API tools faq
paste
Advertisement
armoon

yocto bootlog 6.1.x

armoon
Mar 19th, 2023
91
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.42 KB | None | 0 0
raw download clone embed print report
  1. U-Boot TPL 2023.01-rc3 (Dec 14 2022 - 17:36:41)
  2. Trying to boot from BOOTROM
  3. Returning to boot ROM...
  4.  
  5. U-Boot SPL 2023.01-rc3 (Dec 14 2022 - 17:36:41 +0000)
  6. Trying to boot from MMC2
  7. I/TC:
  8. I/TC: cpu feature:0x0
  9. I/TC: cpu_st=0xe0
  10. I/TC: OP-TEE version: 3.6.0-300-g380b79bf #35 Sat Oct 17 03:53:58 UTC 2020 arm
  11. I/TC: Next entry point address: 0x00600000
  12. I/TC: Initialized
  13.  
  14.  
  15. U-Boot 2023.01-rc3 (Dec 14 2022 - 17:36:41 +0000)
  16.  
  17. Model: Edgeble Neu2 IO Board
  18. DRAM: 2 GiB
  19. PMIC: RK8090 (on=0x10, off=0x00)
  20. Core: 98 devices, 19 uclasses, devicetree: separate
  21. MMC: mmc@ffc50000: 0, mmc@ffc60000: 1
  22. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  23.  
  24. In: serial@ff570000
  25. Out: serial@ff570000
  26. Err: serial@ff570000
  27. Model: Edgeble Neu2 IO Board
  28. Net: No ethernet found.
  29. Hit any key to stop autoboot: 0
  30. switch to partitions #0, OK
  31. mmc0(part 0) is current device
  32. switch to partitions #0, OK
  33. mmc1 is current device
  34. Scanning mmc 1:6...
  35. Found /extlinux/extlinux.conf
  36. Retrieving file: /extlinux/extlinux.conf
  37. 1: Yocto
  38. Retrieving file: /zImage
  39. append: root=PARTUUID=437b1b59-b741-458c-acf0-782f06ef38d3 rootwait console=tty1 console=ttyS2,115200n8 rw rootfstype=ext4 init=/sbin/init
  40. Retrieving file: /rv1126-edgeble-neu2-io.dtb
  41. Kernel image @ 0x2008000 [ 0x000000 - 0xa63200 ]
  42. ## Flattened Device Tree blob at 08300000
  43. Booting using the fdt blob at 0x8300000
  44. Working FDT set to 8300000
  45. Loading Device Tree to 0fff9000, end 0ffffe7f ... OK
  46. Working FDT set to fff9000
  47.  
  48. Starting kernel ...
  49.  
  50. [ 0.000000] Booting Linux on physical CPU 0xf00
  51. [ 0.000000] Linux version 6.1.0-rc3-next-20221102-yocto-standard (oe-user@oe-host) (arm-oe-linux-gnueabi-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP Tue Nov 29 04:52:56 UTC 2022
  52. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  53. [ 0.000000] CPU: div instructions available: patching division code
  54. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  55. [ 0.000000] OF: fdt: Machine model: Edgeble Neu2 IO Board
  56. [ 0.000000] Memory policy: Data cache writealloc
  57. [ 0.000000] efi: UEFI not found.
  58. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000
  59. [ 0.000000] Zone ranges:
  60. [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
  61. [ 0.000000] Normal empty
  62. [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
  63. [ 0.000000] Movable zone start for each node
  64. [ 0.000000] Early memory node ranges
  65. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
  66. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
  67. [ 0.000000] psci: probing for conduit method from DT.
  68. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  69. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  70. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  71. [ 0.000000] psci: SMC Calling Convention v1.0
  72. [ 0.000000] percpu: Embedded 16 pages/cpu s34772 r8192 d22572 u65536
  73. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752
  74. [ 0.000000] Kernel command line: root=PARTUUID=437b1b59-b741-458c-acf0-782f06ef38d3 rootwait console=tty1 console=ttyS2,115200n8 rw rootfstype=ext4 init=/sbin/init
  75. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  76. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  77. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  78. [ 0.000000] Memory: 1986512K/2097152K available (15360K kernel code, 2577K rwdata, 6172K rodata, 2048K init, 428K bss, 45104K reserved, 65536K cma-reserved, 1245184K highmem)
  79. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  80. [ 0.000000] trace event string verifier disabled
  81. [ 0.000000] rcu: Hierarchical RCU implementation.
  82. [ 0.000000] rcu: RCU event tracing is enabled.
  83. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
  84. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  85. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  86. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  87. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  88. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
  89. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  90. [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  91. [ 0.000018] Switching to timer-based delay loop, resolution 41ns
  92. [ 0.001466] Failed to get pclk for 'rk_timer'
  93. [ 0.002631] Console: colour dummy device 80x30
  94. [ 0.003168] printk: console [tty1] enabled
  95. [ 0.003241] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  96. [ 0.003283] pid_max: default: 32768 minimum: 301
  97. [ 0.003523] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  98. [ 0.003568] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  99. [ 0.004293] CPU: Testing write buffer coherency: ok
  100. [ 0.004750] /cpus/cpu@f00 missing clock-frequency property
  101. [ 0.004809] /cpus/cpu@f01 missing clock-frequency property
  102. [ 0.004850] /cpus/cpu@f02 missing clock-frequency property
  103. [ 0.004890] /cpus/cpu@f03 missing clock-frequency property
  104. [ 0.004920] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  105. [ 0.005853] Setting up static identity map for 0x300000 - 0x3000ac
  106. [ 0.006647] rcu: Hierarchical SRCU implementation.
  107. [ 0.006675] rcu: Max phase no-delay instances is 1000.
  108. [ 0.008463] EFI services will not be available.
  109. [ 0.008873] smp: Bringing up secondary CPUs ...
  110. [ 0.009866] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  111. [ 0.010974] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  112. [ 0.011947] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  113. [ 0.012060] smp: Brought up 1 node, 4 CPUs
  114. [ 0.012136] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  115. [ 0.012159] CPU: All CPU(s) started in SVC mode.
  116. [ 0.012978] devtmpfs: initialized
  117. [ 0.017996] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  118. [ 0.018272] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  119. [ 0.018322] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  120. [ 0.020963] pinctrl core: initialized pinctrl subsystem
  121. [ 0.023354] DMI not present or invalid.
  122. [ 0.024405] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  123. [ 0.026538] DMA: preallocated 256 KiB pool for atomic coherent allocations
  124. [ 0.028947] thermal_sys: Registered thermal governor 'step_wise'
  125. [ 0.029043] cpuidle: using governor menu
  126. [ 0.029380] No ATAGs?
  127. [ 0.029548] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  128. [ 0.029586] hw-breakpoint: maximum watchpoint size is 8 bytes.
  129. [ 0.031946] Serial: AMBA PL011 UART driver
  130. [ 0.037577] rockchip-pm-domain ff3e0000.power-management:power-controller: power-domain: failed to get clk at index 0: -517
  131. [ 0.037631] rockchip-pm-domain ff3e0000.power-management:power-controller: failed to handle node power-domain: -517
  132. [ 0.066923] iommu: Default domain type: Translated
  133. [ 0.066971] iommu: DMA domain TLB invalidation policy: strict mode
  134. [ 0.067755] SCSI subsystem initialized
  135. [ 0.068331] usbcore: registered new interface driver usbfs
  136. [ 0.068403] usbcore: registered new interface driver hub
  137. [ 0.068467] usbcore: registered new device driver usb
  138. [ 0.069724] pps_core: LinuxPPS API ver. 1 registered
  139. [ 0.069751] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  140. [ 0.069794] PTP clock support registered
  141. [ 0.069981] EDAC MC: Ver: 3.0.0
  142. [ 0.073156] vgaarb: loaded
  143. [ 1.354339] clocksource: Switched to clocksource arch_sys_counter
  144. [ 1.366998] NET: Registered PF_INET protocol family
  145. [ 1.367358] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  146. [ 1.370225] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  147. [ 1.370307] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  148. [ 1.370348] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  149. [ 1.370457] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
  150. [ 1.370737] TCP: Hash tables configured (established 8192 bind 8192)
  151. [ 1.370894] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  152. [ 1.370978] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  153. [ 1.371238] NET: Registered PF_UNIX/PF_LOCAL protocol family
  154. [ 1.371959] RPC: Registered named UNIX socket transport module.
  155. [ 1.372006] RPC: Registered udp transport module.
  156. [ 1.372024] RPC: Registered tcp transport module.
  157. [ 1.372041] RPC: Registered tcp NFSv4.1 backchannel transport module.
  158. [ 1.373352] PCI: CLS 0 bytes, default 64
  159. [ 1.409403] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  160. [ 1.411083] Initialise system trusted keyrings
  161. [ 1.411464] workingset: timestamp_bits=30 max_order=19 bucket_order=0
  162. [ 1.411926] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  163. [ 1.412350] NFS: Registering the id_resolver key type
  164. [ 1.412424] Key type id_resolver registered
  165. [ 1.412447] Key type id_legacy registered
  166. [ 1.412489] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  167. [ 1.412513] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  168. [ 1.412566] ntfs: driver 2.1.32 [Flags: R/O].
  169. [ 1.412968] Key type asymmetric registered
  170. [ 1.412996] Asymmetric key parser 'x509' registered
  171. [ 1.413126] bounce: pool size: 64 pages
  172. [ 1.413205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  173. [ 1.413235] io scheduler mq-deadline registered
  174. [ 1.413254] io scheduler kyber registered
  175. [ 1.454966] dma-pl330 ff4e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  176. [ 1.455028] dma-pl330 ff4e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  177. [ 1.534189] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
  178. [ 1.538035] ff560000.serial: ttyS0 at MMIO 0xff560000 (irq = 35, base_baud = 1500000) is a 16550A
  179. [ 1.538290] serial serial0: tty port ttyS0 registered
  180. [ 1.539387] ff570000.serial: ttyS2 at MMIO 0xff570000 (irq = 36, base_baud = 1500000) is a 16550A
  181. [ 2.427510] printk: console [ttyS2] enabled
  182. [ 2.434252] SuperH (H)SCI(F) driver initialized
  183. [ 2.440195] msm_serial: driver initialized
  184. [ 2.444824] STMicroelectronics ASC driver initialized
  185. [ 2.451306] STM32 USART driver initialized
  186. [ 2.472735] brd: module loaded
  187. [ 2.483391] loop: module loaded
  188. [ 2.498248] CAN device driver interface
  189. [ 2.503483] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  190. [ 2.510766] e1000e: Intel(R) PRO/1000 Network Driver
  191. [ 2.516391] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  192. [ 2.523065] igb: Intel(R) Gigabit Ethernet Network Driver
  193. [ 2.529140] igb: Copyright (c) 2007-2014 Intel Corporation.
  194. [ 2.539018] pegasus: Pegasus/Pegasus II USB Ethernet driver
  195. [ 2.545336] usbcore: registered new interface driver pegasus
  196. [ 2.551709] usbcore: registered new interface driver asix
  197. [ 2.557817] usbcore: registered new interface driver ax88179_178a
  198. [ 2.564708] usbcore: registered new interface driver cdc_ether
  199. [ 2.571276] usbcore: registered new interface driver smsc75xx
  200. [ 2.577768] usbcore: registered new interface driver smsc95xx
  201. [ 2.584236] usbcore: registered new interface driver net1080
  202. [ 2.590631] usbcore: registered new interface driver cdc_subset
  203. [ 2.597326] usbcore: registered new interface driver zaurus
  204. [ 2.603652] usbcore: registered new interface driver cdc_ncm
  205. [ 2.613581] usbcore: registered new interface driver usb-storage
  206. [ 2.624904] i2c_dev: i2c /dev entries driver
  207. [ 2.645792] sdhci: Secure Digital Host Controller Interface driver
  208. [ 2.652747] sdhci: Copyright(c) Pierre Ossman
  209. [ 2.659301] Synopsys Designware Multimedia Card Interface Driver
  210. [ 2.667573] sdhci-pltfm: SDHCI platform and OF driver helper
  211. [ 2.676658] ledtrig-cpu: registered to indicate activity on CPUs
  212. [ 2.685060] usbcore: registered new interface driver usbhid
  213. [ 2.691325] usbhid: USB HID core driver
  214. [ 2.701347] NET: Registered PF_INET6 protocol family
  215. [ 2.708367] Segment Routing with IPv6
  216. [ 2.712564] In-situ OAM (IOAM) with IPv6
  217. [ 2.717111] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  218. [ 2.724536] NET: Registered PF_PACKET protocol family
  219. [ 2.730211] can: controller area network core
  220. [ 2.735173] NET: Registered PF_CAN protocol family
  221. [ 2.740545] can: raw protocol
  222. [ 2.743874] can: broadcast manager protocol
  223. [ 2.748595] can: netlink gateway - max_hops=1
  224. [ 2.753891] Key type dns_resolver registered
  225. [ 2.758867] ThumbEE CPU extension supported.
  226. [ 2.763665] Registering SWP/SWPB emulation handler
  227. [ 2.781043] Loading compiled-in X.509 certificates
  228. [ 2.822357] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  229. [ 2.832766] rockchip-gpio ff460000.gpio: probed /pinctrl/gpio@ff460000
  230. [ 2.840570] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
  231. [ 2.850883] rockchip-gpio ff620000.gpio: probed /pinctrl/gpio@ff620000
  232. [ 2.858648] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
  233. [ 2.868895] rockchip-gpio ff630000.gpio: probed /pinctrl/gpio@ff630000
  234. [ 2.876604] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
  235. [ 2.886820] rockchip-gpio ff640000.gpio: probed /pinctrl/gpio@ff640000
  236. [ 2.894512] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
  237. [ 2.904706] rockchip-gpio ff650000.gpio: probed /pinctrl/gpio@ff650000
  238. [ 2.914655] rk808 0-0020: chip id: 0x8090
  239. [ 2.933833] rk808-regulator rk808-regulator: there is no dvs0 gpio
  240. [ 2.940885] rk808-regulator rk808-regulator: there is no dvs1 gpio
  241. [ 2.962189] vcc_dvdd: Bringing 1100000uV into 1200000-1200000uV
  242. [ 2.980088] rk808-rtc rk808-rtc: registered as rtc0
  243. [ 2.986456] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:22:55 UTC (1501924975)
  244. [ 3.010902] dwmmc_rockchip ffc60000.mmc: IDMAC supports 32-bit address mode.
  245. [ 3.014707] dwmmc_rockchip ffc70000.mmc: IDMAC supports 32-bit address mode.
  246. [ 3.028829] dwmmc_rockchip ffc60000.mmc: Using internal DMA controller.
  247. [ 3.029968] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  248. [ 3.032500] dwmmc_rockchip ffc50000.mmc: IDMAC supports 32-bit address mode.
  249. [ 3.036288] dwmmc_rockchip ffc60000.mmc: Version ID is 270a
  250. [ 3.036379] dwmmc_rockchip ffc60000.mmc: DW MMC controller at irq 68,32 bit host data width,256 deep fifo
  251. [ 3.048892] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  252. [ 3.053257] dwmmc_rockchip ffc70000.mmc: Using internal DMA controller.
  253. [ 3.059670] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  254. [ 3.066769] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  255. [ 3.069827] dwmmc_rockchip ffc70000.mmc: Version ID is 270a
  256. [ 3.077146] cfg80211: failed to load regulatory.db
  257. [ 3.084596] dwmmc_rockchip ffc70000.mmc: DW MMC controller at irq 70,32 bit host data width,256 deep fifo
  258. [ 3.127261] dwmmc_rockchip ffc50000.mmc: Using internal DMA controller.
  259. [ 3.134729] dwmmc_rockchip ffc50000.mmc: Version ID is 270a
  260. [ 3.140995] dw-apb-uart ff570000.serial: forbid DMA for kernel console
  261. [ 3.141029] dwmmc_rockchip ffc50000.mmc: DW MMC controller at irq 71,32 bit host data width,256 deep fifo
  262. [ 3.141212] dwmmc_rockchip ffc70000.mmc: allocated mmc-pwrseq
  263. [ 3.141224] mmc_host mmc2: card is non-removable.
  264. [ 3.171883] mmc_host mmc0: card is non-removable.
  265. [ 3.178912] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  266. [ 3.190040] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  267. [ 3.193534] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 200000000Hz, actual 198000000HZ div = 0)
  268. [ 3.213199] Waiting for root device PARTUUID=437b1b59-b741-458c-acf0-782f06ef38d3...
  269. [ 3.260415] mmc2: queuing unknown CIS tuple 0x01 [d9 01 ff] (3 bytes)
  270. [ 3.275070] mmc2: queuing unknown CIS tuple 0x1a [01 01 00 02 07] (5 bytes)
  271. [ 3.286134] mmc2: queuing unknown CIS tuple 0x1b [c1 41 30 30 ff ff 32 00] (8 bytes)
  272. [ 3.295487] mmc2: queuing unknown CIS tuple 0x14 [] (0 bytes)
  273. [ 3.303582] mmc_host mmc2: Bus speed (slot 0) = 99000000Hz (slot req 100000000Hz, actual 99000000HZ div = 0)
  274. [ 3.319451] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  275. [ 3.331712] mmc0: new MMC card at address 0001
  276. [ 3.337808] mmcblk0: mmc0:0001 SOD16G 14.6 GiB
  277. [ 3.349517] mmcblk0: p1
  278. [ 3.353402] mmcblk0boot0: mmc0:0001 SOD16G 4.00 MiB
  279. [ 3.361272] mmcblk0boot1: mmc0:0001 SOD16G 4.00 MiB
  280. [ 3.368819] mmcblk0rpmb: mmc0:0001 SOD16G 4.00 MiB, chardev (236:0)
  281. [ 3.493480] dwmmc_rockchip ffc70000.mmc: Successfully tuned phase to 200
  282. [ 3.502841] mmc2: new ultra high speed SDR104 SDIO card at address 0001
  283. [ 3.557178] dwmmc_rockchip ffc60000.mmc: Successfully tuned phase to 91
  284. [ 3.564645] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
  285. [ 3.573037] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
  286. [ 3.588109] GPT:Primary header thinks Alt. header is not at the end of the disk.
  287. [ 3.596481] GPT:819549 != 31116287
  288. [ 3.600296] GPT:Alternate GPT header not at the end of the disk.
  289. [ 3.607044] GPT:819549 != 31116287
  290. [ 3.610856] GPT: Use GNU Parted to correct GPT errors.
  291. [ 3.616682] mmcblk1: p1 p2 p3 p4 p5 p6 p7
  292. [ 3.655009] EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. Quota mode: disabled.
  293. [ 3.665102] VFS: Mounted root (ext4 filesystem) on device 179:55.
  294. [ 3.676415] devtmpfs: mounted
  295. [ 3.683147] Freeing unused kernel image (initmem) memory: 2048K
  296. [ 3.690268] Run /sbin/init as init process
  297. [ 3.817935] systemd[1]: System time before build time, advancing clock.
  298. [ 3.846070] systemd[1]: systemd 250.5+ running in system mode (-PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
  299. [ 3.882083] systemd[1]: Detected architecture arm.
  300.  
  301. Welcome to OpenEmbedded nodistro.0!
  302.  
  303. [ 3.928336] systemd[1]: Hostname set to <neu2-io>.
  304. [ 3.936160] systemd[1]: Initializing machine ID from random generator.
  305. [ 4.808973] systemd[1]: Queued start job for default target Multi-User System.
  306. [ 4.821129] systemd[1]: Created slice Slice /system/getty.
  307. [ OK ] Created slice Slice /system/getty.
  308. [ 4.866040] systemd[1]: Created slice Slice /system/modprobe.
  309. [ OK ] Created slice Slice /system/modprobe.
  310. [ 4.905911] systemd[1]: Created slice Slice /system/serial-getty.
  311. [ OK ] Created slice Slice /system/serial-getty.
  312. [ 4.945224] systemd[1]: Created slice User and Session Slice.
  313. [ OK ] Created slice User and Session Slice.
  314. [ 4.984853] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  315. [ OK ] Started Dispatch Password …ts to Console Directory Watch.
  316. [ 5.024819] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  317. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  318. [ 5.065125] systemd[1]: Reached target Path Units.
  319. [ OK ] Reached target Path Units.
  320. [ 5.094634] systemd[1]: Reached target Remote File Systems.
  321. [ OK ] Reached target Remote File Systems.
  322. [ 5.134593] systemd[1]: Reached target Slice Units.
  323. [ OK ] Reached target Slice Units.
  324. [ 5.164612] systemd[1]: Reached target Swaps.
  325. [ OK ] Reached target Swaps.
  326. [ 5.201006] systemd[1]: Listening on RPCbind Server Activation Socket.
  327. [ OK ] Listening on RPCbind Server Activation Socket.
  328. [ 5.244687] systemd[1]: Reached target RPC Port Mapper.
  329. [ OK ] Reached target RPC Port Mapper.
  330. [ 5.289441] systemd[1]: Listening on Syslog Socket.
  331. [ OK ] Listening on Syslog Socket.
  332. [ 5.325030] systemd[1]: Listening on initctl Compatibility Named Pipe.
  333. [ OK ] Listening on initctl Compatibility Named Pipe.
  334. [ 5.392490] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
  335. [ 5.405687] systemd[1]: Listening on Journal Socket (/dev/log).
  336. [ OK ] Listening on Journal Socket (/dev/log).
  337. [ 5.445437] systemd[1]: Listening on Journal Socket.
  338. [ OK ] Listening on Journal Socket.
  339. [ 5.475760] systemd[1]: Listening on Network Service Netlink Socket.
  340. [ OK ] Listening on Network Service Netlink Socket.
  341. [ 5.519049] systemd[1]: Listening on udev Control Socket.
  342. [ OK ] Listening on udev Control Socket.
  343. [ 5.555232] systemd[1]: Listening on udev Kernel Socket.
  344. [ OK ] Listening on udev Kernel Socket.
  345. [ 5.595329] systemd[1]: Listening on User Database Manager Socket.
  346. [ OK ] Listening on User Database Manager Socket.
  347. [ 5.635168] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
  348. [ 5.650149] systemd[1]: POSIX Message Queue File System was skipped because of a failed condition check (ConditionPathExists=/proc/sys/fs/mqueue).
  349. [ 5.704923] systemd[1]: Mounting Kernel Debug File System...
  350. Mounting Kernel Debug File System...
  351. [ 5.738580] systemd[1]: Mounting Kernel Trace File System...
  352. Mounting Kernel Trace File System...
  353. [ 5.782177] systemd[1]: Mounting Temporary Directory /tmp...
  354. Mounting Temporary Directory /tmp...
  355. [ 5.820287] systemd[1]: Starting Create List of Static Device Nodes...
  356. Starting Create List of Static Device Nodes...
  357. [ 5.869662] systemd[1]: Starting Load Kernel Module configfs...
  358. Starting Load Kernel Module configfs...
  359. [ 5.909636] systemd[1]: Starting Load Kernel Module drm...
  360. Starting Load Kernel Module drm...
  361. [ 5.949608] systemd[1]: Starting Load Kernel Module fuse...
  362. Starting Load Kernel Module fuse...
  363. [ 5.993367] systemd[1]: Starting RPC Bind...
  364. Starting RPC Bind...
  365. [ 6.024811] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
  366. [ 6.040237] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
  367. [ 6.054726] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  368. [ 6.067675] systemd[1]: Starting Journal Service...
  369. Starting Journal Service...
  370. [ 6.100373] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed.
  371. [ 6.114714] systemd[1]: Mounting NFSD configuration filesystem...
  372. Mounting NFSD configuration filesystem...
  373. [ 6.159199] systemd[1]: Starting Generate network units from Kernel command line...
  374. Starting Generate network …ts from Kernel command line...
  375. [ 6.209215] systemd[1]: Starting Remount Root and Kernel File Systems...
  376. Starting Remount Root and Kernel File Systems...
  377. [ 6.240832] EXT4-fs (mmcblk1p7): re-mounted. Quota mode: disabled.
  378. [ 6.252542] systemd[1]: Starting Apply Kernel Variables...
  379. Starting Apply Kernel Variables...
  380. [ 6.289372] systemd[1]: Starting Coldplug All udev Devices...
  381. Starting Coldplug All udev Devices...
  382. [ 6.335201] systemd[1]: Started RPC Bind.
  383. [ OK ] Started RPC Bind.
  384. [ 6.365199] systemd[1]: Started Journal Service.
  385. [ OK ] Started Journal Service.
  386. [ OK ] Mounted Kernel Debug File System.
  387. [ OK ] Mounted Kernel Trace File System.
  388. [ OK ] Mounted Temporary Directory /tmp.
  389. [ OK ] Finished Create List of Static Device Nodes.
  390. [ OK ] Finished Load Kernel Module configfs.
  391. [ OK ] Finished Load Kernel Module drm.
  392. [ OK ] Finished Load Kernel Module fuse.
  393. [FAILED] Failed to mount NFSD configuration filesystem.
  394. See 'systemctl status proc-fs-nfsd.mount' for details.
  395. [DEPEND] Dependency failed for NFS Mount Daemon.
  396. [DEPEND] Dependency failed for NFS server and services.
  397. [ OK ] Finished Generate network units from Kernel command line.
  398. [ OK ] Finished Remount Root and Kernel File Systems.
  399. [ OK ] Finished Apply Kernel Variables.
  400. Mounting Kernel Configuration File System...
  401. Starting Flush Journal to Persistent Storage...
  402. [ 6.967594] systemd-journald[112]: Received client request to flush runtime journal.
  403. Starting Create System Users...
  404. [ OK ] Mounted Kernel Configuration File System.
  405. [ OK ] Finished Flush Journal to Persistent Storage.
  406. [ OK ] Finished Create System Users.
  407. Starting Create Static Device Nodes in /dev...
  408. [ OK ] Finished Create Static Device Nodes in /dev.
  409. [ OK ] Reached target Preparation for Local File Systems.
  410. Mounting /var/volatile...
  411. Starting Rule-based Manage…for Device Events and Files...
  412. [ OK ] Mounted /var/volatile.
  413. Starting Load/Save Random Seed...
  414. [ OK ] Reached target Local File Systems.
  415. Starting Rebuild Dynamic Linker Cache...
  416. Starting Create Volatile Files and Directories...
  417. [ OK ] Started Rule-based Manager for Device Events and Files.
  418. [ OK ] Finished Coldplug All udev Devices.
  419. [ OK ] Finished Create Volatile Files and Directories.
  420. Starting Rebuild Journal Catalog...
  421. Starting Network Time Synchronization...
  422. Starting Record System Boot/Shutdown in UTMP...
  423. [ OK ] Finished Rebuild Dynamic Linker Cache.
  424. [ OK ] Finished Rebuild Journal Catalog.
  425. Starting Update is Completed...
  426. [ OK ] Finished Record System Boot/Shutdown in UTMP.
  427. [ OK ] Finished Update is Completed.
  428. [ OK ] Started Network Time Synchronization.
  429. [ OK ] Reached target System Initialization.
  430. [ OK ] Started Daily Cleanup of Temporary Directories.
  431. [ OK ] Reached target System Time Set.
  432. [ OK ] Started Daily rotation of log files.
  433. [ OK ] Reached target Timer Units.
  434. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  435. [ OK ] Listening on D-Bus System Message Bus Socket.
  436. Starting sshd.socket...
  437. [ OK ] Listening on sshd.socket.
  438. [ OK ] Reached target Socket Units.
  439. [ OK ] Reached target Basic System.
  440. [ OK ] Started Job spooling tools.
  441. [ OK ] Started Periodic Command Scheduler.
  442. [ 8.887830] Bluetooth: Core ver 2.22
  443. [ 8.892061] NET: Registered PF_BLUETOOTH protocol family
  444. [ 8.898108] Bluetooth: HCI device and connection manager initialized
  445. Starting D-Bus System Message Bus...
  446. [ 8.905341] Bluetooth: HCI socket layer initialized
  447. [ 8.916601] Bluetooth: L2CAP socket layer initialized
  448. [ 8.922310] Bluetooth: SCO socket layer initialized
  449. [ OK ] Started Getty on tty1.
  450. Starting IPv6 Packet Filtering Framework...
  451. [ 8.979425] Bluetooth: HCI UART driver ver 2.3
  452. [ 8.984550] Bluetooth: HCI UART protocol H4 registered
  453. [ 8.990879] Bluetooth: HCI UART protocol Broadcom registered
  454. Starting IPv4 Packet Filtering Framework..[ 8.997468] Bluetooth: HCI UART protocol QCA registered
  455. .
  456. [ 9.041965] Bluetooth: hci0: setting up ROME/QCA6390
  457. [ OK ] Started Serial Getty on ttyS2.
  458. [ OK ] Reached target Login Prompts.
  459. [ OK ] Started System Logging Service.
  460. Starting User Login Management...
  461. Starting OpenSSH Key Generation...
  462. [ OK ] Finished IPv6 Packet Filtering Framework.
  463. [ OK ] Finished IPv4 Packet Filtering Framework.
  464. [ OK ] Finished Load/Save Random Seed.
  465. [ OK ] Started D-Bus System Message Bus.
  466. [ OK ] Started User Login Management.
  467. [ OK ] Reached target Preparation for Network.
  468. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
  469. Starting Bluetooth service...
  470. Starting Network Configuration...
  471. Starting Load/Save RF Kill Switch Status...
  472. [ OK ] Started Load/Save RF Kill Switch Status.
  473. [ OK ] Started Network Configuration.
  474. [ OK ] Started Bluetooth service.
  475. [ OK ] Reached target Bluetooth Support.
  476. Starting Hostname Service...
  477. Starting Network Name Resolution...
  478. [ OK ] Started Hostname Service.
  479.  
  480. OpenEmbedded nodistro.0 neu2-io ttyS2
  481.  
  482. neu2-io login: root
  483. root@neu2-io:~#
  484. root@neu2-io:~#
  485. root@neu2-io:~#
  486. root@neu2-io:~# uname -a
  487. Linux neu2-io 6.1.0-rc3-next-20221102-yocto-standard #1 SMP Tue Nov 29 04:52:56 UTC 2022 armv7l armv7l armv7l GNU/Linux
  488. root@neu2-io:~#
  489. root@neu2-io:~#
  490. root@neu2-io:~#
  491. root@neu2-io:~#
  492. root@neu2-io:~# ifconfig
  493. lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
  494. inet 127.0.0.1 netmask 255.0.0.0
  495. inet6 ::1 prefixlen 128 scopeid 0x10<host>
  496. loop txqueuelen 1000 (Local Loopback)
  497. RX packets 90 bytes 7716 (7.5 KiB)
  498. RX errors 0 dropped 0 overruns 0 frame 0
  499. TX packets 90 bytes 7716 (7.5 KiB)
  500. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  501.  
  502. wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
  503. ether b8:4d:43:38:7c:c5 txqueuelen 1000 (Ethernet)
  504. RX packets 0 bytes 0 (0.0 B)
  505. RX errors 0 dropped 0 overruns 0 frame 0
  506. TX packets 0 bytes 0 (0.0 B)
  507. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  508.  
  509. root@neu2-io:~#
  510.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!