Guest User

s905x3

a guest
Jan 25th, 2020
791
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
  2. bl2_stage_init 0x01
  3. bl2_stage_init 0x81
  4. hw id: 0x0000 - pwm id 0x01
  5. bl2_stage_init 0xc1
  6. bl2_stage_init 0x02
  7.  
  8. L0:00000000
  9. L1:00000703
  10. L2:00008067
  11. L3:15000020
  12. S1:00000000
  13. B2:20282000
  14. B1:a0f83180
  15.  
  16. TE: 243998
  17.  
  18. BL2 Built : 20:29:41, Jun 18 2019. g12a ga659aac - luan.yuan@droid15-sz
  19.  
  20. Board ID = 1
  21. Set cpu clk to 24M
  22. Set clk81 to 24M
  23. Use GP1_pll as DSU clk.
  24. DSU clk: 1200 Mhz
  25. CPU clk: 1200 MHz
  26. Set clk81 to 166.6M
  27. eMMC boot @ 0
  28. sw8 s
  29. DDR driver_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:37
  30. board id: 1
  31. Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part : 0
  32. fw parse done
  33. Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
  34. Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
  35. PIEI prepare done
  36. fastboot data load
  37. 00000000
  38. emmc switch 1 ok
  39. ddr saved addr:00016000
  40. Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000 , part: 0
  41. 00000000
  42. emmc switch 0 ok
  43. fastboot data verify
  44. verify result: 255
  45. Cfg max: 5, cur: 1. Board id: 255. Force loop cfg
  46. DDR4 probe
  47. ddr clk to 1200MHz
  48. Load ddrfw from eMMC, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
  49.  
  50. dmc_version 0001
  51. Check phy result
  52. INFO : End of initialization
  53. INFO : ERROR : Training has failed!
  54. 1D training failed
  55. Cfg max: 5, cur: 2. Board id: 255. Force loop cfg
  56. DDR3 probe
  57. ddr clk to 912MHz
  58. Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  59.  
  60. dmc_version 0001
  61. Check phy result
  62. INFO : End of initialization
  63. INFO : ERROR : Training has failed!
  64. 1D training failed
  65. Cfg max: 5, cur: 3. Board id: 255. Force loop cfg
  66. LPDDR4 probe
  67. ddr clk to 1392MHz
  68. Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  69.  
  70. dmc_version 0001
  71. Check phy result
  72. INFO : End of CA training
  73. INFO : End of initialization
  74. INFO : Training has run successfully!
  75. Check phy result
  76. INFO : End of initialization
  77. INFO : End of read enable training
  78. INFO : End of fine write leveling
  79. INFO : End of Write leveling coarse delay
  80. INFO : Training has run successfully!
  81. Check phy result
  82. INFO : End of initialization
  83. INFO : End of read dq deskew training
  84. INFO : End of MPR read delay center optimization
  85. INFO : End of write delay center optimization
  86. INFO : End of read delay center optimization
  87. INFO : End of max read latency training
  88. INFO : Training has run successfully!
  89. 1D training succeed
  90. Load ddrfw from eMMC, src: 0x00048200, des: 0xfffd0000, size: 0x0000c000, part: 0
  91. Check phy result
  92. INFO : End of initialization
  93. INFO : End of 2D read delay Voltage center optimization
  94. INFO : End of 2D read delay Voltage center optimization
  95. INFO : End of 2D write delay Voltage center optimization
  96. INFO : End of 2D write delay Voltage center optimization
  97. INFO : Training has run successfully!
  98.  
  99. channel==0
  100. RxClkDly_Margin_A0==100 ps 9
  101. TxDqDly_Margin_A0==89 ps 8
  102. RxClkDly_Margin_A1==100 ps 9
  103. TxDqDly_Margin_A1==78 ps 7
  104. TrainedVREFDQ_A0==78
  105. TrainedVREFDQ_A1==78
  106. VrefDac_Margin_A0==25
  107. DeviceVref_Margin_A0==35
  108. VrefDac_Margin_A1==24
  109. DeviceVref_Margin_A1==36
  110.  
  111.  
  112. channel==1
  113. RxClkDly_Margin_A0==89 ps 8
  114. TxDqDly_Margin_A0==100 ps 9
  115. RxClkDly_Margin_A1==89 ps 8
  116. TxDqDly_Margin_A1==89 ps 8
  117. TrainedVREFDQ_A0==84
  118. TrainedVREFDQ_A1==82
  119. VrefDac_Margin_A0==22
  120. DeviceVref_Margin_A0==30
  121. VrefDac_Margin_A1==21
  122. DeviceVref_Margin_A1==32
  123.  
  124. dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
  125.  
  126. soc_vref_reg_value 0x 0000001d 0000001d 0000001f 0000001d 0000001c 0000001c 0000 001d 0000001d 0000001b 0000001b 0000001c 0000001b 0000001b 0000001b 0000001a 000 0001b 0000001b 0000001b 0000001b 00000019 00000019 0000001c 0000001e 0000001d 00 00001d 0000001d 0000001e 0000001b 0000001b 0000001c 0000001e 0000001b dram_vref_ reg_value 0x 00000063
  127. 2D training succeed
  128. aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:43
  129. auto size-- 65535DDR cs0 size: 1024MB
  130. DDR cs1 size: 1024MB
  131. DMC_DDR_CTRL: 00e0001bDDR size: 2048MB
  132. cs0 DataBus test pass
  133. cs1 DataBus test pass
  134. cs0 AddrBus test pass
  135. cs1 AddrBus test pass
  136.  
  137. non-sec scramble use zero key
  138. ddr scramble enabled
  139.  
  140. 100bdlr_step_size ps== 454
  141. result report
  142. boot times 0Enable ddr reg access
  143. 00000000
  144. emmc switch 3 ok
  145. BL2: rpmb counter: 0x00000039
  146. 00000000
  147. emmc switch 0 ok
  148. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part : 0
  149. Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x00108000, part: 0
  150. bl2z: ptr: 05129330, size: 00001e40
  151. 0.0;M3 CHK:0;cm4_sp_mode 0
  152. MVN_1=0x00000000
  153. MVN_2=0x00000000
  154. [Image: g12a_v1.1.3389-92241b5 2019-07-02 17:22:49 luan.yuan@droid15-sz]
  155. OPS=0x10
  156. ring efuse init
  157. 2b 0c 10 00 01 05 0c 00 00 0c 38 31 53 4b 50 50
  158. [0.017354 Inits done]
  159. secure task start!
  160. high task start!
  161. low task start!
  162. run into bl31
  163. NOTICE: BL31: v1.3(release):4fc40b1
  164. NOTICE: BL31: Built : 15:57:33, May 22 2019
  165. NOTICE: BL31: G12A normal boot!
  166. NOTICE: BL31: BL33 decompress pass
  167. INFO: BL3-2: ATOS-V2.4.2-13-gc341bc0 #1 Thu Jun 27 19:33:34 2019 +0800 arm
  168. INFO: BL3-2: Chip: SM1 Rev: C (2B:C - 10:2)
  169. INFO: BL3-2: crypto engine DMA
  170. INFO: BL3-2: secure time TEE
  171. INFO: BL3-2: CONFIG_DEVICE_SECURE 0xb200000e
  172.  
  173.  
  174. U-Boot 2015.01 (Jan 03 2020 - 16:24:37)
  175.  
  176. DRAM: 2 GiB
  177. Relocation Offset is: 76e5f000
  178. spi_post_bind(spifc): req_seq = 0
  179. register usb cfg[0][1] = 0000000077f3f330
  180. NAND: get_sys_clk_rate_mtd() 290, clock setting 200!
  181. NAND device id: 0 ff ff ff ff ff
  182. No NAND device found!!!
  183. nand init failed: -6
  184. get_sys_clk_rate_mtd() 290, clock setting 200!
  185. NAND device id: 0 ff ff ff ff ff
  186. No NAND device found!!!
  187. nand init failed: -6
  188. MMC: aml_priv->desc_buf = 0x0000000073e4fa70
  189. aml_priv->desc_buf = 0x0000000073e51db0
  190. SDIO Port B: 0, SDIO Port C: 1
  191. co-phase 0x2, tx-dly 0, clock 400000
  192. co-phase 0x2, tx-dly 0, clock 400000
  193. co-phase 0x2, tx-dly 0, clock 400000
  194. emmc/sd response timeout, cmd8, status=0x1ff2800
  195. emmc/sd response timeout, cmd55, status=0x1ff2800
  196. co-phase 0x2, tx-dly 0, clock 400000
  197. co-phase 0x2, tx-dly 0, clock 40000000
  198. aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x162000
  199. [mmc_startup] mmc refix success
  200. init_part() 297: PART_TYPE_AML
  201. [mmc_init] mmc init success
  202. Amlogic multi-dtb tool
  203. GZIP format, decompress...
  204. Multi dtb detected
  205. Multi dtb tool version: v2 .
  206. Support 4 dtbs.
  207. aml_dt soc: sm1 platform: ac213 variant: 2g
  208. dtb 0 soc: g12a plat: u212 vari: 2g
  209. dtb 1 soc: g12a plat: u212 vari: 4g
  210. dtb 2 soc: sm1 plat: ac213 vari: 2g
  211. dtb 3 soc: sm1 plat: ac213 vari: 4g
  212. Find match dtb: 2
  213. start dts,buffer=0000000073e54620,dt_addr=0000000073e54620
  214. get_partition_from_dts() 91: ret 0
  215. Amlogic multi-dtb tool
  216. Single dtb detected
  217. parts: 17
  218. 00: logo 0000000000800000 1
  219. 01: recovery 0000000001800000 1
  220. 02: misc 0000000000800000 1
  221. 03: dtbo 0000000000800000 1
  222. 04: cri_data 0000000000800000 2
  223. 05: param 0000000001000000 2
  224. 06: boot 0000000001000000 1
  225. set has_boot_slot = 0
  226. 07: rsv 0000000001000000 1
  227. 08: metadata 0000000001000000 1
  228. 09: vbmeta 0000000000200000 1
  229. 10: tee 0000000002000000 1
  230. 11: vendor 0000000020000000 1
  231. 12: odm 0000000008000000 1
  232. 13: system 0000000074000000 1
  233. 14: product 0000000008000000 1
  234. 15: cache 0000000046000000 2
  235. 16: data ffffffffffffffff 4
  236. init_part() 297: PART_TYPE_AML
  237. eMMC/TSD partition table have been checked OK!
  238. crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
  239. crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
  240. crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
  241. mmc env offset: 0x4d400000
  242. In: serial
  243. Out: serial
  244. Err: serial
  245. reboot_mode=cold_boot
  246. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  247. _verify_dtb_checksum()-3406: calc b9f39d09, store b9f39d09
  248. _verify_dtb_checksum()-3406: calc b9f39d09, store b9f39d09
  249. dtb_read()-3623: total valid 2
  250. update_old_dtb()-3604: do nothing
  251. Amlogic multi-dtb tool
  252. GZIP format, decompress...
  253. Multi dtb detected
  254. Multi dtb tool version: v2 .
  255. Support 4 dtbs.
  256. aml_dt soc: sm1 platform: ac213 variant: 2g
  257. dtb 0 soc: g12a plat: u212 vari: 2g
  258. dtb 1 soc: g12a plat: u212 vari: 4g
  259. dtb 2 soc: sm1 plat: ac213 vari: 2g
  260. dtb 3 soc: sm1 plat: ac213 vari: 4g
  261. Find match dtb: 2
  262. amlkey_init() enter!
  263. [EFUSE_MSG]keynum is 4
  264. vpu: clk_level in dts: 7
  265. vpu: vpu_power_on
  266. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  267. vpu: vpu_module_init_config
  268. vpp: vpp_init
  269. vpp: vpp osd2 matrix rgb2yuv..............
  270. cvbs: cpuid:0x2b
  271. Net: dwmac.ff3f0000amlkey_init() enter!
  272. amlkey_init() 71: already init!
  273. [EFUSE_MSG]keynum is 4
  274. MACADDR:02:00:00:0c:05:01(from chipid)
  275.  
  276. CONFIG_AVB2: null
  277. Start read misc partition datas!
  278. info->magic =
  279. info->version_major = 1
  280. info->version_minor = 0
  281. info->slots[0].priority = 15
  282. info->slots[0].tries_remaining = 7
  283. info->slots[0].successful_boot = 0
  284. info->slots[1].priority = 14
  285. info->slots[1].tries_remaining = 7
  286. info->slots[1].successful_boot = 0
  287. info->crc32 = -1075449479
  288. active slot = 0
  289. wipe_data=successful
  290. wipe_cache=successful
  291. upgrade_step=2
  292. reboot_mode:::: cold_boot
  293. amlkey_init() enter!
  294. amlkey_init() 71: already init!
  295. [EFUSE_MSG]keynum is 4
  296. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  297. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  298. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  299. hpd_state=0
  300. edid preferred_mode is <NULL>[0]
  301. hdr mode is 0
  302. dv mode is ver:0 len: 0
  303. hdr10+ mode is 0
  304. [OSD]load fb addr from dts:/meson-fb
  305. [OSD]load fb addr from dts:/fb
  306. [OSD]set initrd_high: 0x7f800000
  307. [OSD]fb_addr for logo: 0x7f800000
  308. [OSD]load fb addr from dts:/meson-fb
  309. [OSD]load fb addr from dts:/fb
  310. [OSD]fb_addr for logo: 0x7f800000
  311. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  312. [CANVAS]canvas init
  313. [CANVAS]addr=0x7f800000 width=3840, height=2160
  314. [OSD]osd_hw.free_dst_data: 0,719,0,575
  315. [OSD]osd1_update_disp_freescale_enable
  316. vpp: vpp_matrix_update: 2
  317. cvbs performance type = 9, table = 0
  318. cvbs_config_hdmipll_g12a
  319. cvbs_set_vid2_clk
  320. vpp: sdr_mode = 2
  321. vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
  322. amlkey_init() enter!
  323. amlkey_init() 71: already init!
  324. [EFUSE_MSG]keynum is 4
  325. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  326. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  327. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  328. gpio: pin GPIOAO_3 (gpio 3) value is 1
  329. Command: bcb uboot-command
  330. Start read misc partition datas!
  331. BCB hasn't any datas,exit!
  332. amlkey_init() enter!
  333. amlkey_init() 71: already init!
  334. [EFUSE_MSG]keynum is 4
  335. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  336. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  337. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  338. Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
  339. Unknown command 'ddr_auto_fast_boot_check' - try 'help'
  340. pll tsensor avg: 0x1d41, u_efuse: 0x8067
  341. temp1: 15
  342. ddr tsensor avg: 0x1d24, u_efuse: 0x8001
  343. temp2: 15
  344. device cool done
  345. CONFIG_SYSTEM_AS_ROOT: systemroot
  346. system_mode: 1
  347. Start read misc partition datas!
  348. info->magic =
  349. info->version_major = 1
  350. info->version_minor = 0
  351. info->slots[0].priority = 15
  352. info->slots[0].tries_remaining = 7
  353. info->slots[0].successful_boot = 0
  354. info->slots[1].priority = 14
  355. info->slots[1].tries_remaining = 7
  356. info->slots[1].successful_boot = 0
  357. info->crc32 = -1075449479
  358. active slot = 0
  359. CONFIG_AVB2: null
  360. active_slot: normal
  361. avb2: 0
  362. ee_gate_off ...
  363. avb2: 0
  364. ## Booting Android Image at 0x01080000 ...
  365. Kernel command line: androidboot.dtbo_idx=0 vmalloc=512m --cmdline root=/dev/mmc blk0p18 buildvariant=user
  366. Start read misc partition datas!
  367. info->magic =
  368. info->version_major = 1
  369. info->version_minor = 0
  370. info->slots[0].priority = 15
  371. info->slots[0].tries_remaining = 7
  372. info->slots[0].successful_boot = 0
  373. info->slots[1].priority = 14
  374. info->slots[1].tries_remaining = 7
  375. info->slots[1].successful_boot = 0
  376. info->crc32 = -1075449479
  377. active slot = 0
  378. active_slot is normal
  379. load dtb from 0x1000000 ......
  380. Amlogic multi-dtb tool
  381. Single dtb detected
  382. find 1 dtbos
  383. dtbos to be applied: 0
  384. Apply dtbo 0
  385. Loading Kernel Image(COMP_NONE) ... OK
  386. kernel loaded at 0x01080000, end = 0x019bc820
  387. libfdt fdt_getprop(): FDT_ERR_NOTFOUND
  388. Loading Device Tree to 0000000009fe7000, end 0000000009fff6aa ... OK
  389.  
  390. Starting kernel ...
  391.  
  392. uboot time: 3636511 us
  393. [ 0.000000@0] Booting Linux on physical CPU 0x0
  394. [ 0.000000@0] Linux version 4.9.113 (superceleron@superserver) (gcc version 6 .3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Fri Jan 3 16:51:12 WET 2 020
  395. [ 0.000000@0] CPU: ARMv7 Processor [411fd050] revision 0 (ARMv7), cr=10c5383d
  396. [ 0.000000@0] CPU: div instructions available: patching division code
  397. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruct ion cache
  398. [ 0.000000@0] OF: fdt:Machine model: Amlogic
  399. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x05000000, size 36 MiB
  400. [ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
  401. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x7f800000, size 8 MiB
  402. [ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible i d shared-dma-pool
  403. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x77800000, size 12 8 MiB
  404. [ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
  405. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x75000000, size 40 MiB
  406. [ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
  407. [ 0.000000@0] Reserved memory: regions without no-map are not yet supported
  408. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x61c00000, size 30 8 MiB
  409. [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatib le id shared-dma-pool
  410. [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, com patible id amlogic, codec-mm-reserved
  411. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x5dc00000, size 64 MiB
  412. [ 0.000000@0] OF: reserved mem: initialized node linux,vdin1_cma, compatible id shared-dma-pool
  413. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x5bc00000, size 32 MiB
  414. [ 0.000000@0] OF: reserved mem: initialized node linux,vm0_cma, compatible id shared-dma-pool
  415. [ 0.000000@0] cma: Reserved 8 MiB at 0x5b400000
  416. [ 0.000000@0] Memory policy: Data cache writealloc
  417. [ 0.000000@0] psci: probing for conduit method from DT.
  418. [ 0.000000@0] psci: PSCIv1.0 detected in firmware.
  419. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
  420. [ 0.000000@0] psci: Trusted OS migration not required
  421. [ 0.000000@0] psci: SMC Calling Convention v1.1
  422. [ 0.000000@0] percpu: Embedded 15 pages/cpu @de770000 s32140 r8192 d21108 u61 440
  423. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total p ages: 523280
  424. [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console _suspend earlyprintk=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size =0x8000 ramoops.console_size=0x4000 otg_device=0 reboot_mode_android=normal logo =osd0,loaded,0x3d800000 vout=576cvbs,enable panel_type=lcd_1 hdmitx=,444,8bit hd mimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_revers e=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.fi rstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.serialno=1234567 890 ro rootwait skip_initramfs androidboot.dtbo_idx=0 vmalloc=512m --cmdline roo t=/dev/mmcblk0p18 buildvariant=user
  425. [ 0.000000@0] fb: osd0
  426. [ 0.000000@0] fb: loaded
  427. [ 0.000000@0] fb: 0x3d800000
  428. [ 0.000000@0] vout: 576cvbs
  429. [ 0.000000@0] vout: enable: 1
  430. [ 0.000000@0] lcd: panel_type: lcd_1
  431. [ 0.000000@0] vout: get hdmimode: 1080p60hz
  432. [ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1
  433. [ 0.000000@0] vout: get cvbsmode: 576cvbs
  434. [ 0.000000@0] vpp_axis_reverse: bootargs is 0
  435. [ 0.000000@0] phlock_phase_config: bootargs is 0.
  436. [ 0.000000@0] jtag: jtag select disable
  437. [ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)
  438. [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  439. [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  440. [ 0.000000@0] Memory: 1415580K/2097152K available (14336K kernel code, 1269K rwdata, 4880K rodata, 1024K init, 1342K bss, 42596K reserved, 638976K cma-reserv ed, 978944K highmem)
  441. [ 0.000000@0] Virtual kernel memory layout:
  442. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  443. [ 0.000000@0] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  444. [ 0.000000@0] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
  445. [ 0.000000@0] lowmem : 0xc0000000 - 0xdf800000 ( 504 MB)
  446. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  447. [ 0.000000@0] modules : 0xbc000000 - 0xbfe00000 ( 62 MB)
  448. [ 0.000000@0] .text : 0xc0108000 - 0xc1000000 (15328 kB)
  449. [ 0.000000@0] .init : 0xc1600000 - 0xc1700000 (1024 kB)
  450. [ 0.000000@0] .data : 0xc1700000 - 0xc183d6f8 (1270 kB)
  451. [ 0.000000@0] .bss : 0xc183f000 - 0xc198ebc4 (1343 kB)
  452. [ 0.000000@0] zone:Normal, spaned pages:129024, total:129024
  453. [ 0.000000@0] zone:HighMem, spaned pages:395264, total:524288
  454. [ 0.000000@0] page_trace_pre_work, trace buffer:de000000, size:200000, used:d e200000, end:de200000
  455. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  456. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  457. [ 0.000000@0] Build-time adjustment of leaf fanout to 32.
  458. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  459. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
  460. [ 0.000000@0] NR_IRQS:16 nr_irqs:16 16
  461. [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  462. [ 0.000000@0] g12a_aoclkc_init: register ao clk ok!
  463. [ 0.000000@0] Meson chip version = RevC (2B:C - 10:0)
  464. [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  465. [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  466. [ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk
  467. [ 0.000000@0] meson_g12a_media_init: register meson media clk
  468. [ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
  469. [ 0.000000@0] meson_g12a_misc_init: done.
  470. [ 0.000000@0] g12a_clkc_init initialization complete
  471. [ 0.000000@0] sm1 clk probe ok
  472. [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz ( virt).
  473. [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycle s: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  474. [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 439 8046511097ns
  475. [ 0.000013@0] Switching to timer-based delay loop, resolution 41ns
  476. [ 0.000048@0] meson_bc_timer: mclk->mux_reg =e000c190,mclk->reg =e000e194
  477. [ 0.000645@0] Console: colour dummy device 80x30
  478. [ 0.000665@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  479. [ 0.000677@0] pid_max: default: 32768 minimum: 301
  480. [ 0.000740@0] thread_stack_cache_init, vmap:de223900, bitmap:de228400, cache page:5b000
  481. [ 0.000751@0] thread_stack_cache_init, allocation vm area:de225040, addr:bc00 0000, size:3001000
  482. [ 0.000794@0] Security Framework initialized
  483. [ 0.000804@0] SELinux: Initializing.
  484. [ 0.000876@0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  485. [ 0.000889@0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes )
  486. [ 0.001527@0] CPU: Testing write buffer coherency: ok
  487. [ 0.001559@0] ftrace: allocating 44133 entries in 130 pages
  488. [ 0.074861@0] sched-energy: CPU device node has no sched-energy-costs
  489. [ 0.074879@0] CPU0: update cpu_capacity 1024
  490. [ 0.074886@0] CPU0: thread 0, cpu 0, socket 0, mpidr 81000000
  491. [ 0.074914@0] Setting up static identity map for 0x200000 - 0x200058
  492. [ 0.118801@0] secmon: can't fine clear_range
  493. [ 0.167563@1] CPU1: update cpu_capacity 1024
  494. [ 0.167568@1] CPU1: thread 0, cpu 1, socket 0, mpidr 81000100
  495. [ 0.199648@2] CPU2: update cpu_capacity 1024
  496. [ 0.199651@2] CPU2: thread 0, cpu 2, socket 0, mpidr 81000200
  497. [ 0.231765@3] CPU3: update cpu_capacity 1024
  498. [ 0.231769@3] CPU3: thread 0, cpu 3, socket 0, mpidr 81000300
  499. [ 0.231867@0] Brought up 4 CPUs
  500. [ 0.231892@0] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  501. [ 0.231898@0] CPU: All CPU(s) started in SVC mode.
  502. [ 0.232517@0] addr:bc045cce is in kernel, size fix 4096->10, data:mode=0755
  503. [ 0.232636@0] devtmpfs: initialized
  504. [ 0.257762@0] VFP support v0.3: implementor 41 architecture 3 part 40 variant 5 rev 2
  505. [ 0.258240@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  506. [ 0.258262@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  507. [ 0.258436@0] pinctrl core: initialized pinctrl subsystem
  508. [ 0.259582@0] NET: Registered protocol family 16
  509. [ 0.262480@0] DMA: preallocated 256 KiB pool for atomic coherent allocations
  510. [ 0.262489@0] schedtune: init normalization constants...
  511. [ 0.262494@0] schedtune: no energy model data
  512. [ 0.262499@0] schedtune: disabled!
  513. [ 0.275429@0] cpuidle: using governor menu
  514. [ 0.275529@0] register canvas platform driver
  515. [ 0.275576@0] register rdma platform driver
  516. [ 0.275640@0] aml_vdac_init: module init
  517. [ 0.278492@0] clkmsr: clkmsr: driver init
  518. [ 0.278500@0] codec_mm_module_init
  519. [ 0.278548@0] media_configs_system_init
  520. [ 0.279016@0] pstore: using zlib compression
  521. [ 0.279576@0] console [pstore-1] enabled
  522. [ 0.279612@0] pstore: Registered ramoops as persistent store backend
  523. [ 0.279621@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
  524. [ 0.279630@0] ramoops: ramoops_io_en:0 1 old:0x0 ftrace_size:0x40000
  525. [ 0.281660@0] aml_iomap: amlogic iomap probe done
  526. [ 0.282239@0] vpu: driver version: v20190314(10-sm1)
  527. [ 0.282252@0] vpu: load vpu_clk: 666666667Hz(7)
  528. [ 0.282440@0] vpu: clktree_init
  529. [ 0.282522@0] vpu: vpu_probe OK
  530. [ 0.286815@0] clkmsr: msr_clk_reg0=e01c0004,msr_clk_reg2=e01c200c
  531. [ 0.286834@0] clkmsr: msr_ring_reg0=e01c45fc
  532. [ 0.293343@0] aml_vdac_probe:probe start.cpu_id:8,name:meson-sm1-vdac
  533. [ 0.293553@0] aml_vdac_probe: ok
  534. [ 0.293725@0] canvas_probe reg=ff638000,size=2000
  535. [ 0.293747@0] canvas maped reg_base =e01c6000
  536. [ 0.302233@0] rdma_probe,cpu_type:1, ver:0, len:8
  537. [ 0.302457@0] rdma_register, rdma_table_addr e01e9000 rdma_table_addr_phy 5b4 40000 reg_buf dda10000
  538. [ 0.302467@0] rdma_register success, handle 1 table_size 32768
  539. [ 0.302475@0] set_rdma_handle video rdma handle = 1.
  540. [ 0.303779@0] aml_snd_reg_map[0], reg:ff661000, size:400
  541. [ 0.303799@0] aml_snd_reg_map[1], reg:ff660000, size:1000
  542. [ 0.303816@0] aml_snd_reg_map[2], reg:ff661400, size:400
  543. [ 0.303832@0] aml_snd_reg_map[3], reg:ff662000, size:1000
  544. [ 0.303847@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
  545. [ 0.303874@0] aml_snd_reg_map[5], reg:ff661800, size:400
  546. [ 0.303890@0] aml_snd_reg_map[6], reg:ff663800, size:30
  547. [ 0.303905@0] aml_snd_reg_map[7], reg:ff663c00, size:20
  548. [ 0.303922@0] aml_snd_reg_map[8], reg:ff663e00, size:10
  549. [ 0.303930@0] amlogic auge_snd_iomap probe done
  550. [ 0.306190@0] cvbs_out: cvbsout_probe, cpu_id:7,name:meson-sm1-cvbsout
  551. [ 0.306212@0] cvbs_out: clk path:0
  552. [ 0.306220@0] cvbs_out: error: failed to get vdac_config
  553. [ 0.306383@0] vout: vout1: register server: cvbs_vout_server
  554. [ 0.306392@0] cvbs_out: register cvbs module server ok
  555. [ 0.306400@0] vout: vout2: register server: cvbs_vout2_server
  556. [ 0.306407@0] cvbs_out: register cvbs module vout2 server ok
  557. [ 0.306417@0] cvbs_out: chrdev devno 264241152 for disp
  558. [ 0.306629@0] cvbs_out: create cdev cvbs
  559. [ 0.306639@0] cvbs_out: cvbsout_probe OK
  560. [ 0.307279@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm _cma
  561. [ 0.307376@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm _cma
  562. [ 0.307385@0] codec_mm_probe ok
  563. [ 0.562271@0] vgaarb: loaded
  564. [ 0.562577@0] SCSI subsystem initialized
  565. [ 0.562901@0] usbcore: registered new interface driver usbfs
  566. [ 0.562974@0] usbcore: registered new interface driver hub
  567. [ 0.563066@0] usbcore: registered new device driver usb
  568. [ 0.563266@0] Linux video capture interface: v2.00
  569. [ 0.563401@0] pps_core: LinuxPPS API ver. 1 registered
  570. [ 0.563410@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Gio metti <giometti@linux.it>
  571. [ 0.563444@0] PTP clock support registered
  572. [ 0.564177@0] secmon: reserve_mem_size:0x2300000
  573. [ 0.564270@0] secmon secmon: assigned reserved memory node linux,secmon
  574. [ 0.565765@0] secmon: get page:de887000, 5000
  575. [ 0.565781@0] secmon: share in base: 0xc50fe000, share out base: 0xc50ff000
  576. [ 0.565789@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
  577. [ 0.566316@0] fb: osd_init_module
  578. [ 0.566770@0] fb: viu vsync irq: 57
  579. [ 0.566788@0] fb: viu2 vsync irq: 65
  580. [ 0.566902@0] 0x000000d8:Y=d8,U=0,V=0
  581. [ 0.566911@0] 0x000000d9:Y=d9,U=0,V=0
  582. [ 0.566918@0] 0x000000da:Y=da,U=0,V=0
  583. [ 0.566926@0] 0x000000db:Y=db,U=0,V=0
  584. [ 0.566933@0] 0x000000dc:Y=dc,U=0,V=0
  585. [ 0.566940@0] 0x000000dd:Y=dd,U=0,V=0
  586. [ 0.567300@0] fb: osd_rdma_init: rdma_table p=0x5b448000,op=0x5b448000 , v=0x e02d3000
  587. [ 0.567341@0] rdma_register, rdma_table_addr e02d5000 rdma_table_addr_phy 5b4 49000 reg_buf ddb1f000
  588. [ 0.567350@0] rdma_register success, handle 2 table_size 4096
  589. [ 0.567358@0] fb: osd_rdma_init:osd rdma handle = 2.
  590. [ 0.567374@0] fb: mem_size: 0x800000
  591. [ 0.567381@0] fb: mem_size: 0x1980000
  592. [ 0.567387@0] fb: mem_size: 0x100000
  593. [ 0.567394@0] fb: mem_size: 0x100000
  594. [ 0.567400@0] fb: mem_size: 0x800000
  595. [ 0.567459@0] meson-fb fb: assigned reserved memory node linux,meson-fb
  596. [ 0.567469@0] fb: reserved memory base:0x7f800000, size:800000
  597. [ 0.567858@0] vout: error: invalid vinfo1. current vmode is not supported
  598. [ 0.567870@0] fb: init fbdev bpp is:32
  599. [ 0.569482@0] fb: set osd0 reverse as NONE
  600. [ 0.569502@0] vout: error: invalid vinfo1. current vmode is not supported
  601. [ 0.576706@0] fb: osd probe OK
  602. [ 0.577477@0] hdmitx: system: amhdmitx_probe start
  603. [ 0.577486@0] hdmitx: system: Ver: 20190624
  604. [ 0.577517@0] hdmitx: system: hdmitx_device.chip_type : 12
  605. [ 0.577553@0] hdmitx: system: not find match pwr-ctl
  606. [ 0.577591@0] hdmitx: system: not find drm_amhdmitx
  607. [ 0.577616@0] hdmitx: system: hpd irq = 50
  608. [ 0.577712@0] hdmitx: system: hdcp22_tx_skp failed to probe
  609. [ 0.577722@0] hdmitx: system: hdcp22_tx_esm failed to probe
  610. [ 0.578236@0] vout: vout1: register server: hdmitx_vout_server
  611. [ 0.578247@0] vout: vout2: register server: hdmitx_vout2_server
  612. [ 0.578962@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  613. [ 0.578984@0] hdmitx: hdmitx20: Mapped PHY: 0xff634400
  614. [ 0.579003@0] hdmitx: hdmitx20: Mapped PHY: 0xff900000
  615. [ 0.579017@0] hdmitx: hdmitx20: Mapped PHY: 0xff800000
  616. [ 0.579028@0] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
  617. [ 0.579037@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  618. [ 0.579045@0] hdmitx: hdmitx20: Mapped PHY: 0xff608000
  619. [ 0.579054@0] hdmitx: hdmitx20: Mapped PHY: 0xff600000
  620. [ 0.579064@0] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
  621. [ 0.579077@0] hdmitx: hw: hdmitx_get_format:0x0
  622. [ 0.579085@0] hdmitx: hw: P_HHI_HDMI_CLK_CNTL :0x100
  623. [ 0.579092@0] hdmitx: hw: P_HHI_HDMI_PLL_CNTL :0xda0504f7
  624. [ 0.579322@0] hdmitx: hw: avmute set to 1
  625. [ 0.579331@0] hdmitx: system: fmt_attr 444,8bit
  626. [ 0.579433@0] hdmitx: system: amhdmitx_probe end
  627. [ 0.580089@0] lcd: driver version: 20181012(8-sm1)
  628. [ 0.580217@0] lcd: detect mode: tablet, fr_auto_policy: 0, key_valid: 0
  629. [ 0.580452@0] lcd: lcd_clktree_probe
  630. [ 0.580463@0] lcd: status: 0
  631. [ 0.580472@0] vout: vout1: register server: lcd_vout_server
  632. [ 0.580482@0] vout: vout2: register server: lcd_vout2_server
  633. [ 0.580491@0] lcd: lcd_get_config from dts
  634. [ 0.580505@0] lcd: no range_setting
  635. [ 0.580552@0] lcd: P070ACB_FT, mipi, 8bit, 600x1024
  636. [ 0.580570@0] lcd: pixel_clk = 49.434MHz, bit_rate = 395.472MHz
  637. [ 0.580860@0] lcd: lcd_fops_create OK
  638. [ 0.580873@0] vout: error: invalid vinfo1. current vmode is not supported
  639. [ 0.580882@0] fb: current vmode=invalid, cmd: 0x20000
  640. [ 0.580902@0] lcd: request lcd_vsync_irq successful
  641. [ 0.580918@0] lcd: request lcd_vsync2_irq successful
  642. [ 0.580926@0] lcd: lcd_probe ok
  643. [ 0.581316@0] vout: create vout attribute OK
  644. [ 0.581463@0] vout: vout_fops_create OK
  645. [ 0.581473@0] vout: vout1: register server: nulldisp_vout_server
  646. [ 0.581597@0] vout: tvout monitor interval:500(ms), timeout cnt:20
  647. [ 0.581630@0] cvbs_out: mode is 1,sync_duration_den=1,sync_duration_num=50
  648. [ 0.581658@0] cvbs_out: vdac open.0 = 0x8f6001, 0x0
  649. [ 0.581667@0]
  650. [ 0.581667@0] vdac_enable: on:1,module_sel:8
  651. [ 0.581679@0] cvbs_out: already display in uboot
  652. [ 0.581687@0] vout: init mode 576cvbs set ok
  653. [ 0.581694@0] vout: aml_tvout_mode_monitor
  654. [ 0.581711@0] vout: aml_vout_probe OK
  655. [ 0.582367@0] chip type:0x2b
  656. [ 0.582723@0] NO valid ramdump args:0 0
  657. [ 0.584942@2] Advanced Linux Sound Architecture Driver Initialized.
  658. [ 0.585628@2] Bluetooth: Core ver 2.22
  659. [ 0.585720@2] NET: Registered protocol family 31
  660. [ 0.585730@2] Bluetooth: HCI device and connection manager initialized
  661. [ 0.585751@2] Bluetooth: HCI socket layer initialized
  662. [ 0.585766@2] Bluetooth: L2CAP socket layer initialized
  663. [ 0.585807@2] Bluetooth: SCO socket layer initialized
  664. [ 0.586455@2] NetLabel: Initializing
  665. [ 0.586473@2] NetLabel: domain hash size = 128
  666. [ 0.586482@2] NetLabel: protocols = UNLABELED CIPSOv4
  667. [ 0.586548@2] NetLabel: unlabeled traffic allowed by default
  668. [ 0.590009@2] clocksource: Switched to clocksource arch_sys_counter
  669. [ 0.660656@2] VFS: Disk quotas dquot_6.6.0
  670. [ 0.660737@2] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  671. [ 0.670613@0] clear:18800000, free:18800000, tick:85568 us
  672. [ 0.674236@3] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
  673. [ 0.674255@3] jtag: module init
  674. [ 0.674520@3] jtag: ao gpios not specified
  675. [ 0.674540@3] jtag: probe of jtag failed with error -22
  676. [ 0.674802@3] NET: Registered protocol family 2
  677. [ 0.675390@3] TCP established hash table entries: 4096 (order: 2, 16384 bytes )
  678. [ 0.675429@3] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  679. [ 0.675473@3] TCP: Hash tables configured (established 4096 bind 4096)
  680. [ 0.675541@3] UDP hash table entries: 256 (order: 1, 8192 bytes)
  681. [ 0.675563@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  682. [ 0.675678@3] NET: Registered protocol family 1
  683. [ 0.677420@3] wifi: power_on_pin_OD = 0;
  684. [ 0.677437@3] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
  685. [ 0.677527@3] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
  686. [ 0.677548@3] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
  687. [ 0.677558@3] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
  688. [ 0.677566@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
  689. [ 0.678340@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
  690. [ 0.678352@3] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
  691. [ 0.678362@3] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
  692. [ 0.678371@3] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
  693. [ 0.678380@3] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
  694. [ 0.678614@3] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
  695. [ 0.678704@3] aml_wifi wifi: [wifi_setup_dt] irq num is:(83)
  696. [ 0.678714@3] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
  697. [ 0.678735@3] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
  698. [ 0.681452@3] enable_pmuserenr_all() start
  699. [ 0.681471@3] enable_pmuserenr_all() end
  700. [ 0.681488@3] hw perfevents: clusterb_enabled = 0
  701. [ 0.681497@3] hw perfevents: cpumasks 0xf, 0x0
  702. [ 0.681523@3] hw perfevents: cluster A irq = 25
  703. [ 0.681599@3] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 coun ters available
  704. [ 0.685037@3] audit: initializing netlink subsys (disabled)
  705. [ 0.685099@3] audit: type=2000 audit(0.636:1): initialized
  706. [ 0.685975@3] workingset: timestamp_bits=30 max_order=19 bucket_order=0
  707. [ 0.695474@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  708. [ 0.695783@3] exFAT: Version 1.2.9
  709. [ 0.697055@3] Registering sdcardfs 0.1
  710. [ 0.697307@3] ntfs: driver 2.1.32 [Flags: R/O].
  711. [ 0.697658@3] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  712. [ 0.698525@3] fuse init (API version 7.26)
  713. [ 0.704370@3] NET: Registered protocol family 38
  714. [ 0.704390@3] Key type asymmetric registered
  715. [ 0.704399@3] Asymmetric key parser 'x509' registered
  716. [ 0.704569@3] bounce: pool size: 64 pages
  717. [ 0.704805@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
  718. [ 0.704816@3] io scheduler noop registered (default)
  719. [ 0.704825@3] io scheduler deadline registered
  720. [ 0.704854@3] io scheduler cfq registered
  721. [ 0.716037@0] random: fast init done
  722. [ 0.716089@0] random: crng init done
  723. [ 0.727337@3] brd: module loaded
  724. [ 0.733608@3] loop: module loaded
  725. [ 0.734437@3] zram: Added device: zram0
  726. [ 0.734835@3] mtdoops: mtd device (mtddev=name/number) must be supplied
  727. [ 0.735707@3] libphy: Fixed MDIO Bus: probed
  728. [ 0.736028@3] tun: Universal TUN/TAP device driver, 1.6
  729. [ 0.736038@3] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  730. [ 0.736916@3] REG0:Addr = e069c540
  731. [ 0.736935@3] auto_cali_idx 0
  732. [ 0.737407@3] meson6-dwmac ff3f0000.ethernet: no reset control found
  733. [ 0.737419@3] stmmac - user ID: 0x11, Synopsys ID: 0x37
  734. [ 0.737426@3] Ring mode enabled
  735. [ 0.737434@3] DMA HW capability register supported
  736. [ 0.737442@3] Normal descriptors
  737. [ 0.737448@3] RX Checksum Offload Engine supported
  738. [ 0.737455@3] COE Type 2
  739. [ 0.737462@3] TX Checksum insertion supported
  740. [ 0.737468@3] Wake-Up On Lan supported
  741. [ 0.737521@3] Enable RX Mitigation via HW Watchdog Timer
  742. [ 0.740233@3] libphy: stmmac: probed
  743. [ 0.740243@3] eth%d: No PHY found
  744. [ 0.767256@3] ethclk81 ff3f0000.ethernet: no reset control found
  745. [ 0.767272@3] stmmac - user ID: 0x11, Synopsys ID: 0x37
  746. [ 0.767279@3] Ring mode enabled
  747. [ 0.767287@3] DMA HW capability register supported
  748. [ 0.767294@3] Normal descriptors
  749. [ 0.767302@3] RX Checksum Offload Engine supported
  750. [ 0.767309@3] COE Type 2
  751. [ 0.767315@3] TX Checksum insertion supported
  752. [ 0.767322@3] Wake-Up On Lan supported
  753. [ 0.767329@3] Enable RX Mitigation via HW Watchdog Timer
  754. [ 0.770019@3] libphy: stmmac: probed
  755. [ 0.770029@3] eth%d: No PHY found
  756. [ 0.790316@3] PPP generic driver version 2.4.2
  757. [ 0.790551@3] PPP BSD Compression module registered
  758. [ 0.790560@3] PPP Deflate Compression module registered
  759. [ 0.790585@3] PPP MPPE Compression module registered
  760. [ 0.790593@3] NET: Registered protocol family 24
  761. [ 0.790705@3] usbcore: registered new interface driver asix
  762. [ 0.790804@3] usbcore: registered new interface driver ax88179_178a
  763. [ 0.790865@3] usbcore: registered new interface driver cdc_ether
  764. [ 0.790926@3] usbcore: registered new interface driver net1080
  765. [ 0.790985@3] usbcore: registered new interface driver cdc_subset
  766. [ 0.791043@3] usbcore: registered new interface driver zaurus
  767. [ 0.791118@3] usbcore: registered new interface driver cdc_ncm
  768. [ 0.791716@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  769. [ 0.791726@3] ehci-pci: EHCI PCI platform driver
  770. [ 0.791789@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  771. [ 0.791818@3] ohci-pci: OHCI PCI platform driver
  772. [ 0.792394@3] usbcore: registered new interface driver cdc_acm
  773. [ 0.792403@3] cdc_acm: USB Abstract Control Model driver for USB modems and I SDN adapters
  774. [ 0.792480@3] usbcore: registered new interface driver usb-storage
  775. [ 0.792602@3] usbcore: registered new interface driver usbserial
  776. [ 0.792990@3] mousedev: PS/2 mouse device common for all mice
  777. [ 0.793262@3] usbcore: registered new interface driver xpad
  778. [ 0.793436@3] i2c /dev entries driver
  779. [ 0.793683@3] IR NEC protocol handler initialized
  780. [ 0.793693@3] IR RC5(x/sz) protocol handler initialized
  781. [ 0.793700@3] IR RC6 protocol handler initialized
  782. [ 0.793707@3] IR JVC protocol handler initialized
  783. [ 0.793714@3] IR Sony protocol handler initialized
  784. [ 0.793721@3] IR SANYO protocol handler initialized
  785. [ 0.793728@3] IR Sharp protocol handler initialized
  786. [ 0.793735@3] IR MCE Keyboard/mouse protocol handler initialized
  787. [ 0.793742@3] IR XMP protocol handler initialized
  788. [ 0.793828@3] usbcore: registered new interface driver uvcvideo
  789. [ 0.793836@3] USB Video Class driver (1.1.1)
  790. [ 0.793918@3] usbcore: registered new interface driver cx231xx
  791. [ 0.793930@3] md: linear personality registered for level -1
  792. [ 0.794514@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm -devel@redhat.com
  793. [ 0.794673@3] device-mapper: verity-avb: AVB error handler initialized with v bmeta device:
  794. [ 0.794731@3] Bluetooth: HCI UART driver ver 2.3
  795. [ 0.794742@3] Bluetooth: HCI UART protocol H4 registered
  796. [ 0.795017@3] cpuidle: enable-method property 'psci' found operations
  797. [ 0.795156@3] cpuidle: enable-method property 'psci' found operations
  798. [ 0.795276@3] cpuidle: enable-method property 'psci' found operations
  799. [ 0.795391@3] cpuidle: enable-method property 'psci' found operations
  800. [ 0.796747@3] ledtrig-cpu: registered to indicate activity on CPUs
  801. [ 0.797155@3] hidraw: raw HID events driver (C) Jiri Kosina
  802. [ 0.801290@3] usbcore: registered new interface driver usbhid
  803. [ 0.801307@3] usbhid: USB HID core driver
  804. [ 0.801517@3] ashmem: initialized
  805. [ 0.802745@3] value of voltage_tolerance 0
  806. [ 0.803822@3] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
  807. [ 0.804457@3] meson_cpufreq_probe: Registered platform drive
  808. [ 0.804637@3] ff803000.serial: clock gate not found
  809. [ 0.804689@3] meson_uart ff803000.serial: ==uart0 reg addr = e06b1000
  810. [ 0.804738@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 34, base_baud = 1500000) is a meson_uart
  811. [ 0.804755@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
  812. [ 3.084740@3] console [ttyS0] enabled
  813. [ 3.089138@3] meson_uart ffd24000.serial: ==uart1 reg addr = e06b3000
  814. [ 3.094814@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 49, base_baud = 1500000) is a meson_uart
  815. [ 3.105216@3] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0x ffe09000, iomap phy_base:0xe06b5000
  816. [ 3.114840@3] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0x ffe09080, iomap phy_base:0xe06bd080
  817. [ 3.126279@3] Error: Driver 'meson_reset' is already registered, aborting...
  818. [ 3.131933@3] aml_dma ff63e000.aml_dma: Aml dma
  819. [ 3.136953@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
  820. [ 3.142702@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dm a
  821. [ 3.149339@3] meson-remote: Driver init
  822. [ 3.152975@3] meson-remote: remote_probe
  823. [ 3.156752@3] meson-remote ff808040.rc: protocol = 0x1
  824. [ 3.161855@3] meson-remote ff808040.rc: led_blink = 1
  825. [ 3.166892@3] meson-remote ff808040.rc: led_blink_frq = 100
  826. [ 3.172549@3] meson-remote ff808040.rc: platform_data irq =48
  827. [ 3.178282@3] meson-remote ff808040.rc: custom_number = 3
  828. [ 3.183621@3] meson-remote ff808040.rc: ptable->map_size = 50
  829. [ 3.189335@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote- 1
  830. [ 3.196522@3] meson-remote ff808040.rc: ptable->custom_code = 0xfb04
  831. [ 3.202853@3] meson-remote ff808040.rc: ptable->release_delay = 80
  832. [ 3.209024@3] meson-remote ff808040.rc: ptable->map_size = 53
  833. [ 3.214723@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote- 2
  834. [ 3.221914@3] meson-remote ff808040.rc: ptable->custom_code = 0xfe01
  835. [ 3.228241@3] meson-remote ff808040.rc: ptable->release_delay = 80
  836. [ 3.234411@3] meson-remote ff808040.rc: ptable->map_size = 17
  837. [ 3.240115@3] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote- 3
  838. [ 3.247308@3] meson-remote ff808040.rc: ptable->custom_code = 0xbd02
  839. [ 3.253634@3] meson-remote ff808040.rc: ptable->release_delay = 80
  840. [ 3.259794@3] meson-remote ff808040.rc: default protocol = 0x1 and id = 0
  841. [ 3.266548@3] meson-remote ff808040.rc: reg=0x0, val=0x1f40190
  842. [ 3.272354@3] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8
  843. [ 3.278161@3] meson-remote ff808040.rc: reg=0x8, val=0x960050
  844. [ 3.283880@3] meson-remote ff808040.rc: reg=0xc, val=0x480028
  845. [ 3.289600@3] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013
  846. [ 3.295581@3] meson-remote ff808040.rc: reg=0x18, val=0x8616800
  847. [ 3.301474@3] meson-remote ff808040.rc: reg=0x1c, val=0x9f00
  848. [ 3.307107@3] meson-remote ff808040.rc: reg=0x20, val=0x0
  849. [ 3.312480@3] meson-remote ff808040.rc: reg=0x24, val=0x0
  850. [ 3.317851@3] meson-remote ff808040.rc: reg=0x28, val=0x0
  851. [ 3.323675@3] input: aml_keypad as /devices/platform/ff808040.rc/input/input0
  852. [ 3.330774@3] meson-remote: IR XMP protocol handler initialized
  853. [ 3.338745@3] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-de v
  854. [ 3.343906@3] ge2d: ge2d_init_module
  855. [ 3.347196@3] ge2d: ge2d_dev major:235
  856. [ 3.351054@3] ge2d: clock source clk_ge2d_gate c92935c0
  857. [ 3.355929@3] ge2d: clock clk_ge2d source c9293640
  858. [ 3.360680@3] ge2d: clock source clk_vapb_0 c92936c0
  859. [ 3.365608@3] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 H Z
  860. [ 3.372893@3] ge2d: ge2d clock is 499 MHZ
  861. [ 3.376795@3] ge2d: find address resource
  862. [ 3.380789@3] ge2d: map io source 0xff940000,size=65536 to 0xe0810000
  863. [ 3.387188@3] ge2d: reserved mem init failed
  864. [ 3.391439@3] ge2d: ge2d: pdev=dd9b9e00, irq=56, clk=c92935c0
  865. [ 3.397186@3] ge2d: ge2d start monitor
  866. [ 3.401363@3] [tsync_pcr_init]init success.
  867. [ 3.401425@0] ge2d: ge2d workqueue monitor start
  868. [ 3.409816@3] amvideom vsync irq: 57
  869. [ 3.413823@3] hdmitx: hdcp: hdmitx_hdcp_init
  870. [ 3.417940@3] vout: vout2: create vout2 attribute OK
  871. [ 3.422507@3] vout: vout2: vout2_fops_create OK
  872. [ 3.427038@3] vout: vout2: clktree_init
  873. [ 3.430697@3] vout: vout2: register server: nulldisp_vout2_server
  874. [ 3.436876@3] vout: vout2: init mode null set ok
  875. [ 3.441355@3] vout: vout2: aml_vout2_probe OK
  876. [ 3.445806@3] DI: di_module_init ok.
  877. [ 3.449246@3] DI: di_module_init: major 509
  878. [ 3.453800@3] deinterlace deinterlace: assigned reserved memory node linux,di _cma
  879. [ 3.460863@3] di:flag_cma=1
  880. [ 3.463633@3] DI: CMA size 0x2800000.
  881. [ 3.467282@3] pre_irq:73
  882. [ 3.469773@3] post_irq:74
  883. [ 3.472386@3] DI: di_probe allocate rdma channel 0.
  884. [ 3.477236@3] di_get_vpu_clkb: get clk vpu error.
  885. [ 3.481919@3] DI: vpu clkb <334000000, 667000000>
  886. [ 3.486630@3] get clkb rate:333333328
  887. [ 3.490245@3] DI:enable vpu clkb.
  888. [ 3.493523@3] 0x000000de:Y=de,U=0,V=0
  889. [ 3.497166@3] 0x000000df:Y=df,U=0,V=0
  890. [ 3.500808@3] 0x000000e0:Y=e0,U=0,V=0
  891. [ 3.504447@3] 0x000000e1:Y=e1,U=0,V=0
  892. [ 3.508087@3] 0x000000e2:Y=e2,U=0,V=0
  893. [ 3.511726@3] 0x000000e3:Y=e3,U=0,V=0
  894. [ 3.515365@3] 0x000000f0:Y=f0,U=0,V=0
  895. [ 3.519006@3] 0x000000f1:Y=f1,U=0,V=0
  896. [ 3.522645@3] 0x000000f2:Y=f2,U=0,V=0
  897. [ 3.526286@3] 0x000000f3:Y=f3,U=0,V=0
  898. [ 3.529917@3] 0x000000f4:Y=f4,U=0,V=0
  899. [ 3.533566@3] 0x000000f5:Y=f5,U=0,V=0
  900. [ 3.537206@3] 0x000000f6:Y=f6,U=0,V=0
  901. [ 3.540848@3] 0x000000f7:Y=f7,U=0,V=0
  902. [ 3.544485@3] 0x000000f8:Y=f8,U=0,V=0
  903. [ 3.548126@3] 0x000000f9:Y=f9,U=0,V=0
  904. [ 3.551768@3] 0x000000fa:Y=fa,U=0,V=0
  905. [ 3.555406@3] 0x000000fb:Y=fb,U=0,V=0
  906. [ 3.559048@3] 0x000000fc:Y=fc,U=0,V=0
  907. [ 3.562685@3] 0x000000fd:Y=fd,U=0,V=0
  908. [ 3.566326@3] 0x000000fe:Y=fe,U=0,V=0
  909. [ 3.569954@3] 0x000000ff:Y=ff,U=0,V=0
  910. [ 3.573607@3] 0x0000003a:Y=3a,U=0,V=0
  911. [ 3.577243@3] 0x0000003b:Y=3b,U=0,V=0
  912. [ 3.580886@3] 0x0000003c:Y=3c,U=0,V=0
  913. [ 3.584526@3] DI: support multi decoding 58~59~60.
  914. [ 3.589458@3] DI: di_probe:Di use HRTIMER
  915. [ 3.593421@3] di_probe:ok
  916. [ 3.595990@3] vdin_drv_init: major 508
  917. [ 3.599948@3] rdma_register, rdma_table_addr e080d000 rdma_table_addr_phy 5b4 4a000 reg_buf c929ec00
  918. [ 3.608635@3] rdma_register success, handle 3 table_size 512
  919. [ 3.614270@3] vdin_drv_probe:vdin.0 rdma hanld 3.
  920. [ 3.619099@3]
  921. [ 3.619099@3] vdin memory resource undefined!!
  922. [ 3.625100@3] vdin0 cma_mem_size = 8 MB
  923. [ 3.628908@3] vdin0 irq: 54 rdma irq: 2
  924. [ 3.632722@3] set_canvas_manual = 0
  925. [ 3.636185@3] no urgent_en found
  926. [ 3.639412@3] get fclk_div5 err
  927. [ 3.642522@3] vdin_drv_probe: vdin cannot get msr clk !!!
  928. [ 3.647908@3] vdin_drv_probe: driver initialized ok
  929. [ 3.652825@3] rdma_register, rdma_table_addr e0821000 rdma_table_addr_phy 5b4 4b000 reg_buf c929f000
  930. [ 3.661761@3] rdma_register success, handle 4 table_size 512
  931. [ 3.667387@3] vdin_drv_probe:vdin.1 rdma hanld 4.
  932. [ 3.672298@3] vdin vdin1: assigned reserved memory node linux,vdin1_cma
  933. [ 3.678652@3]
  934. [ 3.678652@3] vdin memory resource done.
  935. [ 3.684298@3] vdin1 cma_mem_size = 64 MB
  936. [ 3.688182@3] vdin1 irq: 55 rdma irq: 4
  937. [ 3.692007@3] set_canvas_manual = 0
  938. [ 3.695459@3] no urgent_en found
  939. [ 3.698696@3] get fclk_div5 err
  940. [ 3.701787@3] vdin_drv_probe: vdin cannot get msr clk !!!
  941. [ 3.707169@3] vdin_debugfs_init only support debug vdin0 1
  942. [ 3.712636@3] vdin_drv_probe: driver initialized ok
  943. [ 3.717606@3] vdin_drv_init: vdin driver init done
  944. [ 3.722254@3] [viuin..]viuin_init_module viuin module init
  945. [ 3.727959@3] [viuin..]viuin_probe probe ok.
  946. [ 3.732432@3] [RX]-hdmirx: hdmirx_init.
  947. [ 3.735767@3] ESM HLD: Initializing...
  948. [ 3.739635@3] tvin_afe: tvafe_drv_init: major 506
  949. [ 3.744478@3] tvin_afe: tvafe_drv_init.
  950. [ 3.748145@3] tvafe_vbi: vbi: vbi_init.
  951. [ 3.752004@3] amvdec_csi module: init.
  952. [ 3.755525@3] amvdec_csi_init_module:major 504
  953. [ 3.760111@3] amvdec_csi module: init. ok
  954. [ 3.763930@3] amlvid:info: amlvideo_init called[ 3.768268@3] amlvid:info: amlvideo_create_instance called
  955. [ 3.773730@3] amlvid:info: v4l2_dev.name=:amlvideo-000
  956. [ 3.778993@3] amlvideo-000: V4L2 device registered as video10
  957. [ 3.784564@3] amlvid:info: amlvideo_create_instance called
  958. [ 3.790029@3] amlvid:info: v4l2_dev.name=:amlvideo-001
  959. [ 3.795258@3] amlvideo-001: V4L2 device registered as video23
  960. [ 3.801041@3] PPMGRDRV: warn: ppmgr module init func called
  961. [ 3.806528@3] PPMGRDRV: err: ppmgr_driver_probe called
  962. [ 3.811588@3] PPMGRDRV: info: ppmgr_dev major:503
  963. [ 3.816394@3] ppmgr: probe of ppmgr failed with error -22
  964. [ 3.822102@3] ionvideo-000: V4L2 device registered as video13
  965. [ 3.827401@3] ionvideo-001: V4L2 device registered as video14
  966. [ 3.833122@3] ionvideo-002: V4L2 device registered as video15
  967. [ 3.838849@3] ionvideo-003: V4L2 device registered as video16
  968. [ 3.844582@3] ionvideo-004: V4L2 device registered as video17
  969. [ 3.850339@3] ionvideo-005: V4L2 device registered as video18
  970. [ 3.855990@3] ionvideo-006: V4L2 device registered as video19
  971. [ 3.861739@3] ionvideo-007: V4L2 device registered as video20
  972. [ 3.867434@3] ionvideo-008: V4L2 device registered as video21
  973. [ 3.873056@3] ionvid: info: Video Technology Magazine Ion Video
  974. [ 3.878933@3] ionvid: info: Capture Board ver 1.0 successfully loaded
  975. [ 3.885623@3] picdec: picdec_driver_probe called.
  976. [ 3.890293@3] picdec: probe of picdec failed with error -22
  977. [ 3.895777@3] videosync_create_instance dev_s c93f4400,dev_s->dev c93d7240
  978. [ 3.902433@3] videosync_create_instance reg videosync.0
  979. [ 3.907699@3] aml_vecm_init:module init
  980. [ 3.907703@0] videosync_thread started
  981. [ 3.915393@3]
  982. [ 3.915393@3] VECM probe start
  983. [ 3.920194@3] vlock_status_init vlock_en:0
  984. [ 3.924024@3] Can't find wb_sel.
  985. [ 3.927294@3] hdr:Can't find cfg_en_osd_100.
  986. [ 3.931638@3] amlogic, vecm[ 3.934226@3] vlock dt support: 1
  987. [ 3.937507@3] vlock dt new_fsm: 0
  988. [ 3.940819@3] vlock dt hwver: 0
  989. [ 3.943932@3] vlock dt phlock_en: 0
  990. [ 3.947402@3] Can't find vlock_en.
  991. [ 3.950873@3] Can't find vlock_mode.
  992. [ 3.954505@3] Can't find vlock_pll_m_limit.
  993. [ 3.958751@3] Can't find vlock_line_limit.
  994. [ 3.962945@3] param_config vlock_en:0
  995. [ 3.966556@3] aml_vecm_probe: ok
  996. [ 3.969815@3] amdolby_vision_init:module init
  997. [ 3.974405@3]
  998. [ 3.974405@3] amdolby_vision probe start & ver: 20181220
  999. [ 3.981139@3]
  1000. [ 3.981139@3] cpu_id=2 tvmode=1
  1001. [ 3.986138@3] dolby_vision_init_receiver(dvel)
  1002. [ 3.990402@3] dolby_vision_init_receiver: dvel
  1003. [ 3.994943@3] amdolby_vision_probe: ok
  1004. [ 3.998612@3] prime_sl module init
  1005. [ 4.002380@3] vm_init .
  1006. [ 4.005154@3] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
  1007. [ 4.013230@3] meson-mmc: >>>>>>>>hostbase e083c000, dmode
  1008. [ 4.018059@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  1009. [ 4.023516@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  1010. [ 4.286325@3] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 ! = actual rate 199999997: ret=0
  1011. [ 4.290442@3] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  1012. [ 4.296405@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  1013. [ 4.303435@3] meson-mmc: Data 1 aligned delay is 0
  1014. [ 4.308193@3] meson-mmc: emmc: clk 199999997 tuning start
  1015. [ 4.316455@3] meson-mmc: emmc: rx_tuning_result[0] = 40
  1016. [ 4.320222@3] meson-mmc: emmc: rx_tuning_result[1] = 40
  1017. [ 4.324053@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffa c
  1018. [ 4.332645@3] meson-mmc: emmc: rx_tuning_result[3] = 40
  1019. [ 4.337824@3] meson-mmc: emmc: rx_tuning_result[4] = 40
  1020. [ 4.341570@3] meson-mmc: emmc: best_win_start =3, best_win_size =4
  1021. [ 4.347715@3] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs-> gadjust=0x2000
  1022. [ 4.356219@3] emmc: new HS200 MMC card at address 0001
  1023. [ 4.361157@3] emmc: clock 199999997, 8-bit-bus-width
  1024. [ 4.366746@3] mmcblk0: emmc:0001 BJNB4R 29.1 GiB
  1025. [ 4.371301@3] mmcblk0boot0: emmc:0001 BJNB4R partition 1 4.00 MiB
  1026. [ 4.381419@3] mmcblk0boot1: emmc:0001 BJNB4R partition 2 4.00 MiB
  1027. [ 4.383167@3] mmcblk0rpmb: emmc:0001 BJNB4R partition 3 4.00 MiB
  1028. [ 4.389844@3] meson-mmc: Enter aml_emmc_partition_ops
  1029. [ 4.394513@3] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
  1030. [ 4.400678@3] meson-mmc: add_emmc_partition
  1031. [ 4.405001@3] meson-mmc: [mmcblk0p01] bootloader offset 0x00000000 0000, size 0x000000400000
  1032. [ 4.414327@3] meson-mmc: [mmcblk0p02] reserved offset 0x00000240 0000, size 0x000004000000
  1033. [ 4.423694@3] meson-mmc: [mmcblk0p03] cache offset 0x000006c0 0000, size 0x000046000000
  1034. [ 4.433051@3] meson-mmc: [mmcblk0p04] env offset 0x00004d40 0000, size 0x000000800000
  1035. [ 4.442415@3] meson-mmc: [mmcblk0p05] logo offset 0x00004e40 0000, size 0x000000800000
  1036. [ 4.451774@3] meson-mmc: [mmcblk0p06] recovery offset 0x00004f40 0000, size 0x000001800000
  1037. [ 4.461131@3] meson-mmc: [mmcblk0p07] misc offset 0x00005140 0000, size 0x000000800000
  1038. [ 4.470493@3] meson-mmc: [mmcblk0p08] dtbo offset 0x00005240 0000, size 0x000000800000
  1039. [ 4.479847@3] meson-mmc: [mmcblk0p09] cri_data offset 0x00005340 0000, size 0x000000800000
  1040. [ 4.489213@3] meson-mmc: [mmcblk0p10] param offset 0x00005440 0000, size 0x000001000000
  1041. [ 4.498566@3] meson-mmc: [mmcblk0p11] boot offset 0x000055c0 0000, size 0x000001000000
  1042. [ 4.507925@3] meson-mmc: [mmcblk0p12] rsv offset 0x00005740 0000, size 0x000001000000
  1043. [ 4.517308@3] meson-mmc: [mmcblk0p13] metadata offset 0x000058c0 0000, size 0x000001000000
  1044. [ 4.526647@3] meson-mmc: [mmcblk0p14] vbmeta offset 0x00005a40 0000, size 0x000000200000
  1045. [ 4.536014@3] meson-mmc: [mmcblk0p15] tee offset 0x00005ae0 0000, size 0x000002000000
  1046. [ 4.545385@3] meson-mmc: [mmcblk0p16] vendor offset 0x00005d60 0000, size 0x000020000000
  1047. [ 4.554725@3] meson-mmc: [mmcblk0p17] odm offset 0x00007de0 0000, size 0x000008000000
  1048. [ 4.564088@3] meson-mmc: [mmcblk0p18] system offset 0x00008660 0000, size 0x000074000000
  1049. [ 4.573442@3] meson-mmc: [mmcblk0p19] product offset 0x0000fae0 0000, size 0x000008000000
  1050. [ 4.582806@3] meson-mmc: [mmcblk0p20] data offset 0x00010360 0000, size 0x000644600000
  1051. [ 4.592052@3] card key: card_blk_probe.
  1052. [ 4.595849@3] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
  1053. [ 4.602696@3] emmc key: emmc_key_init:205 ok.
  1054. [ 4.607026@3] meson-mmc: amlmmc_dtb_init: register dtb chardev[ 4.614574@3 ] meson-mmc: calc b9f39d09, store b9f39d09
  1055. [ 4.619647@3] meson-mmc: calc b9f39d09, store b9f39d09
  1056. [ 4.622887@3] meson-mmc: total valid 2
  1057. [ 4.626825@3] meson-mmc: amlmmc_dtb_init: register dtb chardev OK[ 4.63255 0@3] meson-mmc: Exit aml_emmc_partition_ops OK.
  1058. [ 11.338012@0] vout: aml_tvout_mode_work: monitor_timeout
RAW Paste Data