SHARE
TWEET

Orange Pi Zero boot log

a guest Nov 8th, 2016 397 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot SPL 2016.09 (Oct 31 2016 - 11:49:45)
  2. DRAM: 512 MiB
  3. Failed to set core voltage! Can't set CPU frequency
  4. Trying to boot from MMC1
  5.  
  6.  
  7. U-Boot 2016.09 (Oct 31 2016 - 11:49:45 +0800) Allwinner Technology
  8.  
  9. CPU:   Allwinner H3 (SUN8I 1680)
  10. Model: Xunlong Orange Pi PC
  11. I2C:   ready
  12. DRAM:  512 MiB
  13. MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
  14. *** Warning - bad CRC, using default environment
  15.  
  16. In:    serial
  17. Out:   serial
  18. Err:   serial
  19. Net:   phy interface0
  20. eth0: ethernet@1c30000
  21. Hit any key to stop autoboot:  0
  22. switch to partitions #0, OK
  23. mmc0 is current device
  24. Scanning mmc 0:1...
  25. Found U-Boot script /boot.scr
  26. reading /boot.scr
  27. 538 bytes read in 19 ms (27.3 KiB/s)
  28. ## Executing script at 43100000
  29. gpio: pin PA17 (gpio 17) value is 1
  30. reading script.bin
  31. 34864 bytes read in 31 ms (1.1 MiB/s)
  32. reading uImage
  33. 4678576 bytes read in 417 ms (10.7 MiB/s)
  34. ## Booting kernel from Legacy Image at 48000000 ...
  35.    Image Name:   Linux-3.4.39
  36.    Image Type:   ARM Linux Kernel Image (uncompressed)
  37.    Data Size:    4678512 Bytes = 4.5 MiB
  38.    Load Address: 40008000
  39.    Entry Point:  40008000
  40.    Verifying Checksum ... OK
  41.    Loading Kernel Image ... OK
  42. Using machid 0x1029 from environment
  43.  
  44. Starting kernel ...
  45.  
  46. [sun8i_fixup]: From boot, get meminfo:
  47.         Start:  0x40000000
  48.         Size:   512MB
  49. ion_carveout reserve: 160m@0 300m@0 130m@1 200m@1
  50. ion_reserve_select: ion chipid  [0x2004620!
  51. ion_reserve_common: ion reserve: [0x56000000, 0x60000000]!
  52. [    0.000000] Booting Linux on physical CPU 0
  53. [    0.000000] Initializing cgroup subsys cpu
  54. [    0.000000] Linux version 3.4.39 (orange@orange-All-Series) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #35 SMP PREEMPT Mon 6
  55. [    0.000000] cma: CMA: reserved 160 MiB at 56000000
  56. [    0.000000] PERCPU: Embedded 8 pages/cpu @c101a000 s11264 r8192 d13312 u32768
  57. [    0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 init=/sbin/init rootwait rootfstype=ext4 panic=10 consoleblank=0 enforcing=0 loglevel=7
  58. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  59. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  60. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  61. [    0.000000] Memory: 512MB = 512MB total
  62. [    0.000000] Memory: 342948k/342948k available, 181340k reserved, 0K highmem
  63. [    0.000000] Virtual kernel memory layout:
  64. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  65. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  66. [    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
  67. [    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
  68. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  69. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  70. [    0.000000]       .text : 0xc0008000 - 0xc08e6014   (9081 kB)
  71. [    0.000000]       .init : 0xc08e7000 - 0xc0938c00   ( 327 kB)
  72. [    0.000000]       .data : 0xc093a000 - 0xc09b3e10   ( 488 kB)
  73. [    0.000000]        .bss : 0xc09b45c4 - 0xc0b878f0   (1869 kB)
  74. [    0.000000] Preemptible hierarchical RCU implementation.
  75. [    0.000000]  Additional per-CPU info printed with stalls.
  76. [    0.000000] NR_IRQS:544
  77. [    0.000000] Architected local timer running at 24.00MHz.
  78. [    0.000000] Switching to timer-based delay loop
  79. [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  80. [    0.000000] Console: colour dummy device 80x30
  81. [    0.000000] console [tty1] enabled
  82. [    0.002383] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  83. [    0.002555] pid_max: default: 32768 minimum: 301
  84. [    0.003593] Mount-cache hash table entries: 512
  85. [    0.006148] Initializing cgroup subsys debug
  86. [    0.006240] Initializing cgroup subsys cpuacct
  87. [    0.006316] Initializing cgroup subsys freezer
  88. [    0.006457] CPU: Testing write buffer coherency: ok
  89. [    0.006628] ftrace: allocating 23912 entries in 71 pages
  90. [    0.080529] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  91. [    0.080627] [sunxi_smp_prepare_cpus] enter
  92. [    0.080740] Setting up static identity map for 0x40649b78 - 0x40649bd0
  93. [    0.083041] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  94. [    0.083211] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  95. [    0.091124] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  96. [    0.100286] Brought up 4 CPUs
  97. [    0.100477] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  98. [    0.101886] devtmpfs: initialized
  99. [    0.113402] wakeup src cnt is : 1.
  100. [    0.113558] sunxi pm init
  101. [    0.114566] pinctrl core: initialized pinctrl subsystem
  102. [    0.125015] NET: Registered protocol family 16
  103. [    0.126798] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  104. [    0.126798] script_sysfs_init success
  105. [    0.126798] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  106. [    0.128726] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  107. [    0.130723] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  108. [    0.130821] hw-breakpoint: maximum watchpoint size is 8 bytes.
  109. [    0.131648] script config pll_video to 297 Mhz
  110. [    0.131724] script config pll_de to 864 Mhz
  111. [    0.131828] script config pll_ve to 402 Mhz
  112. [    0.150696] bio: create slab <bio-0> at 0
  113. [    0.151178] [ARISC] :sunxi-arisc driver v1.04
  114. [    0.174514] [ARISC] :arisc version: [v0.1.58.3]
  115. [    0.251916] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
  116. [    0.261227] SCSI subsystem initialized
  117. [    0.261787] usbcore: registered new interface driver usbfs
  118. [    0.262035] usbcore: registered new interface driver hub
  119. [    0.262161] usbcore: registered new device driver usb
  120. [    0.262161] twi_chan_cfg()340 - [twi0] has no twi_regulator.
  121. [    0.262161] twi_chan_cfg()340 - [twi1] has no twi_regulator.
  122. [    0.262161] twi_chan_cfg()340 - [twi2] has no twi_regulator.
  123. [    0.262161] Linux video capture interface: v2.00
  124. [    0.262161] Advanced Linux Sound Architecture Driver Version 1.0.25.
  125. [    0.262844] Bluetooth: Core ver 2.16
  126. [    0.262975] NET: Registered protocol family 31
  127. [    0.263035] Bluetooth: HCI device and connection manager initialized
  128. [    0.263108] Bluetooth: HCI socket layer initialized
  129. [    0.263169] Bluetooth: L2CAP socket layer initialized
  130. [    0.263291] Bluetooth: SCO socket layer initialized
  131. [    0.263921] cfg80211: Calling CRDA to update world regulatory domain
  132. [    0.264116] Switching to clocksource arch_sys_counter
  133. [    0.320929] FS-Cache: Loaded
  134. [    0.321575] CacheFiles: Loaded
  135. [    0.352044] NET: Registered protocol family 2
  136. [    0.352806] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  137. [    0.354312] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  138. [    0.355021] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  139. [    0.355669] TCP: Hash tables configured (established 16384 bind 16384)
  140. [    0.355740] TCP: reno registered
  141. [    0.355798] UDP hash table entries: 256 (order: 1, 8192 bytes)
  142. [    0.355902] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  143. [    0.356722] NET: Registered protocol family 1
  144. [    0.357724] RPC: Registered named UNIX socket transport module.
  145. [    0.357801] RPC: Registered udp transport module.
  146. [    0.357857] RPC: Registered tcp transport module.
  147. [    0.357912] RPC: Registered tcp NFSv4.1 backchannel transport module.
  148. [    0.359190] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  149. [    0.359506] sunxi_reg_init enter
  150. [    0.361488] audit: initializing netlink socket (disabled)
  151. [    0.361637] type=2000 audit(0.360:1): initialized
  152. <6[    0.369454] fuse init (API version 7.18)
  153. [    0.370778] msgmni has been set to 893
  154. [    0.374459] io scheduler noop registered
  155. [    0.374527] io scheduler deadline registered
  156. [    0.374833] io scheduler cfq registered (default)
  157. [    0.375674] [DISP]disp_module_init
  158. [    0.376575] cmdline,init_disp=
  159. [    0.377114] cmdline,disp=
  160. [    0.396627] [DISP] Fb_map_kernel_logo,line:989:Fb_map_kernel_logo failed!sel=0, output_type=4, lcd_reg=0, hdmi_reg=0
  161. [    0.401709] [DISP]disp_module_init finish
  162. [    0.402255] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
  163. [    0.402342] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.
  164. [    0.402420] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
  165. [    0.403591] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  166. [    0.403673] sw_uart_pm()890 - uart0 clk is already enable
  167. [    0.403753] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  168. [    0.515330] console [ttyS0] enabled
  169. [    1.017911] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  170. [    1.121855] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  171. [    1.130596] sunxi_di_init get di_by_pass err!
  172. [    1.147332] loop: module loaded
  173. [    1.151016] Get boot type cmd line fail
  174. [    1.156416] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
  175. [    1.163638] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator.
  176. [    1.170881] tun: Universal TUN/TAP device driver, 1.6
  177. [    1.176561] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  178. [    1.185742] PPP generic driver version 2.4.2
  179. [    1.191060] PPP BSD Compression module registered
  180. [    1.196356] PPP Deflate Compression module registered
  181. [    1.203926] PPP MPPE Compression module registered
  182. [    1.209336] NET: Registered protocol family 24
  183. [    1.214441] PPTP driver version 0.8.5
  184. [    1.219069] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  185. [    1.246688] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  186. [    1.255782] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  187. [    1.265665] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  188. [    1.290086] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  189. [    1.298295] hub 1-0:1.0: USB hub found
  190. [    1.302610] hub 1-0:1.0: 1 port detected
  191. [    1.328057] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  192. [    1.337146] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
  193. [    1.346885] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
  194. [    1.370085] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
  195. [    1.378234] hub 2-0:1.0: USB hub found
  196. [    1.382553] hub 2-0:1.0: 1 port detected
  197. [    1.407997] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  198. [    1.417092] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
  199. [    1.426903] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000
  200. [    1.450085] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
  201. [    1.458142] hub 3-0:1.0: USB hub found
  202. [    1.462445] hub 3-0:1.0: 1 port detected
  203. [    1.487922] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  204. [    1.497018] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4
  205. [    1.506725] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
  206. [    1.530082] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
  207. [    1.538226] hub 4-0:1.0: USB hub found
  208. [    1.542528] hub 4-0:1.0: 1 port detected
  209. [    1.547822] sunxi-ehci sunxi-ehci.4: remove, state 1
  210. [    1.553529] usb usb4: USB disconnect, device number 1
  211. [    1.561544] sunxi-ehci sunxi-ehci.4: USB bus 4 deregistered
  212. [    1.577975] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  213. [    1.605095] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  214. [    1.613789] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 4
  215. [    1.622402] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  216. [    1.685530] hub 4-0:1.0: USB hub found
  217. [    1.689784] hub 4-0:1.0: 1 port detected
  218. [    1.715134] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  219. [    1.723827] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 5
  220. [    1.732438] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
  221. [    1.795467] hub 5-0:1.0: USB hub found
  222. [    1.799722] hub 5-0:1.0: 1 port detected
  223. [    1.825158] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
  224. [    1.833855] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 6
  225. [    1.842481] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400
  226. [    1.905449] hub 6-0:1.0: USB hub found
  227. [    1.909702] hub 6-0:1.0: 1 port detected
  228. [    1.915122] Initializing USB Mass Storage driver...
  229. [    1.921104] usbcore: registered new interface driver usb-storage
  230. [    1.927928] USB Mass Storage support registered.
  231. [    1.933298] usbcore: registered new interface driver ums-alauda
  232. [    1.940157] usbcore: registered new interface driver ums-cypress
  233. [    1.947069] usbcore: registered new interface driver ums-datafab
  234. [    1.954046] usbcore: registered new interface driver ums_eneub6250
  235. [    1.961195] usbcore: registered new interface driver ums-freecom
  236. [    1.968103] usbcore: registered new interface driver ums-isd200
  237. [    1.974983] usbcore: registered new interface driver ums-jumpshot
  238. [    1.982037] usbcore: registered new interface driver ums-karma
  239. [    1.988747] usbcore: registered new interface driver ums-onetouch
  240. [    1.995855] usbcore: registered new interface driver ums-realtek
  241. [    2.002830] usbcore: registered new interface driver ums-sddr09
  242. [    2.009654] usbcore: registered new interface driver ums-sddr55
  243. [    2.016641] usbcore: registered new interface driver ums-usbat
  244. [    2.023591] usbcore: registered new interface driver usbserial
  245. [    2.030211] usbserial: USB Serial Driver core
  246. [    2.035238] usbcore: registered new interface driver option
  247. [    2.041852] USB Serial support registered for GSM modem (1-port)
  248. [    2.050076] file system registered
  249. [    2.058349] android_usb gadget: Mass Storage Function, version: 2009/09/11
  250. [    2.066302] android_usb gadget: Number of LUNs=3
  251. [    2.071587]  lun0: LUN: removable file: (no medium)
  252. [    2.077113]  lun1: LUN: removable file: (no medium)
  253. [    2.082681]  lun2: LUN: removable file: (no medium)
  254. [    2.089134] android_usb gadget: android_usb ready
  255. [    2.096521] mousedev: PS/2 mouse device common for all mice
  256. [    2.103493] ls_fetch_sysconfig_para: type err  device_used = 0.
  257. [    2.110304] =========script_get_err============
  258. [    2.116123] [RTC] WARNING: Rtc time will be wrong!!
  259. [    2.121693] [RTC] WARNING: use *internal OSC* as clock source
  260. [    2.128867] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
  261. [    2.136693] IR RC5(x) protocol handler initialized
  262. [    2.142507] tscdev_init: tsc driver is disabled
  263. [    2.148552] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
  264. [    2.156053] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
  265. [    2.167617] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
  266. [    2.175301] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
  267. [    2.181619] timeout_to_interv, line 167
  268. [    2.185940] interv_to_timeout, line 189
  269. [    2.190307] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
  270. [    2.200750] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  271. [    2.211189] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
  272. [    2.232711] usbcore: registered new interface driver usbhid
  273. [    2.238990] usbhid: USB HID core driver
  274. [    2.243892] ashmem: initialized
  275. [    2.247539] logger: created 256K log 'log_main'
  276. [    2.252746] logger: created 256K log 'log_events'
  277. [    2.258118] logger: created 256K log 'log_radio'
  278. [    2.263415] logger: created 256K log 'log_system'
  279. [    2.269080] sunxi_oops: heming add OOPS_INFO_ADDR = -20
  280. [    2.279533] asoc: sndcodec <-> sunxi-codec mapping ok
  281. [    2.290400] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  282. [    2.297673] pktgen: Packet Generator for packet performance testing. Version: 2.74
  283. [    2.306652] u32 classifier
  284. [    2.309668]     Actions configured
  285. [    2.313476] Netfilter messages via NETLINK v0.30.
  286. [    2.318793] nf_conntrack version 0.5.0 (7150 buckets, 28600 max)
  287. [    2.325974] ctnetlink v0.93: registering with nfnetlink.
  288. [    2.331963] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  289. [    2.339706] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  290. [    2.346576] xt_time: kernel timezone is -0000
  291. [    2.351632] IPv4 over IPv4 tunneling driver
  292. [    2.356813] gre: GRE over IPv4 demultiplexor driver
  293. [    2.362273] ip_gre: GRE over IPv4 tunneling driver
  294. [    2.368315] ip_tables: (C) 2000-2006 Netfilter Core Team
  295. [    2.374490] arp_tables: (C) 2002 David S. Miller
  296. [    2.379698] TCP: cubic registered
  297. [    2.383451] Initializing XFRM netlink socket
  298. [    2.388589] NET: Registered protocol family 10
  299. [    2.394967] Mobile IPv6
  300. [    2.397730] ip6_tables: (C) 2000-2006 Netfilter Core Team
  301. [    2.404006] IPv6 over IPv4 tunneling driver
  302. [    2.409893] NET: Registered protocol family 17
  303. [    2.414912] NET: Registered protocol family 15
  304. [    2.420054] Bluetooth: RFCOMM TTY layer initialized
  305. [    2.425496] Bluetooth: RFCOMM socket layer initialized
  306. [    2.431238] Bluetooth: RFCOMM ver 1.11
  307. [    2.435409] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  308. [    2.441400] Bluetooth: BNEP filters: protocol multicast
  309. [    2.447279] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  310. [    2.454064] L2TP core driver, V2.0
  311. [    2.457866] PPPoL2TP kernel driver, V2.0
  312. [    2.462256] L2TP IP encapsulation support (L2TPv3)
  313. [    2.467663] L2TP netlink interface
  314. [    2.471500] L2TP ethernet pseudowire support (L2TPv3)
  315. [    2.477406] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  316. [    2.485968] ThumbEE CPU extension supported.
  317. [    2.490752] Registering SWP/SWPB emulation handler
  318. [    2.496100] sunxi_bootup_extend_init: bootup extend state 1
  319. [    2.503385] cmdline,disp=
  320. [    2.537981] cmdline,disp=
  321. [    2.541365] [DISP] disp_init_tv,line:540:screen 0 do not support TV TYPE!
  322. [    2.541391] [DISP] bsp_disp_tv_register,line:946:'ptv is null
  323. [    2.555486] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:14:54 UTC (894)
  324. [    2.564433] ths_fetch_sysconfig_para: type err  device_used = 1.
  325. [    2.572881] CPU Budget:Register notifier
  326. [    2.577257] CPU Budget:register Success
  327. [    2.581571] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  328. [    2.596419] ALSA device list:
  329. [    2.599731]   #0: audiocodec
  330. [    2.603007]   #1: sndhdmi
  331. [    2.606189] Waiting for root device /dev/mmcblk0p2...
  332. [    3.130075] [DISP] disp_hdmi_set_detect,line:405:hdmi0's mgr is NULL
  333. [    3.767288] *******************Try sdio*******************
  334. [    3.774285] mmc0: req failed (CMD5): -110, retrying...
  335. [    3.780868] mmc0: req failed (CMD5): -110, retrying...
  336. [    3.787439] mmc0: req failed (CMD5): -110, retrying...
  337. [    3.794030] *******************Try sd *******************
  338. [    3.868038] mmc0: new high speed SDHC card at address aaaa
  339. [    3.874754] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
  340. [    3.881196]  mmcblk0: p1 p2
  341. [    3.885167] *******************sd init ok*******************
  342. [    3.943084] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  343. [    3.952192] VFS: Mounted root (ext4 filesystem) on device 179:2.
  344. [    3.959852] devtmpfs: mounted
  345. [    3.963551] Freeing init memory: 324K
  346. [    4.427889] init: plymouth-upstart-bridge main process (95) terminated with status 1
  347. [    4.436689] init: plymouth-upstart-bridge main process ended, respawning
  348. [    4.476003] init: plymouth-upstart-bridge main process (105) terminated with status 1
  349. [    4.484966] init: plymouth-upstart-bridge main process ended, respawning
  350. [    4.521507] init: plymouth-upstart-bridge main process (108) terminated with status 1
  351. [    4.530531] init: plymouth-upstart-bridge main process ended, respawning
  352. [    4.539448] init: ureadahead main process (98) terminated with status 5
  353. [    6.095973] [XRADIO] Driver Label:L34M.01.08.0002  Nov  4 2016 11:22:27
  354. [    6.103648] [XRADIO] Allocated hw_priv @ d48d50e0
  355. [    6.109739] xradio wlan power on
  356. [    6.270365] [XRADIO] Detect SDIO card 1
  357. [    6.448328] systemd-udevd[294]: could not open builtin file '/lib/modules/3.4.39/modules.builtin.bin'
  358. [    6.455367] systemd-udevd[291]: could not open builtin file '/lib/modules/3.4.39/modules.builtin.bin'
  359.  * Starting Mount filesystems on boot[ OK ]
  360.  * Starting Signal sysvinit that the rootfs is mounted[ OK ]
  361.  * Starting Populate /dev filesystem[ OK ]
  362.  * Stopping Populate /dev filesystem[ OK ]
  363.  * Starting Clean /tmp directory[ OK ]
  364.  * Starting Populate and link to /run filesystem[ OK ]
  365.  * Stopping Populate and link to /run filesystem[ OK ]
  366.  * Stopping Clean /tmp directory[ OK ]
  367.  * Stopping Track if upstart is running in a container[ OK ]
  368.  * Starting Initialize or finalize resolvconf[ OK ]
  369.  * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
  370.  * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
  371.  * Starting Signal sysvinit that local filesystems are mounted[ OK ]
  372.  * Starting restore software rfkill state[ OK ]
  373.  * Starting Bridge udev events into upstart[ OK ]
  374.  * Stopping restore software rfkill state[ OK ]
  375.  * Starting Signal sysvinit that remote filesystems are mounted[ OK ]
  376.  * Starting device node and kernel event manager[ OK ]
  377.  * Starting flush early job output to logs[ OK ]
  378.  * Stopping Mount filesystems on boot[ OK ]
  379.  * Stopping flush early job output to logs[ OK ]
  380.  * Starting load modules from /etc/modules[ OK ]
  381.  * Starting cold plug devices[ OK ]
  382.  * Starting log initial device creation[ OK ]
  383.  * Starting Bridge file events into upstart[ OK ]
  384.  * Starting D-Bus system message bus[ OK ]
  385.  * Starting system logging daemon[ OK ]
  386.  * Starting userspace bootsplash[ OK ]
  387.  * Starting SystemD login management service[ OK ]
  388.  * Starting bluetooth daemon[ OK ]
  389.  * Stopping userspace bootsplash[ OK ]
  390.  * Starting Send an event to indicate plymouth is up[ OK ]
  391.  * Starting Uncomplicated firewall[ OK ]
  392.  * Starting configure network device security[ OK ]
  393.  * Starting configure network device[ OK ]
  394.  * Starting mDNS/DNS-SD daemon[ OK ]
  395.  * Stopping Send an event to indicate plymouth is up[ OK ]
  396.  * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
  397.  * Stopping Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
  398.  * Starting configure network device security[ OK ]
  399.  * Starting configure network device security[ OK ]
  400.  * Starting configure network device security[ OK ]
  401.  * Starting configure network device security[ OK ]
  402.  * Starting configure network device security[ OK ]
  403.  * Stopping cold plug devices[ OK ]
  404.  * Starting configure network device[ OK ]
  405.  * Starting configure network device[ OK ]
  406.  * Starting configure network device[ OK ]
  407.  * Starting configure network device[ OK ]
  408.  * Stopping log initial device creation[ OK ]
  409.  * Starting configure network device security[ OK ]
  410.  * Starting enable remaining boot-time encrypted block devices[ OK ]
  411.  * Starting Mount network filesystems[ OK ]
  412.  * Starting Failsafe Boot Delay[ OK ]
  413. [    8.290286] xradio wlan power off
  414.  * Starting configure virtual network devices[ OK ]
  415. [    8.345354] [XRADIO] Remove SDIO card 1
  416. [    8.359698] [SBUS_ERR] sdio probe timeout!
  417. [    8.364439] [XRADIO_ERR] sbus_sdio_init failed
  418.  * Starting mDNS/DNS-SD daemon[ OK ]
  419.  * Starting configure network device[ OK ]
  420.  * Stopping load modules from /etc/modules[ OK ]
  421.  * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
  422.  * Stopping Failsafe Boot Delay[ OK ]
  423. [ OK ]rting early crypto disks...        
  424.  * Starting System V initialisation compatibility[ OK ]
  425.  * Starting modem connection manager[ OK ]
  426.  * Starting configure network device security[ OK ]
  427.  * Stopping Mount network filesystems[ OK ]
  428.  * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[fail]
  429. [ OK ]ting up X socket directories...        
  430.  * Starting mDNS/DNS-SD daemon[ OK ]
  431.  * Stopping System V initialisation compatibility[ OK ]
  432.  * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ]
  433.  * Starting network connection manager[ OK ]
  434. [ OK ]rting NTP server ntpd        
  435. [ OK ]toring resolver state...        
  436.  * Starting System V runlevel compatibility[ OK ]
  437.  * Starting regular background program processing daemon[ OK ]
  438.  * Starting anac(h)ronistic cron[ OK ]
  439.  * Starting save kernel messages[ OK ]
  440.  * Starting OpenSSH server[ OK ]
  441.  * Starting CPU interrupts balancing daemon[ OK ]
  442.  * Stopping save kernel messages[ OK ]
  443.  
  444. Ubuntu 14.04.1 LTS orangepi ttyS0
  445.  
  446. orangepi login: root
  447. Password:
  448. Last login: Thu Jan  1 08:00:28 CST 1970 on ttyS0
  449. Welcome to Ubuntu 14.04.1 LTS (GNU/Linux 3.4.39 armv7l)
  450.  
  451.  * Documentation:  https://help.ubuntu.com/
  452.  
  453. New release '16.04.1 LTS' available.
  454. Run 'do-release-upgrade' to upgrade to it.
  455.  
  456. root@orangepi:~# uname -a
  457. Linux orangepi 3.4.39 #35 SMP PREEMPT Mon Nov 7 17:54:42 CST 2016 armv7l armv7l armv7l GNU/Linux
  458. root@orangepi:~# modinfo xradio_wlan  
  459. filename:       /lib/modules/3.4.39/xradio_wlan.ko
  460. alias:          xradio_core
  461. license:        GPL
  462. description:    XRadioTech WLAN driver core
  463. author:         XRadioTech
  464. srcversion:     EE504CDAD99C9B5CF34A68C
  465. depends:        
  466. intree:         Y
  467. vermagic:       3.4.39 SMP preempt mod_unload modversions ARMv7 p2v8
  468. parm:           macaddr:First MAC address (charp)
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top