Advertisement
richucj

ctp6_11.log

Nov 6th, 2019
60
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 91.76 KB | None | 0 0
  1. Format: Log Type - Time(microsec) - Message - Optional Info
  2. Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
  3. S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2.C2-00037
  4. S - IMAGE_VARIANT_STRING=DAASANAZA
  5. S - OEM_IMAGE_VERSION_STRING=administrator-p
  6. S - Boot Config, 0x000000e1
  7. B - 1566 - PBL, Start
  8. B - 4542 - bootable_media_detect_entry, Start
  9. B - 170743 - bootable_media_detect_success, Start
  10. B - 170747 - elf_loader_entry, Start
  11. B - 171359 - auth_hash_seg_entry, Start
  12. B - 171618 - auth_hash_seg_exit, Start
  13. B - 185506 - elf_segs_hash_verify_entry, Start
  14. B - 244620 - PBL, End
  15. B - 257267 - SBL1, Start
  16. B - 315675 - boot_flash_init, Start
  17. D - 30 - boot_flash_init, Delta
  18. B - 322324 - boot_config_data_table_init, Start
  19. D - 7015 - boot_config_data_table_init, Delta - (0 Bytes)
  20. B - 333944 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
  21. B - 340105 - pm_device_init, Start
  22. B - 343430 - pm_device_init, TEST - MSM8909 detected
  23. B - 348828 - pm_device_init, INFO - PM8909 is selected
  24. B - 363224 - PM_SET_VAL:Skip
  25. D - 21502 - pm_device_init, Delta
  26. B - 364627 - sbl1_ddr_set_params, Start
  27. B - 367006 - cpr_init, Start
  28. D - 0 - cpr_init, Delta
  29. B - 372679 - Pre_DDR_clock_init, Start
  30. D - 183 - Pre_DDR_clock_init, Delta
  31. D - 0 - sbl1_ddr_set_params, Delta
  32. B - 385642 - pm_driver_init, Start
  33. B - 392260 - --> Charge init
  34. B - 3676 - battery voltage
  35. B - 397842 - boot up
  36. B - 10 - Current status
  37. D - 11895 - pm_driver_init, Delta
  38. B - 409462 - clock_init, Start
  39. D - 152 - clock_init, Delta
  40. B - 410408 - Image Load, Start
  41. D - 25315 - QSEE Image Loaded, Delta - (490096 Bytes)
  42. B - 435753 - Image Load, Start
  43. D - 274 - SEC Image Loaded, Delta - (2048 Bytes)
  44. B - 444019 - sbl1_efs_handle_cookies, Start
  45. D - 671 - sbl1_efs_handle_cookies, Delta
  46. B - 450790 - Image Load, Start
  47. D - 12718 - RPM Image Loaded, Delta - (156564 Bytes)
  48. B - 463569 - Image Load, Start
  49. D - 19154 - APPSBL Image Loaded, Delta - (504460 Bytes)
  50. B - 482754 - QSEE Execution, Start
  51. D - 244 - QSEE Execution, Delta
  52. B - 488488 - SBL1, End
  53. D - 233508 - SBL1, Delta
  54. S - Throughput, 34000 KB/s (1153168 Bytes, 33759 us)
  55. S - DDR Frequency, 400 MHz
  56. Android Bootloader - UART_DM Initialized!!!
  57. [0] [0] welcome to lk
  58.  
  59. [10] [10] platform_init()
  60. [10] [10] target_init()
  61. [50] [50] SDHC Running in HS200 mode
  62. [60] [60] Done initialization of the card
  63. [70] [70] pm8x41_get_is_cold_boot: cold boot
  64. [80] [80] Waiting for the RPM to populate smd channel table
  65. [80] [80] Not able to search the panel:
  66. [180] [180] Config MIPI_VIDEO_PANEL.
  67. [330] [330] Panel CMD: command mode dma test failed
  68. [330] [330] dsi panel init error
  69. [330] [330] Turn off MIPI_VIDEO_PANEL.
  70. [430] [430] Not able to search the panel:
  71. [480] [480] Config MIPI_VIDEO_PANEL.
  72. [630] [630] ++++Read panel signature status = 0x9800
  73. [630] [630] Panic Lut0 0 Lut1 fff Robest 0
  74. [670] [670] Turn on MIPI_VIDEO_PANEL.
  75. [680] [680] Video lane tested successfully
  76. CTRL+C: enter instruction mode
  77. CTRL+C: out instruction mode
  78. input FCT : enter instruction mode
  79. [4800] [4800] is_enter_fctmode ch:�
  80. out fct instruction mode
  81. [4810] [4810] Recovery command: 32 normal1
  82. [4810] [4810] Unable to locate /bootselect partition
  83. [4820] [4820] boot_verifier: Device is in ORANGE boot state.
  84. [4820] [4820] Device is unlocked! Skipping verification...
  85. [4830] [4830] Loading boot image (16930816): start
  86. [4940] [4940] Loading boot image (16930816): done
  87. [4940] [4940] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
  88. [4970] [4970] Best match DTB tags 245/00000008/0x00000000/0/1000d/0/0/0/90a4039e/28118
  89. [4980] [4980] Using pmic info 0x1000d/0x0/0x0/0x0 for device 0x1010d/0x0/0x0/0x0
  90. [4990] [4990] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=782490[5010] [5010] Updating device tree: start
  91. [5020] [5020] Updating device tree: done
  92. [5030] [5030] Channel alloc freed
  93. [5040] [5040] Turn off MIPI_VIDEO_PANEL.
  94. [5040] [5040] Continuous splash enabled, keeping panel alive.
  95. [5040] [5040] booting linux @ 0x80008000, ramdisk @ 0x82000000 (1350260), tags/device tree @ 0x81e00000
  96. [ 0.000000] Booting Linux on physical CPU 0x0
  97. [ 0.000000] Initializing cgroup subsys cpu
  98. [ 0.000000] Initializing cgroup subsys cpuacct
  99. [ 0.000000] Linux version 3.10.49-gc25540a-00044-gbf65be3-dirty (BspDeveloper2@BspDeveloper2) (gcc version 4.8 (GCC) ) #3 SMP PREEMPT Wed Nov 6 13:24:00 IST 2019
  100. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  101. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  102. [ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8909 (Flattened Device Tree), model: Qualcomm Technologies, Inc. MSM8909-PM8909 1GB MTP
  103. [ 0.000000] cma: Found external_image__region@0, memory base 0x87a00000, size 6 MiB, limit 0xffffffff
  104. [ 0.000000] cma: Found modem_adsp_region@0, memory base 0x88000000, size 85 MiB, limit 0xffffffff
  105. [ 0.000000] cma: Found pheripheral_region@0, memory base 0x8d500000, size 7 MiB, limit 0xffffffff
  106. [ 0.000000] cma: Found venus_qseecom_region@0, memory base 0x00000000, size 6 MiB, limit 0x90000000
  107. [ 0.000000] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff
  108. [ 0.000000] cma: Found splash_region@83000000, memory base 0x83000000, size 12 MiB, limit 0xffffffff
  109. [ 0.000000] cma: CMA: reserved 6 MiB at 0x87a00000 for external_image_mem
  110. [ 0.000000] cma: CMA: reserved 85 MiB at 0x88000000 for modem_adsp_mem
  111. [ 0.000000] cma: CMA: reserved 7 MiB at 0x8d500000 for peripheral_mem
  112. [ 0.000000] cma: CMA: reserved 8 MiB at 0x8f800000 for venus_qseecom_mem
  113. [ 0.000000] cma: CMA: reserved 4 MiB at 0xff800000 for audio_mem
  114. [ 0.000000] cma: CMA: reserved 12 MiB at 0x83000000 for cont_splash_mem
  115. [ 0.000000] cma: CMA: reserved 8 MiB at 0xaf000000 for default region
  116. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  117. [ 0.000000] PERCPU: Embedded 14 pages/cpu @c6c54000 s33472 r8192 d15680 u57344
  118. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 494639
  119. [ 0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=7824900.sdhci androidboot.serialno=3122bcdb androidboot.baseband=msm mdss_mdp3.panel=1:dsi:0:qcom,mdss_dsi_ili9881c_720p_video:1:none
  120. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  121. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  122. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  123. [ 0.000000] Memory: 1893768K/1996796K available (10541K kernel code, 1078K rwdata, 4600K rodata, 1420K init, 1349K bss, 103028K reserved, 1314812K highmem)
  124. [ 0.000000] Virtual kernel memory layout:
  125. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  126. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  127. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  128. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  129. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  130. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  131. [ 0.000000] .text : 0xc0008000 - 0xc0fc96f4 (16134 kB)
  132. [ 0.000000] .init : 0xc1000000 - 0xc11632c0 (1421 kB)
  133. [ 0.000000] .data : 0xc1164000 - 0xc127199c (1079 kB)
  134. [ 0.000000] .bss : 0xc1271a60 - 0xc13c2fe4 (1350 kB)
  135. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  136. [ 0.000000] HMP scheduling enabled.
  137. [ 0.000000] Preemptible hierarchical RCU implementation.
  138. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  139. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  140. [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  141. [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  142. [ 0.000000] Switching to timer-based delay loop
  143. [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
  144. [ 0.000000] Console: colour dummy device 80x30
  145. [ 0.000000] kmemleak: Kernel memory leak detector disabled
  146. [ 0.000839] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  147. [ 0.000858] pid_max: default: 32768 minimum: 301
  148. [ 0.001222] Security Framework initialized
  149. [ 0.001266] SELinux: Initializing.
  150. [ 0.001550] Mount-cache hash table entries: 512
  151. [ 0.003231] Initializing cgroup subsys debug
  152. [ 0.003252] Initializing cgroup subsys freezer
  153. [ 0.003308] CPU: Testing write buffer coherency: ok
  154. [ 0.004158] /cpus/cpu@0 missing clock-frequency property
  155. [ 0.004181] /cpus/cpu@1 missing clock-frequency property
  156. [ 0.004201] /cpus/cpu@2 missing clock-frequency property
  157. [ 0.004221] /cpus/cpu@3 missing clock-frequency property
  158. [ 0.004237] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  159. [ 0.004394] Setting up static identity map for 0xc0ab11f8 - 0xc0ab1250
  160. [ 0.006491] ftrace: Allocated trace_printk buffers
  161. [ 0.031392] MSM Memory Dump base table set up
  162. [ 0.031480] MSM Memory Dump apps data table set up
  163. [ 0.031528] Configuring XPU violations to be fatal errors
  164. [ 0.041470] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  165. [ 0.051478] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  166. [ 0.061240] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  167. [ 0.061542] Brought up 4 CPUs
  168. [ 0.061574] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  169. [ 0.061584] CPU: All CPU(s) started in SVC mode.
  170. [ 0.083450] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  171. [ 0.083484] ------------[ cut here ]------------
  172. [ 0.083512] WARNING: at /home/nvme/sc20/kernel/fs/proc/generic.c:102 __xlate_proc_name+0xa0/0xb4()
  173. [ 0.083522] name 'cpu/vfp_bounce'
  174. [ 0.083529] Modules linked in:
  175. [ 0.083548] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.49-gc25540a-00044-gbf65be3-dirty #3
  176. [ 0.083578] [<c010be54>] (unwind_backtrace+0x0/0x11c) from [<c0109a04>] (show_stack+0x10/0x14)
  177. [ 0.083607] [<c0109a04>] (show_stack+0x10/0x14) from [<c0121784>] (warn_slowpath_common+0x4c/0x6c)
  178. [ 0.083632] [<c0121784>] (warn_slowpath_common+0x4c/0x6c) from [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c)
  179. [ 0.083658] [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c) from [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4)
  180. [ 0.083681] [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4) from [<c024ba6c>] (__proc_create+0x4c/0xf4)
  181. [ 0.083703] [<c024ba6c>] (__proc_create+0x4c/0xf4) from [<c024be50>] (proc_create_data+0x58/0x98)
  182. [ 0.083730] [<c024be50>] (proc_create_data+0x58/0x98) from [<c1002e34>] (vfp_init+0x16c/0x1d8)
  183. [ 0.083754] [<c1002e34>] (vfp_init+0x16c/0x1d8) from [<c0100670>] (do_one_initcall+0xb8/0x160)
  184. [ 0.083778] [<c0100670>] (do_one_initcall+0xb8/0x160) from [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0)
  185. [ 0.083803] [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0) from [<c0a9708c>] (kernel_init+0x8/0xe4)
  186. [ 0.083827] [<c0a9708c>] (kernel_init+0x8/0xe4) from [<c0105ff8>] (ret_from_fork+0x14/0x3c)
  187. [ 0.083875] ---[ end trace da227214a82491b7 ]---
  188. [ 0.083885] Failed to create procfs node for VFP bounce reporting
  189. [ 0.087440] pinctrl core: initialized pinctrl subsystem
  190. [ 0.088070] regulator-dummy: no parameters
  191. [ 0.103739] NET: Registered protocol family 16
  192. [ 0.118126] DMA: preallocated 256 KiB pool for atomic coherent allocations
  193. [ 0.186193] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
  194. [ 0.195236] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
  195. [ 0.195640] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
  196. [ 0.198134] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
  197. [ 0.202904] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
  198. [ 0.203282] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
  199. [ 0.216672] KPI: Bootloader start count = 18390
  200. [ 0.216688] KPI: Bootloader end count = 184112
  201. [ 0.216698] KPI: Bootloader display count = 40376
  202. [ 0.216708] KPI: Bootloader load kernel count = 3563
  203. [ 0.216718] KPI: Kernel MPM timestamp = 281672
  204. [ 0.216727] KPI: Kernel MPM Clock frequency = 32768
  205. [ 0.216758] socinfo_print: v10, id=245, ver=2.0, raw_id=2400, raw_ver=1, hw_plat=8, hw_plat_ver=65536
  206. [ 0.216758] accessory_chip=0, hw_plat_subtype=0, pmic_model=65549, pmic_die_revision=65537 foundry_id=1 serial_number=270169395
  207. [ 0.218961] smd_channel_probe_worker: allocation table not initialized
  208. [ 0.218984] smd_channel_probe_worker: allocation table not initialized
  209. [ 0.226113] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  210. [ 0.226128] hw-breakpoint: maximum watchpoint size is 8 bytes.
  211. [ 0.226756] msm_mpm_dev_probe(): Cannot get clk resource for XO
  212. [ 0.226792] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
  213. [ 0.227356] msm-jtag-fuse 5e01c.jtagfuse: JTag Fuse initialized
  214. [ 0.229503] pm8909_s1_corner: 0 <--> 0 mV at 0 mV normal idle
  215. [ 0.230445] pm8909_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  216. [ 0.231290] pm8909_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  217. [ 0.232100] pm8909_s1_corner_so: 0 <--> 0 mV at 0 mV normal idle
  218. [ 0.232920] pm8909_s2: 1850 mV normal idle
  219. [ 0.233743] pm8909_l1: 1000 mV normal idle
  220. [ 0.234569] pm8909_l2: 1200 mV normal idle
  221. [ 0.235366] pm8909_l3: 500 <--> 1350 mV at 0 mV normal idle
  222. [ 0.236135] pm8909_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  223. [ 0.236875] pm8909_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
  224. [ 0.237662] pm8909_l4: 1800 mV normal idle
  225. [ 0.238543] pm8909_l5: 1800 mV normal idle
  226. [ 0.239445] pm8909_l6: 1800 mV normal idle
  227. [ 0.240258] pm8909_l7: 1800 mV normal idle
  228. [ 0.241112] pm8909_l7_ao: 1800 mV normal idle
  229. [ 0.241925] pm8909_l7_so: 1800 mV normal idle
  230. [ 0.242764] pm8909_l8: 2850 <--> 2900 mV at 2850 mV normal idle
  231. [ 0.243556] pm8909_l9: 3000 <--> 3300 mV at 3000 mV normal idle
  232. [ 0.244440] pm8909_l10: 1225 <--> 1300 mV at 1225 mV normal idle
  233. [ 0.245319] pm8909_l11: 1800 <--> 2950 mV at 1800 mV normal idle
  234. [ 0.246117] pm8909_l12: 1800 <--> 2950 mV at 1800 mV normal idle
  235. [ 0.246963] pm8909_l13: 3075 mV normal idle
  236. [ 0.247788] pm8909_l14: 1800 <--> 3000 mV at 1800 mV normal idle
  237. [ 0.248694] pm8909_l15: 1800 <--> 3000 mV at 1800 mV normal idle
  238. [ 0.249463] pm8909_l17: 2800 <--> 2850 mV at 2800 mV normal idle
  239. [ 0.250322] pm8909_l18: 2700 mV normal idle
  240. [ 0.252351] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
  241. [ 0.252449] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
  242. [ 0.252468] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
  243. [ 0.252509] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
  244. [ 0.252777] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
  245. [ 0.252850] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
  246. [ 0.252867] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
  247. [ 0.252899] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
  248. [ 0.253151] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
  249. [ 0.253221] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
  250. [ 0.253239] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
  251. [ 0.253270] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
  252. [ 0.253516] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
  253. [ 0.253588] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
  254. [ 0.253605] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
  255. [ 0.253635] platform 78b7000.i2c: Driver i2c-msm-v2 requests probe deferral
  256. [ 0.253884] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
  257. [ 0.253954] i2c-msm-v2 78b5000.i2c: error on clk_get(core_clk):-517
  258. [ 0.253971] i2c-msm-v2 78b5000.i2c: error probe() failed with err:-517
  259. [ 0.254002] platform 78b5000.i2c: Driver i2c-msm-v2 requests probe deferral
  260. [ 0.259244] sps:sps is ready.
  261. [ 0.271395] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks.
  262. [ 0.291508] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks
  263. [ 0.292737] clock-a7 b011050.qcom,clock-a7: Speed bin: 2 PVS Version: 0
  264. [ 0.295069] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
  265. [ 0.295283] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  266. [ 0.295303] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  267. [ 0.295877] i2c i2c-2: of_i2c: modalias failure on /soc/i2c@78b6000/nq@28
  268. [ 0.296202] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
  269. [ 0.296295] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  270. [ 0.296311] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  271. [ 0.297080] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
  272. [ 0.297171] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  273. [ 0.297187] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  274. [ 0.298602] kworker/u8:2 (51) used greatest stack depth: 6892 bytes left
  275. [ 0.298757] kworker/u8:2 (50) used greatest stack depth: 6676 bytes left
  276. [ 0.299334] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
  277. [ 0.299440] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  278. [ 0.299457] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  279. [ 0.303009] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
  280. [ 0.303216] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  281. [ 0.303235] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  282. [ 0.355518] bio: create slab <bio-0> at 0
  283. [ 0.357983] spk_vreg: no parameters
  284. [ 0.358820] oem_otg_ext_vreg: no parameters
  285. [ 0.360573] SCSI subsystem initialized
  286. [ 0.361652] usbcore: registered new interface driver usbfs
  287. [ 0.361747] usbcore: registered new interface driver hub
  288. [ 0.362027] usbcore: registered new device driver usb
  289. [ 0.362216] media: Linux media interface: v0.10
  290. [ 0.362292] Linux video capture interface: v2.00
  291. [ 0.362617] BATTERY: batterydata_init: Battery-data device created!
  292. [ 0.364313] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  293. [ 0.364607] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
  294. [ 0.364841] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
  295. [ 0.365153] ION heap system created
  296. [ 0.365398] ION heap qsecom created at 0x8f800000 with size 600000
  297. [ 0.365426] ION heap audio created at 0xff800000 with size 314000
  298. [ 0.365450] ION heap pil_2 created at 0x88000000 with size 5500000
  299. [ 0.365927] msm_bus_fabric_init_driver
  300. [ 0.366231] msm_bus_device 580000.ad-hoc-bus: Dev 0
  301. [ 0.366255] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  302. [ 0.366426] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
  303. [ 0.366462] msm_bus_device 580000.ad-hoc-bus: Dev 4096
  304. [ 0.366481] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  305. [ 0.366493] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  306. [ 0.366670] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
  307. [ 0.366706] msm_bus_device 580000.ad-hoc-bus: Dev 1024
  308. [ 0.366725] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  309. [ 0.366737] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  310. [ 0.366919] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
  311. [ 0.366953] msm_bus_device 580000.ad-hoc-bus: Dev 2048
  312. [ 0.366973] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  313. [ 0.367010] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
  314. [ 0.369886] msm_bus_init_clk: Valid node clk node 0 ctx 0
  315. [ 0.369895] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
  316. [ 0.370008] msm_bus_init_clk: Valid node clk node 4096 ctx 1msm_bus_init_clk: Valid node clk node 1024 ctx 0
  317. [ 0.370139] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid Iface clk node 1024
  318. [ 0.370237] msm_bus_init_clk: Valid node clk node 2048 ctx 0msm_bus_init_clk: Valid node clk node 2048 ctx 1
  319. [ 0.384923] gdsc_venus: no parameters
  320. [ 0.385365] gdsc_mdss: no parameters
  321. [ 0.385854] gdsc_vfe: no parameters
  322. [ 0.386328] gdsc_oxili_gx: no parameters
  323. [ 0.386683] gdsc_venus_core0: fast normal
  324. [ 0.387695] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
  325. [ 0.388916] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
  326. [ 0.389957] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f0320000, with 2 ctx banks
  327. [ 0.390999] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0380000, with 22 ctx banks
  328. [ 0.397893] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
  329. [ 0.398095] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
  330. [ 0.398288] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2
  331. [ 0.398472] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
  332. [ 0.398652] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
  333. [ 0.398836] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
  334. [ 0.399020] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
  335. [ 0.399232] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
  336. [ 0.399417] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
  337. [ 0.399672] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
  338. [ 0.399939] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
  339. [ 0.400137] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
  340. [ 0.400326] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
  341. [ 0.400579] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
  342. [ 0.400773] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
  343. [ 0.401106] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
  344. [ 0.401301] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
  345. [ 0.401485] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
  346. [ 0.401669] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
  347. [ 0.401854] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
  348. [ 0.402041] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
  349. [ 0.402223] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10
  350. [ 0.402408] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17
  351. [ 0.402619] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31
  352. [ 0.404347] Advanced Linux Sound Architecture Driver Initialized.
  353. [ 0.405204] Bluetooth: ee855f10
  354. [ 0.405267] NET: Registered protocol family 31
  355. [ 0.405277] Bluetooth: ee855f10
  356. [ 0.405294] Bluetooth: ee855f08Bluetooth: ee855ef8
  357. [ 0.405394] Bluetooth: ee855f00[ 0.405838] cfg80211: Calling CRDA to update world regulatory domain
  358. [ 0.405878] cfg80211: World regulatory domain updated:
  359. [ 0.405887] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  360. [ 0.405896] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  361. [ 0.405906] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  362. [ 0.405915] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  363. [ 0.405924] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  364. [ 0.405934] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  365. [ 0.405943] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  366. [ 0.405952] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  367. [ 0.405961] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  368. [ 0.407015] Switching to clocksource arch_sys_counter
  369. [ 0.471561] NET: Registered protocol family 2
  370. [ 0.472458] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  371. [ 0.473041] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
  372. [ 0.473214] TCP: Hash tables configured (established 8192 bind 8192)
  373. [ 0.473404] TCP: reno registered
  374. [ 0.473493] UDP hash table entries: 512 (order: 2, 24576 bytes)
  375. [ 0.473595] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
  376. [ 0.474033] NET: Registered protocol family 1
  377. [ 0.475082] gcc-mdss-8909 qcom,gcc-mdss.31: Registered GCC MDSS clocks.
  378. [ 0.475810] Trying to unpack rootfs image as initramfs...
  379. [ 0.568356] Freeing initrd memory: 1316K (c2000000 - c2149000)
  380. [ 0.571372] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  381. [ 0.575733] Initialise module verification
  382. [ 0.575803] audit: initializing netlink socket (disabled)
  383. [ 0.575849] type=2000 audit(0.559:1): initialized
  384. [ 0.796976] bounce pool size: 64 pages
  385. [ 0.808299] fuse init (API version 7.23)
  386. [ 0.813738] Key type asymmetric registered
  387. [ 0.813751] Asymmetric key parser 'x509' registered
  388. [ 0.814050] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  389. [ 0.814061] io scheduler noop registered
  390. [ 0.814069] io scheduler deadline registered
  391. [ 0.814103] io scheduler row registered
  392. [ 0.814351] io scheduler cfq registered (default)
  393. [ 0.818614] platform qcom,smp2pgpio-ssr-smp2p-4-in.14: Driver smp2pgpio requests probe deferral
  394. [ 0.818874] platform qcom,smp2pgpio-ssr-smp2p-4-out.15: Driver smp2pgpio requests probe deferral
  395. [ 0.819130] platform qcom,smp2pgpio-ssr-smp2p-1-in.16: Driver smp2pgpio requests probe deferral
  396. [ 0.819388] platform qcom,smp2pgpio-ssr-smp2p-1-out.17: Driver smp2pgpio requests probe deferral
  397. [ 0.823156] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  398. [ 0.823500] mdss_dsi_panel_init: Panel Name = ili9881c 720p video mode dsi panel
  399. [ 0.823919] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
  400. [ 0.823943] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
  401. [ 0.823985] mdss_dsi_parse_panel_features: ulps feature disabled
  402. [ 0.823999] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
  403. [ 0.824010] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
  404. [ 0.824036] mdss_dsi_parse_panel_features:1235, Disp_en gpio not specified
  405. [ 0.824057] mdss_dsi_panel_init: Continuous splash enabled
  406. [ 0.824575] dsi_panel_device_register:1884, TE gpio not specified
  407. [ 0.824592] dsi_panel_device_register: bklt_en gpio not specified
  408. [ 0.824737] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
  409. [ 0.824744] PLL 1 Clock's did not register
  410. [ 0.824772] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f00fc000 ctrl_size=25c phy_base=f00fe500 phy_size=2b0
  411. [ 0.824785] dsi_panel_device_register: Using default BTA for ESD check
  412. [ 0.838072] mdss_register_panel: adding framebuffer device 1ac8000.qcom,mdss_dsi
  413. [ 0.840455] mdss_dsi_status_init: DSI status check interval:5000
  414. [ 0.841896] mdp3_alloc: allocating 12582912 bytes at c3000000 (83000000 phys) for fb 0
  415. [ 0.842257] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
  416. [ 0.842267] mdp3_ctrl_init: mdp3_ctrl_init
  417. [ 0.842377] mdp3 1a00000.qcom,mdss_mdp: Unbalanced pm_runtime_enable!
  418. [ 0.845345] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
  419. [ 0.847991] msm_rpm_log_probe: OK
  420. [ 0.852210] NET: Registered protocol family 27
  421. [ 0.857557] In memshare_probe, Memshare probe success
  422. [ 0.859968] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
  423. [ 0.859997] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
  424. [ 0.861963] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
  425. [ 0.862175] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
  426. [ 0.863608] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  427. [ 0.863650] AXI: get_pdata(): Error: Client name not found
  428. [ 0.863659] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
  429. [ 0.863666] msm_serial_hsl_probe: Bus scaling is disabled
  430. [ 0.863775] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 139) is a MSM
  431. [ 0.863835] msm_hsl_console_setup: console setup on port #0
  432. [ 3.039935] console [ttyHSL0] enabled
  433. [ 3.043943] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
  434. [ 3.049317] AXI: get_pdata(): Error: Client name not found
  435. [ 3.054655] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
  436. [ 3.064153] msm_serial_hsl_probe: Bus scaling is disabled
  437. [ 3.069667] 78b0000.serial: ttyHSL1 at MMIO 0x78b0000 (irq = 140) is a MSM
  438. [ 3.076893] msm_serial_hsl_init: driver initialized
  439. [ 3.096120] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
  440. [ 3.114164] brd: module loaded
  441. [ 3.120614] loop: module loaded
  442. [ 3.123522] apds993x 1-0039: Unable to read cross_talk use default 100
  443. [ 3.267499] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0x5 (ok)
  444. [ 3.275125] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x011363c8 OPER:0x00000010
  445. [ 3.290160] apds993x 1-0039: Neither APDS993x nor APDS990x
  446. [ 3.295556] apds993x 1-0039: Not a valid chip ID
  447. [ 3.301002] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
  448. [ 3.306443] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
  449. [ 3.312157] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  450. [ 3.322031] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0[ 3.328748] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
  451. [ 3.335989] QSEECOM: qseecom_probe: secure app region addr=0x87a00000 size=0x200000
  452. [ 3.345925] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  453. [ 3.351899] i2c-core: driver [tabla-i2c-core] using legacy resume method
  454. [ 3.358746] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  455. [ 3.365469] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  456. [ 3.372572] i2c-core: driver [tasha-i2c-core] using legacy suspend method
  457. [ 3.379187] i2c-core: driver [tasha-i2c-core] using legacy resume method
  458. [ 3.386836] SCSI Media Changer driver v0.25
  459. [ 3.393739] tun: Universal TUN/TAP device driver, 1.6
  460. [ 3.397862] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  461. [ 3.407029] PPP generic driver version 2.4.2
  462. [ 3.410454] PPP BSD Compression module registered
  463. [ 3.414945] PPP Deflate Compression module registered
  464. [ 3.420032] PPP MPPE Compression module registered
  465. [ 3.424755] NET: Registered protocol family 24
  466. [ 3.430332] wcnss_wlan probed in built-in mode
  467. [ 3.437875] usbcore: registered new interface driver asix
  468. [ 3.442313] usbcore: registered new interface driver ax88179_178a
  469. [ 3.448498] usbcore: registered new interface driver cdc_ether
  470. [ 3.454178] usbcore: registered new interface driver net1080
  471. [ 3.459870] usbcore: registered new interface driver cdc_subset
  472. [ 3.465722] usbcore: registered new interface driver zaurus
  473. [ 3.471626] usbcore: registered new interface driver cdc_ncm
  474. [ 3.477769] msm_sharedmem: sharedmem_register_qmi: qmi init successful
  475. [ 3.478402] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
  476. [ 3.478634] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
  477. [ 3.478837] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
  478. [ 3.479427] msm_otg 78d9000.usb: msm_otg probe
  479. [ 3.513481] msm_otg 78d9000.usb: OTG regs = f01f4000
  480. [ 3.520504] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  481. [ 3.525992] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  482. [ 3.532266] ehci-msm2: Qualcomm EHCI Host Controller
  483. [ 3.537155] usbcore: registered new interface driver cdc_acm
  484. [ 3.542136] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  485. [ 3.550268] usbcore: registered new interface driver ccid_bridge
  486. [ 3.556269] ccid_bridge_init: success
  487. [ 3.559870] usbcore: registered new interface driver usb-storage
  488. [ 3.565819] usbcore: registered new interface driver ums-alauda
  489. [ 3.571733] usbcore: registered new interface driver ums-cypress
  490. [ 3.577719] usbcore: registered new interface driver ums-datafab
  491. [ 3.583671] usbcore: registered new interface driver ums-freecom
  492. [ 3.589699] usbcore: registered new interface driver ums-isd200
  493. [ 3.595564] usbcore: registered new interface driver ums-jumpshot
  494. [ 3.601677] usbcore: registered new interface driver ums-karma
  495. [ 3.607491] usbcore: registered new interface driver ums-onetouch
  496. [ 3.613533] usbcore: registered new interface driver ums-sddr09
  497. [ 3.619469] usbcore: registered new interface driver ums-sddr55
  498. [ 3.625338] usbcore: registered new interface driver ums-usbat
  499. [ 3.631342] usbcore: registered new interface driver usbserial
  500. [ 3.636998] usbcore: registered new interface driver qc_csvt
  501. [ 3.642651] usbserial: USB Serial support registered for qc_csvt
  502. [ 3.648650] usbcore: registered new interface driver usb_ehset_test
  503. [ 3.657245] msm_otg 78d9000.usb: phy_reset: success
  504. [ 3.657951] mousedev: PS/2 mouse device common for all mice
  505. [ 3.658134] usbcore: registered new interface driver xpad
  506. [ 3.659813] Goodix-TS 5-005d: +++++++++++++++++for debug++++++++++
  507. [ 3.659881] Goodix-TS 5-005d: ++++power gpio [944]!
  508. [ 3.659890] Goodix-TS 5-005d: ++++IO power_en gpio [923]successfully
  509. [ 3.659925] Goodix-TS 5-005d: Regulator get failed avdd ret=-19
  510. [ 3.659935] Goodix-TS 5-005d: Regulator get failed vdd ret=-19
  511. [ 3.660411] Goodix-TS 5-005d: ++++set sleep power_gpio on
  512. [ 3.660771] Goodix-TS 5-005d: Can not lookup pmx_ts_release pinstate -19
  513. [ 3.797508] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x8 (ok)
  514. [ 3.842175] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000090
  515. [ 3.868847] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000090
  516. [ 3.891717] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000090
  517. [ 3.916733] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000090
  518. [ 3.936997] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000090
  519. [ 3.948424] Goodix-TS 5-005d: init external watchdog failed!
  520. [ 3.962812] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  521. [ 3.974241] Goodix-TS 5-005d: I2C retry: 1
  522. [ 3.990489] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  523. [ 4.001918] Goodix-TS 5-005d: I2C retry: 2
  524. [ 4.020626] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  525. [ 4.032055] Goodix-TS 5-005d: I2C retry: 3
  526. [ 4.045156] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  527. [ 4.056584] Goodix-TS 5-005d: I2C retry: 4
  528. [ 4.068997] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  529. [ 4.080429] Goodix-TS 5-005d: I2C retry: 5
  530. [ 4.084466] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
  531. [ 4.090489] Goodix-TS 5-005d: GTP i2c test failed time 4.
  532. [ 4.126065] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  533. [ 4.137496] Goodix-TS 5-005d: I2C retry: 1
  534. [ 4.161104] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  535. [ 4.172534] Goodix-TS 5-005d: I2C retry: 2
  536. [ 4.185694] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  537. [ 4.197124] Goodix-TS 5-005d: I2C retry: 3
  538. [ 4.210549] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  539. [ 4.221977] Goodix-TS 5-005d: I2C retry: 4
  540. [ 4.235021] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  541. [ 4.246450] Goodix-TS 5-005d: I2C retry: 5
  542. [ 4.250521] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
  543. [ 4.256480] Goodix-TS 5-005d: GTP i2c test failed time 3.
  544. [ 4.295610] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  545. [ 4.307044] Goodix-TS 5-005d: I2C retry: 1
  546. [ 4.321853] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  547. [ 4.333284] Goodix-TS 5-005d: I2C retry: 2
  548. [ 4.346442] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  549. [ 4.357873] Goodix-TS 5-005d: I2C retry: 3
  550. [ 4.370762] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  551. [ 4.382191] Goodix-TS 5-005d: I2C retry: 4
  552. [ 4.394702] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  553. [ 4.406130] Goodix-TS 5-005d: I2C retry: 5
  554. [ 4.410201] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
  555. [ 4.416160] Goodix-TS 5-005d: GTP i2c test failed time 2.
  556. [ 4.456361] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  557. [ 4.467791] Goodix-TS 5-005d: I2C retry: 1
  558. [ 4.480361] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  559. [ 4.491790] Goodix-TS 5-005d: I2C retry: 2
  560. [ 4.504951] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  561. [ 4.516380] Goodix-TS 5-005d: I2C retry: 3
  562. [ 4.529267] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  563. [ 4.540697] Goodix-TS 5-005d: I2C retry: 4
  564. [ 4.552950] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  565. [ 4.564378] Goodix-TS 5-005d: I2C retry: 5
  566. [ 4.568451] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
  567. [ 4.574408] Goodix-TS 5-005d: GTP i2c test failed time 1.
  568. [ 4.615879] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  569. [ 4.627308] Goodix-TS 5-005d: I2C retry: 1
  570. [ 4.639556] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  571. [ 4.650985] Goodix-TS 5-005d: I2C retry: 2
  572. [ 4.664145] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  573. [ 4.675574] Goodix-TS 5-005d: I2C retry: 3
  574. [ 4.688517] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  575. [ 4.699947] Goodix-TS 5-005d: I2C retry: 4
  576. [ 4.712521] i2c-msm-v2 78b9000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x081321d0 OPER:0x00000010
  577. [ 4.723949] Goodix-TS 5-005d: I2C retry: 5
  578. [ 4.728022] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
  579. [ 4.733979] Goodix-TS 5-005d: GTP i2c test failed time 0.
  580. [ 4.767119] Goodix-TS 5-005d: I2C communication ERROR!
  581. [ 4.771381] Goodix-TS: probe of 5-005d failed with error -2
  582. [ 4.798071] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x30 MSTR_STS:0x011363c8 OPER:0x00000010
  583. [ 4.812818] mmc3416x 1-0030: read reg 6 failed.(-107)
  584. [ 4.817832] mmc3416x 1-0030: Check device failed
  585. [ 4.822847] mmc3416x: probe of 1-0030 failed with error -107
  586. [ 4.828190] stk3x1x_probe: driver version = 3.4.4ts
  587. [ 4.832979] stk_ps 1-0048: stk3x1x_probe: stk3x1x_parse_dt ret=0
  588. [ 4.839190] input: stk3x1x-ls as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input0
  589. [ 4.847050] input: proximity as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input1
  590. [ 4.856510] mpu6050 1-0068: Regulator get failed vi2c ret=-19
  591. [ 4.967333] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x68 MSTR_STS:0x011363c8 OPER:0x00000010
  592. [ 4.982087] mpu6050 1-0068: Fail to read power mode, ret=-107
  593. [ 4.987789] mpu6050 1-0068: Cannot get invalid chip type
  594. [ 4.993187] mpu6050 1-0068: Probe device return error-107
  595. [ 4.998508] mpu6050: probe of 1-0068 failed with error -107
  596. [ 5.004069] AKM compass driver: initialize.
  597. [ 5.097301] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000090
  598. [ 5.111965] akm8963 1-000c: akm_i2c_txdata: transfer failed.
  599. [ 5.117616] akm8963 1-000c: AKECS_Set_PowerDown: Can not set to powerdown mode.
  600. [ 5.125008] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000010
  601. [ 5.140525] akm8963 1-000c: akm_i2c_rxdata: transfer failed.
  602. [ 5.146232] akm8963: probe of 1-000c failed with error -107
  603. [ 5.151779] AKM compass driver: initialize.
  604. [ 5.155853] i2c-core: driver [bma2x2-accel] using legacy suspend method
  605. [ 5.162462] i2c-core: driver [bma2x2-accel] using legacy resume method
  606. [ 5.169094] i2c-core: driver [bmi160] using legacy suspend method
  607. [ 5.175007] i2c-core: driver [bmi160] using legacy resume method
  608. [ 5.182078] qcom,qpnp-rtc qpnp-rtc-6: rtc core: registered qpnp_rtc as rtc0
  609. [ 5.188334] i2c /dev entries driver
  610. [ 5.195866] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
  611. [ 5.206093] msm_actuator_i2c_probe:1313 msm_actuator_i2c_probe: succeeded
  612. [ 5.212539] LED trigger flashlight-trigger failed to register (-17)
  613. [ 5.219224] adp1660 i2c_add_driver success
  614. [ 5.222532] msm_flash_init_module:1114 Enter
  615. [ 5.226941] msm_flash_lm3642_init entry
  616. [ 5.231620] msm_eeprom_parse_memory_map: pageen not needed
  617. [ 5.236078] msm_eeprom_parse_memory_map: pageen not needed
  618. [ 5.241639] msm_eeprom_parse_memory_map: pageen not needed
  619. [ 5.278396] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok)
  620. [ 5.285666] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x36 MSTR_STS:0x0d1300c8 OPER:0x00000090
  621. [ 5.317120] read_eeprom_memory: page write failed
  622. [ 5.320782] msm_eeprom_i2c_probe read_eeprom_memory failed
  623. [ 5.357048] msm_eeprom_i2c_probe failed! rc = -107
  624. [ 5.360844] msm_eeprom: probe of 3-006c failed with error -107
  625. [ 5.368777] g_sctrl[0] edcba800
  626. [ 5.370918] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group cam_sensor_front
  627. [ 5.378835] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "cam_sensor_front"
  628. [ 5.387573] pinmux core: msm-pinctrl does not support function cam_sensor_front-func
  629. [ 5.395184] msm-tlmm-pinctrl 1000000.pinctrl: invalid function cam_sensor_front-func in map table
  630. [ 5.404086] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group cam-sensor-front-sleep
  631. [ 5.412491] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "cam-sensor-front-sleep"
  632. [ 5.421724] pinmux core: msm-pinctrl does not support function cam-sensor-front-sleep-func
  633. [ 5.429938] msm-tlmm-pinctrl 1000000.pinctrl: invalid function cam-sensor-front-sleep-func in map table
  634. [ 5.439468] g_sctrl[1] edcbb000
  635. [ 5.442284] gc0310_init_module:487
  636. [ 5.450001] BMS: bms_get_adc: vadc not found - defer probe rc=-517
  637. [ 5.455140] BMS: qpnp_vm_bms_probe: Failed to get adc rc=-517
  638. [ 5.461001] spmi qpnp-vm-bms-10: Driver qcom,qpnp-vm-bms requests probe deferral
  639. [ 5.468486] CHG: qpnp_lbc_main_probe: Failed to read DT properties rc=-517
  640. [ 5.475119] spmi qpnp-linear-charger-8: Driver qcom,qpnp-linear-charger requests probe deferral
  641. [ 5.484559] unable to find DT imem DLOAD mode node
  642. [ 5.488925] unable to find DT imem EDLOAD mode node
  643. [ 5.494809] qpnp_vadc_get_temp: VADC read error with -517
  644. [ 5.499226] thermal thermal_zone0: failed to read out thermal zone 0
  645. [ 5.505717] qpnp_vadc_get_temp: VADC read error with -517
  646. [ 5.510978] thermal thermal_zone1: failed to read out thermal zone 1
  647. [ 5.517527] qpnp_vadc_get_temp: VADC read error with -517
  648. [ 5.522608] thermal thermal_zone2: failed to read out thermal zone 2
  649. [ 5.548085] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  650. [ 5.555714] device-mapper: req-crypt: dm-req-crypt successfully initalized.
  651. [ 5.555714]
  652. [ 5.564273] cpuidle: using governor ladder
  653. [ 5.568021] cpuidle: using governor menu
  654. [ 5.571931] sdhci: Secure Digital Host Controller Interface driver
  655. [ 5.578081] sdhci: Copyright(c) Pierre Ossman
  656. [ 5.582391] sdhci-pltfm: SDHCI platform and OF driver helper
  657. [ 5.595019] sdhci_msm 7824900.sdhci: host_use_default_qos = 1
  658. [ 5.599777] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
  659. [ 5.608350] sdhci_msm 7824900.sdhci: dma_latency = 2
  660. [ 5.613355] sdhci_msm 7824900.sdhci: dma_latency = 241
  661. [ 5.618592] sdhci_msm 7824900.sdhci: dma_latency = 501
  662. [ 5.623774] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
  663. [ 5.633174] sdhci_msm 7824900.sdhci: dma_latency = 200
  664. [ 5.638384] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
  665. [ 5.647757] sdhci_msm 7824900.sdhci: dma_latency = 200
  666. [ 5.652939] sdhci_msm 7824900.sdhci: Host using default pm_qos
  667. [ 5.660085] mmc0: no vqmmc regulator found
  668. [ 5.663144] mmc0: no vmmc regulator found
  669. [ 5.696619] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
  670. [ 5.716635] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
  671. [ 5.721388] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
  672. [ 5.729970] sdhci_msm 7864900.sdhci: dma_latency = 2
  673. [ 5.734974] sdhci_msm 7864900.sdhci: dma_latency = 241
  674. [ 5.740211] sdhci_msm 7864900.sdhci: dma_latency = 501
  675. [ 5.745396] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
  676. [ 5.754793] sdhci_msm 7864900.sdhci: dma_latency = 200
  677. [ 5.760002] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
  678. [ 5.769470] sdhci_msm 7864900.sdhci: dma_latency = 200
  679. [ 5.774561] sdhci_msm 7864900.sdhci: Host using default pm_qos
  680. [ 5.781991] mmc1: no vqmmc regulator found
  681. [ 5.785050] mmc1: no vmmc regulator found
  682. [ 5.813921] mmc0: BKOPS_EN bit = 0
  683. [ 5.819077] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
  684. [ 5.826353] qcom,leds-qpnp: probe of leds-qpnp-7 failed with error -10
  685. [ 5.840180] mmc0: new HS200 MMC card at address 0001
  686. [ 5.847469] mmcblk0: mmc0:0001 HAG4a2 14.6 GiB
  687. [ 5.851578] mmcblk0rpmb: mmc0:0001 HAG4a2 partition 3 4.00 MiB
  688. [ 5.857678] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
  689. [ 5.863759] qce 720000.qcedev: CE device = 0x0
  690. [ 5.863759] , IO base, CE = 0xf0680000
  691. [ 5.863759] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  692. [ 5.863759] IO base BAM = 0x (null)
  693. [ 5.863759] BAM IRQ 239
  694. [ 5.863759] Engines Availability = 0x2010853
  695. [ 5.866351] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
  696. [ 5.900851] sps:BAM 0x00704000 is registered.
  697. [ 5.910147] sps:BAM 0x00704000 (va:0xf06c0000) enabled: ver:0x25, number of pipes:8
  698. [ 5.922034] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
  699. [ 5.929360] qcedev: FIPS140-2 Known Answer Tests : Skipped
  700. [ 5.936274] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
  701. [ 5.942706] qcrypto 720000.qcrypto: CE device = 0x0
  702. [ 5.942706] , IO base, CE = 0xf07c0000
  703. [ 5.942706] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
  704. [ 5.942706] IO base BAM = 0x (null)
  705. [ 5.942706] BAM IRQ 239
  706. [ 5.942706] Engines Availability = 0x2010853
  707. [ 5.976906] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
  708. [ 5.984467] qcrypto 720000.qcrypto: qcrypto-ecb-aes
  709. [ 5.988695] qcrypto 720000.qcrypto: qcrypto-cbc-aes
  710. [ 5.993480] qcrypto 720000.qcrypto: qcrypto-ctr-aes
  711. [ 5.998383] qcrypto 720000.qcrypto: qcrypto-ecb-des
  712. [ 6.003198] qcrypto 720000.qcrypto: qcrypto-cbc-des
  713. [ 6.008105] qcrypto 720000.qcrypto: qcrypto-ecb-3des
  714. [ 6.013015] qcrypto 720000.qcrypto: qcrypto-cbc-3des
  715. [ 6.018084] qcrypto 720000.qcrypto: qcrypto-xts-aes
  716. [ 6.022807] qcrypto 720000.qcrypto: qcrypto-sha1
  717. [ 6.027449] qcrypto 720000.qcrypto: qcrypto-sha256
  718. [ 6.032271] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  719. [ 6.038396] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  720. [ 6.044510] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  721. [ 6.050848] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  722. [ 6.057134] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  723. [ 6.063440] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  724. [ 6.069889] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
  725. [ 6.074890] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
  726. [ 6.080135] qcrypto 720000.qcrypto: qcrypto-aes-ccm
  727. [ 6.084952] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
  728. [ 6.090328] qcrypto: FIPS140-2 Known Answer Tests: Skipped
  729. [ 6.096826] usbcore: registered new interface driver usbhid
  730. [ 6.101396] usbhid: USB HID core driver
  731. [ 6.105873] zram: Created 1 device(s) ...
  732. [ 6.110110] ashmem: initialized
  733. [ 6.113461] logger: created 256K log 'log_main'
  734. [ 6.118225] logger: created 256K log 'log_events'
  735. [ 6.122998] logger: created 256K log 'log_radio'
  736. [ 6.127826] logger: created 256K log 'log_system'
  737. [ 6.132483] sps:BAM 0x078c4000 is registered.
  738. [ 6.136121] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
  739. [ 6.146403] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
  740. [ 6.158706] input: qpnp_pon as /devices/virtual/input/input2
  741. [ 6.166033] PMIC@SID0: PM8909 v1.1 options: 0, 2, 0, 0
  742. [ 6.188105] populate_opp_table: clock-a7: OPP tables populated (cpu 3)
  743. [ 6.193601] print_opp_table: clock_cpu: a7: OPP voltage for 400000000: 4
  744. [ 6.200379] print_opp_table: clock_cpu: a7: OPP voltage for 1094400000: 7
  745. [ 6.208808] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
  746. [ 6.214917] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
  747. [ 6.224621] devfreq qcom,cpubw.32: Couldn't update frequency transition information.
  748. [ 6.236143] coresight-fuse 5e01c.fuse: Fuse initialized
  749. [ 6.241122] coresight-cti 810000.cti: CTI initialized
  750. [ 6.245577] coresight-cti 811000.cti: CTI initialized
  751. [ 6.250766] coresight-cti 812000.cti: CTI initialized
  752. [ 6.255670] coresight-cti 813000.cti: CTI initialized
  753. [ 6.260756] coresight-cti 814000.cti: CTI initialized
  754. [ 6.265736] coresight-cti 815000.cti: CTI initialized
  755. [ 6.271141] coresight-cti 816000.cti: CTI initialized
  756. [ 6.275841] coresight-cti 817000.cti: CTI initialized
  757. [ 6.280941] coresight-cti 818000.cti: CTI initialized
  758. [ 6.285868] coresight-cti 851000.cti: CTI initialized
  759. [ 6.290972] coresight-cti 852000.cti: CTI initialized
  760. [ 6.295966] coresight-cti 853000.cti: CTI initialized
  761. [ 6.301025] coresight-cti 854000.cti: CTI initialized
  762. [ 6.306052] coresight-cti 83c000.cti: CTI initialized
  763. [ 6.311141] coresight-cti 838000.cti: CTI initialized
  764. [ 6.316090] coresight-cti 835000.cti: CTI initialized
  765. [ 6.321228] coresight-cti 830000.cti: CTI initialized
  766. [ 6.326668] coresight-csr 801000.csr: CSR initialized
  767. [ 6.331751] coresight-tmc 826000.tmc: Byte Counter feature enabled
  768. [ 6.337225] sps:BAM 0x00884000 is registered.
  769. [ 6.341579] coresight-tmc 826000.tmc: TMC initialized
  770. [ 6.346909] coresight-tmc 825000.tmc: TMC initialized
  771. [ 6.354139] nidnt boot config: 0
  772. [ 6.357867] coresight-tpiu 820000.tpiu: NIDnT on SDCARD only mode
  773. [ 6.363054] coresight-tpiu 820000.tpiu: TPIU initialized
  774. [ 6.369089] coresight-funnel 821000.funnel: FUNNEL initialized
  775. [ 6.374200] coresight-funnel 869000.funnel: FUNNEL initialized
  776. [ 6.380131] coresight-funnel 868000.funnel: FUNNEL initialized
  777. [ 6.385873] coresight-funnel 855000.funnel: FUNNEL initialized
  778. [ 6.392151] coresight-replicator 824000.replicator: REPLICATOR initialized
  779. [ 6.399052] coresight-dbgui 86d000.dbgui: DebugUI capture enabled
  780. [ 6.404592] coresight-dbgui 86d000.dbgui: DebugUI initializaed
  781. [ 6.411060] coresight-stm 802000.stm: STM initialized
  782. [ 6.415873] coresight-hwevent 86c000.hwevent: Hardware Event driver initialized
  783. [ 6.423499] coresight-etm 84c000.etm: ETM initialized
  784. [ 6.428043] coresight-etm 84d000.etm: ETM initialized
  785. [ 6.433035] coresight-etm 84e000.etm: ETM initialized
  786. [ 6.438187] coresight-etm 84f000.etm: ETM initialized
  787. [ 6.443843] coresight-modem-etm modem_etm0.26: Modem ETM initialized
  788. [ 6.450249] coresight-wcn-etm wcn_etm0.25: Wireless ETM initialized
  789. [ 6.456488] coresight-rpm-etm rpm_etm0.24: RPM ETM initialized
  790. [ 6.462219] coresight-qpdi 1941000.qpdi: CoreSight QPDI driver initialized
  791. [ 6.468858] usbcore: registered new interface driver snd-usb-audio
  792. [ 6.475622] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
  793. [ 6.482344] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  794. [ 6.505855] msm-pcm-lpa qcom,msm-pcm-lpa.46: msm_pcm_probe: dev name qcom,msm-pcm-lpa.46
  795. [ 6.514027] platform qcom,msm-voip-dsp.48: Driver msm-voip-dsp requests probe deferral
  796. [ 6.521517] platform qcom,msm-pcm-voice.49: Driver msm-pcm-voice requests probe deferral
  797. [ 6.537922] msm8x16-asoc-wcd sound.71: default codec configured
  798. [ 6.544731] msm8x16-asoc-wcd sound.71: ASoC: platform (null) not registered
  799. [ 6.550769] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
  800. [ 6.557757] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
  801. [ 6.565191] u32 classifier
  802. [ 6.567490] Actions configured
  803. [ 6.570797] Netfilter messages via NETLINK v0.30.
  804. [ 6.575581] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  805. [ 6.582535] ctnetlink v0.93: registering with nfnetlink.
  806. [ 6.587662] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  807. [ 6.593794] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  808. [ 6.600265] xt_time: kernel timezone is -0000
  809. [ 6.604345] ip_tables: (C) 2000-2006 Netfilter Core Team
  810. [ 6.609624] arp_tables: (C) 2002 David S. Miller
  811. [ 6.613941] TCP: cubic registered
  812. [ 6.617264] Initializing XFRM netlink socket
  813. [ 6.622397] NET: Registered protocol family 10
  814. [ 6.626982] mip6: Mobile IPv6
  815. [ 6.629072] ip6_tables: (C) 2000-2006 Netfilter Core Team
  816. [ 6.634563] sit: IPv6 over IPv4 tunneling driver
  817. [ 6.639665] NET: Registered protocol family 17
  818. [ 6.643352] NET: Registered protocol family 15
  819. [ 6.647982] Bridge firewalling registered
  820. [ 6.651750] Ebtables v2.0 registered
  821. [ 6.655652] Bluetooth: ee855ef0
  822. [ 6.658336] Bluetooth: ee855ef0Bluetooth: ee855f00
  823. [ 6.663026] Bluetooth: ee855ed8Bluetooth: ee855ed8
  824. [ 6.667868] Bluetooth: ee855ed0Bluetooth: ee855f10
  825. [ 6.672583] Bluetooth: ee855f10[ 6.675737] l2tp_core: L2TP core driver, V2.0
  826. [ 6.680159] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  827. [ 6.684812] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  828. [ 6.690447] l2tp_netlink: L2TP netlink interface
  829. [ 6.695015] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  830. [ 6.700977] l2tp_debugfs: L2TP debugfs support
  831. [ 6.705298] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  832. [ 6.722657] of_batterydata_read_data: palladium_1500mah loaded
  833. [ 6.739454] BMS: bms_load_hw_defaults: BMS_EN=1 Sample_Interval-S1=[100]S2=[70] Sample_Count-S1=[256]S2=[128] Fifo_Length-S1=[5]S2=[5] FSM_state=2
  834. [ 6.759367] BMS: calculate_initial_soc: warm_reset=0 est_ocv=0 shutdown_soc_invalid=0 shutdown_ocv=3698000 shutdown_soc=9 last_soc=9 calculated_soc=14 last_ocv_uv=3698000
  835. [ 6.787797] BMS: qpnp_vm_bms_probe: probe success: soc=9 vbatt=3555850 ocv=3698000 warm_reset=0
  836. [ 6.892322] CHG: qpnp_lbc_main_probe: Probe chg_dis=0 bpd=1 usb=1 batt_pres=1 batt_volt=3569099 soc=9
  837. [ 6.900693] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
  838. [ 6.908254] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  839. [ 6.929534] msm8x16-asoc-wcd sound.71: default codec configured
  840. [ 6.936577] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
  841. [ 6.942420] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
  842. [ 6.949344] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
  843. [ 6.956398] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
  844. [ 6.964056] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  845. [ 6.972438] Registering SWP/SWPB emulation handler
  846. [ 6.977631] Loading module verification certificates
  847. [ 6.988098] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: f9361c7b48d383dd47e2cb01914a510385155f43'
  848. [ 7.128620] oem_otg_ext_vreg: disabling
  849. [ 7.131424] spk_vreg: disabling
  850. [ 7.134584] regulator-dummy: disabling
  851. [ 7.139208] msm8x16-asoc-wcd sound.71: default codec configured
  852. [ 7.146307] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
  853. [ 7.152128] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
  854. [ 7.159066] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
  855. [ 7.166143] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
  856. [ 7.173782] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  857. [ 7.183320] file system registered
  858. [ 7.185767] mbim_init: initialize 1 instances
  859. [ 7.190173] mbim_init: Initialized 1 ports
  860. [ 7.194100] mbim_bam_setup: no_ports:1
  861. [ 7.198075] mbim_bam_setup: Initialized 1 ports
  862. [ 7.204353] rndis_qc_init: initialize rndis QC instance
  863. [ 7.209334] android_usb gadget: Mass Storage Function, version: 2009/09/11
  864. [ 7.215397] android_usb gadget: Number of LUNs=1
  865. [ 7.220044] lun0: LUN: removable file: (no medium)
  866. [ 7.225414] android_usb gadget: android_usb ready
  867. [ 7.229640] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
  868. [ 7.235511] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  869. [ 7.243114] msm8x16-asoc-wcd sound.71: default codec configured
  870. [ 7.245055] input: gpio-keys as /devices/soc.0/gpio_keys.70/input/input3
  871. [ 7.254891] qcom,qpnp-rtc qpnp-rtc-6: setting system clock to 1970-01-01 00:01:56 UTC (116)
  872. [ 7.257025] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
  873. [ 7.257123] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
  874. [ 7.257267] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
  875. [ 7.257393] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
  876. [ 7.257460] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  877. [ 7.258173] msm8x16-asoc-wcd sound.71: default codec configured
  878. [ 7.260263] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
  879. [ 7.260307] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
  880. [ 7.260440] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
  881. [ 7.327502] msm_thermal:interrupt_mode_init Interrupt mode init
  882. [ 7.334255] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
  883. [ 7.334972] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
  884. [ 7.349431] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  885. [ 7.357700] msm8x16-asoc-wcd sound.71: default codec configured
  886. [ 7.360198] led_gpio_flash_probe:probe successfully!
  887. [ 7.364398] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully
  888. [ 7.365153] ---+++ get pwm-freq prop failed
  889. [ 7.365156] ---+++ get pwm-duty prop failed
  890. [ 7.365278] ---+++ gpio_clk_probe succeeded
  891. [ 7.365664] clock_late_init: Removing enables held for handed-off clocks
  892. [ 7.397657] ALSA device list:
  893. [ 7.397767] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
  894. [ 7.397817] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
  895. [ 7.397961] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
  896. [ 7.398105] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
  897. [ 7.398172] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
  898. [ 7.398923] msm8x16-asoc-wcd sound.71: default codec configured
  899. [ 7.401072] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
  900. [ 7.401117] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
  901. [ 7.401252] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
  902. [ 7.462355] No soundcards fo�[ 7.466862] Freeing unused kernel memory: 396K (c1100000 - c1163000)
  903. [ 7.476371] init: init first stage started!
  904. [ 7.619302] type=1403 audit(116.869:2): policy loaded auid=4294967295 ses=4294967295
  905. [ 7.627460] type=1404 audit(116.879:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  906. [ 7.747507] init: (Initializing SELinux enforcing took 0.27s.)
  907. [ 7.762134] init: init second stage started!
  908. [ 7.778934] init: property_set("ro.boot.bootdevice", "7824900.sdhci") failed
  909. [ 7.793359] init: Running restorecon...
  910. [ 8.098777] init: waitpid failed: No child processes
  911. [ 8.103453] init: (Loading properties from /default.prop took 0.00s.)
  912. [ 8.114078] init: /init.rc: 679: invalid keyword 'setprop'
  913. [ 8.118722] init: /init.rc: 680: invalid keyword 'chmod'
  914. [ 8.123846] init: /init.rc: 681: invalid keyword 'chown'
  915. [ 8.129434] init: (Parsing /init.environ.rc took 0.00s.)
  916. [ 8.135690] init: (Parsing /init.usb.rc took 0.00s.)
  917. [ 8.144760] init: /init.qcom.rc: 582: user requires 1 argument
  918. [ 8.152500] init: ignored duplicate definition of service 'RIDL'init: (Parsing init.qcom.usb.rc took 0.01s.)
  919. [ 8.174768] init: ignored duplicate definition of service 'perfd'init: init.target.rc: 151: invalid keyword 'load_all_props'
  920. [ 8.186111] init: ignored duplicate definition of service 'poweroffhandler'init: (Parsing init.carrier.rc took 0.01s.)
  921. [ 8.195785] init: (Parsing init.target.rc took 0.02s.)
  922. [ 8.202793] init: (Parsing init.qcom.factory.rc took 0.00s.)
  923. [ 8.207549] init: (Parsing /init.qcom.rc took 0.07s.)
  924. [ 8.215085] init: (Parsing /init.usb.configfs.rc took 0.00s.)
  925. [ 8.220141] init: (Parsing /init.zygote32.rc took 0.00s.)
  926. [ 8.225205] init: (Parsing /init.rc took 0.11s.)
  927. [ 8.230988] init: Starting service 'ueventd'...
  928. [ 8.236857] init: Waiting for /dev/.coldboot_done...
  929. [ 8.241434] ueventd: ueventd started!
  930. [ 9.284942] ueventd: Coldboot took 1.03s.
  931. [ 9.287188] init: Waiting for /dev/.coldboot_done to�[ 9.308784] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
  932. [ 9.330120] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
  933. [ 9.442091] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
  934. [ 9.449717] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
  935. [ 9.459644] EXT4-fs (mmcblk0p33): Ignoring removed nomblk_io_submit option
  936. [ 9.472813] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  937. [ 9.482722] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
  938. [ 9.493223] fs_mgr: check_fs(): unmount(/data) succeeded
  939. [ 9.498923] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
  940. [ 10.437256] e2fsck (235) used greatest stack depth: 5444 bytes left
  941. [ 10.442868] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  942. [ 10.442868]
  943. [ 10.448622] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  944. [ 10.448622]
  945. [ 10.455781] e2fsck: Pass 2: Checking directory structure
  946. [ 10.455781]
  947. [ 10.462590] e2fsck: Pass 3: Checking directory connectivity
  948. [ 10.462590]
  949. [ 10.469663] e2fsck: Pass 4: Checking reference counts
  950. [ 10.469663]
  951. [ 10.476091] e2fsck: Pass 5: Checking group summary information
  952. [ 10.476091]
  953. [ 10.483517] e2fsck: data: 3973/316992 files (7.1% non-contiguous), 115059/1267451 blocks
  954. [ 10.483517]
  955. [ 10.498756] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard
  956. [ 10.508530] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
  957. [ 10.521927] init (229) used greatest stack depth: 5296 bytes left
  958. [ 10.537019] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
  959. [ 10.543086] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
  960. [ 10.549440] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
  961. [ 10.555850] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
  962. [ 10.562212] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
  963. [ 10.568819] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
  964. [ 10.575123] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
  965. [ 10.581880] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
  966. [ 10.588188] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
  967. [ 10.594637] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
  968. [ 10.601193] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
  969. [ 10.607390] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
  970. [ 10.613700] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
  971. [ 10.620320] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
  972. [ 10.626242] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
  973. [ 10.632221] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
  974. [ 10.638409] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
  975. [ 10.644690] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
  976. [ 10.651666] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
  977. [ 10.658513] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
  978. [ 10.664970] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
  979. [ 10.671151] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
  980. [ 10.676935] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
  981. [ 10.683505] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
  982. [ 10.689867] init: (Parsing /system/etc/init/rild.rc took 0.00s.)
  983. [ 10.695623] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
  984. [ 10.702518] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
  985. [ 10.709439] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
  986. [ 10.715539] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
  987. [ 10.721618] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
  988. [ 10.734536] EXT4-fs (mmcblk0p23): warning: maximal mount count reached, running e2fsck is recommended
  989. [ 10.743454] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1
  990. [ 10.758299] EXT4-fs (mmcblk0p22): warning: maximal mount count reached, running e2fsck is recommended
  991. [ 10.767206] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1
  992. [ 10.786292] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem
  993. [ 10.794011] init: Starting service 'logd'...
  994. [ 10.852085] logd.auditd: start
  995. [ 10.854144] logd.klogd: 10847041662
  996. [ 11.618036] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
  997. [ 11.626506] init: (Loading properties from /persist/speccfg/vendor_ro.prop took 0.01s.)
  998. [ 11.638107] init: (Loading properties from /system/vendor/vendor.prop took 0.00s.)
  999. [ 11.645830] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
  1000. [ 11.654416] init: (Loading properties from /persist/speccfg/vendor_persist.prop took 0.01s.)
  1001. [ 11.663688] init: property_set("ro.telephony.default_network", "22,20") failed
  1002. [ 11.670167] init: (Loading properties from /system/vendor/default.prop took 0.01s.)
  1003. [ 11.677679] init: (Loading properties from /system/vendor/power.prop took 0.00s.)
  1004. [ 11.685020] init: (Loading properties from /system/build.prop took 0.07s.)
  1005. [ 11.692044] init: (Loading properties from /vendor/build.prop took 0.00s.)
  1006. [ 11.698876] init: (Loading properties from /factory/factory.prop took 0.00s.)
  1007. [ 11.706139] init: /recovery not specified in fstab
  1008. [ 11.711887] init: Starting service 'debuggerd'...
  1009. [ 11.716710] init: do_start: Service debuggerd64 not found
  1010. [ 11.724406] init: Starting service 'vold'...
  1011. [ 11.731393] init: Not bootcharting.
  1012. [ 12.008194] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
  1013. [ 12.047508] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 260) exited with status 0
  1014. [ 12.114987] init: Starting service 'carrier_switcher'...
  1015. [ 12.122282] init: (Loading properties from /data/local.prop took 0.00s.)
  1016. [ 12.292284] init: Starting service 'logd-reinit'...
  1017. [ 12.298190] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
  1018. [ 12.308253] init: write: cannot expand '${persist.sys.ssr.enable_debug}'
  1019. [ 12.314899] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
  1020. [ 12.325887] init: write: cannot expand '${persist.sys.mba_boot_timeout}'
  1021. [ 12.332798] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
  1022. [ 12.333927] logd.daemon: reinit
  1023. [ 12.347034] init: write: cannot expand '${persist.sys.modem_auth_timeout}'
  1024. [ 12.354113] init: Service 'logd-reinit' (pid 264) exited with status 0
  1025. [ 12.360426] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
  1026. [ 12.371612] init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
  1027. [ 12.381415] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x88000000 to 0x8d300000
  1028. [ 12.409075] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xaf400000 to 0xaf500000
  1029. [ 12.462243] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
  1030. [ 13.292269] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
  1031. [ 13.368463] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
  1032. [ 13.368607] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
  1033. [ 13.368660] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
  1034. [ 13.369890] M-Notify: General: 7
  1035. [ 13.370240] memshare: Modem Restart has happened
  1036. [ 13.370584] init: Service 'carrier_switcher' (pid 261) exited with status 0
  1037. [ 13.370819] init: Starting service 'exec 2 (/init.qcom.early_boot.sh)'...
  1038. [ 13.416005] msm8x16-asoc-wcd sound.71: default codec configured
  1039. [ 13.423378] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
  1040. [ 13.429197] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
  1041. [ 13.436055] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
  1042. [ 13.446242] msm8x16-asoc-wcd sound.71: default codec configured
  1043. [ 13.460120] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
  1044. [ 13.471444] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
  1045. [ 13.479224] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
  1046. [ 13.493992] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
  1047. [ 13.506111] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
  1048. [ 13.522465] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
  1049. [ 13.534321] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
  1050. [ 13.580714] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: mux SLIM_0_RX AANC MUX has no paths
  1051. [ 13.608242] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX3 MIX1 INP3 has no paths
  1052. [ 13.615341] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX2 MIX1 INP3 has no paths
  1053. [ 13.642901] init: property_set("ro.opengles.version", "196608") failed
  1054. [ 14.159550] init.qcom.early (318) used greatest stack depth: 5288 bytes left
  1055. [ 14.210434] init: Service 'exec 2 (/init.qcom.early_boot.sh)' (pid 284) exited with status 0
  1056. [ 14.223363] init: Starting service 'healthd'...
  1057. [ 14.228779] init: Starting service 'qcom-debug'...
  1058. [ 14.233471] binder: 320:320 transaction failed 29189, size 0-0
  1059. [ 14.234291] init: Starting service 'qcom-c_core-sh'...
  1060. [ 14.235969] init: Starting service 'config_bluetooth'...
  1061. [ 14.238321] init: Starting service 'qseecomd'...
  1062. [ 14.240353] init: Starting service 'per_mgr'...
  1063. [ 14.242352] init: Starting service 'lmkd'...
  1064. [ 14.244409] init: Starting service 'servicemanager'...
  1065. [ 14.246607] init: Starting service 'surfaceflinger'...
  1066. [ 14.290467] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
  1067. [ 14.318861] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
  1068. [ 14.329052] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
  1069. [ 14.339900] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
  1070. [ 14.349774] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
  1071. [ 14.361000] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
  1072. [ 14.371452] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
  1073. [ 14.384725] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
  1074. [ 14.397753] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
  1075. [ 14.408247] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
  1076. [ 14.419378] init: Service 'qcom-debug' (pid 321) exited with status 0
  1077. [ 14.421437] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
  1078. [ 14.436315] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
  1079. [ 14.446522] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
  1080. [ 14.457279] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
  1081. [ 14.468172] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
  1082. [ 14.478722] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
  1083. [ 14.489452] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
  1084. [ 14.500198] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
  1085. [ 14.511017] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
  1086. [ 14.521459] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
  1087. [ 14.532128] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
  1088. [ 14.544730] init: Starting service 'rmt_storage'...
  1089. [ 14.551016] init: insmod: open("/system/lib/modules/adsprpc.ko") failed: No such file or directoryinit: Starting service 'console'...
  1090. [ 14.564431] init: Service 'qcom-c_core-sh' (pid 322) exited with status �[ 14.578024] enable_store: android_usb: already disabled
  1091. [ 14.586944] init: Starting service 'adbd'...
  1092. [ 14.596368] init: Starting service 'ppd'...
  1093. [ 14.608937] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 3 (/system/bin/update_verifier)'
  1094. [ 14.612658] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
  1095. [ 14.619626] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded
  1096. [ 14.637568] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
  1097. [ 14.650226] init: Starting service 'qcomsysd'...
  1098. [ 14.655888] init: Starting service 'qcom-c_main-sh'...
  1099. [ 14.664520] init: Starting service 'cnd'...
  1100. [ 14.680536] init: Starting service 'irsc_util'...
  1101. [ 14.686518] init: Starting service 'tftp_server'...
  1102. msm8909:/ $ [ 14.723989] init: Starting service 'ptt_socket_app'...
  1103. [ 14.744400] handle_qmi_request: Error getting req_desc for msg_id 36
  1104. [ 14.747786] init: Starting service 'cnss_diag'...
  1105. [ 14.749951] init: Starting service 'atfwd_quec'...
  1106. [ 14.751937] init: Starting service 'quecserver'...
  1107. [ 14.753090] init: cannot find '/system/bin/usb_uicc_client' (No such file or directory), disabling 'usb_uicc_daemon'
  1108. [ 14.753928] init: Starting service 'bms-sh'...
  1109. [ 14.755804] init: Starting service 'qcom-usb-sh'...
  1110. [ 14.757018] init: cannot find '/system/bin/qrngd' (No such file or directory), disabling 'qrngd'
  1111. [ 14.778425] init: Starting service 'thermal-engine'...
  1112. [ 14.780686] init: Starting service 'wcnss-service'...
  1113. [ 14.782685] init: Starting service 'imsstarter'...
  1114. [ 14.784121] init: cannot find '/system/bin/dts_configurator' (No such file or directory), disabling 'dts_configurator'
  1115. [ 14.785319] init: Starting service 'zygote'...
  1116. [ 14.802514] init: Starting service 'audioserver'...
  1117. [ 14.804762] init: Starting service 'cameraserver'...
  1118. [ 14.826820] init: couldn't write 383 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  1119. [ 14.827538] init: Starting service 'drm'...
  1120. [ 14.830045] init: Starting service 'installd'...
  1121. [ 14.845179] init: Starting service 'keystore'...
  1122. [ 14.847674] init: Starting service 'mediacodec'...
  1123. [ 14.849834] init: Starting service 'mediadrm'...
  1124. [ 14.852107] init: Starting service 'mediaextractor'...
  1125. [ 14.854323] init: Starting service 'media'...
  1126. [ 14.856669] init: Starting service 'netd'...
  1127. [ 14.918710] init: Starting service 'ril-daemon'...
  1128. [ 14.922963] mem_share_svc_recv_msg: Error receiving message
  1129. [ 14.926641] init: Starting service 'dpmd'...
  1130. [ 14.930281] init: Starting service 'cnss-daemon'...
  1131. [ 14.932438] init: Starting service 'loc_launcher'...
  1132. [ 14.934355] init: Starting service 'qcom-sh'...
  1133. [ 14.936464] init: Service fuse_uicc0 does not have a SELinux domain defined.
  1134. [ 14.967343] init: Starting service 'RIDL'...
  1135. [ 14.972949] init: Starting service 'fidodaemon'...
  1136. [ 14.999124] init: Starting service 'qcamerasvr'...
  1137. [ 15.005291] init: Starting service 'time_daemon'...
  1138. [ 15.031970] init: Starting service 'audiod'...
  1139. [ 15.099173] init: Starting service 'gatekeeperd'...
  1140. [ 15.140700] gbam_connect_work: Bam channel is not ready
  1141. [ 15.146428] init: Starting service 'perfprofd'...
  1142. [ 15.331930] healthd: BatteryTechnologyPath not found
  1143. [ 15.335987] healthd: BatteryFullChargePath not found
  1144. [ 15.362226] healthd: BatteryCycleCountPath not found
  1145. [ 15.473920] init: Service 'irsc_util' (pid 368) exited with status 0
  1146. [ 15.607651] init: Service 'cnss_diag' (pid 373) exited with status 255
  1147. [ 15.776319] init: Starting service 'qmuxd'...
  1148. [ 16.119577] init: cannot find '/system/bin/ipacm-diag' (No such file or directory), disabling 'ipacm-diag'
  1149. [ 16.160683] init: Starting service 'imsqmidaemon'...
  1150. [ 16.227806] init: Service 'imsstarter' (pid 380) exited with status 0
  1151. [ 16.366987] init: cannot find '/system/bin/ipacm' (No such file or directory), disabling 'ipacm'
  1152. [ 16.518850] init: Starting service 'vm_bms'...
  1153. [ 16.531335] init: Service 'bms-sh' (pid 376) exited with status 0
  1154. [ 16.575871] init: Starting service 'imsdatadaemon'...
  1155. [ 16.625969] devbw qcom,gpubw.23: Governor already resumed!
  1156. [ 16.630513] devbw qcom,gpubw.23: Unable to resume BW HW mon governor (-16)
  1157. [ 17.011304] init: Starting service 'ril-daemon2'...
  1158. [ 17.211079] init: Starting service 'ims_rtp_daemon'...
  1159. [ 17.237760] init: Starting service 'imscmservice'...
  1160. [ 17.322547] init: Starting service 'qti'...
  1161. [ 17.442015] init: Starting service 'netmgrd'...
  1162. [ 17.738711] init: Service 'qcom-c_main-sh' (pid 364) exited with status 0
  1163. [ 17.935171] init: Starting service 'bootanim'...
  1164. [ 17.991064] init: Service 'qcom-usb-sh' (pid 377) exited with status 0
  1165. [ 18.702942] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
  1166. [ 18.757505] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
  1167. [ 18.764555] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
  1168. [ 18.817531] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
  1169. [ 18.824269] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
  1170. [ 18.873293] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1171. [ 18.898831] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
  1172. [ 18.905362] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1173. [ 18.920932] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
  1174. [ 18.958674] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
  1175. [ 18.965558] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
  1176. [ 19.027363] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1177. [ 19.033480] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
  1178. [ 19.047817] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1179. [ 19.053146] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
  1180. [ 19.097296] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1181. [ 19.102625] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
  1182. [ 19.130494] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1183. [ 19.135913] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
  1184. [ 19.224183] msm_pcm_volume_ctl_get substream runtime not found
  1185. [ 19.237812] msm_pcm_volume_ctl_get substream runtime not found
  1186. [ 19.243204] msm_pcm_volume_ctl_get substream runtime not found
  1187. [ 19.279306] msm_pcm_volume_ctl_get substream runtime not found
  1188. [ 19.285278] msm_pcm_volume_ctl_get substream or runtime not found
  1189. [ 19.295467] msm_pcm_volume_ctl_get substream runtime not found
  1190. [ 19.640319] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
  1191. [ 19.667589] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
  1192. [ 19.673119] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
  1193. [ 19.704968] msm_ds2_dap_set_security_control: dmid 0 license key 0
  1194. [ 19.719618] core_set_license: Invalid cal block to send
  1195. [ 19.724802] msm_ds2_dap_set_security_control: failed to set dolby license[ 19.740123] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
  1196. [ 19.745491] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
  1197. [ 19.763360] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
  1198. [ 20.031957] cp (555) used greatest stack depth: 5192 bytes left
  1199. [ 20.284586] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
  1200. [ 20.304493] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
  1201. [ 20.322247] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
  1202. [ 20.328674] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
  1203. [ 20.346137] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
  1204. [ 20.360717] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1205. [ 20.366045] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
  1206. [ 20.407386] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1207. [ 20.412717] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
  1208. [ 20.477297] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
  1209. [ 20.487406] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
  1210. [ 20.515095] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1211. [ 20.526845] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
  1212. [ 20.547368] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1213. [ 20.552695] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
  1214. [ 20.570410] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1215. [ 20.575752] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
  1216. [ 20.593849] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
  1217. [ 20.603969] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
  1218. [ 20.659033] msm_pcm_volume_ctl_get substream runtime not found
  1219. [ 20.664052] msm_pcm_volume_ctl_get substream runtime not found
  1220. [ 20.697767] msm_pcm_volume_ctl_get substream runtime not found
  1221. [ 20.702827] msm_pcm_volume_ctl_get substream runtime not found
  1222. [ 20.704596] init: Service 'qcom-sh' (pid 401) exited with status 0
  1223. [ 20.747373] msm_pcm_volume_ctl_get substream or runtime not found
  1224. [ 20.757669] msm_pcm_volume_ctl_get substream runtime not found
  1225. [ 21.329744] msm_camera_fill_vreg_params:65 i 2 j 1 cam_vio
  1226. [ 21.337314] msm_camera_fill_vreg_params:76 i 4 j 2 cam_vana
  1227. [ 21.341872] msm_camera_fill_vreg_params:76 i 4 j 2 cam_vana
  1228. [ 21.357204] msm_camera_fill_vreg_params:65 i 6 j 1 cam_vio
  1229. [ 21.463679] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x37 MSTR_STS:0x0d1300c8 OPER:0x00000010
  1230. [ 21.478491] msm_sensor_match_id: gc5024: read id failed
  1231. [ 21.483866] msm_sensor_check_id:1336 match id failed rc -107
  1232. [ 21.653259] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x37 MSTR_STS:0x0d1300c8 OPER:0x00000010
  1233. [ 21.669032] msm_sensor_match_id: gc5024: read id failed
  1234. [ 21.673317] msm_sensor_check_id:1336 match id failed rc -107
  1235. [ 21.845259] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x37 MSTR_STS:0x0d1300c8 OPER:0x00000010
  1236. [ 21.860106] msm_sensor_match_id: gc5024: read id failed
  1237. [ 21.865169] msm_sensor_check_id:1336 match id failed rc -107
  1238. [ 21.937164] gc5024 power up failed
  1239. [ 21.939367] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -107
  1240. [ 21.995170] msm_isp_close_node: halt timeout rc=0
  1241. [ 22.191995] configuring dma source while dma is active
  1242. [ 22.949184] Couldn't get snoc_qosgen
  1243. [ 23.036034] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
  1244. [ 23.048398] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
  1245. [ 23.056226] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
  1246. [ 23.064345] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
  1247. [ 23.218150] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
  1248. [ 23.239052] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
  1249. [ 23.245532] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
  1250. [ 23.251744] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
  1251. [ 23.491621] init: property_set("ro.ril.svlte1x", "false") failed
  1252. [ 23.500308] init: property_set("ro.ril.svdo", "false") failed
  1253. [ 23.603213] init: Service 'RIDL' (pid 403) exited with status 65
  1254. [ 23.801028] wcnss: no space available for smd frame
  1255. [ 23.827263] wcnss: no space available for smd frame
  1256. [ 23.896410] wcnss: no space available for smd frame
  1257. [ 23.927313] wcnss: no space available for smd frame
  1258. [ 23.945403] init: Service 'config_bluetooth' (pid 323) exited with status 0
  1259. [ 23.957194] wcnss: no space available for smd frame
  1260. [ 23.987234] wcnss: no space available for smd frame
  1261. [ 29.852641] HTB: quantum of class 10001 is big. Consider r2q change.
  1262. [ 29.906049] HTB: quantum of class 10010 is big. Consider r2q change.
  1263. [ 39.175148] init: Service 'bootanim' (pid 553) exited with status 0
  1264. [ 39.525109] init: Starting service 'qti-testscripts'...
  1265. [ 39.535781] init: Starting service 'atfwd'...
  1266. [ 39.546171] init: Starting service 'dmclient'...
  1267. [ 39.551592] init: cannot find '/system/bin/qrngp' (No such file or directory), disabling 'qrngp'
  1268. [ 39.574348] init: Starting service 'exec 4 (/system/bin/bootstat)'...
  1269. [ 39.584243] type=1400 audit(147.979:4): avc: denied { getattr } for pid=3884 comm="dmclient" path="/vendor" dev="rootfs" ino=3964 scontext=u:r:dmclient:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=0
  1270. [ 39.593214] init: Service 'qti-testscripts' (pid 3878) exited with status 0
  1271. [ 39.694575] init: Service 'exec 4 (/system/bin/bootstat)' (pid 3885) exited with status 0
  1272. [ 39.703930] init: Starting service 'exec 5 (/system/bin/bootstat)'...
  1273. [ 39.771346] init: Service 'exec 5 (/system/bin/bootstat)' (pid 3893) exited with status 0
  1274. [ 39.780044] init: Starting service 'exec 6 (/system/bin/bootstat)'...
  1275. [ 39.871526] init: Service 'exec 6 (/system/bin/bootstat)' (pid 3897) exited with status 0
  1276. [ 39.880013] init: Starting service 'exec 7 (/system/bin/bootstat)'...
  1277. [ 39.904283] core_ctl: module license 'BSD' taints kernel.
  1278. [ 39.908984] Disabling lock debugging due to kernel taint
  1279. [ 39.961491] init: Service 'exec 7 (/system/bin/bootstat)' (pid 3899) exited with status 0
  1280. [ 40.771010] init: Starting service 'perfd'...
  1281. [ 40.785745] init: Service 'qcom-post-boot' (pid 3875) exited with status 0
  1282. [ 43.803813] type=1400 audit(152.199:5): avc: denied { read } for pid=4214 comm="RenderThread" name="gpuclk" dev="sysfs" ino=10905 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
  1283. [ 45.668237] init: avc: granted { set } for property=net.lte.ims.data.enabled pid=3587 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
  1284. [ 99.703981] type=1400 audit(208.099:6): avc: denied { read } for pid=3884 comm="dmclient" name="name" dev="sysfs" ino=10426 scontext=u:r:dmclient:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
  1285. [ 99.814629] type=1400 audit(208.209:7): avc: denied { search } for pid=3884 comm="dmclient" name="/" dev="mmcblk0p23" ino=2 scontext=u:r:dmclient:s0 tcontext=u:object_r:cache_file:s0 tclass=dir permissive=0
  1286. [ 315.247514] kworker/u8:3 (49) used greatest stack depth: 5100 bytes left
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement