genBTC

ethtool BE2NET Emulex OCe11xxx

Feb 1st, 2021 (edited)
71
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 2.60 KB | None | 0 0
  1. # ethtool enp5s0f0
  2. Settings for enp5s0f0:
  3. Supported ports: [ FIBRE ]
  4. Supported link modes: 1000baseT/Full
  5. 10000baseT/Full
  6. Supported pause frame use: Symmetric
  7. Supports auto-negotiation: No
  8. Supported FEC modes: Not reported
  9. Advertised link modes: Not reported
  10. Advertised pause frame use: No
  11. Advertised auto-negotiation: No
  12. Advertised FEC modes: Not reported
  13. Speed: 10000Mb/s
  14. Duplex: Full
  15. Port: Direct Attach Copper
  16. PHYAD: 0
  17. Transceiver: internal
  18. Auto-negotiation: off
  19. Supports Wake-on: d
  20. Wake-on: d
  21. Current message level: 0x00002000 (8192)
  22. hw
  23. Link detected: yes
  24.  
  25. # ethtool -i enp5s0f0
  26. driver: be2net
  27. version: 12.0.0.0
  28. firmware-version: 10.2.261.36
  29. expansion-rom-version:
  30. bus-info: 0000:05:00.0
  31. supports-statistics: yes
  32. supports-test: yes
  33. supports-eeprom-access: yes
  34. supports-register-dump: no
  35. supports-priv-flags: yes
  36.  
  37. # ethtool -k enp5s0f0
  38. Features for enp5s0f0:
  39. rx-checksumming: on
  40. tx-checksumming: on
  41. tx-checksum-ipv4: on
  42. tx-checksum-ip-generic: off [fixed]
  43. tx-checksum-ipv6: on
  44. tx-checksum-fcoe-crc: off [fixed]
  45. tx-checksum-sctp: off [fixed]
  46. scatter-gather: on
  47. tx-scatter-gather: on
  48. tx-scatter-gather-fraglist: off [fixed]
  49. tcp-segmentation-offload: on
  50. tx-tcp-segmentation: on
  51. tx-tcp-ecn-segmentation: off [fixed]
  52. tx-tcp-mangleid-segmentation: off
  53. tx-tcp6-segmentation: on
  54. udp-fragmentation-offload: off
  55. generic-segmentation-offload: on
  56. generic-receive-offload: on
  57. large-receive-offload: off [fixed]
  58. rx-vlan-offload: on [fixed]
  59. tx-vlan-offload: on
  60. ntuple-filters: off [fixed]
  61. receive-hashing: on
  62. highdma: on [fixed]
  63. rx-vlan-filter: on [fixed]
  64. vlan-challenged: off [fixed]
  65. tx-lockless: off [fixed]
  66. netns-local: off [fixed]
  67. tx-gso-robust: off [fixed]
  68. tx-fcoe-segmentation: off [fixed]
  69. tx-gre-segmentation: off [fixed]
  70. tx-gre-csum-segmentation: off [fixed]
  71. tx-ipxip4-segmentation: off [fixed]
  72. tx-ipxip6-segmentation: off [fixed]
  73. tx-udp_tnl-segmentation: on
  74. tx-udp_tnl-csum-segmentation: off [fixed]
  75. tx-gso-partial: off [fixed]
  76. tx-sctp-segmentation: off [fixed]
  77. tx-esp-segmentation: off [fixed]
  78. tx-udp-segmentation: off [fixed]
  79. fcoe-mtu: off [fixed]
  80. tx-nocache-copy: off
  81. loopback: off [fixed]
  82. rx-fcs: off [fixed]
  83. rx-all: off [fixed]
  84. tx-vlan-stag-hw-insert: off [fixed]
  85. rx-vlan-stag-hw-parse: off [fixed]
  86. rx-vlan-stag-filter: off [fixed]
  87. l2-fwd-offload: off [fixed]
  88. hw-tc-offload: off [fixed]
  89. esp-hw-offload: off [fixed]
  90. esp-tx-csum-hw-offload: off [fixed]
  91. rx-udp_tunnel-port-offload: on
  92. tls-hw-tx-offload: off [fixed]
  93. tls-hw-rx-offload: off [fixed]
  94. rx-gro-hw: off [fixed]
  95. tls-hw-record: off [fixed]
  96.  
Add Comment
Please, Sign In to add comment