API tools faq
paste
Guest User

Untitled

a guest
May 1st, 2022
24
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 64.35 KB | None | 0 0
raw download clone embed print report
  1. DDR Version 1.25 20210517
  2. In
  3. channel 0
  4. CS = 0
  5. MR0=0x98
  6. MR4=0x1
  7. MR5=0xFF
  8. MR8=0x8
  9. MR12=0x72
  10. MR14=0x72
  11. MR18=0x0
  12. MR19=0x0
  13. MR24=0x8
  14. MR25=0x0
  15. CS = 1
  16. MR0=0x18
  17. MR4=0x1
  18. MR5=0xFF
  19. MR8=0x8
  20. MR12=0x72
  21. MR14=0x72
  22. MR18=0x0
  23. MR19=0x0
  24. MR24=0x8
  25. MR25=0x0
  26. channel 1
  27. CS = 0
  28. MR0=0x98
  29. MR4=0x1
  30. MR5=0xFF
  31. MR8=0x8
  32. MR12=0x72
  33. MR14=0x72
  34. MR18=0x0
  35. MR19=0x0
  36. MR24=0x8
  37. MR25=0x0
  38. CS = 1
  39. MR0=0x18
  40. MR4=0x1
  41. MR5=0xFF
  42. MR8=0x8
  43. MR12=0x72
  44. MR14=0x72
  45. MR18=0x0
  46. MR19=0x0
  47. MR24=0x8
  48. MR25=0x0
  49. channel 0 training pass!
  50. channel 1 training pass!
  51. change freq to 416MHz 0,1
  52. Channel 0: LPDDR4,416MHz
  53. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  54. Channel 1: LPDDR4,416MHz
  55. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  56. 256B stride
  57. channel 0
  58. CS = 0
  59. MR0=0x98
  60. MR4=0x1
  61. MR5=0xFF
  62. MR8=0x8
  63. MR12=0x72
  64. MR14=0x72
  65. MR18=0x0
  66. MR19=0x0
  67. MR24=0x8
  68. MR25=0x0
  69. CS = 1
  70. MR0=0x18
  71. MR4=0x1
  72. MR5=0xFF
  73. MR8=0x8
  74. MR12=0x72
  75. MR14=0x72
  76. MR18=0x0
  77. MR19=0x0
  78. MR24=0x8
  79. MR25=0x0
  80. channel 1
  81. CS = 0
  82. MR0=0x98
  83. MR4=0x1
  84. MR5=0xFF
  85. MR8=0x8
  86. MR12=0x72
  87. MR14=0x72
  88. MR18=0x0
  89. MR19=0x0
  90. MR24=0x8
  91. MR25=0x0
  92. CS = 1
  93. MR0=0x18
  94. MR4=0x1
  95. MR5=0xFF
  96. MR8=0x8
  97. MR12=0x72
  98. MR14=0x72
  99. MR18=0x0
  100. MR19=0x0
  101. MR24=0x8
  102. MR25=0x0
  103. channel 0 training pass!
  104. channel 1 training pass!
  105. channel 0, cs 0, advanced training done
  106. ecureInit read PBA: 0x4
  107. SecureInit read PBA: 0x404
  108. SecureInit read PBA: 0x804
  109. SecureInit read PBA: 0xc04
  110. SecureInit read PBA: 0x1004
  111. SecureInit read PBA: 0x1404
  112. SecureInit read PBA: 0x1804
  113. SecureInit read PBA: 0x1c04
  114. SecureInit ret = 0, SecureMode = 0
  115. atags_set_bootdev: ret:(0)
  116. GPT part: 0, name: bootloader, start:0x40, size:0x7fc0
  117. GPT part: 1, name: uboot-env, start:0x8000, size:0x200
  118. GPT part: 2, name: recovery_boot, start:0x8800, size:0x20000
  119. no find partition:uboot.
  120. Trust Addr:0x4000, 0x58334c42
  121. No find bl30.bin
  122. Load uboot, ReadLba = 2000
  123. Load OK, addr=0x200000, size=0xda5c8
  124. RunBL31 0x40000 @ 106015 us
  125. NOTICE: BL31: v1.3(release):845ee93
  126. NOTICE: BL31: Built : 15:51:11, Jul 22 2020
  127. NOTICE: BL31: Rockchip release version: v1.1
  128. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  129. INFO: Using opteed sec cpu_context!
  130. INFO: boot cpu mask: 0
  131. INFO: plat_rockchip_pmu_init(1196): pd status 3e
  132. INFO: BL31: Initializing runtime services
  133. INFO: BL31: Initializing BL32
  134. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-266-gee81607c #1 Mon Aug 17 09:23:30 UTC 2020 aarch64)
  135.  
  136. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
  137.  
  138. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
  139. INFO: BL31: Preparing for EL3 exit to normal world
  140. INFO: Entry point address = 0x200000
  141. INFO: SPSR = 0x3c9
  142. ;35r
  143. U-Boot 204-rc4-ga984f7f12245 (Apr 27 2022 - 10:09:13 +0800)
  144.  
  145. Reset cause: PORr
  146. el: Pine64 PinePhone Pro
  147. ndAM:O1;35r
  148. Hit any key to stop autoboot: 0
  149. 3637 bytes read in 14 ms (252.9 KiB/s)
  150. ## Executing script at 03000000
  151. Could not find "misc" partition
  152. ** Bad device specification mmc 0#misc **
  153. Couldn't find partition mmc 0#misc
  154.  
  155.  
  156. U-Boot 2022.04-rc4-ga984f7f12245 (Apr 27 2022 - 10:09:13 +0800)
  157.  
  158. SoC: Rockchip rk3399
  159. Reset cause: POR
  160. Model: Pine64 PinePhone Pro
  161. DRAM: 3.9 GiB
  162. nnel 0, cs 0, advanced training done
  163. 0, cs 1, advanced training done
  164. channel 1, cs 0, advanced training done
  165. 0
  166. 3637 bytes read in 14 ms (252.9 KiB/s)
  167. ## Executing script at 03000000
  168. Could not find "misc" partytion
  169. *jevye specification mm 0#misc **
  170. Couldn't find partition mmc 0#misc
  171. Writing GPT: success!
  172. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  173. ** Bad device specification mmc bootloader_a **
  174. Couldn't find partition mmc bootloader_a
  175. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  176. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  177. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  178. Starting download of 16744448 bytes
  179. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  180. ..........................................................................
  181. .....................................................
  182. downloading of 16744448 bytes finished
  183. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  184. Flashing Raw Image
  185. ........ wrote 16744448 bytes to 'bootloader'
  186. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  187. ** Bad device specification mmc uboot-env_a **
  188. Couldn't find partition mmc uboot-env_a
  189. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  190. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  191. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  192. Starting download of 262144 bytes
  193. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  194. ..
  195. downloading of 262144 bytes finished
  196. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  197. Flashing Raw Image
  198. ........ wrote 262144 bytes to 'uboot-env'
  199. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  200. ** Bad device specification mmc recovery_boot_a **
  201. Couldn't find partition mmc recovery_boot_a
  202. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  203. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  204. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  205. Starting download of 67108864 bytes
  206. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  207. ..........................................................................
  208. ..........................................................................
  209. ..........................................................................
  210. ..........................................................................
  211. ..........................................................................
  212. ..........................................................................
  213. ....................................................................
  214. downloading of 67108864 bytes finished
  215. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  216. Flashing Raw Image
  217. ........ wrote 67108864 bytes to 'recovery_boot'
  218. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  219. ** Bad device specification mmc dtbo_a_a **
  220. Couldn't find partition mmc dtbo_a_a
  221. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  222. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  223. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  224. Starting download of 74404 bytes
  225. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  226.  
  227. downloading of 74404 bytes finished
  228. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  229. Flashing Raw Image
  230. ........ wrote 74752 bytes to 'dtbo_a'
  231. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  232. ** Bad device specification mmc misc_a **
  233. Couldn't find partition mmc misc_a
  234. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  235. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  236. Erasing blocks 394240 to 395264 due to alignment
  237. ........ erased 524288 bytes from 'misc'
  238. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  239. (NULL udevice *): request 00000000f4f44e80 was not queued to ep1in-bulk
  240. resetting ...
  241. DDR Version 1.25 20210517
  242. In
  243. soft reset
  244. SRX
  245. channel 0
  246. CS = 0
  247. MR0=0x98
  248. MR4=0x1
  249. MR5=0xFF
  250. MR8=0x8
  251. MR12=0x72
  252. MR14=0x72
  253. MR18=0x0
  254. MR19=0x0
  255. MR24=0x8
  256. MR25=0x0
  257. CS = 1
  258. MR0=0x18
  259. MR4=0x1
  260. MR5=0xFF
  261. MR8=0x8
  262. MR12=0x72
  263. MR14=0x72
  264. MR18=0x0
  265. MR19=0x0
  266. MR24=0x8
  267. MR25=0x0
  268. channel 1
  269. CS = 0
  270. MR0=0x98
  271. MR4=0x1
  272. MR5=0xFF
  273. MR8=0x8
  274. MR12=0x72
  275. MR14=0x72
  276. MR18=0x0
  277. MR19=0x0
  278. MR24=0x8
  279. MR25=0x0
  280. CS = 1
  281. MR0=0x18
  282. MR4=0x1
  283. MR5=0xFF
  284. MR8=0x8
  285. MR12=0x72
  286. MR14=0x72
  287. MR18=0x0
  288. MR19=0x0
  289. MR24=0x8
  290. MR25=0x0
  291. channel 0 training pass!
  292. channel 1 training pass!
  293. change freq to 416MHz 0,1
  294. Channel 0: LPDDR4,416MHz
  295. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  296. Channel 1: LPDDR4,416MHz
  297. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  298. 256B stride
  299. channel 0
  300. CS = 0
  301. MR0=0x98
  302. MR4=0x1
  303. MR5=0xFF
  304. MR8=0x8
  305. MR12=0x72
  306. MR14=0x72
  307. MR18=0x0
  308. MR19=0x0
  309. MR24=0x8
  310. MR25=0x0
  311. CS = 1
  312. MR0=0x18
  313. MR4=0x1
  314. MR5=0xFF
  315. MR8=0x8
  316. MR12=0x72
  317. MR14=0x72
  318. MR18=0x0
  319. MR19=0x0
  320. MR24=0x8
  321. MR25=0x0
  322. channel 1
  323. CS = 0
  324. MR0=0x98
  325. MR4=0x1
  326. MR5=0xFF
  327. MR8=0x8
  328. MR12=0x72
  329. MR14=0x72
  330. MR18=0x0
  331. MR19=0x0
  332. MR24=0x8
  333. MR25=0x0
  334. CS = 1
  335. MR0=0x18
  336. MR4=0x1
  337. MR5=0xFF
  338. MR8=0x8
  339. MR12=0x72
  340. MR14=0x72
  341. MR18=0x0
  342. MR19=0x0
  343. MR24=0x8
  344. MR25=0x0
  345. channel 0 training pass!
  346. channel 1 training pass!
  347. channel 0, cs 0, advanced training done
  348. channel 0, cs 1, advanced training done
  349. channel 1, cs 0, advanced training done
  350. channel 1, cs 1, advanced training done
  351. change freq to 856MHz 1,0
  352. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  353. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  354. pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
  355. ddr_set_rate to 328MHZ
  356. ddr_set_rate to 666MHZ
  357. ddr_set_rate to 928MHZ
  358. channel 0, cs 0, advanced training done
  359. channel 0, cs 1, advanced training done
  360. channel 1, cs 0, advanced training done
  361. channel 1, cs 1, advanced training done
  362. ddr_set_rate to 416MHZ, ctl_index 0
  363. ddr_set_rate to 856MHZ, ctl_index 1
  364. support 416 856 328 666 928 MHz, current 856MHz
  365. OUT
  366. Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
  367. CPUId = 0x0
  368. ChipType = 0x10, 437
  369. SdmmcInit=2 0
  370. BootCapSize=100000
  371. UserCapSize=14910MB
  372. FwPartOffset=2000 , 100000
  373. mmc0:cmd8,20
  374. mmc0:cmd5,20
  375. mmc0:cmd55,20
  376. mmc0:cmd1,20
  377. mmc0:cmd8,20
  378. mmc0:cmd5,20
  379. mmc0:cmd55,20
  380. mmc0:cmd1,20
  381. mmc0:cmd8,20
  382. mmc0:cmd5,20
  383. mmc0:cmd55,20
  384. mmc0:cmd1,20
  385. SdmmcInit=0 1
  386. StorageInit ok = 68309
  387. SecureMode = 0
  388. SecureInit read PBA: 0x4
  389. SecureInit read PBA: 0x404
  390. SecureInit read PBA: 0x804
  391. SecureInit read PBA: 0xc04
  392. SecureInit read PBA: 0x1004
  393. SecureInit read PBA: 0x1404
  394. SecureInit read PBA: 0x1804
  395. SecureInit read PBA: 0x1c04
  396. SecureInit ret = 0, SecureMode = 0
  397. atags_set_bootdev: ret:(0)
  398. GPT part: 0, name: bootloader, start:0x40, size:0x3ffc0
  399. GPT part: 1, name: uboot-env, start:0x40000, size:0x400
  400. GPT part: 2, name: recovery_boot, start:0x40400, size:0x20000
  401. GPT part: 3, name: misc, start:0x60400, size:0x400
  402. GPT part: 4, name: boot, start:0x60800, size:0x20000
  403. GPT part: 5, name: dtbo_a, start:0x80800, size:0x4000
  404. GPT part: 6, name: vbmeta_a, start:0x84800, size:0x400
  405. GPT part: 7, name: super, start:0x84c00, size:0x384000
  406. GPT part: 8, name: metadata, start:0x408c00, size:0x8000
  407. GPT part: 9, name: userdata, start:0x410c00, size:0x190e3df
  408. no find partition:uboot.
  409. Trust Addr:0x4000, 0x58334c42
  410. No find bl30.bin
  411. Load uboot, ReadLba = 2000
  412. Load OK, addr=0x200000, size=0xda5c8
  413. RunBL31 0x40000 @ 112988 us
  414. NOTICE: BL31: v1.3(release):845ee93
  415. NOTICE: BL31: Built : 15:51:11, Jul 22 2020
  416. NOTICE: BL31: Rockchip release version: v1.1
  417. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  418. INFO: Using opteed sec cpu_context!
  419. INFO: boot cpu mask: 0
  420. INFO: plat_rockchip_pmu_init(1196): pd status 3e
  421. INFO: BL31: Initializing runtime services
  422. INFO: BL31: Initializing BL32
  423. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-266-gee81607c #1 Mon Aug 17 09:23:30 UTC 2020 aarch64)
  424.  
  425. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
  426.  
  427. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
  428. INFO: BL31: Preparing for EL3 exit to normal world
  429. INFO: Entry point address = 0x200000
  430. INFO: SPSR = 0x3c9
  431.  
  432.  
  433. U-Boot 2022.04-rc4-ga984f7f12245 (Apr 27 2022 - 10:09:13 +0800)
  434.  
  435. SoC: Rockchip rk3399
  436. Reset cause: RST
  437. Model: Pine64 PinePhone Pro
  438. DRAM: 3.9 GiB
  439. Core: 259 devices, 20 uclasses, devicetree: separate
  440. MMC: mmc@fe310000: 2, mmc@fe320000: 1, mmc@fe330000: 0
  441. Loading Environment from SPIFlash... Invalid bus 0 (err=-19)
  442. *** Warning - spi_flash_probe_bus_cs() failed, using default environment
  443.  
  444. In: serial
  445. Out: serial
  446. Err: serial
  447. Model: Pine64 PinePhone Pro
  448. Net: No ethernet found.
  449. starting USB...
  450. No working controllers found
  451. Hit any key to stop autoboot: 0
  452. 3637 bytes read in 16 ms (221.7 KiB/s)
  453. ## Executing script at 03000000
  454. ANDROID: Invalid CRC-32 (expected 807077e9, found 00000000),re-initializing A/B metadata.
  455. ANDROID: Attempting slot a, tries remaining 7
  456. ANDROID: Booting slot: a
  457. switch to partitions #0, OK
  458. mmc0(part 0) is current device
  459.  
  460. MMC read: dev # 0, block # 263168, count 131072 ... 131072 blocks read: OK
  461. index start size
  462. ------------------------------------------------
  463. 0 0000000008000000 0000000008000000
  464. ## Booting Android Image at 0x10008000 ...
  465. Kernel load addr 0x02080000 size 17810 KiB
  466. Kernel command line: androidboot.hardware=pinephonepro earlyprintk console=ttyS2,1500000n8 printk.devkmsg=on printk.time
  467. =1 buildvariant=userdebug
  468. RAM disk load addr 0x05300000 size 13525 KiB
  469. Uncompressing Kernel Image
  470. Loading Ramdisk to f41d7000, end f4f0c36e ... OK
  471. Loading Device Tree to 00000000f41b9000, end 00000000f41d6fff ... OK
  472.  
  473. Starting kernel ...
  474.  
  475. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  476. [ 0.000000] Linux version 5.17.0-android13-0-GloDroid-gcaea44ae4d05 (nobody@android-build) (Android (8460943, based o
  477. n r450784c) clang version 14.0.5 (https://android.googlesource.com/toolchain/llvm-project 4c603efb0cca074e9238af8b4106c3
  478. 0add4418f6), LLD 14.0.5) #1 SMP PREEMPT Wed Apr 27 10:11:07 CST 2022
  479. [ 0.000000] Machine model: Leez RK3399 P710
  480. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
  481. [ 0.000000] Zone ranges:
  482. [ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff]
  483. [ 0.000000] DMA32 empty
  484. [ 0.000000] Normal empty
  485. [ 0.000000] Movable zone start for each node
  486. [ 0.000000] Early memory node ranges
  487. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
  488. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
  489. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  490. [ 0.000000] cma: Reserved 256 MiB at 0x00000000e0000000
  491. [ 0.000000] psci: probing for conduit method from DT.
  492. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  493. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  494. [ 0.000000] psci: Trusted OS migration not required
  495. [ 0.000000] psci: SMC Calling Convention v1.0
  496. [ 0.000000] percpu: Embedded 29 pages/cpu s79384 r8192 d31208 u118784
  497. [ 0.000000] pcpu-alloc: s79384 r8192 d31208 u118784 alloc=29*4096
  498. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  499. [ 0.000000] Detected VIPT I-cache on CPU0
  500. [ 0.000000] CPU features: detected: GIC system register CPU interface
  501. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  502. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  503. [ 0.000000] CPU features: detected: ARM erratum 845719
  504. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
  505. [ 0.000000] Kernel command line: init=/init rootwait ro androidboot.boottime=223.708 androidboot.selinux=permissive
  506. androidboot.revision=1.0 androidboot.board_id=0x1234567 androidboot.serialno=b26fbe4f45669d85 androidboot.slot_suffix=_a
  507. firmware_class.path=/vendor/etc/firmware androidboot.verifiedbootstate=orange printk.devkmsg=on androidboot.boot_devic
  508. es=fe330000.mmc androidboot.dtbo_idx=0,1 androidboot.hardware=pinephonepro earlyprintk console=ttyS2,1500000n8 printk.de
  509. vkmsg=on printk.time=1 buildvariant=userdebug
  510. [ 0.000000] Unknown kernel command line parameters "earlyprintk buildvariant=userdebug", will be passed to user space
  511. .
  512. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  513. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  514. [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  515. [ 0.000000] Memory: 3533972K/4061184K available (16768K kernel code, 5504K rwdata, 10228K rodata, 5376K init, 1620K b
  516. ss, 265068K reserved, 262144K cma-reserved)
  517. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  518. [ 0.000000] ftrace: allocating 51972 entries in 204 pages
  519. [ 0.000000] ftrace: allocated 204 pages with 4 groups
  520. [ 0.000000] trace event string verifier disabled
  521. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  522. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  523. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  524. [ 0.000000] Rude variant of Tasks RCU enabled.
  525. [ 0.000000] Tracing variant of Tasks RCU enabled.
  526. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
  527. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  528. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  529. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  530. [ 0.000000] GICv3: 256 SPIs implemented
  531. [ 0.000000] GICv3: 0 Extended SPIs implemented
  532. [ 0.000000] GICv3: Distributor has no Range Selector support
  533. [ 0.000000] Root IRQ handler: gic_handle_irq
  534. [ 0.000000] GICv3: 16 PPIs implemented
  535. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  536. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  537. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @800000 (flat, esz 8, psz 64K, shr 0)
  538. [ 0.000000] ITS: using cache flushing for cmd queue
  539. [ 0.000000] GICv3: using LPI property table @0x00000000003d0000
  540. [ 0.000000] GIC: using cache flushing for LPI property table
  541. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000003e0000
  542. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/c
  543. pu@3[3] }
  544. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  545. [ 0.000000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
  546. [ 0.000000] random: get_random_bytes called from start_kernel+0x22c/0x3e0 with crng_init=0
  547. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  548. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592
  549. ns
  550. [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  551. [ 0.003250] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
  552. [ 0.003331] pid_max: default: 32768 minimum: 301
  553. [ 0.003651] LSM: Security Framework initializing
  554. [ 0.003880] SELinux: Initializing.
  555. [ 0.004392] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  556. [ 0.004510] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  557. [ 0.014139] cblist_init_generic: Setting adjustable number of callback queues.
  558. [ 0.014208] cblist_init_generic: Setting shift to 3 and lim to 1.
  559. [ 0.014894] cblist_init_generic: Setting shift to 3 and lim to 1.
  560. [ 0.015428] cblist_init_generic: Setting shift to 3 and lim to 1.
  561. [ 0.016630] rcu: Hierarchical SRCU implementation.
  562. [ 0.020756] Platform MSI: interrupt-controller@fee20000 domain created
  563. [ 0.021816] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  564. [ 0.026059] smp: Bringing up secondary CPUs ...
  565. [ 0.029603] Detected VIPT I-cache on CPU1
  566. [ 0.029728] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  567. [ 0.029784] GICv3: CPU1: using allocated LPI pending table @0x00000000003f0000
  568. [ 0.029925] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  569. [ 0.034353] Detected VIPT I-cache on CPU2
  570. [ 0.034477] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  571. [ 0.034533] GICv3: CPU2: using allocated LPI pending table @0x0000000000880000
  572. [ 0.034677] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  573. [ 0.039032] Detected VIPT I-cache on CPU3
  574. [ 0.039157] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  575. [ 0.039212] GICv3: CPU3: using allocated LPI pending table @0x0000000000890000
  576. [ 0.039353] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  577. [ 0.052723] CPU features: detected: Spectre-v2
  578. [ 0.053203] CPU features: detected: Spectre-v3a
  579. [ 0.053492] CPU features: detected: Spectre-v4
  580. [ 0.053740] CPU features: detected: Spectre-BHB
  581. [ 0.054034] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  582. [ 0.054304] Detected PIPT I-cache on CPU4
  583. [ 0.055637] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  584. [ 0.056358] GICv3: CPU4: using allocated LPI pending table @0x00000000008a0000
  585. [ 0.057942] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  586. [ 0.082310] Detected PIPT I-cache on CPU5
  587. [ 0.083903] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  588. [ 0.084650] GICv3: CPU5: using allocated LPI pending table @0x00000000008b0000
  589. [ 0.086256] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  590. [ 0.096116] smp: Brought up 1 node, 6 CPUs
  591. [ 0.096546] SMP: Total of 6 processors activated.
  592. [ 0.096600] CPU features: detected: 32-bit EL0 Support
  593. [ 0.096632] CPU features: detected: 32-bit EL1 Support
  594. [ 0.096681] CPU features: detected: CRC32 instructions
  595. [ 0.101513] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  596. [ 0.484069] CPU: All CPU(s) started at EL2
  597. [ 0.486059] alternatives: patching kernel code
  598. [ 0.496314] devtmpfs: initialized
  599. [ 0.576993] Registered cp15_barrier emulation handler
  600. [ 0.577445] Registered setend emulation handler
  601. [ 0.577522] KASLR disabled due to lack of seed
  602. [ 0.578539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  603. [ 0.578628] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  604. [ 0.609292] pinctrl core: initialized pinctrl subsystem
  605. [ 0.615628] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  606. [ 0.638956] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
  607. [ 0.647411] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  608. [ 0.651102] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  609. [ 0.651646] audit: initializing netlink subsys (disabled)
  610. [ 0.653036] audit: type=2000 audit(0.613:1): state=initialized audit_enabled=0 res=1
  611. [ 0.658782] thermal_sys: Registered thermal governor 'fair_share'
  612. [ 0.658822] thermal_sys: Registered thermal governor 'bang_bang'
  613. [ 0.658866] thermal_sys: Registered thermal governor 'step_wise'
  614. [ 0.662179] cpuidle: using governor ladder
  615. [ 0.662402] cpuidle: using governor menu
  616. [ 0.663883] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  617. [ 0.667630] ASID allocator initialised with 32768 entries
  618. [ 0.668099] Serial: AMBA PL011 UART driver
  619. [ 0.797860] platform ff770000.syscon:phy@f780: Fixing up cyclic dependency with fe330000.mmc
  620. [ 0.835852] platform ff940000.hdmi: Fixing up cyclic dependency with ff8f0000.vop
  621. [ 0.836424] platform ff940000.hdmi: Fixing up cyclic dependency with ff900000.vop
  622. [ 0.888621] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
  623. [ 0.892558] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
  624. [ 0.895994] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
  625. [ 0.899493] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
  626. [ 0.902599] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
  627. [ 0.992361] cryptd: max_cpu_qlen set to 1000
  628. [ 1.004447] iommu: Default domain type: Translated
  629. [ 1.004701] iommu: DMA domain TLB invalidation policy: strict mode
  630. [ 1.019122] vgaarb: loaded
  631. [ 1.021038] SCSI subsystem initialized
  632. [ 1.021278] libata version 3.00 loaded.
  633. [ 1.022406] usbcore: registered new interface driver usbfs
  634. [ 1.022666] usbcore: registered new interface driver hub
  635. [ 1.022907] usbcore: registered new device driver usb
  636. [ 1.025606] mc: Linux media interface: v0.10
  637. [ 1.025817] videodev: Linux video capture interface: v2.00
  638. [ 1.032107] Advanced Linux Sound Architecture Driver Initialized.
  639. [ 1.039599] clocksource: Switched to clocksource arch_sys_counter
  640. [ 1.538726] VFS: Disk quotas dquot_6.6.0
  641. [ 1.539246] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  642. [ 1.546241] NET: Registered PF_INET protocol family
  643. [ 1.547314] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  644. [ 1.559837] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  645. [ 1.560314] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  646. [ 1.561898] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  647. [ 1.564706] TCP: Hash tables configured (established 32768 bind 32768)
  648. [ 1.565872] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  649. [ 1.566523] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  650. [ 1.567830] NET: Registered PF_UNIX/PF_LOCAL protocol family
  651. [ 1.568022] PCI: CLS 0 bytes, default 64
  652. [ 1.584323] Trying to unpack rootfs image as initramfs...
  653. [ 1.594959] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  654. [ 1.603895] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  655. [ 1.608961] kvm [1]: IPA Size Limit: 40 bits
  656. [ 1.621592] kvm [1]: vgic-v2@fff20000
  657. [ 1.622210] kvm [1]: GIC system register CPU interface enabled
  658. [ 1.631828] kvm [1]: vgic interrupt IRQ18
  659. [ 1.639223] kvm [1]: Hyp mode initialized successfully
  660. [ 1.655393] Initialise system trusted keyrings
  661. [ 1.663047] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  662. [ 1.703421] zbud: loaded
  663. [ 1.714941] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  664. [ 1.737577] fuse: init (API version 7.36)
  665. [ 1.992082] NET: Registered PF_ALG protocol family
  666. [ 1.992841] xor: automatically using best checksumming function 32regs
  667. [ 1.992899] Key type asymmetric registered
  668. [ 1.992941] Asymmetric key parser 'x509' registered
  669. [ 1.992977] Asymmetric key parser 'pkcs8' registered
  670. [ 2.692143] Freeing initrd memory: 13524K
  671. [ 2.718353] alg: self-tests for CTR-KDF (hmac(sha256)) passed
  672. [ 2.719313] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  673. [ 2.788362] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  674. [ 2.788696] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  675. [ 2.797551] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  676. [ 2.797624] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  677. [ 2.822237] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  678. [ 2.888545] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 40, base_baud = 1500000) is a 16550A
  679. [ 2.889615] serial serial0: tty port ttyS0 registered
  680. [ 2.900541] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 41, base_baud = 1500000) is a 16550A
  681. [ 3.018845] printk: console [ttyS2] enabled
  682. [ 3.038028] rockchip-vop ff8f0000.vop: Adding to iommu group 2
  683. [ 3.043274] rockchip-vop ff900000.vop: Adding to iommu group 3
  684. [ 3.074189] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
  685. [ 3.075692] [drm] unsupported AFBC format[3231564e]
  686. [ 3.079534] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
  687. [ 3.091977] cacheinfo: Unable to detect cache hierarchy for CPU 0
  688. [ 3.220786] brd: module loaded
  689. [ 3.390147] loop: module loaded
  690. [ 3.593132] zram: Added device: zram0
  691. [ 3.623536] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
  692. [ 3.624553] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
  693. [ 3.628421] tun: Universal TUN/TAP device driver, 1.6
  694. [ 3.631289] igb: Intel(R) Gigabit Ethernet Network Driver
  695. [ 3.631890] igb: Copyright (c) 2007-2014 Intel Corporation.
  696. [ 3.632740] igbvf: Intel(R) Gigabit Virtual Function Network Driver
  697. [ 3.633338] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  698. [ 3.640264] PPP generic driver version 2.4.2
  699. [ 3.641788] PPP BSD Compression module registered
  700. [ 3.642257] PPP Deflate Compression module registered
  701. [ 3.645730] PPP MPPE Compression module registered
  702. [ 3.646201] NET: Registered PF_PPPOX protocol family
  703. [ 3.646750] PPTP driver version 0.8.5
  704. [ 3.648177] usbcore: registered new interface driver cdc_ether
  705. [ 3.648958] usbcore: registered new interface driver cdc_eem
  706. [ 3.649820] usbcore: registered new interface driver cdc_ncm
  707. [ 3.650578] usbcore: registered new interface driver cdc_mbim
  708. [ 3.668363] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  709. [ 3.669697] ehci-pci: EHCI PCI platform driver
  710. [ 3.670362] ehci-platform: EHCI generic platform driver
  711. [ 3.672488] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  712. [ 3.673177] ohci-pci: OHCI PCI platform driver
  713. [ 3.673863] ohci-platform: OHCI generic platform driver
  714. [ 3.678674] usbcore: registered new interface driver cdc_acm
  715. [ 3.679226] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  716. [ 3.680218] usbcore: registered new interface driver cdc_wdm
  717. [ 3.683840] usbcore: registered new interface driver uas
  718. [ 3.684656] usbcore: registered new interface driver usb-storage
  719. [ 3.685719] usbcore: registered new interface driver option
  720. [ 3.686350] usbserial: USB Serial support registered for GSM modem (1-port)
  721. [ 3.687248] usbcore: registered new interface driver qcaux
  722. [ 3.687936] usbserial: USB Serial support registered for qcaux
  723. [ 3.688701] usbcore: registered new interface driver qcserial
  724. [ 3.689365] usbserial: USB Serial support registered for Qualcomm USB modem
  725. [ 3.690229] usbcore: registered new interface driver usb_serial_simple
  726. [ 3.690999] usbserial: USB Serial support registered for carelink
  727. [ 3.691729] usbserial: USB Serial support registered for zio
  728. [ 3.692361] usbserial: USB Serial support registered for funsoft
  729. [ 3.693090] usbserial: USB Serial support registered for flashloader
  730. [ 3.693839] usbserial: USB Serial support registered for google
  731. [ 3.694580] usbserial: USB Serial support registered for libtransistor
  732. [ 3.695287] usbserial: USB Serial support registered for vivopay
  733. [ 3.696012] usbserial: USB Serial support registered for moto_modem
  734. [ 3.696756] usbserial: USB Serial support registered for motorola_tetra
  735. [ 3.697534] usbserial: USB Serial support registered for novatel_gps
  736. [ 3.698228] usbserial: USB Serial support registered for hp4x
  737. [ 3.698935] usbserial: USB Serial support registered for suunto
  738. [ 3.699651] usbserial: USB Serial support registered for siemens_mpi
  739. [ 3.705554] mousedev: PS/2 mouse device common for all mice
  740. [ 3.708644] usbcore: registered new interface driver xpad
  741. [ 3.709363] usbcore: registered new interface driver usb_acecad
  742. [ 3.710215] usbcore: registered new interface driver aiptek
  743. [ 3.710984] usbcore: registered new interface driver hanwang
  744. [ 3.711750] usbcore: registered new interface driver kbtab
  745. [ 3.715410] i2c_dev: i2c /dev entries driver
  746. [ 3.741567] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  747. [ 3.752541] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  748. [ 3.772253] rockchip-rga ff680000.rga: HW Version: 0x03.02
  749. [ 3.775313] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  750. [ 3.792646] dw_wdt ff848000.watchdog: No valid TOPs array specified
  751. [ 3.797497] device-mapper: uevent: version 1.0.3
  752. [ 3.799854] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
  753. [ 3.816887] sdhci: Secure Digital Host Controller Interface driver
  754. [ 3.817732] sdhci: Copyright(c) Pierre Ossman
  755. [ 3.818152] Synopsys Designware Multimedia Card Interface Driver
  756. [ 3.821762] sdhci-pltfm: SDHCI platform and OF driver helper
  757. [ 3.823841] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
  758. [ 3.824770] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
  759. [ 3.825417] dwmmc_rockchip fe310000.mmc: Version ID is 270a
  760. [ 3.825855] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
  761. [ 3.826401] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
  762. [ 3.827111] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
  763. [ 3.828365] dwmmc_rockchip fe320000.mmc: Version ID is 270a
  764. [ 3.829279] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
  765. [ 3.831109] dwmmc_rockchip fe320000.mmc: Got CD GPIO
  766. [ 3.833010] ledtrig-cpu: registered to indicate activity on CPUs
  767. [ 3.838367] hid: raw HID events driver (C) Jiri Kosina
  768. [ 3.840825] mmc2: CQHCI version 5.10
  769. [ 3.846884] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  770. [ 3.863036] usbcore: registered new interface driver usbhid
  771. [ 3.863827] usbhid: USB HID core driver
  772. [ 3.865755] rkvdec ff660000.video-codec: Adding to iommu group 1
  773. [ 3.877040] hantro-vpu ff650000.video-codec: Adding to iommu group 0
  774. [ 3.880934] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video2
  775. [ 3.882619] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
  776. [ 3.883009] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video3
  777. [ 3.887959] ashmem: initialized
  778. [ 3.906068] usbcore: registered new interface driver snd-usb-audio
  779. [ 3.934599] GACT probability NOT on
  780. [ 3.935038] netem: version 1.3
  781. [ 3.935348] u32 classifier
  782. [ 3.935689] input device check on
  783. [ 3.936045] Actions configured
  784. [ 3.942721] xt_time: kernel timezone is -0000
  785. [ 3.943768] gre: GRE over IPv4 demultiplexor driver
  786. [ 3.944237] IPv4 over IPsec tunneling driver
  787. [ 3.947059] Initializing XFRM netlink socket
  788. [ 3.947657] IPsec XFRM device driver
  789. [ 3.950704] NET: Registered PF_INET6 protocol family
  790. [ 3.959328] Segment Routing with IPv6
  791. [ 3.959876] In-situ OAM (IOAM) with IPv6
  792. [ 3.960707] mip6: Mobile IPv6
  793. [ 3.966294] NET: Registered PF_PACKET protocol family
  794. [ 3.966951] NET: Registered PF_KEY protocol family
  795. [ 3.967671] l2tp_core: L2TP core driver, V2.0
  796. [ 3.968135] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  797. [ 3.968657] 8021q: 802.1Q VLAN Support v1.8
  798. [ 3.979230] registered taskstats version 1
  799. [ 3.979747] Loading compiled-in X.509 certificates
  800. [ 3.989721] mmc2: Command Queue Engine enabled
  801. [ 3.990262] mmc2: new HS400 Enhanced strobe MMC card at address 0001
  802. [ 3.991592] Key type ._fscrypt registered
  803. [ 3.991998] Key type .fscrypt registered
  804. [ 3.992380] Key type fscrypt-provisioning registered
  805. [ 3.994030] Key type big_key registered
  806. [ 3.994330] mmcblk2: mmc2:0001 AJNB4R 14.6 GiB
  807. [ 3.996281] Key type encrypted registered
  808. [ 4.006821] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
  809. [ 4.018171] mmcblk2boot0: mmc2:0001 AJNB4R 4.00 MiB
  810. [ 4.024855] mmcblk2boot1: mmc2:0001 AJNB4R 4.00 MiB
  811. [ 4.031221] mmcblk2rpmb: mmc2:0001 AJNB4R 4.00 MiB, chardev (244:0)
  812. [ 4.465922] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
  813. [ 4.470570] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
  814. [ 4.472297] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  815. [ 4.477198] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
  816. [ 4.482691] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
  817. [ 4.485297] panfrost ff9a0000.gpu: clock rate = 500000000
  818. [ 4.494538] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
  819. [ 4.495310] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
  820. [ 4.496144] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830
  821. AS:0xff JS:0x7
  822. [ 4.497307] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
  823. [ 4.507863] [drm] Initialized panfrost 1.2.0 20180908 for ff9a0000.gpu on minor 1
  824. [ 4.521570] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  825. [ 4.522217] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1
  826. [ 4.523540] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  827. [ 4.524548] xhci-hcd xhci-hcd.2.auto: irq 72, io mem 0xfe800000
  828. [ 4.527517] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
  829. [ 4.528313] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  830. [ 4.529060] usb usb1: Product: xHCI Host Controller
  831. [ 4.529591] usb usb1: Manufacturer: Linux 5.17.0-android13-0-GloDroid-gcaea44ae4d05 xhci-hcd
  832. [ 4.530378] usb usb1: SerialNumber: xhci-hcd.2.auto
  833. [ 4.533711] hub 1-0:1.0: USB hub found
  834. [ 4.533872] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  835. [ 4.534253] hub 1-0:1.0: 1 port detected
  836. [ 4.536760] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  837. [ 4.536960] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
  838. [ 4.537323] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
  839. [ 4.538616] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  840. [ 4.538827] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
  841. [ 4.539841] xhci-hcd xhci-hcd.3.auto: irq 73, io mem 0xfe900000
  842. [ 4.540661] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  843. [ 4.542253] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
  844. [ 4.543113] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  845. [ 4.543859] usb usb3: Product: xHCI Host Controller
  846. [ 4.544339] usb usb3: Manufacturer: Linux 5.17.0-android13-0-GloDroid-gcaea44ae4d05 xhci-hcd
  847. [ 4.545175] usb usb3: SerialNumber: xhci-hcd.2.auto
  848. [ 4.549028] hub 3-0:1.0: USB hub found
  849. [ 4.549639] hub 3-0:1.0: 1 port detected
  850. [ 4.553017] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
  851. [ 4.553887] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  852. [ 4.554635] usb usb2: Product: xHCI Host Controller
  853. [ 4.555114] usb usb2: Manufacturer: Linux 5.17.0-android13-0-GloDroid-gcaea44ae4d05 xhci-hcd
  854. [ 4.555953] usb usb2: SerialNumber: xhci-hcd.3.auto
  855. [ 4.559029] hub 2-0:1.0: USB hub found
  856. [ 4.559633] hub 2-0:1.0: 1 port detected
  857. [ 4.561791] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  858. [ 4.562379] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
  859. [ 4.563204] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
  860. [ 4.564248] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  861. [ 4.565865] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
  862. [ 4.566710] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  863. [ 4.567399] usb usb4: Product: xHCI Host Controller
  864. [ 4.567936] usb usb4: Manufacturer: Linux 5.17.0-android13-0-GloDroid-gcaea44ae4d05 xhci-hcd
  865. [ 4.568779] usb usb4: SerialNumber: xhci-hcd.3.auto
  866. [ 4.572509] hub 4-0:1.0: USB hub found
  867. [ 4.573068] hub 4-0:1.0: 1 port detected
  868. [ 4.580261] ehci-platform fe380000.usb: EHCI Host Controller
  869. [ 4.580949] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
  870. [ 4.582339] ehci-platform fe380000.usb: irq 32, io mem 0xfe380000
  871. [ 4.589952] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  872. [ 4.592089] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
  873. [ 4.592948] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  874. [ 4.593695] usb usb5: Product: EHCI Host Controller
  875. [ 4.594173] usb usb5: Manufacturer: Linux 5.17.0-android13-0-GloDroid-gcaea44ae4d05 ehci_hcd
  876. [ 4.595012] usb usb5: SerialNumber: fe380000.usb
  877. [ 4.598538] hub 5-0:1.0: USB hub found
  878. [ 4.599093] hub 5-0:1.0: 1 port detected
  879. [ 4.605755] ehci-platform fe3c0000.usb: EHCI Host Controller
  880. [ 4.606371] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 6
  881. [ 4.607784] ehci-platform fe3c0000.usb: irq 34, io mem 0xfe3c0000
  882. [ 4.614955] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  883. [ 4.617072] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
  884. [ 4.617929] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  885. [ 4.618670] usb usb6: Product: EHCI Host Controller
  886. [ 4.619149] usb usb6: Manufacturer: Linux 5.17.0-android13-0-GloDroid-gcaea44ae4d05 ehci_hcd
  887. [ 4.619989] usb usb6: SerialNumber: fe3c0000.usb
  888. [ 4.623209] hub 6-0:1.0: USB hub found
  889. [ 4.623824] hub 6-0:1.0: 1 port detected
  890. [ 4.628297] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  891. [ 4.629053] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 7
  892. [ 4.630545] ohci-platform fe3a0000.usb: irq 33, io mem 0xfe3a0000
  893. [ 4.688003] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17
  894. [ 4.688884] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  895. [ 4.689633] usb usb7: Product: Generic Platform OHCI controller
  896. [ 4.690204] usb usb7: Manufacturer: Linux 5.17.0-android13-0-GloDroid-gcaea44ae4d05 ohci_hcd
  897. [ 4.691045] usb usb7: SerialNumber: fe3a0000.usb
  898. [ 4.694675] hub 7-0:1.0: USB hub found
  899. [ 4.695232] hub 7-0:1.0: 1 port detected
  900. [ 4.699765] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  901. [ 4.700597] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 8
  902. [ 4.701947] ohci-platform fe3e0000.usb: irq 35, io mem 0xfe3e0000
  903. [ 4.760008] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17
  904. [ 4.760890] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  905. [ 4.761638] usb usb8: Product: Generic Platform OHCI controller
  906. [ 4.762208] usb usb8: Manufacturer: Linux 5.17.0-android13-0-GloDroid-gcaea44ae4d05 ohci_hcd
  907. [ 4.763060] usb usb8: SerialNumber: fe3e0000.usb
  908. [ 4.766702] hub 8-0:1.0: USB hub found
  909. [ 4.767257] hub 8-0:1.0: 1 port detected
  910. [ 4.772875] rk808 0-001b: chip id: 0x0
  911. [ 4.798727] rk808-regulator rk808-regulator: there is no dvs0 gpio
  912. [ 4.799516] rk808-regulator rk808-regulator: there is no dvs1 gpio
  913. [ 4.821841] random: fast init done
  914. [ 4.840338] vcca3v0_codec: Bringing 1800000uV into 3000000-3000000uV
  915. [ 4.851293] vcc0v9_hdmi: Bringing 800000uV into 900000-900000uV
  916. [ 4.853927] dwhdmi-rockchip ff940000.hdmi: EVENT=plugin
  917. [ 4.854601] dwhdmi-rockchip ff940000.hdmi: read_hpd result: 1
  918. [ 4.869964] usb 6-1: new high-speed USB device number 2 using ehci-platform
  919. [ 4.878844] rk808-rtc rk808-rtc: registered as rtc0
  920. [ 4.881681] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:59 UTC (1358499059)
  921. [ 4.900301] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 200000 KHz, changing to: 408000 KHz
  922. [ 4.902266] cpu cpu0: EM: created perf domain
  923. [ 4.911191] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 12000 KHz, changing to: 408000 KHz
  924. [ 4.912278] cpu cpu4: EM: OPP:600000 is inefficient
  925. [ 4.912747] cpu cpu4: EM: OPP:408000 is inefficient
  926. [ 4.913916] cpu cpu4: EM: created perf domain
  927. [ 4.919140] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
  928. [ 4.919808] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
  929. [ 4.920393] dwmmc_rockchip fe310000.mmc: Version ID is 270a
  930. [ 4.920557] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
  931. [ 4.920919] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
  932. [ 4.921466] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
  933. [ 4.922504] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
  934. [ 4.922888] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  935. [ 4.923339] mmc_host mmc0: card is non-removable.
  936. [ 4.923962] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  937. [ 4.924897] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  938. [ 4.925393] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
  939. [ 4.925900] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  940. [ 4.926465] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  941. [ 4.927072] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  942. [ 4.932614] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  943. [ 4.933842] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  944. [ 4.934505] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  945. [ 4.934963] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
  946. [ 4.935622] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
  947. [ 4.936274] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  948. [ 4.936735] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  949. [ 4.937349] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  950. [ 4.937967] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  951. [ 4.938081] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  952. [ 4.938489] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  953. [ 4.938493] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  954. [ 5.001787] usb 6-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
  955. [ 5.002556] usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  956. [ 5.003184] usb 6-1: Product: USB2.0 Hub
  957. [ 5.004572] hub 6-1:1.0: USB hub found
  958. [ 5.005278] hub 6-1:1.0: 4 ports detected
  959. [ 5.010918] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  960. [ 5.011760] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  961. [ 5.015033] ALSA device list:
  962. [ 5.015301] No soundcards found.
  963. [ 5.015742] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
  964. [ 5.020237] Freeing unused kernel memory: 5376K
  965. [ 5.023623] Run /init as init process
  966. [ 5.023948] with arguments:
  967. [ 5.024210] /init
  968. [ 5.024411] earlyprintk
  969. [ 5.024669] with environment:
  970. [ 5.024946] HOME=/
  971. [ 5.025154] TERM=linux
  972. [ 5.025392] buildvariant=userdebug
  973. [ 5.041799] init: init first stage started!
  974. [ 5.042261] init: Unable to open /lib/modules, skipping module loading.
  975. [ 5.043083] init: Copied ramdisk prop to /second_stage_resources/system/etc/ramdisk/build.prop
  976. [ 5.043900] init: First stage mount skipped (recovery mode)
  977. [ 5.044776] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
  978. [ 5.045942] init: Using Android DT directory /proc/device-tree/firmware/android/
  979. [ 5.046636] init: Skipped setting INIT_AVB_VERSION (not vbmeta compatible)
  980. [ 5.049612] random: init: uninitialized urandom read (40 bytes read)
  981. [ 5.062128] random: init: uninitialized urandom read (40 bytes read)
  982. [ 5.062839] random: init: uninitialized urandom read (4 bytes read)
  983. [ 5.066707] init: Failed to open device-mapper: No such file or directory
  984. [ 5.066992] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  985. [ 5.067330] init: DM_DEV_STATUS failed for system_ext_a: Bad file descriptor
  986. [ 5.068824] init: Could not update logical partition
  987. [ 5.069462] init: DM_DEV_STATUS failed for product_a: Bad file descriptor
  988. [ 5.070061] init: Could not update logical partition
  989. [ 5.070527] init: Opening SELinux policy
  990. [ 5.071116] init: Falling back to standard signature check. TODO implementent support for fsverity SEPolicy.
  991. [ 5.072011] init: Error: Apex SEPolicy failed signature check
  992. [ 5.072530] init: Loading APEX Sepolicy from /system/etc/selinux/apex/SEPolicy.zip
  993. [ 5.073211] init: Failed to open package /system/etc/selinux/apex/SEPolicy.zip: No such file or directory
  994. [ 5.076094] init: Loading SELinux policy
  995. [ 5.088739] SELinux: Permission bpf in class capability2 not defined in policy.
  996. [ 5.089399] SELinux: Permission checkpoint_restore in class capability2 not defined in policy.
  997. [ 5.090175] SELinux: Permission bpf in class cap2_userns not defined in policy.
  998. [ 5.090824] SELinux: Permission checkpoint_restore in class cap2_userns not defined in policy.
  999. [ 5.091632] SELinux: Class mctp_socket not defined in policy.
  1000. [ 5.092144] SELinux: Class io_uring not defined in policy.
  1001. [ 5.092634] SELinux: the above unknown classes and permissions will be denied
  1002. [ 5.098853] SELinux: policy capability network_peer_controls=1
  1003. [ 5.099382] SELinux: policy capability open_perms=1
  1004. [ 5.099844] SELinux: policy capability extended_socket_class=1
  1005. [ 5.100361] SELinux: policy capability always_check_network=0
  1006. [ 5.100876] SELinux: policy capability cgroup_seclabel=0
  1007. [ 5.101347] SELinux: policy capability nnp_nosuid_transition=1
  1008. [ 5.101867] SELinux: policy capability genfs_seclabel_symlinks=0
  1009. [ 5.236547] audit: type=1403 audit(1358499059.854:2): auid=4294967295 ses=4294967295 lsm=selinux res=1
  1010. [ 5.238738] selinux: SELinux: Loaded file_contexts
  1011. [ 5.239173] selinux:
  1012. [ 5.260671] init: init second stage started!
  1013. [ 5.266409] init: Could not read properties from '/dev/selinux/apex_property_contexts': No such file or directory
  1014. [ 5.289680] init: Using Android DT directory /proc/device-tree/firmware/android/
  1015. [ 5.293666] init: Couldn't load property file '/system/build.prop': open() failed: No such file or directory: No such
  1016. file or directory
  1017. [ 5.294769] init: Couldn't load property file '/system_ext/etc/build.prop': open() failed: No such file or directory:
  1018. No such file or directory
  1019. [ 5.295918] init: Couldn't load property file '/system_ext/default.prop': open() failed: No such file or directory: N
  1020. o such file or directory
  1021. [ 5.297050] init: Couldn't load property file '/system_ext/build.prop': open() failed: No such file or directory: No
  1022. such file or directory
  1023. [ 5.298170] init: Couldn't load property file '/system_ext/default.prop': open() failed: No such file or directory: N
  1024. o such file or directory
  1025. [ 5.299299] init: Couldn't load property file '/system_ext/build.prop': open() failed: No such file or directory: No
  1026. such file or directory
  1027. [ 5.300442] init: Couldn't load property file '/system_dlkm/etc/build.prop': open() failed: No such file or directory
  1028. : No such file or directory
  1029. [ 5.301623] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No su
  1030. ch file or directory
  1031. [ 5.302724] init: Couldn't load property file '/vendor/build.prop': open() failed: No such file or directory: No such
  1032. file or directory
  1033. [ 5.303816] init: Couldn't load property file '/vendor_dlkm/etc/build.prop': open() failed: No such file or directory
  1034. : No such file or directory
  1035. [ 5.304975] init: Couldn't load property file '/odm_dlkm/etc/build.prop': open() failed: No such file or directory: N
  1036. o such file or directory
  1037. [ 5.306110] init: Couldn't load property file '/odm/etc/build.prop': open() failed: No such file or directory: No suc
  1038. h file or directory
  1039. [ 5.307202] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such
  1040. file or directory
  1041. [ 5.308279] init: Couldn't load property file '/odm/build.prop': open() failed: No such file or directory: No such fi
  1042. le or directory
  1043. [ 5.309340] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such
  1044. file or directory
  1045. [ 5.310418] init: Couldn't load property file '/odm/build.prop': open() failed: No such file or directory: No such fi
  1046. le or directory
  1047. [ 5.311482] init: Couldn't load property file '/product/etc/build.prop': open() failed: No such file or directory: No
  1048. such file or directory
  1049. [ 5.312603] init: Couldn't load property file '/product/default.prop': open() failed: No such file or directory: No s
  1050. uch file or directory
  1051. [ 5.313712] init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No suc
  1052. h file or directory
  1053. [ 5.314808] init: Couldn't load property file '/product/default.prop': open() failed: No such file or directory: No s
  1054. uch file or directory
  1055. [ 5.315915] init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No suc
  1056. h file or directory
  1057. [ 5.317998] init: Setting product property ro.product.brand to 'Pine64' (from ro.product.product.brand)
  1058. [ 5.318872] init: Setting product property ro.product.device to 'pinephonepro' (from ro.product.product.device)
  1059. [ 5.319779] init: Setting product property ro.product.manufacturer to 'Pine64' (from ro.product.product.manufacturer)
  1060. [ 5.320728] init: Setting product property ro.product.model to 'PinePhonePro' (from ro.product.product.model)
  1061. [ 5.321618] init: Setting product property ro.product.name to 'pinephonepro' (from ro.product.product.name)
  1062. [ 5.322507] init: Setting property 'ro.build.fingerprint' to 'Pine64/pinephonepro/pinephonepro:Tiramisu/AOSP.MASTER/e
  1063. ng.andy.20220427.100323:userdebug/test-keys'
  1064. [ 5.323797] init: Setting property 'ro.product.cpu.abilist' to 'arm64-v8a,armeabi-v7a,armeabi'
  1065. [ 5.324567] init: Setting property 'ro.product.cpu.abilist32' to 'armeabi-v7a,armeabi'
  1066. [ 5.325273] init: Setting property 'ro.product.cpu.abilist64' to 'arm64-v8a'
  1067. [ 5.327935] selinux: SELinux: Loaded file_contexts
  1068. [ 5.328367] selinux:
  1069. [ 5.328616] init: Running restorecon...
  1070. [ 5.334330] selinux: SELinux: Could not stat /dev/block: No such file or directory.
  1071. [ 5.335086] selinux:
  1072. [ 5.336565] selinux: SELinux: Could not get canonical path for /metadata/ota/rollback-indicator restorecon: No such f
  1073. ile or directory.
  1074. [ 5.337629] selinux:
  1075. [ 5.337881] selinux: SELinux: Could not stat /metadata/gsi: No such file or directory.
  1076. [ 5.338587] selinux:
  1077. [ 5.339373] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
  1078. [ 5.344701] init: SetupMountNamespaces done
  1079. [ 5.346483] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 230
  1080. [ 5.347240] init: Parsing file /system/etc/init/hw/init.rc...
  1081. [ 5.347849] init: Added '/init.recovery.pinephonepro.rc' to import list
  1082. [ 5.349055] init: Parsing file /init.recovery.pinephonepro.rc...
  1083. [ 5.349683] init: Parsing directory /system/etc/init...
  1084. [ 5.350192] init: Parsing file /system/etc/init/android.hardware.health-service.example_recovery.rc...
  1085. [ 5.351062] audit: type=1400 audit(1358499059.968:3): avc: denied { read } for pid=230 comm="init" name="bin" dev=
  1086. "rootfs" ino=168 scontext=u:r:vendor_init:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
  1087. [ 5.351077] init: Parsing file /system/etc/init/servicemanager.recovery.rc...
  1088. [ 5.353433] init: Parsing file /system_ext/etc/init...
  1089. [ 5.353908] init: Unable to read config file '/system_ext/etc/init': open() failed: No such file or directory
  1090. [ 5.354794] init: Parsing file /vendor/etc/init...
  1091. [ 5.355234] init: Unable to read config file '/vendor/etc/init': open() failed: No such file or directory
  1092. [ 5.356098] init: Parsing file /odm/etc/init...
  1093. [ 5.356524] init: Unable to read config file '/odm/etc/init': open() failed: No such file or directory
  1094. [ 5.357351] init: Parsing file /product/etc/init...
  1095. [ 5.357804] init: Unable to read config file '/product/etc/init': open() failed: No such file or directory
  1096. [ 5.359635] init: processing action (SetupCgroups) from (<Builtin Action>:0)
  1097. [ 5.362645] init: processing action (SetKptrRestrict) from (<Builtin Action>:0)
  1098. [ 5.363600] init: processing action (TestPerfEventSelinux) from (<Builtin Action>:0)
  1099. [ 5.364318] init: Permissive SELinux boot, forcing sys.init.perf_lsm_hooks to 1.
  1100. [ 5.365519] init: processing action (ConnectEarlyStageSnapuserd) from (<Builtin Action>:0)
  1101. [ 5.366286] init: processing action (early-init) from (/system/etc/init/hw/init.rc:3)
  1102. [ 5.367873] init: starting service 'ueventd'...
  1103. [ 5.370027] init: cpuset cgroup controller is not mounted!
  1104. [ 5.373631] init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
  1105. [ 5.388143] audit: type=1400 audit(1358499060.005:4): avc: denied { sys_nice } for pid=231 comm="ueventd" capabili
  1106. ty=23 scontext=u:r:ueventd:s0 tcontext=u:r:ueventd:s0 tclass=capability permissive=1
  1107. [ 5.388343] ueventd: ueventd started!
  1108. [ 5.392068] selinux: SELinux: Loaded file_contexts
  1109. [ 5.392512] selinux:
  1110. [ 5.392930] ueventd: Parsing file /system/etc/ueventd.rc...
  1111. [ 5.393490] ueventd: Added '/vendor/etc/ueventd.rc' to import list
  1112. [ 5.394042] ueventd: Added '/odm/etc/ueventd.rc' to import list
  1113. [ 5.394868] ueventd: Parsing file /vendor/etc/ueventd.rc...
  1114. [ 5.395380] ueventd: Unable to read config file '/vendor/etc/ueventd.rc': open() failed: No such file or directory
  1115. [ 5.396310] ueventd: Parsing file /odm/etc/ueventd.rc...
  1116. [ 5.396805] ueventd: Unable to read config file '/odm/etc/ueventd.rc': open() failed: No such file or directory
  1117. [ 5.397705] ueventd: Parsing file /vendor/ueventd.rc...
  1118. [ 5.398183] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
  1119. [ 5.399075] ueventd: Parsing file /odm/ueventd.rc...
  1120. [ 5.399535] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
  1121. [ 5.400400] ueventd: Parsing file /ueventd.pinephonepro.rc...
  1122. [ 5.400930] ueventd: Unable to read config file '/ueventd.pinephonepro.rc': open() failed: No such file or directory
  1123. [ 5.651119] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 49
  1124. [ 5.655562] mmc0: new ultra high speed SDR104 SDIO card at address 0001
  1125. [ 5.656458] audit: type=1400 audit(1358499060.273:5): avc: denied { search } for pid=222 comm="kworker/3:2" name="
  1126. mmc0" dev="debugfs" ino=12363 scontext=u:r:kernel:s0 tcontext=u:object_r:debugfs_mmc:s0 tclass=dir permissive=1
  1127. [ 5.681262] init: Wait for property 'ro.cold_boot_done=true' took 306ms
  1128. [ 5.682024] init: processing action (SetMmapRndBits) from (<Builtin Action>:0)
  1129. [ 5.682028] ueventd: Coldboot took 0.279 seconds
  1130. [ 5.683567] init: processing action (KeychordInit) from (<Builtin Action>:0)
  1131. [ 5.684245] init: processing action (init) from (/system/etc/init/hw/init.rc:15)
  1132. [ 5.688387] init: Command 'symlink /system/bin /bin' action=init (/system/etc/init/hw/init.rc:24) took 0ms and failed
  1133. : symlink() failed: File exists
  1134. [ 5.689887] init: Command 'symlink /system/etc /etc' action=init (/system/etc/init/hw/init.rc:25) took 0ms and failed
  1135. : symlink() failed: File exists
  1136. [ 5.696100] init: starting service 'servicemanager'...
  1137. [ 5.698178] init: cpuset cgroup controller is not mounted!
  1138. [ 5.700018] init: processing action (init) from (/init.recovery.pinephonepro.rc:1)
  1139. [ 5.701018] init: processing action (late-init) from (/system/etc/init/hw/init.rc:64)
  1140. [ 5.701891] init: processing action (queue_property_triggers) from (<Builtin Action>:0)
  1141. [ 5.702663] init: processing action (sys.usb.configfs=1 && fs) from (/system/etc/init/hw/init.rc:102)
  1142. [ 5.709838] file system registered
  1143. [ 5.711946] init: processing action (fs) from (/system/etc/init/hw/init.rc:122)
  1144. [ 5.715526] init: processing action (firmware_mounts_complete) from (/system/etc/init/hw/init.rc:60)
  1145. [ 5.716417] init: processing action (boot) from (/system/etc/init/hw/init.rc:52)
  1146. [ 5.718792] init: Could not start service 'charger' as part of class 'default': Cannot find '/system/bin/charger': No
  1147. such file or directory
  1148. [ 5.719932] init: starting service 'recovery'...
  1149. [ 5.720793] init: Created socket '/dev/socket/recovery', mode 422, user 1000, group 1000
  1150. [ 5.722591] SELinux: SELinux: Loaded service_contexts from:
  1151. [ 5.723107] SELinux:
  1152. [ 5.723134] init: cpuset cgroup controller is not mounted!
  1153. [ 5.723389] SELinux: /plat_service_contexts
  1154. [ 5.724253] SELinux:
  1155. [ 5.724530] SELinux: /system_ext_service_contexts
  1156. [ 5.724976] SELinux:
  1157. [ 5.725203] SELinux: /product_service_contexts
  1158. [ 5.725658] SELinux:
  1159. [ 5.725886] SELinux: /vendor_service_contexts
  1160. [ 5.726301] SELinux:
  1161. [ 5.727238] init: starting service 'vendor.health-default'...
  1162. [ 5.729450] init: cpuset cgroup controller is not mounted!
  1163. [ 5.732070] init: processing action (enable_property_trigger) from (<Builtin Action>:0)
  1164. [ 5.732883] init: processing action (ro.debuggable=1) from (/init.recovery.pinephonepro.rc:13)
  1165. [ 5.733812] init: starting service 'console'...
  1166. [ 5.735916] init: cpuset cgroup controller is not mounted!
  1167. # [ 5.750187] healthd: No battery devices found
  1168. [ 5.750893] android.hardware.health-service.example_recovery: Starting health HAL.
  1169. [ 5.751644] android.hardware.health-service.example_recovery: default instance initializing with healthd_config...
  1170. [ 5.753894] servicemanager: getRecoveryHalManifest: Reading VINTF information.
  1171. [ 5.754942] servicemanager: getRecoveryHalManifest: Successfully processed VINTF information
  1172. [ 5.755735] servicemanager: Found android.hardware.health.IHealth/default in recovery VINTF manifest.
  1173. [ 5.756691] android.hardware.health-service.example_recovery: default: Hal init done
  1174. [ 5.757997] healthd: battery none chg=
  1175. [ 5.767092] audit: type=1400 audit(1358499060.384:6): avc: denied { search } for pid=240 comm="recovery" name="dri
  1176. " dev="tmpfs" ino=275 scontext=u:r:recovery:s0 tcontext=u:object_r:dri_device:s0 tclass=dir permissive=1
  1177. [ 5.768867] audit: type=1400 audit(1358499060.384:7): avc: denied { read write } for pid=240 comm="recovery" name=
  1178. "card0" dev="tmpfs" ino=276 scontext=u:r:recovery:s0 tcontext=u:object_r:gpu_device:s0 tclass=chr_file permissive=1
  1179. [ 5.770684] audit: type=1400 audit(1358499060.384:8): avc: denied { open } for pid=240 comm="recovery" path="/dev/
  1180. dri/card0" dev="tmpfs" ino=276 scontext=u:r:recovery:s0 tcontext=u:object_r:gpu_device:s0 tclass=chr_file permissive=1
  1181. [ 5.772511] audit: type=1400 audit(1358499060.384:9): avc: denied { ioctl } for pid=240 comm="recovery" path="/dev
  1182. /dri/card0" dev="tmpfs" ino=276 ioctlcmd=0x640c scontext=u:r:recovery:s0 tcontext=u:object_r:gpu_device:s0 tclass=chr_fi
  1183. le permissive=1
  1184. [ 5.914161] audit: type=1400 audit(1358499060.531:10): avc: denied { map } for pid=240 comm="recovery" path="/dev/
  1185. dri/card0" dev="tmpfs" ino=276 scontext=u:r:recovery:s0 tcontext=u:object_r:gpu_device:s0 tclass=chr_file permissive=1
  1186. [ 6.107004] init: processing action (sys.usb.config=none && sys.usb.configfs=1) from (/system/etc/init/hw/init.rc:160
  1187. )
  1188. [ 6.108849] init: Command 'write /config/usb_gadget/g1/UDC none' action=sys.usb.config=none && sys.usb.configfs=1 (/s
  1189. ystem/etc/init/hw/init.rc:161) took 0ms and failed: Unable to write to file '/config/usb_gadget/g1/UDC': Unable to write
  1190. file contents: No such device
  1191. [ 6.112098] init: Command 'rm /config/usb_gadget/g1/configs/b.1/f1' action=sys.usb.config=none && sys.usb.configfs=1
  1192. (/system/etc/init/hw/init.rc:165) took 0ms and failed: unlink() failed: No such file or directory
  1193. [ 6.114152] init: processing action (sys.usb.config=fastboot) from (/system/etc/init/hw/init.rc:132)
  1194. [ 6.115014] init: starting service 'fastbootd'...
  1195. [ 6.117039] init: cpuset cgroup controller is not mounted!
  1196. [ 6.147644] servicemanager: Found android.hardware.health.IHealth/default in recovery VINTF manifest.
  1197. [ 6.149706] cutils-trace: Error opening trace file: No such file or directory (2)
  1198. [ 6.150759] fastbootd: initializing functionfs
  1199. [ 6.151161] fastbootd: opening control endpoint /dev/usb-ffs/fastboot/ep0
  1200. [ 6.151810] read descriptors
  1201. [ 6.152068] read strings
  1202. [ 6.153302] init: processing action (sys.usb.config=fastboot && sys.usb.configfs=1 && sys.usb.ffs.ready=1) from (/sys
  1203. tem/etc/init/hw/init.rc:182)
  1204. [ 6.153856] fastbootd: [libfs_mgr]unknown volume for path [/cache]
  1205. [ 6.158193] init: Command 'write /config/usb_gadget/g1/UDC ${sys.usb.controller}' action=sys.usb.config=fastboot && s
  1206. ys.usb.configfs=1 && sys.usb.ffs.ready=1 (/system/etc/init/hw/init.rc:186) took 0ms and failed: property 'sys.usb.contro
  1207. ller' doesn't exist while expanding '${sys.usb.controller}'
  1208.  
  1209. # ls /sys/class/u
  1210. udc/ usb_role/
  1211. # ls /sys/class/udc/
  1212. # [ 47.866571] random: crng init done
  1213. [ 47.866879] random: 7 urandom warning(s) missed due to ratelimiting
  1214.  
  1215. CTRL-A Z for help | 1500000 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB1
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!