API tools faq
paste
dhiltonp

jackpot3 stuck limit switch

dhiltonp
Nov 3rd, 2026
186
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 2.79 KB | None | 0 0
raw download clone embed print report
  1. [MSG:INFO: FluidNC v4.1.1 https://github.com/bdring/FluidNC]
  2. [MSG:INFO: Local filesystem is /littlefs]
  3. [MSG:INFO: Configuration file:config.yaml]
  4. [MSG:INFO: Machine LowRider]
  5. [MSG:INFO: Board Jackpot3 TMC2226]
  6. [MSG:INFO: UART1 Tx:gpio.16 Rx:gpio.4 RTS:NO_PIN Baud:115200]
  7. [MSG:INFO: I2SO BCK:gpio.22 WS:gpio.17 DATA:gpio.21Min Pulse:2us]
  8. [MSG:INFO: SPI SCK:gpio.18 MOSI:gpio.23 MISO:gpio.19]
  9. [MSG:INFO: SD Card cs_pin:gpio.5 detect:NO_PIN freq:20000000]
  10. [MSG:INFO: Stepping:I2S Pulse:2us Dsbl Delay:0us Dir Delay:1us Idle Delay:255ms]
  11. [MSG:INFO: User Digital Output: 0 on Pin:gpio.26]
  12. [MSG:INFO: User Digital Output: 1 on Pin:gpio.27]
  13. [MSG:INFO: User Digital Output: 2 on Pin:gpio.0]
  14. [MSG:INFO: User Digital Output: 3 on Pin:gpio.2]
  15. [MSG:INFO: Axis count 3]
  16. [MSG:INFO: Axis X (2.980,1223.020)]
  17. [MSG:INFO: Motor0]
  18. [MSG:INFO: tmc_2209 UART1 Addr:0 CS:NO_PIN Step:I2SO.2 Dir:I2SO.1 Disable:I2SO.0 R:0.110]
  19. [MSG:INFO: X Neg Limit gpio.25]
  20. [MSG:INFO: Axis Y (2.980,2443.020)]
  21. [MSG:INFO: Motor0]
  22. [MSG:INFO: tmc_2209 UART1 Addr:1 CS:NO_PIN Step:I2SO.5 Dir:I2SO.4 Disable:I2SO.7 R:0.110]
  23. [MSG:INFO: Y Neg Limit gpio.33]
  24. [MSG:INFO: Motor1]
  25. [MSG:INFO: tmc_2209 UART1 Addr:3 CS:I2SO.14 Step:I2SO.13 Dir:I2SO.12 Disable:I2SO.15 R:0.110]
  26. [MSG:INFO: Y2 Neg Limit gpio.35]
  27. [MSG:INFO: Axis Z (-147.005,3.005)]
  28. [MSG:INFO: Motor0]
  29. [MSG:INFO: tmc_2209 UART1 Addr:2 CS:NO_PIN Step:I2SO.10 Dir:I2SO.9 Disable:I2SO.8 R:0.110]
  30. [MSG:INFO: Z Pos Limit gpio.32]
  31. [MSG:INFO: Motor1]
  32. [MSG:INFO: tmc_2209 UART1 Addr:3 CS:I2SO.19 Step:I2SO.18 Dir:I2SO.17 Disable:I2SO.16 R:0.110]
  33. [MSG:INFO: Z2 Pos Limit gpio.34]
  34. [MSG:INFO: X Axis driver test passed]
  35. [MSG:INFO: Y Axis driver test passed]
  36. [MSG:INFO: Y2 Axis driver test passed]
  37. [MSG:INFO: Z Axis driver test passed]
  38. [MSG:INFO: Z2 Axis driver test passed]
  39. [MSG:INFO: Kinematic system: Cartesian]
  40. [MSG:INFO: Hostname is fluidnc]
  41. [MSG:INFO: Connecting to STA SSID:cake-g]
  42. [MSG:INFO: Connected - IP is 192.168.189.8]
  43. [MSG:INFO: WiFi on]
  44. [MSG:INFO: Start mDNS with hostname:http://fluidnc.local/]
  45. [MSG:INFO: HTTP started on port 80]
  46. [MSG:INFO: Telnet started on port 23]
  47. [MSG:INFO: HTTP command registered]
  48. [MSG:INFO: Probe gpio.36:low]
  49. [MSG:INFO: ALARM: Homing Fail Approach]
  50. ALARM:9
  51. [MSG:INFO: Caution: Unlocked]
  52. [MSG:INFO: ALARM: Homing Fail Pulloff]
  53. ALARM:8
  54. > $limits
  55. Send ! to exit
  56. Homing Axes : xyz
  57. Limit Axes :
  58. PosLimitPins NegLimitPins Probe Toolsetter
  59. : Z
  60. : Z
  61. : Z
  62. : Z
  63. : Z
  64. : Z
  65. : Z
  66. : Z
  67. : Z
  68. : Z
  69. : Z
  70. : Z
  71. : Z
  72. : Z
  73. : Z
  74. : Z
  75. : Z
  76. : Z
  77. : Z
  78. : Z
  79. : Z
  80. : Z
  81. : Z
  82. : Z
  83. > !
Advertisement
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!