API tools faq
paste
Guest User

Untitled

a guest
Jan 6th, 2025
49
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 57.66 KB | None | 0 0
raw download clone embed print report
  1. 2025-01-07T01:13:00.535Z [V4L2:EZCAP GAME LIN] ezcap Game Link RAW: ezcap Game (video1) [/dev/video1] 1920 x 1080 @ 60 fps nv12 input 0
  2. 2025-01-07T01:13:00.535Z [V4L2:EZCAP GAME LIN] ezcap Game Link RAW: ezcap Game (video1) [/dev/video1] 1280 x 720 @ 60 fps nv12 input 0
  3. 2025-01-07T01:13:00.535Z [V4L2:EZCAP GAME LIN] ezcap Game Link RAW: ezcap Game (video1) [/dev/video1] 2560 x 1440 @ 50 fps yuyv input 0
  4. 2025-01-07T01:13:00.535Z [V4L2:EZCAP GAME LIN] ezcap Game Link RAW: ezcap Game (video1) [/dev/video1] 1920 x 1080 @ 60 fps yuyv input 0
  5. 2025-01-07T01:13:00.535Z [V4L2:EZCAP GAME LIN] ezcap Game Link RAW: ezcap Game (video1) [/dev/video1] 1280 x 720 @ 60 fps yuyv input 0
  6. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:102) P010 was supported on the build machine
  7. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] Restarting video grabber is now blocked due to reloading of the configuration
  8. 2025-01-07T01:13:00.536Z [V4L2:ezcap Game Lin] (GrabberWrapper.cpp:478) Auto resume is: enabled
  9. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
  10. 2025-01-07T01:13:00.536Z [V4L2:ezcap Game Lin] (GrabberWrapper.cpp:180) CEC keycode. Start: 0, stop: 0
  11. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] (Grabber.cpp:253) Set new width: 1920, height: 1080 for capture
  12. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] (Grabber.cpp:429) setWidthHeight preparing to restarting video grabber 0
  13. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] Delayed restart of the grabber due to change of the capturing resolution
  14. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] (Grabber.cpp:367) setBrightnessContrastSaturationHue nothing changed
  15. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:143) setHdrToneMappingMode to: Disabled
  16. 2025-01-07T01:13:00.536Z [AUTOTONEMAPPING] Tone mapping is currently: disabled
  17. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] (Grabber.cpp:276) setFpsSoftwareDecimation to: 2
  18. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] Signal detection is now enabled
  19. 2025-01-07T01:13:00.536Z [SIGNAL_OLD] (DetectionManual.cpp:84) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
  20. 2025-01-07T01:13:00.536Z [SIGNAL_OLD] (DetectionManual.cpp:74) Signal threshold set to: {17, 17, 17} and frames: 200
  21. 2025-01-07T01:13:00.536Z [SIGNAL_AUTO] (DetectionAutomatic.cpp:375) Automatic signal detection -> errorTolerance: 9, modelTolerance: 90, sleepTime: 1000, wakeTime: 0
  22. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] (Grabber.cpp:474) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'ezcap Game Link RAW: ezcap Game (video1)'
  23. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] Delayed restart of the grabber due to change of selected device
  24. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] (Grabber.cpp:294) Force encoding to: NO_CHANGE (old: NO_CHANGE)
  25. 2025-01-07T01:13:00.536Z [V4L2:EZCAP GAME LIN] setQFrameDecimation is now: enabled
  26. 2025-01-07T01:13:00.537Z [X11_SYSTEM:AUTO] Loaded X11 proxy library for screen capturing
  27. 2025-01-07T01:13:00.537Z [DAEMON] The system doesn't support the X11 system grabber
  28. 2025-01-07T01:13:00.537Z [FRAMEBUFFER_SYSTEM:AUTO] Found FrameBuffer device: /dev/fb0
  29. 2025-01-07T01:13:00.537Z [FRAMEBUFFER_SYSTEM:AUTO] Restarting video grabber is now blocked due to reloading of the configuration
  30. 2025-01-07T01:13:00.537Z [FRAMEBUFFER_SYSTEM:AUTO] (Grabber.cpp:253) Set new width: 512, height: 512 for capture
  31. 2025-01-07T01:13:00.537Z [FRAMEBUFFER_SYSTEM:AUTO] (Grabber.cpp:429) setWidthHeight preparing to restarting video grabber 0
  32. 2025-01-07T01:13:00.537Z [FRAMEBUFFER_SYSTEM:AUTO] Delayed restart of the grabber due to change of the capturing resolution
  33. 2025-01-07T01:13:00.537Z [FRAMEBUFFER_SYSTEM:AUTO] Delayed restart of the grabber due to change of the framerate
  34. 2025-01-07T01:13:00.537Z [FRAMEBUFFER_SYSTEM:AUTO] (Grabber.cpp:215) Set hardware acceleration to enabled
  35. 2025-01-07T01:13:00.537Z [FRAMEBUFFER_SYSTEM:AUTO] Delayed restart of the grabber due to change of the hardware acceleration
  36. 2025-01-07T01:13:00.537Z [SIGNAL_OLD] (DetectionManual.cpp:84) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
  37. 2025-01-07T01:13:00.538Z [SIGNAL_OLD] (DetectionManual.cpp:74) Signal threshold set to: {0, 0, 0} and frames: 50
  38. 2025-01-07T01:13:00.538Z [FRAMEBUFFER_SYSTEM:AUTO] (Grabber.cpp:474) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'auto'
  39. 2025-01-07T01:13:00.538Z [FRAMEBUFFER_SYSTEM:AUTO] Delayed restart of the grabber due to change of selected device
  40. 2025-01-07T01:13:00.538Z [X11_SYSTEM:auto] (SystemWrapper.cpp:70) Closing grabber: X11_SYSTEM:auto
  41. 2025-01-07T01:13:00.539Z [AUTOTONEMAPPING] Enabled: no, time to enable: 30s, time to disable: 500ms, thresholds: { 180, 175, 160}
  42. 2025-01-07T01:13:00.588Z [INSTANCE_CFG0] Settings database initialized
  43. 2025-01-07T01:13:00.588Z [COMPONENTCTRL0] (ComponentController.cpp:27) ComponentController is initialized. Components are ENABLED
  44. 2025-01-07T01:13:00.589Z [MUXER0] (Muxer.cpp:54) Muxer initialized
  45. 2025-01-07T01:13:00.589Z [BLACKBORDER] Set mode to: osd
  46. 2025-01-07T01:13:00.589Z [COMPONENTCTRL0] Blackborder detector: enabled
  47. 2025-01-07T01:13:00.589Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:192) Set LED mapping type to advanced
  48. 2025-01-07T01:13:00.589Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:176) setSparseProcessing to 0
  49. 2025-01-07T01:13:00.589Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:103) ImageToLedManager initialized
  50. 2025-01-07T01:13:00.589Z [CHANNEL_GREEN0] (ChannelCalibration.cpp:57) Target: [0, 255, 0, default], Correction: 233
  51. 2025-01-07T01:13:00.589Z [CHANNEL_BLUE0] (ChannelCalibration.cpp:57) Target: [3, 3, 255, active], Correction: 255
  52. 2025-01-07T01:13:00.590Z [COLORSPACE_CALIBRATION0] classicMode: yes, gammas:[3.00, 3.00, 3.00], saturation: 1.00, luminance: 1.00, backLight: [enabled, threshold: 0, colored: no]
  53. 2025-01-07T01:13:00.590Z [LED_CALIBRATION0] (LedCalibration.cpp:101) Calibration config '0' for LED segment: [0, 103]
  54. 2025-01-07T01:13:00.590Z [HYPERHDR0] Led strip RGB order is: rgb
  55. 2025-01-07T01:13:00.591Z [SMOOTHING0] High resolution clock is NOT STEADY!
  56. 2025-01-07T01:13:00.591Z [SMOOTHING0] Clearing queued colors before: enabling
  57. 2025-01-07T01:13:00.591Z [SMOOTHING0] Smoothing queue is cleared
  58. 2025-01-07T01:13:00.591Z [COMPONENTCTRL0] Smoothing: enabled
  59. 2025-01-07T01:13:00.591Z [SMOOTHING0] Creating config (0) => type: Alternative, pause: false, settlingTime: 50ms, interval: 7ms (142Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 500
  60. 2025-01-07T01:13:00.591Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
  61. 2025-01-07T01:13:00.591Z [SMOOTHING0] Smoothing queue is cleared
  62. 2025-01-07T01:13:00.591Z [SMOOTHING0] Selecting config (0) => type: Alternative, pause: false, settlingTime: 50ms, interval: 7ms (142Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 500
  63. 2025-01-07T01:13:00.591Z [SMOOTHING0] Selecting config (0) => type: Alternative, pause: false, settlingTime: 50ms, interval: 7ms (142Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 500
  64. 2025-01-07T01:13:00.591Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'.
  65. 2025-01-07T01:13:00.591Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:336) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":104,"espHandshake":true,"forceSerialDetection":true,"maxRetry":0,"output":"ttyAML1","rate":500000,"refreshTime":7,"smoothingRefreshTime":7,"type":"adalight","white_channel_calibration":false}]
  66. 2025-01-07T01:13:00.591Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 142.86 Hz
  67. 2025-01-07T01:13:00.591Z [HYPER_MANAGER] HyperHDR instance 'First LED instance' has been started
  68. 2025-01-07T01:13:00.591Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:422) Refresh rate = 142.86 Hz
  69. 2025-01-07T01:13:00.591Z [HYPERHDR0] The instance is running
  70. 2025-01-07T01:13:00.591Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:372) Device is not ready to start a timer
  71. 2025-01-07T01:13:00.591Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:432) Refresh interval updated to 7ms
  72. 2025-01-07T01:13:00.591Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) DeviceType : adalight
  73. 2025-01-07T01:13:00.591Z [MUXER0] Register new input 'System/VIDEOGRABBER' with priority 240 as inactive
  74. 2025-01-07T01:13:00.591Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) LedCount : 104
  75. 2025-01-07T01:13:00.591Z [COMPONENTCTRL0] Video capture device: enabled
  76. 2025-01-07T01:13:00.591Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:52) RefreshTime : 7
  77. 2025-01-07T01:13:00.591Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Device name : ttyAML1
  78. 2025-01-07T01:13:00.591Z [V4L2:EZCAP GAME LIN] Multithreading for V4L2 is enabled. Available thread's count 4
  79. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) Auto selection: 0
  80. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Baud rate : 500000
  81. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) ESP handshake : ON
  82. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:71) Force ESP/Pico Detection : ON
  83. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:72) Delayed open : 0
  84. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:73) Retry limit : 0
  85. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it).
  86. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] (DriverSerialAdalight.cpp:78) Adalight driver with activated high speeed & data integration check AWA protocol
  87. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] (DriverSerialAdalight.cpp:87) Adalight header for 104 leds: Awa 0x00 0x67 0x32
  88. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:246) Enable the device
  89. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyAML1
  90. 2025-01-07T01:13:00.592Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyAML1, Baud rate [500000]bps
  91. 2025-01-07T01:13:00.592Z [V4L2:EZCAP GAME LIN] Found capture device: /dev/video1
  92. 2025-01-07T01:13:00.592Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:425) Device has 'brightness' control => min: -100, max: 100, default: 0
  93. 2025-01-07T01:13:00.592Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:431) Device has 'contrast' control => min: 50, max: 200, default: 100
  94. 2025-01-07T01:13:00.592Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:437) Device has 'saturation' control => min: 0, max: 200, default: 100
  95. 2025-01-07T01:13:00.592Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:443) Device has 'hue' control => min: -90, max: 90, default: 0
  96. 2025-01-07T01:13:00.592Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:529) /dev/video1 1920 x 1080 @ 30 fps NO_CHANGE (unsupported)
  97. 2025-01-07T01:13:00.592Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:529) /dev/video1 1280 x 720 @ 60 fps NO_CHANGE (unsupported)
  98. 2025-01-07T01:13:00.593Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:232) Searching for ezcap Game Link RAW: ezcap Game (video1) 1920 x 1080 @ 0 fps, input: -1 (NO_CHANGE)
  99. 2025-01-07T01:13:00.593Z [V4L2:EZCAP GAME LIN] *************************************************************************************************
  100. 2025-01-07T01:13:00.593Z [V4L2:EZCAP GAME LIN] Starting V4L2 grabber. Selected: ezcap Game Link RAW: ezcap Game (video1) [/dev/video1] 1920 x 1080 @ 60 fps nv12 input -1
  101. 2025-01-07T01:13:00.593Z [V4L2:EZCAP GAME LIN] *************************************************************************************************
  102. 2025-01-07T01:13:00.593Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:867) Hardware cropping is not supported: ignoring
  103. 2025-01-07T01:13:00.593Z [V4L2:EZCAP GAME LIN] Set device input to: Camera 1
  104. 2025-01-07T01:13:00.594Z [FLATBUFSERVER] Tone mapping: 0
  105. 2025-01-07T01:13:00.594Z [WEBSERVER] Initialize Webserver
  106. 2025-01-07T01:13:00.594Z [V4L2:EZCAP GAME LIN] Set resolution to: 1920 x 1080
  107. 2025-01-07T01:13:00.594Z [FLATBUFSERVER] Started on port 19400
  108. 2025-01-07T01:13:00.594Z [FLATBUFSERVER] Started local domain socket server: 'hyperhdr-domain'
  109. 2025-01-07T01:13:00.594Z [FLATBUFSERVER] Tone mapping: 0
  110. 2025-01-07T01:13:00.594Z [FLATBUFSERVER] NV12 quarter of frame mode: 0
  111. 2025-01-07T01:13:00.595Z [V4L2:EZCAP GAME LIN] Set framerate to 60 FPS
  112. 2025-01-07T01:13:00.595Z [NETFORWARDER] Forwarder has changed state to disabled
  113. 2025-01-07T01:13:00.595Z [V4L2:EZCAP GAME LIN] Brightness set to: 0 (default)
  114. 2025-01-07T01:13:00.595Z [PROTOSERVER] Started on port 19445
  115. 2025-01-07T01:13:00.595Z [V4L2:EZCAP GAME LIN] Contrast set to: 100 (default)
  116. 2025-01-07T01:13:00.595Z [V4L2:EZCAP GAME LIN] Saturation set to: 100 (default)
  117. 2025-01-07T01:13:00.595Z [V4L2:EZCAP GAME LIN] Hue set to: 0 (default)
  118. 2025-01-07T01:13:00.595Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
  119. 2025-01-07T01:13:00.595Z [V4L2:EZCAP GAME LIN] (LutLoader.cpp:59) LUT file found: /home/wouter/.hyperhdr/lut_lin_tables.3d
  120. 2025-01-07T01:13:00.596Z [V4L2:EZCAP GAME LIN] (LutLoader.cpp:74) Index 2 for YUV
  121. 2025-01-07T01:13:00.609Z [WEBSERVER] Apply Webserver settings
  122. 2025-01-07T01:13:00.609Z [WEBSERVER] Set document root to: :/www
  123. 2025-01-07T01:13:00.610Z [WEBSERVER] Started: 'HyperHDR WebServer (HTTP)' on port: 8090
  124. 2025-01-07T01:13:00.610Z [SSDP] (SSDPHandler.cpp:93) The local address is empty
  125. 2025-01-07T01:13:00.610Z [WEBSERVER] Initialize Webserver
  126. 2025-01-07T01:13:00.610Z [WEBSERVER] Apply Webserver settings
  127. 2025-01-07T01:13:00.610Z [WEBSERVER] Set document root to: :/www
  128. 2025-01-07T01:13:00.616Z [WEBSERVER] Setup SSL certificate
  129. 2025-01-07T01:13:00.616Z [WEBSERVER] Setup private SSL key
  130. 2025-01-07T01:13:00.617Z [WEBSERVER] Started: 'HyperHDR WebServer (HTTPS)' on port: 8092
  131. 2025-01-07T01:13:00.617Z [SSDP] (SSDPHandler.cpp:42) SSDPHandler is initializing
  132. 2025-01-07T01:13:00.617Z [SSDP] (SSDPHandler.cpp:183) The local address is: 192.168.1.34
  133. 2025-01-07T01:13:00.617Z [SSDP] (SSDPServer.cpp:94) Initialize the SSDP server
  134. 2025-01-07T01:13:00.618Z [SSDP] Starting the SSDP server
  135. 2025-01-07T01:13:00.623Z [V4L2:EZCAP GAME LIN] Found and loaded LUT: '/home/wouter/.hyperhdr/lut_lin_tables.3d'
  136. 2025-01-07T01:13:00.624Z [V4L2:EZCAP GAME LIN] Video pixel format is set to: NV12
  137. 2025-01-07T01:13:00.628Z [V4L2:EZCAP GAME LIN] Started
  138. 2025-01-07T01:13:00.650Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName: ttyAML1
  139. 2025-01-07T01:13:00.650Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation: /dev/ttyAML1
  140. 2025-01-07T01:13:00.650Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description:
  141. 2025-01-07T01:13:00.650Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer:
  142. 2025-01-07T01:13:00.650Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0x0
  143. 2025-01-07T01:13:00.650Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier: 0x0
  144. 2025-01-07T01:13:00.650Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber:
  145. 2025-01-07T01:13:00.650Z [LEDDEVICE0_ADALIGHT] Force ESP/Pico detection override enabled. HyperHDR skips the reset. State: 1, 1
  146. 2025-01-07T01:13:00.851Z [MUXER0] Set visible priority to 255
  147. 2025-01-07T01:13:00.851Z [HYPERHDR0] New priority[255], previous [255]
  148. 2025-01-07T01:13:00.851Z [HYPERHDR0] No source left -> switch LED-Device off
  149. 2025-01-07T01:13:00.851Z [SMOOTHING0] Clearing queued colors before: disabling
  150. 2025-01-07T01:13:00.851Z [SMOOTHING0] Smoothing queue is cleared
  151. 2025-01-07T01:13:00.851Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 0
  152. 2025-01-07T01:13:01.040Z [V4L2:EZCAP GAME LIN] (V4L2Grabber.cpp:1231) Worker's thread count = 4
  153. 2025-01-07T01:13:01.060Z [MUXER0] Priority 240 is now active
  154. 2025-01-07T01:13:01.060Z [MUXER0] Set visible priority to 240
  155. 2025-01-07T01:13:01.060Z [HYPERHDR0] New priority[240], previous [255]
  156. 2025-01-07T01:13:01.060Z [HYPERHDR0] New source available -> switch LED-Device on
  157. 2025-01-07T01:13:01.060Z [SMOOTHING0] Clearing queued colors before: enabling
  158. 2025-01-07T01:13:01.060Z [SMOOTHING0] Smoothing queue is cleared
  159. 2025-01-07T01:13:01.060Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 1
  160. 2025-01-07T01:13:01.061Z [IMAGETOLED_MNG0] Total index number is: 59024 (memory: 59024). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  161. 2025-01-07T01:13:01.061Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  162. 2025-01-07T01:13:01.133Z [WEBSERVER] Web server resources initialized: /usr/share/hyperhdr/bin/../lib/web_resources.rcc
  163. 2025-01-07T01:13:01.652Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device
  164. 2025-01-07T01:13:01.652Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on
  165. 2025-01-07T01:13:01.652Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On
  166. 2025-01-07T01:13:01.652Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 7ms
  167. 2025-01-07T01:13:01.652Z [COMPONENTCTRL0] LED device: enabled
  168. 2025-01-07T01:13:01.652Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
  169. 2025-01-07T01:13:01.652Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
  170. 2025-01-07T01:13:01.652Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off
  171. 2025-01-07T01:13:01.652Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:543) Set LED strip to black/power off
  172. 2025-01-07T01:13:01.652Z [SMOOTHING0] Using alternative smoothing input (0)
  173. 2025-01-07T01:13:01.652Z [EFFECTENGINE0] Run effect "Rainbow swirl fast" on channel 0
  174. 2025-01-07T01:13:01.653Z [EFFECTENGINE0] (EffectEngine.cpp:92) Start the effect: name [Rainbow swirl fast]
  175. 2025-01-07T01:13:01.653Z [MUXER0] Register new input 'System/EFFECT' with priority 0 as inactive
  176. 2025-01-07T01:13:01.653Z [HYPERHDR0] Boot effect: animation set to 'Rainbow swirl fast' [started]
  177. 2025-01-07T01:13:01.653Z [EFFECT0(Rainbo...)] Begin playing the effect with priority: 0
  178. 2025-01-07T01:13:01.654Z [MUXER0] Priority 0 is now active
  179. 2025-01-07T01:13:01.654Z [MUXER0] Set visible priority to 0
  180. 2025-01-07T01:13:01.654Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
  181. 2025-01-07T01:13:01.654Z [SMOOTHING0] Smoothing queue is cleared
  182. 2025-01-07T01:13:01.654Z [SMOOTHING0] Selecting config (1) => type: Linear, pause: false, settlingTime: 200ms, interval: 40ms (25Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
  183. 2025-01-07T01:13:01.654Z [SMOOTHING0] Using linear smoothing input (1)
  184. 2025-01-07T01:13:01.654Z [HYPERHDR0] New priority[0], previous [240]
  185. 2025-01-07T01:13:01.654Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 0
  186. 2025-01-07T01:13:01.654Z [IMAGETOLED_MNG0] Total index number is: 400 (memory: 400). User sparse processing is: disabled, image size: 80 x 45, area number: 104
  187. 2025-01-07T01:13:01.659Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
  188. 2025-01-07T01:13:02.111Z [SERVICE_mDNS] Starting the network discovery thread
  189. 2025-01-07T01:13:02.260Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyAML1
  190. 2025-01-07T01:13:02.260Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:246) Enable the device
  191. 2025-01-07T01:13:02.260Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyAML1
  192. 2025-01-07T01:13:02.260Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyAML1, Baud rate [500000]bps
  193. 2025-01-07T01:13:02.260Z [COMPONENTCTRL0] LED device: disabled
  194. 2025-01-07T01:13:02.286Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName: ttyAML1
  195. 2025-01-07T01:13:02.286Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation: /dev/ttyAML1
  196. 2025-01-07T01:13:02.286Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description:
  197. 2025-01-07T01:13:02.286Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer:
  198. 2025-01-07T01:13:02.286Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0x0
  199. 2025-01-07T01:13:02.286Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier: 0x0
  200. 2025-01-07T01:13:02.286Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber:
  201. 2025-01-07T01:13:02.286Z [LEDDEVICE0_ADALIGHT] Force ESP/Pico detection override enabled. HyperHDR skips the reset. State: 1, 1
  202. 2025-01-07T01:13:02.314Z [NET_DISCOVERY] Found WLED at 192.168.1.37:80 (wled.local)
  203. 2025-01-07T01:13:03.194Z [WEBSOCKET] (WebSocketClient.cpp:40) New connection from ::ffff:192.168.1.20
  204. 2025-01-07T01:13:03.206Z [WEBSOCKET] (WebSocketClient.cpp:40) New connection from ::ffff:192.168.1.20
  205. 2025-01-07T01:13:03.288Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device
  206. 2025-01-07T01:13:03.288Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on
  207. 2025-01-07T01:13:03.288Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On
  208. 2025-01-07T01:13:03.288Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 7ms
  209. 2025-01-07T01:13:03.288Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
  210. 2025-01-07T01:13:03.288Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 25.00 Hz
  211. 2025-01-07T01:13:03.288Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:422) Refresh rate = 25.00 Hz
  212. 2025-01-07T01:13:03.288Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 40ms
  213. 2025-01-07T01:13:03.288Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:432) Refresh interval updated to 40ms
  214. 2025-01-07T01:13:03.288Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:447) LED refresh interval adjustment caused by smoothing configuration change to 40ms (proposed: 40ms)
  215. 2025-01-07T01:13:03.288Z [COMPONENTCTRL0] LED device: enabled
  216. 2025-01-07T01:13:03.368Z [SMOOTHING0] Using linear smoothing procedure (1)
  217. 2025-01-07T01:13:03.460Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":88}]
  218. 2025-01-07T01:13:03.487Z [WEBSOCKET] (HyperAPI.cpp:1121) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyAML0)","value":"ttyAML0"},{"name":" (/dev/ttyAML1)","value":"ttyAML1"}],"ledDeviceType":"adalight"}]
  219. 2025-01-07T01:13:03.487Z [WEBSOCKET] (HyperAPI.cpp:946) log streaming activated for client ::ffff:192.168.1.20
  220. 2025-01-07T01:13:04.657Z [EFFECT0(Rainbo...)] The effect quits with priority: 0
  221. 2025-01-07T01:13:04.657Z [MUXER0] Removed source priority 0
  222. 2025-01-07T01:13:04.657Z [MUXER0] Set visible priority to 240
  223. 2025-01-07T01:13:04.657Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
  224. 2025-01-07T01:13:04.657Z [SMOOTHING0] Smoothing queue is cleared
  225. 2025-01-07T01:13:04.657Z [SMOOTHING0] Selecting config (0) => type: Alternative, pause: false, settlingTime: 50ms, interval: 7ms (142Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 500
  226. 2025-01-07T01:13:04.657Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
  227. 2025-01-07T01:13:04.657Z [SMOOTHING0] Using alternative smoothing input (0)
  228. 2025-01-07T01:13:04.657Z [HYPERHDR0] New priority[240], previous [0]
  229. 2025-01-07T01:13:04.657Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 142.86 Hz
  230. 2025-01-07T01:13:04.657Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:422) Refresh rate = 142.86 Hz
  231. 2025-01-07T01:13:04.657Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 1
  232. 2025-01-07T01:13:04.657Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 7ms
  233. 2025-01-07T01:13:04.657Z [EFFECTENGINE0] Effect 'Rainbow swirl fast' has finished.
  234. 2025-01-07T01:13:04.657Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:432) Refresh interval updated to 7ms
  235. 2025-01-07T01:13:04.657Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:447) LED refresh interval adjustment caused by smoothing configuration change to 7ms (proposed: 7ms)
  236. 2025-01-07T01:13:04.657Z [EFFECT0(Rainbo...)] Effect named: 'Rainbow swirl fast' is deleted
  237. 2025-01-07T01:13:04.671Z [SMOOTHING0] Using alternative smoothing procedure (0)
  238. 2025-01-07T01:13:04.684Z [IMAGETOLED_MNG0] Total index number is: 59024 (memory: 59024). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  239. 2025-01-07T01:13:51.463Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  240. 2025-01-07T01:13:54.899Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  241. 2025-01-07T01:13:59.334Z [WEBSOCKET] (HyperAPI.cpp:955) log streaming deactivated for client ::ffff:192.168.1.20
  242. 2025-01-07T01:14:02.842Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":794}]
  243. 2025-01-07T01:14:02.868Z [WEBSOCKET] (HyperAPI.cpp:1121) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyAML0)","value":"ttyAML0"},{"name":" (/dev/ttyAML1)","value":"ttyAML1"}],"ledDeviceType":"adalight"}]
  244. 2025-01-07T01:14:07.592Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}]
  245. 2025-01-07T01:14:09.364Z [SMOOTHING0] Clearing queued colors before: disabling
  246. 2025-01-07T01:14:09.364Z [SMOOTHING0] Smoothing queue is cleared
  247. 2025-01-07T01:14:09.364Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
  248. 2025-01-07T01:14:09.364Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
  249. 2025-01-07T01:14:09.364Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off
  250. 2025-01-07T01:14:09.364Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:543) Set LED strip to black/power off
  251. 2025-01-07T01:14:09.372Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
  252. 2025-01-07T01:14:09.378Z [SMOOTHING0] Using alternative smoothing input (0)
  253. 2025-01-07T01:14:09.973Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyAML1
  254. 2025-01-07T01:14:09.973Z [COMPONENTCTRL0] LED device: disabled
  255. 2025-01-07T01:14:11.224Z [SMOOTHING0] Clearing queued colors before: enabling
  256. 2025-01-07T01:14:11.224Z [SMOOTHING0] Smoothing queue is cleared
  257. 2025-01-07T01:14:11.224Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:246) Enable the device
  258. 2025-01-07T01:14:11.224Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyAML1
  259. 2025-01-07T01:14:11.224Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyAML1, Baud rate [500000]bps
  260. 2025-01-07T01:14:11.273Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName: ttyAML1
  261. 2025-01-07T01:14:11.273Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation: /dev/ttyAML1
  262. 2025-01-07T01:14:11.273Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description:
  263. 2025-01-07T01:14:11.273Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer:
  264. 2025-01-07T01:14:11.273Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0x0
  265. 2025-01-07T01:14:11.274Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier: 0x0
  266. 2025-01-07T01:14:11.274Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber:
  267. 2025-01-07T01:14:11.274Z [LEDDEVICE0_ADALIGHT] Force ESP/Pico detection override enabled. HyperHDR skips the reset. State: 1, 1
  268. 2025-01-07T01:14:12.276Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device
  269. 2025-01-07T01:14:12.276Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on
  270. 2025-01-07T01:14:12.276Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On
  271. 2025-01-07T01:14:12.276Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 7ms
  272. 2025-01-07T01:14:12.276Z [COMPONENTCTRL0] LED device: enabled
  273. 2025-01-07T01:14:12.277Z [SMOOTHING0] Using alternative smoothing input (0)
  274. 2025-01-07T01:14:12.291Z [SMOOTHING0] Using alternative smoothing procedure (0)
  275. 2025-01-07T01:14:18.017Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":467}]
  276. 2025-01-07T01:14:18.043Z [WEBSOCKET] (HyperAPI.cpp:1121) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyAML0)","value":"ttyAML0"},{"name":" (/dev/ttyAML1)","value":"ttyAML1"}],"ledDeviceType":"adalight"}]
  277. 2025-01-07T01:14:20.158Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  278. 2025-01-07T01:14:23.459Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  279. 2025-01-07T01:14:23.742Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:285) Stop device
  280. 2025-01-07T01:14:23.742Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
  281. 2025-01-07T01:14:23.742Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
  282. 2025-01-07T01:14:23.742Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off
  283. 2025-01-07T01:14:23.742Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:543) Set LED strip to black/power off
  284. 2025-01-07T01:14:23.748Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
  285. 2025-01-07T01:14:24.350Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyAML1
  286. 2025-01-07T01:14:24.350Z [LEDDEVICE0_ADALIGHT] Stopped LedDevice 'adalight'
  287. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'.
  288. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:336) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":104,"espHandshake":true,"forceSerialDetection":true,"hardwareLedCount":null,"maxRetry":0,"output":"ttyAML0","rate":500000,"refreshTime":7,"smoothingRefreshTime":7,"type":"adalight","white_channel_calibration":false}]
  289. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 142.86 Hz
  290. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:422) Refresh rate = 142.86 Hz
  291. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:372) Device is not ready to start a timer
  292. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:432) Refresh interval updated to 7ms
  293. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) DeviceType : adalight
  294. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) LedCount : 104
  295. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:52) RefreshTime : 7
  296. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Device name : ttyAML0
  297. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) Auto selection: 0
  298. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Baud rate : 500000
  299. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) ESP handshake : ON
  300. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:71) Force ESP/Pico Detection : ON
  301. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:72) Delayed open : 0
  302. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:73) Retry limit : 0
  303. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it).
  304. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (DriverSerialAdalight.cpp:78) Adalight driver with activated high speeed & data integration check AWA protocol
  305. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (DriverSerialAdalight.cpp:87) Adalight header for 104 leds: Awa 0x00 0x67 0x32
  306. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:246) Enable the device
  307. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyAML0
  308. 2025-01-07T01:14:24.351Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyAML0, Baud rate [500000]bps
  309. 2025-01-07T01:14:24.353Z [COMPONENTCTRL0] LED device: disabled
  310. 2025-01-07T01:14:24.377Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName: ttyAML0
  311. 2025-01-07T01:14:24.377Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation: /dev/ttyAML0
  312. 2025-01-07T01:14:24.377Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description:
  313. 2025-01-07T01:14:24.377Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer:
  314. 2025-01-07T01:14:24.377Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0x0
  315. 2025-01-07T01:14:24.377Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier: 0x0
  316. 2025-01-07T01:14:24.377Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber:
  317. 2025-01-07T01:14:24.377Z [LEDDEVICE0_ADALIGHT] Force ESP/Pico detection override enabled. HyperHDR skips the reset. State: 1, 1
  318. 2025-01-07T01:14:25.192Z [WEBSOCKET] (HyperAPI.cpp:946) log streaming activated for client ::ffff:192.168.1.20
  319. 2025-01-07T01:14:25.342Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  320. 2025-01-07T01:14:25.379Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device
  321. 2025-01-07T01:14:25.379Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on
  322. 2025-01-07T01:14:25.379Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On
  323. 2025-01-07T01:14:25.379Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 7ms
  324. 2025-01-07T01:14:25.379Z [COMPONENTCTRL0] LED device: enabled
  325. 2025-01-07T01:14:29.114Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  326. 2025-01-07T01:14:39.287Z [WEBSOCKET] (HyperAPI.cpp:955) log streaming deactivated for client ::ffff:192.168.1.20
  327. 2025-01-07T01:14:39.360Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":847}]
  328. 2025-01-07T01:14:39.386Z [WEBSOCKET] (HyperAPI.cpp:1121) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyAML0)","value":"ttyAML0"},{"name":" (/dev/ttyAML1)","value":"ttyAML1"}],"ledDeviceType":"adalight"}]
  329. 2025-01-07T01:14:43.286Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:285) Stop device
  330. 2025-01-07T01:14:43.286Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
  331. 2025-01-07T01:14:43.286Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
  332. 2025-01-07T01:14:43.286Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off
  333. 2025-01-07T01:14:43.286Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:543) Set LED strip to black/power off
  334. 2025-01-07T01:14:43.298Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
  335. 2025-01-07T01:14:43.900Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyAML0
  336. 2025-01-07T01:14:43.900Z [LEDDEVICE0_ADALIGHT] Stopped LedDevice 'adalight'
  337. 2025-01-07T01:14:43.900Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'.
  338. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:336) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":104,"espHandshake":true,"forceSerialDetection":true,"hardwareLedCount":null,"maxRetry":0,"output":"ttyAML1","rate":500000,"refreshTime":7,"smoothingRefreshTime":7,"type":"adalight","white_channel_calibration":false}]
  339. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 142.86 Hz
  340. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:422) Refresh rate = 142.86 Hz
  341. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:372) Device is not ready to start a timer
  342. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:432) Refresh interval updated to 7ms
  343. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) DeviceType : adalight
  344. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) LedCount : 104
  345. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:52) RefreshTime : 7
  346. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Device name : ttyAML1
  347. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) Auto selection: 0
  348. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Baud rate : 500000
  349. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) ESP handshake : ON
  350. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:71) Force ESP/Pico Detection : ON
  351. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:72) Delayed open : 0
  352. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:73) Retry limit : 0
  353. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it).
  354. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (DriverSerialAdalight.cpp:78) Adalight driver with activated high speeed & data integration check AWA protocol
  355. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (DriverSerialAdalight.cpp:87) Adalight header for 104 leds: Awa 0x00 0x67 0x32
  356. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:246) Enable the device
  357. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyAML1
  358. 2025-01-07T01:14:43.901Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyAML1, Baud rate [500000]bps
  359. 2025-01-07T01:14:43.903Z [COMPONENTCTRL0] LED device: disabled
  360. 2025-01-07T01:14:43.938Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName: ttyAML1
  361. 2025-01-07T01:14:43.938Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation: /dev/ttyAML1
  362. 2025-01-07T01:14:43.938Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description:
  363. 2025-01-07T01:14:43.938Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer:
  364. 2025-01-07T01:14:43.938Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0x0
  365. 2025-01-07T01:14:43.938Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier: 0x0
  366. 2025-01-07T01:14:43.938Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber:
  367. 2025-01-07T01:14:43.939Z [LEDDEVICE0_ADALIGHT] Force ESP/Pico detection override enabled. HyperHDR skips the reset. State: 1, 1
  368. 2025-01-07T01:14:44.940Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device
  369. 2025-01-07T01:14:44.940Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on
  370. 2025-01-07T01:14:44.940Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On
  371. 2025-01-07T01:14:44.940Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 7ms
  372. 2025-01-07T01:14:44.940Z [COMPONENTCTRL0] LED device: enabled
  373. 2025-01-07T01:14:45.305Z [WEBSOCKET] (HyperAPI.cpp:946) log streaming activated for client ::ffff:192.168.1.20
  374. 2025-01-07T01:14:58.058Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  375. 2025-01-07T01:15:00.026Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  376. 2025-01-07T01:15:00.456Z [V4L2:EZCAP GAME LIN] Video cache: size: 2, hits: 3577, needed: 1, cleanup: 0, limit: 8
  377. 2025-01-07T01:15:12.543Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  378. 2025-01-07T01:15:14.507Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  379. 2025-01-07T01:15:30.429Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  380. 2025-01-07T01:15:31.466Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  381. 2025-01-07T01:15:33.536Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  382. 2025-01-07T01:15:37.075Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  383. 2025-01-07T01:16:00.453Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 9ms, frames = 1798, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1798], [LED0: FPS = 142.85, send = 8571, processed = 8571, dropped = 0]
  384. 2025-01-07T01:17:00.474Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 5ms, frames = 1799, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1798], [LED0: FPS = 142.86, send = 8571, processed = 8571, dropped = 0]
  385. 2025-01-07T01:17:07.350Z [IMAGETOLED_MNG0] Total index number is: 40324 (memory: 40324). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  386. 2025-01-07T01:17:16.997Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  387. 2025-01-07T01:17:37.915Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  388. 2025-01-07T01:17:39.684Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  389. 2025-01-07T01:17:41.551Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  390. 2025-01-07T01:17:45.889Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  391. 2025-01-07T01:17:51.062Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  392. 2025-01-07T01:17:54.064Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  393. 2025-01-07T01:18:00.466Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 6ms, frames = 1798, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1798], [LED0: FPS = 142.86, send = 8572, processed = 8572, dropped = 0]
  394. 2025-01-07T01:19:00.463Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 6ms, frames = 1798, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.98, processed = 1799], [LED0: FPS = 142.85, send = 8571, processed = 8571, dropped = 0]
  395. 2025-01-07T01:19:21.113Z [WEBSOCKET] (HyperAPI.cpp:955) log streaming deactivated for client ::ffff:192.168.1.20
  396. 2025-01-07T01:19:24.833Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":961}]
  397. 2025-01-07T01:19:24.859Z [WEBSOCKET] (HyperAPI.cpp:1121) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyAML0)","value":"ttyAML0"},{"name":" (/dev/ttyAML1)","value":"ttyAML1"}],"ledDeviceType":"adalight"}]
  398. 2025-01-07T01:19:30.535Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:285) Stop device
  399. 2025-01-07T01:19:30.535Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
  400. 2025-01-07T01:19:30.535Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
  401. 2025-01-07T01:19:30.535Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off
  402. 2025-01-07T01:19:30.535Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:543) Set LED strip to black/power off
  403. 2025-01-07T01:19:30.546Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
  404. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyAML1
  405. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] Stopped LedDevice 'adalight'
  406. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:285) Stop device
  407. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
  408. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] Stopped LedDevice 'adalight'
  409. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'.
  410. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:336) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":104,"espHandshake":true,"forceSerialDetection":true,"hardwareLedCount":null,"maxRetry":0,"output":"ttyAML0","rate":500000,"refreshTime":7,"smoothingRefreshTime":7,"type":"adalight","white_channel_calibration":false}]
  411. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 142.86 Hz
  412. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:422) Refresh rate = 142.86 Hz
  413. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:372) Device is not ready to start a timer
  414. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:432) Refresh interval updated to 7ms
  415. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) DeviceType : adalight
  416. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) LedCount : 104
  417. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:52) RefreshTime : 7
  418. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Device name : ttyAML0
  419. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) Auto selection: 0
  420. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Baud rate : 500000
  421. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) ESP handshake : ON
  422. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:71) Force ESP/Pico Detection : ON
  423. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:72) Delayed open : 0
  424. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:73) Retry limit : 0
  425. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it).
  426. 2025-01-07T01:19:31.148Z [LEDDEVICE0_ADALIGHT] (DriverSerialAdalight.cpp:78) Adalight driver with activated high speeed & data integration check AWA protocol
  427. 2025-01-07T01:19:31.149Z [LEDDEVICE0_ADALIGHT] (DriverSerialAdalight.cpp:87) Adalight header for 104 leds: Awa 0x00 0x67 0x32
  428. 2025-01-07T01:19:31.149Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:246) Enable the device
  429. 2025-01-07T01:19:31.149Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyAML0
  430. 2025-01-07T01:19:31.149Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyAML0, Baud rate [500000]bps
  431. 2025-01-07T01:19:31.150Z [COMPONENTCTRL0] LED device: disabled
  432. 2025-01-07T01:19:31.151Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 6ms, frames = 1798, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.98, processed = 1799]
  433. 2025-01-07T01:19:31.174Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName: ttyAML0
  434. 2025-01-07T01:19:31.174Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation: /dev/ttyAML0
  435. 2025-01-07T01:19:31.174Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description:
  436. 2025-01-07T01:19:31.174Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer:
  437. 2025-01-07T01:19:31.174Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0x0
  438. 2025-01-07T01:19:31.175Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier: 0x0
  439. 2025-01-07T01:19:31.175Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber:
  440. 2025-01-07T01:19:31.175Z [LEDDEVICE0_ADALIGHT] Force ESP/Pico detection override enabled. HyperHDR skips the reset. State: 1, 1
  441. 2025-01-07T01:19:32.176Z [LEDDEVICE0_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device
  442. 2025-01-07T01:19:32.177Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on
  443. 2025-01-07T01:19:32.177Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On
  444. 2025-01-07T01:19:32.177Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 7ms
  445. 2025-01-07T01:19:32.177Z [COMPONENTCTRL0] LED device: enabled
  446. 2025-01-07T01:19:38.499Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:285) Stop device
  447. 2025-01-07T01:19:38.499Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
  448. 2025-01-07T01:19:38.499Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
  449. 2025-01-07T01:19:38.499Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off
  450. 2025-01-07T01:19:38.499Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:543) Set LED strip to black/power off
  451. 2025-01-07T01:19:38.512Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
  452. 2025-01-07T01:19:39.113Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyAML0
  453. 2025-01-07T01:19:39.113Z [LEDDEVICE0_ADALIGHT] Stopped LedDevice 'adalight'
  454. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'.
  455. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:336) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":104,"espHandshake":false,"forceSerialDetection":true,"hardwareLedCount":null,"maxRetry":0,"output":"ttyAML0","rate":500000,"refreshTime":7,"smoothingRefreshTime":7,"type":"adalight","white_channel_calibration":false}]
  456. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 142.86 Hz
  457. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:422) Refresh rate = 142.86 Hz
  458. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:372) Device is not ready to start a timer
  459. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:432) Refresh interval updated to 7ms
  460. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) DeviceType : adalight
  461. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) LedCount : 104
  462. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:52) RefreshTime : 7
  463. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Device name : ttyAML0
  464. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) Auto selection: 0
  465. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Baud rate : 500000
  466. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) ESP handshake : OFF
  467. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:71) Force ESP/Pico Detection : ON
  468. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:72) Delayed open : 0
  469. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:73) Retry limit : 0
  470. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it).
  471. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (DriverSerialAdalight.cpp:78) Adalight driver with activated high speeed & data integration check AWA protocol
  472. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (DriverSerialAdalight.cpp:87) Adalight header for 104 leds: Awa 0x00 0x67 0x32
  473. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:246) Enable the device
  474. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyAML0
  475. 2025-01-07T01:19:39.114Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyAML0, Baud rate [500000]bps
  476. 2025-01-07T01:19:39.116Z [COMPONENTCTRL0] LED device: disabled
  477. 2025-01-07T01:19:39.152Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName: ttyAML0
  478. 2025-01-07T01:19:39.152Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation: /dev/ttyAML0
  479. 2025-01-07T01:19:39.152Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description:
  480. 2025-01-07T01:19:39.152Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer:
  481. 2025-01-07T01:19:39.152Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0x0
  482. 2025-01-07T01:19:39.152Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier: 0x0
  483. 2025-01-07T01:19:39.152Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber:
  484. 2025-01-07T01:19:39.152Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on
  485. 2025-01-07T01:19:39.152Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On
  486. 2025-01-07T01:19:39.152Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 7ms
  487. 2025-01-07T01:19:39.152Z [COMPONENTCTRL0] LED device: enabled
  488. 2025-01-07T01:21:00.476Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 7ms, frames = 1799, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1798], [LED0: FPS = 142.86, send = 8572, processed = 8572, dropped = 0]
  489. 2025-01-07T01:21:36.120Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  490. 2025-01-07T01:21:37.187Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  491. 2025-01-07T01:21:47.066Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  492. 2025-01-07T01:21:50.869Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  493. 2025-01-07T01:22:00.480Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 5ms, frames = 1798, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1799], [LED0: FPS = 142.86, send = 8571, processed = 8571, dropped = 0]
  494. 2025-01-07T01:22:05.017Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  495. 2025-01-07T01:22:08.526Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  496. 2025-01-07T01:23:00.476Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 5ms, frames = 1798, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1798], [LED0: FPS = 142.85, send = 8572, processed = 8572, dropped = 0]
  497. 2025-01-07T01:23:16.795Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  498. 2025-01-07T01:23:19.064Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  499. 2025-01-07T01:24:00.477Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 5ms, frames = 1798, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1798], [LED0: FPS = 142.86, send = 8571, processed = 8571, dropped = 0]
  500. 2025-01-07T01:24:26.725Z [WEBSOCKET] (HyperAPI.cpp:946) log streaming activated for client ::ffff:192.168.1.20
  501. 2025-01-07T01:24:55.830Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  502. 2025-01-07T01:24:58.776Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  503. 2025-01-07T01:25:00.470Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 6ms, frames = 1798, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1798], [LED0: FPS = 142.85, send = 8572, processed = 8572, dropped = 0]
  504. 2025-01-07T01:25:09.712Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  505. 2025-01-07T01:25:12.381Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  506. 2025-01-07T01:25:14.454Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  507. 2025-01-07T01:25:15.684Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  508. 2025-01-07T01:25:47.657Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  509. 2025-01-07T01:25:49.119Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  510. 2025-01-07T01:26:00.464Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 6ms, frames = 1798, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1798], [LED0: FPS = 142.86, send = 8571, processed = 8571, dropped = 0]
  511. 2025-01-07T01:26:28.229Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  512. 2025-01-07T01:26:33.231Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  513. 2025-01-07T01:26:34.836Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  514. 2025-01-07T01:26:38.971Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  515. 2025-01-07T01:27:00.466Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 6ms, frames = 1798, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1798], [LED0: FPS = 142.86, send = 8572, processed = 8572, dropped = 0]
  516. 2025-01-07T01:27:54.448Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  517. 2025-01-07T01:27:56.419Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  518. 2025-01-07T01:28:00.458Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 5ms, frames = 1798, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1798], [LED0: FPS = 142.85, send = 8571, processed = 8571, dropped = 0]
  519. 2025-01-07T01:28:12.437Z [IMAGETOLED_MNG0] Total index number is: 53160 (memory: 53160). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  520. 2025-01-07T01:28:17.539Z [IMAGETOLED_MNG0] Total index number is: 53202 (memory: 53202). User sparse processing is: disabled, image size: 960 x 540, area number: 104
  521. 2025-01-07T01:29:00.480Z [PERFORMANCE] [USB: FPS = 29.97, decoding = 8ms, frames = 1799, invalid = 0, mode = direct], [INSTANCE0: FPS = 29.97, processed = 1798], [LED0: FPS = 142.86, send = 8571, processed = 8571, dropped = 0]
  522.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!