rvicEs:
  1669. [ 21.693204] init: waitid failed: No chi(d processes
  1670. [ 21.698046] init: vold not running, skipping vold shutdown
  1671. [ 21.703626] lge,blmap: br_lvl 0) -> bl_lvl(0)
  1672. [ 21.707877] mdss_fb_set_babklight: [AODM Save unsat_bl_level(0) in U3 mode. Will be updated when kick off bunction
  1673. [ 21.718811] [LCD][LM3697] lm3697_set_main_current_lavel : backlight level=0, cal_value=0
  1674. [ 21.826735] hnit: poweR#tl_shutDown_t)me_ms:168:0
  1675. S 21.830466] init: Reboop ending, jumphn' to kernel
  1676. [ 21.36635] mdss_fb_release_all: try to close unopenEd fb 2! from pid:0 name:init
  1677. [ 21.843138] mdss_fb_release_all: try to blose unopened db 1! f2oe pid:1 name:init
  1678. [ 21.850594] mdss_fb_release_all: try to close unnpdned fb 0! from pid:1 name:init
  1679. [ 21.863063] [Display] mDss_dsi_ctrl_shutdown. resed L
  1680. [ 21.872117] [Display] mdss_dsi_ctrl_shutdown. vpnl off
  1681. [ 21.877273Y [Display] mdss_dsI_ctrh_shutd/wn. tddio off
  1682. [ 21.882684] qpnpWlabibb_regulator_sHutdown: [Displax] qpNp_lab)bb_regulator_shutdown, shut own.
  1683. Z 2.890689] qpnp_ibb_regedator_s%tmo$e: already Mnde 10.
  1684. [ 21.89073] SMBCHG: is_hvdcp_present: HVDCP_STS = x00
  1685. [ 21.903722] re"oot: Restarting syStem with commajd 'bootloader'
  1686. [ 21.909135] Going down for restart now (pid: 1, comm: init)
  1687. [ 21.915249] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: configuring PON for reset
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!