SHARE
TWEET

Untitled

DaLuppo Jan 20th, 2020 (edited) 95 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [2020-01-20 05:07:31] [Output] : ★ Marcus Wilburn drives the Honda Civic between a two post lift and hops out before adjusting the
  2. [2020-01-20 05:07:46] [Output] : ★ arms on the driver side beneath the pinch welds of the car, moving to the left side and      ((Marcus Wilburn))
  3. [2020-01-20 05:07:57] [Output] : ★ lining the passenger side arms beneath the pinch welds as well.      ((Marcus Wilburn))
  4. [2020-01-20 05:08:15] [Output] : ★ Marcus Wilburn approaches the work bench and emits a sigh as he grabs his wrench and set of
  5. [2020-01-20 05:08:25] [Output] : ★ different size sockets.      ((Marcus Wilburn))
  6. [2020-01-20 05:08:37] [Output] : ★ Marcus Wilburn makes his way back to the car and places the ratchet and the sockets down in
  7. [2020-01-20 05:08:45] [Output] : ★ front of the hood before opening the driver door and leaning in to pull the hood release      ((Marcus Wilburn))
  8. [2020-01-20 05:08:48] [Output] : ★ handle.      ((Marcus Wilburn))
  9. [2020-01-20 05:08:58] [Output] : ★ The hood pops open, Marcus walks up to the front and slides his fingers beneath the hood      ((Marcus Wilburn))
  10. [2020-01-20 05:09:06] [Output] : ★ before raising it up and fixing it with the hood prop.      ((Marcus Wilburn))
  11. [2020-01-20 05:09:51] [Output] : ★ Marcus Wilburn bends over and picks up the ratchet as he fits it with the right size socket and undoes the
  12. [2020-01-20 05:09:59] [Output] : ★ two bolts securing the exhaust heat shield.      ((Marcus Wilburn))
  13. [2020-01-20 05:10:07] [Output] : ★ Marcus Wilburn takes off the exhaust heat shield and tosses it away from the car as he reveals the
  14. [2020-01-20 05:10:12] [Output] : ★ exhaust manifold.      ((Marcus Wilburn))
  15. [2020-01-20 05:10:21] [Output] : ★ Marcus Wilburn replaces the socket on the ratchet and proceeds to undo the bolts securing the
  16. [2020-01-20 05:10:31] [Output] : ★ exhaust manifold to the engine head.      ((Marcus Wilburn))
  17. [2020-01-20 05:13:08] [Output] : ★ Marcus Wilburn puts the ratchet aside and retrives a flat head screwdriver as he starts unscrewing
  18. [2020-01-20 05:15:10] [Output] : ★ the screws mounting the front bumper in place.      ((Marcus Wilburn))
  19. [2020-01-20 05:16:43] [Output] : ★ Marcus Wilburn then unscrews the ones securing the bumper to the plastic splash shield.
  20. [2020-01-20 05:17:09] [Output] : ★ Marcus Wilburn wiggles the bumper off of it's place and carelessly tosses it to the side to make clearance.
  21. [2020-01-20 05:18:06] [Output] : ★ Marcus Wilburn uses the screwdriver to undo the pins on the wire harness to the radiator fan.
  22. [2020-01-20 05:18:31] [Output] : ★ Marcus Wilburn puts away the screwdriver and reaches out for the ratchet, using it to loosen the bolts
  23. [2020-01-20 05:18:40] [Output] : ★ on each corner of the radiator.      ((Marcus Wilburn))
  24. [2020-01-20 05:19:08] [Output] : ★ Marcus Wilburn puts the wrench on the strut tower and grabs the top of the radiator as he fishes out the
  25. [2020-01-20 05:19:20] [Output] : ★ engine bay with a jiggling motion.      ((Marcus Wilburn))
  26. [2020-01-20 05:20:22] [Output] : ★ Marcus Wilburn lets go of the radiator when the hoses connected to it resist the movement.
  27. [2020-01-20 05:20:43] [Output] : ★ Marcus Wilburn grabs the screw driver and loosens the screws on the clamps securing the hoses
  28. [2020-01-20 05:21:02] [Output] : ★ to the radiator, he puts the screwdriver aside and pulls the radiator out of the bay      ((Marcus Wilburn))
  29. [2020-01-20 05:21:12] [Output] : ★ to rest it against the wall in the garage.      ((Marcus Wilburn))
  30. [2020-01-20 05:21:59] [Output] : ★ Marcus Wilburn sighs as he realizes how restless he is, he tried to pull the radiator out the bay without
  31. [2020-01-20 05:22:07] [Output] : ★ removing the hoses connected to it.      ((Marcus Wilburn))
  32. [2020-01-20 05:22:49] [Output] : ★ Marcus Wilburn mumbles as he grabs the ratchet and takes a knee in order to undo the two bolts
  33. [2020-01-20 05:23:43] [Output] : ★ securing the exhaust pipe's flange to the bottom of the exhaust manifold.      ((Marcus Wilburn))
  34. [2020-01-20 05:24:10] [Output] : ★ Marcus Wilburn pushes himself up and uses both hands to pull the exhaust manifold out of its place
  35. [2020-01-20 05:24:36] [Output] : ★ as it's now completely loose, he tosses it near the rest of the junk.      ((Marcus Wilburn))
  36. [2020-01-20 05:25:28] [Output] : ★ Marcus Wilburn grabs the screwdriver and uses it to carelessly tear the tape on the turbo kit carton box.
  37. [2020-01-20 05:25:43] [Output] : ★ Marcus Wilburn pulls the turbo manifold out of the box and undoes the wrapping before head back to
  38. [2020-01-20 05:25:50] [Output] : ★ the car and placing it in the exhaust manifold's place to test fit it.      ((Marcus Wilburn))
  39. [2020-01-20 05:25:56] [Output] : ★ Marcus Wilburn nods a couple times as he fishes out a ziploc bag of bolts from the turbo kit's box.
  40. [2020-01-20 05:30:12] [Output] : ★ Marcus Wilburn refits the turbo manifold in the exhaust manifold's spot and inserts the bolts in the
  41. [2020-01-20 05:30:25] [Output] : ★ holes as he slightly tightens them with his bare fingers.      ((Marcus Wilburn))
  42. [2020-01-20 05:30:34] [Output] : ★ Marcus Wilburn grabs the ratchet and fully secures the said bolts to fix the turbo manifold in place.
  43. [2020-01-20 05:30:42] [Output] : ★ Marcus Wilburn extracts the turbo compressor itself out of the box and slides it through the studs on the
  44. [2020-01-20 05:30:49] [Output] : ★ turbo manifold before hand tightening the lugs and washers that came with it.      ((Marcus Wilburn))
  45. [2020-01-20 05:30:56] [Output] : ★ Marcus Wilburn scoops up the ratchet and uses it to tighten the said lugs in order to firmly secure the
  46. [2020-01-20 05:31:03] [Output] : ★ compressor housing to the turbo manifold.      ((Marcus Wilburn))
  47. [2020-01-20 05:32:26] [Output] : ★ Marcus Wilburn admires the turbo housing sitting on the turbo manifold, he draws a rather wide smile as
  48. [2020-01-20 05:32:35] [Output] : ★ he checks it out from different angles.      ((Marcus Wilburn))
  49. [2020-01-20 05:33:38] [Output] : ★ Marcus Wilburn grabs a remote to the two post lift and pushes a button to raise the car up, enough
  50. [2020-01-20 05:33:51] [Output] : ★ for him to get under it.      ((Marcus Wilburn))
  51. [2020-01-20 05:35:09] [Output] : ★ Marcus Wilburn steps beneath the car with his ratchet, he unplugs the O2 sensor and starts loosening
  52. [2020-01-20 05:35:31] [Output] : ★ the bolts securing the exhaust assembly hangers to the frame of the Honda.      ((Marcus Wilburn))
  53. [2020-01-20 05:35:53] [Output] : ★ Marcus Wilburn stands aside as he does so, making enough space for the exhaust assembly to fall
  54. [2020-01-20 05:36:05] [Output] : ★ down without hitting his feet.      ((Marcus Wilburn))
  55. [2020-01-20 05:36:36] [Output] : ★ Marcus Wilburn finishes undoing the bolts of the exhaust hangers, the system falls after Marcus slightly
  56. [2020-01-20 05:36:55] [Output] : ★ jiggles it, he bends over and grabs the exhaust pipe as he drags it away from beneath      ((Marcus Wilburn))
  57. [2020-01-20 05:36:57] [Output] : ★ the car.      ((Marcus Wilburn))
  58. [2020-01-20 05:39:35] [Output] : ★ Marcus Wilburn pushes a button on the lift remote to lower the car down, he makes his way to the
  59. [2020-01-20 05:40:06] [Output] : ★ bay and yawns as he takes a moment to assess the situation and figure his next move.      ((Marcus Wilburn))
  60. [2020-01-20 05:41:14] [Output] : ★ Marcus Wilburn grabs a plastic container and slides it beneath the oil pan before taking a knee and
  61. [2020-01-20 05:41:30] [Output] : ★ using a 10mm socket on his ratchet to loosen the drain bolt.      ((Marcus Wilburn))
  62. [2020-01-20 05:42:02] [Output] : ★ Marcus Wilburn allows the oil to drain in the plastic container, he lights up a cigarette and waits
  63. [2020-01-20 05:42:06] [Output] : ★ patiently.      ((Marcus Wilburn))
  64. [2020-01-20 05:42:55] [Output] : ★ Marcus Wilburn puffs on his cigarette as he narrows his eyes at the turbo housing.
  65. [2020-01-20 05:43:43] [Output] : ★ Marcus Wilburn drops the cancer stick down and stomps it before approaching the vehicle and
  66. [2020-01-20 05:44:01] [Output] : ★ using the remote to lift it up about a meter for clearance.      ((Marcus Wilburn))
  67. [2020-01-20 05:44:33] [Output] : ★ Marcus Wilburn kneels down and pulls the plastic container away as he using the 10mm socket and ratchet
  68. [2020-01-20 05:44:53] [Output] : ★ to loosen the bolts securing the oil pan to the bottom of the D16 engine.      ((Marcus Wilburn))
  69. [2020-01-20 05:45:11] [Output] : ★ Marcus Wilburn grabs the oil pan and heads to the workbench as he rests it there, he grabs a
  70. [2020-01-20 05:45:25] [Output] : ★ clean fiber towel and wipes off the remaining oil in it.      ((Marcus Wilburn))
  71. [2020-01-20 05:46:24] [Output] : ★ Marcus Wilburn cleans the oil pan and grabs an electric drill as he fits it with a bit.
  72. [2020-01-20 05:46:46] [Output] : ★ Marcus Wilburn turns it on and pulls the trigger in order to steadily drill a hole in the oil pan.
  73. [2020-01-20 05:47:13] [Output] : ★ Marcus Wilburn grabs the oil tap from the turbo kit carton box and inserts it into the hole he drilled.
  74. [2020-01-20 05:48:32] [Output] : ★ Marcus Wilburn nods as he appears satisfied with the tight fit, he takes it off and applies some
  75. [2020-01-20 05:48:49] [Output] : ★ teflon tape to the tap's thread to avoid any future leaks.      ((Marcus Wilburn))
  76. [2020-01-20 05:49:36] [Output] : ★ Marcus Wilburn fits the tap again and secures it before scratching the old gasket on the oil pan.
  77. [2020-01-20 05:50:19] [Output] : ★ Marcus Wilburn grabs an RTV tube and squeezes it as he uses his finger to spread it around the
  78. [2020-01-20 05:50:38] [Output] : ★ oil pan connection surface, creating a new gasket.      ((Marcus Wilburn))
  79. [2020-01-20 05:50:55] [Output] : ★ Marcus Wilburn takes the pan back to the car and fits it in place as he hand tightens the bolts.
  80. [2020-01-20 05:51:19] [Output] : ★ Marcus Wilburn then uses the ratchet and 10mm socket to fully tighten them in a cristian cross pattern to
  81. [2020-01-20 05:51:23] [Output] : ★ avoid leaks.      ((Marcus Wilburn))
  82. [2020-01-20 05:55:19] [Output] : ★ Marcus Wilburn pushes himself up and takes the philips head screwdriver, using it to undo the lid of the
  83. [2020-01-20 05:55:27] [Output] : ★ airbox.      ((Marcus Wilburn))
  84. [2020-01-20 05:56:09] [Output] : ★ Marcus Wilburn scratches his head for a moment before placing the philips head screwdriver aside
  85. [2020-01-20 05:56:43] [Output] : ★ and getting the flat head one, using it to undo the clamp securing the OEM intake tube      ((Marcus Wilburn))
  86. [2020-01-20 05:56:58] [Output] : ★ to the throttle body.      ((Marcus Wilburn))
  87. [2020-01-20 05:57:24] [Output] : ★ Marcus Wilburn grasps on the loose air tube and pulls as hard as he could, eventually breaking the
  88. [2020-01-20 05:57:52] [Output] : ★ OEM airbox off of its place, he tosses it aside carelessly.      ((Marcus Wilburn))
  89. [2020-01-20 06:01:48] [Output] : ★ Marcus Wilburn takes out all the intercooler silicon hoses that came with the kit along with a printed
  90. [2020-01-20 06:03:21] [Output] : ★ diagram and installs the first piece's end to the throttle body, using a clamp to secure it      ((Marcus Wilburn))
  91. [2020-01-20 06:03:25] [Output] : ★ in place.      ((Marcus Wilburn))
  92. [2020-01-20 06:04:15] [Output] : ★ Marcus Wilburn grabs the intercooler itself and rests it on the car's frame where the bumper is
  93. [2020-01-20 06:04:37] [Output] : ★ supposed to go, he continues routing the silicone hoses until he achives the connection      ((Marcus Wilburn))
  94. [2020-01-20 06:05:40] [Output] : ★ from the throttle body to one side of the intercooler, securing the said hoses with the      ((Marcus Wilburn))
  95. [2020-01-20 06:05:46] [Output] : ★ provided clamps.      ((Marcus Wilburn))
  96. [2020-01-20 06:06:25] [Output] : ★ Marcus Wilburn makes a second connection running from the second side of the intercooler to
  97. [2020-01-20 06:07:00] [Output] : ★ the turbine's air outlet.      ((Marcus Wilburn))
  98. [2020-01-20 06:07:16] [Output] : ★ Marcus Wilburn fits clamps on the loose silicone hoses and tightens them with the screwdriver.
  99. [2020-01-20 06:08:55] [Output] : ★ Marcus Wilburn yawns as he inspects the intercooler setup, looking for any mistakes he's done.
  100. [2020-01-20 06:09:10] [Output] :  [English] Marcus Wilburn says: Looking good.
  101. [2020-01-20 06:09:38] [Output] : ★ Marcus Wilburn opens a second carton box and takes out a cold air intake assembly, he fits the
  102. [2020-01-20 06:10:02] [Output] : ★ hose onto the compressor's inlet and secures it with the provided clamp by tightening the      ((Marcus Wilburn))
  103. [2020-01-20 06:10:06] [Output] : ★ screw on it down.      ((Marcus Wilburn))
  104. [2020-01-20 06:11:42] [Output] : ★ Marcus Wilburn is seemingly happy with the setup so far, he grabs the oil feed line from the box and
  105. [2020-01-20 06:12:12] [Output] : ★ connects it to the tap he's installed in the oil pan, routing it all the way to the      ((Marcus Wilburn))
  106. [2020-01-20 06:13:01] [Output] : ★ turbo housing afterwards, connecting it in the right slot and using a solid wrench to      ((Marcus Wilburn))
  107. [2020-01-20 06:13:06] [Output] : ★ secure it in place.      ((Marcus Wilburn))
  108. [2020-01-20 06:14:00] [Output] : ★ Marcus Wilburn then proceeds to plug the end of the oil return line to the tap on the oil pan, securing it
  109. [2020-01-20 06:14:27] [Output] : ★ and routing it to the turbo housing as he connects it in the associated slot.      ((Marcus Wilburn))
  110. [2020-01-20 06:14:54] [Output] : ★ Marcus Wilburn secures both ends after applying teflon tape to make sure it wouldn't leak.
  111. [2020-01-20 06:17:08] [Output] : ★ Marcus Wilburn takes the electric drill and fits it with a bit of the right size before drilling into the
  112. [2020-01-20 06:17:12] [Output] : ★ vacuum line.      ((Marcus Wilburn))
  113. [2020-01-20 06:18:05] [Output] : ★ Marcus Wilburn places the drill aside and grabs a T connector as he fits it in the hole's just drilled.
  114. [2020-01-20 06:18:52] [Output] : ★ Marcus Wilburn fishes the blow off valve that came with the kit out the box and connects it to the T
  115. [2020-01-20 06:19:18] [Output] : ★ connection he's just installed, he uses a clamp to tighten it in place.      ((Marcus Wilburn))
  116. [2020-01-20 06:23:44] [Output] : ★ Marcus Wilburn grabs the airbox he's removed earlier and fishes the filter out of it before putting it back
  117. [2020-01-20 06:24:33] [Output] : ★ in place, just rested there for the time being, he moves the cold air filter inside it and      ((Marcus Wilburn))
  118. [2020-01-20 06:27:31] [Output] : ★ emits a sigh as he looks at the engine bay.      ((Marcus Wilburn))
  119. [2020-01-20 06:28:23] [Output] : ★ Marcus Wilburn uses the ratchet to undo the two bolts of the left side of the hood.
  120. [2020-01-20 06:28:42] [Output] : ★ Marcus Wilburn supports the hood with his left hand and undoes the two bolts on the right side, the hood
  121. [2020-01-20 06:29:08] [Output] : ★ prop is making his life easier, when he's done unscrewing the bolts, he quickly tosses      ((Marcus Wilburn))
  122. [2020-01-20 06:29:23] [Output] : ★ the ratchet aside and uses both hands to lift it up with a grunt and move it to the work      ((Marcus Wilburn))
  123. [2020-01-20 06:29:27] [Output] : ★ bench.      ((Marcus Wilburn))
  124. [2020-01-20 06:30:46] [Output] : ★ Marcus Wilburn grabs his torch set and adjusts the gas and oxygen valves, enough of the mixture to spark it
  125. [2020-01-20 06:30:51] [Output] : ★ up.      ((Marcus Wilburn))
  126. [2020-01-20 06:31:43] [Output] : ★ Marcus Wilburn grabs his protective eyewear and puts it on before increasing the gas amount for
  127. [2020-01-20 06:32:26] [Output] : ★ a bigger flame, he cuts a circle big enough for his hood exit plans in the hood.      ((Marcus Wilburn))
  128. [2020-01-20 06:33:07] [Output] : ★ Marcus Wilburn puts out the gas operated torch and places it aside as he gets his angle grinder and uses
  129. [2020-01-20 06:33:25] [Output] : ★ it to smoothen to edges of the circle he's just cut.      ((Marcus Wilburn))
  130. [2020-01-20 06:34:15] [Output] : ★ Marcus Wilburn grunts as he lifts the hood up with all of his might, he moves it back in place and
  131. [2020-01-20 06:34:24] [Output] : ★ lines the holes up with the brackets.      ((Marcus Wilburn))
  132. [2020-01-20 06:35:01] [Output] : ★ Marcus Wilburn supports it with his left hand while using his right one to tighten the bolts in order
  133. [2020-01-20 06:35:10] [Output] : ★ to mount the hood back in place.      ((Marcus Wilburn))
  134. [2020-01-20 06:36:15] [Output] : ★ Marcus Wilburn doesn't take off his protective glasses, he opens another box and takes out a
  135. [2020-01-20 06:37:07] [Output] : ★ 90 degree DIY exhaust pipe, he lines it up with the turbine exhaust outlet while      ((Marcus Wilburn))
  136. [2020-01-20 06:37:29] [Output] : ★ using his left hand to slowly lower the hood to know how much he should cut in order      ((Marcus Wilburn))
  137. [2020-01-20 06:37:46] [Output] : ★ for the pipe to fit through the hood exit hole he's cut.      ((Marcus Wilburn))
  138. [2020-01-20 06:38:09] [Output] : ★ Marcus Wilburn bobs his head and raises the hood back up, applying the prop.
  139. [2020-01-20 06:38:29] [Output] : ★ Marcus Wilburn heads to the workbench and mans the electric saw, he turns the machine on and
  140. [2020-01-20 06:38:51] [Output] : ★ steadily cuts through the pipe to trim it down in order for it to fit his needs.      ((Marcus Wilburn))
  141. [2020-01-20 06:39:21] [Output] : ★ Marcus Wilburn places the saw aside after turning it off, he uses the grinder to smoothen the
  142. [2020-01-20 06:39:36] [Output] : ★ sharp edges produced by the saw.      ((Marcus Wilburn))
  143. [2020-01-20 06:39:57] [Output] : ★ Marcus Wilburn grabs the pipe and test fits it again, seemingly impressed as it meets his needs.
  144. [2020-01-20 06:40:51] [Output] : ★ Marcus Wilburn grabs his TIC welder post closer to the hood and turns the machine on as he adjusts the
  145. [2020-01-20 06:40:58] [Output] : ★ parameters.      ((Marcus Wilburn))
  146. [2020-01-20 06:41:41] [Output] : ★ Marcus Wilburn wears a pair of protective gloves and holds the pipe in place as he carefully
  147. [2020-01-20 06:41:51] [Output] : ★ welds the pipe to the turbine exhaust outlet.      ((Marcus Wilburn))
  148. [2020-01-20 06:42:36] [Output] : ★ Marcus Wilburn ensures he forgets no spots to avoid any possible leaks, he lets go of the pipe once it's in
  149. [2020-01-20 06:42:51] [Output] : ★ place and lowers the hood back and forth to see if there's any clearance issue, apparently      ((Marcus Wilburn))
  150. [2020-01-20 06:42:54] [Output] : ★ none.      ((Marcus Wilburn))
  151. [2020-01-20 06:46:37] [Output] : [STAFF] (1) Junior Moderator Joseph King (elchapo): Wanna see some crazy stuff?
  152. [2020-01-20 06:47:16] [Output] : ★ Marcus Wilburn supports the hood with the prop and grabs the bumper he's removed earlier.
  153. [2020-01-20 06:47:43] [Output] : ★ Marcus Wilburn test fits it and uses a permanent marker to mark where he needs to cut to make enough
  154. [2020-01-20 06:48:03] [Output] : ★ room for his front mount intercooler.      ((Marcus Wilburn))
  155. [2020-01-20 06:48:22] [Output] : ★ Marcus Wilburn takes the bumper to the workbench and turns on the electric saw as he carefully
  156. [2020-01-20 06:48:40] [Output] : ★ cuts through the marked lines to removed the excess material from the bumper.      ((Marcus Wilburn))
  157. [2020-01-20 06:49:12] [Output] : ★ Marcus Wilburn grabs the final product after smoothing the edges with an angle grinder for a hotter look.
  158. [2020-01-20 06:49:44] [Output] : ★ Marcus Wilburn fits the bumper back on and cops a screwdriver as he starts screwing it back
  159. [2020-01-20 06:50:15] [Output] : ★ in place, giving it a gentle pull to see if it's any loose.      ((Marcus Wilburn))
  160. [2020-01-20 06:50:43] [Output] : ★ Marcus Wilburn puts the screwdriver aside and grabs the top of the radiator before lifting it up and
  161. [2020-01-20 06:50:51] [Output] : ★ carefully dropping it back in place.      ((Marcus Wilburn))
  162. [2020-01-20 06:51:16] [Output] : ★ Marcus Wilburn hand fits the radiator hoses back on and uses the screwdriver to screw in the clamps
  163. [2020-01-20 06:51:22] [Output] : ★ in order to tighten them.      ((Marcus Wilburn))
  164. [2020-01-20 06:51:48] [Output] : ★ Marcus Wilburn reconnects the wire harness to the radiator fan and yawns as he checks out the
  165. [2020-01-20 06:51:54] [Output] : ★ progress he's made so far.      ((Marcus Wilburn))
  166. [2020-01-20 07:06:08] [Output] : ★ Marcus Wilburn heads to the back of the car and pops the trunk open before removing the carpet
  167. [2020-01-20 07:06:43] [Output] : ★ covering the cover to the fuel pump assembly.      ((Marcus Wilburn))
  168. [2020-01-20 07:07:18] [Output] : ★ Marcus Wilburn places a bunch of dry towels around the the cover and undoes the bolts prior to fishing
  169. [2020-01-20 07:08:04] [Output] : ★ a flat head screwdriver out of his pocket and using it to undo the harness to the      ((Marcus Wilburn))
  170. [2020-01-20 07:08:10] [Output] : ★ fuel pump assembly.      ((Marcus Wilburn))
  171. [2020-01-20 07:08:36] [Output] : ★ Marcus Wilburn then proceeds to unscrew the lid to reveal the pump itself, he unplugs the electric
  172. [2020-01-20 07:08:52] [Output] : ★ connections and takes it out before throwing it to the side.      ((Marcus Wilburn))
  173. [2020-01-20 07:09:13] [Output] : ★ Marcus Wilburn opens the carton box and takes out a brand new high flow fuel pump, dropping it
  174. [2020-01-20 07:09:22] [Output] : ★ inside the pump assembly and reconnecting the wires.      ((Marcus Wilburn))
  175. [2020-01-20 07:09:42] [Output] : ★ Marcus Wilburn places the lid back on and uses the screwdriver to fix it in place.
  176. [2020-01-20 07:10:05] [Output] : ★ Marcus Wilburn drops the fuel pump assembly back inside the fuel tank through the hole and reconnects the
  177. [2020-01-20 07:10:14] [Output] : ★ wire harness.      ((Marcus Wilburn))
  178. [2020-01-20 07:10:41] [Output] : ★ Marcus Wilburn puts the cover back and tightens the bolts using his ratchet and the right size socket.
  179. [2020-01-20 09:11:32] [Output] : ★ Marcus Wilburn fits his ratcheting wrench with a 10mm socket and undoes the three nuts that secure the
  180. [2020-01-20 09:11:45] [Output] : ★ fuel rail in place.      ((Marcus Wilburn))
  181. [2020-01-20 09:12:27] [Output] : ★ Marcus Wilburn grabs an dry towel and places it beneath the engine before taking an adjustable
  182. [2020-01-20 09:12:55] [Output] : ★ wrench and slowly loosening the nut securing the end of the fuel feed line to the      ((Marcus Wilburn))
  183. [2020-01-20 09:13:36] [Output] : ★ fuel rail, he eases the fuel pressure out the system as the fuel drips down on the      ((Marcus Wilburn))
  184. [2020-01-20 09:13:43] [Output] : ★ dry towel he placed.      ((Marcus Wilburn))
  185. [2020-01-20 09:14:06] [Output] : ★ Marcus Wilburn completely removes the said nut and the washer with it, placing them aside for later
  186. [2020-01-20 09:14:08] [Output] : ★ use.      ((Marcus Wilburn))
  187. [2020-01-20 09:14:41] [Output] : ★ Marcus Wilburn proceeds to do the same with the fuel return hose on the fuel rack, he loosens then ut
  188. [2020-01-20 09:14:46] [Output] : ★ the nut*      ((Marcus Wilburn))
  189. [2020-01-20 09:15:03] [Output] : ★ and saves it along with the washer for later installation.      ((Marcus Wilburn))
  190. [2020-01-20 09:17:18] [Output] : ★ Marcus Wilburn eases the fuel rail out of place as he does so extremely slowly trying not to loose
  191. [2020-01-20 09:17:52] [Output] : ★ the rubber seals of the injectors inside.      ((Marcus Wilburn))
  192. [2020-01-20 09:20:39] [Output] : ★ Marcus Wilburn unplugs the wire harness to each injector before taking the fuel rail to the workbench and
  193. [2020-01-20 09:24:02] [Output] : ★ placing a cloth beneath the rail as he places it down on the bench.      ((Marcus Wilburn))
  194. [2020-01-20 09:24:35] [Output] : ★ Marcus Wilburn starts wiggling the OEM injectors out of place and removing them from the fuel
  195. [2020-01-20 09:25:12] [Output] : ★ rail before getting a glass container that has the new high flow injectors soaking in      ((Marcus Wilburn))
  196. [2020-01-20 09:25:17] [Output] : ★ gasoline in it.      ((Marcus Wilburn))
  197. [2020-01-20 09:25:50] [Output] : ★ Marcus Wilburn takes out the new injectors and applies the rubber seals to the tip before fitting them in
  198. [2020-01-20 09:26:09] [Output] : ★ the holes from the fuel rail and applying some pressure until they stop.      ((Marcus Wilburn))
  199. [2020-01-20 09:26:38] [Output] : ★ Marcus Wilburn grabs the fuel rail with the new injectors installed on it, he eases it back in place with
  200. [2020-01-20 09:27:00] [Output] : ★ the new injectors inside the holes on the intake manifold, he watches for the sprayer      ((Marcus Wilburn))
  201. [2020-01-20 09:27:17] [Output] : ★ tips while doing so as they tend to be squishy.      ((Marcus Wilburn))
  202. [2020-01-20 09:27:41] [Output] : ★ Marcus Wilburn hands tightening the three nuts that secure the fuel rail in place and grabs the ratchet
  203. [2020-01-20 09:28:29] [Output] : ★ with the 10mm socket on it, he starts tightening the said nuts until they're snug.      ((Marcus Wilburn))
  204. [2020-01-20 09:29:03] [Output] : ★ Marcus Wilburn grabs the nut and washer from the fuel return line and fits it back on the return port
  205. [2020-01-20 09:29:28] [Output] : ★ from the fuel rack, using the adjustable wrench to fasten the nut until the hose is      ((Marcus Wilburn))
  206. [2020-01-20 09:29:34] [Output] : ★ firmly secured to the rail.      ((Marcus Wilburn))
  207. [2020-01-20 09:29:55] [Output] : ★ Marcus Wilburn grabs the fuel feed line and plugs it to the fuel rail, using the nut and washer from
  208. [2020-01-20 09:30:22] [Output] : ★ earlier to secure them as he tightens them with the 10mm socket fitted on his ratchet.      ((Marcus Wilburn))
  209. [2020-01-20 09:34:04] [Output] : ★ Marcus Wilburn reconnects the wire harnesses to the new injectors as he makes sure they're all
  210. [2020-01-20 09:34:17] [Output] : ★ plugged in properly, slightly shaking them to make sure.      ((Marcus Wilburn))
  211. [2020-01-20 10:00:18] [Output] : ★ Marcus Wilburn grabs a bottle of the usual engine oil and takes off the engine's oil cap before inserting
  212. [2020-01-20 10:00:29] [Output] : ★ a funnel in the hole and pouring the fresh oil inside.      ((Marcus Wilburn))
  213. [2020-01-20 10:04:07] [Output] : ★ Marcus Wilburn pulls the oil gauge to see if he needs to pour more oil in before inserting the gauge back
  214. [2020-01-20 10:04:22] [Output] : ★ in and putting the oil cap back on.      ((Marcus Wilburn))
  215. [2020-01-20 10:04:58] [Output] : ★ Marcus Wilburn puts the engine oil bottle aside and shuts the hood.
  216. [2020-01-20 10:21:27] [Output] : ★ Marcus Wilburn opens the driver door and leans inside the Honda as he disengages the parking brake.
  217. [2020-01-20 10:21:47] [Output] : ★ Marcus Wilburn jumps out of the car and lays his palms on the trunk before starting to push the Civic
  218. [2020-01-20 10:22:12] [Output] : ★ in order to get the front wheels between the dyno's rollers.      ((Marcus Wilburn))
  219. [2020-01-20 10:22:40] [Output] : ★ Marcus Wilburn grabs the mouse and starts up the dyno software before pressing on the lift menu
  220. [2020-01-20 10:22:55] [Output] : ★ and selecting the "lower" option in order to lower the front wheels and get them between the      ((Marcus Wilburn))
  221. [2020-01-20 10:23:01] [Output] : ★ rollers.      ((Marcus Wilburn))
  222. [2020-01-20 10:23:46] [Output] : ★ Marcus Wilburn grabs the hook of the left axle strap before wrapping it around the rear left axle and securing
  223. [2020-01-20 10:24:01] [Input]  : do it in place before tightening it as much as he could.
  224. [2020-01-20 10:24:01] [Output] : ★ it in place before tightening it as much as he could.      ((Marcus Wilburn))
  225. [2020-01-20 10:24:13] [Input]  : me grabs the right axle strap and hooks it around the right rear axle before securing it
  226. [2020-01-20 10:24:13] [Output] : ★ Marcus Wilburn grabs the right axle strap and hooks it around the right rear axle before securing it
  227. [2020-01-20 10:24:29] [Input]  : do to the mechanism in order to tighten it and lock it in place.
  228. [2020-01-20 10:24:29] [Output] : ★ to the mechanism in order to tighten it and lock it in place.      ((Marcus Wilburn))
  229. [2020-01-20 10:24:48] [Input]  : me opens the driver door and pulls the hood release handle.
  230. [2020-01-20 10:24:48] [Output] : ★ Marcus Wilburn opens the driver door and pulls the hood release handle.
  231. [2020-01-20 10:25:05] [Input]  : me slides his fingers under the hood and lifts it up before applying the hood prop.
  232. [2020-01-20 10:25:05] [Output] : ★ Marcus Wilburn slides his fingers under the hood and lifts it up before applying the hood prop.
  233. [2020-01-20 10:25:28] [Output] : ★ Marcus Wilburn grabs ahold of the inductive RPM pickup sensor and locks it around the spark plug wire.
  234. [2020-01-20 10:26:29] [Output] : ★ Marcus Wilburn hops inside the car and uses the tip of a flat head screwdriver to pry off the carpet
  235. [2020-01-20 10:26:45] [Output] : ★ beneath the glove box, revealing the OEM ECU.      ((Marcus Wilburn))
  236. [2020-01-20 10:27:10] [Output] : ★ Marcus Wilburn uses the same screwdriver to undo the screws, he then unplugs the harnesses and
  237. [2020-01-20 10:27:24] [Output] : ★ slides the old ECU out of place as he recklessly tosses it out the window.      ((Marcus Wilburn))
  238. [2020-01-20 10:27:42] [Output] : ★ Marcus Wilburn grabs the new performance ECU and puts it in place as he secures it using the screws
  239. [2020-01-20 10:27:51] [Output] : ★ prior to reconnecting the harnesses.      ((Marcus Wilburn))
  240. [2020-01-20 10:28:19] [Output] : ★ Marcus Wilburn grabs the laptop and gets in the driver seat as he places it on his lap.
  241. [2020-01-20 10:28:32] [Output] : ★ Marcus Wilburn unfolds the laptop and presses on the start up button to start it.
  242. [2020-01-20 10:28:51] [Output] : ★ Marcus Wilburn opens the dyno software along with the AEMTuner software as he grabs an OBD2 to USB
  243. [2020-01-20 10:31:19] [Output] : ★ cable, plugging the OBD2 end into the OBD2 port under the driver side of the dashboard and      ((Marcus Wilburn))
  244. [2020-01-20 10:31:34] [Output] : ★ the USB to the laptop.      ((Marcus Wilburn))
  245. [2020-01-20 10:31:49] [Output] : ★ Marcus Wilburn presses on the drop down menu reading "File" and presses on "Connect to car."
  246. [2020-01-20 10:32:11] [Output] : ★ The AEMTuner software would detect the Honda's ECU and establish connection.      ((Marcus Wilburn))
  247. [2020-01-20 10:32:25] [Output] : ★ Marcus Wilburn presses on the "File" drop down menu and selects "Open calibration" before browsing to
  248. [2020-01-20 10:32:51] [Output] : ★ the Honda's calibrations folder and opening the Civic's file.      ((Marcus Wilburn))
  249. [2020-01-20 10:33:11] [Output] : ★ Marcus Wilburn clicks on the "Ignition" map with a spark plug icon before pressing on shift and selecting
  250. [2020-01-20 10:33:52] [Output] : ★ all the cases starting from 500RPM to 6000RPM as he then right clicks and presses on      ((Marcus Wilburn))
  251. [2020-01-20 10:34:09] [Output] : ★ "Add value" and adding a negative value to decrease ignition timing values in order to      ((Marcus Wilburn))
  252. [2020-01-20 10:34:15] [Output] : ★ avoid knock.      ((Marcus Wilburn))
  253. [2020-01-20 10:34:48] [Output] : ★ Marcus Wilburn presses on the fuel map with a fuel injector icon prior to selecting all the cases and
  254. [2020-01-20 10:35:02] [Output] : ★ choosing the "Add value" option in order to increase the amount of fuel injected into      ((Marcus Wilburn))
  255. [2020-01-20 10:35:07] [Output] : ★ the cylinders.      ((Marcus Wilburn))
  256. [2020-01-20 10:35:29] [Output] : ★ Marcus Wilburn would click on the "Boost" map with a turbocharger icon, selecting all the cases
  257. [2020-01-20 10:36:19] [Output] : ★ as he right clicks chooses add value to increase the boost pressure values.      ((Marcus Wilburn))
  258. [2020-01-20 10:36:38] [Output] : ★ Marcus Wilburn puts the key in the ignition and turns it clockwise as he awaits to hear the fuel pump
  259. [2020-01-20 10:36:45] [Output] : ★ engage before trying to start the car up.      ((Marcus Wilburn))
  260. [2020-01-20 10:36:59] [Output] : ((OOC Luck)) Marcus Wilburn tries their luck from 1 to 100 and gets 32.
  261. [2020-01-20 10:37:02] [Output] : ((OOC Chance at 32%)) Marcus Wilburn's attempt has failed.
  262. [2020-01-20 10:37:18] [Output] : ★ Marcus Wilburn takes the key out of the ignition and reinserts it, turning to the ON position and awaiting
  263. [2020-01-20 10:37:41] [Output] : ★ for the fuel pump to establish a steady flow within the dry lines of the fuel rail.      ((Marcus Wilburn))
  264. [2020-01-20 10:38:06] [Output] : ★ Marcus Wilburn starts the engine as he smirks.
  265. [2020-01-20 10:38:22] [Output] : ★ Marcus Wilburn alt tabs to the dyno software and clicks on the file menu before choosing new run.
  266. [2020-01-20 10:38:46] [Output] : ★ Marcus Wilburn floors the gas pedal and keeps his eyes on the gauges displayed on the laptop's screen
  267. [2020-01-20 10:39:01] [Output] : ★ in order to monitor all the data logged from the ECU.      ((Marcus Wilburn))
  268. [2020-01-20 10:39:32] [Output] : ★ Marcus Wilburn lets go of the accelerator pedal and awaits for the car to idle before turning the engine
  269. [2020-01-20 10:39:56] [Output] : ★ off and going through the results as he bobs his head, clearly interested in the results.      ((Marcus Wilburn))
  270. [2020-01-20 10:40:38] [Output] : ★ Marcus Wilburn alt tabs back in the AEMTuner application and tweaks the values a bit as he goes for a
  271. [2020-01-20 10:41:01] [Output] : ★ second run to improve the results, he flashes the map to the ECU and turns off the      ((Marcus Wilburn))
  272. [2020-01-20 10:41:21] [Output] : ★ laptop, he starts undoing the straps tying the vehicle down with a rather proud      ((Marcus Wilburn))
  273. [2020-01-20 10:41:25] [Output] : ★ smile on his face.      ((Marcus Wilburn))
  274. [2020-01-20 10:41:40] [Output] : ★ Marcus Wilburn gets the car out of the garage and takes it out for a spin, he breaks in the new
  275. [2020-01-20 10:41:52] [Output] : ★ turbo, not pushing to the limits just yet.      ((Marcus Wilburn))
  276. [2020-01-20 10:44:05] [Output] : ★ Marcus Wilburn randomly pulls over and hops out as he pops open the trunk.
  277. [2020-01-20 10:44:27] [Output] : ★ Marcus Wilburn grabs the spare tire and recklessly tosses it on the side of the road as he cackles.
  278. [2020-01-20 10:44:32] [Output] :  [English] Marcus Wilburn says: Weight reduction nigga.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top