Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.14.71-ti-rt-r78 (root@a4-imx6q-wandboard-2gb) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PREEMPT RT Tue Sep 25 21:40:07 UTC 2018
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Green
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 48 MiB at 0x9c800000
- [ 0.000000] On node 0 totalpages: 130560
- [ 0.000000] free_area_init_node: node 0, pgdat c15f1cc0, node_mem_map df961000
- [ 0.000000] Normal zone: 1148 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 130560 pages, LIFO batch:31
- [ 0.000000] CPU: All CPU(s) started in SVC mode.
- [ 0.000000] AM335X ES2.1 (sgx neon)
- [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x460 with crng_init=0
- [ 0.000000] percpu: Embedded 18 pages/cpu @df8e8000 s42912 r8192 d22624 u73728
- [ 0.000000] pcpu-alloc: s42912 r8192 d22624 u73728 alloc=18*4096
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412
- [ 0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 439828K/522240K available (13312K kernel code, 1091K rwdata, 4344K rodata, 1024K init, 379K bss, 33260K reserved, 49152K cma-reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
- lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc0e00000 (14304 kB)
- .init : 0xc1400000 - 0xc1500000 (1024 kB)
- .data : 0xc1500000 - 0xc1610d20 (1092 kB)
- .bss : 0xc161aafc - 0xc1679928 ( 380 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] ftrace: allocating 42264 entries in 124 pages
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
- [ 0.000000] No expedited grace period (rcu_normal_after_boot).
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
- [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
- [ 0.000025] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
- [ 0.000040] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000048] OMAP clocksource: timer1 at 24000000 Hz
- [ 0.002072] timer_probe: no matching timers found
- [ 0.002422] Console: colour dummy device 80x30
- [ 0.002470] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
- [ 0.002474] This ensures that you still see kernel messages. Please
- [ 0.002477] update your kernel commandline.
- [ 0.002500] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
- [ 0.021135] pid_max: default: 32768 minimum: 301
- [ 0.021437] Security Framework initialized
- [ 0.021450] Yama: becoming mindful.
- [ 0.021489] AppArmor: AppArmor disabled by boot time parameter
- [ 0.021576] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.021585] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.022715] CPU: Testing write buffer coherency: ok
- [ 0.023277] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- [ 0.037284] Setting up static identity map for 0x80100000 - 0x80100060
- [ 0.053143] Hierarchical SRCU implementation.
- [ 0.080531] EFI services will not be available.
- [ 0.085177] smp: Bringing up secondary CPUs ...
- [ 0.085193] smp: Brought up 1 node, 1 CPU
- [ 0.085204] SMP: Total of 1 processors activated (995.32 BogoMIPS).
- [ 0.085211] CPU: All CPU(s) started in SVC mode.
- [ 0.087101] devtmpfs: initialized
- [ 0.149552] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 0.150202] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.150235] futex hash table entries: 256 (order: 2, 16384 bytes)
- [ 0.154397] xor: measuring software checksum speed
- [ 0.193211] arm4regs : 1217.000 MB/sec
- [ 0.233141] 8regs : 1091.000 MB/sec
- [ 0.273139] 32regs : 1088.000 MB/sec
- [ 0.273146] xor: using function: arm4regs (1217.000 MB/sec)
- [ 0.273170] pinctrl core: initialized pinctrl subsystem
- [ 0.274472] DMI not present or invalid.
- [ 0.275224] NET: Registered protocol family 16
- [ 0.283615] DMA: preallocated 1024 KiB pool for atomic coherent allocations
- [ 0.375760] omap_hwmod: debugss: _wait_target_disable failed
- [ 0.427329] OMAP GPIO hardware version 0.1
- [ 0.468561] No ATAGs?
- [ 0.468583] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.470238] omap4_sram_init:Unable to allocate sram needed to handle errata I688
- [ 0.470257] omap4_sram_init:Unable to get sram pool needed to handle errata I688
- [ 0.573316] raid6: int32x4 gen() 326 MB/s
- [ 0.641262] raid6: int32x4 xor() 266 MB/s
- [ 0.641271] raid6: using algorithm int32x4 gen() 326 MB/s
- [ 0.641276] raid6: .... xor() 266 MB/s, rmw enabled
- [ 0.641283] raid6: using intx1 recovery algorithm
- [ 0.655907] edma 49000000.edma: TI EDMA DMA engine driver
- [ 0.665319] SCSI subsystem initialized
- [ 0.669321] libata version 3.00 loaded.
- [ 0.669801] usbcore: registered new interface driver usbfs
- [ 0.669917] usbcore: registered new interface driver hub
- [ 0.670073] usbcore: registered new device driver usb
- [ 0.671627] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
- [ 0.672911] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
- [ 0.675084] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
- [ 0.675780] media: Linux media interface: v0.10
- [ 0.675857] Linux video capture interface: v2.00
- [ 0.676082] pps_core: LinuxPPS API ver. 1 registered
- [ 0.676089] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.676117] PTP clock support registered
- [ 0.676324] dmi: Firmware registration failed.
- [ 0.677070] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
- [ 0.681678] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.682841] NetLabel: Initializing
- [ 0.682853] NetLabel: domain hash size = 128
- [ 0.682858] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 0.682973] NetLabel: unlabeled traffic allowed by default
- [ 0.684189] clocksource: Switched to clocksource timer1
- [ 1.036406] VFS: Disk quotas dquot_6.6.0
- [ 1.036575] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.057897] NET: Registered protocol family 2
- [ 1.059181] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 1.059254] TCP bind hash table entries: 4096 (order: 4, 114688 bytes)
- [ 1.059446] TCP: Hash tables configured (established 4096 bind 4096)
- [ 1.059635] UDP hash table entries: 256 (order: 2, 16384 bytes)
- [ 1.059679] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes)
- [ 1.060334] NET: Registered protocol family 1
- [ 1.069748] RPC: Registered named UNIX socket transport module.
- [ 1.069762] RPC: Registered udp transport module.
- [ 1.069771] RPC: Registered tcp transport module.
- [ 1.069778] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.071050] Unpacking initramfs...
- [ 1.408918] Freeing initrd memory: 4688K
- [ 1.409565] hw perfevents: no interrupt-affinity property for /pmu, guessing.
- [ 1.409896] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
- [ 1.413585] audit: initializing netlink subsys (disabled)
- [ 1.415424] audit: type=2000 audit(1.412:1): state=initialized audit_enabled=0 res=1
- [ 1.415627] workingset: timestamp_bits=14 max_order=17 bucket_order=3
- [ 1.427728] zbud: loaded
- [ 1.441658] NFS: Registering the id_resolver key type
- [ 1.441747] Key type id_resolver registered
- [ 1.441754] Key type id_legacy registered
- [ 1.441783] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 1.442272] fuse init (API version 7.26)
- [ 1.443312] SGI XFS with ACLs, security attributes, realtime, no debug enabled
- [ 1.467491] Key type asymmetric registered
- [ 1.467508] Asymmetric key parser 'x509' registered
- [ 1.467677] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 1.472096] io scheduler noop registered
- [ 1.472108] io scheduler deadline registered
- [ 1.472892] io scheduler cfq registered (default)
- [ 1.472906] io scheduler mq-deadline registered
- [ 1.477191] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
- [ 1.499018] gpio-of-helper ocp:cape-universal: ready
- [ 1.518847] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
- [ 1.524411] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
- [ 1.531023] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250
- [ 1.547395] console [ttyS0] enabled
- [ 1.549385] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 31, base_baud = 3000000) is a 8250
- [ 1.551063] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 32, base_baud = 3000000) is a 8250
- [ 1.552929] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 33, base_baud = 3000000) is a 8250
- [ 1.554630] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 34, base_baud = 3000000) is a 8250
- [ 1.556506] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 35, base_baud = 3000000) is a 8250
- [ 1.561882] omap_rng 48310000.rng: Random Number Generator ver. 20
- [ 1.563911] [drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0
- [ 1.564080] usbcore: registered new interface driver udl
- [ 1.577632] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- [ 1.578056] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- [ 1.578426] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- [ 1.578786] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- [ 1.579699] eqep 48300180.eqep: ver. 1.0
- [ 1.580588] eqep 48300180.eqep: count_mode:0
- [ 1.580603] eqep 48300180.eqep: invert_qa:1
- [ 1.580611] eqep 48300180.eqep: invert_qb:1
- [ 1.580620] eqep 48300180.eqep: invert_qi:0
- [ 1.580629] eqep 48300180.eqep: invert_qs:0
- [ 1.580637] eqep 48300180.eqep: swap_inputs:0
- [ 1.580646] eqep 48300180.eqep: QDECCTL:0x0180
- [ 1.580655] eqep 48300180.eqep: QPOSINIT:0x00000000
- [ 1.580663] eqep 48300180.eqep: QPOSMAX:0xffffffff
- [ 1.580670] eqep 48300180.eqep: QPOSCNT:0x00000000
- [ 1.580679] eqep 48300180.eqep: omit_interrupt:0
- [ 1.580687] eqep 48300180.eqep: QEINT:0x0800
- [ 1.580695] eqep 48300180.eqep: QUPRD:0x05f5e100
- [ 1.580702] eqep 48300180.eqep: QEPCTL:0x009e write
- [ 1.580709] eqep 48300180.eqep: QEPCTL:0x009e read
- [ 1.580758] eqep 48300180.eqep: irq:132, clk_rate:100000000
- [ 1.581097] eqep 48302180.eqep: ver. 1.0
- [ 1.581626] eqep 48302180.eqep: count_mode:0
- [ 1.581639] eqep 48302180.eqep: invert_qa:1
- [ 1.581647] eqep 48302180.eqep: invert_qb:1
- [ 1.581655] eqep 48302180.eqep: invert_qi:0
- [ 1.581663] eqep 48302180.eqep: invert_qs:0
- [ 1.581672] eqep 48302180.eqep: swap_inputs:0
- [ 1.581680] eqep 48302180.eqep: QDECCTL:0x0180
- [ 1.581688] eqep 48302180.eqep: QPOSINIT:0x00000000
- [ 1.581695] eqep 48302180.eqep: QPOSMAX:0xffffffff
- [ 1.581702] eqep 48302180.eqep: QPOSCNT:0x00000000
- [ 1.581711] eqep 48302180.eqep: omit_interrupt:0
- [ 1.581718] eqep 48302180.eqep: QEINT:0x0800
- [ 1.581726] eqep 48302180.eqep: QUPRD:0x05f5e100
- [ 1.581733] eqep 48302180.eqep: QEPCTL:0x009e write
- [ 1.581740] eqep 48302180.eqep: QEPCTL:0x009e read
- [ 1.581781] eqep 48302180.eqep: irq:134, clk_rate:100000000
- [ 1.582004] eqep 48304180.eqep: ver. 1.0
- [ 1.582527] eqep 48304180.eqep: count_mode:0
- [ 1.582540] eqep 48304180.eqep: invert_qa:1
- [ 1.582548] eqep 48304180.eqep: invert_qb:1
- [ 1.582556] eqep 48304180.eqep: invert_qi:0
- [ 1.582564] eqep 48304180.eqep: invert_qs:0
- [ 1.582573] eqep 48304180.eqep: swap_inputs:0
- [ 1.582580] eqep 48304180.eqep: QDECCTL:0x0180
- [ 1.582589] eqep 48304180.eqep: QPOSINIT:0x00000000
- [ 1.582596] eqep 48304180.eqep: QPOSMAX:0xffffffff
- [ 1.582604] eqep 48304180.eqep: QPOSCNT:0x00000000
- [ 1.582612] eqep 48304180.eqep: omit_interrupt:0
- [ 1.582620] eqep 48304180.eqep: QEINT:0x0800
- [ 1.582627] eqep 48304180.eqep: QUPRD:0x05f5e100
- [ 1.582634] eqep 48304180.eqep: QEPCTL:0x009e write
- [ 1.582642] eqep 48304180.eqep: QEPCTL:0x009e read
- [ 1.582682] eqep 48304180.eqep: irq:136, clk_rate:100000000
- [ 1.662964] libphy: Fixed MDIO Bus: probed
- [ 1.664722] CAN device driver interface
- [ 1.666606] c_can_platform 481cc000.can: c_can_platform device registered (regs=fa1cc000, irq=42)
- [ 1.668085] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=43)
- [ 1.724354] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
- [ 1.724373] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
- [ 1.725384] MDIO: davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
- [ 1.743345] libphy: 4a101000.mdio: probed
- [ 1.743375] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
- [ 1.745436] cpsw 4a100000.ethernet: Detected MACID = 88:4a:ea:f5:45:e6
- [ 1.745628] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
- [ 1.745637] cpsw 4a100000.ethernet: ALE Table size 1024
- [ 1.745713] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies)
- [ 1.753540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.753642] ehci-platform: EHCI generic platform driver
- [ 1.754332] ehci-omap: OMAP-EHCI Host Controller driver
- [ 1.755924] usbcore: registered new interface driver usb-storage
- [ 1.761382] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
- [ 1.766103] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
- [ 1.772428] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
- [ 1.772480] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
- [ 1.772882] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.772893] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.772902] usb usb1: Product: MUSB HDRC host driver
- [ 1.772910] usb usb1: Manufacturer: Linux 4.14.71-ti-rt-r78 musb-hcd
- [ 1.772918] usb usb1: SerialNumber: musb-hdrc.1
- [ 1.774412] hub 1-0:1.0: USB hub found
- [ 1.774522] hub 1-0:1.0: 1 port detected
- [ 1.795567] omap_rtc 44e3e000.rtc: already running
- [ 1.797713] omap_rtc 44e3e000.rtc: registered as rtc0
- [ 1.800729] i2c /dev entries driver
- [ 1.802835] Driver for 1-wire Dallas network protocol.
- [ 1.809656] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
- [ 1.810667] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
- [ 1.815102] sdhci: Secure Digital Host Controller Interface driver
- [ 1.815116] sdhci: Copyright(c) Pierre Ossman
- [ 1.816604] omap_hsmmc 48060000.mmc: Got CD GPIO
- [ 1.901209] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.908841] dmi-sysfs: dmi entry is absent.
- [ 1.916967] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
- [ 1.917306] omap-aes 53500000.aes: will run requests pump with realtime priority
- [ 1.921763] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
- [ 1.927242] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.928858] usbcore: registered new interface driver usbhid
- [ 1.928869] usbhid: USB HID core driver
- [ 1.929608] remoteproc remoteproc0: wkup_m3 is available
- [ 1.938860] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 1.942779] mmc0: new high speed SDHC card at address aaaa
- [ 1.948516] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
- [ 1.951072] mmcblk0: p1
- [ 1.955616] mmc1: new high speed MMC card at address 0001
- [ 1.958109] NET: Registered protocol family 10
- [ 1.959361] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB
- [ 1.960577] mmcblk1boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB
- [ 1.961364] mmcblk1boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB
- [ 1.962009] mmcblk1rpmb: mmc1:0001 Q2J54A partition 3 512 KiB
- [ 1.964370] mmcblk1: p1
- [ 1.966234] Segment Routing with IPv6
- [ 1.966354] mip6: Mobile IPv6
- [ 1.966380] NET: Registered protocol family 17
- [ 1.966409] can: controller area network core (rev 20170425 abi 9)
- [ 1.966628] NET: Registered protocol family 29
- [ 1.966917] Key type dns_resolver registered
- [ 1.966925] mpls_gso: MPLS GSO support
- [ 1.967217] omap_voltage_late_init: Voltage driver support not added
- [ 1.978331] PM: Cannot get wkup_m3_ipc handle
- [ 1.983095] ThumbEE CPU extension supported.
- [ 1.983143] Registering SWP/SWPB emulation handler
- [ 1.984844] registered taskstats version 1
- [ 1.985011] zswap: loaded using pool lzo/zbud
- [ 1.988416] Btrfs loaded, crc32c=crc32c-generic
- [ 1.988564] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
- [ 1.988588] ima: Allocated hash algorithm: sha256
- [ 2.049558] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
- [ 2.050224] tps65217 0-0024: TPS65217 ID 0xe version 1.2
- [ 2.050951] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- [ 2.051166] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
- [ 2.054046] remoteproc remoteproc0: powering up wkup_m3
- [ 2.054185] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
- [ 2.056656] remoteproc remoteproc0: remote processor wkup_m3 is now up
- [ 2.056715] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193
- [ 2.065932] PM: bootloader does not support rtc-only!
- [ 2.067745] omap_rtc 44e3e000.rtc: setting system clock to 2018-09-30 16:33:38 UTC (1538325218)
- [ 2.067765] of_cfs_init
- [ 2.068006] of_cfs_init: OK
- [ 2.070131] ALSA device list:
- [ 2.070146] No soundcards found.
- [ 2.077058] Freeing unused kernel memory: 1024K
- [ 2.621188] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 2.622281] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 2.622424] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 135.226893] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- [ 154.635559] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 154.671936] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
- [ 154.673351] systemd[1]: Detected architecture arm.
- [ 154.675118] systemd[1]: Set hostname to <beaglebone>.
- [ 155.430444] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 155.431443] systemd[1]: Listening on Syslog Socket.
- [ 155.431936] systemd[1]: Listening on udev Kernel Socket.
- [ 155.434650] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 155.435678] systemd[1]: Listening on Journal Audit Socket.
- [ 155.435916] systemd[1]: Reached target Remote File Systems.
- [ 155.438680] systemd[1]: Created slice User and Session Slice.
- [ 156.032385] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
- [ 157.697187] systemd-journald[753]: Received request to flush runtime journal from PID 1
- [ 163.503034] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
- [ 164.345065] net eth0: initializing cpsw version 1.12 (0)
- [ 164.421854] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)
- [ 164.465750] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 165.429299] using random self ethernet address
- [ 165.429326] using random host ethernet address
- [ 165.506418] using random self ethernet address
- [ 165.506444] using random host ethernet address
- [ 165.751635] usb0: HOST MAC 88:4a:ea:f5:45:e7
- [ 165.751923] usb0: MAC 88:4a:ea:f5:45:e8
- [ 165.758641] usb1: HOST MAC 88:4a:ea:f5:45:ea
- [ 165.758789] usb1: MAC 88:4a:ea:f5:45:eb
- [ 166.211861] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
- [ 166.234618] configfs-gadget gadget: high-speed config #1: c
- [ 166.235697] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
- [ 292.226733] pruss 4a300000.pruss: creating PRU cores and other child platform devices
- [ 292.536541] remoteproc remoteproc1: 4a334000.pru is available
- [ 292.536788] pru-rproc 4a334000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@34000 probed successfully
- [ 292.538750] remoteproc remoteproc2: 4a338000.pru is available
- [ 292.538949] pru-rproc 4a338000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@38000 probed successfully
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement