Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 13.002684] ath10k_pci 0000:01:00.0: assign IRQ: got 66
- [ 13.002718] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x40.
- [ 13.003886] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
- [ 13.009756] ath10k_pci 0000:01:00.0: enabling bus mastering
- [ 13.010280] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 13.189414] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2
- [ 13.189456] ath10k_pci 0000:01:00.0: Falling back to user helper
- [ 13.318072] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
- [ 13.323062] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-5.bin failed with error -2
- [ 13.326011] ath10k_pci 0000:01:00.0: Falling back to user helper
- [ 13.353378] firmware ath10k!QCA99X0!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
- [ 13.353558] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-2.bin failed with error -2
- [ 13.361692] ath10k_pci 0000:01:00.0: Falling back to user helper
- [ 13.405527] firmware ath10k!QCA99X0!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
- [ 13.405862] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
- [ 13.413742] ath10k_pci 0000:01:00.0: Falling back to user helper
- [ 13.478610] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
- [ 14.322131] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
- [ 14.322175] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
- [ 14.333720] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9980-fW-012-17ba9833 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 0fb1435e
- [ 14.403535] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09f2
- [ 15.590459] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 15.590496] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
- [ 15.666326] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 15.667097] ath10k_pci 0000:01:00.0: wmi print 'free: 34244 iram: 32964 sram: 6508'
- [ 15.879388] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
- [ 16.012890] ath10k_pci 0001:01:00.0: assign IRQ: got 99
- [ 16.012935] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x40.
- [ 16.013973] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
- [ 16.019994] ath10k_pci 0001:01:00.0: enabling bus mastering
- [ 16.020667] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 16.196192] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0001:01:00.0.txt failed with error -2
- [ 16.196250] ath10k_pci 0001:01:00.0: Falling back to user helper
- [ 16.479345] firmware ath10k!fwcfg-pci-0001:01:00.0.txt: firmware_loading_store: map pages failed
- [ 16.484277] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-5.bin failed with error -2
- [ 16.487330] ath10k_pci 0001:01:00.0: Falling back to user helper
- [ 16.537377] firmware ath10k!QCA99X0!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
- [ 16.537618] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-2.bin failed with error -2
- [ 16.545715] ath10k_pci 0001:01:00.0: Falling back to user helper
- [ 16.603528] firmware ath10k!QCA99X0!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
- [ 16.603823] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
- [ 16.611904] ath10k_pci 0001:01:00.0: Falling back to user helper
- [ 16.646659] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
- [ 16.646893] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
- [ 16.654630] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
- [ 16.666391] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9980-fW-012-17ba9833 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 0fb1435e
- [ 16.736879] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09f2
- [ 17.927049] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 17.927082] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
- [ 18.004434] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 18.005243] ath10k_pci 0001:01:00.0: wmi print 'free: 34244 iram: 32964 sram: 6508'
- [ 18.275716] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
- [ 26.354488] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 26.354546] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
- [ 26.430304] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 26.431065] ath10k_pci 0000:01:00.0: wmi print 'free: 34244 iram: 32964 sram: 6508'
- [ 26.762979] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 27.353212] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
- [ 28.375772] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 28.375814] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
- [ 28.453105] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 28.453906] ath10k_pci 0001:01:00.0: wmi print 'free: 34244 iram: 32964 sram: 6508'
- [ 28.848819] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 32.240022] ath10k_pci 0000:01:00.0: failed to pull fw stats: -71
- [ 39.912938] ath10k_pci 0001:01:00.0: failed to pull fw stats: -71
- [ 40.975273] ath10k_pci 0001:01:00.0: failed to pull fw stats: -71
- [ 63.836298] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 2
- [ 63.929077] ath10k_pci 0001:01:00.0: No VIF found for vdev 1
- [ 63.929105] ath10k_pci 0001:01:00.0: no vif for vdev_id 1 found
- [ 63.965822] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 1
- [ 64.206157] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
- [ 64.206282] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
- [ 66.033611] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 66.033642] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
- [ 66.110954] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 66.111761] ath10k_pci 0001:01:00.0: wmi print 'free: 34244 iram: 32964 sram: 6508'
- [ 66.607726] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 116.636398] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
- [ 116.636500] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
- [ 118.591075] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 118.591112] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
- [ 118.668604] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 118.669399] ath10k_pci 0001:01:00.0: wmi print 'free: 34244 iram: 32964 sram: 6508'
- [ 119.123053] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 129.540939] ath10k_pci 0001:01:00.0: failed to pull fw stats: -71
- [ 1964.648411] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform
- [ 2875.464001] ath10k_pci 0001:01:00.0: refusing to associate station: too many connected already (32)
- [ 2877.820244] ath10k_pci 0001:01:00.0: refusing to associate station: too many connected already (32)
- [ 2880.580329] ath10k_pci 0001:01:00.0: refusing to associate station: too many connected already (32)
- [ 2883.850352] ath10k_pci 0001:01:00.0: refusing to associate station: too many connected already (32)
- [ 2893.291548] ath10k_pci 0001:01:00.0: refusing to associate station: too many connected already (32)
- [ 2905.661363] ath10k_pci 0001:01:00.0: refusing to associate station: too many connected already (32)
- [ 2926.021911] ath10k_pci 0001:01:00.0: refusing to associate station: too many connected already (32)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement