Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root:~# smartctl --all /dev/sdc
- smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda LP
- Device Model: ST---------
- Serial Number: 5------
- LU WWN Device Id: 5 000c50 02a9a9bc4
- Firmware Version: CC34
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 4
- Local Time is: Tue Feb 3 15:12:15 2015 EST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 244) Self-test routine in progress...
- 40% of test remaining.
- Total time to complete Offline
- data collection: ( 633) seconds.
- Offline data collection
- capabilities: (0x73) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 255) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 109 099 006 Pre-fail Always - 22682343
- 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 125
- 5 Reallocated_Sector_Ct 0x0033 063 063 036 Pre-fail Always - 1517
- 7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 39831979
- 9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 27606
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 125
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 027 027 000 Old_age Always - 73
- 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032837
- 189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2
- 190 Airflow_Temperature_Cel 0x0022 074 065 045 Old_age Always - 26 (Min/Max 18/27)
- 194 Temperature_Celsius 0x0022 026 040 000 Old_age Always - 26 (0 16 0 0)
- 195 Hardware_ECC_Recovered 0x001a 030 028 000 Old_age Always - 22682343
- 197 Current_Pending_Sector 0x0012 087 087 000 Old_age Always - 553
- 198 Offline_Uncorrectable 0x0010 087 087 000 Old_age Offline - 553
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 53867479837615
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 181993453
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 179143972
- SMART Error Log Version: 1
- ATA Error Count: 73 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 73 occurred at disk power-on lifetime: 27570 hours (1148 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 58 ff ff ff 4f 00 14d+10:13:03.230 READ FPDMA QUEUED
- 60 00 08 ff ff ff 4f 00 14d+10:13:03.223 READ FPDMA QUEUED
- 60 00 88 ff ff ff 4f 00 14d+10:13:01.511 READ FPDMA QUEUED
- 60 00 08 ff ff ff 4f 00 14d+10:13:01.509 READ FPDMA QUEUED
- 60 00 98 ff ff ff 4f 00 14d+10:12:33.337 READ FPDMA QUEUED
- Error 72 occurred at disk power-on lifetime: 24736 hours (1030 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 ff ff ff 4f 00 39d+10:34:11.134 READ FPDMA QUEUED
- 27 00 00 00 00 00 e0 00 39d+10:34:11.133 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 39d+10:34:11.109 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 39d+10:34:11.109 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 39d+10:34:11.108 READ NATIVE MAX ADDRESS EXT
- Error 71 occurred at disk power-on lifetime: 24736 hours (1030 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 ff ff ff 4f 00 39d+10:34:07.381 READ FPDMA QUEUED
- 27 00 00 00 00 00 e0 00 39d+10:34:07.381 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 39d+10:34:07.370 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 39d+10:34:07.370 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 39d+10:34:07.369 READ NATIVE MAX ADDRESS EXT
- Error 70 occurred at disk power-on lifetime: 24736 hours (1030 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 ff ff ff 4f 00 39d+10:34:03.637 READ FPDMA QUEUED
- 27 00 00 00 00 00 e0 00 39d+10:34:03.637 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 39d+10:34:03.626 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 39d+10:34:03.626 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 39d+10:34:03.626 READ NATIVE MAX ADDRESS EXT
- Error 69 occurred at disk power-on lifetime: 24736 hours (1030 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 ff ff ff 4f 00 39d+10:33:59.883 READ FPDMA QUEUED
- 27 00 00 00 00 00 e0 00 39d+10:33:59.882 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 39d+10:33:59.871 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 39d+10:33:59.847 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 39d+10:33:59.847 READ NATIVE MAX ADDRESS EXT
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Self-test routine in progress 40% 27606 -
- # 2 Short offline Completed without error 00% 27596 -
- # 3 Short offline Completed without error 00% 27572 -
- # 4 Short offline Completed without error 00% 27548 -
- # 5 Short offline Completed without error 00% 27524 -
- # 6 Short offline Completed without error 00% 27500 -
- # 7 Short offline Completed without error 00% 27475 -
- # 8 Short offline Completed without error 00% 27451 -
- # 9 Short offline Completed without error 00% 27427 -
- #10 Short offline Completed without error 00% 27403 -
- #11 Short offline Completed without error 00% 27379 -
- #12 Short offline Completed without error 00% 27355 -
- #13 Short offline Completed without error 00% 27331 -
- #14 Short offline Completed without error 00% 27307 -
- #15 Short offline Completed without error 00% 27283 -
- #16 Extended offline Completed without error 00% 27260 -
- #17 Short offline Completed without error 00% 27253 -
- #18 Short offline Completed without error 00% 65 -
- #19 Extended offline Completed without error 00% 65 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement