API tools faq
paste
igorkrnic

Untitled

igorkrnic
May 5th, 2013
72
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.57 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
  2. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: ST500DM002-1BD142
  6. Serial Number: S2A5ZJSE
  7. Firmware Version: KC45
  8. User Capacity: 500,107,862,016 bytes
  9. Device is: Not in smartctl database [for details use: -P showall]
  10. ATA Version is: 8
  11. ATA Standard is: ATA-8-ACS revision 4
  12. Local Time is: Sun May 5 14:01:22 2013 CEST
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: FAILED!
  18. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  19. See vendor-specific Attribute list for failed Attributes.
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x82) Offline data collection activity
  23. was completed without error.
  24. Auto Offline Data Collection: Enabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: ( 600) seconds.
  30. Offline data collection
  31. capabilities: (0x7b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 1) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 84) minutes.
  48. Conveyance self-test routine
  49. recommended polling time: ( 2) minutes.
  50. SCT capabilities: (0x303f) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 10
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x000f 094 071 006 Pre-fail Always - 28110728
  59. 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
  60. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 4
  61. 5 Reallocated_Sector_Ct 0x0033 002 002 036 Pre-fail Always FAILING_NOW 32360
  62. 7 Seek_Error_Rate 0x000f 073 060 030 Pre-fail Always - 25903151620
  63. 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6137
  64. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  65. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 4
  66. 183 Runtime_Bad_Block 0x0032 098 098 000 Old_age Always - 2
  67. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  68. 187 Reported_Uncorrect 0x0032 024 024 000 Old_age Always - 76
  69. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 42950524941
  70. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  71. 190 Airflow_Temperature_Cel 0x0022 072 066 045 Old_age Always - 28 (Lifetime Min/Max 26/32)
  72. 194 Temperature_Celsius 0x0022 028 040 000 Old_age Always - 28 (0 26 0 0)
  73. 195 Hardware_ECC_Recovered 0x001a 041 022 000 Old_age Always - 28110728
  74. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  75. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  77. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 143357418412025
  78. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1527304779
  79. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 451372798
  80.  
  81. SMART Error Log Version: 1
  82. ATA Error Count: 57 (device log contains only the most recent five errors)
  83. CR = Command Register [HEX]
  84. FR = Features Register [HEX]
  85. SC = Sector Count Register [HEX]
  86. SN = Sector Number Register [HEX]
  87. CL = Cylinder Low Register [HEX]
  88. CH = Cylinder High Register [HEX]
  89. DH = Device/Head Register [HEX]
  90. DC = Device Command Register [HEX]
  91. ER = Error register [HEX]
  92. ST = Status register [HEX]
  93. Powered_Up_Time is measured from power on, and printed as
  94. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  95. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  96.  
  97. Error 57 occurred at disk power-on lifetime: 6129 hours (255 days + 9 hours)
  98. When the command that caused the error occurred, the device was active or idle.
  99.  
  100. After command completion occurred, registers were:
  101. ER ST SC SN CL CH DH
  102. -- -- -- -- -- -- --
  103. 40 51 00 ff ff ff 0f
  104.  
  105. Commands leading to the command that caused the error were:
  106. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  107. -- -- -- -- -- -- -- -- ---------------- --------------------
  108. 60 00 00 ff ff ff 4f 00 34d+00:28:29.561 READ FPDMA QUEUED
  109. 27 00 00 00 00 00 e0 00 34d+00:28:29.561 READ NATIVE MAX ADDRESS EXT
  110. ec 00 00 00 00 00 a0 00 34d+00:28:29.560 IDENTIFY DEVICE
  111. ef 03 46 00 00 00 a0 00 34d+00:28:29.559 SET FEATURES [Set transfer mode]
  112. 27 00 00 00 00 00 e0 00 34d+00:28:29.559 READ NATIVE MAX ADDRESS EXT
  113.  
  114. Error 56 occurred at disk power-on lifetime: 6128 hours (255 days + 8 hours)
  115. When the command that caused the error occurred, the device was active or idle.
  116.  
  117. After command completion occurred, registers were:
  118. ER ST SC SN CL CH DH
  119. -- -- -- -- -- -- --
  120. 40 51 00 ff ff ff 0f
  121.  
  122. Commands leading to the command that caused the error were:
  123. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  124. -- -- -- -- -- -- -- -- ---------------- --------------------
  125. 60 00 80 ff ff ff 4f 00 33d+23:55:20.811 READ FPDMA QUEUED
  126. 61 00 08 ff ff ff 4f 00 33d+23:55:20.810 WRITE FPDMA QUEUED
  127. 60 00 80 ff ff ff 4f 00 33d+23:55:18.371 READ FPDMA QUEUED
  128. 61 00 08 ff ff ff 4f 00 33d+23:55:18.362 WRITE FPDMA QUEUED
  129. 60 00 80 ff ff ff 4f 00 33d+23:55:18.361 READ FPDMA QUEUED
  130.  
  131. Error 55 occurred at disk power-on lifetime: 6128 hours (255 days + 8 hours)
  132. When the command that caused the error occurred, the device was active or idle.
  133.  
  134. After command completion occurred, registers were:
  135. ER ST SC SN CL CH DH
  136. -- -- -- -- -- -- --
  137. 40 51 00 ff ff ff 0f
  138.  
  139. Commands leading to the command that caused the error were:
  140. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  141. -- -- -- -- -- -- -- -- ---------------- --------------------
  142. 60 00 00 ff ff ff 4f 00 33d+23:55:10.763 READ FPDMA QUEUED
  143. 27 00 00 00 00 00 e0 00 33d+23:55:10.763 READ NATIVE MAX ADDRESS EXT
  144. ec 00 00 00 00 00 a0 00 33d+23:55:10.762 IDENTIFY DEVICE
  145. ef 03 46 00 00 00 a0 00 33d+23:55:10.762 SET FEATURES [Set transfer mode]
  146. 27 00 00 00 00 00 e0 00 33d+23:55:10.761 READ NATIVE MAX ADDRESS EXT
  147.  
  148. Error 54 occurred at disk power-on lifetime: 6128 hours (255 days + 8 hours)
  149. When the command that caused the error occurred, the device was active or idle.
  150.  
  151. After command completion occurred, registers were:
  152. ER ST SC SN CL CH DH
  153. -- -- -- -- -- -- --
  154. 40 51 00 ff ff ff 0f
  155.  
  156. Commands leading to the command that caused the error were:
  157. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  158. -- -- -- -- -- -- -- -- ---------------- --------------------
  159. 60 00 00 ff ff ff 4f 00 33d+23:55:06.946 READ FPDMA QUEUED
  160. 60 00 80 ff ff ff 4f 00 33d+23:55:03.814 READ FPDMA QUEUED
  161. 61 00 08 ff ff ff 4f 00 33d+23:55:03.813 WRITE FPDMA QUEUED
  162. 60 00 80 ff ff ff 4f 00 33d+23:55:03.722 READ FPDMA QUEUED
  163. 61 00 08 ff ff ff 4f 00 33d+23:55:03.721 WRITE FPDMA QUEUED
  164.  
  165. Error 53 occurred at disk power-on lifetime: 6128 hours (255 days + 8 hours)
  166. When the command that caused the error occurred, the device was active or idle.
  167.  
  168. After command completion occurred, registers were:
  169. ER ST SC SN CL CH DH
  170. -- -- -- -- -- -- --
  171. 40 51 00 ff ff ff 0f
  172.  
  173. Commands leading to the command that caused the error were:
  174. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  175. -- -- -- -- -- -- -- -- ---------------- --------------------
  176. 60 00 00 ff ff ff 4f 00 33d+23:28:37.601 READ FPDMA QUEUED
  177. 60 00 80 ff ff ff 4f 00 33d+23:28:36.391 READ FPDMA QUEUED
  178. 60 00 80 ff ff ff 4f 00 33d+23:28:35.718 READ FPDMA QUEUED
  179. 60 00 80 ff ff ff 4f 00 33d+23:28:35.370 READ FPDMA QUEUED
  180. ea 00 00 00 00 00 a0 00 33d+23:28:35.031 FLUSH CACHE EXT
  181.  
  182. SMART Self-test log structure revision number 1
  183. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  184.  
  185.  
  186. SMART Selective self-test log data structure revision number 1
  187. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  188. 1 0 0 Not_testing
  189. 2 0 0 Not_testing
  190. 3 0 0 Not_testing
  191. 4 0 0 Not_testing
  192. 5 0 0 Not_testing
  193. Selective self-test flags (0x0):
  194. After scanning selected spans, do NOT read-scan remainder of disk.
  195. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!