Guest User

BT Home Hub 5a OpenWRT dmesg kernel log

a guest
Mar 2nd, 2016
140
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Linux version 4.4.3 (mac@mac-desktop) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 r48830) ) #7 Tue Mar 1 09:51:32 UTC 2016
  2. [ 0.000000] SoC: xRX200 rev 1.2
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
  5. [ 0.000000] MIPS: machine is BTHOMEHUBV5A - BT Home Hub 5A
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Zone ranges:
  10. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  14. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  15. [ 0.000000] On node 0 totalpages: 32768
  16. [ 0.000000] free_area_init_node: node 0, pgdat 805241c0, node_mem_map 81009240
  17. [ 0.000000] Normal zone: 256 pages used for memmap
  18. [ 0.000000] Normal zone: 0 pages reserved
  19. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  20. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  21. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  22. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. [ 0.000000] pcpu-alloc: [0] 0
  24. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  25. [ 0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
  26. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  29. [ 0.000000] Writing ErrCtl register=00000542
  30. [ 0.000000] Readback ErrCtl register=00000542
  31. [ 0.000000] Memory: 123872K/131072K available (3975K kernel code, 308K rwdata, 1240K rodata, 220K init, 219K bss, 7200K reserved, 0K cma-reserved)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS:256
  34. [ 0.000000] CPU Clock: 500MHz
  35. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
  36. [ 0.000010] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
  37. [ 0.007856] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
  38. [ 0.042308] pid_max: default: 32768 minimum: 301
  39. [ 0.047150] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  40. [ 0.053717] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.066673] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  42. [ 0.076464] pinctrl core: initialized pinctrl subsystem
  43. [ 0.082309] NET: Registered protocol family 16
  44. [ 0.091409] pinctrl-xway 1e100b10.pinmux: Init done
  45. [ 0.096908] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
  46. [ 0.206891] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
  47. [ 0.221793] PCI host bridge /fpi@10000000/pci@E105400 ranges:
  48. [ 0.227431] MEM 0x0000000018000000..0x0000000019ffffff
  49. [ 0.232692] IO 0x000000001ae00000..0x000000001affffff
  50. [ 0.356111] ath9k,eeprom ath9k_eep: failed to load eeprom address
  51. [ 0.376011] usbcore: registered new interface driver usbfs
  52. [ 0.381499] usbcore: registered new interface driver hub
  53. [ 0.386858] usbcore: registered new device driver usb
  54. [ 0.392257] PCI host bridge to bus 0000:00
  55. [ 0.396252] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
  56. [ 0.403162] pci_bus 0000:00: root bus resource [io 0xffffffff]
  57. [ 0.409151] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  58. [ 0.416004] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  59. [ 0.424059] pci 0000:00:0e.0: [168c:ff1d] type 00 class 0x020000
  60. [ 0.424131] pci 0000:00:0e.0: reg 0x10: [mem 0x00000000-0x0000ffff]
  61. [ 0.424536] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  62. [ 0.424582] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
  63. [ 0.431439] PCI host bridge to bus 0000:01
  64. [ 0.435419] pci_bus 0000:01: root bus resource [mem 0x1c000000-0x1cffffff]
  65. [ 0.442335] pci_bus 0000:01: root bus resource [io 0x1d800000-0x1d8fffff]
  66. [ 0.449279] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
  67. [ 0.456133] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
  68. [ 0.464159] pci 0000:01:00.0: [1bef:0011] type 01 class 0x060000
  69. [ 0.464195] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
  70. [ 0.481924] pci 0000:01:00.0: PME# supported from D0 D3hot
  71. [ 0.482234] pci 0000:01:00.0: bridge configuration invalid ([bus 02-00]), reconfiguring
  72. [ 0.490351] pci 0000:02:00.0: [168c:003c] type 00 class 0x028000
  73. [ 0.490438] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  74. [ 0.490509] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  75. [ 0.490615] pci 0000:02:00.0: supports D1 D2
  76. [ 0.490906] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  77. [ 0.490946] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 02
  78. [ 0.491002] pci 0000:01:00.0: BAR 8: assigned [mem 0x1c000000-0x1c1fffff]
  79. [ 0.497684] pci 0000:01:00.0: BAR 9: assigned [mem 0x1c200000-0x1c2fffff pref]
  80. [ 0.504952] pci 0000:02:00.0: BAR 0: assigned [mem 0x1c000000-0x1c1fffff 64bit]
  81. [ 0.512350] pci 0000:02:00.0: BAR 6: assigned [mem 0x1c200000-0x1c20ffff pref]
  82. [ 0.519615] pci 0000:01:00.0: PCI bridge to [bus 02]
  83. [ 0.524649] pci 0000:01:00.0: bridge window [mem 0x1c000000-0x1c1fffff]
  84. [ 0.531504] pci 0000:01:00.0: bridge window [mem 0x1c200000-0x1c2fffff pref]
  85. [ 0.538866] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
  86. [ 0.545475] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
  87. [ 0.551817] ifx_pcie_bios_map_irq port 0 dev 0000:02:00.0 slot 0 pin 1
  88. [ 0.558484] ifx_pcie_bios_map_irq dev 0000:02:00.0 irq 144 assigned
  89. [ 0.565838] clocksource: Switched to clocksource MIPS
  90. [ 0.600010] NET: Registered protocol family 2
  91. [ 0.605189] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  92. [ 0.612075] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  93. [ 0.618453] TCP: Hash tables configured (established 1024 bind 1024)
  94. [ 0.624962] UDP hash table entries: 256 (order: 0, 4096 bytes)
  95. [ 0.630811] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  96. [ 0.637399] NET: Registered protocol family 1
  97. [ 0.641769] PCI: CLS 0 bytes, default 32
  98. [ 0.642204] gptu: totally 6 16-bit timers/counters
  99. [ 0.647021] gptu: misc_register on minor 63
  100. [ 0.651141] gptu: succeeded to request irq 126
  101. [ 0.655630] gptu: succeeded to request irq 127
  102. [ 0.660143] gptu: succeeded to request irq 128
  103. [ 0.664657] gptu: succeeded to request irq 129
  104. [ 0.669171] gptu: succeeded to request irq 130
  105. [ 0.673685] gptu: succeeded to request irq 131
  106. [ 0.679027] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a2x.bin
  107. [ 0.686292] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 79C0000
  108. [ 0.692624] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 79C0000
  109. [ 0.800149] futex hash table entries: 256 (order: -1, 3072 bytes)
  110. [ 0.832411] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  111. [ 0.838159] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  112. [ 0.851522] io scheduler noop registered
  113. [ 0.855366] io scheduler deadline registered (default)
  114. [ 0.861198] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
  115. [ 0.870104] console [ttyLTQ0] enabled
  116. [ 0.877424] bootconsole [early0] disabled
  117. [ 0.888956] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
  118. [ 0.893855] nand: AMD/Spansion S34ML01G1
  119. [ 0.897774] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  120. [ 0.905423] Scanning device for bad blocks
  121. [ 0.943819] Bad eraseblock 237 at 0x000001da0000
  122. [ 1.047206] Bad eraseblock 931 at 0x000007460000
  123. [ 1.063717] 5 ofpart partitions found on MTD device 14000000.nand-parts
  124. [ 1.068899] Creating 5 MTD partitions on "14000000.nand-parts":
  125. [ 1.074819] 0x000000000000-0x000000040000 : "u-boot"
  126. [ 1.081549] 0x000000040000-0x000000080000 : "uboot-env"
  127. [ 1.087449] 0x000000080000-0x0000000a0000 : "caldata"
  128. [ 1.093139] 0x0000000a0000-0x0000002a0000 : "kernel"
  129. [ 1.098821] 0x0000002a0000-0x000008000000 : "ubi"
  130. [ 1.207220] libphy: lantiq,xrx200-mdio: probed
  131. [ 1.282571] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:00, irq=-1)
  132. [ 1.350546] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:01, irq=-1)
  133. [ 1.418532] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
  134. [ 1.486531] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
  135. [ 1.558554] eth1: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:05, irq=-1)
  136. [ 1.565467] wdt 1f8803f0.watchdog: Init done
  137. [ 1.572177] NET: Registered protocol family 10
  138. [ 1.581377] NET: Registered protocol family 17
  139. [ 1.584540] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  140. [ 1.597050] 8021q: 802.1Q VLAN Support v1.8
  141. [ 1.605285] ath9k,eeprom ath9k_eep: pci slot: 14
  142. [ 1.608491] pci 0000:00:0e.0: fixup device configuration
  143. [ 1.615402] pci 0000:00:0e.0: fixup info: [168c:002d] revision 01 class 0x028000
  144. [ 1.621389] ath9k,eeprom ath9k_eep: loaded ath9k eeprom
  145. [ 1.630490] UBI: auto-attach mtd4
  146. [ 1.632181] ubi0: attaching mtd4
  147. [ 2.270224] ubi0: scanning is finished
  148. [ 2.311679] ubi0: attached mtd4 (name "ubi", size 125 MiB)
  149. [ 2.315767] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
  150. [ 2.322608] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
  151. [ 2.329307] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
  152. [ 2.336098] ubi0: good PEBs: 1001, bad PEBs: 2, corrupted PEBs: 0
  153. [ 2.342191] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  154. [ 2.349417] ubi0: max/mean erase counter: 611/450, WL threshold: 4096, image sequence number: 1364170043
  155. [ 2.358920] ubi0: available PEBs: 0, total reserved PEBs: 1001, PEBs reserved for bad PEB handling: 18
  156. [ 2.368405] ubi0: background thread "ubi_bgt0d" started, PID 309
  157. [ 2.480358] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 311
  158. [ 2.586799] UBIFS (ubi0:0): recovery needed
  159. [ 2.942694] UBIFS (ubi0:0): recovery completed
  160. [ 2.945784] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
  161. [ 2.953133] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  162. [ 2.963030] UBIFS (ubi0:0): FS size: 124895232 bytes (119 MiB, 968 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
  163. [ 2.973642] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
  164. [ 2.979483] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID CA4AAB1E-F81B-4423-979C-FEF2385CA1FF, small LPT model
  165. [ 2.992962] VFS: Mounted root (ubifs filesystem) on device 0:12.
  166. [ 2.998309] Freeing unused kernel memory: 220K (80569000 - 805a0000)
  167. [ 3.345295] init: Console is alive
  168. [ 3.347592] init: - watchdog -
  169. [ 4.654616] Button Hotplug driver version 0.4.1
  170. [ 4.750198] SCSI subsystem initialized
  171. [ 4.796425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  172. [ 4.803006] ehci-platform: EHCI generic platform driver
  173. [ 4.822531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  174. [ 4.828686] ohci-platform: OHCI generic platform driver
  175. [ 4.844840] uhci_hcd: USB Universal Host Controller Interface driver
  176. [ 4.852070] ohci-pci: OHCI PCI platform driver
  177. [ 4.859232] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
  178. [ 4.890657] usbcore: registered new interface driver usb-storage
  179. [ 5.371464] init: - preinit -
  180. [ 5.653402] random: procd urandom read with 29 bits of entropy available
  181. [ 8.784612] mount_root: mounting /dev/root
  182. [ 8.792493] mount_root: loading kmods from internal overlay
  183. [ 9.186314] block: attempting to load /etc/config/fstab
  184. [ 9.201404] block: extroot: not configured
  185. [ 9.214843] procd: - early -
  186. [ 9.216424] procd: - watchdog -
  187. [ 9.803754] procd: - ubus -
  188. [ 10.827548] procd: - init -
  189. [ 12.233016] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
  190. [ 12.276328] NET: Registered protocol family 8
  191. [ 12.279287] NET: Registered protocol family 20
  192. [ 12.349540] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  193. [ 12.465776] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  194. [ 12.520308] tun: Universal TUN/TAP device driver, 1.6
  195. [ 12.523965] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  196. [ 12.566103] ip6_tables: (C) 2000-2006 Netfilter Core Team
  197. [ 12.690236] nf_conntrack version 0.5.0 (1938 buckets, 7752 max)
  198. [ 12.805230] Netfilter messages via NETLINK v0.30.
  199. [ 12.822405] ip_set: protocol 6
  200. [ 13.275554] Lantiq (VRX) DSL CPE MEI driver, version 1.4.8.5, (c) 2013 Lantiq Deutschland GmbH
  201. [ 13.275554]
  202. [ 13.275554] Lantiq CPE API Driver version: DSL CPE API V4.16.6.3
  203. [ 13.395732]
  204. [ 13.395732] Predefined debug level: 3
  205. [ 13.416921] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
  206. [ 13.422933] Backport generated by backports.git backports-20151218-0-g2f58d9d
  207. [ 14.319747] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
  208. [ 14.324079] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
  209. [ 14.330188] ath10k_pci 0000:02:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0
  210. [ 14.748754] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
  211. [ 14.756625] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
  212. [ 14.772348] ath10k_pci 0000:02:00.0: firmware ver 10.2.4.97 api 5 features no-p2p crc32 f91e34f2
  213. [ 14.819975] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
  214. [ 14.829040] ath10k_pci 0000:02:00.0: Falling back to user helper
  215. [ 14.884408] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
  216. [ 14.893689] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
  217. [ 15.980378] ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
  218. [ 16.077416] ath: EEPROM regdomain: 0x833a
  219. [ 16.077439] ath: EEPROM indicates we should expect a country code
  220. [ 16.077460] ath: doing EEPROM country->regdmn map search
  221. [ 16.077475] ath: country maps to regdmn code: 0x37
  222. [ 16.077488] ath: Country alpha2 being used: GB
  223. [ 16.077499] ath: Regpair used: 0x37
  224. [ 16.284775] u32 classifier
  225. [ 16.286083] input device check on
  226. [ 16.289669] Actions configured
  227. [ 16.322528] Mirror/redirect action on
  228. [ 17.053461] usbcore: registered new interface driver carl9170
  229. [ 17.062783] usbcore: registered new interface driver cdc_wdm
  230. [ 17.076214] ip_tables: (C) 2000-2006 Netfilter Core Team
  231. [ 17.095788] Infineon Technologies DEU driver version 2.0.0
  232. [ 17.101542] IFX DEU DES initialized (multiblock).
  233. [ 17.105769] IFX DEU AES initialized (multiblock).
  234. [ 17.109973] IFX DEU ARC4 initialized (multiblock).
  235. [ 17.114555] IFX DEU SHA1 initialized.
  236. [ 17.118162] IFX DEU MD5 initialized.
  237. [ 17.121719] IFX DEU SHA1_HMAC initialized.
  238. [ 17.125820] IFX DEU MD5_HMAC initialized.
  239. [ 17.233173] usbcore: registered new interface driver rtl8187
  240. [ 17.247061] usbcore: registered new interface driver ums-alauda
  241. [ 17.254797] usbcore: registered new interface driver ums-cypress
  242. [ 17.262695] usbcore: registered new interface driver ums-datafab
  243. [ 17.270278] usbcore: registered new interface driver ums-freecom
  244. [ 17.278120] usbcore: registered new interface driver ums-isd200
  245. [ 17.286052] usbcore: registered new interface driver ums-jumpshot
  246. [ 17.294225] usbcore: registered new interface driver ums-karma
  247. [ 17.302637] usbcore: registered new interface driver ums-sddr09
  248. [ 17.310461] usbcore: registered new interface driver ums-sddr55
  249. [ 17.318654] usbcore: registered new interface driver ums-usbat
  250. [ 17.327795] usbcore: registered new interface driver usblp
  251. [ 17.379978] usbcore: registered new interface driver usbserial
  252. [ 17.384563] usbcore: registered new interface driver usbserial_generic
  253. [ 17.391070] usbserial: USB Serial support registered for generic
  254. [ 17.546931] xt_time: kernel timezone is -0000
  255. [ 17.580145] usbcore: registered new interface driver zd1211rw
  256. [ 17.608540] usbcore: registered new interface driver cdc_ncm
  257. [ 17.653085] PPP generic driver version 2.4.2
  258. [ 17.659615] NET: Registered protocol family 24
  259. [ 17.666034] usbcore: registered new interface driver qmi_wwan
  260. [ 17.679342] usbcore: registered new interface driver rt2500usb
  261. [ 17.754754] usbcore: registered new interface driver rt2800usb
  262. [ 17.761578] usbcore: registered new interface driver sierra
  263. [ 17.765952] usbserial: USB Serial support registered for Sierra USB modem
  264. [ 17.775948] usbcore: registered new interface driver sierra_net
  265. [ 17.882872] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
  266. [ 17.892932] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
  267. [ 17.900365] ath: EEPROM regdomain: 0x833a
  268. [ 17.900382] ath: EEPROM indicates we should expect a country code
  269. [ 17.900405] ath: doing EEPROM country->regdmn map search
  270. [ 17.900419] ath: country maps to regdmn code: 0x37
  271. [ 17.900432] ath: Country alpha2 being used: GB
  272. [ 17.900443] ath: Regpair used: 0x37
  273. [ 17.917173] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  274. [ 17.920292] ieee80211 phy1: Atheros AR9287 Rev:2 mem=0xb8000000, irq=30
  275. [ 17.985371] usbcore: registered new interface driver cdc_mbim
  276. [ 17.995911] usbcore: registered new interface driver ipw
  277. [ 18.000014] usbserial: USB Serial support registered for IPWireless converter
  278. [ 18.014471] usbcore: registered new interface driver option
  279. [ 18.018810] usbserial: USB Serial support registered for GSM modem (1-port)
  280. [ 22.818424] PTM 1.0.27 PTM (E1) firmware version 0.30
  281. [ 22.822345] ifxmips_ptm: PTM init succeed
  282. [ 29.765040] device eth0.1 entered promiscuous mode
  283. [ 29.768470] device eth0 entered promiscuous mode
  284. [ 29.803309] br-lan: port 1(eth0.1) entered forwarding state
  285. [ 29.807552] br-lan: port 1(eth0.1) entered forwarding state
  286. [ 29.813928] random: nonblocking pool is initialized
  287. [ 29.892621] IPv6: ADDRCONF(NETDEV_UP): ptm0: link is not ready
  288. [ 29.923241] IPv6: ADDRCONF(NETDEV_UP): ptm0.10: link is not ready
  289. [ 31.809898] br-lan: port 1(eth0.1) entered forwarding state
  290. [ 32.983271] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  291. [ 35.099456] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  292. [ 35.104708] device wlan1 entered promiscuous mode
  293. [ 35.182921] device wlan0 entered promiscuous mode
  294. [ 35.615951] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  295. [ 35.621107] br-lan: port 2(wlan1) entered forwarding state
  296. [ 35.626512] br-lan: port 2(wlan1) entered forwarding state
  297. [ 35.722498] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  298. [ 35.727712] br-lan: port 3(wlan0) entered forwarding state
  299. [ 35.733037] br-lan: port 3(wlan0) entered forwarding state
  300. [ 37.629848] br-lan: port 2(wlan1) entered forwarding state
  301. [ 37.733847] br-lan: port 3(wlan0) entered forwarding state
  302. [ 59.869399] enter showtime
  303. [ 59.870783] IPv6: ADDRCONF(NETDEV_CHANGE): ptm0: link becomes ready
  304. [ 59.884660] enter showtime
  305. [ 59.901722] IPv6: ADDRCONF(NETDEV_CHANGE): ptm0.10: link becomes ready
RAW Paste Data