Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win10] (sf-6.5-1)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: TOSHIBA THNSNH512GBST
- Serial Number: 53JS10B0TECY
- LU WWN Device Id: 5 00080d b100053fa
- Firmware Version: HTRAN101
- User Capacity: 512,110,190,592 bytes [512 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Sep 11 13:24:52 2017 CST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 254 (maximum performance)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, frozen [SEC2]
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 27) minutes.
- SCT capabilities: (0x0039) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0
- 2 Throughput_Performance P-S--- 100 100 050 - 0
- 3 Spin_Up_Time POS--- 100 100 050 - 0
- 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
- 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
- 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
- 9 Power_On_Hours -O--C- 100 100 000 - 21624
- 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
- 12 Power_Cycle_Count -O--C- 100 100 000 - 2034
- 167 Unknown_Attribute -O---K 100 100 000 - 0
- 168 Unknown_Attribute -O--C- 100 100 000 - 9
- 169 Unknown_Attribute PO--C- 100 100 010 - 100
- 173 Unknown_Attribute -O--C- 196 196 000 - 0
- 175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
- 192 Power-Off_Retract_Count -O--C- 100 100 000 - 648
- 194 Temperature_Celsius PO---K 070 043 020 - 30 (Min/Max 14/57)
- 197 Current_Pending_Sector -O--C- 100 100 000 - 0
- 240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 51 Comprehensive SMART error log
- 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 SATA NCQ Queued Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
- Device Error Count: 7
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 7 [6] occurred at disk power-on lifetime: 18755 hours (781 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 00 00 00 40 00 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 00 00 00 00 00 00 00 40 00 00:17:34.585 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:17:34.320 READ LOG EXT
- 60 00 08 00 00 00 00 80 00 00 19 40 00 00:17:34.273 READ FPDMA QUEUED
- 60 00 01 00 00 00 00 00 00 00 00 40 00 00:17:34.273 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:17:34.007 READ LOG EXT
- Error 6 [5] occurred at disk power-on lifetime: 18755 hours (781 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 00 00 00 40 00 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 00 00 00 00 00 00 00 40 00 00:16:32.789 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:16:32.523 READ LOG EXT
- 60 00 08 00 00 00 00 7f ff ff f9 40 00 00:16:32.476 READ FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00 00 00 00 00 00:16:32.476 IDENTIFY DEVICE
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:16:32.273 READ LOG EXT
- Error 5 [4] occurred at disk power-on lifetime: 18755 hours (781 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 00 00 00 40 00 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 00 00 00 00 00 00 00 40 00 00:15:30.563 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:15:30.297 READ LOG EXT
- 60 00 08 00 00 00 00 80 01 ff f1 40 00 00:15:30.251 READ FPDMA QUEUED
- 60 00 01 00 00 00 00 00 00 00 00 40 00 00:15:30.251 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:15:29.985 READ LOG EXT
- Error 4 [3] occurred at disk power-on lifetime: 18755 hours (781 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 00 00 01 40 00 Error: UNC at LBA = 0x00000001 = 1
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 00 00 00 00 00 00 01 40 00 00:13:04.878 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:13:04.613 READ LOG EXT
- 60 00 08 00 00 00 00 7f ff ff f9 40 00 00:13:04.566 READ FPDMA QUEUED
- 60 00 01 00 00 00 00 00 00 00 00 40 00 00:13:04.566 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:13:04.332 READ LOG EXT
- Error 3 [2] occurred at disk power-on lifetime: 18755 hours (781 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 00 00 01 40 00 Error: UNC at LBA = 0x00000001 = 1
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 00 00 00 00 00 00 01 40 00 00:12:02.872 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:12:02.606 READ LOG EXT
- 61 00 01 00 00 00 00 ff ff ff ff 40 00 00:12:02.559 WRITE FPDMA QUEUED
- 60 00 01 00 00 00 00 00 00 00 00 40 00 00:12:02.559 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:12:02.356 READ LOG EXT
- Error 2 [1] occurred at disk power-on lifetime: 18755 hours (781 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 00 00 00 40 00 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 00 00 00 00 00 00 00 40 00 00:11:00.824 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:11:00.558 READ LOG EXT
- 60 00 08 00 00 00 00 80 00 00 01 40 00 00:11:00.511 READ FPDMA QUEUED
- 60 00 01 00 00 00 00 00 00 00 00 40 00 00:11:00.511 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:11:00.246 READ LOG EXT
- Error 1 [0] occurred at disk power-on lifetime: 18755 hours (781 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 00 00 00 40 00 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 00 00 00 00 00 00 00 40 00 00:09:59.027 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:09:58.766 READ LOG EXT
- 61 00 01 00 00 00 00 ff ff ff ff 40 00 00:09:58.732 WRITE FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00 00 00 00 00 00:09:58.731 IDENTIFY DEVICE
- 2f 00 00 00 01 00 00 00 00 00 10 28 00 00:09:58.513 READ LOG EXT
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 21623 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 3 (0x0003)
- SCT Support Level: 0
- Device State: Active (0)
- Current Temperature: 30 Celsius
- Power Cycle Min/Max Temperature: 28/44 Celsius
- Lifetime Min/Max Temperature: 14/57 Celsius
- Lifetime Average Temperature: 14 Celsius
- Under/Over Temperature Limit Count: 0/9
- Vendor specific:
- 00 00 04 00 01 01 00 05 05 00 00 00 00 00 00 00
- 00 02 00 00 25 da a3 04 04 04 00 00 00 00 00 05
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 5/40 Celsius
- Min/Max Temperature Limit: 0/80 Celsius
- Temperature History Size (Index): 128 (26)
- Index Estimated Time Temperature Celsius
- 27 2017-09-11 11:17 34 ***************
- ... ..( 15 skipped). .. ***************
- 43 2017-09-11 11:33 34 ***************
- 44 2017-09-11 11:34 33 **************
- ... ..( 36 skipped). .. **************
- 81 2017-09-11 12:11 33 **************
- 82 2017-09-11 12:12 ? -
- 83 2017-09-11 12:13 30 ***********
- 84 2017-09-11 12:14 29 **********
- 85 2017-09-11 12:15 29 **********
- 86 2017-09-11 12:16 33 **************
- 87 2017-09-11 12:17 35 ****************
- 88 2017-09-11 12:18 36 *****************
- 89 2017-09-11 12:19 37 ******************
- 90 2017-09-11 12:20 38 *******************
- 91 2017-09-11 12:21 39 ********************
- 92 2017-09-11 12:22 40 *********************
- 93 2017-09-11 12:23 40 *********************
- 94 2017-09-11 12:24 41 **********************
- 95 2017-09-11 12:25 42 ***********************
- 96 2017-09-11 12:26 42 ***********************
- 97 2017-09-11 12:27 43 ************************
- 98 2017-09-11 12:28 43 ************************
- 99 2017-09-11 12:29 44 *************************
- 100 2017-09-11 12:30 44 *************************
- 101 2017-09-11 12:31 44 *************************
- 102 2017-09-11 12:32 41 **********************
- 103 2017-09-11 12:33 39 ********************
- 104 2017-09-11 12:34 37 ******************
- 105 2017-09-11 12:35 36 *****************
- 106 2017-09-11 12:36 35 ****************
- 107 2017-09-11 12:37 34 ***************
- 108 2017-09-11 12:38 33 **************
- 109 2017-09-11 12:39 33 **************
- 110 2017-09-11 12:40 32 *************
- ... ..( 2 skipped). .. *************
- 113 2017-09-11 12:43 32 *************
- 114 2017-09-11 12:44 31 ************
- ... ..( 8 skipped). .. ************
- 123 2017-09-11 12:53 31 ************
- 124 2017-09-11 12:54 30 ***********
- ... ..( 6 skipped). .. ***********
- 3 2017-09-11 13:01 30 ***********
- 4 2017-09-11 13:02 ? -
- 5 2017-09-11 13:03 30 ***********
- ... ..( 20 skipped). .. ***********
- 26 2017-09-11 13:24 30 ***********
- SCT Error Recovery Control:
- Read: 600 (60.0 seconds)
- Write: 600 (60.0 seconds)
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 2) ==
- 0x01 0x008 4 2034 --- Lifetime Power-On Resets
- 0x01 0x018 6 33328316305 --- Logical Sectors Written
- 0x01 0x020 6 573340777 --- Number of Write Commands
- 0x01 0x028 6 27024972995 --- Logical Sectors Read
- 0x01 0x030 6 308304073 --- Number of Read Commands
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 7 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 30 --- Current Temperature
- 0x05 0x010 1 35 --- Average Short Term Temperature
- 0x05 0x018 1 34 --- Average Long Term Temperature
- 0x05 0x020 1 56 --- Highest Temperature
- 0x05 0x028 1 16 --- Lowest Temperature
- 0x05 0x030 1 54 --- Highest Average Short Term Temperature
- 0x05 0x038 1 18 --- Lowest Average Short Term Temperature
- 0x05 0x040 1 47 --- Highest Average Long Term Temperature
- 0x05 0x048 1 19 --- Lowest Average Long Term Temperature
- 0x05 0x050 4 349460 --- Time in Over-Temperature
- 0x05 0x058 1 40 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 5 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 46967 --- Number of Hardware Resets
- 0x06 0x018 4 9 --- Number of Interface CRC Errors
- 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
- 0x07 0x008 1 4 N-- Percentage Used Endurance Indicator
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 4 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 4 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 4 233 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement