Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.2 2020-12-30 r5155 [i686-w64-mingw32-w10-2004] (sf-7.2-1)
- Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba 2.5" HDD MQ01ABD...
- Device Model: TOSHIBA MQ01ABD075
- Serial Number: *********
- LU WWN Device Id:
- Firmware Version: AX003J
- User Capacity: 750.156.374.016 bytes [750 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed May 05 18:12:59 2021 WEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 25) The self-test routine was aborted by
- the host.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 193) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1673
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 24367
- 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 640
- 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0032 044 044 000 Old_age Always - 22708
- 10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5656
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 61
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 77
- 193 Load_Cycle_Count 0x0032 092 092 000 Old_age Always - 87206
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 25 (Min/Max 12/55)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 5
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 60
- 222 Loaded_Hours 0x0032 060 060 000 Old_age Always - 16246
- 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
- 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 177
- 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
- SMART Error Log Version: 1
- ATA Error Count: 2623 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 2623 occurred at disk power-on lifetime: 22707 hours (946 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 02 80 96 0a 40 Error: UNC 2 sectors at LBA = 0x000a9680 = 693888
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 02 80 96 0a 40 00 00:51:29.067 READ DMA EXT
- 25 00 02 80 96 0a 40 00 00:51:28.997 READ DMA EXT
- 25 00 08 48 58 6a 40 00 00:51:28.997 READ DMA EXT
- 25 00 08 40 58 6a 40 00 00:51:28.996 READ DMA EXT
- 25 00 20 20 cc 0b 40 00 00:51:28.995 READ DMA EXT
- Error 2622 occurred at disk power-on lifetime: 22707 hours (946 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 02 80 96 0a 40 Error: UNC 2 sectors at LBA = 0x000a9680 = 693888
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 02 80 96 0a 40 00 00:51:28.997 READ DMA EXT
- 25 00 08 48 58 6a 40 00 00:51:28.997 READ DMA EXT
- 25 00 08 40 58 6a 40 00 00:51:28.996 READ DMA EXT
- 25 00 20 20 cc 0b 40 00 00:51:28.995 READ DMA EXT
- 25 00 28 58 7c 0a 40 00 00:51:28.988 READ DMA EXT
- Error 2621 occurred at disk power-on lifetime: 22706 hours (946 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 02 80 96 0a 40 Error: UNC 2 sectors at LBA = 0x000a9680 = 693888
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 02 80 96 0a 40 00 00:00:25.210 READ DMA EXT
- 25 00 02 80 96 0a 40 00 00:00:25.140 READ DMA EXT
- 25 00 08 48 58 6a 40 00 00:00:25.139 READ DMA EXT
- 25 00 08 40 58 6a 40 00 00:00:25.139 READ DMA EXT
- 25 00 20 20 cc 0b 40 00 00:00:25.137 READ DMA EXT
- Error 2620 occurred at disk power-on lifetime: 22706 hours (946 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 02 80 96 0a 40 Error: UNC 2 sectors at LBA = 0x000a9680 = 693888
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 02 80 96 0a 40 00 00:00:25.140 READ DMA EXT
- 25 00 08 48 58 6a 40 00 00:00:25.139 READ DMA EXT
- 25 00 08 40 58 6a 40 00 00:00:25.139 READ DMA EXT
- 25 00 20 20 cc 0b 40 00 00:00:25.137 READ DMA EXT
- 25 00 28 58 7c 0a 40 00 00:00:25.130 READ DMA EXT
- Error 2619 occurred at disk power-on lifetime: 22705 hours (946 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 02 80 96 0a 40 Error: UNC 2 sectors at LBA = 0x000a9680 = 693888
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 02 80 96 0a 40 00 00:00:04.808 READ DMA EXT
- e1 00 0f 00 00 00 00 00 00:00:04.807 IDLE IMMEDIATE
- ef 03 45 00 00 00 00 00 00:00:04.807 SET FEATURES [Set transfer mode]
- ef 02 00 00 00 00 00 00 00:00:04.807 SET FEATURES [Enable write cache]
- ef 90 06 00 00 00 00 00 00:00:04.806 SET FEATURES [Disable SATA feature]
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Aborted by host 90% 22607 -
- # 2 Short offline Completed without error 00% 22607 -
- # 3 Extended offline Aborted by host 90% 22603 -
- # 4 Short offline Completed without error 00% 22603 -
- # 5 Short offline Aborted by host 90% 22602 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement