Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Marvell>> bootm 0x008000000
- ## Booting image at 08000000 ...
- Image Name: L4 Image #8
- Created: 2011-12-06 9:23:42 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 11067392 Bytes = 10.6 MB
- Load Address: 01000000
- Entry Point: 01000000
- Verifying Checksum ... OK
- OK
- Starting kernel ...
- Hello from Startup::stage2
- Initialize page table
- Vmem_alloc::init()
- Cache config: ON
- SERIAL ESC: allocated IRQ 33 for serial uart
- Not using serial hack in slow timer handler.
- Welcome to Fiasco.OC (arm)!
- L4/Fiasco.OC arm microkernel (C) 1998-2011 TU Dresden
- Rev: r38 compiled with gcc 4.4.5 for Marvell Kirkwood []
- Build: #1 Sat Dec 3 16:04:29 CET 2011
- Calibrating timer loop... done.
- SIGMA0: Hello!
- KIP @ 2000
- allocated 4KB for maintenance structures
- SIGMA0: Dump of all resource maps
- RAM:------------------------
- [0:0;fff]
- [0:59000;8ffff]
- [0:97000;97fff]
- [0:9f000;13ffff]
- [4:140000;172fff]
- [0:173000;177fff]
- [4:178000;18efff]
- [0:18f000;100dfff]
- [4:100e000;100efff]
- [0:100f000;118cfff]
- [4:118d000;1b79fff]
- [0:1b7a000;effffff]
- IOMEM:----------------------
- [0:10000000;ffffffff]
- MOE: Hello world
- MOE: found 234884 KByte free memory
- MOE: found RAM from 59000 to f000000
- MOE: allocated 239 KByte for the page array @0x9f000
- MOE: virtual user address space [0-bfffffff]
- MOE: rom name space cap -> [C:501000]
- BOOTFS: [118d000-11a6448] [C:503000] l4re
- BOOTFS: [11a7000-11fa21c] [C:504000] ned
- BOOTFS: [11fb000-11fb3ab] [C:505000] l4lx-multi.cfg
- BOOTFS: [11fc000-12d6b78] [C:506000] io
- BOOTFS: [12d7000-12d70bd] [C:507000] arm-rv.io
- BOOTFS: [12d8000-1579474] [C:508000] vmlinuz.arm
- BOOTFS: [157a000-187a000] [C:509000] ramdisk-client-arm.rd
- BOOTFS: [187a000-1b7a000] [C:50a000] ramdisk-control-arm.rd
- MOE: cmdline: moe rom/l4lx-multi.cfg
- MOE: Starting: rom/ned rom/l4lx-multi.cfg
- MOE: loading 'rom/ned'
- Ned says: Hi World!
- Ned: loading file: 'rom/l4lx-multi.cfg'
- l4linux | libio: Warning: Query of 'vbus' failed!
- l4linux | PH 0 (t: 1) offs=00008000 vaddr=00100000 vend=003ff8d4
- l4linux | phys=00100000 ephys=003ff8d4
- l4linux | f_sz=0028039c memsz=002ff8d4 flgs=rwx
- l4linux | libio: Warning: Query of 'vbus' failed!
- l4linux | PH 0 (t: 1) offs=00008000 vaddr=00100000 vend=003ff8d4
- l4linux | phys=00100000 ephys=003ff8d4
- l4linux | f_sz=0028039c memsz=002ff8d4 flgs=rwx
- l4linux | PH 1 (t: 4) offs=00288378 vaddr=00380378 vend=0038039c
- l4linux | phys=00380378 ephys=0038039c
- l4linux | f_sz=00000024 memsz=00000024 flgs=r-x
- l4linux | PH 2 (t: 1685382481) offs=00000000 vaddr=00000000 vend=00000000
- l4linux | phys=00000000 ephys=00000000
- l4linux | f_sz=00000000 memsz=00000000 flgs=rwx
- l4linux | Starting binary at 0x11c2f8, argc=6 argv=0x80007f8c *argv=0xb1007ff0 argv0=rom/vmlinuz.arm
- l4linux | External resolver is at 0xa80006e0
- l4linux | ======> L4Linux 2.6 starting... <========
- l4linux | Linux version 3.0.0-l4-svn23 (root@thinky) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 Mon Dec 5 18:45:12 CET 2011
- l4linux | Binary name: rom/vmlinuz.arm
- l4linux | This is an AEABI build.
- l4linux | Linux kernel command line (5 args): mem=64M l4x_rd=rom/ramdisk-client-arm.rd l4ser_shm.add=shmns root=1:0 ramdisk_size=4000
- l4linux | CPU mapping (l:p)[1]: 0:0
- l4linux | Image: 00100000 - 00400000 [3072 KiB].
- l4linux | Areas: Text: 00100000 - 00364000 [2448kB] (a bit longer)
- l4linux | Data: 00364000 - 0037b460 [93kB]
- l4linux | Initdata: 00100000 - 0011b000 [108kB]
- l4linux | BSS: 0038039c - 003ff8d4 [509kB]
- l4linux | Device scan:
- l4linux | l4lx_thread_create: Created thread 414 (cpu0) (u:b3000400, v:b3000600, sp:00365ff0)
- l4linux | main thread will be 414
- l4linux | l4x_register_pointer_section: addr = 00100000 size = 3145728
- l4linux | section-with-init: virt: 0x100000 to 0x3ff8d3 [3070 KiB]
- l4linux | section-with-init: Phys: 0x0055b000 to 0x0085a8d4, Size: 3143892
- l4linux | PH 1 (t: 4) offs=00288378 vaddr=00380378 vend=0038039c
- l4linux | phys=00380378 ephys=0038039c
- l4linux | f_sz=00000024 memsz=00000024 flgs=r-x
- l4linux | PH 2 (t: 1685382481) offs=00000000 vaddr=00000000 vend=00000000
- l4linux | phys=00000000 ephys=00000000
- l4linux | f_sz=00000000 memsz=00000000 flgs=rwx
- l4linux | Starting binary at 0x11c2f8, argc=7 argv=0x80007f8c *argv=0xb1007ff0 argv0=rom/vmlinuz.arm
- l4linux | External resolver is at 0xa80006e0
- l4linux | ======> L4Linux 2.6 starting... <========
- l4linux | Linux version 3.0.0-l4-svn23 (root@thinky) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 Mon Dec 5 18:45:12 CET 2011
- l4linux | Binary name: rom/vmlinuz.arm
- l4linux | This is an AEABI build.
- l4linux | Linux kernel command line (6 args): mem=64M console=ttyLv0 l4x_rd=rom/ramdisk-control-arm.rd l4ser_shm.add=shmns,create root=1:0 ramdisk_size=4000
- l4linux | CPU mapping (l:p)[1]: 0:0
- l4linux | Image: 00100000 - 00400000 [3072 KiB].
- l4linux | Areas: Text: 00100000 - 00364000 [2448kB] (a bit longer)
- l4linux | Data: 00364000 - 0037b460 [93kB]
- l4linux | Initdata: 00100000 - 0011b000 [108kB]
- l4linux | BSS: 0038039c - 003ff8d4 [509kB]
- l4linux | Device scan:
- l4linux | l4lx_thread_create: Created thread 414 (cpu0) (u:b3000400, v:b3000600, sp:00365ff0)
- l4linux | main thread will be 414
- l4linux | l4x_register_pointer_section: addr = 00100000 size = 3145728
- l4linux | section-with-init: virt: 0x100000 to 0x3ff8d3 [3070 KiB]
- l4linux | section-with-init: Phys: 0x00257000 to 0x005568d4, Size: 3143892
- l4linux | l4x_linux_startup: thread 414.
- l4linux | Main thread running, waiting...
- l4linux | main thread: received startup message.
- l4linux | l4x_setup_memory: Forcing superpages for main memory
- l4linux | l4re_global_env: 0xb1007efc
- l4linux | Main memory size: 64MB
- l4linux | l4x_linux_startup: thread 414.
- l4linux | Main thread running, waiting...
- l4linux | main thread: received startup message.
- l4linux | l4x_setup_memory: Forcing superpages for main memory
- l4linux | l4re_global_env: 0xb1007ee4
- l4linux | Main memory size: 64MB
- l4linux | Main memory: virt: 0x400000 to 0x43fffff [65536 KiB]
- l4linux | Main memory: Phys: 0x01c00000 to 0x05c00000, Size: 67108864
- l4linux | Filling lower ptabs...
- l4linux | Done (254 entries).
- l4linux | Main memory: virt: 0x400000 to 0x43fffff [65536 KiB]
- l4linux | Main memory: Phys: 0x05c00000 to 0x09c00000, Size: 67108864
- l4linux | Filling lower ptabs...
- l4linux | l4x_register_pointer_section: addr = 00100000 size = 3145728
- l4linux | end: virt: 0x100000 to 0x3ff8d3 [3070 KiB]
- l4linux | end: Phys: 0x0055b000 to 0x0085a8d4, Size: 3143892
- l4linux | l4x_virt_to_phys: Could not translate virt. address 0x3fffff
- l4linux | l4x_rd_path: rom/ramdisk-client-arm.rd
- l4linux | INITRD: Size of RAMdisk is 3072KiB
- l4linux | RAMdisk from 0c400000 to 0c700000 [3072KiB]
- l4linux | Done (254 entries).
- l4linux | l4x_register_pointer_section: addr = 00100000 size = 3145728
- l4linux | end: virt: 0x100000 to 0x3ff8d3 [3070 KiB]
- l4linux | end: Phys: 0x00257000 to 0x005568d4, Size: 3143892
- l4linux | l4x_virt_to_phys: Could not translate virt. address 0x3fffff
- l4linux | l4x_rd_path: rom/ramdisk-control-arm.rd
- l4linux | Loading: rom/ramdisk-control-arm.rd
- l4linux | INITRD: Size of RAMdisk is 3072KiB
- l4linux | l4lx_thread_create: Created thread 41a (timer.i0) (u:b3000800, v:00000000, sp:00399ff4)
- l4linux | timer_irq_thread: Starting timer IRQ thread.
- l4linux | RAMdisk from 0c400000 to 0c700000 [3072KiB]
- l4linux | l4lx_thread_create: Created thread 41a (timer.i0) (u:b3000800, v:00000000, sp:00399ff4)
- Linux version 3.0.0-l4-svn23 (root@thinky) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 Mon Dec 5 18:45:12 CET 2011
- CPU: Fiasco [860f0001] revision 1 (ARMvundefined/unknown), cr=00000000
- CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- l4linux | timer_irq_thread: Starting timer IRQ thread.
- cpu_arm926_proc_init
- Machine: L4
- Memory policy: ECC disabled, Data cache writeback
- arm926_flush_kern_cache_all()
- v = 00100000 p = 00257000 sz = 2ff8d4
- v = 00400000 p = 05c00000 sz = 4000000
- v = 00100000 p = 00257000 sz = 2ff8d4
- ------------[ cut here ]------------
- WARNING: at /opt/l4/src/l4linux/arch/l4/kernel/main.c:385 l4x_virt_to_phys+0x98/0xd4()
- Modules linked in:
- [<0012771c>] (unwind_backtrace+0x0/0xf4) from [<001379d0>] (warn_slowpath_common+0x4c/0x64)
- [<001379d0>] (warn_slowpath_common+0x4c/0x64) from [<00137a04>] (warn_slowpath_null+0x1c/0x24)
- [<00137a04>] (warn_slowpath_null+0x1c/0x24) from [<0011e7f8>] (l4x_virt_to_phys+0x98/0xd4)
- [<0011e7f8>] (l4x_virt_to_phys+0x98/0xd4) from [<00103a1c>] (setup_arch+0x260/0x4a8)
- [<00103a1c>] (setup_arch+0x260/0x4a8) from [<001004c4>] (start_kernel+0x64/0x2b8)
- [<001004c4>] (start_kernel+0x64/0x2b8) from [<0010333c>] (l4x_linux_startup+0x264/0x2b8)
- [<0010333c>] (l4x_linux_startup+0x264/0x2b8) from [<00000000>] ( (null))
- ---[ end trace 1b75b31a2719ed1c ]---
- INITRD: 0c400000 - 0c700000
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 17017
- Kernel command line: mem=64M console=ttyLv0 l4x_rd=rom/ramdisk-control-arm.rd l4ser_shm.add=shmns,create root=1:0 ramdisk_size=4000
- PID hash table entries: 512 (order: -1, 2048 bytes)
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Memory: 0MB 67MB = 67MB total
- Memory: 64840k/64840k available, 3772k reserved, 0K highmem
- Virtual kernel memory layout:
- vector : 0xbffff000 - 0xc0000000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- vmalloc : 0x04400000 - 0x0c400000 ( 128 MB)
- lowmem : 0x00000000 - 0x04400000 ( 68 MB)
- modules : 0xff100000 - 0x00100000 ( 16 MB)
- .init : 0x00100000 - 0x0011b000 ( 108 kB)
- .text : 0x0011c000 - 0x00362148 (2329 kB)
- .data : 0x00364000 - 0x0037b460 ( 94 kB)
- .bss : 0x0038039c - 0x003ff8d4 ( 510 kB)
- NR_IRQS:220
- l4lx_irq_init: l4lx_irq_max = 220
- l4lx_irq_dev_startup_timer(0)
- Console: colour dummy device 80x30
- console [ttyLv0] enabled
- Calibrating delay loop... 706.56 BogoMIPS (lpj=3532800)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- NET: Registered protocol family 16
- bio: create slab <bio-0> at 0
- Failed to create "l4x" debugfs directory: 1
- Switching to clocksource kip
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- Trying to unpack rootfs image as initramfs...
- rootfs image is not initramfs (junk in compressed archive); looks like an initrd
- INITRD: Freeing memory.
- NetWinder Floating Point Emulator V0.97 (double precision)
- msgmni has been set to 126
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- L4 serial driver
- ttyLv0 at MMIO 0x1 (irq = 210) is a L4
- L4 shared mem serial driver
- l4ser_shm: Requesting, role Creator, Shmsize 32 Kbytes
- l4ser_shm: Adding 'shmns'
- ttyLs0 at MMIO 0x1 (irq = 211) is a L4
- l4cdds: No name given, not starting.
- brd: module loaded
- l4bdds: No name given, not starting.
- mousedev: PS/2 mouse device common for all mice
- TCP cubic registered
- NET: Registered protocol family 17
- RAMDISK: ext2 filesystem found at block 0
- RAMDISK: Loading 3072KiB [1 disk] into ram disk... done.
- VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
- Freeing init memory: 108K
- init started: BusyBox v1.13.4 (2009-05-10 12:06:03 CEST)
- starting pid 16, tty '': '/etc/init.d/rcS'
- L4Linux Control Instance
- ************************
- starting pid 19, tty '': '-/bin/sh'
- #
Add Comment
Please, Sign In to add comment