Linux version 4.14.170 (root@linux) (gcc version 8.3.0 (OpenWrt GCC 8.3.0 r9737-        b65a270c85)) #184 SMP Thu Feb 6 15:16:17 +04 2020
SoC Type: MediaTek MT7621 ver:1 eco:3
bootconsole [early0] enabled
CPU0 revision is: 0001992f (MIPS 1004Kc)
MIPS: machine is Dlink DIR882 A1
Determined physical RAM map:
 memory: 08000000 @ 00000000 (usable)
VPE topology {2,2} total 4
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Zone ranges:
  Normal   [mem 0x0000000000000000-0x0000000007ffffff]
  HighMem  empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
On node 0 totalpages: 32768
free_area_init_node: node 0, pgdat 80613620, node_mem_map 81003000
  Normal zone: 256 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 32768 pages, LIFO batch:7
percpu: Embedded 14 pages/cpu s26000 r8192 d23152 u57344
pcpu-alloc: s26000 r8192 d23152 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS0,57600 console=ttyS0,57600n8 root=/dev/mtdbloc        k5 rootfstype=squashfs noinitrd
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 12288 bytes
log_buf_len min size: 16384 bytes
log_buf_len: 32768 bytes
early log buf free: 14352(87%)
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Writing ErrCtl register=00029000
Readback ErrCtl register=00029000
Memory: 122924K/131072K available (4433K kernel code, 266K rwdata, 1524K rodata,         228K init, 213K bss, 8148K reserved, 0K cma-reserved, 0K highmem)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS: 256
CPU Clock: 880MHz
clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns        : 440795247997 ns
clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773        742 ns
sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
CPU1 revision is: 0001992f (MIPS 1004Kc)
Synchronize counters for CPU 1: done.
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
CPU2 revision is: 0001992f (MIPS 1004Kc)
Synchronize counters for CPU 2: done.
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
CPU3 revision is: 0001992f (MIPS 1004Kc)
Synchronize counters for CPU 3: done.
smp: Brought up 1 node, 4 CPUs
random: get_random_u32 called from bucket_table_alloc+0x2b0/0x360 with crng_init        =0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911        2604462750000 ns
futex hash table entries: 1024 (order: 3, 32768 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
FPU Affinity set after 11720 emulations
pull PCIe RST: RALINK_RSTCTRL = 4000000
release PCIe RST: RALINK_RSTCTRL = 7000000
***** Xtal 40MHz *****
release PCIe RST: RALINK_RSTCTRL = 7000000
Port 0 N_FTS = 1b105000
Port 1 N_FTS = 1b105000
Port 2 N_FTS = 1b102800
PCIE2 no card, disable it(RST&CLK)
 -> 21007f2
PCIE0 enabled
PCIE1 enabled
PCI host bridge /pcie@1e140000 ranges:
 MEM 0x0000000060000000..0x000000006fffffff
  IO 0x000000001e160000..0x000000001e16ffff
PCI coherence region base: 0x87c25cd8, mask/settings: 0x60000000
mt7621_gpio 1e000600.gpio: registering 32 gpios
mt7621_gpio 1e000600.gpio: registering 32 gpios
mt7621_gpio 1e000600.gpio: registering 32 gpios
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
pci_bus 0000:00: root bus resource [io  0xffffffff]
pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
pci 0000:00:00.0: reg 0x14: [mem 0x60200000-0x6020ffff]
pci 0000:00:00.0: supports D1
pci 0000:00:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
pci 0000:00:01.0: reg 0x14: [mem 0x60210000-0x6021ffff]
pci 0000:00:01.0: supports D1
pci 0000:00:01.0: PME# supported from D0 D1 D3hot
pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
clocksource: Switched to clocksource GIC
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 32
4 CPUs re-calibrate udelay(lpj = 2924544)
workingset: timestamp_bits=30 max_order=15 bucket_order=0
random: fast init done
squashfs: version 4.0 (2009/01/31) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
serial8250_init
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
console [ttyS0] disabled
1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a         16550A
console [ttyS0] enabled
bootconsole [early0] disabled
Ralink gpio driver initialized
MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
spi-mt7621 1e000b00.spi: sys_freq: 220000000
m25p80 spi0.0: w25q128 (16384 Kbytes)
spi0.0: parsing partitions cmdlinepart
spi0.0: got parser cmdlinepart
6 fixed-partitions partitions found on MTD device spi0.0
Creating 6 MTD partitions on "spi0.0":
0x000000000000-0x000000030000 : "u-boot"
0x000000030000-0x000000034000 : "u-boot-env"
0x000000040000-0x000000060000 : "factory"
0x000000060000-0x000001000000 : "linux"
2 uimage-fw partitions found on MTD device linux
Creating 2 MTD partitions on "linux":
0x000000000000-0x0000001f0000 : "kernel"
0x0000001f0000-0x000000fa0000 : "rootfs"
mtd: device 5 (rootfs) set to be root filesystem
1 squashfs-split partitions found on MTD device rootfs
0x000000f20000-0x000000fa0000 : "rootfs_data"
0x000000ff0000-0x000001000000 : "nvram"
0x000000000000-0x000001000000 : "fullflash"
libphy: Fixed MDIO Bus: probed
mtk_soc_eth 1e100000.ethernet: generated random MAC address 42:02:de:97:0d:a1
libphy: mdio: probed
mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
GACT probability NOT on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
    Performance counters on
    input device check on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
nf_conntrack_rtsp v0.7 loading
xt_time: kernel timezone is -0000
ip_set: protocol 6
gre: GRE over IPv4 demultiplexor driver
nf_nat_rtsp v0.7 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
searching for nvram
nvram size = 65536
VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Freeing unused kernel memory: 228K
This architecture does not have kernel memory protection.
random: crng init done
mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
Loading modules backported from Linux version wireless-drivers-next-for-davem-20        17-09-01-0-geb464d4a8d09
Backport generated by backports.git backports-20160324-111-g97b8d7c4
bus=0x1, slot = 0x0, irq=0x0
mt7615e 0000:01:00.0: Load Calibration File /etc/wlan/MT7615_2G_EEPROM.bin
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
bus=0x2, slot = 0x1, irq=0x0
mt7615e 0000:02:00.0: Load Calibration File /etc/wlan/MT7615_5G_EEPROM.bin
ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a

mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a

mt7615e 0000:01:00.0: N9 Firmware Version: 2.0, Build Time: 20200131181812
mt7615e 0000:02:00.0: N9 Firmware Version: 2.0, Build Time: 20200131181812
mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 201901211613        07
mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 201901211613        07
mtk_soc_eth 1e100000.ethernet: PPE started
device br0 entered promiscuous mode
br0: port 1(vlan1) entered blocking state
br0: port 1(vlan1) entered disabled state
device vlan1 entered promiscuous mode
device eth0 entered promiscuous mode
br0: port 1(vlan1) entered blocking state
br0: port 1(vlan1) entered listening state
device br0 left promiscuous mode
device br0 entered promiscuous mode
device br0 left promiscuous mode
br0: port 2(ath0) entered blocking state
br0: port 2(ath0) entered disabled state
device ath0 entered promiscuous mode
br0: port 2(ath0) entered blocking state
br0: port 2(ath0) entered listening state
br0: port 3(ath1) entered blocking state
br0: port 3(ath1) entered disabled state
device ath1 entered promiscuous mode
br0: port 3(ath1) entered blocking state
br0: port 3(ath1) entered listening state
device vlan2 entered promiscuous mode
fast-classifier (PBR safe v2.1.6b): starting up
fast-classifier: registered
device vlan2 left promiscuous mode
br0: port 1(vlan1) entered learning state
br0: port 2(ath0) entered learning state
br0: port 3(ath1) entered learning state
br0: port 1(vlan1) entered forwarding state
br0: topology change detected, propagating
br0: port 2(ath0) entered forwarding state
br0: topology change detected, propagating
br0: port 3(ath1) entered forwarding state
br0: topology change detected, propagating
br0: port 4(ath1.sta4) entered blocking state
br0: port 4(ath1.sta4) entered disabled state
device ath1.sta4 entered promiscuous mode
br0: port 4(ath1.sta4) entered blocking state
br0: port 4(ath1.sta4) entered listening state
br0: port 4(ath1.sta4) entered learning state
br0: port 4(ath1.sta4) entered forwarding state
br0: topology change detected, sending tcn bpdu