API tools faq
paste
Guest User

Untitled

a guest
Sep 19th, 2017
524
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.75 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.11-rt19 (repowrt-builder@9c0b3ba154ab) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r49389) ) #1 SMP PREEMPT Thu Mar 9 02:50:43 UTC 2017
  4. [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: BCM963138
  7. [ 0.000000] Prozone memory from command line 1ffe0000
  8. [ 0.000000] bootconsole [earlycon0] enabled
  9. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  10. [ 0.000000] creating a MT_MEMORY_NONCACHED device at physical address of 0x1ffc0000 to virtual address at 0xdffc0000 with size of 0x40000 byte for TCH_RESERVED
  11. [ 0.000000] creating a MT_MEMORY_NONCACHED device at physical address of 0x0fe00000 to virtual address at 0xcfe00000 with size of 0x200000 byte for DSL
  12. [ 0.000000] creating a MT_MEMORY_NONCACHED device at physical address of 0x0ea00000 to virtual address at 0xcea00000 with size of 0x1400000 byte for RDPA tm
  13. [ 0.000000] creating a MT_MEMORY_NONCACHED device at physical address of 0x0e600000 to virtual address at 0xce600000 with size of 0x400000 byte for RDPA mc
  14. [ 0.000000] On node 0 totalpages: 123904
  15. [ 0.000000] free_area_init_node: node 0, pgdat c0479c80, node_mem_map c1000000
  16. [ 0.000000] DMA zone: 32 pages used for memmap
  17. [ 0.000000] DMA zone: 0 pages reserved
  18. [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
  19. [ 0.000000] Normal zone: 992 pages used for memmap
  20. [ 0.000000] Normal zone: 118816 pages, LIFO batch:31
  21. [ 0.000000] pmc_init:PMC using DQM mode
  22. [ 0.000000] pmc_init:35 33b033c 4b004b
  23. [ 0.000000] L310 cache controller enabled
  24. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x6a450000, Cache size: 524288 B
  25. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1405000 s5568 r8192 d14912 u32768
  26. [ 0.000000] pcpu-alloc: s5568 r8192 d14912 u32768 alloc=8*4096
  27. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  28. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 122880
  29. [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk debug root=/dev/mtdblock1 rootfstype=squashfs tbbt_addr=0xfaa0000 btab=0xa180c btab_bootid=2 bl_version=16.11.1013-0000000-20160314084347-870409210027d7bcfa4d54666160c0bb5322e291 board=VBNT-K platform.prozone_addr=0x1ffe0000 bl_oid=unofficialbuildOID0000 .r2secr=0x1ffdf000 <
  30. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  31. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  32. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  33. [ 0.000000] allocated 1048576 bytes of page_cgroup
  34. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  35. [ 0.000000] Memory: 230MB 254MB = 484MB total
  36. [ 0.000000] Memory: 485156k/485156k available, 39132k reserved, 0K highmem
  37. [ 0.000000] Virtual kernel memory layout:
  38. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  39. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  40. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  41. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  42. [ 0.000000] modules : 0xbec00000 - 0xc0000000 ( 20 MB)
  43. [ 0.000000] .text : 0xc0008000 - 0xc041bbf0 (4175 kB)
  44. [ 0.000000] .init : 0xc041c000 - 0xc043c5c0 ( 130 kB)
  45. [ 0.000000] .data : 0xc043e000 - 0xc047a800 ( 242 kB)
  46. [ 0.000000] .bss : 0xc047a824 - 0xc04bac00 ( 257 kB)
  47. [ 0.000000] Preemptible hierarchical RCU implementation.
  48. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
  49. [ 0.000000] NR_IRQS:256
  50. [ 0.000000] Cortex A9 MPCORE GIC init
  51. [ 0.000000] DIST at fc01f000, CPU_IF at fc01e100
  52. [ 0.000000] map_hw_timer_interrupt,132: interrupt_id 96
  53. [ 0.000000] map_hw_timer_interrupt,132: interrupt_id 97
  54. [ 0.000000] map_hw_timer_interrupt,132: interrupt_id 98
  55. [ 0.000000] map_hw_timer_interrupt,132: interrupt_id 99
  56. [ 0.000000] sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 4294967295ms
  57. [ 0.000000] console [ttyS0] enabled, bootconsole disabled
  58. [ 0.002000] Calibrating delay loop... 1990.65 BogoMIPS (lpj=995328)
  59. [ 0.011000] pid_max: default: 32768 minimum: 301
  60. [ 0.012000] Mount-cache hash table entries: 512
  61. [ 0.013000] --Kernel Config--
  62. [ 0.014000] SMP=1
  63. [ 0.015000] PREEMPT=1
  64. [ 0.016000] DEBUG_SPINLOCK=0
  65. [ 0.017000] DEBUG_MUTEXES=0
  66. [ 0.018000] Initializing cgroup subsys debug
  67. [ 0.019000] Initializing cgroup subsys memory
  68. [ 0.020000] Initializing cgroup subsys blkio
  69. [ 0.021000] CPU: Testing write buffer coherency: ok
  70. [ 0.022000] Broadcom Logger v0.1 Mar 9 2017 02:45:57
  71. [ 0.036000] Setting up static identity map for 0x313be0 - 0x313c14
  72. [ 0.047000] CPU1: Booted secondary processor
  73. [ 0.055000] CPU1: Unknown IPI message 0x1
  74. [ 0.055000] Brought up 2 CPUs
  75. [ 0.055000] SMP: Total of 2 processors activated (3981.31 BogoMIPS).
  76. [ 0.072000] NET: Registered protocol family 16
  77. [ 0.074000] ++++ Powering up USB blocks
  78. [ 0.105000] gpiochip_add: registered GPIOs 0 to 159 on device: bcm963xx-gpio
  79. [ 0.129000] bcm63xx_pcie: setting resistor calibration value to 0x8
  80. [ 0.135000] bcm63xx_pcie: applying serdes parameters
  81. [ 0.699000] PCIE port 0 link-up
  82. [ 0.700000] PCI host bridge to bus 0000:00
  83. [ 0.701000] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]
  84. [ 0.702000] pci 0000:00:00.0: [14e4:6313] type 01 class 0x060400
  85. [ 0.703000] pci 0000:00:00.0: PME# supported from D0 D3hot
  86. [ 0.704000] PCI: bus0: Fast back to back transfers disabled
  87. [ 0.706000] pci 0000:01:00.0: [14e4:a8db] type 00 class 0x028000
  88. [ 0.707000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00007fff 64bit]
  89. [ 0.709000] pci 0000:01:00.0: supports D1 D2
  90. [ 0.712000] PCI: bus1: Fast back to back transfers disabled
  91. [ 0.713000] pci 0000:00:00.0: BAR 8: assigned [mem 0x90000000-0x900fffff]
  92. [ 0.714000] pci 0000:01:00.0: BAR 0: assigned [mem 0x90000000-0x90007fff 64bit]
  93. [ 0.715000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
  94. [ 0.716000] pci 0000:00:00.0: bridge window [mem 0x90000000-0x900fffff]
  95. [ 0.717000] PCI: enabling device 0000:00:00.0 (0140 -> 0143)
  96. [ 0.741000] bcm63xx_pcie: setting resistor calibration value to 0x8
  97. [ 0.747000] bcm63xx_pcie: applying serdes parameters
  98. [ 1.311000] PCIE port 1 power-down
  99. [ 1.827000] bio: create slab <bio-0> at 0
  100. [ 1.829000] SCSI subsystem initialized
  101. [ 1.830000] usbcore: registered new interface driver usbfs
  102. [ 1.832000] usbcore: registered new interface driver hub
  103. [ 1.833000] usbcore: registered new device driver usb
  104. [ 1.834000] bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated
  105. [ 1.835000] skbFreeTask created successfully
  106. [ 1.836000] BLOG v3.0 Initialized
  107. [ 1.837000] BLOG Rule v1.0 Initialized
  108. [ 1.838000] Broadcom IQoS v0.1 Mar 9 2017 02:49:15 initialized
  109. [ 1.839000] Broadcom GBPM v0.1 Mar 9 2017 02:49:15 initialized
  110. [ 1.840000] NET: Registered protocol family 8
  111. [ 1.841000] NET: Registered protocol family 20
  112. [ 1.842000] Switching to clocksource timer_cs
  113. [ 1.845000] NET: Registered protocol family 2
  114. [ 1.846000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  115. [ 1.848000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  116. [ 1.849000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  117. [ 1.850000] TCP: Hash tables configured (established 16384 bind 16384)
  118. [ 1.851000] TCP: reno registered
  119. [ 1.852000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  120. [ 1.853000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  121. [ 1.854000] NET: Registered protocol family 1
  122. [ 1.856000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  123. [ 1.857000] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
  124. [ 1.858000] fuse init (API version 7.18)
  125. [ 1.859000] msgmni has been set to 947
  126. [ 1.860000] io scheduler noop registered (default)
  127. [ 1.862000] Broadcom NAND controller (BrcmNand Controller)
  128. [ 1.863000] mtd->oobsize=0, mtd->eccOobSize=0
  129. [ 1.864000] NAND_CS_NAND_XOR=00000000
  130. [ 1.865000] Disabling XOR: Before: SEL=40000001, XOR=00000000
  131. [ 1.866000] Disabling XOR: After: SEL=40000000, XOR=00000000
  132. [ 1.867000] B4: NandSelect=40000000, nandConfig=26152300, chipSelect=0
  133. [ 1.868000] brcmnand_read_id: CS0: dev_id=2cda9095
  134. [ 1.869000] After: NandSelect=00000000, nandConfig=26152300
  135. [ 1.870000] Block size=00020000, erase shift=17
  136. [ 1.871000] NAND Config: Reg=26152300, chipSize=256 MB, blockSize=128K, erase_shift=11
  137. [ 1.872000] busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
  138. [ 1.873000] timing1 not adjusted: 65644458
  139. [ 1.874000] timing2 not adjusted: 80000e56
  140. [ 1.875000] BrcmNAND mfg 2c da MICRON MT29F2G08ABA 256MB on CS0
  141. [ 1.876000]
  142. [ 1.876000] Found NAND on CS0: ACC=c3040010, cfg=26152300, flashId=2cda9095, tim1=65644458, tim2=80000e56
  143. [ 1.877000] BrcmNAND version = 0x80000700 256MB @00000000
  144. [ 1.878000] brcmnand_scan: B4 nand_select = 00000000
  145. [ 1.879000] brcmnand_scan: After nand_select = 00000000
  146. [ 1.880000] handle_acc_control: default CORR ERR threshold 3 bits
  147. [ 1.881000] ACC: 16 OOB bytes per 512B ECC step; from ID probe: 16
  148. [ 1.882000] page_shift=11, bbt_erase_shift=17, chip_shift=28, phys_erase_shift=17
  149. [ 1.883000] Brcm NAND controller version = 7.0 NAND flash size 256MB @10000000
  150. [ 1.884000] ECC layout=brcmnand_oob_bch4_2k
  151. [ 1.885000] brcmnand_scan: mtd->oobsize=64
  152. [ 1.886000] brcmnand_scan: oobavail=35, eccsize=512, writesize=2048
  153. [ 1.887000] brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=4, eccbytes=7
  154. [ 1.888000] Gateway flash mapping
  155. [ 1.889000] brcmnand_reset_corr_threshold: default CORR ERR threshold 3 bits for CS0
  156. [ 1.893000] [NAND] : tBBT loaded
  157. [ 1.893000]
  158. [ 1.894000] Technicolor nand flash translation layer initialized.
  159. [ 1.895000] flash mapping initialized, size=250 Mb
  160. [ 1.897000] parse_btab: num_banks (5)
  161. [ 1.899000] Creating 1 MTD partitions on "technicolor-nand-tl":
  162. [ 1.900000] 0x00000ac00000-0x00000d860000 : "rootfs"
  163. [ 1.902000] Creating 5 MTD partitions on "technicolor-nand-tl":
  164. [ 1.903000] 0x0000000e0000-0x000005a00000 : "rootfs_data"
  165. [ 1.904000] 0x000005a00000-0x00000aa00000 : "bank_1"
  166. [ 1.905000] 0x00000aa00000-0x00000fa00000 : "bank_2"
  167. [ 1.907000] 0x000000080000-0x0000000a0000 : "eripv2"
  168. [ 1.909000] 0x0000000a0000-0x0000000e0000 : "rawstorage"
  169. [ 1.911000] PPP generic driver version 2.4.2
  170. [ 1.912000] PPP BSD Compression module registered
  171. [ 1.913000] PPP Deflate Compression module registered
  172. [ 1.914000] NET: Registered protocol family 24
  173. [ 1.915000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  174. [ 1.916000] ehci-platform ehci-platform.0: Generic Platform EHCI Controller
  175. [ 1.917000] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
  176. [ 1.918000] ehci-platform ehci-platform.0: irq 105, io mem 0x8000c300
  177. [ 1.925000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
  178. [ 1.927000] hub 1-0:1.0: USB hub found
  179. [ 1.928000] hub 1-0:1.0: 2 ports detected
  180. [ 1.930000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  181. [ 1.931000] ohci-platform ohci-platform.0: Generic Platform OHCI Controller
  182. [ 1.932000] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
  183. [ 1.933000] ohci-platform ohci-platform.0: irq 104, io mem 0x8000c400
  184. [ 1.989000] hub 2-0:1.0: USB hub found
  185. [ 1.990000] hub 2-0:1.0: 2 ports detected
  186. [ 1.991000] brcmboard: brcm_board_init entry
  187. [ 2.026000] DYING GASP IRQ initialized
  188. [ 2.027000] Serial: BCM63XX driver $Revision: 3.00 $
  189. [ 2.028000] Magic SysRq with Auxilliary trigger char enabled (type ^ h for list of supported commands)
  190. [ 2.030000] ttyS0 at MMIO 0xfffe8600 (irq = 64) is a BCM63XX
  191. [ 2.031000] ttyS1 at MMIO 0xfffe8620 (irq = 65) is a BCM63XX
  192. [ 2.032000] BPM: tot_mem_size=536870912B (512MB), buf_mem_size <20%> =107374180B (102MB), num of buffers=41425, buf size=2592
  193. [ 2.035000] Broadcom BPM Module Char Driver v0.1 Mar 9 2017 02:48:22 Registered<244>
  194. [ 2.037000] GACT probability NOT on
  195. [ 2.038000] Mirror/redirect action on
  196. [ 2.039000] u32 classifier
  197. [ 2.040000] input device check on
  198. [ 2.041000] Actions configured
  199. [ 2.042000] TCP: cubic registered
  200. [ 2.043000] NET: Registered protocol family 10
  201. [ 2.044000] IPv6 over IPv4 tunneling driver
  202. [ 2.046000] NET: Registered protocol family 17
  203. [ 2.047000] Bridge firewalling registered
  204. [ 2.048000] Initializing MCPD Module
  205. [ 2.049000] Ebtables v2.0 registered
  206. [ 2.050000] ebt_time registered
  207. [ 2.051000] ebt_ftos registered
  208. [ 2.052000] 8021q: 802.1Q VLAN Support v1.8
  209. [ 2.063000] VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
  210. [ 2.064000] Freeing init memory: 128K
  211. [ 3.995000] init: Console is alive
  212. [ 8.910000] Button Hotplug driver version 0.4.1
  213. [ 8.935000] Initializing USB Mass Storage driver...
  214. [ 8.940000] usbcore: registered new interface driver usb-storage
  215. [ 8.946000] USB Mass Storage support registered.
  216. [ 8.962000] init: - preinit -
  217. [ 14.359000] jffs2: notice: (246) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 889 of xref (0 dead, 842 orphan) found.
  218. [ 14.418000] insmod: module is already loaded - bankmgr
  219. [ 17.437000] tommath: module license 'unspecified' taints kernel.
  220. [ 17.442000] Disabling lock debugging due to kernel taint
  221. [ 17.537000] eRIPv2 secrets passed correctly to Linux
  222. [ 17.857000] procd: - early -
  223. [ 18.415000] procd: - watchdog -
  224. [ 18.416000] procd: - ubus -
  225. [ 18.570000] procd: - init -
  226. [ 22.978000] ddr_tm_base_address 0xcea00000, size 20971520/20971520, ddr_tm_base_address_phys 0x0ea00000
  227. [ 22.987000] ddr_multicast_base_address 0xce600000, size 4194304/4194304, ddr_multicast_base_address_phys 0x0e600000
  228. [ 23.044000] ++++Runner gso_desc_pool created successfully
  229. [ 23.719000] RDPA Speed Service Command Driver
  230. [ 23.723000] RDPA DS WAN UDP Filter Command Driver
  231. [ 23.917000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
  232. [ 23.934000] Initializing XFRM netlink socket
  233. [ 23.939000] NET: Registered protocol family 15
  234. [ 23.944000] IPv4 over IPv4 tunneling driver
  235. [ 23.960000] L2TP core: blog_l2tp_rcv_check
  236. [ 23.964000] L2TP core driver, V2.0
  237. [ 23.969000] L2TP netlink interface
  238. [ 23.977000] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
  239. [ 23.990000] gre: GRE over IPv4 demultiplexor driver
  240. [ 23.996000] ip_gre: GRE over IPv4 tunneling driver
  241. [ 24.145000] ip6_gre: GRE over IPv6 tunneling driver
  242. [ 24.152000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  243. [ 24.173000] ncr_master_key_set_internal
  244. [ 24.178000] ncr: driver 0.2-mr1 loaded.
  245. [ 24.188000] Netfilter messages via NETLINK v0.30.
  246. [ 24.195000] ip_set: protocol 6
  247. [ 24.217000] brcmchipinfo: brcm_chipinfo_init entry
  248. [ 24.222000] brcm_otp_init entry
  249. [ 24.226000] bcmxtmrt: Broadcom BCM3138B0 ATM/PTM Network Device v0.7 Mar 9 2017 00:43:15
  250. [ 24.234000]
  251. [ 24.234000] bcmxtmrt :- gulXtmRdpPadWorkaround = 0, &gulXtmRdpPadWorkaround = bef3887c
  252. [ 24.244000]
  253. [ 24.244000] bcmxtmrt :- gulXtmRdpAlignWorkaround = 0, &gulXtmRdpAlignWorkaround = bef38880
  254. [ 24.254000]
  255. [ 24.254000] bcmxtmrt :- gulXtmRdpHdRoomWorkaround = 1, &gulXtmRdpHdRoomWorkaround = bef38884
  256. [ 24.264000] Creating CPU ring for queue number 5 with 256 packets descriptor=0xbedaa85c
  257. [ 24.264000] Done initializing Ring 5 Base=0xffdf6000 End=0xffdf7000 calculated entries= 256 RDD Base=0x00c06000 descriptor=0xbedaa85c
  258. [ 24.285000] Creating CPU ring for queue number 6 with 256 packets descriptor=0xbedaa888
  259. [ 24.285000] Done initializing Ring 6 Base=0xffdee000 End=0xffdef000 calculated entries= 256 RDD Base=0x00c0c000 descriptor=0xbedaa888
  260. [ 24.363000] OSCK LOADED!
  261. [ 24.367000] Broadcom Ingress QoS Module Char Driver v0.1 Mar 9 2017 00:40:13 Registered<243>
  262. [ 24.376000]
  263. [ 24.376000] Broadcom Ingress QoS ver 0.1 initialized
  264. [ 24.385000] NBUFF v1.0 Initialized
  265. [ 24.396000] Initialized fcache state
  266. [ 24.400000] Broadcom Packet Flow Cache Char Driver v2.2 Mar 9 2017 00:40:14 Registered<242>
  267. [ 24.410000] Created Proc FS /procfs/fcache
  268. [ 24.414000] Broadcom Packet Flow Cache registered with netdev chain
  269. [ 24.422000] Broadcom Packet Flow Cache learning via BLOG enabled.
  270. [ 24.429000] [FHW] pktDbgLvl[0xbef695c4]=0
  271. [ 24.435000] [FHW] fhw_construct: 
  272. [ 24.439000] Initialized Fcache HW accelerator layer state
  273. [ 24.446000] flwStatsThread created
  274. [ 24.451000] Constructed Broadcom Packet Flow Cache v2.2 Mar 9 2017 00:40:14
  275. [ 24.460000] Initialized Runner Unicast Layer
  276. [ 24.464000] Initialized Runner Multicast Layer
  277. [ 24.470000] Broadcom Packet Flow Cache HW acceleration enabled.
  278. [ 24.477000] Enabled Runner binding to Flow Cache
  279. [ 24.488000] Initialized Runner Protocol Layer (700)
  280. [ 24.492000] Broadcom Runner Blog Driver Char Driver v0.1 Mar 9 2017 00:40:15 Registered <252>
  281. [ 24.515000] pmc_switch_power_up: Rgmii Tx clock zone1 enable 1 zone2 enable 0.
  282. [ 24.533000]
  283. [ 24.533000] LINK DOWN IMP Port
  284. [ 24.539000] Runner Port#0 (Internal MUX Port#2) connects to Crossbar Port#1
  285. [ 24.545000] Switch Port#3 (Internal MUX Port#0) connects to Crossbar Port#4
  286. [ 24.552000] Unused MUX Internal Port#1 connects to Crossbar External Port#0
  287. [ 24.560000] Cross Bar MUX Config : Internal Port 00 maps to External Port 04 <reg_val : 0x0000000c>
  288. [ 24.569000] Cross Bar MUX Config : Internal Port 01 maps to External Port 00 <reg_val : 0x00000004>
  289. [ 24.578000] Cross Bar MUX Config : Internal Port 02 maps to External Port 01 <reg_val : 0x00000044>
  290. [ 24.588000] Broadcom BCM63138B0 Ethernet Network Device v0.1 Mar 9 2017 00:43:08
  291. [ 24.596000] dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
  292. [ 24.675000] eth0: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008 : 0x08> MAC : 10:13:31:71:B9:DE
  293. [ 24.757000] eth1: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009 : 0x09> MAC : 10:13:31:71:B9:DE
  294. [ 24.822000] eth2: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a : 0x0a> MAC : 10:13:31:71:B9:DE
  295. [ 24.887000] eth3: <Ext sw port: 3> <Logical : 11> PHY_ID <0x0007f00b : 0x0b> MAC : 10:13:31:71:B9:DE
  296. [ 24.896000] ++++ disabling GSO on logical_port=0 dev=eth4
  297. [ 24.903000] eth4: <Int sw port: 0> <Logical : 00> PHY_ID <0x0007f04c : 0x0c> MAC : 10:13:31:71:B9:DE
  298. [ 24.918000] eth5: <Ext sw port: 5> <Logical : 13> PHY_ID <0x02600e00 : 0x00> MAC : 10:13:31:71:B9:DE
  299. [ 24.928000] Ethernet Auto Power Down and Sleep: Enabled
  300. [ 24.933000] Cross bar port 1 of Int switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00
  301. [ 24.942000] Ext switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00
  302. [ 24.950000] Ext switch port 1; Adv capability change : MII=0x01e1, GMII=0x0f00
  303. [ 24.957000] Ext switch port 2; Adv capability change : MII=0x01e1, GMII=0x0f00
  304. [ 24.965000] Cross bar port 4 of Ext switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
  305. [ 24.975000] Chip WAN Only Port 00000001, Defined WAN Only Port 00000000, WAN Only Port Result: 0x00000001
  306. [ 24.984000] Chip WAN Preffered Port 00000000, Defined WAN Preffered Port 00000000, WAN Preffered Port Result: 0x00000000
  307. [ 24.995000] Chip LAN Only Port 00002f00, Defined LAN Only Port 00000000, LAN Only Port Result: 0x00002f00
  308. [ 25.006000] Creating CPU ring for queue number 4 with 512 packets descriptor=0xbedaa830
  309. [ 25.006000] Done initializing Ring 4 Base=0xffde8000 End=0xffdea000 calculated entries= 512 RDD Base=0x00c10000 descriptor=0xbedaa830
  310. [ 25.026000] Creating CPU ring for queue number 3 with 512 packets descriptor=0xbedaa804
  311. [ 25.026000] Done initializing Ring 3 Base=0xffde4000 End=0xffde6000 calculated entries= 512 RDD Base=0x00c14000 descriptor=0xbedaa804
  312. [ 25.050000] Broadcom 802.1Q VLAN Interface, v0.1
  313. [ 25.056000] Wifi Forwarding Driver is initialized!
  314. [ 27.274000] --SMP support
  315. [ 27.276000] wl: dsl_tx_pkt_flush_len=338
  316. [ 27.280000] wl: norm_wmark_tot=26926, pktc_wmark_tot=26926
  317. [ 27.288000] PCI: enabling device 0000:01:00.0 (0140 -> 0142)
  318. [ 27.293000] wl: passivemode=1
  319. [ 27.296000] wl0: creating kthread wl0-kthrd
  320. [ 27.303000] wl: napimode=0
  321. [ 27.320000] initvars_cis_pci: Not CIS format
  322. [ 27.324000] Neither SPROM nor OTP has valid image
  323. [ 27.329000] wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
  324. [ 27.337000] wl: ID=pci/0/0/0/
  325. [ 27.340000] wl: ID=pci/0/0/0/
  326. [ 27.365000] wl: loading /etc/wlan/bcm43217_map.bin
  327. [ 27.369000] srom rev:8
  328. [ 27.373000] wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=20
  329. [ 27.403000] wl0: allocskbmode=1 currallocskbsz=1024
  330. [ 27.409000] Creating CPU ring for queue number 0 with 1024 packets descriptor=0xbefc00d4
  331. [ 27.409000]  wfd_bind: Dev wl%d wfd_idx 0 Type skb configured WFD thread wfd0-thrd RxQId (8), status (0) number_of_queues 1 qmask 0x1
  332. [ 27.431000] Instantiating WFD 0 thread
  333. [ 27.435000] wl0: Broadcom BCM43227 802.11 Wireless Controller 7.14.89.14.cpe4.16L03.0-kdb
  334. [ 27.443000] dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
  335. [ 27.454000] bcmxtmcfg: bcmxtmcfg_init entry
  336. [ 27.470000] adsl: adsl_init entry
  337. [ 27.477000] Loading DECT Shim driver
  338. [ 27.480000] Initialize DECT Shim layer....
  339. [ 27.485000] Obtained board id string (VBNT-K)
  340. [ 27.489000] Obtained Base board id string (VBNT-K)Successfully obtained voice parameters
  341. [ 27.498000] DECT is disabled by OTP/boardparms or is initialized already
  342. [ 27.505000] Loading PCM shim driver
  343. [ 27.518000] ufsd: trace mask set to 0000000f
  344. [ 27.522000] ufsd: driver (8.6, Mar 9 2017 02:21:39, LBD=ON, delalloc, ioctl, rwm, tr) loaded at bf489000
  345. [ 27.522000] NTFS support included
  346. [ 27.522000] Hfs+/HfsX support included
  347. [ 27.522000] optimized: size
  348. [ 27.564000] dgasp: kerSysRegisterDyingGaspHandler: prozone registered
  349. [ 27.571000] Could not access blversion MTD partition
  350. [ 27.583000] usbcore: registered new interface driver cdc_acm
  351. [ 27.588000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  352. [ 27.598000] usbcore: registered new interface driver cdc_wdm
  353. [ 27.607000] ip_tables: (C) 2000-2006 Netfilter Core Team
  354. [ 27.615000] PPPoL2TP kernel driver, V2.0
  355. [ 27.622000] nf_conntrack version 0.5.0 (7582 buckets, 30328 max)
  356. [ 27.638000] ctnetlink v0.93: registering with nfnetlink.
  357. [ 27.645000] nf_conntrack_rtsp v0.7 loading
  358. [ 27.652000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  359. [ 27.659000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  360. [ 27.666000] Could not access blversion MTD partition
  361. [ 27.679000] usbcore: registered new interface driver usbserial
  362. [ 27.684000] usbserial: USB Serial Driver core
  363. [ 27.711000] xt_time: kernel timezone is -0000
  364. [ 27.716000] usbcore: registered new interface driver cdc_ether
  365. [ 27.722000] usbcore: registered new interface driver cdc_ncm
  366. [ 27.728000] usbcore: registered new interface driver huawei_cdc_ncm
  367. [ 27.744000] nf_nat_rtsp v0.7 loading
  368. [ 27.751000] Could not access blversion MTD partition
  369. [ 27.759000] usbcore: registered new interface driver qmi_wwan
  370. [ 27.770000] usbcore: registered new interface driver option
  371. [ 27.775000] USB Serial support registered for GSM modem (1-port)
  372. [ 27.782000] Could not access blversion MTD partition
  373. [ 27.792000] usbcore: registered new interface driver qcserial
  374. [ 27.797000] USB Serial support registered for Qualcomm USB modem
  375. [ 27.804000] Could not access blversion MTD partition
  376. [ 30.475000] Registered led device: power:green
  377. [ 30.479000] Registered led device: power:red
  378. [ 30.484000] Registered led device: power:blue
  379. [ 30.488000] Registered led device: broadband:green
  380. [ 30.493000] Registered led device: dect:green
  381. [ 30.498000] Registered led device: dect:red
  382. [ 30.502000] Registered led device: ethernet:green
  383. [ 30.507000] Registered led device: iptv:green
  384. [ 30.511000] Registered led device: wireless:green
  385. [ 30.516000] Registered led device: wireless_5g:green
  386. [ 30.521000] Registered led device: internet:green
  387. [ 30.526000] Registered led device: internet:red
  388. [ 30.531000] Registered led device: voip:green
  389. [ 30.535000] Registered led device: wps:green
  390. [ 30.540000] Registered led device: wps:red
  391. [ 30.544000] Registered led device: wps:orange
  392. [ 30.548000] Registered led device: power:orange
  393. [ 30.553000] Registered led device: internet:orange
  394. [ 30.558000] Registered led device: dect:orange
  395. [ 32.264000] eth5 (Ext switch port: 5) (Logical Port: 13) Link UP 1000 mbps full duplex
  396. [ 32.275000] Ethernet Auto Power Down and Sleep: Enabled
  397. [ 32.286000] Energy Efficient Ethernet: Enabled
  398. [ 32.867000] monitor task is initialized pid= 1905
  399. [ 33.802000] bcmxtmcfg: ChipId Rev-b0
  400. [ 33.805000] bcmxtmcfg: DS xDSL G.inp Mode = DISABLED
  401. [ 33.811000] bcmxtmcfg: xDSL G.Fast Mode = DISABLED
  402. [ 33.816000] bcmxtmrt: PTM/ATM Non-Bonding Mode configured in system
  403. [ 33.824000] bcmxtmcfg: Out of sequence call to XTM_ASM_HANDLER::Uninitialize(). Recovering.
  404. [ 33.832000] bcmxtmcfg: ATM Bonding configured in system. Fallback mode = Enabled
  405. [ 33.840000] bcmxtmcfg: Bonding State is DATA_IDLE
  406. [ 33.845000] bcmxtmcfg: SID MODE SET to 12 BIT MODE
  407. [ 33.850000] bcmxtmcfg: ATM Bonding Mgmt Log Area = d8afbd18
  408. [ 33.855000] bcmxtmcfg: gulXtmMonitorValid(0xbf3dee44) = 1
  409. [ 33.984000] bcmxtmrt: TxPAF Status = Disabled
  410. [ 33.988000] bcmxtmrt: MAC address: 10 13 31 71 b9 de
  411. [ 33.993000] [DoCreateDeviceReq.775]: register_netdev
  412. [ 33.999000] [DoCreateDeviceReq.780]: register_netdev done
  413. [ 34.186000] bcmxtmrt: TxPAF Status = Disabled
  414. [ 34.190000] bcmxtmrt: MAC address: 10 13 31 71 b9 de
  415. [ 34.195000] [DoCreateDeviceReq.775]: register_netdev
  416. [ 34.201000] [DoCreateDeviceReq.780]: register_netdev done
  417. [ 36.186000] wl_event_open
  418. [ 36.188000] wl_event_open COMPLETED
  419. [ 38.580000] *** dslThread dslPid=2228
  420. [ 38.583000] BcmAdsl_Initialize=0xBF3EC028, g_pFnNotifyCallback=0xBF42413C
  421. [ 38.590000] AdslCoreSetSDRAMBaseAddr: pAddr=0x0FE00000 sdramPageAddr=0xCFE00000
  422. [ 38.663000] BcmAdslCoreCalibrate: (cnt1-cnt)=0x03937b0e, adslCoreCyclesPerMs=999949, BCMOS_MSEC_PER_TICK =1
  423. [ 38.966000] AdslCoreSetSdramImageAddr: lmem2=0x10010000, pgSize=0x0 sdramSize=0x11F758
  424. [ 38.973000] AdslCoreSetSdramImageAddr: lmem2(0x10000) vs ADSL_PHY_SDRAM_BIAS(0x10000); origAddr=0xCFE10000 newAddr=0xCFE10000
  425. [ 38.985000] pSdramPHY=0xCFFFFFF8, 0x1B79A4 0xDEADBEEF
  426. [ 38.990000] AdslCoreSetSdramImageAddr: sdramPageAddr=0xcfe00000, sdramImageAddr=0xcfe10000, sdramPhyImageAddr=0x10010000
  427. [ 39.001000] *** AdslCoreSetXfaceOffset: data[0]=0xFFF9006F data[1]=0x6FF90 ***
  428. [ 39.009000] *** XfaceOffset: 0x6FF90 => 0x6FF90 ***
  429. [ 40.019000] *** AdslCoreSetSdramTrueSize: data[0]=0x74CE7FF data[1]=0xF8B31800 ***
  430. [ 40.026000] *** AdslCoreSetSdramTrueSize: data[0]=0xFFE74C07 data[1]=0x18B3F8 ***
  431. [ 40.036000] *** PhySdramSize got adjusted: 0x11F758 => 0x18B3F8 ***
  432. [ 40.041000] AdslCoreSharedMemInit: shareMemSize=412640(412640)
  433. [ 40.049000] __AdslCoreHwReset: pAdslX=0xfc76ff90
  434. [ 40.053000] __AdslCoreHwReset: pAdslX->sdramBaseAddr=0x0000e1af, pAdslX->gfcTable[]=0x0000e1cf, adslCorePhyDesc.sdramImageAddr=0xcfe10000
  435. [ 40.078000] AdslCoreHwReset: pLocSbSta=d4cf8000 bkupThreshold=3072
  436. [ 40.084000] AdslCoreHwReset: AdslOemDataAddr = 0xCFF0F9C4, time=15 ms
  437. [ 40.090000] VersionInfo: A2pvbH042r.d26m
  438. [ 40.094000] ***BcmDiagsMgrRegisterClient: 0 ***
  439. [ 40.099000] dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
  440. [ 42.812000] ADDRCONF(NETDEV_UP): eth0: link is not ready
  441. [ 42.821000] device eth0 entered promiscuous mode
  442. [ 42.844000] ADDRCONF(NETDEV_UP): br-lan: link is not ready
  443. [ 42.853000] ADDRCONF(NETDEV_UP): eth1: link is not ready
  444. [ 42.858000] device eth1 entered promiscuous mode
  445. [ 42.867000] ADDRCONF(NETDEV_UP): eth2: link is not ready
  446. [ 42.872000] device eth2 entered promiscuous mode
  447. [ 42.880000] ADDRCONF(NETDEV_UP): eth3: link is not ready
  448. [ 42.885000] device eth3 entered promiscuous mode
  449. [ 42.893000] device eth5 entered promiscuous mode
  450. [ 42.897000] br-lan: port 5(eth5) entered forwarding state
  451. [ 42.902000] br-lan: port 5(eth5) entered forwarding state
  452. [ 42.909000] ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  453. [ 42.921000] ADDRCONF(NETDEV_UP): ptm0: link is not ready
  454. [ 42.925000] netdev path : wanptm0 -> ptm0
  455. [ 42.932000] ADDRCONF(NETDEV_UP): wanptm0: link is not ready
  456. [ 42.938000] netdev path : wl1_1 -> eth5
  457. [ 43.109000] device wl0 entered promiscuous mode
  458. [ 43.580000] Line 0: xDSL G.994 training
  459. [ 44.904000] br-lan: port 5(eth5) entered forwarding state
  460. [ 50.351000] eth0 (Ext switch port: 0) (Logical Port: 8) Link UP 1000 mbps full duplex
  461. [ 50.367000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  462. [ 50.372000] br-lan: port 1(eth0) entered forwarding state
  463. [ 50.378000] br-lan: port 1(eth0) entered forwarding state
  464. [ 52.384000] br-lan: port 1(eth0) entered forwarding state
  465. [ 58.583000] Line 0: VDSL G.993 started
  466. [ 61.252000] br_netlink_mcpd.c: Setting registration type 0 pid to 4088
  467. [ 61.471000] eth0 (Ext switch port: 0) (Logical Port: 8) Link DOWN.
  468. [ 61.477000] br-lan: port 1(eth0) entered disabled state
  469. [ 62.817000] device wanptm0 entered promiscuous mode
  470. [ 62.821000] device ptm0 entered promiscuous mode
  471. [ 64.505000] eth0 (Ext switch port: 0) (Logical Port: 8) Link UP 1000 mbps full duplex
  472. [ 64.513000] br-lan: port 1(eth0) entered forwarding state
  473. [ 64.518000] br-lan: port 1(eth0) entered forwarding state
  474. [ 66.520000] br-lan: port 1(eth0) entered forwarding state
  475. [ 69.586000] Line 0: VDSL G.993 channel analysis
  476. [ 71.391000] Line 0: VDSL2 link up, Bearer 0, us=21600, ds=99495
  477. [ 71.396000] Line 0: VDSL2 link up, Bearer 1, us=0, ds=0
  478. [ 71.402000] bcmxtmcfg: DS xDSL G.inp Mode = ENABLED
  479. [ 71.407000] bcmxtmcfg: xDSL G.Fast Mode = DISABLED
  480. [ 71.412000] bcmxtmcfg: XTM Link Information, port = 0, State = UP(1), Service Support = PTM(2)
  481. [ 71.421000] bcmxtmcfg: ReconfigureSAR port 0 traffictype 2
  482. [ 71.427000] bcmxtmcfg: Normal(XTM/PTM) Mode enabled
  483. [ 71.432000] bcmxtmcfg: Reserve TxQueueIdx=0 for vcid 0
  484. [ 71.437000] bcmxtmrt: Traffic Type is 2. TxPAF control-0. Disable RDP-US-Bonding.
  485. [ 71.445000] bcmxtmrt: Egress TM Q 0 Setup. Buffering/Q - 128
  486. [ 71.451000] bcmxtmcfg: Connection UP, LinkActiveStatus=0x1, US=21600000, DS=99495000
  487. [ 71.459000] ADDRCONF(NETDEV_CHANGE): ptm0: link becomes ready
  488. [ 71.459000] ADDRCONF(NETDEV_CHANGE): wanptm0: link becomes ready
  489. [ 71.459000] br-lan: port 7(wanptm0) entered forwarding state
  490. [ 71.460000] br-lan: port 7(wanptm0) entered forwarding state
  491. [ 71.948000] Endpoint: endpoint_init entry
  492. [ 71.957000] Endpoint: endpoint_init COMPLETED
  493. [ 72.073000] mmConnKrnlBrcm: INIT: num_rtpsock_ctx = 42
  494. [ 72.078000] mmConnKrnlBrcm: INIT: COMPLETED
  495. [ 73.464000] br-lan: port 7(wanptm0) entered forwarding state
  496. [ 75.249000] BOS: Enter bosInit
  497. [ 75.251000] BOS: Exit bosInit
  498. [ 75.299000] ******* DSP: Found BCM63138 *******
  499. [ 75.303000] ******* DSP: In PCM Mode *******
  500. [ 75.307000] ******* DSP: PCM running in 16 bit mode *******
  501. [ 75.313000] gInterruptCounter = 0xBFB2CACC
  502. [ 75.317000] gInterruptErrors = 0xBFB2CAD0
  503. [ 75.322000] halShimEntryCount = 0x00000002
  504. [ 75.327000] gDectTestMode = 0xbfb2cc18
  505. [ 75.332000] dectBuffStart = 0xbfb2cc00
  506. [ 75.336000] gDectRxOutOfSyncCounter = 0xbfb2cc1c
  507. [ 75.341000] gDectTxOutOfSyncCounter = 0xbfb2cc20
  508. [ 75.346000] ddrAddrTxV = 0xbfb2cba4
  509. [ 75.351000] ddrAddrRxV = 0xbfb2cba8
  510. [ 75.356000] 32 ms ECAN tail-length
  511. [ 75.359000] *** dmaCtl[0].rx[0].descVirt = 0xFFDFB000
  512. [ 75.364000] *** dmaCtl[0].rx[1].descVirt = 0xFFDFB008
  513. [ 75.370000] *** dmaCtl[0].tx[0].descVirt = 0xFFDFB7D0
  514. [ 75.375000] *** dmaCtl[0].tx[1].descVirt = 0xFFDFB7D8
  515. [ 75.380000] *** buffer size: 640
  516. [ 75.383000] *** Ownership for TX desc 1 not set. Use this buffer.
  517. [ 75.390000] Binding 0xd4eec9c0
  518. [ 77.282000] boardHalInit completed
  519. [ 77.289000] DSP: Interrupt Ids
  520. [ 77.291000] ---------------
  521. [ 77.294000] InterruptId = 148
  522. [ 77.682000] EndpointInit completed
  523. [ 77.685000] dgasp: kerSysRegisterDyingGaspHandler: endpoint registered
  524. [ 119.299000] netdev path : ppp0 -> wanptm0 -> ptm0
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!