Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2017.11 (Jul 09 2018 - 18:41:02)
- DRAM: 512 MiB(408MHz)
- CPU Freq: 408MHz
- memory test: 1
- Pattern 55aa Writing...Reading...OK
- Trying to boot from MMC1
- Boot device: sd
- U-Boot 2017.11 (Jul 09 2018 - 18:41:02 +0800) Allwinner Technology
- CPU: Allwinner H3 (SUN8I 1680)
- Model: FriendlyElec NanoPi H3
- DRAM: 512 MiB
- CPU Freq: 1008MHz
- MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Net: No ethernet found.
- BOARD: nanopi-neo-air
- starting USB...
- No controllers found
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot.scr
- reading /boot.scr
- 968 bytes read in 20 ms (46.9 KiB/s)
- ## Executing script at 43100000
- reading zImage
- 5743960 bytes read in 561 ms (9.8 MiB/s)
- reading rootfs.cpio.gz
- 2845838 bytes read in 260 ms (10.4 MiB/s)
- reading sun8i-h3-nanopi-neo-air.dtb
- 36832 bytes read in 29 ms (1.2 MiB/s)
- ## Flattened Device Tree blob at 48000000
- Booting using the fdt blob at 0x48000000
- Loading Ramdisk to 49b00000, end 4a000000 ... OK
- Loading Device Tree to 49af4000, end 49afffdf ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.14.52 (root@wwd) (gcc version 4.9.3 (ctng-1.21.0-229g-FA)) #96 SMP Mon Jul 9 18:40:55 CST 2018
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: FriendlyElec NanoPi-NEO-Air
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] Reserved memory: created CMA memory pool at 0x000000005bc00000, size 64 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
- [ 0.000000] percpu: Embedded 16 pages/cpu @dff5f000 s36544 r8192 d20800 u65536
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920
- [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait fsck.repair=yes panic=10 fbcon=map:0
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 430932K/524288K available (10240K kernel code, 379K rwdata, 1972K rodata, 2048K init, 318K bss, 27820K reserved, 65536K cma-reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0c00000 (12256 kB)
- [ 0.000000] .init : 0xc1000000 - 0xc1200000 (2048 kB)
- [ 0.000000] .data : 0xc1200000 - 0xc125efb8 ( 380 kB)
- [ 0.000000] .bss : 0xc126759c - 0xc12b6fec ( 319 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000019] Switching to timer-based delay loop, resolution 41ns
- [ 0.000238] Console: colour dummy device 80x30
- [ 0.000273] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
- [ 0.000287] pid_max: default: 32768 minimum: 301
- [ 0.000438] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000451] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.001173] CPU: Testing write buffer coherency: ok
- [ 0.001609] CPU0: update cpu_capacity 1024
- [ 0.001621] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.001959] Setting up static identity map for 0x40200000 - 0x40200060
- [ 0.002073] Hierarchical SRCU implementation.
- [ 0.002595] smp: Bringing up secondary CPUs ...
- [ 0.013328] CPU1: update cpu_capacity 1024
- [ 0.013334] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.024135] CPU2: update cpu_capacity 1024
- [ 0.024140] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.034871] CPU3: update cpu_capacity 1024
- [ 0.034877] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.034950] smp: Brought up 1 node, 4 CPUs
- [ 0.034978] SMP: Total of 4 processors activated (192.00 BogoMIPS).
- [ 0.034985] CPU: All CPU(s) started in HYP mode.
- [ 0.034990] CPU: Virtualization extensions available.
- [ 0.035721] devtmpfs: initialized
- [ 0.042662] random: get_random_u32 called from bucket_table_alloc+0xf0/0x240 with crng_init=0
- [ 0.043189] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.043464] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
- [ 0.043487] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.046264] xor: measuring software checksum speed
- [ 0.094714] arm4regs : 1371.200 MB/sec
- [ 0.144768] 8regs : 768.800 MB/sec
- [ 0.194827] 32regs : 850.400 MB/sec
- [ 0.244882] neon : 1280.000 MB/sec
- [ 0.244889] xor: using function: arm4regs (1371.200 MB/sec)
- [ 0.244910] pinctrl core: initialized pinctrl subsystem
- [ 0.245881] NET: Registered protocol family 16
- [ 0.247458] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.248265] cpuidle: using governor ladder
- [ 0.248306] cpuidle: using governor menu
- [ 0.248649] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.248661] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.267039] cam500b-avdd: supplied by vcc3v3
- [ 0.267290] cam500b-dovdd: supplied by vcc3v3
- [ 0.267511] cam500b-dvdd: supplied by vcc3v3
- [ 0.267777] gpio-regulator gpio-regulator: could not find pctldev for node /soc/pinctrl@01f02c00/regulator_pins@0, deferring probe
- [ 0.268230] SCSI subsystem initialized
- [ 0.268646] usbcore: registered new interface driver usbfs
- [ 0.268701] usbcore: registered new interface driver hub
- [ 0.268786] usbcore: registered new device driver usb
- [ 0.268963] media: Linux media interface: v0.10
- [ 0.268996] Linux video capture interface: v2.00
- [ 0.269095] pps_core: LinuxPPS API ver. 1 registered
- [ 0.269103] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.269127] PTP clock support registered
- [ 0.269298] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.270841] clocksource: Switched to clocksource arch_sys_counter
- [ 0.271017] VFS: Disk quotas dquot_6.6.0
- [ 0.271086] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.271238] FS-Cache: Loaded
- [ 0.278180] NET: Registered protocol family 2
- [ 0.278913] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.278968] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.279031] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.279145] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.279187] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.279384] NET: Registered protocol family 1
- [ 0.279854] RPC: Registered named UNIX socket transport module.
- [ 0.279864] RPC: Registered udp transport module.
- [ 0.279870] RPC: Registered tcp transport module.
- [ 0.279875] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.280094] Unpacking initramfs...
- [ 0.433244] Initramfs unpacking failed: junk in compressed archive
- [ 0.438212] Freeing initrd memory: 5120K
- [ 0.438569] kvm [1]: 8-bit VMID
- [ 0.439254] kvm [1]: vgic interrupt IRQ16
- [ 0.439354] kvm [1]: Hyp mode initialized successfully
- [ 0.442166] workingset: timestamp_bits=14 max_order=17 bucket_order=3
- [ 0.446727] zbud: loaded
- [ 0.448201] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.448723] NFS: Registering the id_resolver key type
- [ 0.448763] Key type id_resolver registered
- [ 0.448770] Key type id_legacy registered
- [ 0.448785] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.448800] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.449631] fuse init (API version 7.26)
- [ 0.454578] async_tx: api initialized (async)
- [ 0.454705] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 0.454848] io scheduler noop registered (default)
- [ 0.454857] io scheduler deadline registered
- [ 0.455117] io scheduler cfq registered
- [ 0.455127] io scheduler mq-deadline registered
- [ 0.455251] io scheduler bfq registered
- [ 0.455998] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO, pinctrl may not init
- [ 0.459858] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 0.461445] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
- [ 0.466888] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 0.468761] console [ttyS0] disabled
- [ 0.488972] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 45, base_baud = 1500000) is a U6_16550A
- [ 1.275489] console [ttyS0] enabled
- [ 1.301792] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 46, base_baud = 1500000) is a U6_16550A
- [ 1.333412] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 47, base_baud = 1500000) is a U6_16550A
- [ 1.362992] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 48, base_baud = 1500000) is a U6_16550A
- [ 1.374269] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.380909] [drm] No driver support for vblank timestamp query.
- [ 1.396267] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc0c51644)
- [ 1.403368] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
- [ 1.411211] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0c50348)
- [ 1.540939] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
- [ 1.550815] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
- [ 1.558540] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc0c519c4)
- [ 1.565396] [drm] Cannot find any crtc or sizes - going 1920x1080
- [ 1.612772] Console: switching to colour frame buffer device 240x67
- [ 1.643652] sun4i-drm display-engine: fb0: frame buffer device
- [ 1.650035] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
- [ 1.666832] loop: module loaded
- [ 1.688099] libphy: Fixed MDIO Bus: probed
- [ 1.692251] tun: Universal TUN/TAP device driver, 1.6
- [ 1.697484] CAN device driver interface
- [ 1.701974] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.708509] ehci-platform: EHCI generic platform driver
- [ 1.713945] ehci-platform 1c1a000.usb: EHCI Host Controller
- [ 1.719551] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
- [ 1.727716] ehci-platform 1c1a000.usb: irq 30, io mem 0x01c1a000
- [ 1.745859] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
- [ 1.752146] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.758947] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.766172] usb usb1: Product: EHCI Host Controller
- [ 1.771056] usb usb1: Manufacturer: Linux 4.14.52 ehci_hcd
- [ 1.776545] usb usb1: SerialNumber: 1c1a000.usb
- [ 1.781624] hub 1-0:1.0: USB hub found
- [ 1.785402] hub 1-0:1.0: 1 port detected
- [ 1.790022] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.796285] ohci-platform: OHCI generic platform driver
- [ 1.801731] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
- [ 1.808383] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
- [ 1.816341] ohci-platform 1c1a400.usb: irq 31, io mem 0x01c1a400
- [ 1.885018] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.891823] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.899052] usb usb2: Product: Generic Platform OHCI controller
- [ 1.904976] usb usb2: Manufacturer: Linux 4.14.52 ohci_hcd
- [ 1.910467] usb usb2: SerialNumber: 1c1a400.usb
- [ 1.917871] hub 2-0:1.0: USB hub found
- [ 1.921665] hub 2-0:1.0: 1 port detected
- [ 1.926338] usbcore: registered new interface driver cdc_acm
- [ 1.932011] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 1.940071] usbcore: registered new interface driver usblp
- [ 1.945596] usbcore: registered new interface driver cdc_wdm
- [ 1.951331] usbcore: registered new interface driver usb-storage
- [ 1.957419] usbcore: registered new interface driver usbserial
- [ 1.963293] usbcore: registered new interface driver usbserial_generic
- [ 1.969850] usbserial: USB Serial support registered for generic
- [ 1.976706] mousedev: PS/2 mouse device common for all mice
- [ 1.982797] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
- [ 1.989597] sun6i-rtc 1f00000.rtc: RTC enabled
- [ 1.994120] i2c /dev entries driver
- [ 2.032137] ov5640 2-003c: ov5640_check_chip_id: failed to read chip identifier
- [ 2.039874] lirc_dev: IR Remote Control driver registered, major 244
- [ 2.046267] IR NEC protocol handler initialized
- [ 2.050791] IR RC5(x/sz) protocol handler initialized
- [ 2.055845] IR RC6 protocol handler initialized
- [ 2.060367] IR JVC protocol handler initialized
- [ 2.064904] IR Sony protocol handler initialized
- [ 2.069522] IR SANYO protocol handler initialized
- [ 2.074228] IR Sharp protocol handler initialized
- [ 2.078932] IR MCE Keyboard/mouse protocol handler initialized
- [ 2.084765] IR LIRC bridge handler initialized
- [ 2.089210] IR XMP protocol handler initialized
- [ 2.095403] thermal thermal_zone0: failed to read out thermal zone (-16)
- [ 2.102650] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- [ 2.111011] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
- [ 2.121328] sunxi-mmc 1c0f000.mmc: Got CD GPIO
- [ 2.165905] sunxi-mmc 1c0f000.mmc: base:0xe0873000 irq:26
- [ 2.172272] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
- [ 2.206315] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 2.214429] mmc0: new SDHC card at address 0001
- [ 2.219415] mmcblk0: mmc0:0001 00000 14.6 GiB
- [ 2.225749] mmcblk0: p1 p2
- [ 2.425891] sunxi-mmc 1c10000.mmc: base:0xe0875000 irq:27
- [ 2.445684] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 2.452683] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 2.459674] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 2.467861] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 2.471202] sunxi-mmc 1c11000.mmc: base:0xe0981000 irq:28
- [ 2.478813] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.482063] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
- [ 2.490516] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.496070] usbcore: registered new interface driver usbhid
- [ 2.501651] usbhid: USB HID core driver
- [ 2.519356] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
- [ 2.520525] random: fast init done
- [ 2.532883] wireguard: WireGuard 0.0.20171111 loaded. See www.wireguard.com for information.
- [ 2.541339] wireguard: Copyright (C) 2015-2017 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- [ 2.545699] mmc1: new DDR MMC card at address 0001
- [ 2.546251] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
- [ 2.546449] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
- [ 2.546621] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
- [ 2.547552] mmcblk1: p1 p2
- [ 2.565578] mmc2: new high speed SDIO card at address 0001
- [ 2.580472] Initializing XFRM netlink socket
- [ 2.585235] NET: Registered protocol family 10
- [ 2.609603] Segment Routing with IPv6
- [ 2.613405] NET: Registered protocol family 17
- [ 2.617956] NET: Registered protocol family 15
- [ 2.622422] can: controller area network core (rev 20170425 abi 9)
- [ 2.628755] NET: Registered protocol family 29
- [ 2.633215] can: raw protocol (rev 20170425)
- [ 2.637495] can: broadcast manager protocol (rev 20170425 t)
- [ 2.643165] can: netlink gateway (rev 20170425) max_hops=1
- [ 2.649498] rfkill_gpio rfkill_bt: sunxi-bt device registered.
- [ 2.655526] Key type dns_resolver registered
- [ 2.660237] Registering SWP/SWPB emulation handler
- [ 2.666386] registered taskstats version 1
- [ 2.679662] Key type encrypted registered
- [ 2.691300] ehci-platform 1c1b000.usb: EHCI Host Controller
- [ 2.696945] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
- [ 2.705229] ehci-platform 1c1b000.usb: irq 32, io mem 0x01c1b000
- [ 2.725856] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
- [ 2.732151] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.738953] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.746181] usb usb3: Product: EHCI Host Controller
- [ 2.751065] usb usb3: Manufacturer: Linux 4.14.52 ehci_hcd
- [ 2.756552] usb usb3: SerialNumber: 1c1b000.usb
- [ 2.761716] hub 3-0:1.0: USB hub found
- [ 2.765513] hub 3-0:1.0: 1 port detected
- [ 2.770167] ehci-platform 1c1c000.usb: EHCI Host Controller
- [ 2.775781] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
- [ 2.783884] ehci-platform 1c1c000.usb: irq 34, io mem 0x01c1c000
- [ 2.800855] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
- [ 2.807105] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.813903] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.821124] usb usb4: Product: EHCI Host Controller
- [ 2.826007] usb usb4: Manufacturer: Linux 4.14.52 ehci_hcd
- [ 2.831497] usb usb4: SerialNumber: 1c1c000.usb
- [ 2.836500] hub 4-0:1.0: USB hub found
- [ 2.840274] hub 4-0:1.0: 1 port detected
- [ 2.844851] ehci-platform 1c1d000.usb: EHCI Host Controller
- [ 2.850461] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5
- [ 2.858501] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
- [ 2.875850] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
- [ 2.882095] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.888892] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.896118] usb usb5: Product: EHCI Host Controller
- [ 2.901001] usb usb5: Manufacturer: Linux 4.14.52 ehci_hcd
- [ 2.906491] usb usb5: SerialNumber: 1c1d000.usb
- [ 2.911476] hub 5-0:1.0: USB hub found
- [ 2.915246] hub 5-0:1.0: 1 port detected
- [ 2.919805] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
- [ 2.926459] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
- [ 2.934457] ohci-platform 1c1b400.usb: irq 33, io mem 0x01c1b400
- [ 3.000012] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.006813] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.014038] usb usb6: Product: Generic Platform OHCI controller
- [ 3.019962] usb usb6: Manufacturer: Linux 4.14.52 ohci_hcd
- [ 3.025455] usb usb6: SerialNumber: 1c1b400.usb
- [ 3.030756] hub 6-0:1.0: USB hub found
- [ 3.034550] hub 6-0:1.0: 1 port detected
- [ 3.039103] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
- [ 3.045754] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
- [ 3.053753] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
- [ 3.119998] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.126798] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.134022] usb usb7: Product: Generic Platform OHCI controller
- [ 3.139945] usb usb7: Manufacturer: Linux 4.14.52 ohci_hcd
- [ 3.145436] usb usb7: SerialNumber: 1c1c400.usb
- [ 3.150437] hub 7-0:1.0: USB hub found
- [ 3.154233] hub 7-0:1.0: 1 port detected
- [ 3.158789] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
- [ 3.165441] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
- [ 3.173442] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
- [ 3.240002] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.246804] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.254029] usb usb8: Product: Generic Platform OHCI controller
- [ 3.259951] usb usb8: Manufacturer: Linux 4.14.52 ohci_hcd
- [ 3.265442] usb usb8: SerialNumber: 1c1d400.usb
- [ 3.270449] hub 8-0:1.0: USB hub found
- [ 3.274253] hub 8-0:1.0: 1 port detected
- [ 3.278860] usb_phy_generic usb_phy_generic.3.auto: usb_phy_generic.3.auto supply vcc not found, using dummy regulator
- [ 3.289979] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver
- [ 3.295755] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 9
- [ 3.303734] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.310538] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.317765] usb usb9: Product: MUSB HDRC host driver
- [ 3.322734] usb usb9: Manufacturer: Linux 4.14.52 musb-hcd
- [ 3.328223] usb usb9: SerialNumber: musb-hdrc.4.auto
- [ 3.333624] hub 9-0:1.0: USB hub found
- [ 3.337417] hub 9-0:1.0: 1 port detected
- [ 3.344598] asoc-simple-card soc:sound: i2s-hifi <-> 1c22800.i2s mapping ok
- [ 3.353888] input: r_gpio_keys as /devices/platform/r_gpio_keys/input/input0
- [ 3.361933] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:39:05 UTC (2345)
- [ 3.375793] vcc3v0: disabling
- [ 3.378781] vcc5v0: disabling
- [ 3.381758] cam500b-avdd: disabling
- [ 3.385242] cam500b-dovdd: disabling
- [ 3.388822] cam500b-dvdd: disabling
- [ 3.392341] usb0-vbus: disabling
- [ 3.395567] ALSA device list:
- [ 3.398548] #0: Dummy 1
- [ 3.401178] #1: Loopback 1
- [ 3.404055] #2: H3 Audio Codec
- [ 3.407294] #3: allwinner,hdmi
- [ 3.412939] Freeing unused kernel memory: 2048K
- Loading, please wait...
- starting version 225
- [ 3.544617] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 3.550433] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 3.552689] random: udevadm: uninitialized urandom read (16 bytes read)
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Begin: Will now check root file system ... fsck from util-linux 2.26.2
- [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p2] fsck.ext4 -y /dev/mmcblk0p2
- e2fsck 1.42.12 (29-Aug-2014)
- rootfs: clean, 13914/936000 files, 569910/3823616 blocks (check in 2 mounts)
- done.
- [ 4.337090] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.375686] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- [ 5.251986] systemd[1]: System time before build time, advancing clock.
- [ 5.398523] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.440827] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
- [ 5.459680] systemd[1]: Detected architecture arm.
- Welcome to Debian GNU/Linux 9 (stretch)!
- [ 5.483686] systemd[1]: Set hostname to <DietPi>.
- [ 6.093085] systemd[1]: apt-daily.timer: Cannot add dependency job, ignoring: Unit apt-daily.timer is masked.
- [ 6.103104] systemd[1]: apt-daily-upgrade.timer: Cannot add dependency job, ignoring: Unit apt-daily-upgrade.timer is masked.
- [ 6.114561] systemd[1]: systemd-logind.service: Cannot add dependency job, ignoring: Unit systemd-logind.service is masked.
- [ 6.126094] systemd[1]: getty-static.service: Cannot add dependency job, ignoring: Unit getty-static.service is masked.
- [ 6.149792] systemd[1]: Set up automount mnt-FB41\x2d7D7D.automount.
- [ OK ] Set up automount mnt-FB41\x2d7D7D.automount.
- [ 6.177335] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ 6.194061] systemd[1]: Reached target Remote File Systems.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Listening on Journal Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Created slice System Slice.
- Starting Load Kernel Modules...
- [ OK ] Created slice system-getty.slice.
- Mounting POSIX Message Queue File System...
- [ 6.438561] Mass Storage Function, version: 2009/09/11
- [ 6.444182] LUN: removable file: (no medium)
- [ 6.444433] LUN: file: /dev/mmcblk0p1
- [ 6.444442] Number of LUNs=1
- [ 6.444602] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
- [ 6.444615] g_mass_storage gadget: userspace failed to provide iSerialNumber
- [ 6.444623] g_mass_storage gadget: g_mass_storage ready
- Starting Journal Service...
- Starting Nameserver information manager...
- Starting Remount Root and Kernel File Systems...
- Starting Create list of required st…ce nodes for the current kernel...
- [ 6.566980] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- Mounting Debug File System...
- Starting Set the console keyboard layout...
- [ OK ] Listening on udev Control Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Reached target Encrypted Volumes.
- [ OK ] Reached target Paths.
- [ OK ] Reached target Slices.
- Starting Restore / save the current clock...
- [ OK ] Mounted Debug File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Journal Service.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Create list of required sta…vice nodes for the current kernel.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started Nameserver information manager.
- Starting Create Static Device Nodes in /dev...
- Activating swap /var/swap...
- Starting Load/Save Random Seed...
- Starting udev Coldplug all Devices...
- Mounting Configuration File System...
- Starting Apply Kernel Variables...
- Mounting FUSE Control File System...
- [ OK ] Mounted Configuration File System.
- [ OK ] Mounted FUSE Control File System.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Apply Kernel Variables.
- [ 7.257310] Adding 1594364k swap on /var/swap. Priority:-2 extents:14 across:1700860k SS
- [ OK ] Activated swap /var/swap.
- [ OK ] Reached target Swap.
- [ OK ] Started Create Static Device Nodes in /dev.
- Starting udev Kernel Device Manager...
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Reached target Sound Card.
- [ OK ] Found device /dev/ttyS2.
- [ OK ] Found device /dev/ttyS1.
- [ OK ] Found device /dev/ttyS0.
- [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- Starting Load/Save RF Kill Switch Status...
- [ 8.229057] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430a1-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
- [ OK ] Found device /dev/disk/by-uuid/BFA8-4325.
- [ OK ] Started Load/Save RF Kill Switch Status.
- [ 8.388368] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 8 2016 15:31:47 version 7.46.57.4.ap.r4 (A1 Station/P2P) FWID 01-3621395e es6.c5.n4.a3
- [ OK ] Found device /sys/subsystem/net/devices/wlan0.
- [ 10.055935] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
- [ 10.062818] rtc-ds1307: probe of 0-0068 failed with error -110
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Reached target Local File Systems (Pre).
- Mounting /tmp...
- Mounting /DietPi...
- Mounting /var/log...
- Mounting /boot...
- [ OK ] Mounted /tmp.
- [ OK ] Mounted /DietPi.
- [ OK ] Mounted /var/log.
- [ 13.890486] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ OK ] Mounted /boot.
- Starting Flush Journal to Persistent Storage...
- [ OK ] Reached target Local File Systems.
- [ OK ] Started ifup for wlan0.
- Starting Set console font and keymap...
- [ 14.020107] systemd-journald[236]: Received request to flush runtime journal from PID 1
- [ OK ] Started Flush Journal to Persistent Storage.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Reached target Timers.
- [ OK ] Reached target Basic System.
- Starting LSB: clean_ip_info...
- Starting DietPi-RAMlog...
- Starting LSB: clean_ip_info...
- Starting DietPi-RAMdisk...
- Starting LSB: RPi-Monitor sunxi-temp helper...
- Starting brcm_patchram_plus...
- Starting LSB: Lightweight SSH server...
- [ OK ] Started LSB: clean_ip_info.
- Starting Load/Save RF Kill Switch Status...
- [ OK ] Started LSB: clean_ip_info.
- [ 14.645464] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ OK ] Started LSB: RPi-Monitor sunxi-temp helper.
- [ OK ] Started LSB: Lightweight SSH server.
- [ OK ] Started DietPi-RAMlog.
- [ OK ] Started Load/Save RF Kill Switch Status.
- [ OK ] Started DietPi-RAMdisk.
- Starting DietPi-PreBoot...
- [ OK ] Root access verified.
- [ OK ] Root access verified.
- [ 16.008693] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ SUB1 ] DietPi-CPU_set > Applying CPU gov
- [ INFO ] DietPi-CPU_set | Setting CPU freq: Max = Disabled MHz | Min = Disabled
- [ SUB1 ] DietPi-LED_Control > Applying LED triggers
- [ OK ] DietPi-LED_Control | nanopi:blue:status: heartbeat
- [ OK ] DietPi-LED_Control | nanopi:green:pwr: none
- [ INFO ] DietPi-CPU_set | Setting up_threshold: 50 %
- [ INFO ] DietPi-CPU_set | Setting sampling_rate: 25000 microseconds
- [ INFO ] DietPi-CPU_set | Setting sampling_down_factor: 80
- [ OK ] DietPi-CPU_set | CPU gov applied: ondemand
- [ OK ] Started DietPi-PreBoot.
- Starting Raise network interfaces...
- [ OK ] Started Raise network interfaces.
- [ OK ] Reached target Network.
- Starting Permit User Sessions...
- [ OK ] Started Disable WiFi power management.
- Starting DietPi-Boot...
- [ OK ] Started Permit User Sessions.
- [ INFO ] DietPi-Boot | Mon 5 Mar 18:06:54 GMT 2018 | Waiting for valid connection, before continuing boot | Mode=1
- [ INFO ] DietPi-Boot | Mon 5 Mar 18:06:55 GMT 2018 | Waiting for valid connection, before continuing boot | Mode=1
- [ INFO ] DietPi-Boot | Mon 5 Mar 18:06:56 GMT 2018 | Waiting for valid connection, before continuing boot | Mode=1
- [FAILED] Failed to start Set console font and keymap.
- See 'systemctl status console-setup.service' for details.
- [ OK ] DietPi-Boot | Mon 5 Mar 18:06:57 GMT 2018 | Valid connection found.
- Mounting /mnt/FB41-7D7D...
- [ 20.873858] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ OK ] Mounted /mnt/FB41-7D7D.
- mount: /dev/mmcblk1p1 is already mounted or /mnt/FB41-7D7D busy
- [ OK ] Started DietPi-Boot.
- [ OK ] Started DietPi-PostBoot.
- [ OK ] Started rc.local backwards compatibility.
- [ OK ] Started Serial Getty on ttyS1.
- [ OK ] Started Serial Getty on ttyS0.
- [ OK ] Started Getty on tty1.
- [ OK ] Started Serial Getty on ttyS2.
- Running user script: /var/lib/dietpi/postboot.d/*
- chmod: cannot access '/var/lib/dietpi/postboot.d/*': No such file or directory
- /DietPi/dietpi/postboot: line 14: /var/lib/dietpi/postboot.d/*: No such file or directory
- ───────────────────────────────────────
- DietPi | 18:07 | Mon 05/03/18
- ───────────────────────────────────────
- v6.16 | NanoPi Neo (armv7l)
- ───────────────────────────────────────
- wlan0 | 192.168.0.103
- ───────────────────────────────────────
- Default Login:
- Username = root
- Password = dietpi
- Please login to continue
- openmediavault 3.0.76 (Erasmus) DietPi ttyS0
- Copyright (C) 2009-2017 by Volker Theile. All rights reserved.
- To manage the system visit the openmediavault web control panel:
- eth0: 192.168.0.30
- By default the web control panel administrator account has the
- username 'admin' and password 'openmediavault'.
- It is recommended that you change the password for this account
- within the web control panel or using the 'omv-firstaid' CLI
- command.
- For more information regarding this appliance, please visit the
- web site: http://www.openmediavault.org
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement