Guest User

CE dmesg

a guest
Oct 25th, 2021
44
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 74.60 KB | None | 0 0
  1.  
  2. CoreELEC:~ # dmesg
  3. [ 0.000000@0] Booting Linux on physical CPU 0x0
  4. [ 0.000000@0] Linux version 4.9.113 (portisch@ubuntu) (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) ) #1 SMP PREEMPT Fri Oct 8 19:43:27 CEST 2021
  5. [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
  6. [ 0.000000@0] CoreELEC dt-id: gxl_p212_1g
  7. [ 0.000000@0] Machine model: Amlogic
  8. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
  9. [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
  10. [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
  11. [ 0.000000@0] 3e000000 - 40000000, 32768 KB, linux,di_cma
  12. [ 0.000000@0] 3d800000 - 3e000000, 8192 KB, linux,meson-fb
  13. [ 0.000000@0] Reserved memory: created DMA memory pool at 0x000000003d800000, size 0 MiB
  14. [ 0.000000@0] 3d800000 - 3d800000, 0 KB, linux,ppmgr
  15. [ 0.000000@0] 26400000 - 33400000, 212992 KB, linux,codec_mm_cma
  16. [ 0.000000@0] 3d800000 - 3d800000, 0 KB, linux,codec_mm_reserved
  17. [ 0.000000@0] 3c800000 - 3d800000, 16384 KB, linux,vdin1_cma
  18. [ 0.000000@0] 37c00000 - 3c800000, 77824 KB, linux,ion-dev
  19. [ 0.000000@0] cma: Reserved 8 MiB at 0x0000000037400000
  20. [ 0.000000@0] On node 0 totalpages: 261888
  21. [ 0.000000@0] DMA zone: 4092 pages used for memmap
  22. [ 0.000000@0] DMA zone: 0 pages reserved
  23. [ 0.000000@0] DMA zone: 261888 pages, LIFO batch:31
  24. [ 0.000000@0] psci: probing for conduit method from DT.
  25. [ 0.000000@0] psci: PSCIv0.2 detected in firmware.
  26. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
  27. [ 0.000000@0] psci: Trusted OS migration not required
  28. [ 0.000000@0] percpu: Embedded 22 pages/cpu @ffffffc037352000 s51672 r8192 d30248 u90112
  29. [ 0.000000@0] pcpu-alloc: s51672 r8192 d30248 u90112 alloc=22*4096
  30. [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  31. [ 0.000000@0] Detected VIPT I-cache on CPU0
  32. [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
  33. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257796
  34. [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=enforcing logo=osd1,loaded,0x3d800000,576cvbs maxcpus=4 vout=576cvbs,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apee androidboot.hardware=amlogic BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=ttyS0,115200 console=tty0 no_console_suspend keymap=us hdmimode=1080p60hz logo=osd0,loaded,0x3d800000 frac_rate_policy=0 native_4k_gui=0 hdr_policy=1 ssh nosplash systemd.show_status=auto
  35. [ 0.000000@0] fb: osd1
  36. [ 0.000000@0] fb: loaded
  37. [ 0.000000@0] fb: 0x3d800000
  38. [ 0.000000@0] fb: 576cvbs
  39. [ 0.000000@0] vout: 576cvbs
  40. [ 0.000000@0] vout: enable: 1
  41. [ 0.000000@0] vout: get hdmimode: 1080p60hz
  42. [ 0.000000@0] vout: get cvbsmode: 576cvbs
  43. [ 0.000000@0] vout: get hdmimode: 1080p60hz
  44. [ 0.000000@0] fb: osd0
  45. [ 0.000000@0] fb: loaded
  46. [ 0.000000@0] fb: 0x3d800000
  47. [ 0.000000@0] am_vecm: boot hdr_policy: 1
  48. [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  49. [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  50. [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  51. [ 0.000000@0] Memory: 629784K/1047552K available (12798K kernel code, 1912K rwdata, 9280K rodata, 4864K init, 1494K bss, 57320K reserved, 360448K cma-reserved)
  52. [ 0.000000@0] Virtual kernel memory layout:
  53. [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  54. [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
  55. [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009d00000 ( 12800 KB)
  56. [ 0.000000@0] .rodata : 0xffffff8009d00000 - 0xffffff800a620000 ( 9344 KB)
  57. [ 0.000000@0] .init : 0xffffff800a620000 - 0xffffff800aae0000 ( 4864 KB)
  58. [ 0.000000@0] .data : 0xffffff800aae0000 - 0xffffff800acbe008 ( 1913 KB)
  59. [ 0.000000@0] .bss : 0xffffff800acbe008 - 0xffffff800ae33bc4 ( 1495 KB)
  60. [ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
  61. [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
  62. [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
  63. [ 0.000000@0] 0xffffffbf00004000 - 0xffffffbf01000000 ( 15 MB actual)
  64. [ 0.000000@0] memory : 0xffffffc000100000 - 0xffffffc040000000 ( 1023 MB)
  65. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  66. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  67. [ 0.000000@0] Build-time adjustment of leaf fanout to 64.
  68. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  69. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  70. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
  71. [ 0.000000@0] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
  72. [ 0.000000@0] amlogic_init_sdemmc: register amlogic sdemmc clk
  73. [ 0.000000@0] amlogic_init_sdemmc: register amlogic sdemmc clk
  74. [ 0.000000@0] amlogic_init_gpu: register meson gpu clk
  75. [ 0.000000@0] amlogic_init_media: register meson media clk
  76. [ 0.000000@0] amlogic_init_misc: register meson misc clk
  77. [ 0.000000@0] gxl_clkc_init initialization complete
  78. [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
  79. [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  80. [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  81. [ 0.000041@0] meson_bc_timer: mclk->mux_reg =ffffff8008008990,mclk->reg =ffffff800800a994
  82. [ 0.000461@0] Console: colour dummy device 80x25
  83. [ 0.001780@0] console [tty0] enabled
  84. [ 0.001809@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  85. [ 0.001845@0] pid_max: default: 32768 minimum: 301
  86. [ 0.001947@0] Security Framework initialized
  87. [ 0.001969@0] SELinux: Initializing.
  88. [ 0.002019@0] SELinux: Starting in permissive mode
  89. [ 0.002048@0] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  90. [ 0.002071@0] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  91. [ 0.002685@0] ftrace: allocating 41195 entries in 161 pages
  92. [ 0.068425@0] sched-energy: CPU device node has no sched-energy-costs
  93. [ 0.068459@0] CPU0: update cpu_capacity 1024
  94. [ 0.068486@0] ASID allocator initialised with 65536 entries
  95. [ 0.108436@0] secmon: can't fine clear_range
  96. [ 0.109115@0] Meson chip version = RevA (21:A - 82:0)
  97. [ 0.156559@1] Detected VIPT I-cache on CPU1
  98. [ 0.156614@1] CPU1: update cpu_capacity 1024
  99. [ 0.156617@1] CPU1: Booted secondary processor [410fd034]
  100. [ 0.188608@2] Detected VIPT I-cache on CPU2
  101. [ 0.188652@2] CPU2: update cpu_capacity 1024
  102. [ 0.188655@2] CPU2: Booted secondary processor [410fd034]
  103. [ 0.220677@3] Detected VIPT I-cache on CPU3
  104. [ 0.220719@3] CPU3: update cpu_capacity 1024
  105. [ 0.220721@3] CPU3: Booted secondary processor [410fd034]
  106. [ 0.220805@0] Brought up 4 CPUs
  107. [ 0.220962@0] SMP: Total of 4 processors activated.
  108. [ 0.220982@0] CPU features: detected feature: 32-bit EL0 Support
  109. [ 0.221068@0] CPU: All CPU(s) started at EL2
  110. [ 0.221105@0] alternatives: patching kernel code
  111. [ 0.221974@0] devtmpfs: initialized
  112. [ 0.233562@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  113. [ 0.233615@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  114. [ 0.233791@0] pinctrl core: initialized pinctrl subsystem
  115. [ 0.234610@0] NET: Registered protocol family 16
  116. [ 0.235424@0] schedtune: init normalization constants...
  117. [ 0.235449@0] schedtune: no energy model data
  118. [ 0.235465@0] schedtune: disabled!
  119. [ 0.248717@0] cpuidle: using governor menu
  120. [ 0.248845@0] register canvas platform driver
  121. [ 0.248884@0] register rdma platform driver
  122. [ 0.249661@0] vdso: 2 pages (1 code @ ffffff8009d07000, 1 data @ ffffff800aae5000)
  123. [ 0.249700@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  124. [ 0.250915@1] DMA: preallocated 2048 KiB pool for atomic allocations
  125. [ 0.251119@1] clkmsr: clkmsr: driver init
  126. [ 0.251142@1] codec_mm_module_init
  127. [ 0.251181@1] media_configs_system_init
  128. [ 0.252365@1] pstore: using zlib compression
  129. [ 0.252799@1] console [pstore-1] enabled
  130. [ 0.252818@1] pstore: Registered ramoops as persistent store backend
  131. [ 0.252838@1] ramoops: attached 0x100000@0x7400000, ecc: 0/0
  132. [ 0.254584@1] aml_iomap: amlogic iomap probe done
  133. [ 0.255849@1] vpu: driver version: v20190329(2-gxl)
  134. [ 0.255886@1] vpu: load vpu_clk: 666666667Hz(7)
  135. [ 0.256049@1] vpu: clktree_init
  136. [ 0.256130@1] vpu: vpu_probe OK
  137. [ 0.258839@1] clkmsr: msr_clk_reg0=ffffff800834175c,msr_clk_reg2=ffffff8008343764
  138. [ 0.258893@1] clkmsr c110875c.meson_clk_msr: failed to get msr ring reg0
  139. [ 0.259861@1] aml_vdac_config_probe: cpu_id:0, name:meson-gx_l_m-vdac
  140. [ 0.260065@1] aml_vdac_probe: ok
  141. [ 0.263836@1] cvbs_out: cvbsout_probe, cpu_id:0,name:meson-gxl-cvbsout
  142. [ 0.263971@1] cvbs_out: find performance_pal config
  143. [ 0.263999@1] vout: vout1: register server: cvbs_vout_server
  144. [ 0.264019@1] cvbs_out: register cvbs module server ok
  145. [ 0.264038@1] vout: vout2: register server: cvbs_vout2_server
  146. [ 0.264058@1] cvbs_out: register cvbs module vout2 server ok
  147. [ 0.264079@1] cvbs_out: chrdev devno 264241152 for disp
  148. [ 0.264296@1] cvbs_out: create cdev cvbs
  149. [ 0.264324@1] cvbs_out: cvbsout_probe OK
  150. [ 0.265236@1] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  151. [ 0.265356@1] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  152. [ 0.265389@1] codec_mm_probe ok
  153. [ 0.265609@1] canvas_probe reg=00000000c8838000,size=400
  154. [ 0.265650@1] canvas maped reg_base =ffffff800834b000
  155. [ 0.271808@1] rdma_probe,cpu_type:1, ver:0, len:8
  156. [ 0.271847@1] vpu: switch_vpu_mem_pd: unsupport vpu mod: 57
  157. [ 0.272151@1] rdma_register, rdma_table_addr ffffff8008361000 rdma_table_addr_phy 37600000 reg_buf ffffffc0358d8000
  158. [ 0.272195@1] rdma_register success, handle 1 table_size 32768
  159. [ 0.272215@1] set_rdma_handle video rdma handle = 1.
  160. [ 0.272277@1] classs created ok
  161. [ 0.272302@1] classs file created ok
  162. [ 0.451719@1] SCSI subsystem initialized
  163. [ 0.451941@1] libata version 3.00 loaded.
  164. [ 0.452208@1] usbcore: registered new interface driver usbfs
  165. [ 0.452306@1] usbcore: registered new interface driver hub
  166. [ 0.452404@1] usbcore: registered new device driver usb
  167. [ 0.452569@1] pps_core: LinuxPPS API ver. 1 registered
  168. [ 0.452599@1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  169. [ 0.452654@1] PTP clock support registered
  170. [ 0.453202@1] secmon: reserve_mem_size:0x300000
  171. [ 0.453300@1] secmon secmon: assigned reserved memory node linux,secmon
  172. [ 0.453518@1] secmon: get page:ffffffbf00140000, 5000
  173. [ 0.453544@1] secmon: share in base: 0xffffffc0100fe000, share out base: 0xffffffc0100ff000
  174. [ 0.453575@1] secmon: phy_in_base: 0x100fe000, phy_out_base: 0x100ff000
  175. [ 0.454153@1] hdmitx: system: Ver: 20190815
  176. [ 0.454273@1] hdmitx: system: hdmitx_device.drm_feature : 0
  177. [ 0.454313@1] hdmitx: system: hpd irq = 33
  178. [ 0.454947@1] hdmitx: hdmitx20: Mapped PHY: 0xc1109800
  179. [ 0.454989@1] hdmitx: hdmitx20: Mapped PHY: 0xc8834400
  180. [ 0.455012@1] hdmitx: hdmitx20: Mapped PHY: 0xd0100000
  181. [ 0.455046@1] hdmitx: hdmitx20: Mapped PHY: 0xc8100000
  182. [ 0.455067@1] hdmitx: hdmitx20: Mapped PHY: 0xc883c000
  183. [ 0.455088@1] hdmitx: hdmitx20: Mapped PHY: 0xc1104400
  184. [ 0.455108@1] hdmitx: hdmitx20: Mapped PHY: 0xc883a000
  185. [ 0.455127@1] hdmitx: hdmitx20: Mapped PHY: 0xda83a000
  186. [ 0.455147@1] hdmitx: hdmitx20: Mapped PHY: 0xd0044000
  187. [ 0.455172@1] hdmitx: hw: hdmitx_get_format:0x0
  188. [ 0.455190@1] hdmitx: hw: P_HHI_HDMI_CLK_CNTL :0x100
  189. [ 0.455209@1] hdmitx: hw: P_HHI_HDMI_PLL_CNTL :0xc000027b
  190. [ 0.455477@1] hdmitx: hw: avmute set to 1
  191. [ 0.455514@1] vout: vout1: register server: hdmitx_vout_server
  192. [ 0.455535@1] vout: vout2: register server: hdmitx_vout2_server
  193. [ 0.456932@1] vout: create vout attribute OK
  194. [ 0.457136@1] vout: vout_fops_create OK
  195. [ 0.457163@1] vout: vout1: register server: nulldisp_vout_server
  196. [ 0.457272@1] vout: tvout monitor interval:500(ms), timeout cnt:20
  197. [ 0.457327@1] cvbs_out: mode is 1,sync_duration_den=1,sync_duration_num=50
  198. [ 0.457368@1]
  199. [ 0.457368@1] vdac_enable: 1, module_sel:0x8, private_flag:0x0
  200. [ 0.457403@1] cvbs_out: cvbs_cntl_output: 1: 0xb0001, 0x0
  201. [ 0.457421@1] cvbs_out: already display in uboot
  202. [ 0.457438@1] vout: init mode 576cvbs set ok
  203. [ 0.457456@1] vout: aml_tvout_mode_monitor
  204. [ 0.457481@1] vout: refresh_tvout_mode: mode chang to 1080p60hz
  205. [ 0.457501@1] vout: vmode set to 1080p60hz
  206. [ 0.457518@1] vout: don't set the same mode as current, exit
  207. [ 0.457542@1] vout: aml_vout_probe OK
  208. [ 0.458260@1] chip type:0x21
  209. [ 0.458803@1] MEMORY:[100000+3ff00000]
  210. [ 0.458844@1] ramdump_probe, storage device:data
  211. [ 0.458863@1] NO valid ramdump args:0 0
  212. [ 0.458898@1] ramdump_probe, set sticky to 8400
  213. [ 0.459178@1] Advanced Linux Sound Architecture Driver Initialized.
  214. [ 0.460133@1] NetLabel: Initializing
  215. [ 0.460169@1] NetLabel: domain hash size = 128
  216. [ 0.460187@1] NetLabel: protocols = UNLABELED CIPSOv4
  217. [ 0.460260@1] NetLabel: unlabeled traffic allowed by default
  218. [ 0.461344@1] clocksource: Switched to clocksource arch_sys_counter
  219. [ 0.526105@3] VFS: Disk quotas dquot_6.6.0
  220. [ 0.526244@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  221. [ 0.526450@3] FS-Cache: Loaded
  222. [ 0.540616@2] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
  223. [ 0.541106@2] NET: Registered protocol family 2
  224. [ 0.541980@2] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  225. [ 0.542094@2] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  226. [ 0.542252@2] TCP: Hash tables configured (established 8192 bind 8192)
  227. [ 0.542388@2] UDP hash table entries: 512 (order: 2, 16384 bytes)
  228. [ 0.542428@2] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  229. [ 0.542676@2] NET: Registered protocol family 1
  230. [ 0.543249@2] RPC: Registered named UNIX socket transport module.
  231. [ 0.543284@2] RPC: Registered udp transport module.
  232. [ 0.543304@2] RPC: Registered tcp transport module.
  233. [ 0.543323@2] RPC: Registered tcp NFSv4.1 backchannel transport module.
  234. [ 0.543352@2] PCI: CLS 0 bytes, default 64
  235. [ 0.545007@2] wifi: power_on_pin_OD = 0;
  236. [ 0.545064@2] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
  237. [ 0.545184@2] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
  238. [ 0.545227@2] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
  239. [ 0.545250@2] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=487
  240. [ 0.545272@2] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
  241. [ 0.545294@2] aml_wifi wifi: [wifi_dev_probe] power_on_pin=486
  242. [ 0.545315@2] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
  243. [ 0.545854@2] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
  244. [ 0.546080@2] aml_wifi wifi: [wifi_setup_dt] irq num is:(49)
  245. [ 0.546106@2] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(487)
  246. [ 0.546154@2] aml_wifi wifi: [wifi_setup_dt] power_on_pin(486)
  247. [ 0.546470@2] Unpacking initramfs...
  248. [ 0.582621@2] Freeing initrd memory: 7156K
  249. [ 0.583914@2] hw perfevents: clusterb_enabled = 0
  250. [ 0.583965@2] hw perfevents: cpumasks 0xf, 0x0
  251. [ 0.584026@2] hw perfevents: cluster A irq = 17
  252. [ 0.584153@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  253. [ 0.587474@2] audit: initializing netlink subsys (disabled)
  254. [ 0.587588@2] audit: type=2000 audit(0.540:1): initialized
  255. [ 0.588849@2] workingset: timestamp_bits=46 max_order=18 bucket_order=0
  256. [ 0.600507@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  257. [ 0.601630@0] FS-Cache: Netfs 'nfs' registered for caching
  258. [ 0.602679@0] NFS: Registering the id_resolver key type
  259. [ 0.602759@0] Key type id_resolver registered
  260. [ 0.602780@0] Key type id_legacy registered
  261. [ 0.602810@0] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  262. [ 0.603221@2] FS-Cache: Netfs 'cifs' registered for caching
  263. [ 0.604557@0] SELinux: Registering netfilter hooks
  264. [ 0.608689@2] NET: Registered protocol family 38
  265. [ 0.608752@2] Key type asymmetric registered
  266. [ 0.608775@2] Asymmetric key parser 'x509' registered
  267. [ 0.609137@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  268. [ 0.609192@2] io scheduler noop registered (default)
  269. [ 0.609217@2] io scheduler deadline registered
  270. [ 0.609527@2] io scheduler cfq registered
  271. [ 0.613007@2] random: fast init done
  272. [ 0.613103@2] random: crng init done
  273. [ 0.614030@0] [drm] Initialized
  274. [ 0.614227@0] Unable to detect cache hierarchy for CPU 0
  275. [ 0.622955@2] loop: module loaded
  276. [ 0.624364@2] mtdoops: mtd device (mtddev=name/number) must be supplied
  277. [ 0.625179@2] libphy: Fixed MDIO Bus: probed
  278. [ 0.626520@2] ee eth reset:Addr = ffffff80083e7408
  279. [ 0.626915@3] meson6-dwmac c9410000.ethernet: no reset control found
  280. [ 0.626955@3] stmmac - user ID: 0x11, Synopsys ID: 0x37
  281. [ 0.626975@3] Ring mode enabled
  282. [ 0.626995@3] DMA HW capability register supported
  283. [ 0.627006@3] Normal descriptors
  284. [ 0.627032@3] RX Checksum Offload Engine supported
  285. [ 0.627051@3] COE Type 2
  286. [ 0.627067@3] TX Checksum insertion supported
  287. [ 0.627085@3] Wake-Up On Lan supported
  288. [ 0.627165@3] Enable RX Mitigation via HW Watchdog Timer
  289. [ 0.630229@0] libphy: stmmac: probed
  290. [ 0.630285@0] eth%d: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active
  291. [ 0.632775@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  292. [ 0.632832@0] ehci-pci: EHCI PCI platform driver
  293. [ 0.632955@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  294. [ 0.633018@0] ohci-pci: OHCI PCI platform driver
  295. [ 0.633816@0] usbcore: registered new interface driver cdc_acm
  296. [ 0.633868@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  297. [ 0.634009@0] usbcore: registered new interface driver usb-storage
  298. [ 0.634198@0] usbcore: registered new interface driver usbserial
  299. [ 0.634299@0] usbcore: registered new interface driver usbserial_generic
  300. [ 0.634380@0] usbserial: USB Serial support registered for generic
  301. [ 0.635087@0] mousedev: PS/2 mouse device common for all mice
  302. [ 0.635847@0] i2c /dev entries driver
  303. [ 0.637900@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
  304. [ 0.639778@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
  305. [ 0.642352@3] ledtrig-cpu: registered to indicate activity on CPUs
  306. [ 0.643192@3] hidraw: raw HID events driver (C) Jiri Kosina
  307. [ 0.643820@2] usbcore: registered new interface driver usbhid
  308. [ 0.643864@2] usbhid: USB HID core driver
  309. [ 0.644458@2] c81004c0.serial: clock gate not found
  310. [ 0.644577@2] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80083e94c0
  311. [ 0.644655@2] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 20, base_baud = 1500000) is a meson_uart
  312. [ 0.644700@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  313. [ 0.659415@1] clear:24000000, free:24000000, tick:180889 us
  314. [ 2.315514@2] console [ttyS0] enabled
  315. [ 2.319581@2] c11084c0.serial: clock gate not found
  316. [ 2.324035@2] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80083eb4c0
  317. [ 2.331071@2] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 21, base_baud = 10416666) is a meson_uart
  318. [ 2.341514@2] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80083ed000
  319. [ 2.351221@2] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
  320. [ 2.357719@2] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80083f1080
  321. [ 2.369925@2] meson_reset c1104404.reset-controller: can't request region for resource [mem 0xc1104404-0xc1104423]
  322. [ 2.378491@2] meson_reset: probe of c1104404.reset-controller failed with error -16
  323. [ 2.386872@2] aml_dma c883e000.aml_dma: Aml dma
  324. [ 2.391848@2] aml_aes_dma c883e000.aml_dma:aml_aes: Aml AES_dma
  325. [ 2.397077@2] aml_tdes_dma c883e000.aml_dma:aml_tdes: Aml TDES_dma
  326. [ 2.403118@2] gpio-keypad gpio_keypad: power key(116) registed.
  327. [ 2.408568@2] input: gpio_keypad as /devices/platform/gpio_keypad/input/input0
  328. [ 2.416120@2] efusekeynum: 4
  329. [ 2.418446@2] efusekeyname: mac offset: 0 size: 6
  330. [ 2.424787@2] efusekeyname: mac_bt offset: 6 size: 6
  331. [ 2.431172@2] efusekeyname: mac_wifi offset: 12 size: 6
  332. [ 2.437557@2] efusekeyname: usid offset: 18 size: 16
  333. [ 2.444160@2] efuse efuse: probe OK!
  334. [ 2.449572@2] ion_dev ion_dev: assigned reserved memory node linux,ion-dev
  335. [ 2.454833@2] ge2d: ge2d_init_module
  336. [ 2.458485@2] ge2d: ge2d clock is 400 MHZ
  337. [ 2.461812@2] ge2d: register address resource is not found
  338. [ 2.467213@2] ge2d: reserved mem is not used
  339. [ 2.471484@2] ge2d: ge2d start monitor
  340. [ 2.475608@2] [tsync_pcr_init]init success.
  341. [ 2.479551@2] amvideom vsync irq: 32
  342. [ 2.482866@2] create_ge2d_work_queue video task ok
  343. [ 2.488610@2] amvideocap_probe,amvideocap
  344. [ 2.491553@2] use cma buf.
  345. [ 2.493069@0] dil:err:DI_POST_REG_RD:not attach
  346. [ 2.498946@2] fb: osd_init_module
  347. [ 2.502359@2] fb: viu vsync irq: 32
  348. [ 2.505456@2] 0x000000c3:Y=c3,U=0,V=0
  349. [ 2.509033@2] 0x000000c4:Y=c4,U=0,V=0
  350. [ 2.513004@2] fb: osd_rdma_init: rdma_table p=0x37608000,op=0x37608000 , v=0xffffff80083f5000
  351. [ 2.513131@0] dil:err:DI_POST_REG_RD:not attach
  352. [ 2.525665@2] rdma_register, rdma_table_addr ffffff80083f7000 rdma_table_addr_phy 37609000 reg_buf ffffffc035afe000
  353. [ 2.533044@0] dil:err:DI_POST_REG_RD:not attach
  354. [ 2.540442@2] rdma_register success, handle 2 table_size 4096
  355. [ 2.546128@2] fb: osd_rdma_init:osd reset rdma handle = 2.
  356. [ 2.551607@2] rdma_register, rdma_table_addr ffffff80083f9000 rdma_table_addr_phy 3760a000 reg_buf ffffffc035af9000
  357. [ 2.553105@0] dil:err:DI_POST_REG_RD:not attach
  358. [ 2.566402@2] rdma_register success, handle 3 table_size 4096
  359. [ 2.572090@2] fb: osd_rdma_init:osd rdma handle = 3.
  360. [ 2.573034@0] dil:err:DI_POST_REG_RD:not attach
  361. [ 2.581498@2] fb: mem_size: 0x800000
  362. [ 2.585019@2] fb: mem_size: 0x1800000
  363. [ 2.588651@2] fb: mem_size: 0x100000
  364. [ 2.592184@2] fb: mem_size: 0x0
  365. [ 2.593097@0] dil:err:DI_POST_REG_RD:not attach
  366. [ 2.599773@2] fb: mem_size: 0x0
  367. [ 2.602936@2] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
  368. [ 2.609957@2] fb: reserved memory base:0x000000003d800000, size:800000
  369. [ 2.613034@0] dil:err:DI_POST_REG_RD:not attach
  370. [ 2.621064@2] fb: init fbdev bpp is:32
  371. [ 2.625374@2] fb: set osd0 reverse as NONE
  372. [ 2.633108@0] dil:err:DI_POST_REG_RD:not attach
  373. [ 2.633188@2] fb: osd probe OK
  374. [ 2.636378@2] hdmitx: hdcp: hdmitx_hdcp_init
  375. [ 2.641068@2] DI: di_module_init ok.
  376. [ 2.644179@2] DI: di_probe:
  377. [ 2.646720@2] DI: di_probe: major 511
  378. [ 2.650583@2] deinterlace deinterlace: assigned reserved memory node linux,di_cma
  379. [ 2.653062@0] dil:err:DI_POST_REG_RD:not attach
  380. [ 2.662227@2] di:flag_cma=1
  381. [ 2.664973@2] DI: CMA size 0x2000000.
  382. [ 2.668629@2] pre_irq:44
  383. [ 2.671110@2] post_irq:45
  384. [ 2.673114@0] dil:err:DI_POST_REG_RD:not attach
  385. [ 2.678178@2] DI: di_probe allocate rdma channel 0.
  386. [ 2.683022@2] 0x000000c5:Y=c5,U=0,V=0
  387. [ 2.686631@2] 0x000000c6:Y=c6,U=0,V=0
  388. [ 2.690255@2] 0x000000c7:Y=c7,U=0,V=0
  389. [ 2.693037@0] dil:err:DI_POST_REG_RD:not attach
  390. [ 2.698359@2] 0x000000c8:Y=c8,U=0,V=0
  391. [ 2.701981@2] 0x000000c9:Y=c9,U=0,V=0
  392. [ 2.705605@2] 0x000000ca:Y=ca,U=0,V=0
  393. [ 2.709219@2] 0x000000cb:Y=cb,U=0,V=0
  394. [ 2.712848@2] 0x000000cc:Y=cc,U=0,V=0
  395. [ 2.713096@0] dil:err:DI_POST_REG_RD:not attach
  396. [ 2.720955@2] 0x000000cd:Y=cd,U=0,V=0
  397. [ 2.724578@2] 0x000000ce:Y=ce,U=0,V=0
  398. [ 2.728204@2] 0x000000cf:Y=cf,U=0,V=0
  399. [ 2.731825@2] 0x000000d0:Y=d0,U=0,V=0
  400. [ 2.733033@0] dil:err:DI_POST_REG_RD:not attach
  401. [ 2.739930@2] 0x000000d1:Y=d1,U=0,V=0
  402. [ 2.743553@2] 0x000000d2:Y=d2,U=0,V=0
  403. [ 2.747176@2] 0x000000d3:Y=d3,U=0,V=0
  404. [ 2.750798@2] 0x000000d4:Y=d4,U=0,V=0
  405. [ 2.753096@0] dil:err:DI_POST_REG_RD:not attach
  406. [ 2.758907@2] 0x000000d5:Y=d5,U=0,V=0
  407. [ 2.762528@2] 0x000000d6:Y=d6,U=0,V=0
  408. [ 2.766151@2] 0x000000d7:Y=d7,U=0,V=0
  409. [ 2.769773@2] 0x000000d8:Y=d8,U=0,V=0
  410. [ 2.773032@0] dil:err:DI_POST_REG_RD:not attach
  411. [ 2.777882@2] 0x000000d9:Y=d9,U=0,V=0
  412. [ 2.781503@2] 0x000000da:Y=da,U=0,V=0
  413. [ 2.785120@2] 0x000000db:Y=db,U=0,V=0
  414. [ 2.788748@2] 0x000000dc:Y=dc,U=0,V=0
  415. [ 2.792370@2] 0x000000dd:Y=dd,U=0,V=0
  416. [ 2.793096@0] dil:err:DI_POST_REG_RD:not attach
  417. [ 2.800479@2] DI: support multi decoding 219~220~221.
  418. [ 2.805599@2] DI: di_probe:Di use HRTIMER
  419. [ 2.809610@2] DI: di_probe:ok
  420. [ 2.812467@2] dim:dim_module_init
  421. [ 2.816016@2] dim:dim_module_init finish
  422. [ 2.819554@2] dil:dil_init.
  423. [ 2.822555@2] dil:dil_init ok.
  424. [ 2.825370@2] vdin_drv_init: major 510
  425. [ 2.829429@2] rdma_register, rdma_table_addr ffffff80083fd000 rdma_table_addr_phy 3760b000 reg_buf ffffffc012f4be00
  426. [ 2.839401@2] rdma_register success, handle 4 table_size 512
  427. [ 2.844994@2] vdin_drv_probe:vdin.0 rdma hanld 4.
  428. [ 2.849887@2]
  429. [ 2.849887@2] vdin memory resource undefined!!
  430. [ 2.855813@2] vdin0 cma_mem_size = 16 MB
  431. [ 2.859651@2] vdin0 irq: 46 rdma irq: 2
  432. [ 2.863474@2] set_canvas_manual = 0
  433. [ 2.866926@2] get fclk_div5 err
  434. [ 2.870000@2] vdin_drv_probe: vdin cannot get msr clk !!!
  435. [ 2.875379@2] vdin_drv_probe: driver initialized ok
  436. [ 2.880357@2] rdma_register, rdma_table_addr ffffff8008501000 rdma_table_addr_phy 3760c000 reg_buf ffffffc012eaa000
  437. [ 2.890545@2] rdma_register success, handle 5 table_size 512
  438. [ 2.896144@2] vdin_drv_probe:vdin.1 rdma hanld 5.
  439. [ 2.901066@2] vdin vdin1: assigned reserved memory node linux,vdin1_cma
  440. [ 2.907385@2]
  441. [ 2.907385@2] vdin memory resource done.
  442. [ 2.912953@2] vdin1 cma_mem_size = 16 MB
  443. [ 2.916846@2] vdin1 irq: 47 rdma irq: 4
  444. [ 2.920628@2] set_canvas_manual = 0
  445. [ 2.924109@2] get fclk_div5 err
  446. [ 2.927189@2] vdin_drv_probe: vdin cannot get msr clk !!!
  447. [ 2.932542@2] vdin_debugfs_init only support debug vdin0 1
  448. [ 2.937967@2] vdin_drv_probe: driver initialized ok
  449. [ 2.942875@2] vdin_drv_init: vdin driver init done
  450. [ 2.947556@2] [viuin..]viuin_init_module viuin module init
  451. [ 2.953377@2] [viuin..]viuin_probe probe ok.
  452. [ 2.957853@2] [RX]-hdmirx: hdmirx_init.
  453. [ 2.960989@2] ESM HLD: Initializing...
  454. [ 2.965697@2] PPMGRDRV: warn: ppmgr module init func called
  455. [ 2.970441@2] PPMGRDRV: info: ppmgr_driver_probe called
  456. [ 2.975472@2] Reserved memory: failed to init DMA memory pool at 0x000000003d800000, size 0 MiB
  457. [ 2.984052@2] PPMGRDRV: info: ppmgr_dev major:508
  458. [ 2.989357@2] aml_vecm_init:module init
  459. [ 2.992751@2] VECM probe start
  460. [ 2.995880@2] vlock_status_init vlock_en:1
  461. [ 2.999566@2] aml_vecm_probe: ok
  462. [ 3.002820@2] amdolby_vision_init:module init
  463. [ 3.007906@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
  464. [ 3.015872@2] meson-mmc: >>>>>>>>hostbase ffffff8008508000, dmode
  465. [ 3.061358@2] meson-mmc: meson_mmc_probe() : success!
  466. [ 3.067470@1] meson-mmc: >>>>>>>>hostbase ffffff8008524000, dmode
  467. [ 3.068141@1] meson-mmc: gpio_cd = 1c1
  468. [ 3.109362@1] meson-mmc: meson_mmc_probe() : success!
  469. [ 3.111481@1] meson-mmc: >>>>>>>>hostbase ffffff800852e000, dmode
  470. [ 3.153361@1] meson-mmc: meson_mmc_probe() : success!
  471. [ 3.153701@1] amlogic mtd driver init
  472. [ 3.155729@2] meson-mmc: emmc: trying cali 0-th time(s)
  473. [ 3.162407@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
  474. [ 3.166214@2] meson-mmc: emmc: delay[0]= 1800 padding= 1, bidx=1
  475. [ 3.166217@2] meson-mmc: emmc: delay[1]= 2400 padding= 3, bidx=2
  476. [ 3.166220@2] meson-mmc: emmc: delay[2]= 1800 padding= 1, bidx=1
  477. [ 3.166222@2] meson-mmc: emmc: delay[3]= 2400 padding= 3, bidx=2
  478. [ 3.166224@2] meson-mmc: emmc: delay[4]= 2400 padding= 3, bidx=2
  479. [ 3.166226@2] meson-mmc: emmc: delay[5]= 2200 padding= 4, bidx=2
  480. [ 3.166228@2] meson-mmc: emmc: delay[6]= 2400 padding= 3, bidx=2
  481. [ 3.166230@2] meson-mmc: emmc: delay[7]= 2200 padding= 4, bidx=2
  482. [ 3.166232@2] meson-mmc: emmc: calibration result : max(2400), min(1800)
  483. [ 3.166236@2] meson-mmc: emmc: line_delay =0x10100303, max_cal_result =2400
  484. [ 3.166237@2] meson-mmc: calibration @0 times ok
  485. [ 3.166264@2] meson-mmc: emmc: base_index_max 2, base_index_min 1
  486. [ 3.166266@2] meson-mmc: Data 1 aligned delay is 0
  487. [ 3.166270@2] meson-mmc: emmc: clk 100000000 SDR mode tuning start
  488. [ 3.178076@2] meson-mmc: emmc: adj_win: < 0 1 2 3 4 5 7 8 9 >
  489. [ 3.178080@2] meson-mmc: emmc: best_win_start =7, best_win_size =9
  490. [ 3.178083@2] meson-mmc: emmc: clock=0x100024a, adjust=0x12000
  491. [ 3.178087@2] meson-mmc: emmc: clock =0x100024a, delay=0x10100303, adjust=0x12000
  492. [ 3.178432@2] emmc: new HS200 MMC card at address 0001
  493. [ 3.179264@2] emmc: clock 100000000, 8-bit-bus-width
  494. [ 3.179264@2]
  495. [ 3.179264@2] mmcblk0: emmc:0001 T22708 7.13 GiB
  496. [ 3.179446@2] mmcblk0boot0: emmc:0001 T22708 partition 1 4.00 MiB
  497. [ 3.179610@2] mmcblk0boot1: emmc:0001 T22708 partition 2 4.00 MiB
  498. [ 3.179773@2] mmcblk0rpmb: emmc:0001 T22708 partition 3 4.00 MiB
  499. [ 3.181581@2] meson-mmc: Enter aml_emmc_partition_ops
  500. [ 3.182233@2] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
  501. [ 3.182234@2] meson-mmc: add_emmc_partition
  502. [ 3.182512@2] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  503. [ 3.182668@2] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  504. [ 3.182832@2] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
  505. [ 3.183000@2] meson-mmc: [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
  506. [ 3.183155@2] meson-mmc: [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
  507. [ 3.183287@2] meson-mmc: [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
  508. [ 3.183565@2] meson-mmc: [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
  509. [ 3.183801@2] meson-mmc: [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
  510. [ 3.183962@2] meson-mmc: [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
  511. [ 3.184143@2] meson-mmc: [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
  512. [ 3.184294@2] meson-mmc: [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000
  513. [ 3.184443@2] meson-mmc: [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000
  514. [ 3.184590@2] meson-mmc: [mmcblk0p13] system offset 0x000057400000, size 0x000040000000
  515. [ 3.184723@2] meson-mmc: [mmcblk0p14] data offset 0x000097c00000, size 0x000130400000
  516. [ 3.184749@2] card key: card_blk_probe.
  517. [ 3.184754@2] emmc_key_init:182 emmc key lba_start:0x12020,lba_end:0x12220
  518. [ 3.184759@2] emmc key: emmc_key_init:205 ok.
  519. [ 3.189261@2] meson-mmc: amlmmc_dtb_init: register dtb chardev
  520. [ 3.189262@2] meson-mmc: calc a6daedf, store 90a3e65
  521. [ 3.189266@2] meson-mmc: cpy 1 is not valid
  522. [ 3.193688@2] meson-mmc: calc ef484d7a, store 52806003
  523. [ 3.193692@2] meson-mmc: cpy 0 is not valid
  524. [ 3.193694@2] meson-mmc: total valid 0
  525. [ 3.194112@2] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
  526. [ 3.194335@2] meson-mmc: amlmmc_ddr_init: register ddr_parameter chardev
  527. [ 3.194389@2] meson-mmc: amlmmc_ddr_init: register ddr parameter chardev OK
  528. [ 3.194389@2] meson-mmc: Exit aml_emmc_partition_ops OK.
  529. [ 3.314776@1] meson-mmc: card IN
  530. [ 3.418954@1] meson-mmc: normal card in
  531. [ 3.530624@2] input: aml_vkeypad as /devices/platform/rtc/input/input1
  532. [ 3.538002@2] cectx c810023c.aocec: cec driver date:2020/03/16:reduece no msg in sleep time
  533. [ 3.538002@2]
  534. [ 3.547099@2] cectx c810023c.aocec: compatible:amlogic, amlogic-aocec
  535. [ 3.553206@2] cectx c810023c.aocec: cecb_ver:0x0
  536. [ 3.557778@2] cectx c810023c.aocec: line_reg:0x0
  537. [ 3.562327@2] cectx c810023c.aocec: line_bit:0x8
  538. [ 3.566925@2] cectx c810023c.aocec: ee_to_ao:0x0
  539. [ 3.571649@2] input: cec_input as /devices/virtual/input/input2
  540. [ 3.577579@2] cectx c810023c.aocec: not find 'port_num'
  541. [ 3.582540@2] cectx c810023c.aocec: using cec:0
  542. [ 3.587013@2] cectx c810023c.aocec: get sleep state error!
  543. [ 3.592472@2] cectx c810023c.aocec: no hdmirx regs
  544. [ 3.597205@2] cectx c810023c.aocec: no hhi regs
  545. [ 3.601662@2] cectx c810023c.aocec: no periphs regs
  546. [ 3.606504@2] cectx c810023c.aocec: not find 'output'
  547. [ 3.612801@1] sd: new high speed SDHC card at address 0001
  548. [ 3.614629@2] irq cnt:1, a:34, b34
  549. [ 3.615396@2] cectx c810023c.aocec: wakeup_reason:0x0
  550. [ 3.615447@2] cectx c810023c.aocec: cev val1: 0x0;val2: 0x0
  551. [ 3.615452@2] cectx c810023c.aocec: aml_cec_probe success end
  552. [ 3.616546@2] unifykey: no efuse-version set, use default value: -1
  553. [ 3.617013@2] unifykey: aml_unifykeys_init done!
  554. [ 3.617487@2] audio_dsp: [dsp]register dsp to char divece(257)
  555. [ 3.617824@2] amaudio: amaudio: driver amaudio init!
  556. [ 3.618432@2] amaudio: amaudio_init - amaudio: driver amaudio succuess!
  557. [ 3.619548@2] sysled: module init
  558. [ 3.620079@2] meson_wdt c11098d0.watchdog: start watchdog
  559. [ 3.620083@2] meson_wdt c11098d0.watchdog: creat work queue for watch dog
  560. [ 3.620470@2] meson_wdt c11098d0.watchdog: AML Watchdog Timer probed done
  561. [ 3.621509@2] amlogic rfkill init
  562. [ 3.621771@2] enter bt_probe of_node
  563. [ 3.621813@2] not get gpio_en
  564. [ 3.621814@2] not get gpio_hostwake
  565. [ 3.621816@2] not get gpio_btwakeup
  566. [ 3.621821@2] power on valid level is high
  567. [ 3.621821@2] bt: power_on_pin_OD = 0;
  568. [ 3.621823@2] bt: power_off_flag = 1;
  569. [ 3.621824@2] dis power down = 0;
  570. [ 3.645559@2] request_irq error ret=-22
  571. [ 3.645624@2] dev_pm_set_wake_irq failed: -22
  572. [ 3.648465@0] dmc_monitor_probe
  573. [ 3.649293@0] defendkey c8834500.defendkey: Reserved memory is not enough!
  574. [ 3.649312@0] defendkey: probe of c8834500.defendkey failed with error -22
  575. [ 3.650333@0] bl301_manager: driver init
  576. [ 3.650337@0] bl301_manager: IR remote wake-up code: 0xffffffff
  577. [ 3.650339@0] bl301_manager: IR remote wake-up code mask: 0xffffffff
  578. [ 3.650341@0] bl301_manager: IR remote wake-up code protocol: 0x0
  579. [ 3.650343@0] bl301_manager: enable 5V system power on suspend/power off state: 0
  580. [ 3.651246@0] usbcore: registered new interface driver snd-usb-audio
  581. [ 3.653720@0] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
  582. [ 3.653761@0] T9015 acodec used by meson, tdmout:0
  583. [ 3.655826@0] snd_i2s_dai: clock source gate top_glue : ffffffc012e9bbc0
  584. [ 3.655853@0] snd_i2s_dai: clock source gate aud_buf : ffffffc012e9bb00
  585. [ 3.655875@0] snd_i2s_dai: clock source gate i2s_out : ffffffc012e9ba40
  586. [ 3.655899@0] snd_i2s_dai: clock source gate amclk_measure : ffffffc012e9b780
  587. [ 3.655925@0] snd_i2s_dai: clock source gate aififo2 : ffffffc012e9b580
  588. [ 3.655954@0] snd_i2s_dai: clock source gate aud_mixer : ffffffc012e9b600
  589. [ 3.655986@0] snd_i2s_dai: clock source gate mixer_reg : ffffffc012e9b400
  590. [ 3.656020@0] snd_i2s_dai: clock source gate adc : ffffffc012e9b340
  591. [ 3.656058@0] snd_i2s_dai: clock source gate top_level : ffffffc012e9b240
  592. [ 3.656098@0] snd_i2s_dai: clock source gate aoclk : ffffffc012e9b180
  593. [ 3.656141@0] snd_i2s_dai: clock source gate aud_in : ffffffc012e9b040
  594. [ 3.656149@0] snd_i2s_dai: ignore aud_buf/vdac_clk gate
  595. [ 3.656427@0] aml-i2s-dai I2S: I2S Mic is in platform!
  596. [ 3.657724@0] snd_pcm_dai: pcm mode detection =1
  597. [ 3.657994@0] snd_pcm_dai: tdm config: 0x1, 0x1, 2, 16
  598. [ 3.658799@0] snd_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
  599. [ 3.658955@0] snd_spdif_dai: set normal 512 fs /4 fs
  600. [ 3.658957@0] snd_spdif_dai: set 958 audio clk div 4
  601. [ 3.658970@0] hdmitx: audio: aout notify format CT_PCM
  602. [ 3.659986@0] spdif-dit spdif_codec: audio_spdif_out_mute can't get pinctrl
  603. [ 3.660056@0] spdif-dit spdif_codec: audio_spdif_in_mute can't get pinctrl
  604. [ 3.660060@0] spdif-dit spdif_codec: audio_spdif_in can't get pinctrl
  605. [ 3.660832@0] snd_card_meson: aml_card_dai_parse_of codec_node count:1
  606. [ 3.660903@0] snd_card_meson: aml_card_dai_parse_of codec_node count:1
  607. [ 3.660989@0] snd_card_meson: aml_card_dai_parse_of codec_node count:1
  608. [ 3.662553@0] snd_card_meson: headphone detection disable=1
  609. [ 3.662557@0] snd_card_meson: no spk event delay time set
  610. [ 3.665286@0] aml_meson_snd_card aml_sound_meson: T9015-audio-hifi <-> I2S mapping ok
  611. [ 3.666051@0] aml_meson_snd_card aml_sound_meson: dit-hifi <-> SPDIF mapping ok
  612. [ 3.666171@0] snd_pcm: enter aml_pcm_new dai->name: PCM dai->id: 0
  613. [ 3.666538@0] aml_meson_snd_card aml_sound_meson: pcm2bt-pcm <-> PCM mapping ok
  614. [ 3.666572@0] aml_meson_snd_card aml_sound_meson: ASoC: no source widget found for LOUTL
  615. [ 3.666576@0] aml_meson_snd_card aml_sound_meson: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
  616. [ 3.666581@0] aml_meson_snd_card aml_sound_meson: ASoC: no source widget found for LOUTR
  617. [ 3.666584@0] aml_meson_snd_card aml_sound_meson: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
  618. [ 3.666794@0] aml-spdif-dai SPDIF: ASoC: Failed to create S/PDIF Playback debugfs file
  619. [ 3.666798@0] aml-spdif-dai SPDIF: ASoC: Failed to create S/PDIF Capture debugfs file
  620. [ 3.668512@0] snd_card_meson: enable i2sclk in startup
  621. [ 3.674506@0] Register vad
  622. [ 3.675771@0] NET: Registered protocol family 10
  623. [ 3.677018@0] NET: Registered protocol family 17
  624. [ 3.677119@0] Key type dns_resolver registered
  625. [ 3.677823@0] Registered swp emulation handler
  626. [ 3.679881@0] Registered cp15_barrier emulation handler
  627. [ 3.679894@0] Registered setend emulation handler
  628. [ 3.679942@0] disable EAS feature
  629. [ 3.690868@2] registered taskstats version 1
  630. [ 3.698602@0] dwc3 c9000000.dwc3: Configuration mismatch. dr_mode forced to host
  631. [ 4.083796@1] sd: clock 50000000, 4-bit-bus-width
  632. [ 4.083796@1]
  633. [ 4.089028@1] mmcblk1: sd:0001 EB1QT 29.8 GiB
  634. [ 4.202654@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  635. [ 4.202728@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  636. [ 4.210893@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x02010010
  637. [ 4.219346@2] xhci-hcd xhci-hcd.0.auto: irq 30, io mem 0xc9000000
  638. [ 4.225473@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  639. [ 4.232209@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  640. [ 4.239892@2] usb usb1: Product: xHCI Host Controller
  641. [ 4.244530@2] usb usb1: Manufacturer: Linux 4.9.113 xhci-hcd
  642. [ 4.250150@2] usb usb1: SerialNumber: xhci-hcd.0.auto
  643. [ 4.255816@0] hub 1-0:1.0: USB hub found
  644. [ 4.259091@0] hub 1-0:1.0: 2 ports detected
  645. [ 4.263466@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  646. [ 4.268781@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  647. [ 4.276723@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  648. [ 4.284817@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  649. [ 4.291626@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  650. [ 4.299041@0] usb usb2: Product: xHCI Host Controller
  651. [ 4.303958@0] usb usb2: Manufacturer: Linux 4.9.113 xhci-hcd
  652. [ 4.309567@0] usb usb2: SerialNumber: xhci-hcd.0.auto
  653. [ 4.315234@1] hub 2-0:1.0: USB hub found
  654. [ 4.318503@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  655. [ 4.325752@1] usb usb2: Unsupported the hub
  656. [ 4.330237@1] aml_vrtc rtc: setting system clock to 2017-01-01 00:00:08 UTC (1483228808)
  657. [ 4.338257@1] dwc_otg c9100000.dwc2_a: dwc_otg_driver_probe(ffffffc035a39400)
  658. [ 4.338288@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
  659. [ 4.346483@1] dwc_otg_driver_probe host only, not probe usb_otg!!!
  660. [ 4.354507@0] cpucore_cooling_register, max_cpu_core_num:4
  661. [ 4.363818@0] gxbb_pm: enter meson_pm_probe!
  662. [ 4.363876@0] gxbb_pm: system suspend level: 1
  663. [ 4.367042@0] no vddio3v3_en pin
  664. [ 4.369924@0] pm-meson aml_pm: Can't get switch_clk81
  665. [ 4.375052@0] gxbb_pm: meson_pm_probe done
  666. [ 4.379366@0] ALSA device list:
  667. [ 4.382071@0] #0: AML-MESONAUDIO
  668. [ 4.387419@0] Freeing unused kernel memory: 4864K
  669. [ 4.444787@3] fb: malloc_osd_memory, cma:ffffff800ad798e0
  670. [ 4.444841@3] fb: malloc_osd_memory, 1217, base:0x000000003d800000, size:8388608
  671. [ 4.451985@3] fb: use ion buffer for fb memory, fb_index=0
  672. [ 4.465755@3] meson-fb meson-fb: create ion_client ffffffc012e63c00, handle=ffffffc03596c9c0
  673. [ 4.468571@3] meson-fb meson-fb: ion memory(0): created fb at 0x0000000037c00000, size 24 MiB
  674. [ 4.473257@0] vpu: switch_vpu_mem_pd: unsupport vpu mod: 12
  675. [ 4.482574@3] fb: Frame buffer memory assigned at
  676. [ 4.487046@3] fb: 0, phy: 0x0000000037c00000, vir:0xffffff800bbf5000, size=24576K
  677. [ 4.487046@3]
  678. [ 4.496187@3] fb: logo_index=0,fb_index=0
  679. [ 4.500192@3] fb: osd[0] canvas.idx =0x40
  680. [ 4.500194@3] fb: osd[0] canvas.addr=0x37c00000
  681. [ 4.500195@3] fb: osd[0] canvas.width=7680
  682. [ 4.500197@3] fb: osd[0] canvas.height=3240
  683. [ 4.500198@3] fb: osd[0] frame.width=1920
  684. [ 4.500200@3] fb: osd[0] frame.height=1080
  685. [ 4.500201@3] fb: osd[0] out_addr_id =0x0
  686. [ 4.536552@0] fb: osd_release now.index=0,open_count=1
  687. [ 4.543661@3] fb: malloc_osd_memory, cma:ffffff800ad798e0
  688. [ 4.546701@3] fb: malloc_osd_memory, 1217, base:0x000000003d800000, size:8388608
  689. [ 4.554004@3] fb: use ion buffer for fb memory, fb_index=1
  690. [ 4.560023@3] meson-fb meson-fb: create ion_client ffffffc012e63c00, handle=ffffffc03596cdc0
  691. [ 4.567822@3] meson-fb meson-fb: ion memory(1): created fb at 0x0000000039400000, size 1 MiB
  692. [ 4.576194@3] fb: Frame buffer memory assigned at
  693. [ 4.580656@3] fb: 1, phy: 0x0000000039400000, vir:0xffffff800d3f6000, size=1024K
  694. [ 4.580656@3]
  695. [ 4.589711@3] fb: logo_index=0,fb_index=1
  696. [ 4.593679@3] fb: ---------------clear fb1 memory ffffff800d3f6000
  697. [ 4.600270@3] fb: osd[1] canvas.idx =0x43
  698. [ 4.601369@0] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  699. [ 4.610410@3] fb: osd[1] canvas.addr=0x39400000
  700. [ 4.614894@3] fb: osd[1] canvas.width=128
  701. [ 4.618861@3] fb: osd[1] canvas.height=32
  702. [ 4.622828@3] fb: osd[1] frame.width=32
  703. [ 4.626623@3] fb: osd[1] frame.height=32
  704. [ 4.630505@3] fb: osd[1] out_addr_id =0x0
  705. [ 4.655604@0] fb: osd_release now.index=1,open_count=1
  706. [ 4.673500@0] VID: VD1 off
  707. [ 4.673706@0] fb: osd[0] enable: 1 (sh)
  708. [ 4.693326@1] fb: osd[1] enable: 0 (sh)
  709. [ 4.746470@0] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
  710. [ 4.746474@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  711. [ 4.746477@0] usb 1-1: Product: USB2.0 Hub
  712. [ 4.753243@0] Console: switching to colour frame buffer device 240x67
  713. [ 4.757117@0] hub 1-1:1.0: USB hub found
  714. [ 4.757414@0] hub 1-1:1.0: 4 ports detected
  715. [ 4.778527@0] Checking disk(s): LABEL=COREELEC LABEL=STORAGE
  716. [ 5.045373@0] usb 1-1.2: new low-speed USB device number 3 using xhci-hcd
  717. [ 5.150758@0] usb 1-1.2: New USB device found, idVendor=0c40, idProduct=8000
  718. [ 5.150763@0] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  719. [ 5.150766@0] usb 1-1.2: Product: iPazzPort
  720. [ 5.150769@0] usb 1-1.2: Manufacturer: ELMCU
  721. [ 5.177004@0] input: ELMCU iPazzPort as /devices/platform/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:0C40:8000.0001/input/input3
  722. [ 5.234419@0] hid-generic 0003:0C40:8000.0001: input,hidraw0: USB HID v1.11 Keyboard [ELMCU iPazzPort] on usb-xhci-hcd.0.auto-1.2/input0
  723. [ 5.239011@0] input: ELMCU iPazzPort as /devices/platform/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:0C40:8000.0002/input/input4
  724. [ 5.297836@0] hid-generic 0003:0C40:8000.0002: input,hidraw1: USB HID v1.11 Mouse [ELMCU iPazzPort] on usb-xhci-hcd.0.auto-1.2/input1
  725. [ 5.841345@2] lcd vlock_en=1, vlock_mode=0x4
  726. [ 8.188545@0] meson-mmc: sd: resp_timeout,vstat:0xe1ff1800,virqc:3fff
  727. [ 8.188549@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  728. [ 8.188569@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:18
  729. [ 8.188575@3] meson-mmc: meson_mmc_irq_thread() 2794: set 1st retry!
  730. [ 8.188577@3] meson-mmc: retry cmd 18 the 10-th time(s)
  731. [ 8.188580@3] meson-mmc: sd, retry, rx_phase 0 -> 1
  732. [ 8.188596@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  733. [ 8.188620@2] sd: req failed (CMD18): -110, retrying...
  734. [ 11.245349@1] vout: aml_tvout_mode_work: monitor_timeout
  735. [ 12.283542@0] meson-mmc: sd: resp_timeout,vstat:0xe1ff1800,virqc:3fff
  736. [ 12.283546@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  737. [ 12.283565@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:18
  738. [ 12.283570@3] meson-mmc: retry cmd 18 the 9-th time(s)
  739. [ 12.283572@3] meson-mmc: sd, retry, rx_phase 1 -> 2
  740. [ 12.283589@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  741. [ 12.283613@2] sd: req failed (CMD18): -110, retrying...
  742. [ 16.378545@0] meson-mmc: sd: resp_timeout,vstat:0xe1ff1800,virqc:3fff
  743. [ 16.378549@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  744. [ 16.378568@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:18
  745. [ 16.378574@3] meson-mmc: retry cmd 18 the 8-th time(s)
  746. [ 16.378576@3] meson-mmc: sd, retry, rx_phase 2 -> 3
  747. [ 16.378592@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  748. [ 16.378616@2] sd: req failed (CMD18): -110, retrying...
  749. [ 20.473544@0] meson-mmc: sd: resp_timeout,vstat:0xe1ff1800,virqc:3fff
  750. [ 20.473548@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  751. [ 20.473567@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:18
  752. [ 20.473573@3] meson-mmc: retry cmd 18 the 7-th time(s)
  753. [ 20.473575@3] meson-mmc: sd, retry, rx_phase 3 -> 0
  754. [ 20.473591@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  755. [ 20.473614@2] sd: req failed (CMD18): -110, retrying...
  756. [ 24.568544@0] meson-mmc: sd: resp_timeout,vstat:0xe1ff1800,virqc:3fff
  757. [ 24.568548@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  758. [ 24.568567@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:18
  759. [ 24.568572@3] meson-mmc: retry cmd 18 the 6-th time(s)
  760. [ 24.568574@3] meson-mmc: sd, retry, rx_phase 0 -> 1
  761. [ 24.568590@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  762. [ 24.568614@2] sd: req failed (CMD18): -110, retrying...
  763. [ 28.663544@0] meson-mmc: sd: resp_timeout,vstat:0xe1ff1800,virqc:3fff
  764. [ 28.663548@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  765. [ 28.663567@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:18
  766. [ 28.663573@3] meson-mmc: retry cmd 18 the 5-th time(s)
  767. [ 28.663575@3] meson-mmc: sd, retry, rx_phase 1 -> 2
  768. [ 28.663591@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  769. [ 28.663615@2] sd: req failed (CMD18): -110, retrying...
  770. [ 32.758545@0] meson-mmc: sd: resp_timeout,vstat:0xe1ff1800,virqc:3fff
  771. [ 32.758549@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  772. [ 32.758568@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:18
  773. [ 32.758574@3] meson-mmc: retry cmd 18 the 4-th time(s)
  774. [ 32.758576@3] meson-mmc: sd, retry, rx_phase 2 -> 3
  775. [ 32.758592@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  776. [ 32.758616@2] sd: req failed (CMD18): -110, retrying...
  777. [ 36.853545@0] meson-mmc: sd: resp_timeout,vstat:0xe1ff1800,virqc:3fff
  778. [ 36.853549@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  779. [ 36.853568@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:18
  780. [ 36.853573@3] meson-mmc: retry cmd 18 the 3-th time(s)
  781. [ 36.853575@3] meson-mmc: sd, retry, rx_phase 3 -> 0
  782. [ 36.853591@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  783. [ 36.853613@2] sd: req failed (CMD18): -110, retrying...
  784. [ 40.948543@0] meson-mmc: sd: resp_timeout,vstat:0xe1ff1800,virqc:3fff
  785. [ 40.948547@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  786. [ 40.948564@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:18
  787. [ 40.948569@3] meson-mmc: retry cmd 18 the 2-th time(s)
  788. [ 40.948571@3] meson-mmc: sd, retry, rx_phase 0 -> 1
  789. [ 40.948586@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  790. [ 40.948607@2] sd: req failed (CMD18): -110, retrying...
  791. [ 45.043543@0] meson-mmc: sd: resp_timeout,vstat:0xe1ff1800,virqc:3fff
  792. [ 45.043546@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  793. [ 45.043564@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:18
  794. [ 45.043569@3] meson-mmc: retry cmd 18 the 1-th time(s)
  795. [ 45.043571@3] meson-mmc: sd, retry, rx_phase 1 -> 2
  796. [ 45.043586@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  797. [ 45.043608@2] sd: req failed (CMD18): -110, retrying...
  798. [ 49.138543@0] meson-mmc: sd: resp_timeout,vstat:0xe1ff1800,virqc:3fff
  799. [ 49.138546@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  800. [ 49.138565@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:18
  801. [ 49.138570@3] meson-mmc: Command retried failed line:2898, cmd:18
  802. [ 49.138585@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  803. [ 49.138622@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  804. [ 49.138625@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  805. [ 49.138633@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  806. [ 49.138635@3] meson-mmc: meson_mmc_irq_thread() 2794: set 1st retry!
  807. [ 49.138638@3] meson-mmc: retry cmd 13 the 10-th time(s)
  808. [ 49.138640@3] meson-mmc: sd, retry, rx_phase 2 -> 3
  809. [ 49.138660@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  810. [ 49.138663@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  811. [ 49.138671@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  812. [ 49.138673@3] meson-mmc: retry cmd 13 the 9-th time(s)
  813. [ 49.138675@3] meson-mmc: sd, retry, rx_phase 3 -> 0
  814. [ 49.138694@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  815. [ 49.138696@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  816. [ 49.138704@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  817. [ 49.138707@3] meson-mmc: retry cmd 13 the 8-th time(s)
  818. [ 49.138708@3] meson-mmc: sd, retry, rx_phase 0 -> 1
  819. [ 49.138727@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  820. [ 49.138729@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  821. [ 49.138737@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  822. [ 49.138739@3] meson-mmc: retry cmd 13 the 7-th time(s)
  823. [ 49.138741@3] meson-mmc: sd, retry, rx_phase 1 -> 2
  824. [ 49.138760@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  825. [ 49.138761@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  826. [ 49.138770@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  827. [ 49.138772@3] meson-mmc: retry cmd 13 the 6-th time(s)
  828. [ 49.138774@3] meson-mmc: sd, retry, rx_phase 2 -> 3
  829. [ 49.138792@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  830. [ 49.138794@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  831. [ 49.138802@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  832. [ 49.138804@3] meson-mmc: retry cmd 13 the 5-th time(s)
  833. [ 49.138806@3] meson-mmc: sd, retry, rx_phase 3 -> 0
  834. [ 49.138824@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  835. [ 49.138826@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  836. [ 49.138834@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  837. [ 49.138837@3] meson-mmc: retry cmd 13 the 4-th time(s)
  838. [ 49.138839@3] meson-mmc: sd, retry, rx_phase 0 -> 1
  839. [ 49.138857@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  840. [ 49.138859@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  841. [ 49.138867@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  842. [ 49.138869@3] meson-mmc: retry cmd 13 the 3-th time(s)
  843. [ 49.138871@3] meson-mmc: sd, retry, rx_phase 1 -> 2
  844. [ 49.138889@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  845. [ 49.138891@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  846. [ 49.138899@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  847. [ 49.138902@3] meson-mmc: retry cmd 13 the 2-th time(s)
  848. [ 49.138904@3] meson-mmc: sd, retry, rx_phase 2 -> 3
  849. [ 49.138922@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  850. [ 49.138924@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  851. [ 49.138932@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  852. [ 49.138934@3] meson-mmc: retry cmd 13 the 1-th time(s)
  853. [ 49.138936@3] meson-mmc: sd, retry, rx_phase 3 -> 0
  854. [ 49.138954@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  855. [ 49.138956@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  856. [ 49.138964@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  857. [ 49.138966@3] meson-mmc: Command retried failed line:2898, cmd:13
  858. [ 49.138975@2] mmcblk1: error -110 sending status command, retrying
  859. [ 49.138990@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  860. [ 49.138992@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  861. [ 49.139000@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  862. [ 49.139003@3] meson-mmc: meson_mmc_irq_thread() 2794: set 1st retry!
  863. [ 49.139005@3] meson-mmc: retry cmd 13 the 10-th time(s)
  864. [ 49.139007@3] meson-mmc: sd, retry, rx_phase 0 -> 1
  865. [ 49.139025@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  866. [ 49.139027@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  867. [ 49.139035@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  868. [ 49.139037@3] meson-mmc: retry cmd 13 the 9-th time(s)
  869. [ 49.139039@3] meson-mmc: sd, retry, rx_phase 1 -> 2
  870. [ 49.139057@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  871. [ 49.139059@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  872. [ 49.139067@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  873. [ 49.139069@3] meson-mmc: retry cmd 13 the 8-th time(s)
  874. [ 49.139071@3] meson-mmc: sd, retry, rx_phase 2 -> 3
  875. [ 49.139089@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  876. [ 49.139091@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  877. [ 49.139099@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  878. [ 49.139101@3] meson-mmc: retry cmd 13 the 7-th time(s)
  879. [ 49.139103@3] meson-mmc: sd, retry, rx_phase 3 -> 0
  880. [ 49.139121@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  881. [ 49.139124@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  882. [ 49.139132@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  883. [ 49.139134@3] meson-mmc: retry cmd 13 the 6-th time(s)
  884. [ 49.139136@3] meson-mmc: sd, retry, rx_phase 0 -> 1
  885. [ 49.139154@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  886. [ 49.139156@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  887. [ 49.139164@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  888. [ 49.139166@3] meson-mmc: retry cmd 13 the 5-th time(s)
  889. [ 49.139168@3] meson-mmc: sd, retry, rx_phase 1 -> 2
  890. [ 49.139186@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  891. [ 49.139188@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  892. [ 49.139196@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  893. [ 49.139198@3] meson-mmc: retry cmd 13 the 4-th time(s)
  894. [ 49.139200@3] meson-mmc: sd, retry, rx_phase 2 -> 3
  895. [ 49.139218@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  896. [ 49.139220@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  897. [ 49.139228@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  898. [ 49.139230@3] meson-mmc: retry cmd 13 the 3-th time(s)
  899. [ 49.139232@3] meson-mmc: sd, retry, rx_phase 3 -> 0
  900. [ 49.139250@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  901. [ 49.139252@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  902. [ 49.139260@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  903. [ 49.139262@3] meson-mmc: retry cmd 13 the 2-th time(s)
  904. [ 49.139264@3] meson-mmc: sd, retry, rx_phase 0 -> 1
  905. [ 49.139282@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  906. [ 49.139284@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  907. [ 49.139292@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  908. [ 49.139294@3] meson-mmc: retry cmd 13 the 1-th time(s)
  909. [ 49.139296@3] meson-mmc: sd, retry, rx_phase 1 -> 2
  910. [ 49.139314@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  911. [ 49.139316@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  912. [ 49.139324@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  913. [ 49.139327@3] meson-mmc: Command retried failed line:2898, cmd:13
  914. [ 49.139334@2] mmcblk1: error -110 sending status command, retrying
  915. [ 49.139348@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  916. [ 49.139350@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  917. [ 49.139358@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  918. [ 49.139361@3] meson-mmc: meson_mmc_irq_thread() 2794: set 1st retry!
  919. [ 49.139362@3] meson-mmc: retry cmd 13 the 10-th time(s)
  920. [ 49.139364@3] meson-mmc: sd, retry, rx_phase 2 -> 3
  921. [ 49.139383@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  922. [ 49.139384@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  923. [ 49.139392@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  924. [ 49.139395@3] meson-mmc: retry cmd 13 the 9-th time(s)
  925. [ 49.139397@3] meson-mmc: sd, retry, rx_phase 3 -> 0
  926. [ 49.139415@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  927. [ 49.139417@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  928. [ 49.139425@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  929. [ 49.139427@3] meson-mmc: retry cmd 13 the 8-th time(s)
  930. [ 49.139429@3] meson-mmc: sd, retry, rx_phase 0 -> 1
  931. [ 49.139447@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  932. [ 49.139449@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  933. [ 49.139457@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  934. [ 49.139459@3] meson-mmc: retry cmd 13 the 7-th time(s)
  935. [ 49.139461@3] meson-mmc: sd, retry, rx_phase 1 -> 2
  936. [ 49.139479@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  937. [ 49.139481@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  938. [ 49.139489@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  939. [ 49.139492@3] meson-mmc: retry cmd 13 the 6-th time(s)
  940. [ 49.139494@3] meson-mmc: sd, retry, rx_phase 2 -> 3
  941. [ 49.139512@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  942. [ 49.139513@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  943. [ 49.139522@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  944. [ 49.139524@3] meson-mmc: retry cmd 13 the 5-th time(s)
  945. [ 49.139526@3] meson-mmc: sd, retry, rx_phase 3 -> 0
  946. [ 49.139543@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  947. [ 49.139545@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  948. [ 49.139553@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  949. [ 49.139556@3] meson-mmc: retry cmd 13 the 4-th time(s)
  950. [ 49.139558@3] meson-mmc: sd, retry, rx_phase 0 -> 1
  951. [ 49.139576@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  952. [ 49.139577@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  953. [ 49.139586@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  954. [ 49.139588@3] meson-mmc: retry cmd 13 the 3-th time(s)
  955. [ 49.139590@3] meson-mmc: sd, retry, rx_phase 1 -> 2
  956. [ 49.139608@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  957. [ 49.139609@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  958. [ 49.139618@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  959. [ 49.139620@3] meson-mmc: retry cmd 13 the 2-th time(s)
  960. [ 49.139622@3] meson-mmc: sd, retry, rx_phase 2 -> 3
  961. [ 49.139640@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  962. [ 49.139641@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  963. [ 49.139649@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  964. [ 49.139652@3] meson-mmc: retry cmd 13 the 1-th time(s)
  965. [ 49.139654@3] meson-mmc: sd, retry, rx_phase 3 -> 0
  966. [ 49.139672@0] meson-mmc: sd: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  967. [ 49.139674@0] meson-mmc: sd: err: wait for irq service, bus_fsm:0x8
  968. [ 49.139682@3] meson-mmc: meson_mmc_irq_thread 2778 sd: cmd:13
  969. [ 49.139684@3] meson-mmc: Command retried failed line:2898, cmd:13
  970. [ 49.139692@2] mmcblk1: error -110 sending status command, aborting
  971. [ 49.210944@1] mmcblk1: p1 p2
  972. [ 49.875109@1] fsck: Cannot initialize conversion from codepage 850 to ANSI_X3.4-1968: Invalid argument
  973. [ 49.875336@1] fsck: Cannot initialize conversion from ANSI_X3.4-1968 to codepage 850: Invalid argument
  974. [ 49.875462@1] fsck: Using internal CP850 conversion table
  975. [ 49.875561@1] fsck: fsck.fat 4.2 (2021-01-31)
  976. [ 49.875708@1] fsck: /dev/mmcblk1p1: 71 files, 28373/65501 clusters
  977. [ 49.875813@1] fsck: STORAGE: recovering journal
  978. [ 49.875978@1] fsck: STORAGE: clean, 186/7684096 files, 977989/30732288 blocks
  979. [ 50.176470@2] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
  980. [ 50.177056@2] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
  981. [ 50.326983@2] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  982. [ 50.981615@1] kernel-overlays-setup: setup base modules
  983. [ 51.067467@1] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.113
  984. [ 51.127991@1] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  985. [ 51.128258@1] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  986. [ 51.129384@2] kernel-overlays-setup: done
  987. [ 51.387073@1] systemd[1]: System time before build time, advancing clock.
  988. [ 51.390798@1] cgroup: cgroup2: unknown option "nsdelegate"
  989. [ 51.397323@1] systemd[1]: systemd 247.9 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  990. [ 51.398050@1] systemd[1]: Detected architecture arm64.
  991. [ 51.403745@2] systemd[1]: Set hostname to <CoreELEC>.
  992. [ 51.664480@0] systemd[1]: Queued start job for default target Kodi Mediacenter Interface.
  993. [ 51.703624@0] systemd[1]: Created slice Slice /system/modprobe.
  994. [ 51.705017@0] systemd[1]: Created slice User and Session Slice.
  995. [ 51.705459@0] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  996. [ 51.705738@0] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  997. [ 51.706033@0] systemd[1]: Reached target Host and Network Name Lookups.
  998. [ 51.706100@0] systemd[1]: Reached target Paths.
  999. [ 51.706248@0] systemd[1]: Reached target Slices.
  1000. [ 51.720065@1] systemd[1]: Listening on RPCbind Server Activation Socket.
  1001. [ 51.720227@1] systemd[1]: Reached target RPC Port Mapper.
  1002. [ 51.720605@1] systemd[1]: Listening on initctl Compatibility Named Pipe.
  1003. [ 51.721485@1] systemd[1]: Listening on Journal Audit Socket.
  1004. [ 51.722148@1] systemd[1]: Listening on Journal Socket (/dev/log).
  1005. [ 51.722761@1] systemd[1]: Listening on Journal Socket.
  1006. [ 51.723873@1] systemd[1]: Listening on udev Control Socket.
  1007. [ 51.724437@1] systemd[1]: Listening on udev Kernel Socket.
  1008. [ 51.725070@1] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  1009. [ 51.728704@1] systemd[1]: Mounting POSIX Message Queue File System...
  1010. [ 51.733186@1] systemd[1]: Mounting Kernel Debug File System...
  1011. [ 51.737644@1] systemd[1]: Mounting Kernel Trace File System...
  1012. [ 51.742010@1] systemd[1]: Mounting Variable Directory...
  1013. [ 51.747106@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  1014. [ 51.747370@1] systemd[1]: Started Early root shell on /dev/ttyS0 FOR DEBUGGING ONLY.
  1015. [ 51.752554@1] systemd[1]: Starting Create list of static device nodes for the current kernel...
  1016. [ 51.759261@1] systemd[1]: Starting Load Kernel Module configfs...
  1017. [ 51.764473@1] systemd[1]: Starting Load Kernel Module drm...
  1018. [ 51.769042@1] systemd[1]: Starting Load Kernel Module fuse...
  1019. [ 51.774430@1] systemd[1]: Starting Create Persistent Log Directory on /storage and rotate large logs...
  1020. [ 51.779728@1] systemd[1]: Starting Mounting swapfile...
  1021. [ 51.796591@0] systemd[1]: Starting Rebuild Hardware Database...
  1022. [ 51.809999@2] systemd[1]: Starting Load Kernel Modules...
  1023. [ 51.814810@2] systemd[1]: Starting Setup NTP servers for timesyncd...
  1024. [ 51.819629@2] systemd[1]: Starting Coldplug All udev Devices...
  1025. [ 51.824148@2] systemd[1]: Starting Wait for Kernel Time Synchronisation...
  1026. [ 51.834969@2] systemd[1]: Mounted POSIX Message Queue File System.
  1027. [ 51.835869@2] systemd[1]: Mounted Kernel Debug File System.
  1028. [ 51.836724@2] systemd[1]: Mounted Kernel Trace File System.
  1029. [ 51.837932@2] systemd[1]: Mounted Variable Directory.
  1030. [ 51.840310@2] systemd[1]: Finished Create list of static device nodes for the current kernel.
  1031. [ 51.849244@1] systemd[1]: Finished Create Persistent Log Directory on /storage and rotate large logs.
  1032. [ 51.856034@2] systemd[1]: Condition check resulted in Persistent Log Storage being skipped.
  1033. [ 51.951367@3] systemd[1]: Finished Setup NTP servers for timesyncd.
  1034. [ 51.958055@2] systemd[1]: modprobe@configfs.service: Succeeded.
  1035. [ 51.959784@2] systemd[1]: Finished Load Kernel Module configfs.
  1036. [ 51.961552@2] systemd[1]: modprobe@drm.service: Succeeded.
  1037. [ 51.963352@2] systemd[1]: Finished Load Kernel Module drm.
  1038. [ 51.968429@2] systemd[1]: Mounting Kernel Configuration File System...
  1039. [ 51.981303@3] fuse init (API version 7.26)
  1040. [ 51.998566@2] media: Linux media interface: v0.10
  1041. [ 52.034460@2] systemd[1]: modprobe@fuse.service: Succeeded.
  1042. [ 52.035901@2] systemd[1]: Finished Load Kernel Module fuse.
  1043. [ 52.038430@1] Linux video capture interface: v2.00
  1044. [ 52.046131@2] systemd[1]: Mounted Kernel Configuration File System.
  1045. [ 52.072583@2] amlvid:info: amlvideo_init called
  1046. [ 52.072590@2] amlvid:info: amlvideo_create_instance called
  1047. [ 52.072596@2] amlvid:info: v4l2_dev.name=:amlvideo-000
  1048. [ 52.072925@0] amlvideo-000: V4L2 device registered as video10
  1049. [ 52.072931@0] amlvid:info: amlvideo_create_instance called
  1050. [ 52.072948@0] amlvid:info: v4l2_dev.name=:amlvideo-001
  1051. [ 52.073307@0] amlvideo-001: V4L2 device registered as video23
  1052. [ 52.075472@2] systemd[1]: Mounting FUSE Control File System...
  1053. [ 52.084322@0] systemd[1]: Finished Mounting swapfile.
  1054. [ 52.084934@0] systemd[1]: Reached target Swap.
  1055. [ 52.089992@0] systemd[1]: Mounting Temporary Directory (/tmp)...
  1056. [ 52.093322@2] media_clock: loading out-of-tree module taints kernel.
  1057. [ 52.094940@2] register clk_set_setting cpu[33]
  1058. [ 52.095166@0] systemd[1]: Mounted FUSE Control File System.
  1059. [ 52.096657@0] Registered firmware driver success.
  1060. [ 52.097800@0] Try to load video/h264_enc.bin ...
  1061. [ 52.097867@0] load firmware size : 76288, Name : video/h264_enc.bin.
  1062. [ 52.098880@0] Try to load video/video_ucode.bin ...
  1063. [ 52.099978@0] load firmware size : 1459200, Name : video/video_ucode.bin.
  1064. [ 52.138151@0] systemd[1]: Mounted Temporary Directory (/tmp).
  1065. [ 52.138802@0] systemd[1]: Reached target Local File Systems.
  1066. [ 52.140196@2] Amlogic A/V streaming port init
  1067. [ 52.142768@0] systemd[1]: Starting Setup machine-id...
  1068. [ 52.147613@0] get gate demux control ok ffffffc024d12b80
  1069. [ 52.147629@0] get gate parser_top control ok ffffffc024d12c00
  1070. [ 52.147645@0] get gate vdec control ok ffffffc024d12c80
  1071. [ 52.147662@0] get gate clk_81 control ok ffffffc024d12d00
  1072. [ 52.147682@0] get gate clk_vdec_mux control ok ffffffc024d12d80
  1073. [ 52.147705@0] get gate clk_hcodec_mux control ok ffffffc024d12e00
  1074. [ 52.147731@0] get gate clk_hevc_mux control ok ffffffc024d12e80
  1075. [ 52.147739@0] get gate clk_hevcb_mux control failed (null)
  1076. [ 52.147742@0] get gate ahbarb0 control failed (null)
  1077. [ 52.147746@0] get gate asyncfifo control failed (null)
  1078. [ 52.172342@0] amvdec_avs module init
  1079. [ 52.178902@0] systemd[1]: Finished Setup machine-id.
  1080. [ 52.185582@0] systemd[1]: Starting Journal Service...
  1081. [ 52.187203@2] amvdec_h264 module init
  1082. [ 52.190412@0] systemd[1]: Starting Create Static Device Nodes in /dev...
  1083. [ 52.196197@2] amvdec_h265 module init
  1084. [ 52.207340@0] ammvdec_h264 module init
  1085. [ 52.214887@0] ammvdec_mpeg12 module init
  1086. [ 52.217626@0] ammvdec_mpeg4_driver_init_module
  1087. [ 52.257915@0] decoder registered as /dev/video26
  1088. [ 52.262832@0] amvdec_vc1 module init
  1089. [ 52.271693@0] amvdec_vp9 module init
  1090. [ 52.285548@1] Triggered SDIO WiFi power on and bus rescan.
  1091. [ 52.285577@1] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 486
  1092. [ 52.287048@0] systemd[1]: Finished Create Static Device Nodes in /dev.
  1093. [ 52.323944@0] systemd[1]: Finished Coldplug All udev Devices.
  1094. [ 52.397733@0] systemd[1]: Started Journal Service.
  1095. [ 52.418282@2] systemd-journald[2925]: Received client request to flush runtime journal.
  1096. [ 52.621452@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 486
  1097. [ 52.947463@0] meson-mmc: sdio: resp_timeout,vstat:0xa3fda800,virqc:3fff
  1098. [ 52.947470@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  1099. [ 52.947491@3] meson-mmc: meson_mmc_irq_thread 2778 sdio: cmd:8
  1100. [ 52.966165@3] sdio: new high speed SDIO card at address 0001
  1101. [ 52.966174@0] sdio: clock 50000000, 4-bit-bus-width
  1102. [ 52.966174@0]
  1103. [ 52.966576@0] meson-mmc: [sdio_reinit] finish
  1104. [ 53.011128@3] wireguard: WireGuard 1.0.20210219 loaded. See www.wireguard.com for information.
  1105. [ 53.011134@3] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
  1106. [ 54.411055@1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  1107. [ 54.415146@1] fb: osd_release now.index=0,open_count=1
  1108. [ 54.415211@1] Console: switching to colour dummy device 80x25
  1109. [ 54.782534@2] [0]: vcodec_dec decoder ffffffc023ed0000
  1110. [ 54.782839@2] [0]: release decoder ffffffc023ed0000
  1111. [ 55.007890@1] mali-utgard d00c0000.mali: set min pp to default 1
  1112. [ 55.007899@1] mali-utgard d00c0000.mali: set min clk default to 0
  1113. [ 55.008066@1] mali-utgard d00c0000.mali: max clk set 2
  1114. [ 55.008072@1] mali-utgard d00c0000.mali: turbo clk set to 3
  1115. [ 55.031422@3] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-gpufreq-0 failed:-22
  1116. [ 55.031439@3] gpu cooling register okay with err=0
  1117. [ 55.034963@0] gpu core cooling register okay with err=0
  1118. [ 55.035488@0] Mali: Mali device driver loaded
  1119. [ 55.051186@0] eth0: device MAC address 00:15:18:01:81:31
  1120. [ 55.122789@0] internal phy init
  1121. [ 55.199698@0] internal phy init
  1122. [ 55.225812@0] meson6-dwmac c9410000.ethernet eth0: fail to init PTP.
  1123. [ 55.226818@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1124. [ 55.943155@0] RTL871X: module init start
  1125. [ 55.943163@0] RTL871X: rtl8189es v4.3.18.4_22798.20170620
  1126. [ 55.943166@0] ######platform_wifi_power_on:
  1127. [ 55.943192@0] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 486
  1128. [ 56.239313@0] wol_reg12[12]==0, error
  1129. [ 56.462685@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 486
  1130. [ 56.509950@1] Registered IR keymap rc-empty
  1131. [ 56.510320@1] input: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0/input5
  1132. [ 56.510610@1] rc rc0: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0
  1133. [ 56.512901@0] meson-ir c8100580.meson-ir: AO_RTI_PIN_MUX : 0x109801
  1134. [ 56.512915@0] meson-ir c8100580.meson-ir: receiver initialized
  1135. [ 56.518354@1] lirc_dev: IR Remote Control driver registered, major 498
  1136. [ 56.525543@1] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
  1137. [ 56.525553@1] IR LIRC bridge handler initialized
  1138. [ 56.680901@1] IR NEC protocol handler initialized
  1139. [ 56.713663@0] IR RC6 protocol handler initialized
  1140. [ 56.973429@2] sdio_reset_comm():
  1141. [ 56.994888@3] meson-mmc: [sdio_reinit] finish
  1142. [ 57.001143@3] bFWReady == _FALSE call reset 8051...
  1143. [ 57.024970@1] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=5c:ff:ff:82:02:c3
  1144. [ 57.027782@2] RTL871X: module init ret=0
  1145. [ 57.261782@0] meson6-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
  1146. [ 57.401631@1] ==> rtl8188e_iol_efuse_patch
  1147. [ 57.671675@1] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1148. [ 57.671780@0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1149. [ 57.693220@2] 8021q: 802.1Q VLAN Support v1.8
  1150. [ 64.525348@2] fb: mem_free_work, free memory: addr:800000
  1151. [ 119.812242@1] snd_spdif_dai: enterd aml_spdif_play,set_clock:4,sample_rate=4
  1152. [ 119.812263@1] snd_spdif_dai: set 958 audio clk div 2
  1153. [ 119.841146@3] audio_dsp: buf=0
  1154. [ 119.841155@3] audio_dsp: IEC958_mode_raw=0
  1155. [ 119.841197@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
  1156. [ 119.841199@3] audio_dsp: last mode 0,now 0
  1157. [ 119.846965@3] snd_spdif_dai: set normal 512 fs /4 fs
  1158. [ 119.846976@3] snd_spdif_dai: set 958 audio clk div 4
  1159. [ 119.847254@1] snd_spdif_dai: set normal 512 fs /4 fs
  1160. [ 120.039891@3] the demux clock on, ref cnt: 1
  1161. [ 120.039902@3] the parser_top clock on, ref cnt: 1
  1162. [ 120.039906@3] the vdec clock on, ref cnt: 1
  1163. [ 120.039928@3] the clk_hevc_mux clock on, ref cnt: 1
  1164. [ 120.039939@3] hevc mux clock is 500000000 Hz
  1165. [ 120.039967@3] the clk_vdec_mux clock on, ref cnt: 1
  1166. [ 120.039972@3] vdec mux clock is 500000000 Hz
  1167. [ 120.040035@3] vdec_create instance ffffff800e2a0000, total 1
  1168. [ 120.040050@3] vdec_disable_DMC input->target= 0x0
  1169. [ 120.040053@3] vdec_release instance ffffff800e2a0000, total 1
  1170. [ 120.040077@3] the clk_vdec_mux clock off, ref cnt: 0
  1171. [ 120.040081@3] the vdec clock off, ref cnt: 0
  1172. [ 120.040084@3] the parser_top clock off, ref cnt: 0
  1173. [ 120.040087@3] the demux clock off, ref cnt: 0
  1174. [ 120.047111@1] snd_spdif_dai: enterd aml_spdif_play,set_clock:5,sample_rate=4
  1175. [ 120.047132@1] snd_spdif_dai: set 958 audio clk div 2
  1176. [ 120.054076@2] fb: osd_release now.index=0,open_count=1
  1177. [ 120.078887@1] audio_dsp: buf=0
  1178. [ 120.078895@1] audio_dsp: IEC958_mode_raw=0
  1179. [ 120.078928@1] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
  1180. [ 120.078930@1] audio_dsp: last mode 0,now 0
  1181. [ 120.084927@1] snd_spdif_dai: set normal 512 fs /4 fs
  1182. [ 120.084935@1] snd_spdif_dai: set 958 audio clk div 4
  1183. [ 120.085234@2] snd_spdif_dai: set normal 512 fs /4 fs
  1184. [ 120.101546@1] snd_spdif_dai: enterd aml_spdif_play,set_clock:5,sample_rate=4
  1185. [ 120.101566@1] snd_spdif_dai: set 958 audio clk div 2
  1186. [ 120.133518@1] audio_dsp: buf=0
  1187. [ 120.133527@1] audio_dsp: IEC958_mode_raw=0
  1188. [ 120.133564@1] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
  1189. [ 120.133566@1] audio_dsp: last mode 0,now 0
  1190. [ 120.139421@1] snd_spdif_dai: set normal 512 fs /4 fs
  1191. [ 120.139431@1] snd_spdif_dai: set 958 audio clk div 4
  1192. [ 120.139680@1] snd_spdif_dai: set normal 512 fs /4 fs
  1193.  
Add Comment
Please, Sign In to add comment