API tools faq
paste
Advertisement
Guest User

RK3399 not finding sdcard or eMMC

a guest
Jun 1st, 2018
383
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.67 KB | None | 0 0
raw download clone embed print report
  1. # kernel commandline: earlycon=uart8250,mmio32,0xff1a0000 console=tty1 cpufreq.off=1 cpuidle.off=1 clk_ignore_unused debug panic=60 crashkernel=128M console=uart8250,mmio32,0xff1a0000 earlyprintk=serial,0xff1a0000,1500000n8 root=/dev/mmcblk0p6 rw rootdelay=5 rootfstype=ext4 noinitrd mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00008000@0x00006000(resource),0x0000A000@0x0000E000(kernel),0x00002000@0x00018000(backup),-@0x0001A000(boot) init=/sbin/init
  2.  
  3.  
  4.  
  5. DDR Version 1.07 20161103
  6. In
  7. soft reset
  8. SRX
  9. Channel 0: DDR3, 666MHz
  10. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  11. Channel 1: DDR3, 666MHz
  12. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  13. 256B stride
  14. ch 0 ddrconfig = 0x101, ddrsize = 0x20
  15. ch 1 ddrconfig = 0x101, ddrsize = 0x20
  16. pmugrf_os_reg[2] = 0x32817281, stride = 0x9
  17. OUT
  18. Boot1: 2016-07-29, version: 1.05
  19. CPUId = 0x0
  20. ChipType = 10 1910
  21. SdmmcInit=2 0
  22. BootCapSize=100000
  23. UserCapSize=14910MB
  24. FwPartOffset=2000 , 100000
  25. SdmmcInit=0 0
  26. BootCapSize=0
  27. UserCapSize=15193MB
  28. FwPartOffset=2000 , 0
  29. run on sd0
  30. StorageInit ok = 81490
  31. LoadTrustBL
  32. No find bl30.bin
  33. No find bl32.bin
  34. theLoader 200000 153928
  35. LoaderFlag2: 0xc3524200
  36. WARNING: plat_rockchip_comm_sram_init:code:ff8d9000, 67000, ef0
  37. NOTICE: BL31: v1.2(debug):b995f80
  38. NOTICE: BL31: Built : 16:53:56, Nov 7 2016
  39. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  40. INFO: boot cpu mask: 0
  41. INFO: Vesion: 2016.0.01
  42. INFO: plat_rockchip_pmu_init(1211): pd status 3e
  43. INFO: BL31: Initializing runtime services
  44. INFO: BL31: Preparing for EL3 exit to normal world
  45. INFO: Entry point address = 0x200000
  46. INFO: SPSR = 0x3c9
  47.  
  48.  
  49. U-Boot 2017.02-RK3399-06-ga7c7ca8 (Apr 25 2017 - 15:10:21)
  50.  
  51. CPU: rk3399
  52. cpu version = 0
  53. CPU's clock information:
  54. aplll = 816000000HZ
  55. apllb = 24000000HZ
  56. gpll = 594000000HZ
  57. aclk_periph_h = 148500000HZ, hclk_periph_h = 74250000HZ, pclk_periph_h = 37125000HZ
  58. aclk_periph_l0 = 99000000HZ, hclk_periph_l0 = 99000000HZ, pclk_periph_l0 = 49500000HZ
  59. hclk_periph_l1 = 99000000HZ, pclk_periph_l1 = 49500000HZ
  60. cpll = 800000000HZ
  61. dpll = 660000000HZ
  62. vpll = 24000000HZ
  63. npll = 24000000HZ
  64. ppll = 676000000HZ
  65. Board: Rockchip platform Board
  66. Uboot as second level loader
  67. DRAM: Found dram banks: 1
  68. Adding bank:0000000000200000(000000007fe00000)
  69. 128 MiB
  70. SdmmcInit = 0 0
  71. SDCard Boot.
  72. storage init OK!
  73. Using default environment
  74.  
  75. GetParam
  76. Load FDT from resource image.
  77. no key node
  78. usb bc: can find node by path: /dwc-control-usb/usb_bc
  79. pmic:rk808
  80. can't find dts node for pwm1
  81. Cannot find regulator pwm id
  82. CPU's clock information:
  83. aplll = 816000000HZ
  84. apllb = 24000000HZ
  85. gpll = 594000000HZ
  86. aclk_periph_h = 148500000HZ, hclk_periph_h = 74250000HZ, pclk_periph_h = 37125000HZ
  87. aclk_periph_l0 = 99000000HZ, hclk_periph_l0 = 99000000HZ, pclk_periph_l0 = 49500000HZ
  88. hclk_periph_l1 = 99000000HZ, pclk_periph_l1 = 49500000HZ
  89. cpll = 800000000HZ
  90. dpll = 660000000HZ
  91. vpll = 24000000HZ
  92. npll = 24000000HZ
  93. ppll = 676000000HZ
  94. Can't find dts node for fuel guage cw201x
  95. can't find dts node for ec-battery
  96. Can't find dts node for charger bq25700
  97. SecureBootEn = 0, SecureBootLock = 0
  98.  
  99. #Boot ver: 0000-00-00#0.00
  100. empty serial no.
  101. normal boot.
  102. checkKey
  103. vbus = 1
  104. no fuel gauge found
  105. no fuel gauge found
  106. Can't find display display route node
  107. read logo on state from dts [0]
  108. no fuel gauge found
  109. misc partition not found!
  110. Hit any key to stop autoboot: 0
  111. load fdt from resouce.
  112. Secure Boot state: 0
  113. kernel @ 0x00280000 (0x01595200)
  114. ramdisk @ 0x05bf0000 (0x00000000)
  115. bootrk: do_bootm_linux...
  116. Loading Device Tree to 0000000005600000, end 000000000560fe72 ... OK
  117. Add bank:0000000000200000, 000000007fe00000
  118.  
  119. Starting kernel ...
  120.  
  121. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  122. [ 0.000000] Linux version 4.16.0-kamikaze (msaun@geminid) (gcc version 8.1.0 (GCC)) #1 SMP Thu May 31 16:45:50 ACST 2018
  123. [ 0.000000] Machine model: Firefly-RK3399 Board
  124. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
  125. [ 0.000000] bootconsole [uart8250] enabled
  126. [ 0.000000] efi: Getting EFI parameters from FDT:
  127. [ 0.000000] efi: UEFI not found.
  128. [ 0.000000] crashkernel reserved: 0x0000000077e00000 - 0x000000007fe00000 (128 MB)
  129. [ 0.000000] cma: Reserved 16 MiB at 0x0000000076c00000
  130. [ 0.000000] NUMA: No NUMA configuration found
  131. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
  132. [ 0.000000] NUMA: NODE_DATA [mem 0x7ff6e080-0x7ff6fb7f]
  133. [ 0.000000] Zone ranges:
  134. [ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
  135. [ 0.000000] Normal empty
  136. [ 0.000000] Movable zone start for each node
  137. [ 0.000000] Early memory node ranges
  138. [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
  139. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  140. [ 0.000000] On node 0 totalpages: 523776
  141. [ 0.000000] DMA32 zone: 8184 pages used for memmap
  142. [ 0.000000] DMA32 zone: 0 pages reserved
  143. [ 0.000000] DMA32 zone: 523776 pages, LIFO batch:31
  144. [ 0.000000] psci: probing for conduit method from DT.
  145. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  146. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  147. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  148. [ 0.000000] psci: SMC Calling Convention v1.0
  149. [ 0.000000] random: fast init done
  150. [ 0.000000] percpu: Embedded 23 pages/cpu @ (ptrval) s55960 r8192 d30056 u94208
  151. [ 0.000000] pcpu-alloc: s55960 r8192 d30056 u94208 alloc=23*4096
  152. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  153. [ 0.000000] Detected VIPT I-cache on CPU0
  154. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  155. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  156. [ 0.000000] Policy zone: DMA32
  157. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 console=tty1 cpufreq.off=1 cpuidle.off=1 clk_ignore_unused debug panic=60 crashke1
  158. [ 0.000000] Memory: 1891044K/2095104K available (13052K kernel code, 916K rwdata, 7208K rodata, 896K init, 491K bss, 187676K reserved, 16384K cma-rese)
  159. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  160. [ 0.000000] Hierarchical RCU implementation.
  161. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  162. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  163. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  164. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  165. [ 0.000000] GICv3: Distributor has no Range Selector support
  166. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  167. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  168. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @74880000 (flat, esz 8, psz 64K, shr 0)
  169. [ 0.000000] ITS: using cache flushing for cmd queue
  170. [ 0.000000] GIC: using LPI property table @0x0000000074840000
  171. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  172. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  173. [ 0.000000] CPU0: using LPI pending table @0x0000000074850000
  174. [ 0.000000] GIC: using cache flushing for LPI property table
  175. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  176. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  177. [ 0.000000] clk: couldn't get clock 15 for /clock-controller@ff760000
  178. [ 0.000000] rockchip_clk_of_add_provider: could not register clk provider
  179. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  180. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  181. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  182. [ 0.001222] Failed to get pclk for 'rk_timer'
  183. [ 0.001633] Failed to initialize '/rktimer@ff850000': -517
  184. [ 0.002720] Console: colour dummy device 80x25
  185. [ 0.003675] console [tty1] enabled
  186. [ 0.102818] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  187. [ 0.103780] pid_max: default: 32768 minimum: 301
  188. [ 0.104286] Security Framework initialized
  189. [ 0.105694] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  190. [ 0.106891] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  191. [ 0.107589] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  192. [ 0.108238] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  193. [ 0.110120] ASID allocator initialised with 32768 entries
  194. [ 0.110700] Hierarchical SRCU implementation.
  195. [ 0.111363] Platform MSI: interrupt-controller@fee20000 domain created
  196. [ 0.112256] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  197. [ 0.114619] EFI services will not be available.
  198. [ 0.115300] smp: Bringing up secondary CPUs ...
  199. [ 0.116134] Detected VIPT I-cache on CPU1
  200. [ 0.116166] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  201. [ 0.116212] CPU1: using LPI pending table @0x0000000074120000
  202. [ 0.116256] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  203. [ 0.116712] Detected VIPT I-cache on CPU2
  204. [ 0.116733] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  205. [ 0.116775] CPU2: using LPI pending table @0x0000000074150000
  206. [ 0.116801] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  207. [ 0.117211] Detected VIPT I-cache on CPU3
  208. [ 0.117231] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  209. [ 0.117273] CPU3: using LPI pending table @0x0000000074170000
  210. [ 0.117297] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  211. [ 0.120335] Detected PIPT I-cache on CPU4
  212. [ 0.121633] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  213. [ 0.124167] CPU4: using LPI pending table @0x00000000741a0000
  214. [ 0.125357] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  215. [ 0.132266] Detected PIPT I-cache on CPU5
  216. [ 0.133422] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  217. [ 0.135907] CPU5: using LPI pending table @0x00000000741d0000
  218. [ 0.136971] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  219. [ 0.140677] smp: Brought up 1 node, 6 CPUs
  220. [ 0.152062] SMP: Total of 6 processors activated.
  221. [ 0.152534] CPU features: detected feature: GIC system register CPU interface
  222. [ 0.153211] CPU features: detected feature: 32-bit EL0 Support
  223. [ 0.153760] CPU features: detected feature: Kernel page table isolation (KPTI)
  224. [ 0.234002] CPU: All CPU(s) started at EL2
  225. [ 0.234888] alternatives: patching kernel code
  226. [ 0.238615] devtmpfs: initialized
  227. [ 0.251919] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  228. [ 0.253149] futex hash table entries: 2048 (order: 6, 262144 bytes)
  229. [ 0.254946] xor: measuring software checksum speed
  230. [ 0.294981] 8regs : 1615.000 MB/sec
  231. [ 0.335156] 8regs_prefetch: 1395.000 MB/sec
  232. [ 0.375362] 32regs : 1853.000 MB/sec
  233. [ 0.415572] 32regs_prefetch: 1570.000 MB/sec
  234. [ 0.416006] xor: using function: 32regs (1853.000 MB/sec)
  235. [ 0.416753] pinctrl core: initialized pinctrl subsystem
  236. [ 0.418128] regulator-dummy: no parameters
  237. [ 0.419321] DMI not present or invalid.
  238. [ 0.420779] NET: Registered protocol family 16
  239. [ 0.426190] audit: initializing netlink subsys (disabled)
  240. [ 0.428400] audit: type=2000 audit(0.408:1): state=initialized audit_enabled=0 res=1
  241. [ 0.430562] vdso: 2 pages (1 code @ 000000001ee3d53a, 1 data @ 00000000b2948e54)
  242. [ 0.433432] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  243. [ 0.444286] DMA: preallocated 256 KiB pool for atomic allocations
  244. [ 0.446602] Serial: AMBA PL011 UART driver
  245. [ 0.459046] rockchip-pm-domain ff310000.power-management:power-controller: pd_iep: failed to get clk at index 0: -517
  246. [ 0.460523] rockchip-pm-domain ff310000.power-management:power-controller: failed to handle node pd_iep: -517
  247. [ 0.467839] rockchip-pinctrl pinctrl: bank gpio2 is not valid
  248. [ 0.468690] rockchip-pinctrl pinctrl: bank gpio3 is not valid
  249. [ 0.469296] rockchip-pinctrl pinctrl: bank gpio4 is not valid
  250. [ 0.471726] rockchip-pinctrl pinctrl: bank gpio2 is not valid
  251. [ 0.472290] rockchip-pinctrl pinctrl: bank gpio3 is not valid
  252. [ 0.472829] rockchip-pinctrl pinctrl: bank gpio4 is not valid
  253. [ 0.519020] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  254. [ 0.524197] cryptd: max_cpu_qlen set to 1000
  255. [ 0.593326] raid6: int64x1 gen() 294 MB/s
  256. [ 0.661829] raid6: int64x1 xor() 308 MB/s
  257. [ 0.730325] raid6: int64x2 gen() 458 MB/s
  258. [ 0.798843] raid6: int64x2 xor() 407 MB/s
  259. [ 0.867419] raid6: int64x4 gen() 666 MB/s
  260. [ 0.936006] raid6: int64x4 xor() 500 MB/s
  261. [ 1.004588] raid6: int64x8 gen() 789 MB/s
  262. [ 1.073369] raid6: int64x8 xor() 516 MB/s
  263. [ 1.141937] raid6: neonx1 gen() 511 MB/s
  264. [ 1.210409] raid6: neonx1 xor() 599 MB/s
  265. [ 1.278937] raid6: neonx2 gen() 767 MB/s
  266. [ 1.347422] raid6: neonx2 xor() 795 MB/s
  267. [ 1.416018] raid6: neonx4 gen() 1004 MB/s
  268. [ 1.484592] raid6: neonx4 xor() 960 MB/s
  269. [ 1.553230] raid6: neonx8 gen() 1053 MB/s
  270. [ 1.621891] raid6: neonx8 xor() 987 MB/s
  271. [ 1.622295] raid6: using algorithm neonx8 gen() 1053 MB/s
  272. [ 1.622798] raid6: .... xor() 987 MB/s, rmw enabled
  273. [ 1.623255] raid6: using neon recovery algorithm
  274. [ 1.624614] ACPI: Interpreter disabled.
  275. [ 1.625995] iommu: Adding device ff8f0000.vop to group 0
  276. [ 1.626723] iommu: Adding device ff900000.vop to group 1
  277. [ 1.628796] vgaarb: loaded
  278. [ 1.631092] SCSI subsystem initialized
  279. [ 1.632287] libata version 3.00 loaded.
  280. [ 1.633547] usbcore: registered new interface driver usbfs
  281. [ 1.634195] usbcore: registered new interface driver hub
  282. [ 1.637685] usbcore: registered new device driver usb
  283. [ 1.639439] media: Linux media interface: v0.10
  284. [ 1.639982] Linux video capture interface: v2.00
  285. [ 1.640718] pps_core: LinuxPPS API ver. 1 registered
  286. [ 1.641191] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  287. [ 1.642161] PTP clock support registered
  288. [ 1.643574] EDAC MC: Ver: 3.0.0
  289. [ 1.645927] Advanced Linux Sound Architecture Driver Initialized.
  290. [ 1.647699] Bluetooth: Core ver 2.22
  291. [ 1.648207] NET: Registered protocol family 31
  292. [ 1.648639] Bluetooth: HCI device and connection manager initialized
  293. [ 1.649263] Bluetooth: HCI socket layer initialized
  294. [ 1.649724] Bluetooth: L2CAP socket layer initialized
  295. [ 1.650229] Bluetooth: SCO socket layer initialized
  296. [ 1.654581] clocksource: Switched to clocksource arch_sys_counter
  297. [ 1.656111] VFS: Disk quotas dquot_6.6.0
  298. [ 1.656582] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  299. [ 1.657640] pnp: PnP ACPI: disabled
  300. [ 1.672451] NET: Registered protocol family 2
  301. [ 1.674379] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
  302. [ 1.675722] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  303. [ 1.676611] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  304. [ 1.677651] TCP: Hash tables configured (established 16384 bind 16384)
  305. [ 1.678689] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  306. [ 1.679356] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  307. [ 1.680205] NET: Registered protocol family 1
  308. [ 1.684624] RPC: Registered named UNIX socket transport module.
  309. [ 1.685247] RPC: Registered udp transport module.
  310. [ 1.685693] RPC: Registered tcp transport module.
  311. [ 1.686132] RPC: Registered tcp NFSv4.1 backchannel transport module.
  312. [ 1.687472] PCI: CLS 0 bytes, default 128
  313. [ 1.696924] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  314. [ 1.700492] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  315. [ 1.702127] kvm [1]: 8-bit VMID
  316. [ 1.704569] kvm [1]: vgic-v2@fff20000
  317. [ 1.705621] kvm [1]: GIC system register CPU interface enabled
  318. [ 1.708185] kvm [1]: vgic interrupt IRQ10
  319. [ 1.711079] kvm [1]: Hyp mode initialized successfully
  320. [ 1.725856] Initialise system trusted keyrings
  321. [ 1.727205] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  322. [ 1.740728] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  323. [ 1.743777] NFS: Registering the id_resolver key type
  324. [ 1.744565] Key type id_resolver registered
  325. [ 1.744961] Key type id_legacy registered
  326. [ 1.745526] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  327. [ 1.746151] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  328. [ 1.750144] fuse init (API version 7.26)
  329. [ 1.751867] 9p: Installing v9fs 9p2000 file system support
  330. [ 1.772399] Key type asymmetric registered
  331. [ 1.773004] Asymmetric key parser 'x509' registered
  332. [ 1.774285] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  333. [ 1.775765] io scheduler noop registered
  334. [ 1.776455] io scheduler cfq registered (default)
  335. [ 1.776902] io scheduler mq-deadline registered
  336. [ 1.777413] io scheduler kyber registered
  337. [ 1.781315] phy phy-ff770000.syscon:phy@f780.0: Looking up phy-supply from device tree
  338. [ 1.782189] phy phy-ff770000.syscon:phy@f780.0: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
  339. [ 1.784059] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: no phyclk specified
  340. [ 1.785689] phy phy-ff770000.syscon:usb2-phy@e450.1: Looking up phy-supply from device tree
  341. [ 1.786603] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: failed to create phy
  342. [ 1.787872] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: no phyclk specified
  343. [ 1.788902] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree
  344. [ 1.789965] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: failed to create phy
  345. [ 1.791343] rockchip-pcie-phy ff770000.syscon:pcie-phy: refclk not found.
  346. [ 1.798380] pwm-backlight backlight: Looking up power-supply from device tree
  347. [ 1.799455] pwm-backlight backlight: Looking up power-supply property in node /backlight failed
  348. [ 1.800293] pwm-backlight backlight: backlight supply power not found, using dummy regulator
  349. [ 1.913312] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  350. [ 1.930427] cacheinfo: Unable to detect cache hierarchy for CPU 0
  351. [ 1.943455] loop: module loaded
  352. [ 1.967525] usbcore: registered new interface driver rtsx_usb
  353. [ 1.972322] SSFDC read-only Flash Translation layer
  354. [ 1.976996] libphy: Fixed MDIO Bus: probed
  355. [ 1.979106] tun: Universal TUN/TAP device driver, 1.6
  356. [ 1.980879] CAN device driver interface
  357. [ 1.987167] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  358. [ 1.988477] usbcore: registered new interface driver pegasus
  359. [ 1.989546] usbcore: registered new interface driver rtl8150
  360. [ 1.990192] usbcore: registered new interface driver r8152
  361. [ 1.990747] usbcore: registered new interface driver cdc_ether
  362. [ 1.991364] usbcore: registered new interface driver CoreChips
  363. [ 1.991981] usbcore: registered new interface driver smsc75xx
  364. [ 1.992598] usbcore: registered new interface driver smsc95xx
  365. [ 1.993232] usbcore: registered new interface driver net1080
  366. [ 1.993808] usbcore: registered new interface driver plusb
  367. [ 1.994376] usbcore: registered new interface driver cdc_subset
  368. [ 1.994968] usbcore: registered new interface driver zaurus
  369. [ 1.995535] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  370. [ 1.996303] usbcore: registered new interface driver cdc_ncm
  371. [ 1.997417] VFIO - User Level meta-driver version: 0.3
  372. [ 1.999888] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  373. [ 2.000604] ehci-pci: EHCI PCI platform driver
  374. [ 2.001075] ehci-platform: EHCI generic platform driver
  375. [ 2.002446] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  376. [ 2.003148] ohci-pci: OHCI PCI platform driver
  377. [ 2.003665] ohci-platform: OHCI generic platform driver
  378. [ 2.005388] usbcore: registered new interface driver usb-storage
  379. [ 2.010719] i2c /dev entries driver
  380. [ 2.015726] rk808 0-001b: chip id: 0x0
  381. [ 2.024569] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  382. [ 2.026786] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at 00000000a3d5fa67
  383. [ 2.028924] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at 000000003366ac1e
  384. [ 2.031346] IR NEC protocol handler initialized
  385. [ 2.031873] IR RC5(x/sz) protocol handler initialized
  386. [ 2.032345] IR RC6 protocol handler initialized
  387. [ 2.032767] IR JVC protocol handler initialized
  388. [ 2.033257] IR Sony protocol handler initialized
  389. [ 2.033692] IR SANYO protocol handler initialized
  390. [ 2.034130] IR Sharp protocol handler initialized
  391. [ 2.034571] IR MCE Keyboard/mouse protocol handler initialized
  392. [ 2.035118] IR XMP protocol handler initialized
  393. [ 2.035844] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
  394. [ 2.036845] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
  395. [ 2.040978] Bluetooth: HCI UART driver ver 2.3
  396. [ 2.041850] Bluetooth: HCI UART protocol LL registered
  397. [ 2.044456] sdhci: Secure Digital Host Controller Interface driver
  398. [ 2.045403] sdhci: Copyright(c) Pierre Ossman
  399. [ 2.046888] Synopsys Designware Multimedia Card Interface Driver
  400. [ 2.050099] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
  401. [ 2.051586] usbcore: registered new interface driver vub300
  402. [ 2.052927] usbcore: registered new interface driver ushc
  403. [ 2.054460] sdhci-pltfm: SDHCI platform and OF driver helper
  404. [ 2.060026] ledtrig-cpu: registered to indicate activity on CPUs
  405. [ 2.062278] usbcore: registered new interface driver usbhid
  406. [ 2.062906] usbhid: USB HID core driver
  407. [ 2.066666] rockchip-saradc ff100000.saradc: failed to get pclk
  408. [ 2.080935] NET: Registered protocol family 10
  409. [ 2.083308] Segment Routing with IPv6
  410. [ 2.086824] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  411. [ 2.088194] NET: Registered protocol family 17
  412. [ 2.088720] Bridge firewalling registered
  413. [ 2.089531] can: controller area network core (rev 20170425 abi 9)
  414. [ 2.090181] NET: Registered protocol family 29
  415. [ 2.090605] can: raw protocol (rev 20170425)
  416. [ 2.091005] can: broadcast manager protocol (rev 20170425 t)
  417. [ 2.091540] can: netlink gateway (rev 20170425) max_hops=1
  418. [ 2.092345] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  419. [ 2.092906] Bluetooth: HIDP socket layer initialized
  420. [ 2.093519] 8021q: 802.1Q VLAN Support v1.8
  421. [ 2.093953] 9pnet: Installing 9P2000 support
  422. [ 2.094612] Key type dns_resolver registered
  423. [ 2.098004] registered taskstats version 1
  424. [ 2.098447] Loading compiled-in X.509 certificates
  425. [ 2.100847] Btrfs loaded, crc32c=crc32c-arm64-ce
  426. [ 2.123412] rockchip-pm-domain ff310000.power-management:power-controller: pd_iep: failed to get clk at index 0: -517
  427. [ 2.124619] rockchip-pm-domain ff310000.power-management:power-controller: failed to handle node pd_iep: -517
  428. [ 2.127632] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: no phyclk specified
  429. [ 2.129387] phy phy-ff770000.syscon:usb2-phy@e450.1: Looking up phy-supply from device tree
  430. [ 2.130327] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: failed to create phy
  431. [ 2.132437] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: no phyclk specified
  432. [ 2.134173] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree
  433. [ 2.135071] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: failed to create phy
  434. [ 2.136615] rockchip-pcie-phy ff770000.syscon:pcie-phy: refclk not found.
  435. [ 2.144379] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
  436. [ 2.145915] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
  437. [ 2.148719] rockchip-saradc ff100000.saradc: failed to get pclk
  438. [ 2.154016] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:55:25 UTC (1358499325)
  439. [ 2.155386] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  440. [ 2.169739] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  441. [ 2.170548] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  442. [ 2.171360] cfg80211: failed to load regulatory.db
  443. [ 2.172010] clk: Not disabling unused clocks
  444. [ 2.174967] ALSA device list:
  445. [ 2.176260] No soundcards found.
  446. [ 2.181148] Waiting 5 sec before mounting root device...
  447. [ 7.435305] VFS: Cannot open root device "mmcblk0p6" or unknown-block(0,0): error -6
  448. [ 7.438522] Please append a correct "root=" boot option; here are the available partitions:
  449. [ 7.442309] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  450. [ 7.445248] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 4.16.0-kamikaze #1
  451. [ 7.447503] Hardware name: Firefly-RK3399 Board (DT)
  452. [ 7.449278] Call trace:
  453. [ 7.450766] dump_backtrace+0x0/0x188
  454. [ 7.452387] show_stack+0x14/0x20
  455. [ 7.453814] dump_stack+0x9c/0xbc
  456. [ 7.455318] panic+0x130/0x28c
  457. [ 7.456729] mount_block_root+0x1a8/0x258
  458. [ 7.458327] mount_root+0x10c/0x138
  459. [ 7.459792] prepare_namespace+0x128/0x16c
  460. [ 7.461413] kernel_init_freeable+0x1f4/0x214
  461. [ 7.463142] kernel_init+0x10/0x100
  462. [ 7.464607] ret_from_fork+0x10/0x18
  463. [ 7.466240] SMP: stopping secondary CPUs
  464. [ 7.467819] Kernel Offset: disabled
  465. [ 7.469199] CPU features: 0x180200c
  466. [ 7.470546] Memory Limit: none
  467. [ 7.472264] Rebooting in 60 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!