API tools faq
paste
Guest User

hikey960 master (3.6.1)

a guest
Apr 2nd, 2020
176
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 70.67 KB | None | 0 0
raw download clone embed print report
  1. hikey960 boarid:5301 xloader use UART6
  2. scsysstat_value[0].
  3. clear reset source
  4. last_keypoint0,reboot_type0
  5. secdbg not DCU.
  6. SecDbgVer exit
  7.  
  8. xloader chipid is: 0x36600110, start at 348ms.
  9. Build Date: Dec 6 2017, 15:31:59
  10. [clock_init] ++
  11. hikey960 [hikey960_clk_init]
  12. hi3660 [clk_setup]
  13. [clock_init] --
  14. storage type is UFS
  15. ufs retry: 6 count v_tx:0 v_rx:0
  16. ufs set v_tx:0 v_rx:0
  17. Hikey960[5301] no need avs_init.
  18. ddr ft:0xf20332a3,mode:1 target:4
  19. UceLdOk
  20. density: 0x08080808,0x08080808,0x08080808,0x08080808,0x08080808,0x08080808,0x08080808,0x08080808
  21. ddr info 0x000004ff
  22. 400M
  23. 685M
  24. 1067M
  25. C2R,V0x00000030 e:113
  26. C0R,V0x00000032 e:66
  27. C1R,V0x00000031 e:66
  28. C2R,V0x00000031 e:66
  29. C3R,V0x00000031 e:113
  30. C0R,V0x00000033 e:66
  31. C1R,V0x00000032 e:66
  32. C2R,V0x00000032 e:66
  33. C3R,V0x00000032 e:66
  34. C0R,V0x00000034 e:66
  35. C1R,V0x00000033 e:66
  36. C2R,V0x00000033 e:65
  37. C3R,V0x00000033 e:65
  38. C0R,V0x00000030 e:66
  39. C0R,V0x00000031 e:66
  40. C1R,V0x00000031 e:66
  41. C2R,V0x00000032 e:66
  42. C3R,V0x00000032 e:66
  43. C0R,V0x00000032 e:66
  44. C1R,V0x00000032 e:66
  45. C2R,V0x00000033 e:66
  46. C3R,V0x00000033 e:66
  47. C0R,V0x00000033 e:65
  48. C1R,V0x00000033 e:66
  49. C2R,V0x00000034 e:65
  50. C3R,V0x00000034 e:66
  51. 1244M
  52. 1866M
  53. C0R,V0x00000017 e:66
  54. pack0Idx0Dcc:1
  55. pack1Idx0Dcc:0
  56. pack2Idx0Dcc:0
  57. pack3Idx0Dcc:1
  58. iomcu_subsys_init
  59. boot_c0 PROFILE 4
  60. slave0 irq0:0x00000004
  61. slave1 irq0:0x00000004
  62. NOTICE: BL2: v2.1(release):v2.1-604-g3441952f6
  63. NOTICE: BL2: Built : 21:51:44, Mar 31 2020
  64. NOTICE: ufs: H**** device must set VS_DebugSaveConfigTime 0x10
  65. NOTICE: BL2: Booting BL31
  66. NOTICE: BL31: v2.1(release):v2.1-604-g3441952f6
  67. NOTICE: BL31: Built : 21:51:44, Mar 31 2020
  68. D/TC:0 0 add_phys_mem:576 TEE_SHMEM_START type NSEC_SHM 0x3ee00000 size 0x00200000
  69. D/TC:0 0 add_phys_mem:576 TA_RAM_START type TA_RAM 0x3f200000 size 0x00e00000
  70. D/TC:0 0 add_phys_mem:576 VCORE_UNPG_RW_PA type TEE_RAM_RW 0x3f061000 size 0x0019f000
  71. D/TC:0 0 add_phys_mem:576 VCORE_UNPG_RX_PA type TEE_RAM_RX 0x3f000000 size 0x00061000
  72. D/TC:0 0 add_phys_mem:576 ROUNDDOWN(0xFFF32000, CORE_MMU_PGDIR_SIZE) type IO_NSEC 0xffe00000 size 0x00200000
  73. D/TC:0 0 verify_special_mem_areas:520 SDP memory [3e800000 3ec00000]
  74. D/TC:0 0 verify_special_mem_areas:520 NSEC DDR memory [40000000 c0000000]
  75. D/TC:0 0 verify_special_mem_areas:520 NSEC DDR memory [0 3e000000]
  76. D/TC:0 0 add_va_space:615 type RES_VASPACE size 0x00a00000
  77. D/TC:0 0 add_va_space:615 type SHM_VASPACE size 0x02000000
  78. D/TC:0 0 dump_mmap_table:751 type IO_NSEC va 0x3ae00000..0x3affffff pa 0xffe00000..0xffffffff size 0x00200000 (pgdir)
  79. D/TC:0 0 dump_mmap_table:751 type TA_RAM va 0x3b000000..0x3bdfffff pa 0x3f200000..0x3fffffff size 0x00e00000 (pgdir)
  80. D/TC:0 0 dump_mmap_table:751 type SHM_VASPACE va 0x3c000000..0x3dffffff pa 0x00000000..0x01ffffff size 0x02000000 (pgdir)
  81. D/TC:0 0 dump_mmap_table:751 type RES_VASPACE va 0x3e200000..0x3ebfffff pa 0x00000000..0x009fffff size 0x00a00000 (pgdir)
  82. D/TC:0 0 dump_mmap_table:751 type NSEC_SHM va 0x3ee00000..0x3effffff pa 0x3ee00000..0x3effffff size 0x00200000 (pgdir)
  83. D/TC:0 0 dump_mmap_table:751 type TEE_RAM_RX va 0x3f000000..0x3f060fff pa 0x3f000000..0x3f060fff size 0x00061000 (smallpg)
  84. D/TC:0 0 dump_mmap_table:751 type TEE_RAM_RW va 0x3f061000..0x3f1fffff pa 0x3f061000..0x3f1fffff size 0x0019f000 (smallpg)
  85. D/TC:0 0 core_mmu_entry_to_finer_grained:795 xlat tables used 1 / 5
  86. D/TC:0 0 core_mmu_entry_to_finer_grained:795 xlat tables used 2 / 5
  87. I/TC:
  88. D/TC:0 0 init_canaries:161 #Stack canaries for stack_tmp[0] with top at 0x3f0d9e38
  89. D/TC:0 0 init_canaries:161 watch *0x3f0d9e3c
  90. D/TC:0 0 init_canaries:161 #Stack canaries for stack_tmp[1] with top at 0x3f0da678
  91. D/TC:0 0 init_canaries:161 watch *0x3f0da67c
  92. D/TC:0 0 init_canaries:161 #Stack canaries for stack_tmp[2] with top at 0x3f0daeb8
  93. D/TC:0 0 init_canaries:161 watch *0x3f0daebc
  94. D/TC:0 0 init_canaries:161 #Stack canaries for stack_tmp[3] with top at 0x3f0db6f8
  95. D/TC:0 0 init_canaries:161 watch *0x3f0db6fc
  96. D/TC:0 0 init_canaries:161 #Stack canaries for stack_tmp[4] with top at 0x3f0dbf38
  97. D/TC:0 0 init_canaries:161 watch *0x3f0dbf3c
  98. D/TC:0 0 init_canaries:161 #Stack canaries for stack_tmp[5] with top at 0x3f0dc778
  99. D/TC:0 0 init_canaries:161 watch *0x3f0dc77c
  100. D/TC:0 0 init_canaries:161 #Stack canaries for stack_tmp[6] with top at 0x3f0dcfb8
  101. D/TC:0 0 init_canaries:161 watch *0x3f0dcfbc
  102. D/TC:0 0 init_canaries:161 #Stack canaries for stack_tmp[7] with top at 0x3f0dd7f8
  103. D/TC:0 0 init_canaries:161 watch *0x3f0dd7fc
  104. D/TC:0 0 init_canaries:162 #Stack canaries for stack_abt[0] with top at 0x3f0c3e38
  105. D/TC:0 0 init_canaries:162 watch *0x3f0c3e3c
  106. D/TC:0 0 init_canaries:162 #Stack canaries for stack_abt[1] with top at 0x3f0c4a78
  107. D/TC:0 0 init_canaries:162 watch *0x3f0c4a7c
  108. D/TC:0 0 init_canaries:162 #Stack canaries for stack_abt[2] with top at 0x3f0c56b8
  109. D/TC:0 0 init_canaries:162 watch *0x3f0c56bc
  110. D/TC:0 0 init_canaries:162 #Stack canaries for stack_abt[3] with top at 0x3f0c62f8
  111. D/TC:0 0 init_canaries:162 watch *0x3f0c62fc
  112. D/TC:0 0 init_canaries:162 #Stack canaries for stack_abt[4] with top at 0x3f0c6f38
  113. D/TC:0 0 init_canaries:162 watch *0x3f0c6f3c
  114. D/TC:0 0 init_canaries:162 #Stack canaries for stack_abt[5] with top at 0x3f0c7b78
  115. D/TC:0 0 init_canaries:162 watch *0x3f0c7b7c
  116. D/TC:0 0 init_canaries:162 #Stack canaries for stack_abt[6] with top at 0x3f0c87b8
  117. D/TC:0 0 init_canaries:162 watch *0x3f0c87bc
  118. D/TC:0 0 init_canaries:162 #Stack canaries for stack_abt[7] with top at 0x3f0c93f8
  119. D/TC:0 0 init_canaries:162 watch *0x3f0c93fc
  120. D/TC:0 0 init_canaries:164 #Stack canaries for stack_thread[0] with top at 0x3f0cb438
  121. D/TC:0 0 init_canaries:164 watch *0x3f0cb43c
  122. D/TC:0 0 init_canaries:164 #Stack canaries for stack_thread[1] with top at 0x3f0cd478
  123. D/TC:0 0 init_canaries:164 watch *0x3f0cd47c
  124. D/TC:0 0 init_canaries:164 #Stack canaries for stack_thread[2] with top at 0x3f0cf4b8
  125. D/TC:0 0 init_canaries:164 watch *0x3f0cf4bc
  126. D/TC:0 0 init_canaries:164 #Stack canaries for stack_thread[3] with top at 0x3f0d14f8
  127. D/TC:0 0 init_canaries:164 watch *0x3f0d14fc
  128. D/TC:0 0 init_canaries:164 #Stack canaries for stack_thread[4] with top at 0x3f0d3538
  129. D/TC:0 0 init_canaries:164 watch *0x3f0d353c
  130. D/TC:0 0 init_canaries:164 #Stack canaries for stack_thread[5] with top at 0x3f0d5578
  131. D/TC:0 0 init_canaries:164 watch *0x3f0d557c
  132. D/TC:0 0 init_canaries:164 #Stack canaries for stack_thread[6] with top at 0x3f0d75b8
  133. D/TC:0 0 init_canaries:164 watch *0x3f0d75bc
  134. D/TC:0 0 init_canaries:164 #Stack canaries for stack_thread[7] with top at 0x3f0d95f8
  135. D/TC:0 0 init_canaries:164 watch *0x3f0d95fc
  136. I/TC: OP-TEE version: 3.6.0-140-g481015de (gcc version 8.2.1 20180802 (GNU Toolchain for the A-profile Architecture 8.2-2019.01 (arm-rel-8.28))) #1 Wed Apr 1 04:51:37 UTC 2020 aarch64
  137. D/TC:0 0 check_ta_store:638 TA store: "early TA"
  138. D/TC:0 0 check_ta_store:638 TA store: "Secure Storage TA"
  139. D/TC:0 0 check_ta_store:638 TA store: "REE [buffered]"
  140. D/TC:0 0 early_ta_init:255 Early TA 023f8f1a-292a-432b-8fc4-de8471358067 size 22462 (compressed, uncompressed 38684)
  141. D/TC:0 0 mobj_mapped_shm_init:447 Shared memory address range: 3c000000, 3e000000
  142. I/TC: Initialized
  143. D/TC:0 0 init_primary_helper:1109 Primary CPU switching to normal world boot
  144. UEFI firmware (version Alpha built at 21:49:42 on Mar 31 2020)
  145.  
  146.  
  147.  
  148.  
  149.  
  150.  
  151.  
  152.  
  153.  
  154.  
  155.  
  156.  
  157.  
  158.  
  159.  
  160.  
  161.  
  162.  
  163.  
  164.  
  165.  
  166.  
  167.  
  168.  
  169.  
  170.  
  171.  
  172.  
  173.  
  174.  
  175. Press ESCAPE for boot options .EFI stub: Booting Linux Kernel...
  176. EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied
  177. EFI stub: Using DTB from configuration table
  178. Failed to handle fs_proto
  179. EFI stub: ERROR: Failed initrd from command line!
  180. EFI stub: Exiting boot services and installing virtual address map...
  181. D/TC:1 generic_boot_cpu_on_handler:1148 cpu 1: a0 0x0
  182. D/TC:1 init_secondary_helper:1133 Secondary CPU Switching to normal world boot
  183. D/TC:2 generic_boot_cpu_on_handler:1148 cpu 2: a0 0x0
  184. D/TC:2 init_secondary_helper:1133 Secondary CPU Switching to normal world boot
  185. D/TC:3 generic_boot_cpu_on_handler:1148 cpu 3: a0 0x0
  186. D/TC:3 init_secondary_helper:1133 Secondary CPU Switching to normal world boot
  187. D/TC:4 generic_boot_cpu_on_handler:1148 cpu 4: a0 0x0
  188. D/TC:4 select_vector:909 SMCCC_ARCH_WORKAROUND_1 (0x80008000) available
  189. D/TC:4 select_vector:910 SMC Workaround for CVE-2017-5715 used
  190. D/TC:4 init_secondary_helper:1133 Secondary CPU Switching to normal world boot
  191. D/TC:5 generic_boot_cpu_on_handler:1148 cpu 5: a0 0x0
  192. D/TC:5 select_vector:909 SMCCC_ARCH_WORKAROUND_1 (0x80008000) available
  193. D/TC:5 select_vector:910 SMC Workaround for CVE-2017-5715 used
  194. D/TC:5 init_secondary_helper:1133 Secondary CPU Switching to normal world boot
  195. D/TC:6 generic_boot_cpu_on_handler:1148 cpu 6: a0 0x0
  196. D/TC:6 select_vector:909 SMCCC_ARCH_WORKAROUND_1 (0x80008000) available
  197. D/TC:6 select_vector:910 SMC Workaround for CVE-2017-5715 used
  198. D/TC:6 init_secondary_helper:1133 Secondary CPU Switching to normal world boot
  199. D/TC:7 generic_boot_cpu_on_handler:1148 cpu 7: a0 0x0
  200. D/TC:7 select_vector:909 SMCCC_ARCH_WORKAROUND_1 (0x80008000) available
  201. D/TC:7 select_vector:910 SMC Workaround for CVE-2017-5715 used
  202. D/TC:7 init_secondary_helper:1133 Secondary CPU Switching to normal world boot
  203. D/TC:2 tee_entry_exchange_capabilities:101 Dynamic shared memory is enabled
  204. [ 0.000000] Booting Linux on physical CPU 0x0
  205. [ 0.000000] Linux version 4.14.140-ge18888d0b18f (mangd1ng@ubuntu) (Android (5271481 based on r349610) clang version 8.0.8 (https://android.googlesource.com/toolchain/clang 4dba9ad555eabb40b39dc53c12d09423e9faea7b) (https://android.googlesource.com/toolchain/llvm ab552995647d484a712bf15f77e6c6f4e8ac532b) (based on LLVM 8.0.8svn)) #3 SMP PREEMPT Tue Mar 31 21:48:25 PDT 2020
  206. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  207. [ 0.000000] Machine model: HiKey960
  208. [ 0.000000] efi: Getting EFI parameters from FDT:
  209. [ 0.000000] efi: EFI v2.60 by EDK II
  210. [ 0.000000] efi: MEMATTR=0xbd66aa98
  211. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000016c00000, size 64 MiB
  212. [ 0.000000] OF: reserved mem: initialized node fastboot-cma-mem, compatible id shared-dma-pool
  213. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000020c00000, size 64 MiB
  214. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  215. [ 0.000000] On node 0 totalpages: 1038903
  216. [ 0.000000] DMA zone: 14185 pages used for memmap
  217. [ 0.000000] DMA zone: 0 pages reserved
  218. [ 0.000000] DMA zone: 907831 pages, LIFO batch:31
  219. [ 0.000000] Normal zone: 2048 pages used for memmap
  220. [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
  221. [ 0.000000] psci: probing for conduit method from DT.
  222. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  223. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  224. [ 0.000000] psci: Trusted OS migration not required
  225. [ 0.000000] psci: SMC Calling Convention v1.1
  226. [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x4bc with crng_init=0
  227. [ 0.000000] percpu: Embedded 23 pages/cpu s55960 r8192 d30056 u94208
  228. [ 0.000000] pcpu-alloc: s55960 r8192 d30056 u94208 alloc=23*4096
  229. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  230. [ 0.000000] Detected VIPT I-cache on CPU0
  231. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  232. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  233. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1022670
  234. [ 0.000000] Kernel command line: androidboot.hardware=hikey960 firmware_class.path=/vendor/firmware loglevel=15 efi=noruntime overlay_mgr.overlay_dt_entry=hardware_cfg_enable_android_fstab buildvariant=userdebug console=ttyAMA6 androidboot.serialno=3BE06D8D0062652D initrd=0x7C00000,0x17FA5E
  235. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  236. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  237. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  238. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  239. [ 0.000000] software IO TLB: mapped [mem 0xdbfff000-0xdffff000] (64MB)
  240. [ 0.000000] Memory: 3839628K/4155612K available (13948K kernel code, 1376K rwdata, 4568K rodata, 3136K init, 914K bss, 184912K reserved, 131072K cma-reserved)
  241. [ 0.000000] Virtual kernel memory layout:
  242. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  243. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
  244. [ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 13952 KB)
  245. [ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 4608 KB)
  246. [ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 3136 KB)
  247. [ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 1377 KB)
  248. [ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 915 KB)
  249. [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
  250. [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
  251. [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
  252. [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08800000 ( 136 MB actual)
  253. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc220000000 ( 8704 MB)
  254. [ 0.000000] Preemptible hierarchical RCU implementation.
  255. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  256. [ 0.000000] Tasks RCU enabled.
  257. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  258. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  259. [ 0.000000] GIC: Using split EOI/Deactivate mode
  260. [ 0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (phys).
  261. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
  262. [ 0.000004] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
  263. [ 0.000093] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
  264. [ 0.000671] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
  265. [ 0.000682] pid_max: default: 32768 minimum: 301
  266. [ 0.000808] Security Framework initialized
  267. [ 0.000819] SELinux: Initializing.
  268. [ 0.000868] SELinux: Starting in permissive mode
  269. [ 0.000966] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  270. [ 0.000984] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  271. [ 0.016043] ASID allocator initialised with 32768 entries
  272. [ 0.024022] Hierarchical SRCU implementation.
  273. [ 0.032897] EFI runtime services will be disabled.
  274. [ 0.040066] smp: Bringing up secondary CPUs ...
  275. [ 0.080606] Detected VIPT I-cache on CPU1
  276. [ 0.080697] CPU1: Booted secondary processor [410fd034]
  277. [ 0.120496] Detected VIPT I-cache on CPU2
  278. [ 0.120531] CPU2: Booted secondary processor [410fd034]
  279. [ 0.160520] Detected VIPT I-cache on CPU3
  280. [ 0.160542] CPU3: Booted secondary processor [410fd034]
  281. [ 0.214335] CPU features: enabling workaround for ARM erratum 858921
  282. [ 0.214341] Detected VIPT I-cache on CPU4
  283. [ 0.214348] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
  284. [ 0.214355] CPU features: Unsupported CPU feature variation detected.
  285. [ 0.214366] arch_timer: Enabling local workaround for ARM erratum 858921
  286. [ 0.214376] arch_timer: CPU4: Trapping CNTVCT access
  287. [ 0.214381] CPU4: Booted secondary processor [410fd091]
  288. [ 0.264788] Detected VIPT I-cache on CPU5
  289. [ 0.264793] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
  290. [ 0.264803] arch_timer: Enabling local workaround for ARM erratum 858921
  291. [ 0.264808] arch_timer: CPU5: Trapping CNTVCT access
  292. [ 0.264813] CPU5: Booted secondary processor [410fd091]
  293. [ 0.316845] Detected VIPT I-cache on CPU6
  294. [ 0.316851] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
  295. [ 0.316860] arch_timer: Enabling local workaround for ARM erratum 858921
  296. [ 0.316865] arch_timer: CPU6: Trapping CNTVCT access
  297. [ 0.316869] CPU6: Booted secondary processor [410fd091]
  298. [ 0.368901] Detected VIPT I-cache on CPU7
  299. [ 0.368906] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
  300. [ 0.368915] arch_timer: Enabling local workaround for ARM erratum 858921
  301. [ 0.368920] arch_timer: CPU7: Trapping CNTVCT access
  302. [ 0.368924] CPU7: Booted secondary processor [410fd091]
  303. [ 0.368995] smp: Brought up 1 node, 8 CPUs
  304. [ 0.369046] SMP: Total of 8 processors activated.
  305. [ 0.369054] CPU features: detected feature: 32-bit EL0 Support
  306. [ 0.369058] CPU features: detected feature: Kernel page table isolation (KPTI)
  307. [ 0.372768] CPU: All CPU(s) started at EL2
  308. [ 0.372797] alternatives: patching kernel code
  309. [ 0.373085] CPU7: update max cpu_capacity 1024
  310. [ 0.379507] Registered cp15_barrier emulation handler
  311. [ 0.379520] Registered setend emulation handler
  312. [ 0.379613] CPU4: update max cpu_capacity 1024
  313. [ 0.379685] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  314. [ 0.379697] futex hash table entries: 2048 (order: 6, 262144 bytes)
  315. [ 0.381207] xor: measuring software checksum speed
  316. [ 0.420626] 8regs : 5020.000 MB/sec
  317. [ 0.460669] 8regs_prefetch: 3530.000 MB/sec
  318. [ 0.500709] 32regs : 4338.000 MB/sec
  319. [ 0.540720] 32regs_prefetch: 5334.000 MB/sec
  320. [ 0.540724] xor: using function: 32regs_prefetch (5334.000 MB/sec)
  321. [ 0.540736] pinctrl core: initialized pinctrl subsystem
  322. [ 0.541848] DMI not present or invalid.
  323. [ 0.542060] NET: Registered protocol family 16
  324. [ 0.542279] schedtune: configured to support 5 boost groups
  325. [ 0.542740] cpuidle: using governor ladder
  326. [ 0.542774] cpuidle: using governor menu
  327. [ 0.542886] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
  328. [ 0.542893] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  329. [ 0.543564] DMA: preallocated 256 KiB pool for atomic allocations
  330. [ 0.543668] Serial: AMBA PL011 UART driver
  331. [ 0.543880] pstore: using zlib compression
  332. [ 0.544239] console [pstore-1] enabled
  333. [ 0.544244] pstore: Registered ramoops as persistent store backend
  334. [ 0.544251] ramoops: attached 0x100000@0x20a00000, ecc: 0/0
  335. [ 0.566029] hi3660-mbox e896b000.mailbox: Mailbox enabled
  336. [ 0.566743] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe
  337. [ 0.566869] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe
  338. [ 0.566987] uart-pl011 fff32000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart6_pmx_func, deferring probe
  339. [ 0.592828] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  340. [ 0.660928] raid6: int64x1 gen() 1387 MB/s
  341. [ 0.728940] raid6: int64x1 xor() 766 MB/s
  342. [ 0.797012] raid6: int64x2 gen() 1660 MB/s
  343. [ 0.865073] raid6: int64x2 xor() 1001 MB/s
  344. [ 0.933107] raid6: int64x4 gen() 1850 MB/s
  345. [ 1.001156] raid6: int64x4 xor() 1096 MB/s
  346. [ 1.069205] raid6: int64x8 gen() 1736 MB/s
  347. [ 1.137251] raid6: int64x8 xor() 1039 MB/s
  348. [ 1.205308] raid6: neonx1 gen() 2035 MB/s
  349. [ 1.273355] raid6: neonx1 xor() 1918 MB/s
  350. [ 1.341412] raid6: neonx2 gen() 2975 MB/s
  351. [ 1.409470] raid6: neonx2 xor() 2708 MB/s
  352. [ 1.477517] raid6: neonx4 gen() 4112 MB/s
  353. [ 1.545570] raid6: neonx4 xor() 3619 MB/s
  354. [ 1.613628] raid6: neonx8 gen() 4428 MB/s
  355. [ 1.681678] raid6: neonx8 xor() 3452 MB/s
  356. [ 1.681683] raid6: using algorithm neonx8 gen() 4428 MB/s
  357. [ 1.681688] raid6: .... xor() 3452 MB/s, rmw enabled
  358. [ 1.681694] raid6: using neon recovery algorithm
  359. [ 1.681907] ACPI: Interpreter disabled.
  360. [ 1.682702] vgaarb: loaded
  361. [ 1.683153] SCSI subsystem initialized
  362. [ 1.683335] libata version 3.00 loaded.
  363. [ 1.683404] ssp-pl022 ffd68000.spi: could not find pctldev for node /soc/pinmux@fff11000/spi2_pmx_func, deferring probe
  364. [ 1.683427] ssp-pl022 ff3b3000.spi: could not find pctldev for node /soc/pinmux@ff3b6000/spi3_pmx_func, deferring probe
  365. [ 1.683767] usbcore: registered new interface driver usbfs
  366. [ 1.683824] usbcore: registered new interface driver hub
  367. [ 1.683914] usbcore: registered new device driver usb
  368. [ 1.683958] tcpc_class_init_1.1.1_G
  369. [ 1.684004] TCPC class init OK
  370. [ 1.684013] Init Richtek RegMap
  371. [ 1.684182] i2c_designware ffd71000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c0_pmx_func, deferring probe
  372. [ 1.684204] i2c_designware ffd72000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c1_pmx_func, deferring probe
  373. [ 1.684224] i2c_designware fdf0b000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c7_pmx_func, deferring probe
  374. [ 1.684293] Linux video capture interface: v2.00
  375. [ 1.684619] dmi: Firmware registration failed.
  376. [ 1.684628] Registered efivars operations
  377. [ 1.684699] overlay_mgr: apply hardware_cfg_enable_android_fstab dt entry
  378. [ 1.684772] overlay_mgr: overlay_0 overlay applied
  379. [ 1.685121] Advanced Linux Sound Architecture Driver Initialized.
  380. [ 1.685361] Bluetooth: Core ver 2.22
  381. [ 1.685383] NET: Registered protocol family 31
  382. [ 1.685389] Bluetooth: HCI device and connection manager initialized
  383. [ 1.685396] Bluetooth: HCI socket layer initialized
  384. [ 1.685403] Bluetooth: L2CAP socket layer initialized
  385. [ 1.685419] Bluetooth: SCO socket layer initialized
  386. [ 1.685648] NetLabel: Initializing
  387. [ 1.685655] NetLabel: domain hash size = 128
  388. [ 1.685659] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  389. [ 1.685694] NetLabel: unlabeled traffic allowed by default
  390. [ 1.685941] clocksource: Switched to clocksource arch_sys_counter
  391. [ 1.730677] VFS: Disk quotas dquot_6.6.0
  392. [ 1.730728] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  393. [ 1.730985] pnp: PnP ACPI: disabled
  394. [ 1.731747] NET: Registered protocol family 2
  395. [ 1.732047] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  396. [ 1.732168] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  397. [ 1.732451] TCP: Hash tables configured (established 32768 bind 32768)
  398. [ 1.732521] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  399. [ 1.732571] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  400. [ 1.732743] NET: Registered protocol family 1
  401. [ 1.732768] PCI: CLS 0 bytes, default 128
  402. [ 1.732902] Trying to unpack rootfs image as initramfs...
  403. [ 1.772566] Freeing initrd memory: 1532K
  404. [ 1.773418] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  405. [ 1.773740] kvm [1]: 8-bit VMID
  406. [ 1.774623] kvm [1]: vgic interrupt IRQ1
  407. [ 1.774783] kvm [1]: Hyp mode initialized successfully
  408. [ 1.777313] audit: initializing netlink subsys (disabled)
  409. [ 1.777398] audit: type=2000 audit(1.771:1): state=initialized audit_enabled=0 res=1
  410. [ 1.777609] Initialise system trusted keyrings
  411. [ 1.777693] workingset: timestamp_bits=45 max_order=20 bucket_order=0
  412. [ 1.778215] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  413. [ 1.778234] Registering sdcardfs 0.1
  414. [ 1.778354] fuse init (API version 7.26)
  415. [ 1.778544] 9p: Installing v9fs 9p2000 file system support
  416. [ 1.778685] SELinux: Registering netfilter hooks
  417. [ 1.781314] Key type asymmetric registered
  418. [ 1.781320] Asymmetric key parser 'x509' registered
  419. [ 1.781332] io scheduler noop registered
  420. [ 1.781364] io scheduler cfq registered (default)
  421. [ 1.781369] io scheduler mq-deadline registered
  422. [ 1.781373] io scheduler kyber registered
  423. [ 1.782203] pinctrl-single e896c000.pinmux: 124 pins at pa (ptrval) size 496
  424. [ 1.782487] pinctrl-single ff37e000.pinmux: 6 pins at pa (ptrval) size 24
  425. [ 1.782642] pinctrl-single ff3b6000.pinmux: 12 pins at pa (ptrval) size 48
  426. [ 1.782784] pinctrl-single ff3fd000.pinmux: 6 pins at pa (ptrval) size 24
  427. [ 1.782960] pinctrl-single fff11000.pinmux: 42 pins at pa (ptrval) size 168
  428. [ 1.783203] pinctrl-single e896c800.pinmux: 128 pins at pa (ptrval) size 512
  429. [ 1.783344] pinctrl-single ff3b6800.pinmux: 6 pins at pa (ptrval) size 24
  430. [ 1.783479] pinctrl-single ff3fd800.pinmux: 6 pins at pa (ptrval) size 24
  431. [ 1.783614] pinctrl-single ff37e800.pinmux: 6 pins at pa (ptrval) size 24
  432. [ 1.783791] pinctrl-single fff11800.pinmux: 47 pins at pa (ptrval) size 188
  433. [ 1.784293] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
  434. [ 1.784533] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
  435. [ 1.784772] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
  436. [ 1.785008] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
  437. [ 1.785254] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
  438. [ 1.785489] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
  439. [ 1.785725] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
  440. [ 1.785977] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
  441. [ 1.786220] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
  442. [ 1.786457] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
  443. [ 1.786694] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
  444. [ 1.786934] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
  445. [ 1.787182] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
  446. [ 1.787417] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
  447. [ 1.787650] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
  448. [ 1.787886] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
  449. [ 1.788109] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
  450. [ 1.788324] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
  451. [ 1.788567] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered
  452. [ 1.788799] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered
  453. [ 1.789035] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
  454. [ 1.789272] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
  455. [ 1.789518] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
  456. [ 1.789768] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
  457. [ 1.790040] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
  458. [ 1.790282] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
  459. [ 1.790521] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
  460. [ 1.790759] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
  461. [ 1.790991] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
  462. [ 1.829617] OF: PCI: host bridge /soc/pcie@f4000000 ranges:
  463. [ 1.829630] OF: PCI: MEM 0xf6000000..0xf7ffffff -> 0x00000000
  464. [ 2.835691] kirin-pcie f4000000.pcie: Link Fail
  465. [ 2.835818] kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
  466. [ 2.835828] pci_bus 0000:00: root bus resource [bus 00-01]
  467. [ 2.835836] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
  468. [ 2.835867] pci 0000:00:00.0: [19e5:3660] type 01 class 0x060400
  469. [ 2.835915] pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
  470. [ 2.836009] pci 0000:00:00.0: supports D1 D2
  471. [ 2.836015] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
  472. [ 2.836267] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-01] (conflicts with (null) [bus 00-01])
  473. [ 2.836310] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff 64bit]
  474. [ 2.836330] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  475. [ 2.836567] pcieport 0000:00:00.0: Signaling PME with IRQ 69
  476. [ 2.836738] pcieport 0000:00:00.0: AER enabled with IRQ 69
  477. [ 2.839571] k3-dma fdf30000.dma: initialized
  478. [ 2.839675] k3-dma e804b000.dma-controller: dma-avail-chan doesn't exist, considering all as available.
  479. [ 2.841526] k3-dma e804b000.dma-controller: initialized
  480. [ 2.842057] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  481. [ 2.843151] [drm] +.
  482. [ 2.843170] [drm] wait for external HDMI bridge driver.
  483. [ 2.843394] mali e82c0000.mali: Continuing without Mali regulator control
  484. [ 2.843696] mali e82c0000.mali: GPU identified as 0x0 arch 6.0.10 r0p0 status 2
  485. [ 2.844130] mali e82c0000.mali: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
  486. [ 2.844409] mali e82c0000.mali: Probed as mali0
  487. [ 2.848313] brd: module loaded
  488. [ 2.849960] Error reading temperature for gpu thermal zone: -22
  489. [ 2.851846] loop: module loaded
  490. [ 2.852081] [I/GPIO_HUB] gpio_hub_probe: step in
  491. [ 2.852239] [I/GPIO_HUB] gpio_hub_init:gpio hub init status:0
  492. [ 2.853590] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
  493. [ 2.853598] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
  494. [ 2.853605] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
  495. [ 2.853612] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
  496. [ 2.875051] scsi host0: ufshcd
  497. [ 2.886744] libphy: Fixed MDIO Bus: probed
  498. [ 2.886752] tun: Universal TUN/TAP device driver, 1.6
  499. [ 2.887002] PPP generic driver version 2.4.2
  500. [ 2.887051] PPP BSD Compression module registered
  501. [ 2.887056] PPP Deflate Compression module registered
  502. [ 2.887083] PPP MPPE Compression module registered
  503. [ 2.887089] NET: Registered protocol family 24
  504. [ 2.887094] PPTP driver version 0.8.5
  505. [ 2.887304] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  506. [ 2.887359] usbcore: registered new interface driver pegasus
  507. [ 2.887384] usbcore: registered new interface driver rtl8150
  508. [ 2.887411] usbcore: registered new interface driver r8152
  509. [ 2.887436] usbcore: registered new interface driver asix
  510. [ 2.887461] usbcore: registered new interface driver ax88179_178a
  511. [ 2.887485] usbcore: registered new interface driver cdc_ether
  512. [ 2.887507] usbcore: registered new interface driver dm9601
  513. [ 2.887533] usbcore: registered new interface driver CoreChips
  514. [ 2.887558] usbcore: registered new interface driver smsc75xx
  515. [ 2.887584] usbcore: registered new interface driver smsc95xx
  516. [ 2.887605] usbcore: registered new interface driver net1080
  517. [ 2.887628] usbcore: registered new interface driver plusb
  518. [ 2.887651] usbcore: registered new interface driver cdc_subset
  519. [ 2.887673] usbcore: registered new interface driver zaurus
  520. [ 2.887696] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  521. [ 2.887724] usbcore: registered new interface driver cdc_ncm
  522. [ 2.887940] [USB3][hisi_dwc3_probe]+
  523. [ 2.888046] [USB3][get_phy_param]eye diagram param: 0x1c466e3
  524. [ 2.888052] [USB3][get_phy_param]eye diagram host param: 0x1c466e3
  525. [ 2.888059] [USB3][get_phy_param]usb3_phy_cr_param: 0xb80
  526. [ 2.888063] [USB3][get_phy_param]usb3_phy_host_cr_param: 0x980
  527. [ 2.888068] [USB3][get_phy_param]usb3_phy_tx_vboost_lvl: 5
  528. [ 2.888088] [USB3][get_resource]this is asic platform (fpga flag 0)
  529. [ 2.888092] [USB3][create_attr_file]+
  530. [ 2.888135] [USB3][create_attr_file]-
  531. [ 2.888142] [USB3][hi3660_usb3phy_init]+
  532. [ 2.914075] [USB3][config_femtophy_param]set hs phy param 0x1c466e3 for device
  533. [ 2.914660] [USB3][config_femtophy_param]set ss phy rx equalization 0xb80
  534. [ 2.915495] [USB3][config_femtophy_param]set ss RX_SCOPE_VDCC 0x1
  535. [ 2.915502] [USB3][config_femtophy_param]set ss phy tx vboost lvl 0x5
  536. [ 2.915507] [USB3][set_hisi_dwc3_power_flag]set hisi_dwc3_power_flag 1
  537. [ 2.915511] [USB3][hi3660_usb3phy_init]-
  538. [ 2.915927] [dwc3_otg_init]+
  539. [ 2.915934] DWC3_OCFG: 0x0
  540. [ 2.915939] DWC3_OCTL: 0x40
  541. [ 2.915944] DWC3_OEVT: 0x80000000
  542. [ 2.915948] DWC3_OEVTEN: 0x0
  543. [ 2.915953] DWC3_OSTS: 0x19
  544. [ 2.915957] DWC3_BCFG: 0x0
  545. [ 2.915961] DWC3_BCEVT: 0x0
  546. [ 2.915966] DWC3_BCEVTEN: 0x0
  547. [ 2.915970] [dwc3_otg_init]-
  548. [ 2.915992] dwc3 ff100000.dwc3: dwc3_host_init if otg, otg will do device_add.
  549. [ 2.917756] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  550. [ 2.917764] [USB3][hisi_dwc3_probe]init state: OFF
  551. [ 2.917769] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  552. [ 2.917774] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  553. [ 2.917780] [USB3][hisi_usb_otg_event]event: 1
  554. [ 2.917788] [USB3][hisi_dwc3_probe]-
  555. [ 2.917791] [USB3][event_work]+
  556. [ 2.917794] [USB3][handle_event][handle_event] type: 1
  557. [ 2.917796] [dwc3_otg_work]+
  558. [ 2.917796] evt = 4
  559. [ 2.917799] [dwc3_otg_stop_peripheral]+
  560. [ 2.917809] [dwc3_otg_stop_peripheral]-
  561. [ 2.917814] [dwc3_suspend_device] +
  562. [ 2.917840] [dwc3_suspend_device] -
  563. [ 2.917845] [dwc3_otg_work]-
  564. [ 2.917850] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
  565. [ 2.917856] [USB3][handle_event]hisi usb status: DEVICE -> OFF
  566. [ 2.917860] [USB3][event_work]-
  567. [ 2.918130] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  568. [ 2.918135] ehci-pci: EHCI PCI platform driver
  569. [ 2.918166] ehci-platform: EHCI generic platform driver
  570. [ 2.918244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  571. [ 2.918255] ohci-pci: OHCI PCI platform driver
  572. [ 2.918281] ohci-platform: OHCI generic platform driver
  573. [ 2.918515] usbcore: registered new interface driver cdc_acm
  574. [ 2.918520] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  575. [ 2.918548] usbcore: registered new interface driver usb-storage
  576. [ 2.918601] usbcore: registered new interface driver usbserial
  577. [ 2.918624] usbcore: registered new interface driver usbserial_generic
  578. [ 2.918643] usbserial: USB Serial support registered for generic
  579. [ 2.918665] usbcore: registered new interface driver ftdi_sio
  580. [ 2.918682] usbserial: USB Serial support registered for FTDI USB Serial Device
  581. [ 2.918702] usbcore: registered new interface driver option
  582. [ 2.918720] usbserial: USB Serial support registered for GSM modem (1-port)
  583. [ 2.918741] usbcore: registered new interface driver pl2303
  584. [ 2.918758] usbserial: USB Serial support registered for pl2303
  585. [ 2.918781] usbcore: registered new interface driver qcserial
  586. [ 2.918798] usbserial: USB Serial support registered for Qualcomm USB modem
  587. [ 2.918822] usbcore: registered new interface driver usb_serial_simple
  588. [ 2.918840] usbserial: USB Serial support registered for carelink
  589. [ 2.918858] usbserial: USB Serial support registered for zio
  590. [ 2.918877] usbserial: USB Serial support registered for funsoft
  591. [ 2.918893] usbserial: USB Serial support registered for flashloader
  592. [ 2.918913] usbserial: USB Serial support registered for google
  593. [ 2.918931] usbserial: USB Serial support registered for libtransistor
  594. [ 2.918947] usbserial: USB Serial support registered for vivopay
  595. [ 2.918965] usbserial: USB Serial support registered for moto_modem
  596. [ 2.918982] usbserial: USB Serial support registered for motorola_tetra
  597. [ 2.919000] usbserial: USB Serial support registered for novatel_gps
  598. [ 2.919017] usbserial: USB Serial support registered for hp4x
  599. [ 2.919034] usbserial: USB Serial support registered for suunto
  600. [ 2.919053] usbserial: USB Serial support registered for siemens_mpi
  601. [ 2.919105] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
  602. [ 2.919110] [I/hisi_pd] pd_dpm_init
  603. [ 2.919171] [I/hisi_pd] pd_dpm_probe : +++++++++
  604. [ 2.919208] [I/hisi_pd] pd_dpm_probe ++++
  605. [ 2.919208]
  606. [ 2.919379] rt1711h_init (1.1.8_G): initializing...
  607. [ 2.919397] rt1711h node found...
  608. [ 2.919534] usbcore: registered new interface driver xpad
  609. [ 2.919560] usbcore: registered new interface driver usb_acecad
  610. [ 2.919584] usbcore: registered new interface driver aiptek
  611. [ 2.919610] usbcore: registered new interface driver gtco
  612. [ 2.919632] usbcore: registered new interface driver hanwang
  613. [ 2.919654] usbcore: registered new interface driver kbtab
  614. [ 2.920063] rtc-pl031 fff04000.rtc: rtc core: registered pl031 as rtc0
  615. [ 2.920192] i2c /dev entries driver
  616. [ 2.920363] IR NEC protocol handler initialized
  617. [ 2.920369] IR RC5(x/sz) protocol handler initialized
  618. [ 2.920373] IR RC6 protocol handler initialized
  619. [ 2.920378] IR JVC protocol handler initialized
  620. [ 2.920382] IR Sony protocol handler initialized
  621. [ 2.920386] IR SANYO protocol handler initialized
  622. [ 2.920391] IR Sharp protocol handler initialized
  623. [ 2.920395] IR MCE Keyboard/mouse protocol handler initialized
  624. [ 2.920400] IR XMP protocol handler initialized
  625. [ 2.921258] sp805-wdt e8a06000.watchdog: registration successful
  626. [ 2.921347] sp805-wdt e8a07000.watchdog: registration successful
  627. [ 2.921423] device-mapper: uevent: version 1.0.3
  628. [ 2.921486] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
  629. [ 2.921592] Bluetooth: HCI UART driver ver 2.3
  630. [ 2.921601] Bluetooth: HCI UART protocol H4 registered
  631. [ 2.921630] Bluetooth: HCI UART protocol LL registered
  632. [ 2.922570] sched-energy: Sched-energy-costs installed from DT
  633. [ 2.922736] WARN: cpu=4, domain=DIE: incr. energy eff 3915[0]->5078[1]
  634. [ 2.922746] WARN: cpu=0, domain=DIE: incr. energy eff 11349[0]->11636[1]
  635. [ 2.924317] sdhci: Secure Digital Host Controller Interface driver
  636. [ 2.924322] sdhci: Copyright(c) Pierre Ossman
  637. [ 2.924360] Synopsys Designware Multimedia Card Interface Driver
  638. [ 2.924946] dwmmc_k3 ff37f000.dwmmc1: 'num-slots' was deprecated.
  639. [ 2.924958] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
  640. [ 2.926026] CPU1: update max cpu_capacity 462
  641. [ 2.927259] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
  642. [ 2.927364] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
  643. [ 2.927377] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
  644. [ 2.927418] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 59,32 bit host data width,256 deep fifo
  645. [ 2.927629] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
  646. [ 2.950371] CPU7: update max cpu_capacity 1024
  647. [ 2.952463] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  648. [ 2.969644] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  649. [ 2.978582] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
  650. [ 2.978613] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  651. [ 2.980900] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  652. [ 2.981251] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  653. [ 2.981282] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  654. [ 2.981393] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 60,32 bit host data width,256 deep fifo
  655. [ 2.982220] sdhci-pltfm: SDHCI platform and OF driver helper
  656. [ 2.985807] ledtrig-cpu: registered to indicate activity on CPUs
  657. [ 2.986187] hidraw: raw HID events driver (C) Jiri Kosina
  658. [ 2.991918] usbcore: registered new interface driver usbhid
  659. [ 2.991944] usbhid: USB HID core driver
  660. [ 2.992476] ashmem: initialized
  661. [ 2.993601] hisi_ddr_devfreq ddr_devfreq: init success
  662. [ 3.002905] coresight-etm4x ecc40000.etm: CPU0: ETM v4.0 initialized
  663. [ 3.003673] coresight-etm4x ecd40000.etm: CPU1: ETM v4.0 initialized
  664. [ 3.004163] coresight-etm4x ece40000.etm: CPU2: ETM v4.0 initialized
  665. [ 3.004648] coresight-etm4x ecf40000.etm: CPU3: ETM v4.0 initialized
  666. [ 3.005139] coresight-etm4x ed440000.etm: CPU4: ETM v4.0 initialized
  667. [ 3.005617] coresight-etm4x ed540000.etm: CPU5: ETM v4.0 initialized
  668. [ 3.006136] coresight-etm4x ed640000.etm: CPU6: ETM v4.0 initialized
  669. [ 3.006757] coresight-etm4x ed740000.etm: CPU7: ETM v4.0 initialized
  670. [ 3.007294] optee: probing for conduit method from DT.
  671. [ 3.014591] optee: dynamic shared memory is enabled
  672. [ 3.014609] optee: initialized driver
  673. [ 3.015047] usbcore: registered new interface driver snd-usb-audio
  674. [ 3.017569] hisi_i2s e804f800.hisi_i2s: Registered as hisi_i2s
  675. [ 3.018139] netem: version 1.3
  676. [ 3.018159] u32 classifier
  677. [ 3.018173] Actions configured
  678. [ 3.018213] Netfilter messages via NETLINK v0.30.
  679. [ 3.018495] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  680. [ 3.018760] ctnetlink v0.93: registering with nfnetlink.
  681. [ 3.019291] xt_time: kernel timezone is -0000
  682. [ 3.019526] gre: GRE over IPv4 demultiplexor driver
  683. [ 3.019543] IPv4 over IPsec tunneling driver
  684. [ 3.020563] ip_tables: (C) 2000-2006 Netfilter Core Team
  685. [ 3.021667] arp_tables: arp_tables: (C) 2002 David S. Miller
  686. [ 3.021860] Initializing XFRM netlink socket
  687. [ 3.021920] IPsec XFRM device driver
  688. [ 3.022126] NET: Registered protocol family 10
  689. [ 3.027504] Segment Routing with IPv6
  690. [ 3.027583] mip6: Mobile IPv6
  691. [ 3.027608] ip6_tables: (C) 2000-2006 Netfilter Core Team
  692. [ 3.028959] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  693. [ 3.029990] NET: Registered protocol family 17
  694. [ 3.030020] NET: Registered protocol family 15
  695. [ 3.030078] Bridge firewalling registered
  696. [ 3.030211] Bluetooth: RFCOMM TTY layer initialized
  697. [ 3.030230] Bluetooth: RFCOMM socket layer initialized
  698. [ 3.030290] Bluetooth: RFCOMM ver 1.11
  699. [ 3.030307] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  700. [ 3.030325] Bluetooth: HIDP socket layer initialized
  701. [ 3.030371] l2tp_core: L2TP core driver, V2.0
  702. [ 3.030390] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  703. [ 3.030400] 8021q: 802.1Q VLAN Support v1.8
  704. [ 3.030816] 9pnet: Installing 9P2000 support
  705. [ 3.031568] registered taskstats version 1
  706. [ 3.031578] Loading compiled-in X.509 certificates
  707. [ 3.033134] Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
  708. [ 3.033632] Btrfs loaded, crc32c=crc32c-generic
  709. [ 3.042160] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 21, base_baud = 0) is a PL011 rev2
  710. [ 3.042829] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 22, base_baud = 0) is a PL011 rev2
  711. [ 3.042951] serial serial0: tty port ttyAMA4 registered
  712. [ 3.043252] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 23, base_baud = 0) is a PL011 rev2
  713. [ 3.043769] uart-pl011 fdf01000.serial: DMA channel TX dma0chan7
  714. [ 3.047685] console [ttyAMA6] enabled
  715. [ 3.080970] uart-pl011 fdf01000.serial: DMA channel RX dma0chan6
  716. [ 3.086089] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
  717. [ 3.091643] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2
  718. [ 3.093790] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to (ptrval)
  719. [ 3.097340] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db
  720. [ 3.101068] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
  721. [ 3.109068] ufs flash device must set VS_DebugSaveConfigTime 0x10
  722. [ 3.118118] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
  723. [ 3.127991] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1
  724. [ 3.133733] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to (ptrval)
  725. [ 3.137685] ufshcd-hi3660 ff3b0000.ufs: TX_EQUALIZER DB value lane1 = 0x1
  726. [ 3.142566] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
  727. [ 3.146516] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
  728. [ 3.152611] rt1711_i2c_probe
  729. [ 3.156497] ufshcd-hi3660 ff3b0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
  730. [ 3.161557] I2C functionality : OK...
  731. [ 3.206703] rt_parse_dt
  732. [ 3.214495] scsi 0:0:0:49488: Well-known LUN SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
  733. [ 3.217216] rt1711h_chipID = 0x2171
  734. [ 3.224967] scsi 0:0:0:49456: Well-known LUN SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
  735. [ 3.225118] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2
  736. [ 3.225123] hci-ti serial0-0: Falling back to user helper
  737. [ 3.229916] regmap_device_register: name = rt1711-4e
  738. [ 3.229960] rt_regmap_rt1711-4e: rt register cache data init
  739. [ 3.238338] scsi 0:0:0:49476: Well-known LUN SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
  740. [ 3.262542] rt_regmap_rt1711-4e: cache cata init successfully
  741. [ 3.262628] tcpc_device_register register tcpc device (type_c_port0)
  742. [ 3.270910] scsi 0:0:0:0: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
  743. [ 3.275828] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
  744. [ 3.284434] scsi 0:0:0:1: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
  745. [ 3.284768] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  746. [ 3.284836] sd 0:0:0:0: [sda] Write Protect is off
  747. [ 3.284841] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
  748. [ 3.284965] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  749. [ 3.285028] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
  750. [ 3.287068] sd 0:0:0:0: [sda] Attached SCSI disk
  751. [ 3.289108] PD Timer number = 37
  752. [ 3.289566] tcpci_timer_init : init OK
  753. [ 3.296287] scsi 0:0:0:2: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
  754. [ 3.296708] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  755. [ 3.296776] sd 0:0:0:1: [sdb] Write Protect is off
  756. [ 3.296779] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
  757. [ 3.296905] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  758. [ 3.296971] sd 0:0:0:1: [sdb] Optimal transfer size 524288 bytes
  759. [ 3.298902] sd 0:0:0:1: [sdb] Attached SCSI disk
  760. [ 3.310105] pd_parse_pdata
  761. [ 3.314415] scsi 0:0:0:3: Direct-Access SKhynix H28U62301AMR H109 PQ: 0 ANSI: 6
  762. [ 3.314976] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
  763. [ 3.315044] sd 0:0:0:2: [sdc] Write Protect is off
  764. [ 3.315048] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
  765. [ 3.315228] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
  766. [ 3.315294] sd 0:0:0:2: [sdc] Optimal transfer size 524288 bytes
  767. [ 3.316950] Alternate GPT is invalid, using primary GPT.
  768. [ 3.316956] sdc: sdc1
  769. [ 3.317792] sd 0:0:0:2: [sdc] Attached SCSI disk
  770. [ 3.321141] pd_parse_pdata src pdo data =
  771. [ 3.328812] random: fast init done
  772. [ 3.335741] pd_parse_pdata 0: 0x00019064
  773. [ 3.343855] sd 0:0:0:3: [sdd] 7805952 4096-byte logical blocks: (32.0 GB/29.8 GiB)
  774. [ 3.350355] pd_parse_pdata snk pdo data =
  775. [ 3.350357] pd_parse_pdata 0: 0x000190c8
  776. [ 3.350358] pd_parse_pdata 1: 0x0002d0c8
  777. [ 3.350361] pd_parse_pdata id vdos data =
  778. [ 3.350362] pd_parse_pdata 0: 0xd00029cf
  779. [ 3.350364] pd_parse_pdata 1: 0x00000000
  780. [ 3.350364] pd_parse_pdata 2: 0x00010000
  781. [ 3.350367] dpm_caps: local_dr_power
  782. [ 3.350372] dpm_caps: local_dr_data
  783. [ 3.357818] sd 0:0:0:3: [sdd] Write Protect is off
  784. [ 3.364987] dpm_caps: local_ext_power
  785. [ 3.364989] dpm_caps: local_usb_comm
  786. [ 3.364990] dpm_caps: local_usb_suspend
  787. [ 3.364991] dpm_caps: local_high_cap
  788. [ 3.364992] dpm_caps: local_give_back
  789. [ 3.364993] dpm_caps: local_no_suspend
  790. [ 3.364994] dpm_caps: local_vconn_supply
  791. [ 3.364995] dpm_caps: attemp_discover_cable_dfp
  792. [ 3.364996] dpm_caps: attemp_enter_dp_mode
  793. [ 3.364997] dpm_caps: attemp_discover_cable
  794. [ 3.364998] dpm_caps: attemp_discover_id
  795. [ 3.364999] dpm_caps: pr_reject_as_source
  796. [ 3.365000] dpm_caps: pr_reject_as_sink
  797. [ 3.365001] dpm_caps: pr_check_gp_source
  798. [ 3.365002] dpm_caps: pr_check_gp_sink
  799. [ 3.365003] dpm_caps: dr_reject_as_dfp
  800. [ 3.365004] dpm_caps: dr_reject_as_ufp
  801. [ 3.365005] dpm_caps: snk_prefer_low_voltage
  802. [ 3.365006] dpm_caps: snk_ignore_mismatch_current
  803. [ 3.365007] dpm_caps = 0xc010c10b
  804. [ 3.365009] [I/hisi_pd] PE:pd_core_init
  805. [ 3.387988] rt1711_init_alert name = type_c_port0
  806. [ 3.395746] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
  807. [ 3.403019] rt1711_init_alert gpio # = 291
  808. [ 3.403037] GPIO requested...
  809. [ 3.408490] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
  810. [ 3.414554] rt1711_init_alert : IRQ number = 105
  811. [ 3.417953] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes
  812. [ 3.424369] rt1711_init_alert : irq initialized...
  813. [ 3.425442] IRQF_NO_THREAD Test
  814. [ 3.437859] Alternate GPT is invalid, using primary GPT.
  815. [ 3.636772] [I/hisi_pd] TPC-I:typec_init: DRP
  816. [ 3.640611] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13
  817. [ 3.692993] [I/GPIO_HUB] gpio_hub_change_typec_power: set typec vbus gpio to 0
  818. [ 3.700248] sd 0:0:0:3: [sdd] Attached SCSI disk
  819. [ 3.702958] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  820. [ 3.702960] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  821. [ 3.702967] [E/GPIO_HUB] gpio_hub_switch_to_hub: switch to hub
  822. [ 6.606774] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:2
  823. [ 6.612522] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:2
  824. [ 6.618613] [USB3][hisi_usb_otg_event]event: 2
  825. [ 6.623063] [I/hisi_pd] TPC-I:** Unattached.SNK
  826. [ 6.623247] [USB3][event_work]+
  827. [ 6.627684] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  828. [ 6.627687] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  829. [ 6.629005] tcpc_device_irq_enable : tcpc irq enable OK!
  830. [ 6.630017] [I/hisi_pd] TPC-I:[CC_Alert] 5/0
  831. [ 6.630025] [I/hisi_pd] TPC-I:** AttachWait.SNK
  832. [ 6.630857] [USB3][handle_event][handle_event] type: 2
  833. [ 6.630861] [USB3][set_vbus_power]set port power 1
  834. [ 6.630865] [dwc3_otg_work]+
  835. [ 6.630865] evt = 2
  836. [ 6.630871] [dwc3_resume_device] +
  837. [ 6.638265] rt1711_i2c_probe probe OK!
  838. [ 6.645747] [dwc3_resume_device] -
  839. [ 6.651179] adv7511 1-0039: 1-0039 supply avdd not found, using dummy regulator
  840. [ 6.655320] [dwc3_otg_start_host]+
  841. [ 6.655470] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  842. [ 6.659977] adv7511 1-0039: 1-0039 supply dvdd not found, using dummy regulator
  843. [ 6.665081] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  844. [ 6.669879] adv7511 1-0039: 1-0039 supply pvdd not found, using dummy regulator
  845. [ 6.675915] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010
  846. [ 6.678367] adv7511 1-0039: 1-0039 supply a2vdd not found, using dummy regulator
  847. [ 6.682135] xhci-hcd xhci-hcd.0.auto: irq 102, io mem 0xff100000
  848. [ 6.685530] adv7511 1-0039: 1-0039 supply v3p3 not found, using dummy regulator
  849. [ 6.692962] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  850. [ 6.709378] [drm] +.
  851. [ 6.716692] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  852. [ 6.724203] [drm] +.
  853. [ 6.733392] usb usb1: Product: xHCI Host Controller
  854. [ 6.740925] [drm] +.
  855. [ 6.746772] usb usb1: Manufacturer: Linux 4.14.140-ge18888d0b18f xhci-hcd
  856. [ 6.746775] usb usb1: SerialNumber: xhci-hcd.0.auto
  857. [ 6.746915] hub 1-0:1.0: USB hub found
  858. [ 6.750301] [I/hisi_pd] TPC-I:[CC_Change] 5/0
  859. [ 6.750310] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  860. [ 6.750317] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  861. [ 6.750332] [I/GPIO_HUB] gpio_hub_power_off: gpio hub hub vbus no power set success
  862. [ 6.750343] [I/GPIO_HUB] gpio_hub_change_typec_power: typec power no change
  863. [ 6.750351] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:3
  864. [ 6.750358] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:3
  865. [ 6.750366] [USB3][hisi_usb_otg_event]event: 3
  866. [ 6.750397] [E/GPIO_HUB] gpio_hub_switch_to_typec: switch to typec
  867. [ 6.750404] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:0
  868. [ 6.750411] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:0
  869. [ 6.750418] [USB3][hisi_usb_otg_event]event: 0
  870. [ 6.750424] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  871. [ 6.750433] [USB3][hisi_usb_otg_event]schedule event_work wait:0]
  872. [ 6.750440] [I/hisi_pd] TPC-I:** Attached.SNK
  873. [ 6.750446] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  874. [ 6.750452] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  875. [ 6.751207] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  876. [ 6.751218] [I/hisi_pd] pd_dpm_report_pd_sink_vbus : Sink 5000 mV, 500 mA
  877. [ 6.751226] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
  878. [ 6.751232] [I/hisi_pd] TPC-I:Attached-> SINK
  879. [ 6.751239] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=7,+++
  880. [ 6.751246] [I/hisi_pd] pd_dpm_set_typec_state = 2
  881. [ 6.751254] [I/hisi_pd] pd_dpm_set_cc_orientation cc_orientation =0
  882. [ 6.751278] [I/hisi_pd] [TCPC-I]usb_port_attached
  883. [ 6.751326] [I/hisi_pd] pd_dpm_report_device_attach
  884. [ 6.754106] [drm] +.
  885. [ 6.761090] hub 1-0:1.0: 1 port detected
  886. [ 6.763254] [drm] dss irq = 68.
  887. [ 6.770543] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  888. [ 6.772658] [drm] dss_pri_clk:[400000000]->[400000000].
  889. [ 6.777532] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  890. [ 6.779782] [drm] dss_pxl0_clk:[144000000]->[144000000].
  891. [ 6.786525] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  892. [ 6.791381] [drm] -.
  893. [ 6.795133] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  894. [ 6.799547] [drm] +.
  895. [ 6.799655] [drm] host attach, client name=[adv7533], id=0
  896. [ 6.807034] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  897. [ 6.814904] [drm] -.
  898. [ 6.822021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  899. [ 6.828991] kirin-drm e8600000.dpe: bound e8601000.dsi (ops dsi_ops)
  900. [ 6.834723] usb usb2: Product: xHCI Host Controller
  901. [ 6.840816] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  902. [ 6.840817] [drm] No driver support for vblank timestamp query.
  903. [ 6.841764] [drm] cma_init!!!!!!
  904. [ 6.845261] usb usb2: Manufacturer: Linux 4.14.140-ge18888d0b18f xhci-hcd
  905. [ 6.845264] usb usb2: SerialNumber: xhci-hcd.0.auto
  906. [ 6.851448] [drm] -.
  907. [ 6.857340] hub 2-0:1.0: USB hub found
  908. [ 6.863511] [drm] Initialized kirin 1.0.0 20170309 for e8600000.dpe on minor 0
  909. [ 6.867920] hub 2-0:1.0: 1 port detected
  910. [ 6.873088] [drm] Initialized kirin 1.0.0 20170309 on minor 0
  911. [ 6.879280] [dwc3_otg_start_host]-
  912. [ 6.883616] [drm] -.
  913. [ 6.891011] [dwc3_otg_work]-
  914. [ 6.898399] [drm] -.
  915. [ 6.904236] [USB3][handle_event]hisi usb_status: OFF -> HOST
  916. [ 6.911473] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
  917. [ 6.918770] [USB3][handle_event][handle_event] type: 3
  918. [ 6.923213] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  919. [ 6.929037] [USB3][set_vbus_power]set port power 0
  920. [ 6.935922] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  921. [ 6.940083] [I/hisi_pd] pd_dpm_report_bc12 : PD_WAKE_UNLOCK
  922. [ 6.944925] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  923. [ 6.949918] [I/hisi_pd] pd_dpm_report_bc12 : event (4)
  924. [ 6.952099] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  925. [ 6.956013] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
  926. [ 6.959154] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 60,32 bit host data width,128 deep fifo
  927. [ 6.964632] [dwc3_otg_work]+
  928. [ 6.964632] evt = 1
  929. [ 6.969941] mmc_host mmc1: card is non-removable.
  930. [ 6.977506] [dwc3_otg_stop_host]+
  931. [ 7.084195] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  932. [ 7.085167] xhci-hcd xhci-hcd.0.auto: remove, state 4
  933. [ 7.106409] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: no source widget found for Playback
  934. [ 7.107700] usb usb2: USB disconnect, device number 1
  935. [ 7.112840] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: Failed to add route Playback -> direct -> TX
  936. [ 7.123185] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
  937. [ 7.126800] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
  938. [ 7.126807] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
  939. [ 7.127089] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
  940. [ 7.127098] Pending event is same --> ignore this event 2
  941. [ 7.127234] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  942. [ 7.127858] hisi_i2s e804f800.hisi_i2s: Failed to get DMA channel capabilities, falling back to period counting: -6
  943. [ 7.134422] xhci-hcd xhci-hcd.0.auto: remove, state 4
  944. [ 7.140037] asoc-simple-card soc:sound: i2s-hifi <-> e804f800.hisi_i2s mapping ok
  945. [ 7.146353] usb usb1: USB disconnect, device number 1
  946. [ 7.151510] asoc-simple-card soc:sound: ASoC: no DMI vendor name!
  947. [ 7.157129] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
  948. [ 7.165323] otg_wakelock_init: No USB transceiver found
  949. [ 7.170759] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
  950. [ 7.173884] [dwc3_otg_stop_host]-
  951. [ 7.173885] [dwc3_suspend_device] +
  952. [ 7.173910] [dwc3_suspend_device] -
  953. [ 7.180058] input: keys as /devices/platform/keys/input/input0
  954. [ 7.181941] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  955. [ 7.183668] [dwc3_otg_work]-
  956. [ 7.183670] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
  957. [ 7.183673] [USB3][handle_event]hiusb_status: HOST -> OFF
  958. [ 7.183675] [USB3][handle_event][handle_event] type: 0
  959. [ 7.184797] mmc1: new SDIO card at address 0001
  960. [ 7.196276] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13)
  961. [ 7.202711] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
  962. [ 7.210836] ALSA device list:
  963. [ 7.215104] wl18xx_driver wl18xx.0.auto: Falling back to user helper
  964. [ 7.389894] #0: hikey-hdmi
  965. [ 7.393282] uart-pl011 fff32000.serial: no DMA platform data
  966. [ 7.400338] Freeing unused kernel memory: 3136K
  967. [ 7.409792] init: init first stage started!
  968. [ 7.414054] init: Using Android DT directory /proc/device-tree/firmware/android/
  969. [ 7.422252] init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
  970. [ 7.460836] EXT4-fs (sdd10): mounted filesystem without journal. Opts: (null)
  971. [ 7.468092] init: [libfs_mgr]__mount(source=/dev/block/platform/soc/ff3b0000.ufs/by-name/system,target=/system,type=ext4)=0: Success
  972. [ 7.481825] EXT4-fs (sdd11): mounted filesystem without journal. Opts: (null)
  973. [ 7.489140] init: [libfs_mgr]__mount(source=/dev/block/platform/soc/ff3b0000.ufs/by-name/vendor,target=/vendor,type=ext4)=0: Success
  974. [ 7.501252] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
  975. [ 7.501985] [USB3][detect_charger_type]DCD done
  976. [ 7.508110] init: Loading SELinux policy
  977. [ 7.527189] SELinux: 8192 avtab hash slots, 17295 rules.
  978. [ 7.537191] SELinux: 8192 avtab hash slots, 17295 rules.
  979. [ 7.538464] [USB3][detect_charger_type]Primary Detection done
  980. [ 7.542523] SELinux: 1 users, 4 roles, 1263 types, 0 bools
  981. [ 7.548283] [USB3][detect_charger_type]Secondary Detection done
  982. [ 7.559777] , 1 sens, 1024 cats
  983. [ 7.562918] SELinux: 93 classes, 17295 rules
  984. [ 7.568238] SELinux: Class process2 not defined in policy.
  985. [ 7.574090] SELinux: Class infiniband_pkey not defined in policy.
  986. [ 7.574185] [USB3][detect_charger_type]type: 0
  987. [ 7.580267] SELinux: Class infiniband_endport not defined in policy.
  988. [ 7.580272] SELinux: the above unknown classes and permissions will be denied
  989. [ 7.580282] SELinux: policy capability network_peer_controls=1
  990. [ 7.584744] [I/hisi_pd] pd_dpm_report_bc12 : event (0)
  991. [ 7.591162] SELinux: policy capability open_perms=1
  992. [ 7.591164] SELinux: policy capability extended_socket_class=1
  993. [ 7.591165] SELinux: policy capability always_check_network=0
  994. [ 7.591166] SELinux: policy capability cgroup_seclabel=0
  995. [ 7.591167] SELinux: policy capability nnp_nosuid_transition=0
  996. [ 7.591168] SELinux: Completing initialization.
  997. [ 7.591169] SELinux: Setting up existing superblocks.
  998. [ 7.647317] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
  999. [ 7.655073] [dwc3_otg_work]+
  1000. [ 7.655073] evt = 3
  1001. [ 7.655077] [dwc3_resume_device] +
  1002. [ 7.664075] [dwc3_resume_device] -
  1003. [ 7.665580] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
  1004. [ 7.665580]
  1005. [ 7.666272] audit: type=1403 audit(13.971:2): policy loaded auid=4294967295 ses=4294967295
  1006. [ 7.667504] [dwc3_otg_start_peripheral]+
  1007. [ 7.677733] audit: type=1404 audit(13.983:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  1008. [ 7.685458] [dwc3_otg_start_peripheral]-
  1009. [ 7.685467] [dwc3_otg_work]-
  1010. [ 7.704865] selinux: SELinux: Loaded file_contexts
  1011. [ 7.704865]
  1012. [ 7.705683] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  1013. [ 7.712914] random: init: uninitialized urandom read (40 bytes read)
  1014. [ 7.717240] [USB3][handle_event]hisi usb status: OFF -> DEVICE
  1015. [ 7.717241] [USB3][event_work]-
  1016. [ 7.717244] [USB3][event_work]+
  1017. [ 7.717245] [USB3][event_work]-
  1018. [ 7.740722] init: init second stage started!
  1019. [ 7.750021] init: Using Android DT directory /proc/device-tree/firmware/android/
  1020. [ 7.758764] selinux: SELinux: Loaded file_contexts
  1021. [ 7.758764]
  1022. [ 7.765070] init: Running restorecon...
  1023. [ 7.774379] init: waitid failed: No child processes
  1024. [ 7.782169] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
  1025. [ 7.795585] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
  1026. [ 7.805300] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 1892
  1027. [ 7.808428] random: init: uninitialized urandom read (40 bytes read)
  1028. [ 7.813593] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 1893
  1029. [ 7.817001] random: init: uninitialized urandom read (40 bytes read)
  1030. [ 7.832025] init: Parsing file /init.rc...
  1031. [ 7.855398] audit: type=1400 audit(14.163:4): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
  1032. [ 7.859874] ueventd: ueventd started!
  1033. [ 7.872397] audit: type=1400 audit(14.163:5): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
  1034. [ 7.877296] selinux: SELinux: Loaded file_contexts
  1035. [ 7.877296]
  1036. [ 7.892953] audit: type=1400 audit(14.163:6): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
  1037. [ 7.899257] ueventd: Parsing file /ueventd.rc...
  1038. [ 7.916118] audit: type=1400 audit(14.163:7): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
  1039. [ 7.921466] ueventd: Parsing file /vendor/ueventd.rc...
  1040. [ 7.943480] ueventd: Parsing file /odm/ueventd.rc...
  1041. [ 7.948479] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
  1042. [ 7.958319] ueventd: Parsing file /ueventd.hikey960.rc...
  1043. [ 7.963764] ueventd: Unable to read config file '/ueventd.hikey960.rc': open() failed: No such file or directory
  1044. [ 7.975790] ueventd: Parsing file /vendor/lib/modules/modules.alias...
  1045. [ 7.982350] ueventd: Unable to read config file '/vendor/lib/modules/modules.alias': open() failed: No such file or directory
  1046. [ 8.013491] Bluetooth: hci0: change remote baud rate command in firmware
  1047. [ 8.106288] Registered swp emulation handler
  1048. [ 8.117483] audit: type=1400 audit(14.423:8): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
  1049. [ 8.121668] watchdogd: watchdogd started (interval 10, margin 20)!
  1050. [ 8.134451] audit: type=1400 audit(14.423:9): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
  1051. [ 8.140746] EXT4-fs (sdd5): Ignoring removed nomblk_io_submit option
  1052. [ 8.157721] audit: type=1400 audit(14.423:10): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
  1053. [ 8.170095] EXT4-fs (sdd5): recovery complete
  1054. [ 8.181105] audit: type=1400 audit(14.423:11): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
  1055. [ 8.186151] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  1056. [ 8.284776] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
  1057. [ 8.284776]
  1058. [ 8.290948] e2fsck: /system/bin/e2fsck: Permission denied while trying to open /dev/block/sdd5
  1059. [ 8.290948]
  1060. [ 8.301069] e2fsck:
  1061. [ 8.301069]
  1062. [ 8.304797] e2fsck: You must have r/w access to the filesystem or be root
  1063. [ 8.304797]
  1064. [ 8.313145] e2fsck: e2fsck terminated by exit(8)
  1065. [ 8.313145]
  1066. [ 8.326413] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,barrier=1
  1067. [ 8.343478] EXT4-fs (sdd13): Ignoring removed nomblk_io_submit option
  1068. [ 8.355889] EXT4-fs (sdd13): recovery complete
  1069. [ 8.363310] EXT4-fs (sdd13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  1070. [ 8.414503] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
  1071. [ 8.414503]
  1072. [ 8.420717] e2fsck: /system/bin/e2fsck: Permission denied while trying to open /dev/block/sdd13
  1073. [ 8.420717]
  1074. [ 8.431135] e2fsck:
  1075. [ 8.431135]
  1076. [ 8.434904] e2fsck: You must have r/w access to the filesystem or be root
  1077. [ 8.434904]
  1078. [ 8.443335] e2fsck: e2fsck terminated by exit(8)
  1079. [ 8.443335]
  1080. [ 8.490129] EXT4-fs (sdd13): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,barrier=1
  1081. [ 8.505624] init: 5 output lines suppressed due to ratelimiting
  1082. [ 8.558909] logd.auditd: start
  1083. [ 8.562076] logd.klogd: 8560114581
  1084. [ 11.830303] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
  1085. [ 11.836302] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
  1086. [ 11.842615] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
  1087. [ 11.848501] Pending event is same --> ignore this event 2
  1088. [ 11.854120] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  1089. [ 13.550712] init: wait for '/persist/tee' timed out and took 5007ms
  1090. [ 13.557721] init: Command 'wait /persist/tee' action=post-fs (/vendor/etc/init/init.hikey960.rc:147) took 5014ms and failed: wait_for_file() failed
  1091. [ 13.573185] init: starting service 'tee-supplicant'...
  1092. [ 13.579547] type=1400 audit(19.887:50): avc: denied { dac_read_search } for pid=1 comm="init" capability=2 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0
  1093. [ 13.597437] init: starting service 'vendor.keymaster-3-0-optee'...
  1094. [ 13.604763] init: Service 'tee-supplicant' (pid 2433) exited with status 0
  1095. [ 13.611907] init: processing action (late-fs) from (/init.rc:376)
  1096. [ 13.618128] init: processing action (late-fs) from (/vendor/etc/init/init.hikey960.rc:152)
  1097. [ 13.627028] init: starting service 'wait_for_keymaster_optee'...
  1098. [ 13.633405] audit_log_lost: 38 callbacks suppressed
  1099. [ 13.633407] audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64
  1100. [ 13.645104] audit: rate limit exceeded
  1101. [ 13.649227] init: SVC_EXEC pid 2437 (uid 0 gid 0+1 context default) started; waiting...
  1102. D/TC:? 0 tee_ta_init_pseudo_ta_session:280 Lookup pseudo TA dba51a17-0563-11e7-93b1-6fa7b0071a51
  1103. D/TC:? 0 load_ldelf:707 ldelf load address 0x40006000
  1104. D/LD: ldelf:134 Loading TA dba51a17-0563-11e7-93b1-6fa7b0071a51
  1105. D/TC:? 0 tee_ta_init_pseudo_ta_session:280 Lookup pseudo TA 3a2f8978-5dc0-11e8-9c2d-fa7ae01bbebc
  1106. D/TC:? 0 tee_ta_init_pseudo_ta_session:293 Open system.pta
  1107. D/TC:? 0 tee_ta_init_pseudo_ta_session:307 system.pta : 3a2f8978-5dc0-11e8-9c2d-fa1ae01b0ebc
  1108. ait_for_keymaster_optee: Waiting for Keymaster device
  1109. D/TC:? 0 system_open_ta_binary:239 Lookup user TA ELF dba51a17-0563-11e7-93b1-6fa7b0071a51 (early TA)
  1110. D/TC:? 0 system_open_ta_binary:242 res=0xffff0008
  1111. D/TC:? 0 system_open_ta_binary:239 Lookup user TA ELF[ d b a153.7772563 1ni7- 3bceivedb0on1aol (essure Stntegface)start' for 'android.hardware.keymaster@3.0::IKeymasterDevice/default' from pid: 2421 (/system/bin/hwservicemanager)
  1112. [ 13.737795] init: Received control message 'interface_start' for 'android.hardware.keymaster@3.0::IKeymasterDevice/default' from pid: 2421 (/system/bin/hwservicemanager)
  1113. D/TC:? 0 system_open_ta_binary:242 res=0xf0100003
  1114. D/TC:? 0 system_open_ta_binary:239 Lookup user TA ELF dba51a17-0563-11e7-93b1-6fa7b0071a51 (REE [buffered])
  1115. D/TC:? 0 system_open_ta_binary:242 res=0x0
  1116. D/LD: ldelf:169 ELF (dba51a17-0563-11e7-93b1-6fa7b0071a51) at 0x40054000
  1117. D/TC:? 0 tee_ta_close_session:498 csess 0x3f0a22e0 id 1
  1118. D/TC:? 0 tee_ta_close_session:517 Destroy session
  1119. D/TA: TA_CreateEntryPoint:50 TA_CreateEntryPoint 50
  1120. D/TA: TA_create_secret_key:98 TA_create_secret_key 98
  1121. E/TA: TA_create_secret_key:140 Failed to open secret key, res=f0100003
  1122. E/TA: TA_CreateEntryPoint:56 Something wrong with secret key (f0100003)
  1123. D/TC:? 0 tee_ta_close_session:498 csess 0x3f0a2b00 id 1
  1124. D/TC:? 0 tee_ta_close_session:517 Destroy session
  1125. D/TC:? 0 destroy_context:297 Destroy TA ctx (0x3f0a2aa0)
  1126. E/TC:? 0 tee_ta_open_session:727 Failed. Return error 0xf0100003
  1127. [ 14.720857] ServiceManagement: Waited one second for android.hardware.keymaster@3.0::IKeymasterDevice/default. Waiting another...
  1128. [ 15.734279] ServiceManagement: Waited one second for android.hardware.keymaster@3.0::IKeymasterDevice/default. Waiting another...
  1129. [ 16.563171] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
  1130. [ 16.569094] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
  1131. [ 16.575325] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
  1132. [ 16.581205] Pending event is same --> ignore this event 2
  1133. [ 16.586825] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  1134. [ 16.746420] ServiceManagement: Waited one second for android.hardware.keymaster@3.0::IKeymasterDevice/default. Waiting another...
  1135. [ 17.758860] ServiceManagement: Waited one second for android.hardware.keymaster@3.0::IKeymasterDevice/default. Waiting another...
  1136. [ 18.771284] ServiceManagement: Waited one second for android.hardware.keymaster@3.0::IKeymasterDevice/default. Waiting another...
  1137. [ 19.785500] ServiceManagement: Waited one second for android.hardware.keymaster@3.0::IKeymasterDevice/default. Waiting another...
  1138. [ 20.798209] ServiceManagement: Waited one second for android.hardware.keymaster@3.0::IKeymasterDevice/default. Waiting another...
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!