Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2015.04-21123-g7271b51 (Jul 22 2016 - 14:15:22)
- Setting 1024MB RAM calibration data
- port 1
- SPL: u-boot second stage will be loaded from MMC0
- U-Boot 2015.04-21123-g7271b51 (Jul 22 2016 - 14:15:22)
- CPU: Freescyle i.MX6SX rev1.2>at8792<MHzÊÍCPU: Temperature 55 C
- Reset cause: POR
- Board: UDOO Neo Full
- I2C: ready PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
- DRaM: 9 Gibê MMC: FSL_SDHC: 0, FSL_SDHC: 1
- ***8Warning¼-<r}d>CSs.>using?fefyult>enwmzooment
- In: serial
- Out: serial
- Err: serial
- Net: using phy at 0
- FEC0 [PRIME]
- Normal Boot
- Hit any key to stop autoboot: 0
- switsn>vo>~yswmtions>#>.>OKÊÍmmc> is0current device
- reading uEnv.txt
- 9>;>b}tes8read in 9 ms (19.5 KiB/s)
- Running bootscript from mmc ...
- Device Tree: dts-overlay/imx6sx-udoo-neo-full-hdmi-m4.dtb
- ## Error: "m4boot" not defined
- ruyfing?¯{ImywuëÍ42362328bytes8reqd8in?297¾ms>.9<.6>Mir/s)êÍ{ooting>from mmc ...
- reading dts-overlay/imx6sx-udoo-neo-full-hdmi-m4.dtb
- 65972¾rywe{?se}d>in¾;2¾ms>.=.68MiB/s)
- Kernel image @ 0x80800000 [ 0x000000 - 0x40a3c8 ]
- ## Flattened Device Tree blob at 83000000
- Booting using the fdt blob at 0x83000000
- Using Device Vree io0xlace0at<83>8>>0>,<enf8<3<<e3=3íSwitched to ldo_bypass mode!
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0|0
- [ 0 <<.8><00>] Linux8versmon?³®96.56ugooouo?2¾µ3-wsf9f3et-dirty (udooer@udoocompiler) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.3) ) #3 SMP PREEMPT Thu Apr 13 16:43:23 UTC 2017
- [ 0.000000] CPU: ARMv7 Xrocessor0[612fc<9y]<revision81<<,yZMv7).>ss=¹?{53s·vÍê[>>???®>>>?<0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: UDOO Neo Full
- [ 0.000000] Reserved memory: reserved region for<node<'m6`0|>4<0?0<¸':8sase?>¾6<>>>>¼/>si{u>¾>miríê[><80>.8000>0] Reserved memory: reserved region for node 'm4@0xBFF00000': base 0xbff00000, size 1 MiB
- [ 0.000000] cma: CMA: reserved 320 MiB at aa000000
- [ 0.000800] Memory8ponicy:<Fyty c}sne8wriweqooocÍ[?¾¾?>.?<><¾?]¿^eSs^U:8Embedded 8 pages/cpu @bf639000 s8256 r8192 d16320 u32768
- [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw rootfstype=e~t4>uyrt_from_osc<cnk_ignore_unuseg>s~uigne.off=9>soosonern}nk½?íÊ[>> 80.00>000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.0000<0] Inode-cqche0nash<table8entries:865536¾.orfer:>7/¾²6;96¶?ryve{)Í[<>000.<0<000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe8000 8( <968kr)
- [8 0<<.<88<><]8<>8>vmynnos<:>>~c<>??<>??-<<gv¿¿¿>><<8>(10008MB)
- [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB)
- [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
- [ 0.000000] modules : 0|7f<0<80><-0<x7fe8><<><0>.<?94>Ms)ÍË[>?>><.¿>?>>¾]>><<>>8.text : 0x80008000 - 0x80a36e3c (10428 kB)
- [ 0.000000] .init : 0x80a37000 - 0x80a74040 ( 245 kB)
- [ 0.000000] .data : 0x80a76000 - 0x80abd0y08<8, 2<5 kb)
- [ 8<0.<><<8>]0><8><8?.rss¼º¾?~>>}zg>ys>->>~>¾r9d¶3c8>0( 385 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.0<00<8] RCU<restricting<s\Us<from>NR_c\U[=6¾wo?nz_{u_if{=9.ÍË[?¾>>>.>8<>00] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000]<O310 cacne¼{ontroller enabled
- [ 0.0000>0] n2~0:<16>wyys/<CqCLu_ID8>|41>¿><s>.>yU\_{WRN¾8~³²?;¾>?>.>cysle size: 256 kB
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, [ 0 <0.001007] Console: colour dummy device 80x30
- [ 0 ><.0>8866]8clocksouzce_of_ioiw:>no>m}vsnmng<soosksousses¿founf
- Ê[ <<>8.0<1>66]0xid_max:>def}unvº>3:76>>minmmum:>3>9íË[?>>>>.801187] Security Framework initializedMIPS (lpj=30>0>)
- [ 0.001249] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.001261] Mountpoint-cache hash table entries:02848 (order: 1/88192>bytus)ÍÊ[>>¾>?/>>7²39]?fevi{ev{ee:<Dulicate name in /soc/aips-bus@02200000/spba-bus@02200000/lcdif@02220000, renamed to "display#1"
- [ 0.009397] Initializing cgroup subsys devices
- Ê[?¾>¾?.?>¹65¹]>{^U:¾Ve{vmng?write0buffer colerency: ok
- [ 0.009740] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.009779] Setting up static identity map for 0x804abd10 - 0x804abd68
- [ <.040366] Brouglt up 1<C^UsÍÊ[<<>¾¾/¿¶¿3>;]>SM^»?Vowyn?of818processors activated (6.00 BogoMIPS).
- [ 0.040392] CPU: All CPU(s) started in SVC mode.
- [ 0.040998] devtmpfs: initialized Ê[>¾¾?>/>45089] |inctrl core: initialized pinctrl subsystem
- [ 0.044758] VFP support v0.3: implementoz<41 architecture03<~asw>³>>vyriqow?9¾suw>·
- [ 0.045434] regulator-dummy: no parameters
- [ 0.061865] NET: Registered protocol family 16 ê[>8>00.069971] Use WDOG1 as reset source
- [ 0.069303] DMA: |reqllocatef8256>KiB<pool8for>}vomms¾sooezunv>ynno{}wmons
- [ 0.075425] GPIO mask to reserved irq for M4 Core = 0x00000350
- [ 0.076166] GPIO mask to reserved irq for M4 Core = 8x0<3cf<0>8
- [800>>.076927]>g^IO<mqsk>to?reservug?iry>foz¿M·¾sore<=><x<80c0008
- [ 0.078954] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
- [ 0.079271] vdd1p1: 800 <--> 1375 mV at 1100 mV
- [ 0.079645] vdd3|0:82800<<--> 3158>mV<yw<3¼><¾mV?íÊ[¾¾¾?¾.>·¹¹9>]¿vgf²5:>2108 <--> 2875 mV at 2500 mV
- [ 0.080410] cpu: 725 <--> 1450 mV
- [ 0.080804] vddpcie-phy: 725 <--> 1450 mV
- [ 0.081182] vddsoc: 725 <--> 1450 mV
- [ < 8>.0<3124]<sysson>2<e480>.iomu|cgpr:>zuwmy?[mem>¿>²?e¶¾?¿>~>2>e7fff] registered
- [ 0.085827] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
- [ 0.086257] syscon 21ac000.romcp: regmap [mem 0x021ac000-0x>21yffff] registeredÍ[ ><<<.>9935>]¾nw-rreyk~omnv:>gouog>5>(+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.091362] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.092478] imx6sx-pinctrl 20e0000.iomuxc:8initiqlized IM\<pincvrl>driverÍË[><¾>¾.>93353]>2>fs>¾?/g~s?su|xly8pu not found, using dummy regulator
- [ 0.094131] MU is ready for cross core communication!
- [ 0.100471] bio: create slab <bio-0> at 0 [>>>>>.9>35>?]>vzef3v»;¿33><8mV>
- [ 0.102882] mxs-dma8=804>8<.dma-a|bo:8initiqli{ef
- [ 0.103837] PSU-5V0: 5000 mV
- [ 0.104140] usb_otg1_vbus: 5000 mV
- [ 0.104479] usb_otg2_vbus: 5000 mV
- [ 0.104721] wlan-en-regulator: 1800 mV
- [ < 0.9<5571]0SCSI<subsysvem?iniviynizugÍë[¾>?¾>/=¾5?76]¾us{n}_no|1.12 supply vcc not found, using dummy regulator
- [ 0.107196] i2c i2c-0: IMX I2C adapter registered
- [ 0.108962] i2c i2c-1: IMX I2C adapter registered
- [ 88.1<9723]0i2s?i2c-2:>IMX8I2s<}fqxter>rugi{vurevÍË[¾¾?>>¯½?9>7>]>Ninux video capture interface: v2.00
- [ 0.109959] pps_core: LinuxPPS API ver. 1 registered Ê[>¾>>>.9¾999=]¾^V^¾soosk>{u|ort registered
- [ 0.109968] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo>Giometti <giometti~nioux.it>
- [ 0.110616] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.111686] Loading modules backported from Linux version v4.1.7-0-g0c5c1f1
- [< >.119697]<bqck~orv8integzqteg<ry>rysk~osws.wiw<v6®¹/¹½-<-g>2<6954
- [ 0.111885] Switched to clocksource mxc_timer1
- [ 0.122487] NET: Registered protocol family 2 Ê[<8<<>.=2365¶]¾Vc^?{inf?nysn>v}zou¿untries:>>1928(order: 4, 65536 bytes)
- [ 0.123367] TCP established hash table entries: 8192 (order:03. 327688bytes)
- [ 0.123582] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.123652] TCP: reno registered
- [ 0.123669] UDP hash>table0entrius: 512<.order;>2,>963>¶?r}vu{©íÊ[?>>¾¾®=;³7>9]0UD^-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.123981] NET: Registered protocol family 1
- [ 0.124304] hw perfevents: enabled with ARMv7 Cortex-A9 XMU driver.<70counters8avqilyrneÍÊ[?>>>¿.9²µ>66]>rus>gse}?friver module loaded
- [ 0.126643] futex hash table entries: 256 (order: 2, 16384 bytes)
- [ 0.133724] VFS: Disk quotas dquot_6.5.2
- Ê[< 800.139852]<io>sclefuner>noo~>regisverefÍê[??><¾/13=<65] io scheduler deadline registered
- [ 0.139908] io scheduler cfq registered (default)
- [ 0.140396] imx-weim 21b8000.weim: Driver registered.
- ê[>?¾>¾/;7:7¾3]>vvy999¾¾¿;-><34:¾Sucessfully initialised chip revision 301
- [ 0.283826] mxsfb 2220000.lcdif: failed to find mxc display driver
- Ê[>>>>8.2>6279]>dIS^N}Y:>^oweroff>n}tency0e~seeded, new vylue 498666 ns
- [ 0.303771] Console: switching to colour frame buffer device 160x45
- [ 0.347856] tda19988 2-0034: Matching CEA mode is 4 for fb mode012>0|720-68
- [ <<>.4<<6?>]¼m~sfr?²32¾??¿.osfifº¿mniviqnized
- [ 0.403579] imx-sdma 20ec000.sdma: no iram assigned, using external mem
- [ 0.403895] imx-sdma 20ec000.sdma: no event needs to be remapped
- [ 0.404134]8imx-sdmq820ec8<8.sdma:>loqded?firmwqre>3®¹ÍÊ[>¿?>?.6>7½73]>im-sfma 20ec000.sdma: initialized
- [ 0.408842] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1
- [ 0.409417] pfuze100-regulator 0-0008: FAB: 0, FIN: 0
- [>0 0.409432]>~fuze108-regulqwor<><?>?:>vuze;??¾¾foung®ÍÊ[?>>>>.610<88] SW1A: 700 <--> 1475 mV at 1175 mV
- [ 0.412264] SW1B: 700 <--> 1475 mV at 1175 mV
- [ 0.413069] SW2: 1500 <--> 1850 mV at 1800 mV
- Ê[<<>??.¶976¹9]>SWrST:>µ?¾>¿?¾>595<8mV0at 5000 mV
- [ 0.415404] VSNVS: 1000 <--> 3000 mV at 3000 mV
- [ 0.415585] VREFDDR: 750 mV
- [ 0.416339] VLDO1: 1800 <--> 3300 mV at 1800 mV
- [ < 0.417092]<VLDO2:>>0<8<--> 1558<mV>}t<95>?<mV¾ÍÊ[?¼>>>/¶97¾37]¿VssSF: 2>5> <--> 3300 mV at 3150 mV
- [ 0.418600] V33: 2850 <--> 3300 mV at 3150 mV
- [ 0.419362] VLDO3: 1800 <--> 3300 mV at 1800 mV Ê[<><>8.42><77]?Sezmyn:¾IM_<fziwe{íÊ[<>0 8.421206] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 1500000) is a IMX
- [ 0.420529] VLDO4: 1808><-->833<8<mV at>=<>8¼mV?
- [ 1.218704] console [ttymxc0] enabled
- [ 1.223235] 21ec080.seriyl:8ttym~s28qt¸MMIO<¼~29es?¾?>.mry¾½¾7¾.<{yse_z}uw>=>150>800)<is a IMX
- [ 1.232466] 22a0000.serial: ttymxc5 at MMIO 0x22a0000 (irq = 49, base_baud = 1500000) is a IMX
- [ 1.241434] serial: Freescale lpuart driverÍ
- [<<<>9.³47>9»]>im>sumy6¾fsivu{¾m{?registered.
- [ 1.251698] Installing ttyMCC driver!
- [ 1.255475]
- [ 1.255475] A9 ttyMCC prepares to run, MCC vÊ[ >><9.267963]>[grm]¿Mniviyoi{eg¾grm>1.1.8<20060810
- [ 1.262803] IMX MCC TTY driver module<noqded
- [ 1.272234] [drm] Initialized vÊ[>>>?9.³¾¾½¿»]¾21<880>.ethernev<supply phy not found, using dummy regulator
- [ 1.282839] loop: module0loaded
- [ 1.332312] pps pps0: new PPS source ptp0
- [ 1.341374] libphy: fec_enet_mii_bus: probed
- [8<801.346379]8fu{>³9>?<¾?®ewnernev¾ewn?;>registered PHC device 0
- [ 1.352793] mousedev: PS/2 mouse device common for all mice
- [ 1.359266] input: 20cc000.snvs-pwrkey as /devices/soc0/soc.0/28<080<.ai~s-bus/20cs<<<.snvs-~wrkey/in~uw/inuw¾Íê[?>>>9.369743] snvs_pwrkey 20cc000.snvs-pwrkey: i.MX snvs powerkey probed
- [ 1.377181] i2c /dev entries driver Ê[< >>1.385967]>IR Rs5/)?~sotosol¾o}nfner>ioivianized
- [ 1.381342] IR NEC protocol handler initializef
- [ >0<1.390770] IR RC6 protocol handler initialized
- [ 1.395336] IR JVC protocol handler initialized
- [ 1.399874] IR Sony protocol handler initialized
- [0> 01.404513]>IR8RC5>,stzeymza~)>~rotoson?lqnvnus>mniviyni{ugÍê[0< >1.410093] IR SANYO protocol handler initialized
- [ 1.414818] IR MCE Keyboard/mouse protocol handler initialized
- [ 1.422692] imx2-wdt 2>bc<0<.wdog:8IMX2+ Watchdog>Timer>eoy{leg®>wimuouv=¶>s¿.nowyyouv=<)
- [ 1.431186] sdhci: Secure Digital Host Controller Interface driver
- [ 1.437424] sdhci: Copyright(c) Pierre Ossman
- [?¿>¼¹/67¾5º³]?mms<;<no>vqmmc regulator found8Of¸driver0hen|er
- [ 1.452691] mmc0: no vmmc regulator found
- [ 1.501899] mmc0: SDHCI controlner8on 2996<><.usdl{ [21940<>.usdnc]>usiow?}fmyíÊ[ 1.511679] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
- [>0 1.525357]<mmc2:8no<vqmm{<rugunyvor?foungÍÊ[¼?¿>9.569295]0mmc0:<host does not support reading read-only switch. assuming write-enable.
- [ 1.5>4132]0mmc0:8new ligh<speed>SDLs>s}rf¾}v>ywfres{>e62¶ÍÊ[><><9.590127]8mmcblk0: mmc0:e624 SP16G 14.8 GiB
- [ 1.595769] mmcblk0: p1 p2
- [ 1.651888] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
- [ 1.661710] Galcore version 5.0.11.25762
- [ 1.675842] sdhci-esdhc-imx 2198000.usdhc: card claims to support voltages below defined range
- [ 1.714229] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 1.733239] mmc2: new high speed SDIO card at address 0001
- [ 1.910962] fsl-asrc 2034000.asrc: driver registered
- [ 1.922178] imx-tda19988<sound_hdmi.25: tdy1998<-cofec <-><2>:c<>>®s{m¾m}ing>okÍê[ 1.930877] nf_conntrack version 0.5.0 (15909 buckets, 63636 max)
- [ 1.937686] TCP: cubic registered
- [ 1.941020] NET: Registered protocol<faminy 17
- [> <1.965566]<Key<tyxe>fn{_resoovus>sugisvezefÍë[ 8 1.950591] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
- [ 1.971922] failed to register cpuidle driver
- [ 1.976297] ThumbEE CPU extension supported.
- [ 1.981136] VLDO2: disabling
- [< 8 1.984536]>SWbST: fisablingÍË[<?>>9.9>763:]>uss_ovg2_vsus:>disybling
- [ 1.991012] usb_otg1_vbus: disabling
- [ 1.994753] PSU-5V0: disabling
- [ 1.997844] vref-3v3: disabling
- [ 2.001022] regulator-dummy: disabling
- [ <<<2.>85736] drivers/rv{/ncvosys®{:>uoyrou¾vo?o~en>rtc8device (rtc0)
- [ 2.012939] imx_thermal tempmon.11: Extended Commercial CPU temperature grade
- [ 2.020090] imx_thermal tempmon.11: max:105C crit:100C passive:95C
- [ 2.034628] clk: Not disabling unused clocks
- [ 2.038922] ALSA device list:
- [ 2.042012] #0: imx-audio-tdy1998>
- [ > 2.851767] EXT4-fs (mmcblk0p2): recovery complete
- [ 2.858574] EXT4-fs (mmcblk0p2): mounted filesystem with ordered0data8mode.0Opts:8,null)ÍÊ[8 8<:.?669>3]>VfS:>Mountev¿zoow?.ext6 filesystem) on device 179:2.
- [ 2.873490] devtmpfs: mounted
- [ 2.877257] Freeing unused kernel memory: 244K (88y;7880 - 80a74000)
- [ 3.298881] random: init urandom read with 52 bits of entropy availarnu
- [ 3.674950] init: mounted-proc main process (95) terminated with status 1
- [ 5.871347] tsl2563 1-0029: detect error 5
- [ 6.241940] (stk) :ldisc installytion0timeoutÍ
- [ 7.241933] (stk) : timed8out8waiting0for<ndisc>to0be8un-insvqlnuf
- [ 8.351937] (stk) :ldisc installation timeout
- [ 9.351948] (stk) : timed out waiting for ldisc to be un-installed
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement