PS Config

# generated by PrusaSlicer 2.9.6 on 2026-08-03 at 22:47:26 UTC
arc_fitting = emit_center
autoemit_temperature_commands = 1
automatic_extrusion_widths = 0
automatic_infill_combination = 0
automatic_infill_combination_max_layer_height = 100%
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 1
avoid_crossing_perimeters_max_detour = 0
bed_custom_model = /home/nsummers/.var/app/com.prusa3d.PrusaSlicer/config/PrusaSlicer/printer/EnderV2.stl
bed_custom_texture = /home/nsummers/.var/app/com.prusa3d.PrusaSlicer/config/PrusaSlicer/printer/CrealityBedTexture.png
bed_shape = 0x0,229x0,229x229,0x229
bed_temperature = 70
bed_temperature_extruder = 0
before_layer_gcode = _BEFORE_LAYER_CHANGE LAYER=[layer_num] LAST_LAYER=[total_layer_count] HEIGHT=[layer_z]
between_objects_gcode = _BETWEEN_OBJECT
binary_gcode = 0
bottom_fill_pattern = rectilinear
bottom_solid_layers = 3
bottom_solid_min_thickness = 0
bridge_acceleration = 3000
bridge_angle = 0
bridge_fan_speed = 70
bridge_flow_ratio = 0.9
bridge_speed = 20
brim_separation = 0
brim_type = no_brim
brim_width = 0
chamber_minimal_temperature = 0
chamber_temperature = 0
color_change_gcode = FILAMENT_CHANGE
colorprint_heights =
compatible_printers_condition_cummulative = ;"printer_notes!~/.*NO_TEMPLATES.*/ and printer_notes!~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes!~/.*PRINTER_MODEL_MK4IS.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and num_extruders>1)"
complete_objects = 0
cooling = 1
cooling_perimeter_transition_distance = 0
cooling_slowdown_logic = uniform_cooling
cooling_tube_length = 5
cooling_tube_retraction = 91.5
custom_parameters_filament = ""
custom_parameters_print =
custom_parameters_printer =
default_acceleration = 4000
default_filament_profile =
default_print_profile =
deretract_speed = 0
disable_fan_first_layers = 1
dont_support_bridges = 0
draft_shield = disabled
duplicate_distance = 6
elefant_foot_compensation = 0.13
enable_dynamic_fan_speeds = 0
enable_dynamic_overhang_speeds = 0
end_filament_gcode = "; Filament-specific end gcode"
end_gcode = _AFTER_PRINT
ensure_vertical_shell_thickness = enabled
external_perimeter_acceleration = 2000
external_perimeter_extrusion_width = 0
external_perimeter_speed = 40
external_perimeters_first = 0
extra_loading_move = -2
extra_perimeters = 1
extra_perimeters_on_overhangs = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_colour = ""
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 0.97959
extrusion_width = 0
fan_always_on = 1
fan_below_layer_time = 0
filament_abrasive = 0
filament_colour = #000096
filament_cooling_final_speed = 2
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_cost = 36.29
filament_density = 1.27
filament_deretract_speed = nil
filament_diameter = 1.75
filament_flush_speed = 0
filament_flush_volume = 0
filament_infill_max_crossing_speed = 0
filament_infill_max_speed = 0
filament_load_time = 0
filament_loading_speed = 14
filament_loading_speed_start = 19
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 0
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_purge_multiplier = 100%
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_seam_gap_distance = nil
filament_settings_id = "Prusament PETG v2"
filament_shrinkage_compensation_xy = 0%
filament_shrinkage_compensation_z = 0%
filament_soluble = 0
filament_spool_weight = 201
filament_stamping_distance = 0
filament_stamping_loading_speed = 20
filament_toolchange_delay = 0
filament_travel_lift_before_obstacle = nil
filament_travel_max_lift = nil
filament_travel_ramping_lift = nil
filament_travel_slope = nil
filament_type = PETG
filament_unload_time = 0
filament_unloading_speed = 20
filament_unloading_speed_start = 100
filament_vendor = Prusa Polymers
filament_wipe = nil
fill_angle = 45
fill_density = 10%
fill_pattern = gyroid
first_layer_acceleration = 2000
first_layer_acceleration_over_raft = 0
first_layer_bed_temperature = 70
first_layer_extrusion_width = 0
first_layer_height = 0.2
first_layer_infill_speed = 0
first_layer_speed = 40
first_layer_speed_over_raft = 30
first_layer_temperature = 240
full_fan_speed_layer = 1
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 45
gcode_comments = 1
gcode_flavor = marlin2
gcode_label_objects = octoprint
gcode_resolution = 0.01
gcode_substitutions =
high_current_on_filament_swap = 0
host_type = octoprint
idle_temperature = nil
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_overlap = 8%
infill_speed = 70
inherits_cummulative = ;"Prusament PETG @Template";
interface_shells = 0
interlocking_beam = 0
interlocking_beam_layer_count = 2
interlocking_beam_width = 0.8
interlocking_boundary_avoidance = 2
interlocking_depth = 2
interlocking_orientation = 22.5
ironing = 0
ironing_flowrate = 0%
ironing_spacing = 0.2
ironing_speed = 30
ironing_type = top
layer_gcode = _AFTER_LAYER_CHANGE LAYER=[layer_num] LAST_LAYER=[total_layer_count] HEIGHT=[layer_z]
layer_height = 0.16
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 6000,1300
machine_max_acceleration_extruding = 6000,1300
machine_max_acceleration_retracting = 6000,1300
machine_max_acceleration_travel = 6000,1300
machine_max_acceleration_x = 6000,1300
machine_max_acceleration_y = 6000,1300
machine_max_acceleration_z = 1000,100
machine_max_feedrate_e = 150,10
machine_max_feedrate_x = 200,80
machine_max_feedrate_y = 200,80
machine_max_feedrate_z = 50,10
machine_max_jerk_e = 10,5
machine_max_jerk_x = 10,5
machine_max_jerk_y = 10,5
machine_max_jerk_z = 10,5
machine_max_junction_deviation = 0,0
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_fan_speed = 100
max_layer_height = 0.36
max_print_height = 200
max_print_speed = 70
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_fan_speed = 50
min_feature_size = 25%
min_layer_height = 0.12
min_print_speed = 10
min_skirt_length = 0
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
multimaterial_purging = 140
notes =
nozzle_diameter = 0.6
nozzle_high_flow = 1
only_one_perimeter_first_layer = 1
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
over_bridge_speed = 50
overhang_fan_speed_0 = 0
overhang_fan_speed_1 = 0
overhang_fan_speed_2 = 0
overhang_fan_speed_3 = 0
overhang_speed_0 = 15
overhang_speed_1 = 15
overhang_speed_2 = 20
overhang_speed_3 = 25
overhangs = 1
parking_pos_retraction = 92
pause_print_gcode = PAUSE
perimeter_acceleration = 2000
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_generator = arachne
perimeter_speed = 50
perimeters = 2
physical_printer_settings_id = Vincent Van Flow
post_process =
prefer_clockwise_movements = 0
print_host =
print_settings_id = 0.6N 0.16H - PETG - Prusament v2
printer_model =
printer_notes =
printer_settings_id = E3V2 - Klipper - 0.6N (High-Flow CHT)
printer_technology = FFF
printer_variant =
printer_vendor =
printhost_apikey =
printhost_cafile =
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 0
raft_layers = 0
remaining_times = 1
resolution = 0.01
retract_before_travel = 0
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 7
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 50
scarf_seam_entire_loop = 0
scarf_seam_length = 20
scarf_seam_max_segment_length = 1
scarf_seam_on_inner_perimeters = 0
scarf_seam_only_on_smooth = 1
scarf_seam_placement = nowhere
scarf_seam_start_height = 0%
seam_gap_distance = 15%
seam_position = nearest
silent_mode = 1
single_extruder_multi_material = 0
single_extruder_multi_material_priming = 1
skirt_distance = 5
skirt_height = 1
skirts = 5
slice_closing_radius = 0.049
slicing_mode = regular
slowdown_below_layer_time = 5
small_perimeter_speed = 25
solid_infill_acceleration = 0
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 70
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
start_filament_gcode = "; Filament gcode\n"
start_gcode = M140 S0 ; Needed so slicer doesn't add extra M140\nM104 S0 ; Needed so slicer doesn't add extra M104\n_BEFORE_PRINT INITIAL_BED_TEMP=[first_layer_bed_temperature] INITIAL_NOZZLE_TEMP=[first_layer_temperature] PREHEAT_NOZZLE_TEMP=175 NOZZLE_TEMP=[temperature] Z_OFFSET=[z_offset] BED_TEMP=[bed_temperature] LAYER_HEIGHT=[layer_height] NOZZLE_DIAMETER=[nozzle_diameter] INFILL_PERCENT=[fill_density] INFILL_PATTERN=[fill_pattern] PRIMER_LINES=0
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0.36
support_material_bottom_interface_layers = 3
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.36
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.96
support_material_interface_speed = 50
support_material_pattern = rectilinear
support_material_spacing = 0.5
support_material_speed = 50
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 1
support_material_xy_spacing = 50%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
temperature = 250
template_custom_gcode =
thick_bridges = 0
thin_walls = 0
thumbnails = 64x64/PNG, 32x32/PNG
thumbnails_format = PNG
toolchange_gcode =
toolchange_ordering = optimized
top_fill_pattern = monotonic
top_infill_extrusion_width = 0
top_one_perimeter_type = top
top_solid_infill_acceleration = 2000
top_solid_infill_speed = 40
top_solid_layers = 4
top_solid_min_thickness = 0
travel_acceleration = 4000
travel_lift_before_obstacle = 0
travel_max_lift = 0
travel_ramping_lift = 0
travel_short_distance_acceleration = 0
travel_slope = 0
travel_speed = 150
travel_speed_z = 20
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe = 1
wipe_into_infill = 0
wipe_into_objects = 0
wipe_tower = 0
wipe_tower_acceleration = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_flow = 100%
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_width = 60
wiping_volumes_matrix = 0
wiping_volumes_use_custom_matrix = 0
xy_size_compensation = 0
z_offset = 0