API tools faq
paste
Advertisement
pfeerick

pinebook serial boot

pfeerick
Jun 29th, 2019
392
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 51.83 KB | None | 0 0
raw download clone embed print report
  1. HELLO! BOOT0 is starting!
  2. boot0 commit : 8
  3. boot0 version : 4.0.0
  4. set pll start
  5. set pll end
  6. rtc[0] value = 0x00000000
  7. rtc[1] value = 0x00000000
  8. rtc[2] value = 0x00000000
  9. rtc[3] value = 0x0000a101
  10. rtc[4] value = 0x00000000
  11. rtc[5] value = 0x00000000
  12. DRAM driver version: V1.0
  13. DRAM Type = 7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  14. DRAM clk = 552 MHz
  15. DRAM zq value: 003b3bbb
  16. rsb_send_initseq: rsb clk 400Khz -> 3Mhz
  17. PMU: AXP81X
  18. ddr voltage = 1280 mv
  19. DRAM dual rank full DQ gate training OK
  20. DRAM size = 2048 MB
  21. DRAM init ok
  22. dram size = 2048
  23. card boot number = 2, boot0 copy = 0
  24. card no is 2
  25. sdcard 2 line count 8
  26. [mmc]: mmc driver ver 2015-05-08 20:06
  27. [mmc]: mmc_get_timing_cfg: input para error!
  28. [mmc]: mmc_get_timing_cfg: input para error!
  29. [mmc]: Wrong media type 0x00000000
  30. [mmc]: ***Try SD card 2***
  31. [mmc]: mmc 2 cmd 8 timeout, err 00000100
  32. [mmc]: mmc 2 cmd 8 err 00000100
  33. [mmc]: mmc 2 send if cond failed
  34. [mmc]: mmc 2 cmd 55 timeout, err 00000100
  35. [mmc]: mmc 2 cmd 55 err 00000100
  36. [mmc]: mmc 2 send app cmd failed
  37. [mmc]: ***Try MMC card 2***
  38. [mmc]: MMC 4.5
  39. [mmc]: HSSDR52/SDR25 8 bit
  40. [mmc]: 25000000 Hz
  41. [mmc]: 59640 MB
  42. [mmc]: ***SD/MMC 2 init OK!!!***
  43. sdcard 2 init ok
  44. The size of uboot is 000f4000.
  45. sum=588fba69
  46. src_sum=588fba69
  47. 0x00000001 0x00000000
  48. 0x00000000 0x00000000
  49. 0x00000000 0x00000000
  50. 0x00000000 0x00000000
  51. 0x00000000 0x00000000
  52. Succeed in loading uboot from sdmmc flash.
  53. boot0: start load other image
  54. boot0: Loading BL3-1
  55. Loading file 0 at address 0x40000000,size 0x0000a400 success
  56. boot0: Loading scp
  57. Loading file 2 at address 0x00040000,size 0x00019c00 success
  58. set arisc reset to de-assert state
  59. Ready to disable icache.
  60. Jump to secend Boot.r=Q%é Configuring SPC Controller
  61. NOTICE: BL3-1: v1.0(debug):864ef11
  62. NOTICE: BL3-1: Built : 21:29:06, Sep 19 2017
  63. INFO: BL3-1: Initializing runtime services
  64. INFO: BL3-1: Preparing for EL3 exit to normal world
  65. INFO: BL3-1: Next image address = 0x4a000000
  66. INFO: BL3-1: Next image spsr = 0x1d3
  67.  
  68.  
  69. U-Boot 2014.07-00024-g4545e6d (Oct 15 2017 - 23:11:36) Allwinner Technology
  70.  
  71. uboot commit : 4545e6dc970c8c3938590d95001b96b814b1c441
  72.  
  73. rsb: secure monitor exist
  74. [ 0.424]pmbus: ready
  75. [ 0.427][ARISC] :arisc initialize
  76. [ 0.812][ARISC] :arisc_dvfs_cfg_vf_table: support only one vf_table
  77. [SCP] :sunxi-arisc driver begin startup 2
  78. [SCP] :arisc_para size:1a8
  79. [SCP] :arisc version: [v0.1.76]
  80. [SCP] :sunxi-arisc driver v1.10 is starting
  81. [ 0.957][ARISC] :sunxi-arisc driver startup succeeded
  82. [ 0.994]PMU: AXP81X
  83. [ 0.997]PMU: AXP81X found
  84. bat_vol=3980, ratio=51
  85. [ 1.003]PMU: dcdc2 1100
  86. [ 1.007]PMU: cpux 1008 Mhz,AXI=336 Mhz
  87. PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz AHB2=300Mhz MBus=400Mhz
  88. device_type = 3253, onoff=1
  89. dcdc1_vol = 3300, onoff=1
  90. dcdc2_vol = 1100, onoff=1
  91. dcdc6_vol = 1100, onoff=1
  92. aldo1_vol = 2800, onoff=0
  93. aldo2_vol = 1800, onoff=1
  94. aldo3_vol = 3000, onoff=1
  95. dldo1_vol = 3300, onoff=0
  96. dldo2_vol = 2500, onoff=0
  97. dldo3_vol = 2800, onoff=0
  98. dldo4_vol = 3300, onoff=1
  99. eldo1_vol = 1800, onoff=1
  100. eldo2_vol = 1800, onoff=0
  101. eldo3_vol = 1800, onoff=0
  102. fldo1_vol = 1200, onoff=0
  103. fldo2_vol = 1100, onoff=1
  104. gpio0_vol = 3100, onoff=1
  105. vbus not exist
  106. normal dc exist, limit to dc
  107. run key detect
  108. no key found
  109. no uart input
  110. DRAM: 2 GiB
  111. fdt addr: 0xb6ebbb00
  112. Relocation Offset is: 75f10000
  113. In: serial
  114. Out: serial
  115. Err: serial
  116. gic: sec monitor mode
  117. [ 1.330]start
  118. drv_disp_init
  119. init_clocks: finish init_clocks.
  120. fdt_get_one_gpio lcd0.lcd_gpio_2 fail
  121. fdt_get_one_gpio lcd0.lcd_gpio_3 fail
  122. fdt_get_one_gpio lcd0.lcd_gpio_scl fail
  123. fdt_get_one_gpio lcd0.lcd_gpio_sda fail
  124. pwm_request: reg = 0x1c21400.pchip->pwm = 0
  125. reg_busy_offset=0, reg_busy_shift = 0, reg_enable_offset = 0
  126. request pwm success, pwm = 0!
  127. sunxi_pwm_config: reg_shift = 0, reg_width = 4, prescale temp = 20, pres=0
  128. PWM _TEST: duty_ns=976562, period_ns=5000000, freq=200, per_scal=1, period_reg=0x3e700c3
  129. enable power vcc-hdmi-33, ret=0
  130. drv_disp_init finish
  131. boot_disp.output_disp=0
  132. boot_disp.output_type=1
  133. boot_disp.output_mode=4
  134. fetch script data boot_disp.auto_hpd fail
  135. disp0 device type(1) enable
  136. disp 0, clk: pll(560000000),clk(560000000),dclk(80000000) dsi_rate(560000000)
  137. clk real:pll(556875000),clk(556875000),dclk(79553571) dsi_rate(0)
  138. enable power vcc-mipi, ret=0
  139. enable power vcc-hsic-12, ret=0
  140. enable power vcc-lvds, ret=0
  141. enable power vcc-pd, ret=0
  142. [ 2.154]end
  143. workmode = 0,storage type = 2
  144. [ 2.158]MMC: 2
  145. [mmc]: mmc driver ver 2016-09-19 14:00:00
  146. [ 2.226]
  147. lcd_edp_tx_rate=2,
  148. lcd_edp_tx_lane=1,
  149. lcd_edp_colordepth=1,
  150. lcd_model_name=2
  151. [ 2.236]ANX9807 Chip found
  152. [ 2.341]..................................clock is detected.
  153. [ 2.370]..................................clock is stable.
  154. [mmc]: get sdc_ex_dly_used 1, use manual sdly in fex
  155. [mmc]: card2 io is 1.8V.
  156. [mmc]: get sdc2 sdc_ffu_en fail.
  157. SUNXI SD/MMC: 2
  158. [mmc]: 50 MHz...
  159. [mmc]: sample: 51 - 196(ps)
  160. [mmc]: ds: 51 - 196(ps)
  161. [mmc]: 100 MHz...
  162. [mmc]: sample: 26 - 192(ps)
  163. [mmc]: ds: 25 - 200(ps)
  164. [mmc]: 200 MHz...
  165. [mmc]: sample: 13 - 192(ps)
  166. [mmc]: ds: 13 - 192(ps)
  167. [mmc]: media type 0x0
  168. [mmc]: Wrong media type 0x0
  169. [mmc]: ************Try SD card 2************
  170. [mmc]: mmc 2 cmd 8 timeout, err 100
  171. [mmc]: smc 2 err, cmd 8, RTO
  172. [mmc]: mmc 2 close bus gating and reset
  173. [mmc]: mmc 2 mmc cmd 8 err 0x00000100
  174. [mmc]: mmc send if cond failed
  175. [mmc]: mmc 2 cmd 55 timeout, err 100
  176. [mmc]: smc 2 err, cmd 55, RTO
  177. [mmc]: mmc 2 close bus gating and reset
  178. [mmc]: mmc 2 mmc cmd 55 err 0x00000100
  179. [mmc]: send app cmd failed
  180. [mmc]: ************Try MMC card 2************
  181. sunxi_pwm_config: reg_shift = 0, reg_width = 4, prescale temp = 70, pres=0
  182. PWM _TEST: duty_ns=996094, period_ns=5000000, freq=200, per_scal=1, period_reg=0x3e700c7
  183. sunxi_pwm_config: reg_shift = 0, reg_width = 4, prescale temp = 70, pres=0
  184. PWM _TEST: duty_ns=996094, period_ns=5000000, freq=200, per_scal=1, period_reg=0x3e700c7
  185. [mmc]: mmc don't support HS400
  186. [mmc]: host caps: 0xef
  187. [mmc]: MID 000045 PSN 45404332
  188. [mmc]: PNM SEM64G -- 0x53-45-4d-36-34
  189. [mmc]: PRV 0.7
  190. [mmc]: MDT m-13 y-2017
  191. [mmc]: MMC v4.5
  192. [mmc]: speed mode : HSSDR52/SDR25
  193. [mmc]: clock : 50000000 Hz
  194. [mmc]: bus_width : 8 bit
  195. [mmc]: user capacity : 59640 MB
  196. [mmc]: boot capacity : 4096 KB
  197. [mmc]: rpmb capacity : 4096 KB
  198. [mmc]: ************SD/MMC 2 init OK!!!************
  199. [mmc]: use default speed mode: 1-HSSDR52/SDR25, ifreq: 2
  200. [mmc]: ========best spd md: 1-HSSDR52/SDR25, freq: 2-50000000
  201. [mmc]: already at HSSDR52_SDR25 mode
  202. [mmc]: erase_grp_size : 0x400WrBlk*0x200=0x80000 Byte
  203. [mmc]: secure_feature : 0x55
  204. [mmc]: secure_removal_type : 0x0
  205. [ 2.793]sunxi flash init ok
  206. [mmc]: MMC Device 0 not found
  207. ** Bad device mmc 0 **
  208. Using default environment
  209.  
  210. --------fastboot partitions--------
  211. mbr not exist
  212. base bootcmd=run mmcbootcmd
  213. bootcmd set setargs_mmc
  214. key 0
  215. recovery key high 12, low 10
  216. fastboot key high 6, low 4
  217. no misc partition is found
  218. to be run cmd=run mmcbootcmd
  219. update dtb dram start
  220. update dtb dram end
  221. serial is: 8400503443184015014e
  222. check for ANX9807
  223. found ANX9807 chip
  224. Pine64 model: pine64-pinebook
  225. PowerBus = 2(0: not exist 1:vBus 2:acBus 3:vBus&acBus)
  226. Battery Voltage=3936, Ratio=51
  227. key trigger
  228. sunxi_bmp_logo_display
  229. reading bootlogo.bmp
  230. 3148854 bytes read in 99 ms (30.3 MiB/s)
  231. bmp file buffer: 0x41000000, bmp_info.buffer: 47400000
  232. fetch script data boot_disp.output_full fail
  233. screen_id =0, screen_width =1366, screen_height =768
  234. frame buffer address 47400036
  235. [ 4.278]inter uboot shell
  236. autoboot in 1 seconds, Press s to abort
  237. reading /uEnv.txt
  238. 1944 bytes read in 3 ms (632.8 KiB/s)
  239. Loading boot environment ...
  240. reading /boot.scr
  241. 8907 bytes read in 3 ms (2.8 MiB/s)
  242. Booting with script ...
  243. ## Executing script at 41000000
  244. reading pine64/sun50i-a64-pine64-pinebook.dtb
  245. 78725 bytes read in 9 ms (8.3 MiB/s)
  246. HDMI mode: <0x0000000a>
  247. Using experimental HDMI CEC driver
  248. USB-OTG port is in host mode
  249. Booting from eMMC so moving SD definition...
  250. [FDT] duplicating sdmmc@01c0f000 of /soc@01c00000/ to sdmmc@01c0f001...
  251. sdmmc@01c0f000 {
  252. compatible = "allwinner,sun50i-sdmmc0";
  253. device_type = "sdc0";
  254. reg = <0x00000000 0x01c0f000 0x00000000 0x00001000>;
  255. interrupts = <0x00000000 0x0000003c 0x00000104>;
  256. clocks = <0x00000006 0x0000005a 0x00000060 0x00000061 0x00000062>;
  257. clock-names = "osc24m", "pll_periph", "mmc", "ahb", "rst";
  258. pinctrl-names = "default", "sleep";
  259. pinctrl-1 = <0x00000064>;
  260. max-frequency = <0x02faf080>;
  261. bus-width = <0x00000004>;
  262. broken-cd;
  263. status = "okay";
  264. pinctrl-0 = <0x000000c0>;
  265. cd-gpios = <0x00000030 0x00000005 0x00000006 0x00000000 0x00000001 0x00000002 0xffffffff>;
  266. sunxi-power-save-mode;
  267. vmmc = "vcc-sdcv";
  268. vqmmc = "vcc-sdcvq33";
  269. vdmmc = "vcc-sdc";
  270. };
  271. reading recovery.txt
  272. ** Unable to read file recovery.txt **
  273. Loading kernel and initrd...
  274. reading kernel
  275. 10831480 bytes read in 332 ms (31.1 MiB/s)
  276. reading ramdisk.img
  277. ** Unable to read file ramdisk.img **
  278. Image lacks image_size field, assuming 16MiB
  279. ## Flattened Device Tree blob at 45000000
  280. Booting using the fdt blob at 0x45000000
  281. reserving fdt memory region: addr=41010000 size=10000
  282. reserving fdt memory region: addr=41020000 size=800
  283. reserving fdt memory region: addr=40100000 size=4000
  284. reserving fdt memory region: addr=40104000 size=1000
  285. reserving fdt memory region: addr=40105000 size=1000
  286. reserving fdt memory region: addr=45000000 size=14000
  287. Loading Ramdisk to b6457000, end b6eab678 ... OK
  288. Loading Device Tree to 44fe8000, end 44ffefff ... OK
  289.  
  290. Starting kernel ...
  291.  
  292. [mmc]: mmc exit start
  293. [mmc]: 50 MHz...
  294. [mmc]: sample: 51 - 196(ps)
  295. [mmc]: ds: 51 - 196(ps)
  296. [mmc]: 100 MHz...
  297. [mmc]: sample: 26 - 192(ps)
  298. [mmc]: ds: 25 - 200(ps)
  299. [mmc]: 200 MHz...
  300. [mmc]: sample: 13 - 192(ps)
  301. [mmc]: ds: 13 - 192(ps)
  302. [mmc]: mmc 2 exit ok
  303. INFO: BL3-1: Next image address = 0x41080000
  304. INFO: BL3-1: Next image spsr = 0x3c9
  305. [ 0.000000] Initializing cgroup subsys cpuset
  306. [ 0.000000] Initializing cgroup subsys cpu
  307. [ 0.000000] Initializing cgroup subsys cpuacct
  308. [ 0.000000] Linux version 3.10.105-bsp-1.2-ayufan-118 (root@a84864ec8dfc) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP PREEMPT Sun Oct 15 21:40:57 UTC 2017
  309. [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
  310. [ 0.000000] Machine: sun50iw1p1
  311. [ 0.000000] bootconsole [earlycon0] enabled
  312. [ 0.000000] cma: CMA: reserved 384 MiB at 9e400000
  313. [ 0.000000] On node 0 totalpages: 520192
  314. [ 0.000000] DMA zone: 7112 pages used for memmap
  315. [ 0.000000] DMA zone: 0 pages reserved
  316. [ 0.000000] DMA zone: 520192 pages, LIFO batch:31
  317. [ 0.000000] script_init enter!
  318. [ 0.000000] script buffer is NULL!
  319. [ 0.000000] psci: probing for conduit method from DT.
  320. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  321. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  322. [ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc07ef91000 s18752 r8192 d22208 u49152
  323. [ 0.000000] pcpu-alloc: s18752 r8192 d22208 u49152 alloc=12*4096
  324. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  325. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513080
  326. [ 0.000000] Kernel command line: console=ttyS0,115200n8 enforcing=0 cma=384M no_console_suspend androidboot.serialno=8400503443184015014e androidboot.hardware=sun50iw1p1 androidboot.selinux=permissive earlyprintk=sunxi-uart,0x01c28000 loglevel=8 root=/dev/mmcblk0p2 eth0_speed=auto
  327. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  328. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  329. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  330. [ 0.000000] Memory: 2032MB = 2032MB total
  331. [ 0.000000] Memory: 1633224k/1633224k available, 447544k reserved
  332. [ 0.000000] Virtual kernel memory layout:
  333. [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
  334. [ 0.000000] vmemmap : 0xffffffbc00e38000 - 0xffffffbc02a00000 ( 27 MB)
  335. [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  336. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc07f000000 ( 2032 MB)
  337. [ 0.000000] .init : 0xffffffc0009b0000 - 0xffffffc000a31940 ( 519 kB)
  338. [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0009afa44 ( 9407 kB)
  339. [ 0.000000] .data : 0xffffffc000a32000 - 0xffffffc000ad4678 ( 650 kB)
  340. [ 0.000000] Preemptible hierarchical RCU implementation.
  341. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  342. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  343. [ 0.000000] Console: colour dummy device 80x25
  344. [ 0.000000] allocated 8388608 bytes of page_cgroup
  345. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  346. [ 10.706207] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  347. [ 10.716350] pid_max: default: 32768 minimum: 301
  348. [ 10.720956] Security Framework initialized
  349. [ 10.724913] AppArmor: AppArmor initialized
  350. [ 10.728917] Mount-cache hash table entries: 256
  351. [ 10.744249] Initializing cgroup subsys memory
  352. [ 10.744311] Initializing cgroup subsys devices
  353. [ 10.747343] Initializing cgroup subsys freezer
  354. [ 10.751705] Initializing cgroup subsys blkio
  355. [ 10.755869] Initializing cgroup subsys perf_event
  356. [ 10.760480] Initializing cgroup subsys hugetlb
  357. [ 10.764891] ftrace: allocating 26646 entries in 105 pages
  358. [ 10.802087] CPU0: update cpu_power 1968128
  359. [ 10.802121] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  360. [ 10.809981] CPU1: Booted secondary processor
  361. [ 10.810009] CPU1: update cpu_power 1968128
  362. [ 10.812603] CPU2: Booted secondary processor
  363. [ 10.812615] CPU2: update cpu_power 1968128
  364. [ 10.816721] CPU3: Booted secondary processor
  365. [ 10.816732] CPU3: update cpu_power 1968128
  366. [ 10.816809] Brought up 4 CPUs
  367. [ 10.838759] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  368. [ 10.845430] devtmpfs: initialized
  369. [ 10.853067] atomic64 test passed
  370. [ 10.853089] pinctrl core: initialized pinctrl subsystem
  371. [ 10.868965] NET: Registered protocol family 16
  372. [ 10.869292] script_sysfs_init success
  373. [ 10.871601] dump_class_init,806, success
  374. [ 10.875503] vdso: 2 pages (1 code, 1 data) at base ffffffc000a39000
  375. [ 10.881400] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  376. [ 10.889396] software IO TLB [mem 0xbc800000-0xbcc00000] (4MB) mapped at [ffffffc07b800000-ffffffc07bbfffff]
  377. [ 10.898584] DMA: preallocated 256 KiB pool for atomic allocations
  378. [ 10.903594] Serial: AMBA PL011 UART driver
  379. [ 10.907646] axp81x_board_init: axp regl_devs num = 23
  380. [ 10.912622] pll_audio-set_default_rate=24576000 success!
  381. [ 10.917706] pll_video0-set_default_rate=297000000 success!
  382. [ 10.923120] pll_video1-set_default_rate=297000000 success!
  383. [ 10.928491] pll_de-set_default_rate=297000000 success!
  384. [ 10.934199] de-set_default_source=pll_de success!
  385. [ 10.938064] de-set_default_rate=297000000 success!
  386. [ 10.942807] tcon0-set_default_source=pll_mipi success!
  387. [ 10.947812] tcon1-set_default_source=pll_video0 success!
  388. [ 10.953216] hdmi-set_default_source=pll_video0 success!
  389. [ 10.960414] sun50i-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
  390. [ 10.965016] [sun50iw1p1_pinctrl_probe][838]
  391. [ 10.970604] sun50i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  392. [ 10.976157] sunxi hwspinlock vbase:0xffffff8000056000
  393. [ 10.990506] bio: create slab <bio-0> at 0
  394. [ 10.990887] pwm module init!
  395. [ 10.992945] SCSI subsystem initialized
  396. [ 10.995540] usbcore: registered new interface driver usbfs
  397. [ 11.000787] usbcore: registered new interface driver hub
  398. [ 11.006037] usbcore: registered new device driver usb
  399. [ 11.011650] Linux video capture interface: v2.00
  400. [ 11.015895] [ARISC] :sunxi-arisc driver v1.10
  401. [ 11.026604] [ARISC] :sunxi-arisc driver v1.10 startup succeeded
  402. [ 11.027116] Advanced Linux Sound Architecture Driver Initialized.
  403. [ 11.033234] NetLabel: Initializing
  404. [ 11.036191] NetLabel: domain hash size = 128
  405. [ 11.040437] NetLabel: protocols = UNLABELED CIPSOv4
  406. [ 11.045339] NetLabel: unlabeled traffic allowed by default
  407. [ 11.050926] [pm]aw_pm_init!
  408. [ 11.053551] rtc physical base = 0x0000000001f00000 .
  409. [ 11.058463] np name = /soc@01c00000/rtc@01f00000.
  410. [ 11.063134] base = ffffff8000068100, len = 4.
  411. [ 11.067387] pmu name: pmu0 .
  412. [ 11.070234] pmu0_enable = 0x1.
  413. [ 11.073280] pmux_id = 0x6.
  414. [ 11.076002] pmux_twi_id = 0x1.
  415. [ 11.079071] pmux_twi_addr = 0x34.
  416. [ 11.082396] pmu name: pmu1 .
  417. [ 11.085262] Warning: can not find np for pmu1.
  418. [ 11.089877] add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed
  419. [ 11.095869] after inited: sys_mask config = 0x4a55.
  420. [ 11.100579] Warning: can not find np for dynamic_standby_para.
  421. [ 11.106505] [pm]valid
  422. [ 11.108576] [pm]valid
  423. [ 11.110794] Notice: sun9i&sun8iw5&sun50i not need support normal standby, change to super standby.
  424. [ 11.120178] Switching to clocksource arch_sys_counter_ool
  425. [ 11.136841] AppArmor: AppArmor Filesystem Enabled
  426. [ 11.143790] NET: Registered protocol family 2
  427. [ 11.144560] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
  428. [ 11.149884] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  429. [ 11.156438] TCP: Hash tables configured (established 16384 bind 16384)
  430. [ 11.162566] TCP: reno registered
  431. [ 11.165660] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  432. [ 11.171572] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  433. [ 11.178089] NET: Registered protocol family 1
  434. [ 11.182427] RPC: Registered named UNIX socket transport module.
  435. [ 11.187911] RPC: Registered udp transport module.
  436. [ 11.192505] RPC: Registered tcp transport module.
  437. [ 11.197119] RPC: Registered tcp NFSv4.1 backchannel transport module.
  438. [ 11.203598] Trying to unpack rootfs image as initramfs...
  439. [ 11.208912] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
  440. [ 11.245918] Freeing initrd memory: 10576K (ffffffc075457000 - ffffffc075eab000)
  441. [ 11.248203] kvm [1]: Using HYP init bounce page @bb80a000
  442. [ 11.253433] kvm [1]: interrupt-controller@1c84000 IRQ25
  443. [ 11.258407] kvm [1]: timer IRQ27
  444. [ 11.261128] kvm [1]: Hyp mode initialized successfully
  445. [ 11.267993] lock super standby defaultly!
  446. [ 11.270081] lookup_scene_lock_name: new scene lock super_standby
  447. [ 11.275975] scene_lock_init name=super_standby
  448. [ 11.280310] scene_lock: super_standby, type 5, count 1
  449. [ 11.285765] audit: initializing netlink socket (disabled)
  450. [ 11.290679] type=2000 audit(0.530:1): initialized
  451. [ 11.295950] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  452. [ 11.301915] VFS: Disk quotas dquot_6.5.2
  453. [ 11.305419] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  454. [ 11.312595] NFS: Registering the id_resolver key type
  455. [ 11.316608] Key type id_resolver registered
  456. [ 11.320646] Key type id_legacy registered
  457. [ 11.324588] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  458. [ 11.330942] NTFS driver 2.1.30 [Flags: R/W].
  459. [ 11.335282] fuse init (API version 7.22)
  460. [ 11.339002] msgmni has been set to 3978
  461. [ 11.343590] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  462. [ 11.349906] io scheduler noop registered
  463. [ 11.353666] io scheduler deadline registered
  464. [ 11.357854] io scheduler cfq registered (default)
  465. [ 11.363407] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  466. [ 11.368335] sw_console_setup()1173 - console setup baud 115200 parity n bits 8, flow n
  467. [ 11.376171] console [ttyS0] enabled, bootconsole disabled
  468. [ 11.376171] console [ttyS0] enabled, bootconsole disabled
  469. [ 11.387964] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  470. [ 11.399703] misc dump reg init
  471. [ 11.403179] [drm] Initialized drm 1.1.0 20060810
  472. [ 11.412691] brd: module loaded
  473. [ 11.418351] loop: module loaded
  474. [ 11.422150] sunxi-bt bt.24: Missing bt_power.
  475. [ 11.426904] sunxi-bt bt.24: bt_power_name ((null))
  476. [ 11.432150] sunxi-bt bt.24: io_regulator_name (vcc-wifi-io)
  477. [ 11.438268] sunxi-bt bt.24: bt_rst gpio=356 mul-sel=1 pull=-1 drv_level=-1 data=0
  478. [ 11.446869] sunxi-bt bt.24: clk not config
  479. [ 11.451411] sunxi-bt bt.24: block state already is 1
  480. [ 11.457012] sunxi-wlan wlan.23: wlan_busnum (1)
  481. [ 11.461983] sunxi-wlan wlan.23: Missing wlan_power.
  482. [ 11.467304] sunxi-wlan wlan.23: wlan_power_name ((null))
  483. [ 11.473109] sunxi-wlan wlan.23: io_regulator_name (vcc-wifi-io)
  484. [ 11.479590] sunxi-wlan wlan.23: wlan_regon gpio=354 mul-sel=1 pull=-1 drv_level=-1 data=0
  485. [ 11.488908] sunxi-wlan wlan.23: wlan_hostwake gpio=355 mul-sel=6 pull=-1 drv_level=-1 data=0
  486. [ 11.498517] sunxi-wlan wlan.23: clk not config
  487. [ 11.503985] tun: Universal TUN/TAP device driver, 1.6
  488. [ 11.509506] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  489. [ 11.516486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  490. [ 11.523748] get ehci0-controller, regulator_io is no nocare
  491. [ 11.530076] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000b57958, 0x:ffffff8000094000, irq_no:68
  492. [ 11.543451] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  493. [ 11.553348] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
  494. [ 11.563194] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc0004b7d70
  495. [ 11.587738] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
  496. [ 11.595727] hub 1-0:1.0: USB hub found
  497. [ 11.599839] hub 1-0:1.0: 1 port detected
  498. [ 11.604250] [ehci0-controller]: sunxi_usb_disable_ehci
  499. [ 11.609870] [sunxi-ehci0]: remove, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000b57958
  500. [ 11.620141] sunxi-ehci 1c1a000.ehci0-controller: remove, state 1
  501. [ 11.626701] usb usb1: USB disconnect, device number 1
  502. [ 11.632607] sunxi-ehci 1c1a000.ehci0-controller: USB bus 1 deregistered
  503. [ 11.640090] get ehci1-controller, regulator_io is no nocare
  504. [ 11.646224] [sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller, sunxi_ehci: 0xffffffc000b57ba8, 0x:ffffff800009a000, irq_no:6a
  505. [ 11.659465] sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  506. [ 11.669360] sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered, assigned bus number 1
  507. [ 11.679055] sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem 0xffffffc0004b7d70
  508. [ 11.705818] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00
  509. [ 11.713418] ehci_irq: highspeed device connect
  510. [ 11.718340] hub 1-0:1.0: USB hub found
  511. [ 11.722435] hub 1-0:1.0: 1 port detected
  512. [ 11.727026] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  513. [ 11.733917] get ohci0-controller, regulator_io is no nocare
  514. [ 11.740043] hci: request ohci0-controller gpio:1027
  515. [ 11.745374] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000b574b8
  516. [ 11.755851] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  517. [ 11.765366] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 2
  518. [ 11.774800] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0x00000000
  519. [ 11.838020] hub 2-0:1.0: USB hub found
  520. [ 11.842116] hub 2-0:1.0: 1 port detected
  521. [ 11.846526] [ohci0-controller]: sunxi_usb_disable_ohci
  522. [ 11.852131] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000b574b8
  523. [ 11.862398] sunxi-ohci 1c1a000.ohci0-controller: remove, state 1
  524. [ 11.868973] usb usb2: USB disconnect, device number 1
  525. [ 11.874790] sunxi-ohci 1c1a000.ohci0-controller: USB bus 2 deregistered
  526. [ 11.882221] get ohci1-controller, regulator_io is no nocare
  527. [ 11.888345] hci: request ohci1-controller gpio:38
  528. [ 11.893489] [sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller, sunxi_ohci: 0xffffffc000b57708
  529. [ 11.903688] sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  530. [ 11.913200] sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered, assigned bus number 2
  531. [ 11.922678] sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem 0x00000000
  532. [ 11.985570] hub 2-0:1.0: USB hub found
  533. [ 11.989664] hub 2-0:1.0: 1 port detected
  534. [ 11.994312] usbcore: registered new interface driver usb-storage
  535. [ 12.000890] usbcore: registered new interface driver ums-alauda
  536. [ 12.007384] usbcore: registered new interface driver ums-cypress
  537. [ 12.013981] usbcore: registered new interface driver ums-datafab
  538. [ 12.020550] usbcore: registered new interface driver ums_eneub6250
  539. [ 12.027322] usbcore: registered new interface driver ums-freecom
  540. [ 12.033904] usbcore: registered new interface driver ums-isd200
  541. [ 12.040389] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  542. [ 12.047750] usbcore: registered new interface driver ums-jumpshot
  543. [ 12.054427] usbcore: registered new interface driver ums-karma
  544. [ 12.060818] usbcore: registered new interface driver ums-onetouch
  545. [ 12.067499] usbcore: registered new interface driver ums-realtek
  546. [ 12.074082] usbcore: registered new interface driver ums-sddr09
  547. [ 12.080568] usbcore: registered new interface driver ums-sddr55
  548. [ 12.087044] usbcore: registered new interface driver ums-usbat
  549. [ 12.093516] usbcore: registered new interface driver usbserial
  550. [ 12.099910] usbcore: registered new interface driver usbserial_generic
  551. [ 12.107047] usbserial: USB Serial support registered for generic
  552. [ 12.113807] mousedev: PS/2 mouse device common for all mice
  553. [ 12.120341] input: sunxi-keyboard as /devices/virtual/input/input0
  554. [ 12.127586] sunxi-rtc 1f00000.rtc: rtc core: registered rtc-sunxi as rtc0
  555. [ 12.135023] sunxi-rtc 1f00000.rtc: RTC enabled
  556. [ 12.140062] i2c /dev entries driver
  557. [ 12.178719] input: axp81x-supplyer as /devices/platform/axp81x_board/axp81x-supplyer.47/input/input1
  558. [ 12.190358] hub 1-1:1.0: USB hub found
  559. [ 12.192203] sunxi budget cooling probe start !
  560. [ 12.192230] CPU freq cooling register Success
  561. [ 12.192249] CPU hotplug cooling register Success
  562. [ 12.192328] CPU budget cooling register Success
  563. [ 12.192541] sunxi gpu cooling probe start !
  564. [ 12.192548] CPU gpu cooling register Success
  565. [ 12.223742] hub 1-1:1.0: 4 ports detected
  566. [ 12.226062] cpuidle: using governor ladder
  567. [ 12.226065] cpuidle: using governor menu
  568. [ 12.226792] sunxi-mmc 1c11000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.63 2016-10-13 13:39-patch201611081726) Compiled in Oct 15 2017 at 21:40:49
  569. [ 12.226821] sunxi-mmc 1c11000.sdmmc: regulator prop vmmc,str vcc-emmcv
  570. [ 12.226827] sunxi-mmc 1c11000.sdmmc: regulator prop vqmmc,str vcc-emmcvq18
  571. [ 12.226833] sunxi-mmc 1c11000.sdmmc: regulator prop vdmmc,str none
  572. [ 12.226858] sunxi-mmc 1c11000.sdmmc: No vmmc regulator found
  573. [ 12.226862] sunxi-mmc 1c11000.sdmmc: No vqmmc regulator found
  574. [ 12.226865] sunxi-mmc 1c11000.sdmmc: No vdmmc regulator found
  575. [ 12.292042] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  576. [ 12.315897] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  577. [ 12.345436] sunxi-mmc 1c11000.sdmmc: base:0xffffff80000ae000 irq:94
  578. [ 12.346314] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52, RTO !!
  579. [ 12.347128] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52, RTO !!
  580. [ 12.347144] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  581. [ 12.349520] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  582. [ 12.351340] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 8, RTO !!
  583. [ 12.352151] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
  584. [ 12.352960] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
  585. [ 12.353770] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
  586. [ 12.354579] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
  587. [ 12.355393] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
  588. [ 12.356205] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
  589. [ 12.357017] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
  590. [ 12.357829] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
  591. [ 12.357845] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  592. [ 12.358188] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  593. [ 12.358226] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  594. [ 12.358264] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  595. [ 12.360635] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  596. [ 12.505083] sunxi-mmc 1c10000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.63 2016-10-13 13:39-patch201611081726) Compiled in Oct 15 2017 at 21:40:49
  597. [ 12.513886] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  598. [ 12.525420] mmc0: BKOPS_EN bit is not set
  599. [ 12.526681] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 8 timing LEGACY(SDR12) dt B
  600. [ 12.529427] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 8 timing MMC-HS200 dt B
  601. [ 12.529470] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 100000000Hz bm PP pm ON vdd 16 width 8 timing MMC-HS200 dt B
  602. [ 12.529798] mmc0: new HS200 MMC card at address 0001
  603. [ 12.530197] mmcblk0: mmc0:0001 SEM64G 58.2 GiB
  604. [ 12.530436] mmcblk0boot0: mmc0:0001 SEM64G partition 1 4.00 MiB
  605. [ 12.530648] mmcblk0boot1: mmc0:0001 SEM64G partition 2 4.00 MiB
  606. [ 12.531329] mmcblk0: p1 p2
  607. [ 12.532629] mmcblk0boot1: unknown partition table
  608. [ 12.533616] mmcblk0boot0: unknown partition table
  609. [ 12.606009] sunxi-mmc 1c10000.sdmmc: Can't get vmmc regulator string
  610. [ 12.612963] sunxi-mmc 1c10000.sdmmc: Can't get vqmmc regulator string
  611. [ 12.619996] sunxi-mmc 1c10000.sdmmc: Can't get vdmmc regulator string
  612. [ 12.627033] get() with no identifier
  613. [ 12.630937] get() with no identifier
  614. [ 12.634835] get() with no identifier
  615. [ 12.638736] sunxi-mmc 1c10000.sdmmc: No vmmc regulator found
  616. [ 12.644920] sunxi-mmc 1c10000.sdmmc: No vqmmc regulator found
  617. [ 12.651200] sunxi-mmc 1c10000.sdmmc: No vdmmc regulator found
  618. [ 12.658018] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  619. [ 12.668969] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
  620. [ 12.689814] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  621. [ 12.690145] usb 1-1.1: new low-speed USB device number 3 using sunxi-ehci
  622. [ 12.719368] sunxi-mmc 1c10000.sdmmc: base:0xffffff80000d0000 irq:93
  623. [ 12.720149] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
  624. [ 12.720956] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
  625. [ 12.720972] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  626. [ 12.723342] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  627. [ 12.725158] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 8, RTO !!
  628. [ 12.725965] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  629. [ 12.726769] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  630. [ 12.727573] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  631. [ 12.728378] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  632. [ 12.729187] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  633. [ 12.729994] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  634. [ 12.730798] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  635. [ 12.731603] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  636. [ 12.731618] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  637. [ 12.732448] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 1, RTO !!
  638. [ 12.732466] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  639. [ 12.851059] sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.63 2016-10-13 13:39-patch201611081726) Compiled in Oct 15 2017 at 21:40:49
  640. [ 12.865717] sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str vcc-sdcv
  641. [ 12.872758] sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str vcc-sdcvq33
  642. [ 12.880246] sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdc
  643. [ 12.887359] sunxi-mmc 1c0f000.sdmmc: No vmmc regulator found
  644. [ 12.893538] sunxi-mmc 1c0f000.sdmmc: No vqmmc regulator found
  645. [ 12.900284] sunxi-mmc 1c0f000.sdmmc: Got CD GPIO #166.
  646. [ 12.906012] sunxi-mmc 1c0f000.sdmmc: base:0xffffff80000d8000 irq:92
  647. [ 12.917468] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
  648. [ 12.930325] hid-generic 0003:258A:000C.0001: input: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-sunxi-ehci-1.1/input0
  649. [ 12.955948] usb 1-1.3: new high-speed USB device number 4 using sunxi-ehci
  650. [ 12.967156] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.1/1-1.1:1.1/input/input3
  651. [ 12.980183] hid-generic 0003:258A:000C.0002: input,hiddev0: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-sunxi-ehci-1.1/input1
  652. [ 12.993913] usbcore: registered new interface driver usbhid
  653. [ 13.000023] usbhid: USB HID core driver
  654. [ 13.005199] usbcore: registered new interface driver snd-usb-audio
  655. [ 13.012410] sun50i-pinctrl 1c20800.pinctrl: unknown pin PL11
  656. [ 13.018604] sun50i-pinctrl 1c20800.pinctrl: unknown pin PL10
  657. [ 13.024797] pinctrl core: failed to register map aif2-default (2): invalid type given
  658. [ 13.037783] sunxi-codec-machine sound.6: codec-aif1 <-> 1c22c00.i2s0-controller mapping ok
  659. [ 13.047163] sunxi-codec-machine sound.6: codec-aif2 <-> bb-dai mapping ok
  660. [ 13.054850] sunxi-codec-machine sound.6: codec-aif2 <-> bb-dai mapping ok
  661. [ 13.062519] sunxi-codec-machine sound.6: codec-aif3 <-> bb-dai mapping ok
  662. [ 13.071226] input: audiocodec sunxi Audio Jack as /devices/soc.0/sound.6/sound/card0/input4
  663. [ 13.081781] sndhdmi sound.7: sndhdmi <-> 1c22800.daudio mapping ok
  664. [ 13.089517] TCP: cubic registered
  665. [ 13.093254] NET: Registered protocol family 10
  666. [ 13.098912] sit: IPv6 over IPv4 tunneling driver
  667. [ 13.104572] NET: Registered protocol family 17
  668. [ 13.109777] 8021q: 802.1Q VLAN Support v1.8
  669. [ 13.114438] Key type dns_resolver registered
  670. [ 13.119332] Registering SWP/SWPB emulation handler
  671. [ 13.124855] registered taskstats version 1
  672. [ 13.130227] Key type encrypted registered
  673. [ 13.134618] AppArmor: AppArmor sha1 policy hashing enabled
  674. [ 13.141482] sunxi-rtc 1f00000.rtc: setting system clock to 2016-02-11 16:30:33 UTC (1455208233)
  675. [ 13.151783] input: sunxi-ths as /devices/virtual/input/input5
  676. [ 13.158229] thermal thermal_zone0: failed to read out thermal zone 0
  677. [ 13.165581] ALSA device list:
  678. [ 13.168816] #0: audiocodec
  679. [ 13.171981] #1: sndhdmi
  680. [ 13.175082] md: Waiting for all devices to be available before autodetect
  681. [ 13.182519] md: If you don't use raid, use raid=noautodetect
  682. [ 13.189129] md: Autodetecting RAID arrays.
  683. [ 13.193622] md: Scanned 0 and added 0 devices.
  684. [ 13.198469] md: autorun ...
  685. [ 13.201529] md: ... autorun DONE.
  686. [ 13.205288] RAMDISK: Couldn't find valid RAM disk image starting at 0.
  687. [ 13.217398] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  688. [ 13.226933] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  689. [ 13.251726] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  690. [ 13.260625] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  691. [ 13.269657] devtmpfs: mounted
  692. [ 13.273190] Freeing unused kernel memory: 516K (ffffffc0009b0000 - ffffffc000a31000)
  693. [ 13.445940] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  694. [ 13.465990] systemd[1]: Detected architecture arm64.
  695.  
  696. Welcome to Ubuntu 16.04.6 LTS!
  697.  
  698. [ 13.497425] systemd[1]: Set hostname to <pinebook>.
  699. [ 13.720107] systemd[1]: Listening on udev Kernel Socket.
  700. [ OK ] Listening on udev Kernel Socket.
  701. [ 13.742952] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  702. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  703. [ 13.772657] systemd[1]: Created slice User and Session Slice.
  704. [ OK ] Created slice User and Session Slice.
  705. [ 13.801983] systemd[1]: Listening on udev Control Socket.
  706. [ OK ] Listening on udev Control Socket.
  707. [ 13.831432] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  708. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  709. [ 13.860896] systemd[1]: Listening on fsck to fsckd communication Socket.
  710. [ OK ] Listening on fsck to fsckd communication Socket.
  711. [ 13.890620] systemd[1]: Created slice System Slice.
  712. [ OK ] Created slice System Slice.
  713. [ 13.910346] systemd[1]: Created slice system-serial\x2dgetty.slice.
  714. [ OK ] Created slice system-serial\x2dgetty.slice.
  715. [ 13.939582] systemd[1]: Reached target Slices.
  716. [ OK ] Reached target Slices.
  717. [ 13.959489] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  718. [ OK ] Created slice system-systemd\x2dfsck.slice.
  719. [ 13.988756] systemd[1]: Reached target Swap.
  720. [ OK ] Reached target Swap.
  721. [ 14.008544] systemd[1]: Listening on Syslog Socket.
  722. [ OK ] Listening on Syslog Socket.
  723. [ 14.031037] systemd[1]: Started Trigger resolvconf update for networkd DNS.
  724. [ OK ] Started Trigger resolvconf update for networkd DNS.
  725. [ 14.057661] systemd[1]: Reached target Remote File Systems (Pre).
  726. [ OK ] Reached target Remote File Systems (Pre).
  727. [ 14.087154] systemd[1]: Reached target Remote File Systems.
  728. [ OK ] Reached target Remote File Systems.
  729. [ 14.116896] systemd[1]: Listening on Journal Socket.
  730. [ OK ] Listening on Journal Socket.
  731. [ 14.138150] systemd[1]: Mounting Debug File System...
  732. Mounting Debug File System...
  733. [ 14.158657] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  734. Starting Create list of required st... nodes for the current kernel...
  735. [ 14.188756] systemd[1]: Starting Load Kernel Modules...
  736. Starting Load Kernel Modules...
  737. [ 14.217746] systemd[1]: Mounting POSIX Message Queue File System...
  738. Mounting POSIX Message Queue File System...
  739. [ 14.234805] cfg80211: Calling CRDA to update world regulatory domain
  740. [ 14.246585] systemd[1]: Starting Uncomplicated firewall...
  741. Starting Uncomplicated firewall...
  742. [ 14.276589] systemd[1]: Starting Nameserver information manager...
  743. Starting Nameserver information manager...
  744. [ 14.301390] RTL871X: module init start
  745. [ 14.305521] RTL871X: rtl8723bs-vq0 v4.3.16_13854.20150410_BTCOEX20150119-5844
  746. [ 14.307720] systemd[1]: Mounting Huge Pages File System...
  747. [ 14.319365] RTL871X: build time: Oct 15 2017 21:41:14
  748. [ 14.324891] RTL871X: rtl8723bs-vq0 BT-Coex version = BTCOEX20150119-5844
  749. [ 14.332216] sunxi-wlan wlan.23: bus_index: 1
  750. [ 14.337069] sunxi-wlan wlan.23: check wlan io_regulator voltage: 3300000
  751. Mounting Huge Pages File System...
  752. [ 14.364597] systemd[1]: Started Read required files in advance.
  753. [ OK ] Started Read required files in advance.
  754. [ 14.394523] systemd[1]: Started Braille Device Support.
  755. [ OK ] Started Braille Device Support.
  756. [ 14.423735] systemd[1]: Starting File System Check on Root Device...
  757. Starting File System Check on Root Device...
  758. [ 14.451384] systemd[1]: Reached target User and Group Name Lookups.
  759. [ 14.453337] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  760. [ 14.453429] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
  761. [ 14.453537] RTL871X: module init ret=0
  762. [ 14.480712] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  763. [ OK ] Reached target User and Group Name Lookups.
  764. [ 14.500941] Bluetooth: Core ver 2.16
  765. [ 14.504906] NET: Registered protocol family 31
  766. [ 14.509754] Bluetooth: HCI device and connection manager initialized
  767. [ 14.516784] Bluetooth: HCI socket layer initialized
  768. [ 14.517537] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
  769. [ 14.518887] systemd[1]: Starting Set console keymap...
  770. [ 14.534470] Bluetooth: L2CAP socket layer initialized
  771. [ 14.540015] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
  772. [ 14.540035] Bluetooth: SCO socket layer initialized
  773. [ 14.552013] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  774. Starting Set console keymap...
  775. [ 14.565837] Bluetooth: HCI UART driver ver 2.2
  776. [ 14.571983] Bluetooth: HCI H4 protocol initialized
  777. [ 14.572061] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  778. [ 14.588627] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 8, RTO !!
  779. [ 14.595537] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 18 width 1 timing LEGACY(SDR12) dt B
  780. [ 14.596148] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  781. [ 14.596236] Bluetooth: HCI BCSP protocol initialized
  782. [ 14.596239] Bluetooth: HCILL protocol initialized
  783. [ 14.596242] Bluetooth: HCIATH3K protocol initialized
  784. [ 14.596245] Bluetooth: HCI Three-wire UART (H5) protocol initialized
  785. [ 14.623772] [DISP]disp_module_init
  786. [ OK [ 14.644955] [DISP] disp_boot_para_parse,line:322:] Set up automount Arbitrary Exeof_property_read disp.init_disp fail
  787. cutab...ats File System Automoun[ 14.653581] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 18 width 1 timing SD-HS(SDR25) dt B
  788. [ 14.653635] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 18 width 1 timing SD-HS(SDR25) dt B
  789. [ 14.653703] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 18 width 4 timing SD-HS(SDR25) dt B
  790. t Point.
  791. [ 14.654371] mmc1: new high speed SDIO card at address 0001
  792. [ 14.701066] [DISP] init_disp:0x0
  793. [ 14.702682] systemd[1]: Listening on Journal Socket (/dev/log).
  794. [ 14.711099] [DISP] disp_boot_para_parse,line:322:of_property_read disp.boot_disp fail
  795. [ 14.719663] [DISP] boot_disp:0x0
  796. [ OK [ 14.723847] [DISP] disp_sys_script_get_item,line:193:] Listening on Journal Socket (/of_find_compatible_node allwinner,sunxi-lcd1 fail
  797. dev/log).
  798. [ 14.730201] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  799. [ 14.730321] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  800. [ 14.744887] [DISP] disp_lcd_set_bright,line:1164:NULL hdl!
  801. [ 14.744940] [DISP] disp_lcd_set_bright,line:1164:NULL hdl!
  802. [ 14.745794] [DISP] disp_boot_para_parse,line:322:of_property_read disp.fb_base fail
  803. [ 14.745796] [DISP] fb_base:0x0
  804. [ 14.785107] systemd[1]: Starting Journal Service...
  805. Starting Journal Service...
  806. [ 14.805687] systemd[1]: Reached target Encrypted Volumes.
  807. [ 14.816193] Console: switching to colour frame buffer device 170x48
  808. [ OK [ 14.843452] [DISP] lcd_clk_config,line:808:] Reached target Encrypted Volumdisp 0, clk: pll(560000000),clk(560000000),dclk(80000000) dsi_rate(560000000)
  809. clk real:pll(556875000),clk(556875000),dclk(79553571) dsi_rate(0)
  810. es.
  811. [ 14.854962] [DISP]disp_module_init finish
  812. [ 14.875290] hall: (D) hall_probe
  813. [ 14.875587] systemd[1]: Mounted Debug File System.
  814. [ 14.884112] hall: (D) gpio=364
  815. [ OK [ 14.887679] hall: (D) irq=13
  816. ] Mounted Debug File System.
  817. [ 14.892182] hall: (D) power_name=hall-vcc-18, voltage=1800
  818. [ 14.900809] hall: (I) get hall info success!
  819. [ 14.905779] systemd[1]: Mounted POSIX Message Queue File System.
  820. [ 14.906536] hall: (D) hall_power_get
  821. [ 14.906593] hall: (D) hall_power_on
  822. [ 14.907435] input: hall as /devices/virtual/input/input6
  823. [ 14.907579] hall: (I) input register ok
  824. [ 14.907660] hall: (D) hall_isr
  825. [ 14.907667] hall: (I) hall probe success
  826. [ 14.907683] hall: (I) HALL_OPEN
  827. [ OK ] Mounted POSIX Message Queue File System.
  828. [ 14.955249] RTL871X: module init start
  829. [ 14.959352] RTL871X: rtl8723bs v4.3.16_13854.20150410_BTCOEX20150119-5844
  830. [ 14.966799] RTL871X: build time: Oct 15 2017 21:41:13
  831. [ 14.967189] systemd[1]: Mounted Huge Pages File System.
  832. [ 14.978041] RTL871X: rtl8723bs BT-Coex version = BTCOEX20150119-5844
  833. [ 14.984998] sunxi-wlan wlan.23: bus_index: 1
  834. [ OK ] Mounted Huge Pages File System.
  835. [ 15.012577] systemd[1]: Started Journal Service.
  836. [ OK ] Started Journal Service.
  837. [ 15.021926]
  838. [ 15.021926] lcd_edp_tx_rate=2,
  839. [ 15.021926] lcd_edp_tx_lane=1,
  840. [ 15.021926] lcd_edp_colordepth=1,
  841. [ 15.021926] lcd_model_name=2
  842. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  843. [ 15.052244] ANX9807 Chip found
  844. [ OK ] Started Uncomplicated firewall.
  845. [ OK ] Started File System Check on R[ 15.090816] hci: ERR: sunxi_ehci is disable, can not disable again
  846. oot Device.
  847. [ 15.099048] hci: ERR: sunxi_ohci is disable, can not disable again
  848. [ 15.103034] RTL871X: module init ret=0
  849. [ OK [ 15.112706] [ehci0-controller]: sunxi_usb_enable_ehci
  850. ] Started Set console keymap.
  851. [ 15.119321] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000b57958, 0x:ffffff8000094000, irq_no:68
  852. [ 15.135935] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  853. [ OK ] Started Nameserver information[ 15.150415] ..................................clock is detected.
  854. manager.
  855. [ 15.151601] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 3
  856. [ 15.160142] RTL871X: module init start
  857. [ 15.160146] RTL871X: rtl8723cs v4.3.22.9_16440.20151221_BTCOEX20151214-0700
  858. [ 15.160148] RTL871X: build time: Oct 15 2017 21:41:15
  859. [ 15.160149] RTL871X: rtl8723cs BT-Coex version = BTCOEX20151214-0700
  860. [ 15.160160] sunxi-wlan wlan.23: bus_index: 1
  861. [ 15.205527] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc07c983e18
  862. [ 15.219256] ..................................clock is stable.
  863. [ 15.228795] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
  864. [ 15.237214] hub 3-0:1.0: USB hub found
  865. [ 15.242851] hub 3-0:1.0: 1 port detected
  866. [ 15.247664] [ohci0-controller]: sunxi_usb_enable_ohci
  867. [ 15.254170] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000b574b8
  868. [ 15.264616] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  869. [ 15.274511] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 4
  870. [ 15.284205] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0xffffffc07c983d50
  871. [ 15.299068] RTL871X: rtw_read_efuse_from_file open /system/etc/wifi/wifi_efuse_8723cs.map fail, err:-2
  872. [ 15.309453] RTL871X: ERROR invalid phy efuse and read from file fail, will use driver default!!
  873. [ OK ] [ 15.319142] RTL871X: rtw_read_macaddr_from_file open /data/misc/wifi/wifimac.txt fail, err:-2
  874. Started File System Check Daemon to report status.
  875. [ OK ] Reached target Network (Pre).
  876. [ 15.351226] hub 4-0:1.0: USB hub found
  877. [ 15.356100] hub 4-0:1.0: 1 port detected
  878. Starting Remount Root and Kernel File Systems...
  879. [ 15.382566] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  880. [ 15.386290] ==================bl open
  881. Starting Create Static Device Nodes in /dev...
  882. [ OK ] Started Remount Root and Kernel File Systems.
  883. [ OK ] Started Create Static Device Nodes in /dev.
  884. Starting udev Kernel Device Manager...
  885. [ 15.485106] RTL871X: ERROR invalid mac addr:00:00:00:00:00:00, assign chipid MAC
  886. [ 15.493695] chipid-sunxi serial 8400503443184015014e
  887. [ OK [ 15.501123] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=00:e0:4c:94:8d:09
  888. ] Reached target Local File Syst[ 15.509639] RTL871X: rtw_ndev_init(p2p0) if2 mac_addr=02:e0:4c:94:8d:09
  889. ems (Pre).
  890. [ 15.519738] RTL871X: module init ret=0
  891. Starting Flush Journal to Persistent Storage...
  892. Starting udev Coldplug all Devices...
  893. Starting Load/Save Random Seed...
  894. [ OK ] Started Load Kernel Modules.
  895. [ OK ] Started Load/Save Random Seed.
  896. [ OK ] Started udev Kernel Device Manager.
  897. [ 15.702145] systemd-journald[156]: Received request to flush runtime journal from PID 1
  898. [ OK ] Created slice system-systemd\x2dbacklight.slice.
  899. Starting Load/Save Screen Backlight Brightness of backlight:lcd0...
  900. [ 15.742908] cfg80211: World regulatory domain updated:
  901. [ 15.748569] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  902. Mounting FUSE Control File Syste[ 15.767779] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  903. m...
  904. [ 15.779806] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  905. [ 15.788716] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  906. [ 15.797494] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  907. Starting Apply Kernel Variables...
  908. [ 15.811433] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  909. [ 15.820154] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
  910. [ 15.828640] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  911. [ 15.837188] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  912. Mounting Configuration File System...
  913. [ OK ] Mounted Configuration File System.
  914. [ OK ] Mounted FUSE Control File System.
  915. [ OK ] Started Flush Journal to Persistent Storage.
  916. [ OK ] Started udev Coldplug all Devices.
  917. [ OK ] Started Load/Save Screen Backlight Brightness of backlight:lcd0.
  918. [ OK ] Started Apply Kernel Variables.
  919. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  920. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  921. Starting Load/Save RF Kill Switch Status...
  922. [ OK ] Started Load/Save RF Kill Switch Status.
  923. [ OK ] Found device /dev/ttyS0.
  924. [ 16.441791] [VFE_ERR]Error registering v4l2 subdevice No such device!
  925. [ 16.451186] [VFE_ERR]vfe sensor register check error at input_num = 0
  926. [ OK ] Reached target Sound Card.
  927. [ OK ] Found device /dev/mmcblk0p1.
  928. Starting File System Check on /dev/mmcblk0p1...
  929. [ OK ] Started File System Check on /dev/mmcblk0p1.
  930. Mounting /boot...
  931. [ OK ] Mounted /boot.
  932. [ OK ] Reached target Local File Systems.
  933. Starting Create Volatile Files and Directories...
  934. Starting Tell Plymouth To Write Out Runtime Data...
  935. Starting Raise network interfaces...
  936. Starting Set console font and keymap...
  937. [ OK ] Started Create Volatile Files and Directories.
  938. [ OK ] Started Tell Plymouth To Write Out Runtime Data.
  939. [ OK ] Reached target System Time Synchronized.
  940. Starting Update UTMP about System Boot/Shutdown...
  941. [ OK ] Started Update UTMP about System Boot/Shutdown.
  942. [ OK ] Reached target System Initialization.
  943. [ OK ] Listening on D-Bus System Message Bus Socket.
  944. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  945. [ OK ] Started CUPS Scheduler.
  946. [ OK ] Reached target Paths.
  947. [ OK ] Started Daily apt download activities.
  948. [ OK ] Started Daily apt upgrade and clean activities.
  949. [ OK ] Listening on CUPS Scheduler.
  950. [ OK ] Reached target Sockets.
  951. [ OK ] Reached target Basic System.
  952. Starting Avahi mDNS/DNS-SD Stack...
  953. [ OK ] Started CUPS Scheduler.
  954. Starting Bluetooth service...
  955. Starting Initializes zram swaping...
  956. Starting Modem Manager...
  957. Starting LSB: automatic crash report generation...
  958. [ OK ] Started D-Bus System Message Bus.
  959. [ OK ] Started Bluetooth service.
  960. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  961. Starting Generate SSH keys if not there...
  962. [ OK ] Started Make remote CUPS printers available locally.
  963. Starting Enable headpohones...
  964. ø
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!