Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- For my RGB setup, I'm using a recapped 1chip-01 SNES that has the Voultar RGB amp installed to restore the correct color intensity of the older SNES models. This SNES also has a stock C11 capacitor, which is important for Super Punch Out, because it is one of only a handful of SNES games that has a darkened top line at the top of the screen, not to mention the screen fades in way slower.
- The capacitor on C11 was initially swapped out for a 470 microfarad capacitor, which yields cleaner picture quality for any games that suffer from severe ghosting, like Mega Man X for example. For me, it was enough of an issue to re-install the original capacitor to minimize the darkening issues, since Super Punch Out doesn't suffer from ghosting nearly as much as other games, and is the main Super Nintendo game I speedrun.
- I've also replaced the PSU with a Triad one to reduce any possible video noise coming through an old PSU. These mods were done by FragolRoc, and if you're interested in getting your console to output stellar quality like this, then you're in luck, because he's currently able to do a wide variety of mods and services to many different consoles of many different varieties! You can look at his website here for further options: https://fragol.tech/
- This was captured via an Insurrection Industries SNES SCART Sync on Luma cable (make sure to ask about the 2 ground pins actually being connected to avoid the possibility of dim buzzy audio/video if you're wanting this for NES use). I've tried Retro Access cables, and was disappointed with the video I was seeing from them after running various capture tests with multiple compatible consoles and multiple types of sync. I ordered Csync and Sync on Luma from Retro Access, and both had less than stellar performance, so I swapped back to the Insurrection cable and haven't looked back.
- I'm using the Datapath E1 card, which is an internal capture card that is typically used for more serious applications, but these cards have been slowly phased out of usage for those applications as they get progressively obsoleted by better cards, so you'll find them on ebay for severely marked down, affordable 60-100 dollar prices (these usually cost thousands of dollars when they were sold new).
- One caveat is these loose cards almost always have the incorrect bracket, so they don't fit in your computer as is usually, and would require a full length bracket that's been 3D printed so it fits in nice and stable.
- Beyond this, I also needed some way to interface the SCART cable with the capture card, since this card only has a DVI port. You can either get a device known as a SCART2DVI on Insurrection Industries' website, or opt for a device that Voultar made called, and I'm not kidding, the "Double Penetration SD" which despite the crude name, is extremely convenient in that it splits the video to DVI, and also has a passthrough SCART output that's very useful for playing on a TV. I opted for the convenience of the second device, especially since the recording quality here appears excellent.
- Once I finally had all of this in place, I had to figure out the software for this capture card, and oh god, is this not like any other capture card I've ever used before. This card will capture your video feed from your console pixel perfectly, BUT you need to give it the exact correct information, otherwise it will look like a blurry mess.
- This information includes the exact horizontal resolution of the video signal it's receiving, which isn't actually how wide the picture is. This is a very specific internal value that you need to know, and this varies wildly from different hardware. For the SNES, this value is always 341, just like the NES.
- You also need to adjust a value called "phase" which will make your video blurry if it's wrong, and if you change literally anything even slightly in your setup, this value will be completely different the next time you use it.
- The program this card uses (Vision Window) is one of the worst programs I've ever used. It has rampant glitches that will randomly change all your sensitive values that need to be exactly perfect if you ever press any buttons like "OK" and "Apply" to close the menu. Sometimes it'll just decide that your values will be completely different numbers arbitrarily, it's super fun.
- Also apparently you cannot have the latest firmware for the program, otherwise it'll run into an issue where any console power cycle (i.e. the reset or power buttons) will ruin the internal values you just set up. I needed to downgrade to Vision 7.11.2 to fix this issue.
- One big thing that I ran into was an Avisynth function called TemporalSoften, which will smoothen adjacent pixels together, so long as they are similar enough in color. You have a couple of parameters you can play with, but eventually, I went with this line of code in my upscaling Avisynth script, which intensified the parameters in such a way to where everything still looked natural, like SNES footage is supposed to look: TemporalSoften(a,254,7,254,mode=1)
- After all of that, I finally had a video that looked clean enough for me to accept for youtube uploads. It was a lot of trial and error, as well as times where several pieces of my capture chain would fail and require troubleshooting to get working again, but finally things are looking great.
Advertisement
Add Comment
Please, Sign In to add comment