API tools faq
paste
dhiltonp

jackpot3 stuck limit switch

dhiltonp
Nov 3rd, 2026
324
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 2.79 KB | None | 0 0
raw download clone embed print report
  1. [MSG:INFO: FluidNC v4.1.1 https://github.com/bdring/FluidNC]
  2. [MSG:INFO: Local filesystem is /littlefs]
  3. [MSG:INFO: Configuration file:config.yaml]
  4. [MSG:INFO: Machine LowRider]
  5. [MSG:INFO: Board Jackpot3 TMC2226]
  6. [MSG:INFO: UART1 Tx:gpio.16 Rx:gpio.4 RTS:NO_PIN Baud:115200]
  7. [MSG:INFO: I2SO BCK:gpio.22 WS:gpio.17 DATA:gpio.21Min Pulse:2us]
  8. [MSG:INFO: SPI SCK:gpio.18 MOSI:gpio.23 MISO:gpio.19]
  9. [MSG:INFO: SD Card cs_pin:gpio.5 detect:NO_PIN freq:20000000]
  10. [MSG:INFO: Stepping:I2S Pulse:2us Dsbl Delay:0us Dir Delay:1us Idle Delay:255ms]
  11. [MSG:INFO: User Digital Output: 0 on Pin:gpio.26]
  12. [MSG:INFO: User Digital Output: 1 on Pin:gpio.27]
  13. [MSG:INFO: User Digital Output: 2 on Pin:gpio.0]
  14. [MSG:INFO: User Digital Output: 3 on Pin:gpio.2]
  15. [MSG:INFO: Axis count 3]
  16. [MSG:INFO: Axis X (2.980,1223.020)]
  17. [MSG:INFO: Motor0]
  18. [MSG:INFO: tmc_2209 UART1 Addr:0 CS:NO_PIN Step:I2SO.2 Dir:I2SO.1 Disable:I2SO.0 R:0.110]
  19. [MSG:INFO: X Neg Limit gpio.25]
  20. [MSG:INFO: Axis Y (2.980,2443.020)]
  21. [MSG:INFO: Motor0]
  22. [MSG:INFO: tmc_2209 UART1 Addr:1 CS:NO_PIN Step:I2SO.5 Dir:I2SO.4 Disable:I2SO.7 R:0.110]
  23. [MSG:INFO: Y Neg Limit gpio.33]
  24. [MSG:INFO: Motor1]
  25. [MSG:INFO: tmc_2209 UART1 Addr:3 CS:I2SO.14 Step:I2SO.13 Dir:I2SO.12 Disable:I2SO.15 R:0.110]
  26. [MSG:INFO: Y2 Neg Limit gpio.35]
  27. [MSG:INFO: Axis Z (-147.005,3.005)]
  28. [MSG:INFO: Motor0]
  29. [MSG:INFO: tmc_2209 UART1 Addr:2 CS:NO_PIN Step:I2SO.10 Dir:I2SO.9 Disable:I2SO.8 R:0.110]
  30. [MSG:INFO: Z Pos Limit gpio.32]
  31. [MSG:INFO: Motor1]
  32. [MSG:INFO: tmc_2209 UART1 Addr:3 CS:I2SO.19 Step:I2SO.18 Dir:I2SO.17 Disable:I2SO.16 R:0.110]
  33. [MSG:INFO: Z2 Pos Limit gpio.34]
  34. [MSG:INFO: X Axis driver test passed]
  35. [MSG:INFO: Y Axis driver test passed]
  36. [MSG:INFO: Y2 Axis driver test passed]
  37. [MSG:INFO: Z Axis driver test passed]
  38. [MSG:INFO: Z2 Axis driver test passed]
  39. [MSG:INFO: Kinematic system: Cartesian]
  40. [MSG:INFO: Hostname is fluidnc]
  41. [MSG:INFO: Connecting to STA SSID:cake-g]
  42. [MSG:INFO: Connected - IP is 192.168.189.8]
  43. [MSG:INFO: WiFi on]
  44. [MSG:INFO: Start mDNS with hostname:http://fluidnc.local/]
  45. [MSG:INFO: HTTP started on port 80]
  46. [MSG:INFO: Telnet started on port 23]
  47. [MSG:INFO: HTTP command registered]
  48. [MSG:INFO: Probe gpio.36:low]
  49. [MSG:INFO: ALARM: Homing Fail Approach]
  50. ALARM:9
  51. [MSG:INFO: Caution: Unlocked]
  52. [MSG:INFO: ALARM: Homing Fail Pulloff]
  53. ALARM:8
  54. > $limits
  55. Send ! to exit
  56. Homing Axes : xyz
  57. Limit Axes :
  58. PosLimitPins NegLimitPins Probe Toolsetter
  59. : Z
  60. : Z
  61. : Z
  62. : Z
  63. : Z
  64. : Z
  65. : Z
  66. : Z
  67. : Z
  68. : Z
  69. : Z
  70. : Z
  71. : Z
  72. : Z
  73. : Z
  74. : Z
  75. : Z
  76. : Z
  77. : Z
  78. : Z
  79. : Z
  80. : Z
  81. : Z
  82. : Z
  83. > !
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!