API tools faq
paste
Guest User

amlogic s905d3 uboot uart output

a guest
Jun 4th, 2020
87
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 88.95 KB | None | 0 0
raw download clone embed print report
  1. [ 8.397815@3] usb 1-1.2: new full-speed USB device number 4 using xhci-hcd
  2. [ 8.429755@2] mali ffe40000.bifrost: Continuing without Mali regulator control
  3. [ 8.432755@2] mali ffe40000.bifrost: max pp is 2
  4. [ 8.437282@2] mali ffe40000.bifrost: set min pp to default 1
  5. [ 8.442888@2] mali ffe40000.bifrost: min pp is 1
  6. [ 8.447497@2] mali ffe40000.bifrost: set min clk default to 0
  7. [ 8.453210@2] mali ffe40000.bifrost: min clk is 0
  8. [ 8.457992@2] mali ffe40000.bifrost: hiu io source 0xf1663000
  9. [ 8.463795@2] mali ffe40000.bifrost: hiu io source 0xf1665000
  10. [ 8.469608@2] mali ffe40000.bifrost: num of pp used most of time 1
  11. [ 8.475744@2] mali ffe40000.bifrost: clock dvfs cfg table size is 6
  12. [ 8.482001@2] mali ffe40000.bifrost: max clk set 4
  13. [ 8.486750@2] mali ffe40000.bifrost: max clk is 4
  14. [ 8.491524@2] mali ffe40000.bifrost: turbo clk set to 5
  15. [ 8.496719@2] mali ffe40000.bifrost: turbo clk is 5
  16. [ 8.501671@2] mali ffe40000.bifrost: default clk set to 4
  17. [ 8.507023@2] mali ffe40000.bifrost: default clk is 4
  18. [ 8.512150@2] mali ffe40000.bifrost: ====================0====================
  19. [ 8.512150@2] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
  20. [ 8.534181@2] mali ffe40000.bifrost: ====================1====================
  21. [ 8.534181@2] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
  22. [ 8.548071@2] mali ffe40000.bifrost: ====================2====================
  23. [ 8.548071@2] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
  24. [ 8.566026@2] mali ffe40000.bifrost: ====================3====================
  25. [ 8.566026@2] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
  26. [ 8.582086@3] pl2303 1-1.2:1.0: pl2303 converter detected
  27. [ 8.583345@3] usb 1-1.2: pl2303 converter now attached to ttyUSB1
  28. [ 8.602357@2] mali ffe40000.bifrost: ====================4====================
  29. [ 8.602357@2] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
  30. [ 8.614923@2] mali ffe40000.bifrost: ====================5====================
  31. [ 8.614923@2] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
  32. [ 8.633014@2] mali ffe40000.bifrost: clock dvfs table size is 6
  33. [ 8.639083@2] mali_plat=bf05e2d8
  34. [ 8.642564@2] find tzd id: 0
  35. [ 8.644974@2] gpu cooling register okay with err=0
  36. [ 8.650244@2] find tzd id: 0
  37. [ 8.652568@2] gpu core cooling register okay with err=0
  38. [ 8.657831@2] shader_present=1, tiler_present=1, l2_present=1
  39. [ 8.663602@2] Mali_pwr_on:gpu_irq : 200
  40. [ 8.667670@2] hrtimer: interrupt took 18458 ns
  41. [ 8.672150@2] mali ffe40000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0
  42. [ 8.682499@2] mali ffe40000.bifrost: Probed as mali0
  43. [ 8.687222@1] PPMGRVPP: info: RegisterTB_Function: gfunc (null), func: bf08f000, ver:TB detect: v2016.11.15a *** [ Tue Mar 19 19:21:39 CST 2019]-[ renjiang.han]-[* master]-[67f03d41e0612a58d1edd96db9bc8b92de1a59b1]-[Date: Wed Jul 4 00:44:57 2018 +0800]-[2]
  44. [ 8.721838@3] usb 1-1.3: new low-speed USB device number 5 using xhci-hcd
  45. [ 8.832228@0] ueventd: Coldboot took 0.463 seconds
  46. [ 8.848259@2] audit: type=1400 audit(1591276333.980:3): avc: denied { write } for pid=1 comm="init" name="alignment" dev="proc" ino=4026531966 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
  47. [ 8.862132@2] audit: type=1400 audit(1591276333.996:4): avc: denied { open } for pid=1 comm="init" path="/proc/cpu/alignment" dev="proc" ino=4026531966 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
  48. [ 8.882783@3] input: CHICONY HP Basic USB Keyboard as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:03F0:0024.0001/input/input6
  49. [ 8.912514@0] audit: type=1400 audit(1591276334.044:5): avc: denied { write } for pid=2557 comm="init" name="watermark_scale_factor" dev="proc" ino=372 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_vm_writable:s0 tclass=file permissive=1
  50. [ 8.950304@1] EXT4-fs (mmcblk0p20): Ignoring removed nomblk_io_submit option
  51. [ 8.954753@3] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-xhci-hcd.0.auto-1.3/input0
  52. [ 9.015185@2] EXT4-fs (mmcblk0p20): recovery complete
  53. [ 9.016803@2] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  54. [ 9.509703@0] audit: type=1400 audit(1591276334.640:6): avc: denied { read } for pid=3143 comm="imageserver" name="vndbinder" dev="tmpfs" ino=14559 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  55. [ 9.526114@0] audit: type=1400 audit(1591276334.660:7): avc: denied { write } for pid=3143 comm="imageserver" name="vndbinder" dev="tmpfs" ino=14559 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  56. [ 9.547973@0] audit: type=1400 audit(1591276334.684:8): avc: denied { open } for pid=3143 comm="imageserver" path="/dev/vndbinder" dev="tmpfs" ino=14559 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  57. [ 9.570381@0] audit: type=1400 audit(1591276334.704:9): avc: denied { ioctl } for pid=3143 comm="imageserver" path="/dev/vndbinder" dev="tmpfs" ino=14559 ioctlcmd=0x6209 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  58. [ 9.599834@2] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
  59. [ 9.599834@2]
  60. [ 9.600585@2] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  61. [ 9.600585@2]
  62. [ 9.608234@2] e2fsck: Pass 2: Checking directory structure
  63. [ 9.608234@2]
  64. [ 9.615316@2] e2fsck: Pass 3: Checking directory connectivity
  65. [ 9.615316@2]
  66. [ 9.622718@2] e2fsck: Pass 4: Checking reference counts
  67. [ 9.622718@2]
  68. [ 9.629515@2] e2fsck: Pass 5: Checking group summary information
  69. [ 9.629515@2]
  70. [ 9.637149@2] e2fsck: /dev/block/data: 1319/1643376 files (4.9% non-contiguous), 156543/6563328 blocks
  71. [ 9.637149@2]
  72. [ 9.649463@2] EXT4-fs (mmcblk0p20): Ignoring removed nomblk_io_submit option
  73. [ 9.659695@2] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  74. [ 9.667927@2] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
  75. [ 9.676937@2] EXT4-fs (mmcblk0p3): recovery complete
  76. [ 9.678457@2] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  77. [ 9.770180@0] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
  78. [ 9.770180@0]
  79. [ 9.770935@0] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  80. [ 9.770935@0]
  81. [ 9.778572@0] e2fsck: Pass 2: Checking directory structure
  82. [ 9.778572@0]
  83. [ 9.787051@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
  84. [ 9.794588@2] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  85. [ 9.805309@2] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
  86. [ 9.814077@2] EXT4-fs (mmcblk0p13): recovery complete
  87. [ 9.816006@2] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  88. [ 9.880626@0] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
  89. [ 9.887554@0] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  90. [ 9.938562@2] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
  91. [ 9.941620@2] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  92. [ 9.992883@0] EXT4-fs (mmcblk0p15): Ignoring removed nomblk_io_submit option
  93. [ 9.999732@0] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  94. [ 10.006273@0] init: 27 output lines suppressed due to ratelimiting
  95. [ 10.021302@2] register clk_set_setting cpu[43]
  96. [ 10.027778@2] Registered firmware driver success.
  97. [ 10.029203@2] Try to load video/h264_enc.bin ...
  98. [ 10.032910@2] load firmware size : 76288, Name : video/h264_enc.bin.
  99. [ 10.037945@2] the fw pack ver v0.0 is too lower.
  100. [ 10.042468@2] it may work abnormally so need to be update in time.
  101. [ 10.049220@2] Try to load video/video_ucode.bin ...
  102. [ 10.067456@1] load firmware size : 1706240, Name : video/video_ucode.bin.
  103. [ 10.068786@1] the fw pack ver v0.2 is too lower.
  104. [ 10.073215@1] it may work abnormally so need to be update in time.
  105. [ 10.120383@3] Amlogic A/V streaming port init
  106. [ 10.122898@3] get gate demux control ok ecb2edc0
  107. [ 10.123716@3] get gate parser_top control ok ecb2e940
  108. [ 10.128853@3] get gate vdec control ok ecb2e100
  109. [ 10.133367@3] get gate clk_81 control ok ecb2e000
  110. [ 10.138038@3] get gate clk_vdec_mux control ok ecb2ee00
  111. [ 10.143225@3] get gate clk_hcodec_mux control ok ecb2e640
  112. [ 10.148549@3] get gate clk_hevc_mux control ok ecb2e340
  113. [ 10.153838@3] get gate clk_hevcb_mux control ok ecb2ec00
  114. [ 10.159034@3] get gate ahbarb0 control ok ecb64c80
  115. [ 10.163766@3] get gate asyncfifo control failed (null)
  116. [ 10.189689@1] ammvdec_h264 module init
  117. [ 10.218757@3] ammvdec_mpeg12 module init
  118. [ 10.228201@2] ammvdec_mpeg4_driver_init_module
  119. [ 10.259541@2] amvenc_avc_probe -- reserved memory config fail.
  120. [ 10.259738@2] amvenc_avc - cma memory pool size: 60 MB
  121. [ 10.264924@2] encode_wq_init.
  122. [ 10.267811@2] encode start monitor.
  123. [ 10.271361@1] encode workqueue monitor start.
  124. [ 10.279711@3] vpu_init
  125. [ 10.279967@3] vpu_probe
  126. [ 10.280362@3] HevcEnc reserved memory config fail.
  127. [ 10.285276@3] HevcEnc - cma memory pool size: 64 MB
  128. [ 10.290022@3] HevcEnc - wave420l_irq: 68
  129. [ 10.293985@3] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xf272c000
  130. [ 10.304150@3] success to probe vpu device with video memory from cma
  131. [ 10.333222@2] audit: type=1400 audit(1591276335.464:10): avc: denied { setattr } for pid=1 comm="init" name="slabinfo" dev="proc" ino=4026532013 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
  132. [ 10.371645@3] logd.auditd: start
  133. [ 10.529049@0] type=1400 audit(1591276335.660:11): avc: denied { setattr } for pid=2557 comm="init" name="droidota" dev="mmcblk0p20" ino=130821 scontext=u:r:vendor_init:s0 tcontext=u:object_r:update_data_file:s0 tclass=dir permissive=1
  134. [ 10.547932@1] type=1400 audit(1591276335.660:11): avc: denied { setattr } for pid=2557 comm="init" name="droidota" dev="mmcblk0p20" ino=130821 scontext=u:r:vendor_init:s0 tcontext=u:object_r:update_data_file:s0 tclass=dir permissive=1
  135. [ 10.565062@1] type=1400 audit(1591276335.660:12): avc: denied { setattr } for pid=2557 comm="init" name="log" dev="mmcblk0p20" ino=261638 scontext=u:r:vendor_init:s0 tcontext=u:object_r:log_file:s0 tclass=dir permissive=1
  136. [ 10.584694@1] type=1400 audit(1591276335.660:12): avc: denied { setattr } for pid=2557 comm="init" name="log" dev="mmcblk0p20" ino=261638 scontext=u:r:vendor_init:s0 tcontext=u:object_r:log_file:s0 tclass=dir permissive=1
  137. [ 10.604140@1] type=1400 audit(1591276335.680:13): avc: denied { setattr } for pid=2557 comm="init" name="media" dev="mmcblk0p20" ino=654084 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
  138. [ 10.660594@2] nn is disable,should not do probe continue
  139. [ 10.705615@1] type=1400 audit(1591276335.680:13): avc: denied { setattr } for pid=2557 comm="init" name="media" dev="mmcblk0p20" ino=654084 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
  140. [ 10.715705@0] logd.daemon: reinit
  141. [ 10.724033@1] type=1400 audit(1591276335.836:14): avc: denied { setattr } for pid=1 comm="init" name="export" dev="sysfs" ino=4152 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  142. [ 11.100488@1] healthd: BatteryTemperaturePath not found
  143. [ 11.100529@1] healthd: BatteryCycleCountPath not found
  144. [ 11.205551@1] android.hardware.health@2.0-impl: wakealarm_init: timerfd_create failed
  145. [ 11.209926@1] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
  146. [ 11.215775@0] fb: osd_open, 1497, fb_index=0,fb_rmem_size=26738688
  147. [ 11.215906@0] fb: osd_open, 1497, fb_index=1,fb_rmem_size=1048576
  148. [ 11.215976@0] fb: osd_open, 1497, fb_index=2,fb_rmem_size=1048576
  149. [ 11.216008@0] fb: osd_open, 1497, fb_index=3,fb_rmem_size=8388608
  150. [ 11.242388@2] unifykey: amlkey_init_gen() enter!
  151. [ 11.256910@1] vout: vout_io_open
  152. [ 11.261883@2] emmc_key_read:114, read ok
  153. [ 11.261896@2] unifykey: amlkey_init_gen() storagekey_info.buffer=c5080000, storagekey_info.size = 40000!
  154. [ 11.278657@3] vfm_map_store:rm default
  155. [ 11.278887@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  156. [ 11.319327@3] file system registered
  157. [ 11.336171@2] assign_ffs_buffer FFS_BUFFER_MAX=100!!!
  158. [ 11.336959@2] type=1400 audit(1591276335.836:14): avc: denied { setattr } for pid=1 comm="init" name="export" dev="sysfs" ino=4152 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  159. [ 11.443917@3] [DI] load 0xc00 pq table len 283 later.
  160. console:/ $ [ 11.483685@3] read descriptors
  161. [ 11.486164@3] read strings
  162. [ 11.653883@1] audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64
  163. [ 11.897874@0] vout: vout2_io_open
  164. [ 11.897910@0] vout: vout2_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  165. [ 11.901322@0] vout: vout2_io_release
  166. [ 11.905351@0] vout: vout2_io_open
  167. [ 11.907411@2] cectx ff80023c.aocec: init_cec_port_info phy_addr:1000, port num:1
  168. [ 11.907415@2] cectx ff80023c.aocec: port_seq=0x0
  169. [ 11.907419@2] cectx ff80023c.aocec: portinfo id:0 arc:0 phy:1100,type:0
  170. [ 11.926667@0] vout: vout2_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  171. [ 11.932303@0] vout: vout2_io_release
  172. [ 11.937747@0] vout: vout_io_open
  173. [ 11.939040@0] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  174. [ 11.944600@0] vout: vout_io_release
  175. [ 11.950605@2] vout: vout2: vmode set to null
  176. [ 11.952392@2] fb: current vmode=panel, cmd: 0x10000
  177. [ 11.957139@2] lcd: set mute
  178. [ 12.185816@2] bl: backlight power off
  179. [ 12.185852@2] lcd: lcd_power_ctrl: 0
  180. [ 12.187409@2] lcd: disable driver
  181. [ 12.190757@2] lcd: dsi init off
  182. [ 12.217838@0] vout: aml_tvout_mode_work: monitor_timeout
  183. [ 12.253265@3] avc open
  184. [ 12.253291@3] amvenc_avc check CMA pool success, max instance: 3.
  185. [ 12.293919@2] lcd: clk gate is already off
  186. [ 12.293958@2] lcd: lcd_vout_disable finished
  187. [ 12.296635@2] vout: vout2: new mode null set ok
  188. [ 12.301164@2] fb: current vmode=null, cmd: 0x20000
  189. [ 12.305924@2] vout: vout2: disable vpu_clkc
  190. [ 12.310849@2] vout: vmode set to null
  191. [ 12.310860@0] vout: vout2_io_open
  192. [ 12.310866@0] vout: vout2_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  193. [ 12.310873@0] vout: vout2_io_release
  194. [ 12.312753@0] allocating phys 0x64c00000, size 20480k, wq:ea541600.
  195. [ 12.312757@0] amvenc_avc memory config success, buff start:0x64c00000, size is 0x1400000, wq:ea541600.
  196. [ 12.312875@0] avc release, wq:ea541600
  197. [ 12.312878@0] remove encode_work_queue ea541600 success, _destroy_encode_work_queue line 3513.
  198. [ 12.313169@0] [+] vpu_open
  199. [ 12.357029@2] fb: current vmode=1080p60hz, cmd: 0x10000
  200. [ 12.362143@2] vout: new mode null set ok
  201. [ 12.365999@2] fb: current vmode=null, cmd: 0x20000
  202. [ 12.371375@2] vout: vout2: vmode set to panel
  203. [ 12.373418@3] allocating phys 0x64c00000, virt addr 0x0, size 65536k
  204. [ 12.373657@3] [-] vpu_open, ret: 0
  205. [ 12.373678@3] vpu_release
  206. [ 12.373680@3] vpu_free_buffers
  207. [ 12.373681@3] vpu_free_instances
  208. [ 12.373683@3] vpu_release, s_video_memory 0x64c00000
  209. [ 12.398741@2] fb: current vmode=null, cmd: 0x10000
  210. [ 12.403366@2] vout: vout2: enable vpu_clkc
  211. [ 12.407456@2] lcd: tablet driver init(ver 20181012): mipi
  212. [ 12.413060@2] lcd: lcd_pll_wait_lock_g12a: path=1, pll_lock=1, wait_loop=1
  213. [ 12.429718@2] lcd: lcd_power_ctrl: 1
  214. [ 12.435997@3] vout: vout_io_open
  215. [ 12.436028@3] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  216. [ 12.439701@3] vout: vout_io_release
  217. [ 12.461443@0] usb 1-1: USB disconnect, device number 2
  218. [ 12.461476@0] usb 1-1.1: USB disconnect, device number 3
  219. [ 12.469725@0] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
  220. [ 12.474002@0] pl2303 1-1.1:1.0: device disconnected
  221. [ 12.486260@0] usb 1-1.2: USB disconnect, device number 4
  222. [ 12.486835@0] pl2303 ttyUSB1: pl2303 converter now disconnected from ttyUSB1
  223. [ 12.493251@0] pl2303 1-1.2:1.0: device disconnected
  224. [ 12.518241@0] usb 1-1.3: USB disconnect, device number 5
  225. [ 12.626078@3] aml_tdm_open
  226. [ 12.627383@0] aml_tdm_open
  227. [ 12.628824@1] asoc debug: earc_open-138
  228. [ 12.630705@3] asoc debug: earc_close-209
  229. [ 12.635038@0] loopback_dai_startup
  230. [ 12.639276@3] loopback_dai_shutdown
  231. [ 12.640910@1] aml_tdm_open
  232. [ 12.645146@1] aml_spdif_open
  233. [ 12.647311@3] aml_spdif_close
  234. [ 12.760001@2] lcd: Waiting STOP STATE LANE
  235. [ 12.760104@2] lcd: dsi init on
  236. [ 12.761590@2]
  237. [ 12.761590@2] ################### start #####################
  238. [ 12.771101@2]
  239. [ 12.771101@2] ################### ChipID over #####################
  240. [ 12.810947@2]
  241. LT8911EXB tx pll locked
  242. ***********************Read EDID***********************
  243. [ 12.830606@2]
  244. reg = 04
  245. 1111111
  246. read edid error: no_reply [ 12.909813@0] usb 1-1: new high-speed USB device number 6 using xhci-hcd
  247. [ 12.966101@0]
  248. video check: mipi clk =
  249. video check: Vtotal =
  250. video check: Hact(word counter) =
  251. video check: Vact =
  252. LT8911EXB tx pll locked[ 13.062544@0] hub 1-1:1.0: USB hub found
  253. [ 13.063269@0] hub 1-1:1.0: 7 ports detected
  254. [ 13.296163@0]
  255. *********************************************
  256.  
  257. MIPI Timing CLK = KHz
  258. [ 13.299215@2] lcd extern: lcd_extern_power_on
  259. [ 13.303585@2] lcd: clear mute
  260. [ 13.306521@2] vout: vout2: new mode panel set ok
  261. [ 13.311109@2] fb: current vmode=panel, cmd: 0x20000
  262. [ 13.316657@2] vout: vout2: vmode set to panel
  263. [ 13.316748@0] vout: vout2_io_open
  264. [ 13.316755@0] vout: vout2_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  265. [ 13.316765@0] vout: vout2_io_release
  266. [ 13.317075@0] vout: vout2_io_open
  267. [ 13.317082@0] vout: vout2_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  268. [ 13.317087@0] vout: vout2_io_release
  269. [ 13.345271@2] vout: vout2: don't set the same mode as current
  270. [ 13.351448@2] vout: vout2: vmode set to panel
  271. [ 13.355329@2] vout: vout2: don't set the same mode as current
  272. [ 13.362186@2] hdmitx: store_avmute 1
  273. [ 13.364566@2] hdmitx: hw: avmute set to 2
  274. [ 13.385831@0] usb 1-1.1: new full-speed USB device number 7 using xhci-hcd
  275. [ 13.418800@2] hdmitx: system: hdcp: set mode as -1
  276. [ 13.418952@2] hdmitx: system: store_phy 0
  277. [ 13.472204@2] hdmitx: system: set hdcp_pwr 1
  278. [ 13.505809@2] bl: aml_bl_on_function: bl_level=100, state=0xa
  279. [ 13.510139@0] pl2303 1-1.1:1.0: pl2303 converter detected
  280. [ 13.512783@0] usb 1-1.1: pl2303 converter now attached to ttyUSB0
  281. [ 13.513594@2] hdmitx: system: restore hdcp_pwr 0
  282. [ 13.523220@2] hdmitx: system: sname = 1080p60hz
  283. [ 13.526508@2] hdmitx: system: char_clk = 148500
  284. [ 13.531000@2] hdmitx: system: cd = 4
  285. [ 13.534555@2] hdmitx: system: cs = 2
  286. [ 13.538114@2] hdmitx: RX tmds clk: 150 Calc clk: 148
  287. [ 13.543755@2] vout: vmode set to 1080p60hz
  288. [ 13.547467@2] fb: current vmode=null, cmd: 0x10000
  289. [ 13.552088@2] hdmitx: hdmitx_set_current_vmode[3693]
  290. [ 13.557009@2] hdmitx: system: recalc before 1080p60hz 2997 50
  291. [ 13.562727@2] hdmitx: system: recalc after 1080p60hz 2997 50
  292. [ 13.568357@2] hdmitx: system: get current mode: 1080p60hz
  293. [ 13.573733@2] hdmitx: system: update rx hdr info 0
  294. [ 13.578497@2] hdmitx: system: update physcial size: 510 290
  295. [ 13.584063@2] hdmitx: video: already init VIC = 0 Now VIC = 16
  296. [ 13.589914@2] hdmitx: hw: div40: 0
  297. [ 13.593304@2] bl: backlight power on
  298. [ 13.619814@2] hdmitx: ddc w1b error 0x54 0x20 0x00
  299. [ 13.619849@2] hdmitx: frac_rate = 1
  300. [ 13.622481@2] hdmitx: config HPLL = 5940000 frac_rate = 1
  301. [ 13.625938@0] usb 1-1.2: new full-speed USB device number 8 using xhci-hcd
  302. [ 13.634735@2] hdmitx: HPLLv1: 0xdb3a04f7
  303. [ 13.638584@2] hdmitx: config HPLL done
  304. [ 13.642311@2] hdmitx: set_hpll_od3_clk_div[610] div = 6
  305. [ 13.647513@2] hdmitx: j = 4 vid_clk_div = 1
  306. [ 13.651759@2] hdmitx: set enc for VIC: 16
  307. [ 13.773831@2] hdmitx: hw: config hdmitx IP vic = 16 cd:4 cs: 2
  308. [ 13.784215@2] hdmitx: video: Sink is HDMI device
  309. [ 13.784274@2] hdmitx: hw: set audio
  310. [ 13.786685@2] hdmitx: hw: hdmitx tx_aud_src = 0
  311. [ 13.791204@2] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
  312. [ 13.796411@2] hdmitx: hw: aud_n_para = 5824
  313. [ 13.798475@0] pl2303 1-1.2:1.0: pl2303 converter detected
  314. [ 13.800535@0] usb 1-1.2: pl2303 converter now attached to ttyUSB1
  315. [ 13.812001@2] hdmitx: hw: set channel status
  316. [ 13.816263@2] hdmitx: audio: Audio Type: PCM
  317. [ 13.820497@2] vout: new mode 1080p60hz set ok
  318. [ 13.824820@2] fb: current vmode=1080p60hz, cmd: 0x20000
  319. [ 13.831557@1] vout: vout_io_open
  320. [ 13.834637@1] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  321. [ 13.840733@1] vout: vout_io_release
  322. [ 13.846912@2] hdmitx: system: store_phy 1
  323. [ 13.866517@0] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
  324. [ 13.897817@0] usb 1-1.3: new low-speed USB device number 9 using xhci-hcd
  325. [ 13.986536@2] hdmitx: store_avmute -1
  326. [ 13.986566@2] hdmitx: hw: avmute set to 1
  327. [ 14.060931@0] input: CHICONY HP Basic USB Keyboard as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:03F0:0024.0002/input/input7
  328. [ 14.134681@0] hid-generic 0003:03F0:0024.0002: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-xhci-hcd.0.auto-1.3/input0
  329. [ 15.085523@1] early_suspend_state=0
  330. [ 15.423686@1] fb: osd[0] enable: 1 scale:0x10001 (HwBinder:3350_2)
  331. [ 15.424232@1] fb: osd[0] enable: 1 scale:0x10001 (HwBinder:3350_2)
  332. [ 15.435962@1] fb: free_scale_switch to fb0, mode: 0x10001
  333. [ 15.436036@1] fb: set logo loaded
  334. [ 15.936617@0] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
  335. [ 15.939621@0] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
  336. [ 15.977037@2] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
  337. [ 16.119450@1] type=1400 audit(1591276340.264:36): avc: denied { open } for pid=3352 comm="light@2.0-servi" path="/sys/devices/platform/backlight/backlight/aml-bl/brightness" dev="sysfs" ino=22871 scontext=u:r:hal_light_default:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  338. [ 16.139523@0] type=1400 audit(1591276341.252:37): avc: denied { read } for pid=3599 comm="system_server" name="hctosys" dev="sysfs" ino=18357 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  339. [ 16.159627@0] type=1400 audit(1591276341.252:37): avc: denied { read } for pid=3599 comm="system_server" name="hctosys" dev="sysfs" ino=18357 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  340. [ 16.179027@0] type=1400 audit(1591276341.252:38): avc: denied { open } for pid=3599 comm="system_server" path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/hctosys" dev="sysfs" ino=18357 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  341. [ 16.312067@2] type=1400 audit(1591276341.252:38): avc: denied { open } for pid=3599 comm="system_server" path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/hctosys" dev="sysfs" ino=18357 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  342. [ 16.333200@2] type=1400 audit(1591276341.444:39): avc: denied { read } for pid=3599 comm="android.ui" name="state" dev="sysfs" ino=10169 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
  343. [ 16.354664@2] type=1400 audit(1591276341.444:39): avc: denied { read } for pid=3599 comm="android.ui" name="state" dev="sysfs" ino=10169 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
  344. [ 16.373853@2] type=1400 audit(1591276341.444:40): avc: denied { open } for pid=3599 comm="android.ui" path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev="sysfs" ino=10169 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
  345. [ 16.398238@2] type=1400 audit(1591276341.444:40): avc: denied { open } for pid=3599 comm="android.ui" path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev="sysfs" ino=10169 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
  346. [ 16.406912@0] fb: osd[0] enable: 1 scale:0x10001 (HwBinder:3350_2)
  347. [ 16.406916@0] fb: osd[0] enable: 1 scale:0x10001 (HwBinder:3350_2)
  348. [ 16.420333@0] fb: free_scale_switch to fb0, mode: 0x10001
  349. [ 16.441812@2] type=1400 audit(1591276341.444:41): avc: denied { getattr } for pid=3599 comm="android.ui" path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev="sysfs" ino=10169 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
  350. [ 17.094062@0] cectx ff80023c.aocec: init_cec_port_info phy_addr:1000, port num:1
  351. [ 17.095955@0] cectx ff80023c.aocec: port_seq=0x0
  352. [ 17.100607@0] cectx ff80023c.aocec: portinfo id:0 arc:0 phy:1100,type:0
  353. [ 17.283347@0] eth0: device MAC address 02:00:00:1c:15:01
  354. [ 17.367966@3] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
  355. [ 17.370405@3] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  356. [ 17.636064@3] sdcardfs version 2.0
  357. [ 17.636099@3] sdcardfs: dev_name -> /data/media
  358. [ 17.639111@3] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
  359. [ 17.649485@3] sdcardfs: mnt -> ec32c710
  360. [ 17.654331@3] sdcardfs: mounted on top of /data/media type ext4
  361. [ 17.685041@3] Remount options were mask=23,gid=9997 for vfsmnt ec32c810.
  362. [ 17.686171@3] sdcardfs : options - debug:1
  363. [ 17.692049@3] sdcardfs : options - gid:9997
  364. [ 17.701364@3] sdcardfs : options - mask:23
  365. [ 17.702461@3] Remount options were mask=7,gid=9997 for vfsmnt ea68b010.
  366. [ 17.706638@3] sdcardfs : options - debug:1
  367. [ 17.722816@3] sdcardfs : options - gid:9997
  368. [ 17.722846@3] sdcardfs : options - mask:7
  369. [ 17.856233@2] aml_wifi wifi: [usb_power_control] Set WiFi power down
  370. [ 18.148013@3] aml_wifi wifi: [usb_power_control] Set WiFi power on !
  371. [ 18.150223@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  372. [ 18.155333@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  373. [ 18.162841@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  374. [ 18.168333@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  375. [ 18.181087@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  376. [ 18.182072@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  377. [ 18.192522@3] meson-mmc: actual_clock :0, HHI_nand: 0x80
  378. [ 18.197685@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  379. [ 18.221873@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  380. [ 18.221979@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  381. [ 18.265142@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
  382. [ 18.268228@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  383. [ 18.274305@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  384. [ 18.282068@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
  385. [ 18.288637@3] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
  386. [ 18.412316@3] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
  387. [ 18.422062@3] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  388. [ 18.422518@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  389. [ 18.443183@3] meson-mmc: Data 1 aligned delay is 0
  390. [ 18.443237@3] meson-mmc: sdio: clk 199999997 tuning start
  391. [ 18.478671@3] meson-mmc: sdio: rx_tuning_result[0] = 40
  392. [ 18.485273@3] meson-mmc: sdio: rx_tuning_result[1] = 40
  393. [ 18.486503@3] meson-mmc: sdio: rx_tuning_result[2] = 40
  394. [ 18.500018@3] meson-mmc: sdio: rx_tuning_result[3] = 40
  395. [ 18.500111@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
  396. [ 18.509335@3] meson-mmc: sdio: best_win_start =0, best_win_size =4
  397. [ 18.513270@3] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x22000
  398. [ 18.549111@3] sdio: new ultra high speed SDR104 SDIO card at address 0001
  399. [ 18.550412@3] sdio: clock 199999997, 4-bit-bus-width
  400. [ 18.579490@3] meson-mmc: [sdio_reinit] finish
  401. [ 18.579534@3] aml_wifi wifi: [usb_power_control] Set WiFi power on !
  402. [ 18.780387@0] BT_RADIO going: on
  403. [ 18.780419@0] AML_BT: going ON
  404. [ 18.849668@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 18.851079@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  405. [ 18.857671@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  406. [ 18.863947@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  407. [ 18.870533@0] sd: req failed (CMD18): -84, retrying...
  408. [ 18.876173@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 18.879092@1] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
  409. [ 18.882332@2] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
  410. [ 18.900919@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  411. [ 18.907491@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  412. [ 18.914096@1] sd: req failed (CMD18): -84, retrying...
  413. [ 18.918024@3] aml_wifi wifi: [pci_reinit] pci wifi reinit!
  414. [ 18.918030@3] aml_wifi wifi: [wifi_power_ioctl] Set sdio wifi power up!
  415. [ 18.918165@3] aml_wifi wifi: [wifi_power_ioctl] wifi interface dev type: sdio, length = 4
  416. [ 18.941809@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 18.946073@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  417. [ 18.952657@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  418. [ 18.959174@0] sd: req failed (CMD18): -84, retrying...
  419. [ 18.966765@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 18.971024@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  420. [ 18.977605@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  421. [ 18.983868@2] meson-mmc: Command retried failed line:644, cmd:18
  422. [ 18.989948@0] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  423. [ 18.998180@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.004572@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  424. [ 19.011145@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  425. [ 19.017413@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  426. [ 19.024040@0] sd: req failed (CMD18): -84, retrying...
  427. [ 19.029616@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.036026@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  428. [ 19.042606@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  429. [ 19.049064@3] sd: req failed (CMD18): -84, retrying...
  430. [ 19.054562@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.060985@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  431. [ 19.067567@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  432. [ 19.074063@0] sd: req failed (CMD18): -84, retrying...
  433. [ 19.079540@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.085946@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  434. [ 19.092525@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  435. [ 19.098791@2] meson-mmc: Command retried failed line:644, cmd:18
  436. [ 19.104932@1] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  437. [ 19.113066@1] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.119490@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  438. [ 19.126074@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  439. [ 19.132339@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  440. [ 19.138921@1] sd: req failed (CMD18): -84, retrying...
  441. [ 19.144497@1] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.150946@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  442. [ 19.157534@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  443. [ 19.164012@0] sd: req failed (CMD18): -84, retrying...
  444. [ 19.169505@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.175904@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  445. [ 19.182484@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  446. [ 19.188939@3] sd: req failed (CMD18): -84, retrying...
  447. [ 19.194473@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.198290@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
  448. [ 19.198382@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 9600
  449. [ 19.198399@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
  450. [ 19.215766@1] dhd_module_init: in Dongle Host Driver, version 100.10.315.3 (r771911)
  451. [ 19.215782@1] ======== dhd_wlan_init_plat_data ========
  452. [ 19.215787@1] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=89, oob_irq_flags=0x418
  453. [ 19.215789@1] dhd_wlan_init_gpio: WL_REG_ON=-1
  454. [ 19.215791@1] dhd_wifi_platform_load: Enter
  455. [ 19.215818@1] Power-up adapter 'DHD generic adapter'
  456. [ 19.215821@1] wifi_platform_set_power = 1
  457. [ 19.215823@1] ======== PULL WL_REG_ON(-1) HIGH! ========
  458. [ 19.215843@1] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
  459. [ 19.275394@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  460. [ 19.281979@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  461. [ 19.288242@2] meson-mmc: Command retried failed line:644, cmd:18
  462. [ 19.290313@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
  463. [ 19.303049@0] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  464. [ 19.311356@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.317607@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  465. [ 19.324186@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  466. [ 19.330468@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  467. [ 19.337069@0] sd: req failed (CMD18): -84, retrying...
  468. [ 19.342695@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.349066@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  469. [ 19.355647@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  470. [ 19.362186@3] sd: req failed (CMD18): -84, retrying...
  471. [ 19.367635@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.374025@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  472. [ 19.380612@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  473. [ 19.387129@3] sd: req failed (CMD18): -84, retrying...
  474. [ 19.392537@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.398993@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  475. [ 19.405578@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  476. [ 19.411849@2] meson-mmc: Command retried failed line:644, cmd:18
  477. [ 19.417946@2] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  478. [ 19.426065@2] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.432533@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  479. [ 19.439111@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  480. [ 19.442389@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
  481. [ 19.451982@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  482. [ 19.458598@0] sd: req failed (CMD18): -84, retrying...
  483. [ 19.464199@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.470576@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  484. [ 19.477161@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  485. [ 19.483695@1] sd: req failed (CMD18): -84, retrying...
  486. [ 19.489103@1] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.495539@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  487. [ 19.502123@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  488. [ 19.508608@3] sd: req failed (CMD18): -84, retrying...
  489. [ 19.514150@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.520493@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  490. [ 19.527081@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  491. [ 19.533337@2] meson-mmc: Command retried failed line:644, cmd:18
  492. [ 19.539503@0] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  493. [ 19.549943@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.554032@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  494. [ 19.560613@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  495. [ 19.566886@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  496. [ 19.573549@1] sd: req failed (CMD18): -84, retrying...
  497. [ 19.579047@1] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.585498@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  498. [ 19.592072@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  499. [ 19.598535@3] sd: req failed (CMD18): -84, retrying...
  500. [ 19.603997@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.610452@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  501. [ 19.617043@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  502. [ 19.623546@3] sd: req failed (CMD18): -84, retrying...
  503. [ 19.628939@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.635411@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  504. [ 19.641993@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  505. [ 19.648259@2] meson-mmc: Command retried failed line:644, cmd:18
  506. [ 19.654387@3] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  507. [ 19.662073@0] blk_update_request: I/O error, dev mmcblk1, sector 0
  508. [ 19.668253@2] blk_update_request: I/O error, dev mmcblk1, sector 8
  509. [ 19.674337@1] blk_update_request: I/O error, dev mmcblk1, sector 16
  510. [ 19.680618@2] blk_update_request: I/O error, dev mmcblk1, sector 24
  511. [ 19.690099@2] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.693739@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  512. [ 19.700320@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  513. [ 19.706593@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  514. [ 19.713209@0] sd: req failed (CMD18): -84, retrying...
  515. [ 19.718777@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.725200@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  516. [ 19.731779@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  517. [ 19.738260@3] sd: req failed (CMD18): -84, retrying...
  518. [ 19.743748@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.750164@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  519. [ 19.756748@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  520. [ 19.763277@3] sd: req failed (CMD18): -84, retrying...
  521. [ 19.768722@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.775119@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  522. [ 19.781700@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  523. [ 19.787980@2] meson-mmc: Command retried failed line:644, cmd:18
  524. [ 19.794040@3] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  525. [ 19.802196@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.808666@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  526. [ 19.815239@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  527. [ 19.821509@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  528. [ 19.828193@3] sd: req failed (CMD18): -84, retrying...
  529. [ 19.833659@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.840119@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  530. [ 19.846700@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  531. [ 19.852940@0] IRQRatio___ERR.irq:73 ratio:66
  532. [ 19.857184@0] t_isr:662 t_total:1003, cnt:66
  533. [ 19.861762@3] sd: req failed (CMD18): -84, retrying...
  534. [ 19.867259@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.873659@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  535. [ 19.880240@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  536. [ 19.886719@3] sd: req failed (CMD18): -84, retrying...
  537. [ 19.892199@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.898619@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  538. [ 19.905199@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  539. [ 19.911473@2] meson-mmc: Command retried failed line:644, cmd:18
  540. [ 19.917590@1] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  541. [ 19.925759@1] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.932159@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  542. [ 19.938740@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  543. [ 19.945012@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  544. [ 19.951639@1] sd: req failed (CMD18): -84, retrying...
  545. [ 19.957208@1] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.963620@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  546. [ 19.970200@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  547. [ 19.976751@2] sd: req failed (CMD18): -84, retrying...
  548. [ 19.982084@2] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 19.988580@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  549. [ 19.995159@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  550. [ 20.001625@3] sd: req failed (CMD18): -84, retrying...
  551. [ 20.007106@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.013538@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  552. [ 20.017797@1] wifi_platform_bus_enumerate device present 1
  553. [ 20.017800@1] ======== Card detection to detect SDIO card! ========
  554. [ 20.017802@1] sdio_reset_comm():
  555. [ 20.017836@1] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
  556. [ 20.017840@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  557. [ 20.017842@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  558. [ 20.057731@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  559. [ 20.063992@2] meson-mmc: Command retried failed line:644, cmd:18
  560. [ 20.065392@1] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
  561. [ 20.065397@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  562. [ 20.065400@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  563. [ 20.066479@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  564. [ 20.066548@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  565. [ 20.070219@3] meson-mmc: actual_clock :0, HHI_nand: 0x80
  566. [ 20.070222@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  567. [ 20.093868@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  568. [ 20.093872@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  569. [ 20.130612@1] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  570. [ 20.140934@1] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.145192@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  571. [ 20.151765@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  572. [ 20.158037@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  573. [ 20.158306@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
  574. [ 20.161303@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  575. [ 20.164675@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  576. [ 20.170787@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
  577. [ 20.179865@1] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
  578. [ 20.192795@3] sd: req failed (CMD18): -84, retrying...
  579. [ 20.198375@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.204811@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  580. [ 20.211394@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  581. [ 20.218004@0] sd: req failed (CMD18): -84, retrying...
  582. [ 20.223546@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.229771@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  583. [ 20.236352@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  584. [ 20.242878@3] sd: req failed (CMD18): -84, retrying...
  585. [ 20.250577@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.254732@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  586. [ 20.261316@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  587. [ 20.267602@2] meson-mmc: Command retried failed line:644, cmd:18
  588. [ 20.273804@0] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  589. [ 20.282029@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.288277@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  590. [ 20.294853@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  591. [ 20.301128@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  592. [ 20.307796@0] sd: req failed (CMD18): -84, retrying...
  593. [ 20.313400@0] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.319734@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  594. [ 20.326313@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  595. [ 20.332950@2] sd: req failed (CMD18): -84, retrying...
  596. [ 20.340421@2] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.344700@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  597. [ 20.351272@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  598. [ 20.357955@2] sd: req failed (CMD18): -84, retrying...
  599. [ 20.365417@2] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.369653@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  600. [ 20.376232@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  601. [ 20.382505@2] meson-mmc: Command retried failed line:644, cmd:18
  602. [ 20.388642@3] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  603. [ 20.396823@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.403191@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  604. [ 20.409774@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  605. [ 20.416043@2] meson-mmc: meson_mmc_irq_thread_v3() 622: set 1st retry!
  606. [ 20.422707@2] sd: req failed (CMD18): -84, retrying...
  607. [ 20.428199@2] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.434654@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  608. [ 20.441241@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  609. [ 20.447939@1] sd: req failed (CMD18): -84, retrying...
  610. [ 20.453321@1] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.459620@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  611. [ 20.466204@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  612. [ 20.472801@3] sd: req failed (CMD18): -84, retrying...
  613. [ 20.478134@3] meson-mmc: sd: warning... data crc, vstat:0xe1ff000c, virqc:3fff[ 20.484573@0] meson-mmc: @ cmd 18 arg 0 with ecee312c; stop 0, status 4
  614. [ 20.491153@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  615. [ 20.497431@2] meson-mmc: Command retried failed line:644, cmd:18
  616. [ 20.503641@0] mmcblk1: response CRC error sending r/w cmd command, card status 0x900
  617. [ 20.511404@0] blk_update_request: I/O error, dev mmcblk1, sector 0
  618. [ 20.517478@2] Buffer I/O error on dev mmcblk1, logical block 0, async page read
  619. [ 20.586602@3] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
  620. [ 20.592103@3] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  621. [ 20.596836@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  622. [ 20.604341@3] meson-mmc: Data 1 aligned delay is 0
  623. [ 20.608687@3] meson-mmc: sdio: clk 199999997 tuning start
  624. [ 20.619065@1] meson-mmc: sdio: rx_tuning_result[0] = 40
  625. [ 20.621610@1] meson-mmc: sdio: rx_tuning_result[1] = 40
  626. [ 20.632414@2] meson-mmc: sdio: rx_tuning_result[2] = 40
  627. [ 20.636795@2] meson-mmc: sdio: rx_tuning_result[3] = 40
  628. [ 20.637271@2] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
  629. [ 20.638125@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 2000000 to 115200
  630. [ 20.653176@2] meson-mmc: sdio: best_win_start =0, best_win_size =4
  631. [ 20.659286@2] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x22000
  632. [ 20.667798@2] meson-mmc: [sdio_reinit] finish
  633. [ 20.689556@2] bcmsdh_sdmmc_probe: Enter num=1
  634. [ 20.689759@2] bcmsdh_sdmmc_probe: Enter num=2
  635. [ 20.692618@2] bus num (host idx)=2, slot num (rca)=1
  636. [ 20.697754@2] found adapter info 'DHD generic adapter'
  637. [ 20.703306@2] Wifi: bcmdhd_mem_prealloc: sectoin 3, size 139264
  638. [ 20.708795@2] succeed to alloc static buf
  639. [ 20.712594@2] Wifi: bcmdhd_mem_prealloc: sectoin 4, size 0
  640. [ 20.720566@1] sdioh_attach: set sd_f2_blocksize 256
  641. [ 20.726365@2] sdioh_attach: sd clock rate = 0
  642. [ 20.730401@2] dhdsdio_probe : no mutex held. set lock
  643. [ 20.732417@2] F1 signature read @0x18000000=0x17294359
  644. [ 20.745027@3] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
  645. [ 20.747381@3] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
  646. [ 20.753457@3] Wifi: bcmdhd_mem_prealloc: sectoin 7, size 24928
  647. [ 20.758946@3] dhd_conf_set_chiprev: chip=0x4359, chiprev=9
  648. [ 20.764423@3] Wifi: bcmdhd_mem_prealloc: sectoin 0, size 10320
  649. [ 20.771100@3] Wifi: bcmdhd_mem_prealloc: sectoin 5, size 65536
  650. [ 20.780716@3] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  651. [ 20.783891@3] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  652. [ 20.791730@3] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  653. [ 20.799625@3] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  654. [ 20.807476@3] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  655. [ 20.815377@3] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  656. [ 20.823260@3] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  657. [ 20.831142@3] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  658. [ 20.839034@3] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : [ 20.842924@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
  659. [ 20.853661@2] wdev null. Do nothing
  660. [ 20.857101@2] wl_escan_attach: Enter
  661. [ 20.860650@2] Wifi: bcmdhd_mem_prealloc: sectoin 19, size 67244
  662. [ 20.866562@2] wl_escan_init: Enter
  663. [ 20.870979@2] wl_create_event_handler(): thread:wl_escan_handler:1007 started
  664. [ 20.871004@0] tsk Enter, tsk = 0xed350160
  665. [ 20.881034@2] Wifi: bcmdhd_mem_prealloc: sectoin 20, size 262144
  666. [ 20.887106@2] Wifi: bcmdhd_mem_prealloc: sectoin 22, size 65536
  667. [ 20.894831@2] dhd_attach(): thread:dhd_watchdog_thread:1008 started
  668. [ 20.899378@2] dhd_attach(): thread:dhd_dpc:100a started
  669. [ 20.904622@2] dhd_attach(): thread:dhd_rxf:100b started
  670. [ 20.909610@2] dhd_deferred_work_init: work queue initialized
  671. [ 20.915153@2] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
  672. [ 20.921860@2] dhd_get_memdump_info: MEMDUMP ENABLED = 0
  673. [ 20.927035@2] Wifi: bcmdhd_mem_prealloc: sectoin 1, size 10300
  674. [ 20.932846@2] Wifi: bcmdhd_mem_prealloc: sectoin 2, size 65536
  675. [ 20.939421@3] sdioh_cis_read: func_cis_ptr[0]=0x10ac
  676. [ 20.965121@3] Dongle Host Driver, version 100.10.315.3 (r771911)
  677. [ 20.966443@3] ANDROID-MSG) wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0
  678. [ 20.972551@3] Register interface [wlan0] MAC: cc:4b:73:ae:83:5a
  679. [ 20.972551@3]
  680. [ 20.980445@0] dhd_dbg_detach_pkt_monitor, 1914
  681. [ 20.984532@2] dhd_bus_devreset: == Power OFF ==
  682. [ 20.989554@2] dhd_txglom_enable: enable 0
  683. [ 20.993158@2] dhd_conf_set_txglom_params: txglom_mode=copy
  684. [ 20.998436@2] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0
  685. [ 21.005088@2] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1
  686. [ 21.012038@2] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
  687. [ 21.019047@2] dhd_bus_devreset: WLAN OFF DONE
  688. [ 21.023607@2] wifi_platform_set_power = 0
  689. [ 21.027476@2] ======== PULL WL_REG_ON(-1) LOW! ========
  690. [ 21.032713@2] wl_escan_deinit: Enter
  691. [ 21.036267@2] wl_destroy_event_handler(): thread:wl_escan_handler:1007 wait for terminate
  692. [ 21.036277@1] wl_escan_event_handler: was terminated
  693. [ 21.049282@2] wl_destroy_event_handler(): thread:wl_escan_handler:1007 terminated OK
  694. [ 21.056998@2] dhdsdio_probe : the lock is released.
  695. [ 21.062141@2] dhd_module_init: Exit err=0
  696. [ 21.232173@3] dhd_open: Enter ea9a0800
  697. [ 21.232204@3] dhd_open : no mutex held. set lock
  698. [ 21.235857@3]
  699. [ 21.235857@3] Dongle Host Driver, version 100.10.315.3 (r771911)
  700. [ 21.242958@3] ANDROID-MSG) wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0
  701. [ 21.249567@3] wl_android_wifi_on in 1
  702. [ 21.253212@3] wl_android_wifi_on in 2: g_wifi_on=0
  703. [ 21.257901@3] wifi_platform_set_power = 1
  704. [ 21.261867@3] ======== PULL WL_REG_ON(-1) HIGH! ========
  705. [ 21.267312@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
  706. [ 21.503132@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
  707. [ 22.041834@3] sdio_reset_comm():
  708. [ 22.042465@0] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
  709. [ 22.049538@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  710. [ 22.055424@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  711. [ 22.064600@0] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
  712. [ 22.071974@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  713. [ 22.078106@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  714. [ 22.086256@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  715. [ 22.090663@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  716. [ 22.102276@0] meson-mmc: actual_clock :0, HHI_nand: 0x80
  717. [ 22.102994@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  718. [ 22.129863@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  719. [ 22.129971@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  720. [ 22.272534@2] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
  721. [ 22.276707@2] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  722. [ 22.282722@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  723. [ 22.289741@2] meson-mmc: Data 1 aligned delay is 0
  724. [ 22.294458@2] meson-mmc: sdio: clk 199999997 tuning start
  725. [ 22.301349@0] meson-mmc: sdio: rx_tuning_result[0] = 40
  726. [ 22.307388@2] meson-mmc: sdio: rx_tuning_result[1] = 40
  727. [ 22.311711@2] meson-mmc: sdio: rx_tuning_result[2] = 40
  728. [ 22.316953@3] meson-mmc: sdio: rx_tuning_result[3] = 40
  729. [ 22.320763@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
  730. [ 22.327837@3] meson-mmc: sdio: best_win_start =0, best_win_size =4
  731. [ 22.334058@3] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x22000
  732. [ 22.342462@3] sdioh_start: set sd_f2_blocksize 256
  733. [ 22.347653@3]
  734. [ 22.347653@3]
  735. [ 22.347653@3] dhd_bus_devreset: == WLAN ON ==
  736. [ 22.354978@2] F1 signature read @0x18000000=0x17294359
  737. [ 22.365109@3] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
  738. [ 22.367476@3] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
  739. [ 22.376369@2] dhd_conf_read_config: Ignore config file /vendor/etc/wifi/4359/config.txt
  740. [ 22.381503@2] Final fw_path=/vendor/etc/wifi/4359/fw_bcm4359c0_ag.bin
  741. [ 22.387890@2] Final nv_path=/vendor/etc/wifi/4359/nvram_ap6398s.txt
  742. [ 22.394109@2] Final clm_path=/vendor/etc/wifi/4359/clm.blob
  743. [ 22.399663@2] Final conf_path=/vendor/etc/wifi/4359/config.txt
  744. [ 22.406883@2] dhd_os_open_image1: /vendor/etc/wifi/4359/fw_bcm4359c0_ag.bin (606301 bytes) open success
  745. [ 22.522527@3] dhd_os_open_image1: /vendor/etc/wifi/4359/nvram_ap6398s.txt (5861 bytes) open success
  746. [ 22.527502@0] NVRAM version: AP6398S_NVRAM_V1.1_20170926
  747. [ 22.532221@3] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  748. [ 22.717388@2] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  749. [ 22.717901@2] si_get_pmu_reg_addr: addrRET: 18000670
  750. [ 22.723080@2] bcmsdh_oob_intr_register: HW_OOB irq=89 flags=0x8
  751. [ 22.728933@2] dhd_get_memdump_info: MEMDUMP ENABLED = 0
  752. [ 22.734342@2] Disable tdls_auto_op failed. -1
  753. [ 22.738212@2] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 1
  754. [ 22.745372@2] dhd_apply_default_clm: Ignore clm file /vendor/etc/wifi/4359/clm.blob
  755. [ 22.754567@0] Firmware up: op_mode=0x0405, MAC=cc:4b:73:ae:83:5a
  756. [ 22.763249@0] chip id is 17241
  757. [ 22.770779@2] Driver: 100.10.315.3 (r771911)
  758. [ 22.770779@2] Firmware: wl0: Jan 2 2019 14:30:52 version 9.87.51.11.25 (ba5357b@shgit) (r) FWID 01-b5e1a852
  759. [ 22.770779@2] CLM: 9.7.5
  760. [ 22.782873@3] dhd_txglom_enable: enable 1
  761. [ 22.786393@3] dhd_conf_set_txglom_params: txglom_mode=copy
  762. [ 22.791944@3] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0
  763. [ 22.798837@3] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1
  764. [ 22.805795@3] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
  765. [ 22.812763@3] dhd_conf_get_disable_proptx: fw_proptx=0, disable_proptx=1
  766. [ 22.821230@1] dhd_pno_init: Support Android Location Service
  767. [ 22.851501@1] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
  768. [ 22.854225@1] dhd_rtt_init : FTM is not supported
  769. [ 22.860676@0] failed to set WNM capabilities
  770. [ 22.873861@1] dhd_preinit_ioctls: Failed to get preserve log # !
  771. [ 22.874519@1] dhd_conf_set_country: set country CN, revision 38
  772. [ 22.882659@3] Country code: CN (CN/38)
  773. [ 22.885905@3] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23
  774. [ 22.897177@3] wl_android_wifi_on: Success
  775. [ 22.942187@2] wl_escan_init: Enter
  776. [ 22.942413@2] wl_create_event_handler(): thread:wl_escan_handler:1043 started
  777. [ 22.942422@0] tsk Enter, tsk = 0xed350160
  778. [ 22.951172@2] dhd_open : the lock is released.
  779. [ 22.955606@2] dhd_open: Exit ret=0
  780. [ 23.025937@3] P2P interface registered
  781. [ 23.025982@3] wl_cfgp2p_add_p2p_disc_if: wdev: ebbc6800, wdev->net: (null)
  782. [ 23.050326@2] WLC_E_IF: NO_IF set, event Ignored
  783. [ 23.067666@2] zram0: detected capacity change from 0 to 268435456
  784. [ 23.112003@0] mkswap: Swapspace size: 262140k, UUID=c9d514c3-4c7d-4849-8ff9-3ff26ffb7c44
  785. [ 23.115428@0] Adding 262140k swap on /dev/block/zram0. Priority:-1 extents:1 across:262140k SS
  786. [ 23.256566@1] Random MAC OUI to be used - da:1:19
  787. [ 23.259201@1] dhd_conf_set_country: set country US, revision -1
  788. [ 23.265169@2] Country code: US (US/0)
  789. [ 23.294081@1] wldev_set_country: set country for US as US rev 0
  790. [ 23.321356@2] dhd_dbg_attach_pkt_monitor, 1316
  791. [ 23.327932@1] net_os_enable_packet_filter: val = 0
  792. [ 23.329669@2] net_os_rxfilter_add_remove: add_remove = 0, num = 2
  793. [ 23.338290@2] net_os_enable_packet_filter: val = 1
  794. [ 23.341453@2] net_os_enable_packet_filter: val = 0
  795. [ 23.345986@2] net_os_rxfilter_add_remove: add_remove = 0, num = 3
  796. [ 23.355033@1] net_os_enable_packet_filter: val = 1
  797. [ 23.358229@1] dhd_set_suspend: Remove extra suspend setting
  798. [ 23.360231@1] dhd_enable_packet_filter: enter, value = 0
  799. [ 23.409655@0] selinux: SELinux: Skipping restorecon_recursive(/data/system_ce/0)
  800. [ 23.409655@0]
  801. [ 23.442366@2] selinux: SELinux: Skipping restorecon_recursive(/data/misc_ce/0)
  802. [ 23.442366@2]
  803. [ 23.488058@2] [wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0
  804. [ 23.806627@1] type=1400 audit(1591276345.928:45): avc: denied { open } for pid=3383 comm="rild" path="/sys/bus/usb/devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  805. [ 23.925269@1] type=1400 audit(1591276348.936:46): avc: denied { read } for pid=3383 comm="rild" name="devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  806. [ 23.943545@1] type=1400 audit(1591276348.936:46): avc: denied { read } for pid=3383 comm="rild" name="devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  807. [ 23.983623@1] type=1400 audit(1591276348.936:47): avc: denied { open } for pid=3383 comm="rild" path="/sys/bus/usb/devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  808. [ 24.003175@1] type=1400 audit(1591276348.936:47): avc: denied { open } for pid=3383 comm="rild" path="/sys/bus/usb/devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  809. [ 24.019716@1] type=1400 audit(1591276349.040:48): avc: denied { read } for pid=4173 comm="screencontrol" name="vndbinder" dev="tmpfs" ino=14559 scontext=u:r:screen_control:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  810. [ 24.111065@0] type=1400 audit(1591276349.040:48): avc: denied { read } for pid=4173 comm="screencontrol" name="vndbinder" dev="tmpfs" ino=14559 scontext=u:r:screen_control:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  811. [ 24.131381@0] type=1400 audit(1591276349.040:49): avc: denied { write } for pid=4173 comm="screencontrol" name="vndbinder" dev="tmpfs" ino=14559 scontext=u:r:screen_control:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  812. [ 24.161256@3] type=1400 audit(1591276349.040:49): avc: denied { write } for pid=4173 comm="screencontrol" name="vndbinder" dev="tmpfs" ino=14559 scontext=u:r:screen_control:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  813. [ 24.178162@3] type=1400 audit(1591276349.040:50): avc: denied { open } for pid=4173 comm="screencontrol" path="/dev/vndbinder" dev="tmpfs" ino=14559 scontext=u:r:screen_control:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  814. [ 24.276401@3] audit_log_lost: 1 callbacks suppressed
  815. [ 24.276406@3] audit: audit_lost=11 audit_rate_limit=5 audit_backlog_limit=64
  816. [ 24.283017@3] audit: rate limit exceeded
  817. [ 24.753606@2] audio_dsp: dts_dec_control/0x0
  818. [ 24.781347@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
  819. [ 24.782022@0] audio_dsp: last mode 0,now 0
  820. [ 24.951556@3] audio_dsp: drc high cut scale set to 100%
  821. [ 24.951894@3] audio_dsp: drc low boost scale set to 100%
  822. [ 24.956855@1] audio_dsp: drc mode set to LINE
  823. [ 25.461847@1] [wlan0] wl_escan_handler : SCAN COMPLETED: scanned AP count=1
  824. [ 25.560705@1] [wlan0] wl_cfg80211_connect : Connecting with 7a:8a:20:d2:fc:57 ssid "DSN",len (3) channel=44
  825.  
  826. [ 25.567780@1] dhd_dbg_start_pkt_monitor, 1436
  827. [ 25.569415@1] __dhd_dbg_free_tx_pkts, 1227
  828. [ 25.573380@1] __dhd_dbg_free_rx_pkts, 1246
  829. [ 25.622987@0] wl_iw_event: Link UP with 7a:8a:20:d2:fc:57
  830. [ 25.626252@0] [wlan0] wl_bss_connect_done : Report connect result - connection succeeded
  831. [ 25.663298@1] dhd_dev_apf_get_version: firmware doesn't support APF
  832. [ 25.663937@1] dhd_dev_apf_get_max_len: firmware doesn't support APF
  833. [ 25.694850@1] net_os_enable_packet_filter: val = 0
  834. [ 25.696448@1] net_os_rxfilter_add_remove: add_remove = 1, num = 2
  835. [ 25.704441@2] net_os_enable_packet_filter: val = 1
  836. [ 25.807177@0] dhd_set_suspend: Remove extra suspend setting
  837. [ 25.807559@0] dhd_enable_packet_filter: enter, value = 0
  838. [ 43.479503@0] [wlan0] wl_run_escan : LEGACY_SCAN sync ID: 1, bssidx: 0
  839. [ 47.850608@1] type=1400 audit(1591276351.936:73): avc: denied { open } for pid=3383 comm="rild" path="/sys/bus/usb/devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  840. [ 47.865312@1] type=1400 audit(1591276372.984:74): avc: denied { read } for pid=3383 comm="rild" name="devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  841. [ 47.887827@1] type=1400 audit(1591276372.984:74): avc: denied { read } for pid=3383 comm="rild" name="devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  842. [ 47.903403@1] type=1400 audit(1591276372.984:75): avc: denied { open } for pid=3383 comm="rild" path="/sys/bus/usb/devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  843. [ 47.937735@1] [wlan0] wl_escan_handler : SCAN COMPLETED: scanned AP count=2
  844. [ 62.777891@0] fb: mem_free_work, free memory: addr:800000
  845. [ 77.143569@0] [wlan0] wl_run_escan : LEGACY_SCAN sync ID: 2, bssidx: 0
  846. [ 81.595741@0] [wlan0] wl_escan_handler : SCAN COMPLETED: scanned AP count=1
  847. [ 85.516233@1] dhd_dbg_monitor_get_tx_pkts, 1728
  848. [ 85.516347@1] dhd_dbg_monitor_get_tx_pkts(): no tx_status in tx completion messages, make sure that 'd11status' is enabled in firmware, status_pos=0
  849. [ 85.531219@1] dhd_dbg_monitor_get_rx_pkts, 1825
  850. [ 116.097399@3] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
  851. [ 116.101512@3] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
  852. [ 116.975400@1] type=1400 audit(1591276372.984:75): avc: denied { open } for pid=3383 comm="rild" path="/sys/bus/usb/devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  853. [ 116.990347@1] type=1400 audit(1591276442.108:76): avc: denied { read } for pid=3383 comm="rild" name="devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  854. [ 117.009985@1] type=1400 audit(1591276442.108:76): avc: denied { read } for pid=3383 comm="rild" name="devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  855. [ 117.028250@1] type=1400 audit(1591276442.108:77): avc: denied { open } for pid=3383 comm="rild" path="/sys/bus/usb/devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  856. [ 117.133925@1] [wlan0] wl_run_escan : LEGACY_SCAN sync ID: 3, bssidx: 0
  857. [ 121.590070@1] [wlan0] wl_escan_handler : SCAN COMPLETED: scanned AP count=2
  858. [ 121.750405@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
  859. [ 129.325994@3] aml_tdm_open
  860. [ 129.326022@3] Not init audio effects
  861. [ 129.332022@3] asoc-aml-card auge_sound: tdm playback enable
  862. [ 131.996819@1] type=1400 audit(1591276442.108:77): avc: denied { open } for pid=3383 comm="rild" path="/sys/bus/usb/devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  863. [ 132.011571@1] type=1400 audit(1591276457.128:78): avc: denied { read } for pid=3383 comm="rild" name="devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  864. [ 132.030744@1] type=1400 audit(1591276457.128:78): avc: denied { read } for pid=3383 comm="rild" name="devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  865. [ 132.049656@1] type=1400 audit(1591276457.128:79): avc: denied { open } for pid=3383 comm="rild" path="/sys/bus/usb/devices" dev="sysfs" ino=9737 scontext=u:r:system_control:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  866. [ 134.185237@3] asoc-aml-card auge_sound: tdm playback stop
  867. [ 135.128154@3] aml_dai_tdm_hw_free(), disable mclk for TDM-B[ 139.817917@2] aml_tdm_open
  868. [ 139.817950@2] Not init audio effects
  869. [ 139.828385@2] asoc-aml-card auge_sound: tdm playback enable
  870. ▒[ 151.646872@3] asoc-aml-card auge_sound: tdm playback stop
  871. ▒[ 152.590144@3] aml_dai_tdm_hw_free(), disable mclk for TDM-B ▒▒▒▒▒ SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F;RCY:0; EMMC:0; READ:0;0.0;CHK:0;
  872. bl2_stage_init 0x01
  873. bl2_stage_init 0x81
  874. hw id: 0x0000 - pwm id 0x01
  875. bl2_stage_init 0xc1
  876. bl2_stage_init 0x02
  877.  
  878. L0:00000000
  879. L1:00000703
  880. L2:00008067
  881. L3:15000020
  882. S1:0000000
  883. B2:20282000
  884. B1:a0f83180
  885.  
  886. TE: 198451
  887.  
  888. BL2 Built : 15:21:48, Aug 28 2019. g12a g1bf2b53 - luan.yuan@droid15-sz
  889.  
  890. Board ID = 10
  891. Set cpu clk to 24M
  892. Set clk81 to 24M
  893. Use GP1_pll as DSU clk.
  894. DSU clk: 1200 Mhz
  895. CPU clk: 1200 MHz
  896. Set clk81 to 166.6M
  897. eMMC boot @ 0
  898. sw8 s
  899. DDR driver_vesion: LPDDR4_PHY_V_0_1_18 build time: Aug 28 2019 15:21:45
  900. board id: 10
  901. Lo!▒ FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  902. fw parse done
  903. Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
  904. Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
  905. PIEI prepare done
  906. fastboot data load
  907. 00000000
  908. emmc switch 1 ok
  909. ddr saved addr:00016000
  910. Load dd`parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
  911. 00000000
  912. emmc switch 0 ok
  913. fastboot data verify
  914. verify result: 265
  915. Cfg max: 5, cur: 1. Board id: 255. Force loop cfg
  916. DDR4 probe
  917. ddr clk to 1200MHz
  918. Load ddrfw from eMMC, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
  919. ▒
  920. dmc_version 0001
  921. Check phy result
  922. INFO : End of initialization
  923. INFO : End of read enable training
  924. INFO : End of fine write leveling
  925. INFO : ERROR : Training has failed!
  926. 1D training failed
  927. Cfg max: 5, cur: 2. Board id: 255. Force loop cfg
  928. DDRf probe
  929. ddr clk to 912MHz
  930. Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  931.  
  932. dmc_version 0001
  933. Check phy result
  934. INFO : End of initialization
  935. INFO : ERROR : Training has failed!
  936. 1D training failed
  937. Cfg max: 5, cur: 3. Board id: 255. Force lo!p cfg
  938. LPDDR4 probe
  939. ddr clk to 1200MHz
  940. Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  941.  
  942. dmc_version 0001
  943. Check phy result
  944. INFO : End of CA training
  945. INFO : End of initialization
  946. INFO : Training has run successfully!
  947. Check phy result
  948. INFO : End of initialization
  949. INFO : End of read enable training
  950. INFO : End of fine write leveling
  951. INFO : End of Write leveling coarse delay
  952. INFO : Training has run successfully!
  953. Check phy result
  954. INFO : End of initialization
  955. INFO : End of read dq deskew training
  956. INFO : End of MPR read delay center optimization
  957. INFO : End of write delay center optimization
  958. INFO : End of read delay center optimization
  959. INFO : End of max read latency training
  960. INFO : Training has run successfully!
  961. 1D training succeed
  962. Load ddrfw from eMMC, src: 0x00048200, des: 0xfffd0000, size: 0▒0000c000, part: 0
  963. Check phy result
  964. INFO : End of initialization
  965. I▒FO : End of 2D read delay Voltage center optimization
  966. INFO : End of 2D write delay Voltage center optimization
  967. INFO : Training has run successfully!
  968.  
  969. channel==0
  970. RxClkDly_Margin_A0==143 ps 11
  971. TxDqDly_Margin_A0==117 ps 9
  972. RxClkDly_Margin_A1==143 ps 11
  973. TxDqDly_Margin_A1==104 ps 8
  974. TrainedVREFDQ_A0==74
  975. TrainedVREFDQ_A1==74
  976. VrefDac_Margin_A0==27
  977. DeviceVref_Margin_A0==39
  978. VrefDac_Margin_A1==27
  979. DeviceVref_Margin_A1==39
  980.  
  981.  
  982. channel==1
  983. RxClkDly_Margin_A0==0 ps 0
  984. TxDqDly_Margin_A0==0 ps 0
  985. RxClkDly_Margin_A1==0 ps 0
  986. TxDqDly_Margin_A1==0 ps 0
  987. TrainedVREFDQ_A0==0
  988. TrainedVREFDQ_A1==0
  989. VrefDac_Margin_A0==0
  990. DeviceVref_Margin_A0==0
  991. VrefDa#▒Margin_A1==0
  992. DeviceVref_Margin_A1==0
  993.  
  994. dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
  995.  
  996. soc_vref_reg_value 0x 0000001a 0000001a 00000018 00000018 00000019 00000019 00000019 00000019 00000018 00000018 00000017 00000018 00000018 00000019 00000019 00000019 00000017 0000001a 00000017 0000001b 00000017 00000019 00000017 00000016 00000018 00000017 0000018 00000018 00000019 00000017 00000019 0000001a dram_vref_reg_value 0x 0000005e
  997. 2D training succeed
  998. aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_18 build time: Aug 28 2019 13:53:31
  999. auto size-- 65535DDR cs0 size: 2048MB
  1000. DDR cs1 size: 2048MB
  1001. DMC_DDR_CTRL: 00e00024DDR size: 3928MB
  1002. cs0 DataBus test pass
  1003. cs1 DataBus test pass
  1004. cs0 AddrBus test pass
  1005. cs1 AddrBus test pass
  1006.  
  1007. 100bdlr_step_size ps== 484
  1008. result report
  1009. boot times 0Enable ddr reg access
  1010. 00000000
  1011. emmc switch 3 ok
  1012. BL2: rpmb counter: 0x00000002
  1013. 00000000
  1014. emmc switch 0 ok
  1015. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  1016. Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0H000dc000, part: 0
  1017. bl2z: ptr: 05129330, size: 00001e40
  1018. 0.0;M3 CHK:0; cm4_sp_mode 0
  1019. MVN_1=0x00000000
  1020. MVN_2=0x00000000
  1021. [Image: g12a_v1.1.3390-6ac5299 2019-09-26 14:09:46 luan.yuan@droid15-sz]
  1022. OPS=0xb0
  1023. ring efuse init
  1024. 2b 0c b0 00 01 15 1c 00 00 11 32 34 50 4d 50 50
  1025. [0.017310 Inits done]
  1026. secure task start!
  1027. high task start!
  1028. low task start!
  1029. run into bl31
  1030. NOTICE: BL31: v1.3(release):4f#d0b1
  1031. NOTICE: BL31: Built : 15:57:33, May 22 2019
  1032. NOTICE: BL31: G12A normal boot!
  1033. NOTICE: BL31: BL33 decompress pass
  1034. ERROR: Error initializing runtime service opteed_fast
  1035.  
  1036.  
  1037. U-Boot 2015.01 (Mar 31 2020 - 20:45:26)
  1038.  
  1039. DRAM: 3.8 GiB
  1040. Relocation Offset is: d6e2b000
  1041. spi_post_bind(spifc): req_seq = 0
  1042. register usb cfg[0][1] = 00000000d7f2c1c8
  1043. aml_i▒_init_port init regs for 0
  1044. board_i2c_init ****
  1045. *** board_init ******
  1046. NAND: get_sys_clk_rate_mtd() 290, clock setting 200!
  1047. NAND device id: 0 df ff ff ff ff
  1048. No NAND device found!!!
  1049. nand init failed: -6
  1050. get_sys_clk_rate_mtd() 290, clock setting 200!
  1051. NAND device id: 0 df ff ff ff ff
  1052. No NAND device found!!!
  1053. nand init failed: -6
  1054. MMC: aml_priv->desc_buf = 0x0000000d3e1bc80
  1055. aml_priv->desc_buf = 0x00000000d3e1dfc0
  1056. SDIO Port B: 0, SDIO Port C: 1
  1057. co-phase 0x3, tx-dly 0, clock 400000
  1058. co-phase 0x3, tx-dly 0, clock 400000
  1059. co-phase 0x3, tx-dly 0, clock 400000
  1060. emmc/sd response timeout, cmd8, status=0x1ff2800
  1061. emmc/sd response timeout, cmd5, status=0x1ff2800
  1062. co-phase 0x3, tx-dl 0, clock 400000
  1063. co-phase 0x3, tx-dly 0, clock 40000000
  1064. aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x172000
  1065. [mmc_startup] mmc refix success
  1066. init_part() 297: PART_TYPE_AML
  1067. [mmc_init] mmc init success
  1068. Amlogic multi-dtb tool
  1069. GZIP format, decompress...
  1070. Multi dtb detected
  1071. Multi dtb tool version: v2 .
  1072. Support 4 dtbs.
  1073. aml_dt soc: sm1 platform: ac202 variant: 4g
  1074. dtb 0 soc: g12a plat: u202 vari: 1g
  1075. dtb 1 soc: g12a plat: u202 vari: 2g
  1076. dtb 2 soc: sm1 plat: ac202 vari: 2g
  1077. dtb 3 soc: sm1 plat: ac202 vari: 4g
  1078. @Find match dtb: 3
  1079. start dts,buffer=00000000d3e20830,dt_addr=00000000d3e20830
  1080. get_partition_from_dts() 91: ret 0
  1081. Amlogic multi-dtb tool
  1082. Single dtb detected
  1083. parts: 17
  1084. 00: logo 0000000000800000 1
  1085. 01: recovery 0000000001800000 1
  1086. 02: misc 0000000000800000 1
  1087. 03: dtbo 0000000000800000 1
  1088. 04: cri_data 0000000000800000 2
  1089. 05: P▒ram 0000000001000000 2
  1090. 06: boot 0000000001000000 1
  1091. set has_boot_slot = 0
  1092. 07: rsv 0000000001000000 1
  1093. 08: metadata 0000000001000000 1
  1094. 09: vbmeta 0000000000200000 1
  1095. 10: tee 000000000200`00 1
  1096. 11: vendor 0000000046000000 1
  1097. 12: odm 0000000008000000 1
  1098. 13: system 0000000050000000 1
  1099. 14: product 0000000008000000 1
  1100. 15: cache 0000000046000000 2
  1101. 16: data ffffffffffffffff 4
  1102. init_part() 297: PART_TYPE_AML
  1103. eMMC/TSD partition table have been checked OK!
  1104. crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
  1105. crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
  1106. crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
  1107. mmc env offset: 0x4d400000
  1108. In: serial
  1109. Out: serial
  1110. Err: serial
  1111. reboot_mode=cold_boot
  1112. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  1113. _verify_dtb_checksum()-3477: calc a87b3c49, store a87b3c49
  1114. _verify_dtb_checksum()-3477: calc a87b3c49, store a87b3c49
  1115. dtb_read()-3694: total ▒lid 2
  1116. update_old_dtb()-3675: do nothing
  1117. Amlogic multi-dtb tool
  1118. GZIP format, decompress...
  1119. Multi dtb detected
  1120. Multi dtb tool version: v2 .
  1121. Support 4 dtbs.
  1122. aml_dt soc: sm1 platform: ac202 variant: 4g
  1123. dtb 0 soc: g12a plat: u202 vari: 1g
  1124. dtb 1 s/▒: g12a plat: u202 vari: 2g
  1125. dtb 2 soc: sm1 plat: ac202 vari: 2g
  1126. dtb 3 soc: sm1 plat: ac202 vari: 4g
  1127. Find match dtb: 3
  1128. amlkey_init() enter!
  1129. [EFUSE_MSG]keynum is 4
  1130. vpu: clk_level in dts: 7
  1131. vpu: vpu_power_on
  1132. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  1133. vpu: vpu_module_init_config
  1134. vpp: vpp_init
  1135. vpp: vpp osd2 matrix rgb2yuv..............
  1136. cvbs: cpuid:0▒2b
  1137. lcd: detect mode: tablet, key_valid: 0
  1138. lcd: detect lcd_clk_path: 1
  1139. lcd: load config from dts
  1140. lcd: pinctrl_version: 2
  1141. lcd: use panel_type=lcd_4
  1142. lcd extern: load config from dts
  1143. lcd extern: i2c_LT8911B: no cmd_size
  1144. reg = 1111
  1145. i2c_addr = 29
  1146. aml_lcd_extern_i2c_lt8911_probe
  1147. lcd_extern_driver_update
  1148. lcd extern: add driver i2c_LT8911B(3)
  1149. lcd extern: aml_lcd_extern_probe ok
  1150. lcd e tern: load config from dts
  1151. lcd extern: i2c_LT8911B: no cmd_size
  1152. reg = 1111
  1153. i2c_addr = 29
  1154. aml_lcd_extern_i2c_lt8911_probe
  1155. lcd_extern_driver_update
  1156. lcd extern: add driver i2c_LT8911B(3)
  1157. lcd extern: aml_lcd_extern_probe ok
  1158. lcd: bl: pinctrl_version: 2
  1159. lcd: bl: name: backlight_pwm, method: 1
  1160. lcd: bl: aml_bl_power_ctrl: 0
  1161. Net: dwmac.ff3f0000amlkey_init() enter!
  1162. amlkey_init() 71: already init!
  1163. [EFUSE_MSG]keynum is 4
  1164. MACADDR:02:00:00:1#z15:01(from chipid)
  1165.  
  1166. CONFIG_AVB2: null
  1167. Start read misc partition datas!
  1168. info->magic =
  1169. info->version_major = 1
  1170. info->version_minor = 0
  1171. info->slots[0].priority = 15
  1172. info->slots[0].tries_remaining = 7
  1173. info->slots[0].successful_boot = 0
  1174. info->slots[1].priority = 14
  1175. info->slots[1].tries_remaining = 7
  1176. info->slots[1].successful_boot = 0
  1177. info->crc32 = -1075449479
  1178. active slot = 0
  1179. wipe_data=successful
  1180. wipe_cache=successful
  1181. upgrade_step=2
  1182. reboot_mode:::: cold_boot
  1183. amlkey_init() enter!
  1184. amlkey_init() 71: already init!
  1185. [EFUSE_MSG]keynum is 4
  1186. [KM]Error:f[key_manage_query_size]L515:key[usid] not pr/▒ramed yet
  1187. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  1188. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  1189. [KM]Error:f[key_manage_query_size]L515:key[region_code] not programed yet
  1190. ▒▒ edid preferred_mode is 1080p60hz[16]
  1191. hdr mode is 0
  1192. dv mode is ver:0 len: 0
  1193. hdr10+ mode is 0
  1194. osd: hpd_state=1
  1195. cvbs: outputmode[1080p60hz] is invalid
  1196. vpp: vpp_matrix_update: 2
  1197. set hdmitx VIC = 16
  1198. config HPLL = 5940000 frac_rate = 1
  1199. HPLL: 0x3b3a04f7
  1200. HPLL: 0x1b3a04f7
  1201. HPLLv1: 0xdb3a04f7
  1202. config HPLL done
  1203. j = 6 vid_clk_div = 1
  1204. hdmitx: set enc for VIC: 16
  1205. hdmitx phy setting done
  1206. enc_vpu_bridge_reset[1245]
  1207. rx version is 1.4 or below div=10
  1208. [OSD]load fb addr from dts:/m%son-fb
  1209. [OSD]load fb addr from dts:/fb
  1210. [OSD]set initrd_high: 0xdf800000
  1211. [OSD]fb_addr for logo: 0xdf800000
  1212. [OSD]load fb addr from dts:/meson-fb
  1213. [OSD]load fb addr from dts:/fb
  1214. [OSD]fb_addr for logo: 0xdf800000
  1215. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  1216. [CANVAS]canvas init
  1217. [CANVAS]addr=0xdf800000 width=3840, height=2160
  1218. [OSD]osd_hw.free_dst_data: 0,1919,0,1079
  1219. [OSD]osd1_update_disp_freescale_enable
  1220. cvbs: outputmode[panel] is invalid
  1221. hdmitx: outputmode[panel] is invalid
  1222. vpp: vpp_viu2_matrix_update
  1223. 0
  1224. lcd: tablet driver init(ver 20180718): mipi
  1225. lcd: lcd_pll_wait_lock_g12a: path=1, pll_lock=1, wait_loop=1
  1226. vpp: vpp_init_lcd_gamma_table
  1227. [OSD]load fb addr fr/e dts:/meson-fb
  1228. [OSD]load fb addr from dts:/fb
  1229. [OSD]fb_addr for logo: 0xdf800000
  1230. [OSD]load fb addr from dts:/meson-fb
  1231. [OSD]load fb addr from dts:/fb
  1232. [OSD]fb_addr for logo: 0xdf800000
  1233. [CANVAS]addr=0xdfbf4800 width=3840, height=2160
  1234. [OSD]wait_vsync_wakeup exit
  1235. [OSD]wait_vsync_wakeup exit
  1236. cvbs: outputmode[panel] is invalid
  1237. hdmitx: outputmode[panel] is invalid
  1238. lcd: enable: TL8911B, %▒pi, 1920x1080@54.9Hz
  1239. ▒ lcd: pixel_clk = 127.098MHz, bit_rate = 889.686MHz, lanebyteclk = 111.210MHz
  1240. lcd: Waiting STOP STATE LANE
  1241. lcd: dsi init on
  1242. lcd: [extern]i2c_LT8911B dsi init on
  1243. ext_config->i2c_bus = 0
  1244. aml_i2c_init_port init regs for 1
  1245.  
  1246. ################### start #####################
  1247.  
  1248. ################### ChipID over #####################
  1249.  
  1250. LT8911EXB tx pll locked
  1251. ***********************Read EDID***********************
  1252. ▒
  1253. reg = 04
  1254. read edid error: no_reply ▒ ▒ ▒ ▒▒ ▒ ▒ ▒
  1255. video check: mipi clk =
  1256. video check: Vtotal =
  1257. video check: Hact(word counter) =
  1258. video check: Vact =
  1259. LT8911EXB tx pll locked ▒ ▒
  1260. *********************************************
  1261.  
  1262. MIPI Timing CLK = KHz
  1263. aml_i2c_init_port init regs for 0
  1264. lcd: bl: set level: 100, last level: 0
  1265. ▒ lcd: bl: aml_bl_power_ctrl: 1
  1266. lcd: clear mute
  1267. vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
  1268. amlkey_init() enter!
  1269. amlkey_init() 71: already init!
  1270. [EFUS▒_MSG]keynum is 4
  1271. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  1272. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  1273. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  1274. [KM]Error:f[key_manage_query_size]L515:key[region_code] not progra-ed yet
  1275. gpio: pin GPIOAO_6 (gpio 6) value is 1
  1276. Command: bcb uboot-command
  1277. Start read misc partition datas!
  1278. BCB hasn't any datas,exit!
  1279. InUsbBurn
  1280. ▒ ▒ ▒ ▒ noSof
  1281. sof timeout, reset usb phy tuning
  1282. ▒ ▒ amlkey_init() enter!
  1283. amlkey_init() 71: already init!
  1284. [EFUSE_MSG]keynum is 4
  1285. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  1286. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  1287. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  1288. [KM]Error:f[key_manage_query_size]L515:key[region_code] not programed yet
  1289. Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
  1290. g12a_u202_v1#
  1291.  
  1292.  
  1293.  
  1294.  
  1295.  
  1296.  
  1297.  
  1298.  
  1299.  
  1300.  
  1301.  
  1302.  
  1303.  
  1304.  
  1305. g12a_u202_v1#printenv
  1306. 1080p60hz_deepcolor=444,8bit
  1307. EnableSelinux=permissive
  1308. Irq_check_en=0
  1309. active_slot=normal
  1310. aml_dt=sm1_ac202_4g
  1311. avb2=0
  1312. baudrate=115200
  1313. bcb_cmd=get_avb_mode;get_valid_slot;
  1314. board_defined_bootup=bootup_D3
  1315. boot_part=boot
  1316. bootargs=init=/init console=ttyS0,115200 no_console_suspend earlycon=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 rootfstype=ramfs otg_device=0 reboot_mode_android=normal logo=viu2_osd0,loaded,0x3d800000 vout2=panel, vout=1080p60hz,enable panel_type=lcd_4 lcd_ctrl=0x00000083 hdmitx=,444,8bit hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.serialno=1234567890 androidboot.wificountrycode=US
  1317. bootcmd=run storeboot
  1318. bootdelay=1
  1319. bootup_offset=0x1104290
  1320. bootup_secondary_offset=0x116f6d0
  1321. bootup_secondary_size=0x12042
  1322. bootup_size=0x3f4c8
  1323. cmdline_keys=if keyman init 0x1234; then if keyman read usid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.serialno=${usid};setenv serial ${usid};else setenv bootargs ${bootargs} androidboot.serialno=1234567890;setenv serial 1234567890;fi;if keyman read mac ${loadaddr} str; then setenv bootargs ${bootargs} mac=${mac} androidboot.mac=${mac};fi;if keyman read deviceid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.deviceid=${deviceid};fi;if keyman read region_code ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.wificountrycode=${region_code};else setenv bootargs ${bootargs} androidboot.wificountrycode=US;fi;fi;
  1324. colorattribute=444,8bit
  1325. cvbs_drv=0
  1326. cvbsmode=576cvbs
  1327. display_bpp=16
  1328. display_color_bg=0
  1329. display_color_fg=0xffff
  1330. display_color_index=16
  1331. display_height=1080
  1332. display_layer=viu2_osd0
  1333. display_width=1920
  1334. dtb_mem_addr=0x1000000
  1335. ethact=dwmac.ff3f0000
  1336. ethaddr=02:00:00:1c:15:01
  1337. factory_reset_poweroff_protect=echo wipe_data=${wipe_data}; echo wipe_cache=${wipe_cache};if test ${wipe_data} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi; if test ${wipe_cache} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi;
  1338. fb_addr=0x3d800000
  1339. fb_height=1080
  1340. fb_width=1920
  1341. fdt_high=0x20000000
  1342. fdtaddr=1000000
  1343. firstboot=0
  1344. frac_rate_policy=1
  1345. fs_type=rootfstype=ramfs
  1346. gatewayip=10.18.9.1
  1347. hdmi_read_edid=1
  1348. hdmimode=1080p60hz
  1349. hostname=arm_gxbb
  1350. identifyWaitTime=750
  1351. init_display=get_rebootmode;echo reboot_mode:::: ${reboot_mode};if test ${reboot_mode} = quiescent; then setenv reboot_mode_android quiescent;run storeargs;setenv bootargs ${bootargs} androidboot.quiescent=1;osd open;osd clear;else if test ${reboot_mode} = recovery_quiescent; then setenv reboot_mode_android quiescent;run storeargs;setenv bootargs ${bootargs} androidboot.quiescent=1;osd open;osd clear;else setenv reboot_mode_android normal;run storeargs;hdmitx hpd;hdmitx get_preferred_mode;osd dual_logo;vpp hdrpkt;fi;fi;
  1352. initargs=init=/init console=ttyS0,115200 no_console_suspend earlycon=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000
  1353. initrd_high=df800000
  1354. ipaddr=10.18.9.97
  1355. irremote_update=if irkey 2500000 0xe31cfb04 0xb748fb04; then echo read irkey ok!; if itest ${irkey_value} == 0xe31cfb04; then run update;else if itest ${irkey_value} == 0xb748fb04; then run update;\
  1356. fi;fi;fi;
  1357. jtag=disable
  1358. lcd_ctrl=0x00000083
  1359. loadaddr=1080000
  1360. lock=10001000
  1361. netmask=255.255.255.0
  1362. osd_reverse=0
  1363. otg_device=0
  1364. outputmode=1080p60hz
  1365. outputmode2=panel
  1366. panel_type=lcd_4
  1367. preboot=run bcb_cmd; run factory_reset_poweroff_protect;run upgrade_check;run init_display;run storeargs;run upgrade_key;forceupdate;bcb uboot-command;run switch_bootmode;
  1368. reboot_mode=cold_boot
  1369. reboot_mode_android=normal
  1370. recovery_from_flash=get_valid_slot;echo active_slot: ${active_slot};if test ${active_slot} = normal; then setenv bootargs ${bootargs} aml_dt=${aml_dt} recovery_part={recovery_part} recovery_offset={recovery_offset};if imgread kernel ${recovery_part} ${loadaddr} ${recovery_offset}; then wipeisb; bootm ${loadaddr}; fi;else setenv bootargs ${bootargs} aml_dt=${aml_dt} recovery_part=${boot_part} recovery_offset=${recovery_offset};if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;fi;
  1371. recovery_from_sdcard=if fatload mmc 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload mmc 0 ${loadaddr} recovery.img; then if fatload mmc 0 ${dtb_mem_addr} dtb.img; then echo sd dtb.img loaded; fi;wipeisb; bootm ${loadaddr};fi;
  1372. recovery_from_udisk=if fatload usb 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload usb 0 ${loadaddr} recovery.img; then if fatload usb 0 ${dtb_mem_addr} dtb.img; then echo udisk dtb.img loaded; fi;wipeisb; bootm ${loadaddr};fi;
  1373. recovery_offset=0
  1374. recovery_part=recovery
  1375. rpmb_state=1
  1376. sdc_burning=sdc_burn ${sdcburncfg}
  1377. sdcburncfg=aml_sdc_burn.ini
  1378. sdr2hdr=2
  1379. serial=1234567890
  1380. serverip=10.18.9.113
  1381. stderr=serial
  1382. stdin=serial
  1383. stdout=serial
  1384. storeargs=setenv bootargs ${initargs} ${fs_type} otg_device=${otg_device} reboot_mode_android=${reboot_mode_android} logo=${display_layer},loaded,${fb_addr} vout2=${outputmode2}, vout=${outputmode},enable panel_type=${panel_type} lcd_ctrl=${lcd_ctrl} hdmitx=${cecconfig},${colorattribute} hdmimode=${hdmimode} frac_rate_policy=${frac_rate_policy} hdmi_read_edid=${hdmi_read_edid} cvbsmode=${cvbsmode} osd_reverse=${osd_reverse} video_reverse=${video_reverse} irq_check_en=${Irq_check_en} androidboot.selinux=${EnableSelinux} androidboot.firstboot=${firstboot} jtag=${jtag}; setenv bootargs ${bootargs} androidboot.hardware=amlogic;run cmdline_keys;
  1385. storeboot=boot_cooling;get_system_as_root_mode;echo system_mode: ${system_mode};if test ${system_mode} = 1; then setenv fs_type ro rootwait skip_initramfs;run storeargs;fi;get_valid_slot;get_avb_mode;echo active_slot: ${active_slot};if test ${active_slot} != normal; then setenv bootargs ${bootargs} androidboot.slot_suffix=${active_slot};fi;if test ${avb2} = 0; then if test ${active_slot} = _a; then setenv bootargs ${bootargs} root=/dev/mmcblk0p23;else if test ${active_slot} = _b; then setenv bootargs ${bootargs} root=/dev/mmcblk0p24;fi;fi;fi;if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;run update;
  1386. switch_bootmode=get_rebootmode;if test ${reboot_mode} = factory_reset; then setenv reboot_mode_android normal;run storeargs;run recovery_from_flash;else if test ${reboot_mode} = update; then setenv reboot_mode_android normal;run storeargs;run update;else if test ${reboot_mode} = quiescent; then setenv reboot_mode_android quiescent;run storeargs;setenv bootargs ${bootargs} androidboot.quiescent=1;else if test ${reboot_mode} = recovery_quiescent; then setenv reboot_mode_android quiescent;run storeargs;setenv bootargs ${bootargs} androidboot.quiescent=1;run recovery_from_flash;else if test ${reboot_mode} = cold_boot; then setenv reboot_mode_android normal;run try_auto_burn;run storeargs;else if test ${reboot_mode} = fastboot; then setenv reboot_mode_android normal;run storeargs;fastboot;fi;fi;fi;fi;fi;fi;
  1387. try_auto_burn=update 700 750;
  1388. update=run usb_burning; run sdc_burning; if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;
  1389. upgrade_check=echo upgrade_step=${upgrade_step}; if itest ${upgrade_step} == 3; then run init_display; run storeargs; run update;else fi;
  1390. upgrade_key=if gpio input GPIOAO_6; then echo detect upgrade key; run update;fi;
  1391. upgrade_step=2
  1392. usb_burning=update 1000
  1393. video_reverse=0
  1394. wipe_cache=successful
  1395. wipe_data=successful
  1396.  
  1397. Environment size: 7929/65532 bytes
  1398. g12a_u202_v1#
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!