API tools faq
paste
Guest User

Untitled

a guest
Jan 17th, 2019
179
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.89 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. [ 0.000000] Linux version 5.0.0-rc2-00295-g121d096f076a (afenkart@muskel) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05)) #64 SMP PREEMPT Wed Jan 16 17:07:31 CET 2019
  3. [ 0.000000] Machine model: Amlogic Meson GXL (S905X) P212 Development Board
  4. [ 0.000000] earlycon: meson0 at MMIO 0x00000000c81004c0 (options '')
  5. [ 0.000000] printk: bootconsole [meson0] enabled
  6. [ 0.000000] efi: Getting EFI parameters from FDT:
  7. [ 0.000000] efi: UEFI not found.
  8. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000068000000, size 256 MiB
  9. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  10. [ 0.000000] NUMA: No NUMA configuration found
  11. [ 0.000000] NUMA: Faking a node at [mem 0x0000000001000000-0x0000000077ffffff]
  12. [ 0.000000] NUMA: NODE_DATA [mem 0x67c21840-0x67c22fff]
  13. [ 0.000000] Zone ranges:
  14. [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000077ffffff]
  15. [ 0.000000] Normal empty
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
  19. [ 0.000000] node 0: [mem 0x0000000005300000-0x000000000fffffff]
  20. [ 0.000000] node 0: [mem 0x0000000010200000-0x0000000077ffffff]
  21. [ 0.000000] Initmem setup node 0 [mem 0x0000000001000000-0x0000000077ffffff]
  22. [ 0.000000] On node 0 totalpages: 486144
  23. [ 0.000000] DMA32 zone: 7616 pages used for memmap
  24. [ 0.000000] DMA32 zone: 0 pages reserved
  25. [ 0.000000] DMA32 zone: 486144 pages, LIFO batch:63
  26. [ 0.000000] psci: probing for conduit method from DT.
  27. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  28. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  29. [ 0.000000] psci: Trusted OS migration not required
  30. [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x408 with crng_init=0
  31. [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s53912 r8192 d32104 u94208
  32. [ 0.000000] pcpu-alloc: s53912 r8192 d32104 u94208 alloc=23*4096
  33. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  34. [ 0.000000] Detected VIPT I-cache on CPU0
  35. [ 0.000000] CPU features: detected: ARM erratum 845719
  36. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 478528
  37. [ 0.000000] Policy zone: DMA32
  38. [ 0.000000] Kernel command line: root=/dev/nfs ip=dhcp nfsroot=192.168.11.237:/var/exports/dssip,vers=3 debug nfsrootdebug console=ttyAML0,115200 no_console_suspend earlyprintk=meson,0xc81004c0 earlycon=meson,0xc81004c0 maxcpus=4 jtag=apee
  39. [ 0.000000] Memory: 1631404K/1944576K available (7548K kernel code, 602K rwdata, 2684K rodata, 704K init, 339K bss, 51028K reserved, 262144K cma-reserved)
  40. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  41. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  42. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  43. [ 0.000000] Tasks RCU enabled.
  44. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  45. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  46. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  47. [ 0.000000] GIC: Using split EOI/Deactivate mode
  48. [ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
  49. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  50. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  51. [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  52. [ 0.008420] Console: colour dummy device 80x25
  53. [ 0.012585] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  54. [ 0.022845] pid_max: default: 32768 minimum: 301
  55. [ 0.027539] LSM: Security Framework initializing
  56. [ 0.032844] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  57. [ 0.039651] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  58. [ 0.046408] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  59. [ 0.053130] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  60. [ 0.084381] ASID allocator initialised with 32768 entries
  61. [ 0.092367] rcu: Hierarchical SRCU implementation.
  62. [ 0.101092] EFI services will not be available.
  63. [ 0.108405] smp: Bringing up secondary CPUs ...
  64. [ 0.140619] Detected VIPT I-cache on CPU1
  65. [ 0.140665] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  66. [ 0.172659] Detected VIPT I-cache on CPU2
  67. [ 0.172697] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  68. [ 0.204705] Detected VIPT I-cache on CPU3
  69. [ 0.204741] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  70. [ 0.204809] smp: Brought up 1 node, 4 CPUs
  71. [ 0.235029] SMP: Total of 4 processors activated.
  72. [ 0.239749] CPU features: detected: 32-bit EL0 Support
  73. [ 0.244922] CPU features: detected: CRC32 instructions
  74. [ 0.250279] CPU: All CPU(s) started at EL2
  75. [ 0.254203] alternatives: patching kernel code
  76. [ 0.259341] devtmpfs: initialized
  77. [ 0.266158] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  78. [ 0.271801] futex hash table entries: 1024 (order: 4, 65536 bytes)
  79. [ 0.285074] pinctrl core: initialized pinctrl subsystem
  80. [ 0.285858] DMI not present or invalid.
  81. [ 0.288814] NET: Registered protocol family 16
  82. [ 0.293346] audit: initializing netlink subsys (disabled)
  83. [ 0.298519] audit: type=2000 audit(0.260:1): state=initialized audit_enabled=0 res=1
  84. [ 0.306222] cpuidle: using governor menu
  85. [ 0.310417] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  86. [ 0.317584] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  87. [ 0.325396] DMA: preallocated 256 KiB pool for atomic allocations
  88. [ 0.331157] Serial: AMBA PL011 UART driver
  89. [ 0.348325] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  90. [ 0.349391] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  91. [ 0.356152] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  92. [ 0.362869] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  93. [ 0.370096] cryptd: max_cpu_qlen set to 1000
  94. [ 0.375321] ACPI: Interpreter disabled.
  95. [ 0.379640] SCSI subsystem initialized
  96. [ 0.381800] usbcore: registered new interface driver usbfs
  97. [ 0.387094] usbcore: registered new interface driver hub
  98. [ 0.392522] usbcore: registered new device driver usb
  99. [ 0.397728] pps_core: LinuxPPS API ver. 1 registered
  100. [ 0.402427] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  101. [ 0.411635] PTP clock support registered
  102. [ 0.415791] EDAC MC: Ver: 3.0.0
  103. [ 0.420113] clocksource: Switched to clocksource arch_sys_counter
  104. [ 0.425191] pnp: PnP ACPI: disabled
  105. [ 0.434560] NET: Registered protocol family 2
  106. [ 0.434974] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
  107. [ 0.441270] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  108. [ 0.448541] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  109. [ 0.455249] TCP: Hash tables configured (established 16384 bind 16384)
  110. [ 0.461746] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  111. [ 0.467703] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  112. [ 0.474285] NET: Registered protocol family 1
  113. [ 0.478845] RPC: Registered named UNIX socket transport module.
  114. [ 0.484465] RPC: Registered udp transport module.
  115. [ 0.489188] RPC: Registered tcp transport module.
  116. [ 0.493912] RPC: Registered tcp NFSv4.1 backchannel transport module.
  117. [ 0.501136] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  118. [ 0.513645] Initialise system trusted keyrings
  119. [ 0.513791] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  120. [ 0.525600] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  121. [ 0.526464] NFS: Registering the id_resolver key type
  122. [ 0.530903] Key type id_resolver registered
  123. [ 0.535068] Key type id_legacy registered
  124. [ 0.539105] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  125. [ 0.550287] Key type asymmetric registered
  126. [ 0.550312] Asymmetric key parser 'x509' registered
  127. [ 0.554925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  128. [ 0.562288] io scheduler mq-deadline registered
  129. [ 0.566830] io scheduler kyber registered
  130. [ 0.574860] EINJ: ACPI disabled.
  131. [ 0.583538] meson_vid_pll_div_recalc_rate: Invalid config value for vid_pll_div
  132. [ 0.588018] soc soc0: Amlogic Meson GXL (S905X) Revision 21:a (82:2) Detected
  133. [ 0.596227] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  134. [ 0.600807] c11084c0.serial: ttyAML1 at MMIO 0xc11084c0 (irq = 10, base_baud = 1500000) is a meson_uart
  135. [ 0.608733] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 13, base_baud = 1500000) is a meson_uart
  136. [ 0.618152] printk: console [ttyAML0] enabled
  137. [ 0.621200] printk: bootconsole [meson0] disabled
  138. [ 0.639103] loop: module loaded
  139. [ 0.640407] libphy: Fixed MDIO Bus: probed
  140. [ 0.640697] tun: Universal TUN/TAP device driver, 1.6
  141. [ 0.646283] meson8b-dwmac c9410000.ethernet: PTP uses main clock
  142. [ 0.651658] meson8b-dwmac c9410000.ethernet: no reset control found
  143. [ 0.658223] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
  144. [ 0.664931] meson8b-dwmac c9410000.ethernet: DWMAC1000
  145. [ 0.670094] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
  146. [ 0.677507] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
  147. [ 0.684925] meson8b-dwmac c9410000.ethernet: COE Type 2
  148. [ 0.690099] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
  149. [ 0.697085] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
  150. [ 0.703495] meson8b-dwmac c9410000.ethernet: Normal descriptors
  151. [ 0.709333] meson8b-dwmac c9410000.ethernet: Ring mode enabled
  152. [ 0.715113] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  153. [ 0.723176] libphy: stmmac: probed
  154. [ 0.727103] VFIO - User Level meta-driver version: 0.3
  155. [ 0.732396] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2
  156. [ 0.738435] usbcore: registered new interface driver usb-storage
  157. [ 0.743732] i2c /dev entries driver
  158. [ 0.748946] sdhci: Secure Digital Host Controller Interface driver
  159. [ 0.752552] sdhci: Copyright(c) Pierre Ossman
  160. [ 0.757139] Synopsys Designware Multimedia Card Interface Driver
  161. [ 0.763784] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
  162. [ 0.769672] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.1
  163. [ 0.776532] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.1
  164. [ 0.783031] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
  165. [ 0.789910] meson-gx-mmc d0072000.mmc: Linked as a consumer to regulator.2
  166. [ 0.796458] meson-gx-mmc d0072000.mmc: Linked as a consumer to regulator.1
  167. [ 0.803233] meson-gx-mmc d0072000.mmc: Got CD GPIO
  168. [ 0.835089] meson-gx-mmc d0074000.mmc: Linked as a consumer to regulator.4
  169. [ 0.836457] meson-gx-mmc d0074000.mmc: Linked as a consumer to regulator.1
  170. [ 0.843228] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
  171. [ 0.875804] sdhci-pltfm: SDHCI platform and OF driver helper
  172. [ 0.876808] ledtrig-cpu: registered to indicate activity on CPUs
  173. [ 0.882306] meson-sm: secure-monitor enabled
  174. [ 0.887030] usbcore: registered new interface driver usbhid
  175. [ 0.891577] usbhid: USB HID core driver
  176. [ 0.895731] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
  177. [ 0.903093] meson-saradc c1108680.adc: Linked as a consumer to regulator.3
  178. [ 0.911008] NET: Registered protocol family 17
  179. [ 0.913430] Key type dns_resolver registered
  180. [ 0.918248] registered taskstats version 1
  181. [ 0.921644] Loading compiled-in X.509 certificates
  182. [ 0.935992] phy phy-d0078000.phy.0: Linked as a consumer to regulator.5
  183. [ 0.938516] libphy: mdio_mux: probed
  184. [ 0.941022] libphy: mdio_mux: probed
  185. [ 0.946410] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  186. [ 0.949502] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  187. [ 0.957713] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
  188. [ 0.966439] xhci-hcd xhci-hcd.0.auto: irq 35, io mem 0xc9000000
  189. [ 0.969115] mmc1: new HS200 MMC card at address 0001
  190. [ 0.973439] hub 1-0:1.0: USB hub found
  191. [ 0.978183] mmcblk1: mmc1:0001 NCard 7.22 GiB
  192. [ 0.980931] hub 1-0:1.0: 2 ports detected
  193. [ 0.986057] mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB
  194. [ 0.989725] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  195. [ 0.995959] mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB
  196. [ 1.000633] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  197. [ 1.006715] mmcblk1rpmb: mmc1:0001 NCard partition 3 4.00 MiB, chardev (243:0)
  198. [ 1.014090] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  199. [ 1.027385] found partition table
  200. [ 1.027954] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  201. [ 1.031157] [mmcblk1p1] bootloader: offset:0x000000000 size:0x000400000 mask_flags:0x0000
  202. [ 1.031163] [mmcblk1p2] reserved: offset:0x002400000 size:0x004000000 mask_flags:0x0000
  203. [ 1.039869] hub 2-0:1.0: USB hub found
  204. [ 1.047627] [mmcblk1p3] cache: offset:0x006c00000 size:0x020000000 mask_flags:0x0002
  205. [ 1.047631] [mmcblk1p4] env: offset:0x027400000 size:0x000800000 mask_flags:0x0000
  206. [ 1.047637] [mmcblk1p5] logo: offset:0x028400000 size:0x002000000 mask_flags:0x0001
  207. [ 1.056125] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  208. [ 1.059784] [mmcblk1p6] recovery: offset:0x02ac00000 size:0x002000000 mask_flags:0x0001
  209. [ 1.059787] [mmcblk1p7] rsv: offset:0x02d400000 size:0x000800000 mask_flags:0x0001
  210. [ 1.069483] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
  211. [ 1.076693] [mmcblk1p8] tee: offset:0x02e400000 size:0x000800000 mask_flags:0x0001
  212. [ 1.076696] [mmcblk1p9] crypt: offset:0x02f400000 size:0x002000000 mask_flags:0x0001
  213. [ 1.076701] [mmcblk1p10] misc: offset:0x031c00000 size:0x002000000 mask_flags:0x0001
  214. [ 1.076708] [mmcblk1p11] instaboot: offset:0x034400000 size:0x020000000 mask_flags:0x0001
  215. [ 1.085192] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.1
  216. [ 1.092214] [mmcblk1p12] boot: offset:0x054c00000 size:0x002000000 mask_flags:0x0001
  217. [ 1.092217] [mmcblk1p13] system: offset:0x057400000 size:0x040000000 mask_flags:0x0001
  218. [ 1.092221] [mmcblk1p14] data: offset:0x097c00000 size:0x136500000 mask_flags:0x0004
  219. [ 1.092233] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
  220. [ 1.100795] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.1
  221. [ 1.194816] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
  222. [ 1.201851] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
  223. [ 1.212423] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
  224. [ 1.214473] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.1
  225. [ 1.221353] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.1
  226. [ 1.227836] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
  227. [ 1.235199] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
  228. [ 1.241331] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.1
  229. [ 1.248069] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.1
  230. [ 1.254572] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
  231. [ 1.261406] hctosys: unable to open rtc device (rtc0)
  232. [ 1.269282] Meson GXL Internal PHY 0.e40908ff:08: attached PHY driver [Meson GXL Internal PHY] (mii_bus:phy_addr=0.e40908ff:08, irq=36)
  233. [ 1.288128] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
  234. [ 1.290045] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
  235. [ 1.336128] usb 1-2: new high-speed USB device number 2 using xhci-hcd
  236. [ 1.500831] usb-storage 1-2:1.0: USB Mass Storage device detected
  237. [ 1.501823] scsi host0: usb-storage 1-2:1.0
  238. [ 1.506657] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
  239. [ 1.512286] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.1
  240. [ 1.519134] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.1
  241. [ 1.525636] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
  242. [ 2.510171] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6
  243. [ 2.514001] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2
  244. [ 2.519480] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.1
  245. [ 2.526472] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.1
  246. [ 2.527211] sd 0:0:0:0: [sda] 30218842 512-byte logical blocks: (15.5 GB/14.4 GiB)
  247. [ 2.532861] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.2
  248. [ 2.541277] sd 0:0:0:0: [sda] Write Protect is off
  249. [ 2.551593] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
  250. [ 2.557515] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  251. [ 2.569801] sda: sda1
  252. [ 2.576609] sd 0:0:0:0: [sda] Attached SCSI removable disk
  253. [ 2.748596] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  254. [ 2.776116] Sending DHCP requests .., OK
  255. [ 5.924165] IP-Config: Got DHCP answer from 192.168.11.1, my address is 192.168.11.206
  256. [ 5.930277] IP-Config: Complete:
  257. [ 5.933465] device=eth0, hwaddr=00:15:18:01:81:31, ipaddr=192.168.11.206, mask=255.255.255.0, gw=192.168.11.1
  258. [ 5.943723] host=192.168.11.206, domain=lan, nis-domain=(none)
  259. [ 5.949933] bootserver=192.168.11.1, rootserver=192.168.11.237, rootpath=
  260. [ 5.949935] nameserver0=192.168.11.1
  261. [ 5.961322] VDDAO_3V3: disabling
  262. [ 5.984515] VFS: Mounted root (nfs filesystem) readonly on device 0:18.
  263. [ 5.986644] devtmpfs: mounted
  264. [ 5.988638] Freeing unused kernel memory: 704K
  265. [ 6.012129] Run /sbin/init as init process
  266. [ 6.031459] random: fast init done
  267. [ 6.625679] udevd[1131]: starting version 3.2.5
  268. [ 6.634427] random: udevd: uninitialized urandom read (16 bytes read)
  269. [ 6.637928] random: udevd: uninitialized urandom read (16 bytes read)
  270. [ 6.641679] random: udevd: uninitialized urandom read (16 bytes read)
  271. [ 6.759307] udevd[1133]: starting eudev-3.2.5
  272. [ 12.600832] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  273. [ 14.169952] urandom_read: 4 callbacks suppressed
  274. [ 14.169958] random: dd: uninitialized urandom read (512 bytes read)
  275. [ 14.614199] random: dropbear: uninitialized urandom read (32 bytes read)
  276. [ 27.264872] random: lighttpd: uninitialized urandom read (32 bytes read)
  277. [ 98.988004] random: crng init done
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!