S.M.A.R.T

[root@fedora ~]# smartctl -d usbcypress -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.38.8-35.fc15.x86_64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda ATA II
Device Model:     ST330630A
Serial Number:    3CK08QL2
Firmware Version: 3.21
User Capacity:    30.606.151.680 bytes [30,6 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   4
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Jul 31 11:08:04 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		( 2222) seconds.
Offline data collection
capabilities: 			 (0x1b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  27) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000e   066   050   025    Old_age   Always       -       19260557
  3 Spin_Up_Time            0x0002   074   070   000    Old_age   Always       -       0
  4 Start_Stop_Count        0x0033   100   100   020    Pre-fail  Always       -       142
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   048   039   030    Pre-fail  Always       -       4050214509846
  9 Power_On_Hours          0x0032   088   088   000    Old_age   Always       -       10615
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0033   099   099   020    Pre-fail  Always       -       1754
194 Temperature_Celsius     0x0022   042   071   000    Old_age   Always       -       45
195 Hardware_ECC_Recovered  0x001a   076   051   000    Old_age   Always       -       184300963
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   095   092   000    Old_age   Offline      -       5506215313408
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     10615         -
# 2  Short offline       Completed without error       00%     10615         -

Device does not support Selective Self Tests/Logging