{
  "auto_reload_latest_snapshot": true,
  "current_printer_profile_guid": "6b3df448-eaee-4077-970d-0cdf276a6063",
  "default_printer_profile": {
    "small_perimeter_speed": null,
    "bridging_speed_multiplier": 100,
    "perimeter_speed": null,
    "outline_speed_multiplier": 100,
    "first_layer_travel_speed": null,
    "top_solid_infill_speed": null,
    "top_solid_infill_speed_text": null,
    "movement_speed": 6000,
    "solid_infill_speed": null,
    "ooze_shield_speed": null,
    "guid": "5d39248f-5e11-4c42-b7f4-810c7acc287e",
    "priming_height": 0.75,
    "small_perimeter_speed_multiplier": 100,
    "has_been_saved_by_user": false,
    "origin_z": null,
    "abort_out_of_bounds": true,
    "min_y": 0.0,
    "min_z": 0.0,
    "detract_speed": 3000,
    "suppress_snapshot_command_always": true,
    "default_firmware_retractions": false,
    "speed_tolerance": 0.6,
    "z_hop": 0.5,
    "maximum_z_speed": null,
    "infill_speed": null,
    "small_perimeter_speed_text": null,
    "max_z": 0.0,
    "e_axis_default_mode": "require-explicit",
    "external_perimeter_speed_multiplier": 100,
    "max_y": 0.0,
    "gap_fill_speed": null,
    "ooze_shield_speed_multiplier": 100,
    "description": "",
    "support_structure_speed_multiplier": 100,
    "bridge_speed": null,
    "first_layer_speed_multiplier": 100,
    "solid_infill_speed_text": null,
    "slicer_type": "other",
    "top_solid_infill_speed_multiplier": 100,
    "g90_influences_extruder": "use-octoprint-settings",
    "external_perimeter_speed_text": null,
    "solid_infill_speed_multiplier": 100,
    "origin_y": null,
    "origin_x": null,
    "above_raft_speed_multiplier": 100,
    "min_x": 0.0,
    "print_speed": null,
    "first_layer_speed": null,
    "retract_speed": 4000,
    "default_firmware_retractions_zhop": false,
    "axis_speed_display_units": "mm-min",
    "auto_position_detection_commands": "",
    "prime_pillar_speed_multiplier": 100,
    "name": "Default Printer",
    "retract_length": 2.0,
    "snapshot_command": "snap",
    "override_octoprint_print_volume": false,
    "support_speed": null,
    "external_perimeter_speed": null,
    "skirt_brim_speed": null,
    "first_layer_speed_text": null,
    "z_hop_speed": 6000,
    "num_slow_layers": 0,
    "max_x": 0.0,
    "prime_pillar_speed": null,
    "printer_position_confirmation_tolerance": 0.001,
    "units_default": "millimeters",
    "xyz_axes_default_mode": "require-explicit",
    "auto_detect_position": true,
    "above_raft_speed": null
  },
  "default_stabilization_profile": {
    "y_relative_path_loop": true,
    "y_relative": 50.0,
    "x_relative_path": "50.0",
    "guid": "3a94e945-f5d5-4655-909a-e61c1122cc1f",
    "y_fixed_path_loop": true,
    "x_relative_path_invert_loop": true,
    "x_type": "relative",
    "x_relative_path_loop": true,
    "x_fixed_path": "0",
    "y_type": "relative",
    "y_fixed_coordinate": 0.0,
    "x_fixed_coordinate": 0.0,
    "y_fixed_path_invert_loop": true,
    "description": "",
    "x_fixed_path_loop": true,
    "x_relative_print": 50.0,
    "x_relative": 50.0,
    "x_fixed_path_invert_loop": true,
    "y_relative_path_invert_loop": true,
    "name": "Default Stabilization",
    "y_fixed_path": "0",
    "y_relative_print": 50.0,
    "y_relative_path": "50"
  },
  "stabilization_type_options": [
    {
      "name": "Disabled",
      "value": "disabled"
    },
    {
      "name": "Fixed Coordinate",
      "value": "fixed_coordinate"
    },
    {
      "name": "List of Fixed Coordinates",
      "value": "fixed_path"
    },
    {
      "name": "Relative Coordinate (0-100)",
      "value": "relative"
    },
    {
      "name": "List of Relative Coordinates",
      "value": "relative_path"
    }
  ],
  "overlay_text_templates": [
    "snapshot_number",
    "current_time",
    "time_elapsed"
  ],
  "snapshot_extruder_trigger_options": [
    {
      "visible": true,
      "name": "Ignore",
      "value": ""
    },
    {
      "visible": true,
      "name": "Trigger",
      "value": "trigger_on"
    },
    {
      "visible": true,
      "name": "Forbidden",
      "value": "forbidden"
    }
  ],
  "show_position_state_changes": true,
  "stabilizations": [
    {
      "y_relative_path_loop": true,
      "y_relative": 50.0,
      "x_relative_path": "54.904,54.619,54.157,53.536,52.778,51.913,50.975,50.000,49.025,48.087,47.222,46.464,45.843,45.381,45.096,45.000,45.096,45.381,45.843,46.464,47.222,48.087,49.025,50.000,50.975,51.913,52.778,53.536,54.157,54.619,54.904,55.000",
      "guid": "801846db-3889-4d90-8496-9a473ee99cc4",
      "y_fixed_path_loop": true,
      "x_relative_path_invert_loop": false,
      "x_type": "relative_path",
      "x_relative_path_loop": true,
      "x_fixed_path": "0",
      "y_type": "relative_path",
      "y_fixed_coordinate": 0.0,
      "x_fixed_coordinate": 0.0,
      "y_fixed_path_invert_loop": true,
      "description": "Moves  print in a circular pattern around the center.  Best for prints with lower framerates, else the spiraling will be too fast.",
      "x_fixed_path_loop": true,
      "x_relative_print": 50.0,
      "x_relative": 50.0,
      "x_fixed_path_invert_loop": true,
      "y_relative_path_invert_loop": false,
      "name": "Animated - Orbit",
      "y_fixed_path": "0",
      "y_relative_print": 50.0,
      "y_relative_path": "50.975,51.913,52.778,53.536,54.157,54.619,54.904,55.000,54.904,54.619,54.157,53.536,52.778,51.913,50.975,50.000,49.025,48.087,47.222,46.464,45.843,45.381,45.096,45.000,45.096,45.381,45.843,46.464,47.222,48.087,49.025,50.000"
    },
    {
      "y_relative_path_loop": true,
      "y_relative": 50.0,
      "x_relative_path": "50.0",
      "guid": "037bbb20-ed5d-4900-8a61-59a4b8ce5152",
      "y_fixed_path_loop": true,
      "x_relative_path_invert_loop": true,
      "x_type": "relative",
      "x_relative_path_loop": true,
      "x_fixed_path": "0",
      "y_type": "relative",
      "y_fixed_coordinate": 0.0,
      "x_fixed_coordinate": 0.0,
      "y_fixed_path_invert_loop": true,
      "description": "",
      "x_fixed_path_loop": true,
      "x_relative_print": 50.0,
      "x_relative": 1.0,
      "x_fixed_path_invert_loop": true,
      "y_relative_path_invert_loop": true,
      "name": "Fixed - Extruder at Center Left",
      "y_fixed_path": "0",
      "y_relative_print": 50.0,
      "y_relative_path": "50"
    },
    {
      "y_relative_path_loop": true,
      "y_relative": 50.0,
      "x_relative_path": "50.0",
      "guid": "d35dbbe6-949e-4f97-b16f-c575d94ad062",
      "y_fixed_path_loop": true,
      "x_relative_path_invert_loop": true,
      "x_type": "relative",
      "x_relative_path_loop": true,
      "x_fixed_path": "0",
      "y_type": "relative",
      "y_fixed_coordinate": 0.0,
      "x_fixed_coordinate": 0.0,
      "y_fixed_path_invert_loop": true,
      "description": "",
      "x_fixed_path_loop": true,
      "x_relative_print": 50.0,
      "x_relative": 50.0,
      "x_fixed_path_invert_loop": true,
      "y_relative_path_invert_loop": true,
      "name": "Fixed - Extruder at Center",
      "y_fixed_path": "0",
      "y_relative_print": 50.0,
      "y_relative_path": "50"
    },
    {
      "y_relative_path_loop": true,
      "y_relative": 1.0,
      "x_relative_path": "50.0",
      "guid": "c1738be7-fb3c-4191-b26a-b74151eceb9a",
      "y_fixed_path_loop": true,
      "x_relative_path_invert_loop": true,
      "x_type": "relative",
      "x_relative_path_loop": true,
      "x_fixed_path": "0",
      "y_type": "relative",
      "y_fixed_coordinate": 0.0,
      "x_fixed_coordinate": 0.0,
      "y_fixed_path_invert_loop": true,
      "description": "",
      "x_fixed_path_loop": true,
      "x_relative_print": 50.0,
      "x_relative": 50.0,
      "x_fixed_path_invert_loop": true,
      "y_relative_path_invert_loop": true,
      "name": "Fixed - Extruder at Front Center",
      "y_fixed_path": "0",
      "y_relative_print": 50.0,
      "y_relative_path": "50"
    },
    {
      "y_relative_path_loop": true,
      "y_relative": 99.0,
      "x_relative_path": "50.0",
      "guid": "56e647e1-0643-4a84-8b40-209da3750f26",
      "y_fixed_path_loop": true,
      "x_relative_path_invert_loop": true,
      "x_type": "relative",
      "x_relative_path_loop": true,
      "x_fixed_path": "0",
      "y_type": "relative",
      "y_fixed_coordinate": 0.0,
      "x_fixed_coordinate": 0.0,
      "y_fixed_path_invert_loop": true,
      "description": "",
      "x_fixed_path_loop": true,
      "x_relative_print": 50.0,
      "x_relative": 50.0,
      "x_fixed_path_invert_loop": true,
      "y_relative_path_invert_loop": true,
      "name": "Fixed - Extruder at Back Center",
      "y_fixed_path": "0",
      "y_relative_print": 50.0,
      "y_relative_path": "50"
    },
    {
      "y_relative_path_loop": true,
      "y_relative": 50.0,
      "x_relative_path": "45, 45.5, 46, 46.5, 47, 47.5, 48, 48.5, 49, 49.5, 50, 50.5, 51, 51.5, 52, 52.5, 53, 53.5, 54, 54.5, 55",
      "guid": "0d97b0ec-57ee-425b-a202-ea037910337d",
      "y_fixed_path_loop": true,
      "x_relative_path_invert_loop": true,
      "x_type": "relative_path",
      "x_relative_path_loop": true,
      "x_fixed_path": "0",
      "y_type": "relative",
      "y_fixed_coordinate": 0.0,
      "x_fixed_coordinate": 0.0,
      "y_fixed_path_invert_loop": true,
      "description": "Animate the X carriage with a back-and-forth motion while keeping the Bed stable.  I like this one!",
      "x_fixed_path_loop": true,
      "x_relative_print": 50.0,
      "x_relative": 50.0,
      "x_fixed_path_invert_loop": true,
      "y_relative_path_invert_loop": true,
      "name": "Animated - Printing",
      "y_fixed_path": "0",
      "y_relative_print": 50.0,
      "y_relative_path": "50"
    },
    {
      "y_relative_path_loop": true,
      "y_relative": 1.0,
      "x_relative_path": "50.0",
      "guid": "7e12ac9f-6b7a-4fa8-9f6f-efa17c458afa",
      "y_fixed_path_loop": true,
      "x_relative_path_invert_loop": true,
      "x_type": "relative",
      "x_relative_path_loop": true,
      "x_fixed_path": "0",
      "y_type": "relative",
      "y_fixed_coordinate": 0.0,
      "x_fixed_coordinate": 0.0,
      "y_fixed_path_invert_loop": true,
      "description": "",
      "x_fixed_path_loop": true,
      "x_relative_print": 50.0,
      "x_relative": 99.0,
      "x_fixed_path_invert_loop": true,
      "y_relative_path_invert_loop": true,
      "name": "Fixed - Extruder at Front Right",
      "y_fixed_path": "0",
      "y_relative_print": 50.0,
      "y_relative_path": "50"
    },
    {
      "y_relative_path_loop": true,
      "y_relative": 99.0,
      "x_relative_path": "100.0",
      "guid": "48413ad7-8345-4da5-af0b-a4f7a4350fc3",
      "y_fixed_path_loop": true,
      "x_relative_path_invert_loop": true,
      "x_type": "relative",
      "x_relative_path_loop": true,
      "x_fixed_path": "0",
      "y_type": "relative",
      "y_fixed_coordinate": 0.0,
      "x_fixed_coordinate": 0.0,
      "y_fixed_path_invert_loop": true,
      "description": "",
      "x_fixed_path_loop": true,
      "x_relative_print": 100.0,
      "x_relative": 99.0,
      "x_fixed_path_invert_loop": true,
      "y_relative_path_invert_loop": true,
      "name": "Fixed - Extruder at Back Right",
      "y_fixed_path": "0",
      "y_relative_print": 100.0,
      "y_relative_path": "100"
    },
    {
      "y_relative_path_loop": true,
      "y_relative": 99.0,
      "x_relative_path": "50.0",
      "guid": "93036d8c-de74-4fc9-96aa-d9bb410df9b0",
      "y_fixed_path_loop": true,
      "x_relative_path_invert_loop": true,
      "x_type": "relative",
      "x_relative_path_loop": true,
      "x_fixed_path": "0",
      "y_type": "relative",
      "y_fixed_coordinate": 0.0,
      "x_fixed_coordinate": 0.0,
      "y_fixed_path_invert_loop": true,
      "description": "",
      "x_fixed_path_loop": true,
      "x_relative_print": 50.0,
      "x_relative": 1.0,
      "x_fixed_path_invert_loop": true,
      "y_relative_path_invert_loop": true,
      "name": "Fixed - Extruder at Back Left",
      "y_fixed_path": "0",
      "y_relative_print": 50.0,
      "y_relative_path": "50"
    },
    {
      "y_relative_path_loop": true,
      "y_relative": 50.0,
      "x_relative_path": "50.0",
      "guid": "60eb5c1f-9b06-4205-9e99-840a8b76fd17",
      "y_fixed_path_loop": true,
      "x_relative_path_invert_loop": true,
      "x_type": "relative",
      "x_relative_path_loop": true,
      "x_fixed_path": "0",
      "y_type": "relative",
      "y_fixed_coordinate": 0.0,
      "x_fixed_coordinate": 0.0,
      "y_fixed_path_invert_loop": true,
      "description": "",
      "x_fixed_path_loop": true,
      "x_relative_print": 50.0,
      "x_relative": 99.0,
      "x_fixed_path_invert_loop": true,
      "y_relative_path_invert_loop": true,
      "name": "Fixed - Extruder at Center Right",
      "y_fixed_path": "0",
      "y_relative_print": 50.0,
      "y_relative_path": "50"
    },
    {
      "y_relative_path_loop": true,
      "y_relative": 1.0,
      "x_relative_path": "50.0",
      "guid": "5655d63b-e23f-4e07-8ab0-c3bd3461e944",
      "y_fixed_path_loop": true,
      "x_relative_path_invert_loop": true,
      "x_type": "relative",
      "x_relative_path_loop": true,
      "x_fixed_path": "0",
      "y_type": "relative",
      "y_fixed_coordinate": 0.0,
      "x_fixed_coordinate": 0.0,
      "y_fixed_path_invert_loop": true,
      "description": "",
      "x_fixed_path_loop": true,
      "x_relative_print": 50.0,
      "x_relative": 1.0,
      "x_fixed_path_invert_loop": true,
      "y_relative_path_invert_loop": true,
      "name": "Fixed - Extruder at Front Left",
      "y_fixed_path": "0",
      "y_relative_print": 50.0,
      "y_relative_path": "50"
    }
  ],
  "platform": "linux2",
  "renderings": [
    {
      "overlay_text_template": "",
      "overlay_text_valign": "top",
      "thread_count": 1,
      "overlay_text_color": "[255, 255, 255, 128]",
      "min_fps": 2.0,
      "guid": "55219852-8ece-401e-8374-b4a3a59e32d4",
      "overlay_font_path": "",
      "sync_with_timelapse": true,
      "max_fps": 120.0,
      "fps": 15.0,
      "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}",
      "selected_watermark": "",
      "overlay_text_alignment": "left",
      "description": "Renders MP4 at a constant 15FPS. Synchronizes with the default timelapse plugin.",
      "output_format": "mp4",
      "fps_calculation_type": "static",
      "post_roll_seconds": 0.0,
      "bitrate": "5000k",
      "overlay_text_halign": "left",
      "name": "MP4 - 15 FPS",
      "enabled": true,
      "enable_watermark": false,
      "pre_roll_seconds": 0.0,
      "overlay_font_size": 10,
      "run_length_seconds": 5.0,
      "overlay_text_pos": "[10, 10]"
    },
    {
      "overlay_text_template": "",
      "overlay_text_valign": "top",
      "thread_count": 1,
      "overlay_text_color": "[255, 255, 255, 128]",
      "min_fps": 2.0,
      "guid": "d4898ba7-8d27-4479-b7d8-34c063ae7a68",
      "overlay_font_path": "",
      "sync_with_timelapse": true,
      "max_fps": 120.0,
      "fps": 30.0,
      "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}",
      "selected_watermark": "",
      "overlay_text_alignment": "left",
      "description": "Generates MP4 with a fixed length of 5 seconds. Adds 1 second of pre-roll using the first frame and one second post-roll using the last frame.  Synchronizes with the default timelapse plugin.",
      "output_format": "mp4",
      "fps_calculation_type": "duration",
      "post_roll_seconds": 10.0,
      "bitrate": "5000k",
      "overlay_text_halign": "left",
      "name": "MP4 - Fixed Length - 00:05 + 1 second pre and post roll.",
      "enabled": true,
      "enable_watermark": false,
      "pre_roll_seconds": 2.0,
      "overlay_font_size": 10,
      "run_length_seconds": 5.0,
      "overlay_text_pos": "[10, 10]"
    },
    {
      "overlay_text_template": "",
      "overlay_text_valign": "top",
      "thread_count": 1,
      "overlay_text_color": "[255, 255, 255, 128]",
      "min_fps": 2.0,
      "guid": "bc6ffaf5-38db-4ffe-8cfd-d8b94129853c",
      "overlay_font_path": "",
      "sync_with_timelapse": true,
      "max_fps": 120.0,
      "fps": 30.0,
      "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}",
      "selected_watermark": "",
      "overlay_text_alignment": "left",
      "description": "Generates MP4 with a fixed length of 15 seconds. Synchronizes with the default timelapse plugin.",
      "output_format": "mp4",
      "fps_calculation_type": "duration",
      "post_roll_seconds": 0.0,
      "bitrate": "5000k",
      "overlay_text_halign": "left",
      "name": "MP4 - Fixed Length - 00:15",
      "enabled": true,
      "enable_watermark": false,
      "pre_roll_seconds": 0.0,
      "overlay_font_size": 10,
      "run_length_seconds": 15.0,
      "overlay_text_pos": "[10, 10]"
    },
    {
      "overlay_text_template": "",
      "overlay_text_valign": "top",
      "thread_count": 1,
      "overlay_text_color": "[255, 255, 255, 128]",
      "min_fps": 2.0,
      "guid": "0b6e94ef-70ca-4798-83e8-e41ae632faf8",
      "overlay_font_path": "",
      "sync_with_timelapse": true,
      "max_fps": 120.0,
      "fps": 60.0,
      "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}",
      "selected_watermark": "",
      "overlay_text_alignment": "left",
      "description": "Renders MP4 at a constant 60FPS. Synchronizes with the default timelapse plugin.",
      "output_format": "mp4",
      "fps_calculation_type": "static",
      "post_roll_seconds": 0.0,
      "bitrate": "5000k",
      "overlay_text_halign": "left",
      "name": "MP4 - 60 FPS",
      "enabled": true,
      "enable_watermark": false,
      "pre_roll_seconds": 0.0,
      "overlay_font_size": 10,
      "run_length_seconds": 5.0,
      "overlay_text_pos": "[10, 10]"
    },
    {
      "overlay_text_template": "",
      "overlay_text_valign": "top",
      "thread_count": 1,
      "overlay_text_color": "[255, 255, 255, 128]",
      "min_fps": 2.0,
      "guid": "af3ef70a-1e0c-4a39-bdd6-4703d0eb42cf",
      "overlay_font_path": "",
      "sync_with_timelapse": true,
      "max_fps": 120.0,
      "fps": 30.0,
      "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}",
      "selected_watermark": "",
      "overlay_text_alignment": "left",
      "description": "Generates MP4 with a fixed length of 10 seconds. Synchronizes with the default timelapse plugin.",
      "output_format": "mp4",
      "fps_calculation_type": "duration",
      "post_roll_seconds": 0.0,
      "bitrate": "5000k",
      "overlay_text_halign": "left",
      "name": "MP4 - Fixed Length - 00:10",
      "enabled": true,
      "enable_watermark": false,
      "pre_roll_seconds": 0.0,
      "overlay_font_size": 10,
      "run_length_seconds": 10.0,
      "overlay_text_pos": "[10, 10]"
    },
    {
      "overlay_text_template": "",
      "overlay_text_valign": "top",
      "thread_count": 1,
      "overlay_text_color": "[255, 255, 255, 128]",
      "min_fps": 2.0,
      "guid": "e1789a71-6d23-48ee-82eb-ed4a8fa69cb2",
      "overlay_font_path": "",
      "sync_with_timelapse": true,
      "max_fps": 120.0,
      "fps": 30.0,
      "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}",
      "selected_watermark": "",
      "overlay_text_alignment": "left",
      "description": "Renders MP4 at a constant 30FPS. Synchronizes with the default timelapse plugin.",
      "output_format": "mp4",
      "fps_calculation_type": "static",
      "post_roll_seconds": 0.0,
      "bitrate": "5000k",
      "overlay_text_halign": "left",
      "name": "MP4 - 30 FPS",
      "enabled": true,
      "enable_watermark": false,
      "pre_roll_seconds": 0.0,
      "overlay_font_size": 10,
      "run_length_seconds": 5.0,
      "overlay_text_pos": "[10, 10]"
    },
    {
      "overlay_text_template": "",
      "overlay_text_valign": "top",
      "thread_count": 1,
      "overlay_text_color": "[255, 255, 255, 128]",
      "min_fps": 2.0,
      "guid": "d5f8d9e6-0a0f-4872-b41c-cdf101418e3c",
      "overlay_font_path": "",
      "sync_with_timelapse": true,
      "max_fps": 120.0,
      "fps": 30.0,
      "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}",
      "selected_watermark": "",
      "overlay_text_alignment": "left",
      "description": "Generates MP4 with a fixed length of 60 seconds. Synchronizes with the default timelapse plugin.",
      "output_format": "mp4",
      "fps_calculation_type": "duration",
      "post_roll_seconds": 0.0,
      "bitrate": "5000k",
      "overlay_text_halign": "left",
      "name": "MP4 - Fixed Length - 01:00",
      "enabled": true,
      "enable_watermark": false,
      "pre_roll_seconds": 0.0,
      "overlay_font_size": 10,
      "run_length_seconds": 60.0,
      "overlay_text_pos": "[10, 10]"
    },
    {
      "overlay_text_template": "",
      "overlay_text_valign": "top",
      "thread_count": 1,
      "overlay_text_color": "[255, 255, 255, 128]",
      "min_fps": 2.0,
      "guid": "58ff3b6a-f597-4d0e-bcf6-1d2a9c2505cd",
      "overlay_font_path": "",
      "sync_with_timelapse": true,
      "max_fps": 120.0,
      "fps": 30.0,
      "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}",
      "selected_watermark": "",
      "overlay_text_alignment": "left",
      "description": "Generates MP4 with a fixed length of 5 seconds. Synchronizes with the default timelapse plugin.",
      "output_format": "mp4",
      "fps_calculation_type": "duration",
      "post_roll_seconds": 0.0,
      "bitrate": "5000k",
      "overlay_text_halign": "left",
      "name": "MP4 - Fixed Length - 00:30",
      "enabled": true,
      "enable_watermark": false,
      "pre_roll_seconds": 0.0,
      "overlay_font_size": 10,
      "run_length_seconds": 30.0,
      "overlay_text_pos": "[10, 10]"
    }
  ],
  "default_rendering_profile": {
    "overlay_text_template": "",
    "overlay_text_valign": "top",
    "thread_count": 1,
    "overlay_text_color": "[255, 255, 255, 128]",
    "min_fps": 2.0,
    "guid": "32d6ad28-0314-4a14-974c-0d7d92325f17",
    "overlay_font_path": "",
    "sync_with_timelapse": true,
    "max_fps": 120.0,
    "fps": 30,
    "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}",
    "selected_watermark": "",
    "overlay_text_alignment": "left",
    "description": "",
    "output_format": "mp4",
    "fps_calculation_type": "duration",
    "post_roll_seconds": 0,
    "bitrate": "5000k",
    "overlay_text_halign": "left",
    "name": "Default Rendering",
    "enabled": true,
    "enable_watermark": false,
    "pre_roll_seconds": 0,
    "overlay_font_size": 10,
    "run_length_seconds": 5,
    "overlay_text_pos": "[10, 10]"
  },
  "printers": [
    {
      "small_perimeter_speed": null,
      "bridging_speed_multiplier": 100.0,
      "perimeter_speed": null,
      "outline_speed_multiplier": 100.0,
      "first_layer_travel_speed": null,
      "top_solid_infill_speed": null,
      "top_solid_infill_speed_text": null,
      "movement_speed": 9000.0,
      "solid_infill_speed": null,
      "ooze_shield_speed": null,
      "guid": "7c0eb400-5a3e-45b3-aae9-cc01918a9bb6",
      "priming_height": 0.5,
      "small_perimeter_speed_multiplier": 100.0,
      "has_been_saved_by_user": false,
      "origin_z": null,
      "abort_out_of_bounds": true,
      "min_y": 0.0,
      "min_z": 0.0,
      "detract_speed": 2400.0,
      "suppress_snapshot_command_always": true,
      "default_firmware_retractions": false,
      "speed_tolerance": 0.6,
      "z_hop": 0.1,
      "maximum_z_speed": null,
      "infill_speed": null,
      "small_perimeter_speed_text": null,
      "max_z": 0.0,
      "e_axis_default_mode": "require-explicit",
      "external_perimeter_speed_multiplier": 100.0,
      "max_y": 0.0,
      "gap_fill_speed": null,
      "ooze_shield_speed_multiplier": 100.0,
      "description": "This is a beta profile, use at your own risk.",
      "support_structure_speed_multiplier": 100.0,
      "bridge_speed": null,
      "first_layer_speed_multiplier": 100.0,
      "solid_infill_speed_text": null,
      "slicer_type": "other",
      "top_solid_infill_speed_multiplier": 100.0,
      "g90_influences_extruder": "use-octoprint-settings",
      "external_perimeter_speed_text": null,
      "solid_infill_speed_multiplier": 100.0,
      "origin_y": null,
      "origin_x": null,
      "above_raft_speed_multiplier": 100.0,
      "min_x": 0.0,
      "print_speed": null,
      "first_layer_speed": null,
      "retract_speed": 2400.0,
      "default_firmware_retractions_zhop": false,
      "axis_speed_display_units": "mm-min",
      "auto_position_detection_commands": "",
      "prime_pillar_speed_multiplier": 100.0,
      "name": "Monoprice Maker Select v2/Wanhao Duplicator i3 - Beta",
      "retract_length": 0.6,
      "snapshot_command": "snap",
      "override_octoprint_print_volume": false,
      "support_speed": null,
      "external_perimeter_speed": null,
      "skirt_brim_speed": null,
      "first_layer_speed_text": null,
      "z_hop_speed": 9000.0,
      "num_slow_layers": 0,
      "max_x": 0.0,
      "prime_pillar_speed": null,
      "printer_position_confirmation_tolerance": 0.001,
      "units_default": "millimeters",
      "xyz_axes_default_mode": "require-explicit",
      "auto_detect_position": true,
      "above_raft_speed": null
    },
    {
      "small_perimeter_speed": null,
      "bridging_speed_multiplier": 100.0,
      "perimeter_speed": null,
      "outline_speed_multiplier": 100.0,
      "first_layer_travel_speed": null,
      "top_solid_infill_speed": null,
      "top_solid_infill_speed_text": null,
      "movement_speed": 6000.0,
      "solid_infill_speed": null,
      "ooze_shield_speed": null,
      "guid": "c75d2855-61c4-4aad-8aa7-bf03ac0da632",
      "priming_height": 0.75,
      "small_perimeter_speed_multiplier": 100.0,
      "has_been_saved_by_user": false,
      "origin_z": 10.0,
      "abort_out_of_bounds": false,
      "min_y": -9.0,
      "min_z": 0.0,
      "detract_speed": 3000.0,
      "suppress_snapshot_command_always": true,
      "default_firmware_retractions": false,
      "speed_tolerance": 0.6,
      "z_hop": 0.5,
      "maximum_z_speed": null,
      "infill_speed": null,
      "small_perimeter_speed_text": null,
      "max_z": 250.0,
      "e_axis_default_mode": "require-explicit",
      "external_perimeter_speed_multiplier": 100.0,
      "max_y": 289.0,
      "gap_fill_speed": null,
      "ooze_shield_speed_multiplier": 100.0,
      "description": "This is a beta profile, use at your own risk.  Submitted by bluecamel.",
      "support_structure_speed_multiplier": 100.0,
      "bridge_speed": null,
      "first_layer_speed_multiplier": 100.0,
      "solid_infill_speed_text": null,
      "slicer_type": "other",
      "top_solid_infill_speed_multiplier": 100.0,
      "g90_influences_extruder": "use-octoprint-settings",
      "external_perimeter_speed_text": null,
      "solid_infill_speed_multiplier": 100.0,
      "origin_y": 10.0,
      "origin_x": 20.0,
      "above_raft_speed_multiplier": 100.0,
      "min_x": -20.0,
      "print_speed": null,
      "first_layer_speed": null,
      "retract_speed": 4000.0,
      "default_firmware_retractions_zhop": false,
      "axis_speed_display_units": "mm-min",
      "auto_position_detection_commands": "",
      "prime_pillar_speed_multiplier": 100.0,
      "name": "Lulzbot Taz 6 - Beta",
      "retract_length": 2.0,
      "snapshot_command": "snap",
      "override_octoprint_print_volume": true,
      "support_speed": null,
      "external_perimeter_speed": null,
      "skirt_brim_speed": null,
      "first_layer_speed_text": null,
      "z_hop_speed": 6000.0,
      "num_slow_layers": 0,
      "max_x": 289.0,
      "prime_pillar_speed": null,
      "printer_position_confirmation_tolerance": 0.001,
      "units_default": "millimeters",
      "xyz_axes_default_mode": "require-explicit",
      "auto_detect_position": true,
      "above_raft_speed": null
    },
    {
      "small_perimeter_speed": 15.0,
      "bridging_speed_multiplier": null,
      "perimeter_speed": 60.0,
      "outline_speed_multiplier": null,
      "first_layer_travel_speed": 130.0,
      "top_solid_infill_speed": 15.0,
      "top_solid_infill_speed_text": "15",
      "movement_speed": 130.0,
      "solid_infill_speed": 20.0,
      "ooze_shield_speed": null,
      "guid": "6b3df448-eaee-4077-970d-0cdf276a6063",
      "priming_height": 0.75,
      "small_perimeter_speed_multiplier": null,
      "has_been_saved_by_user": true,
      "origin_z": null,
      "abort_out_of_bounds": false,
      "min_y": -10.0,
      "min_z": -10.0,
      "detract_speed": 60.0,
      "suppress_snapshot_command_always": true,
      "default_firmware_retractions": false,
      "speed_tolerance": 8.333333333333333e-05,
      "z_hop": 0.6,
      "maximum_z_speed": null,
      "infill_speed": 20.0,
      "small_perimeter_speed_text": "15",
      "max_z": 260.0,
      "e_axis_default_mode": "require-explicit",
      "external_perimeter_speed_multiplier": 50.0,
      "max_y": 230.0,
      "gap_fill_speed": 20.0,
      "ooze_shield_speed_multiplier": null,
      "description": "Genuine Prusa Mk3",
      "support_structure_speed_multiplier": null,
      "bridge_speed": 60.0,
      "first_layer_speed_multiplier": null,
      "solid_infill_speed_text": "20",
      "slicer_type": "slic3r-pe",
      "top_solid_infill_speed_multiplier": null,
      "g90_influences_extruder": "use-octoprint-settings",
      "external_perimeter_speed_text": "50%",
      "solid_infill_speed_multiplier": null,
      "origin_y": null,
      "origin_x": null,
      "above_raft_speed_multiplier": null,
      "min_x": -10.0,
      "print_speed": null,
      "first_layer_speed": 20.0,
      "retract_speed": 60.0,
      "default_firmware_retractions_zhop": false,
      "axis_speed_display_units": "mm-sec",
      "auto_position_detection_commands": "",
      "prime_pillar_speed_multiplier": null,
      "name": "Ender3",
      "retract_length": 2.0,
      "snapshot_command": "snap",
      "override_octoprint_print_volume": true,
      "support_speed": 60.0,
      "external_perimeter_speed": 30.0,
      "skirt_brim_speed": null,
      "first_layer_speed_text": "20",
      "z_hop_speed": 130.0,
      "num_slow_layers": 1,
      "max_x": 230.0,
      "prime_pillar_speed": null,
      "printer_position_confirmation_tolerance": 0.001,
      "units_default": "millimeters",
      "xyz_axes_default_mode": "absolute",
      "auto_detect_position": true,
      "above_raft_speed": null
    },
    {
      "small_perimeter_speed": null,
      "bridging_speed_multiplier": 100.0,
      "perimeter_speed": null,
      "outline_speed_multiplier": 100.0,
      "first_layer_travel_speed": null,
      "top_solid_infill_speed": null,
      "top_solid_infill_speed_text": null,
      "movement_speed": 3000.0,
      "solid_infill_speed": null,
      "ooze_shield_speed": null,
      "guid": "ad8d89b2-a579-4b3b-9249-6e5fab9348ca",
      "priming_height": 0.5,
      "small_perimeter_speed_multiplier": 100.0,
      "has_been_saved_by_user": false,
      "origin_z": 0.0,
      "abort_out_of_bounds": true,
      "min_y": 0.0,
      "min_z": 0.0,
      "detract_speed": 2400.0,
      "suppress_snapshot_command_always": true,
      "default_firmware_retractions": false,
      "speed_tolerance": 0.6,
      "z_hop": 0.0,
      "maximum_z_speed": null,
      "infill_speed": null,
      "small_perimeter_speed_text": null,
      "max_z": 240.0,
      "e_axis_default_mode": "absolute",
      "external_perimeter_speed_multiplier": 100.0,
      "max_y": 220.0,
      "gap_fill_speed": null,
      "ooze_shield_speed_multiplier": 100.0,
      "description": "This is a beta profile, use at your own risk.",
      "support_structure_speed_multiplier": 100.0,
      "bridge_speed": null,
      "first_layer_speed_multiplier": 100.0,
      "solid_infill_speed_text": null,
      "slicer_type": "other",
      "top_solid_infill_speed_multiplier": 100.0,
      "g90_influences_extruder": "true",
      "external_perimeter_speed_text": null,
      "solid_infill_speed_multiplier": 100.0,
      "origin_y": 0.0,
      "origin_x": 0.0,
      "above_raft_speed_multiplier": 100.0,
      "min_x": 0.0,
      "print_speed": null,
      "first_layer_speed": null,
      "retract_speed": 2400.0,
      "default_firmware_retractions_zhop": false,
      "axis_speed_display_units": "mm-min",
      "auto_position_detection_commands": "",
      "prime_pillar_speed_multiplier": 100.0,
      "name": "Anet A8 - Beta",
      "retract_length": 4.5,
      "snapshot_command": "snap",
      "override_octoprint_print_volume": false,
      "support_speed": null,
      "external_perimeter_speed": null,
      "skirt_brim_speed": null,
      "first_layer_speed_text": null,
      "z_hop_speed": 3000.0,
      "num_slow_layers": 0,
      "max_x": 220.0,
      "prime_pillar_speed": null,
      "printer_position_confirmation_tolerance": 0.001,
      "units_default": "millimeters",
      "xyz_axes_default_mode": "require-explicit",
      "auto_detect_position": false,
      "above_raft_speed": null
    },
    {
      "small_perimeter_speed": null,
      "bridging_speed_multiplier": 100.0,
      "perimeter_speed": null,
      "outline_speed_multiplier": 100.0,
      "first_layer_travel_speed": null,
      "top_solid_infill_speed": null,
      "top_solid_infill_speed_text": null,
      "movement_speed": 0.0,
      "solid_infill_speed": null,
      "ooze_shield_speed": null,
      "guid": "73a5f790-3e54-42a5-b1d7-1da542d28ae8",
      "priming_height": 0.75,
      "small_perimeter_speed_multiplier": 100.0,
      "has_been_saved_by_user": false,
      "origin_z": null,
      "abort_out_of_bounds": true,
      "min_y": -100.0,
      "min_z": 0.0,
      "detract_speed": 0.0,
      "suppress_snapshot_command_always": true,
      "default_firmware_retractions": false,
      "speed_tolerance": 0.6,
      "z_hop": 0.5,
      "maximum_z_speed": null,
      "infill_speed": null,
      "small_perimeter_speed_text": null,
      "max_z": 205.0,
      "e_axis_default_mode": "relative",
      "external_perimeter_speed_multiplier": 100.0,
      "max_y": 100.0,
      "gap_fill_speed": null,
      "ooze_shield_speed_multiplier": 100.0,
      "description": "This is a beta profile, use at your own risk.",
      "support_structure_speed_multiplier": 100.0,
      "bridge_speed": null,
      "first_layer_speed_multiplier": 100.0,
      "solid_infill_speed_text": null,
      "slicer_type": "other",
      "top_solid_infill_speed_multiplier": 100.0,
      "g90_influences_extruder": "use-octoprint-settings",
      "external_perimeter_speed_text": null,
      "solid_infill_speed_multiplier": 100.0,
      "origin_y": null,
      "origin_x": null,
      "above_raft_speed_multiplier": 100.0,
      "min_x": -100.0,
      "print_speed": null,
      "first_layer_speed": null,
      "retract_speed": 0.0,
      "default_firmware_retractions_zhop": false,
      "axis_speed_display_units": "mm-min",
      "auto_position_detection_commands": "",
      "prime_pillar_speed_multiplier": 100.0,
      "name": "Dagoma Neva - Beta",
      "retract_length": 10.0,
      "snapshot_command": "snap",
      "override_octoprint_print_volume": true,
      "support_speed": null,
      "external_perimeter_speed": null,
      "skirt_brim_speed": null,
      "first_layer_speed_text": null,
      "z_hop_speed": 0.0,
      "num_slow_layers": 0,
      "max_x": 100.0,
      "prime_pillar_speed": null,
      "printer_position_confirmation_tolerance": 0.001,
      "units_default": "millimeters",
      "xyz_axes_default_mode": "relative",
      "auto_detect_position": true,
      "above_raft_speed": null
    },
    {
      "small_perimeter_speed": null,
      "bridging_speed_multiplier": 100.0,
      "perimeter_speed": null,
      "outline_speed_multiplier": 100.0,
      "first_layer_travel_speed": null,
      "top_solid_infill_speed": null,
      "top_solid_infill_speed_text": null,
      "movement_speed": 2700.0,
      "solid_infill_speed": null,
      "ooze_shield_speed": null,
      "guid": "20da9504-2860-452b-9c9a-7ad18d436407",
      "priming_height": 0.75,
      "small_perimeter_speed_multiplier": 100.0,
      "has_been_saved_by_user": false,
      "origin_z": null,
      "abort_out_of_bounds": true,
      "min_y": 0.0,
      "min_z": 0.0,
      "detract_speed": 2100.0,
      "suppress_snapshot_command_always": true,
      "default_firmware_retractions": false,
      "speed_tolerance": 0.6,
      "z_hop": 0.4,
      "maximum_z_speed": null,
      "infill_speed": null,
      "small_perimeter_speed_text": null,
      "max_z": 0.0,
      "e_axis_default_mode": "require-explicit",
      "external_perimeter_speed_multiplier": 100.0,
      "max_y": 0.0,
      "gap_fill_speed": null,
      "ooze_shield_speed_multiplier": 100.0,
      "description": "This is a beta profile, use at your own risk.",
      "support_structure_speed_multiplier": 100.0,
      "bridge_speed": null,
      "first_layer_speed_multiplier": 100.0,
      "solid_infill_speed_text": null,
      "slicer_type": "other",
      "top_solid_infill_speed_multiplier": 100.0,
      "g90_influences_extruder": "use-octoprint-settings",
      "external_perimeter_speed_text": null,
      "solid_infill_speed_multiplier": 100.0,
      "origin_y": null,
      "origin_x": null,
      "above_raft_speed_multiplier": 100.0,
      "min_x": 0.0,
      "print_speed": null,
      "first_layer_speed": null,
      "retract_speed": 2400.0,
      "default_firmware_retractions_zhop": false,
      "axis_speed_display_units": "mm-min",
      "auto_position_detection_commands": "",
      "prime_pillar_speed_multiplier": 100.0,
      "name": "Anycubic I3 Mega - Beta",
      "retract_length": 6.0,
      "snapshot_command": "snap",
      "override_octoprint_print_volume": false,
      "support_speed": null,
      "external_perimeter_speed": null,
      "skirt_brim_speed": null,
      "first_layer_speed_text": null,
      "z_hop_speed": 1000.0,
      "num_slow_layers": 0,
      "max_x": 0.0,
      "prime_pillar_speed": null,
      "printer_position_confirmation_tolerance": 0.001,
      "units_default": "millimeters",
      "xyz_axes_default_mode": "require-explicit",
      "auto_detect_position": true,
      "above_raft_speed": null
    },
    {
      "small_perimeter_speed": null,
      "bridging_speed_multiplier": 100.0,
      "perimeter_speed": null,
      "outline_speed_multiplier": 100.0,
      "first_layer_travel_speed": 100.0,
      "top_solid_infill_speed": null,
      "top_solid_infill_speed_text": null,
      "movement_speed": 100.0,
      "solid_infill_speed": null,
      "ooze_shield_speed": null,
      "guid": "88a173b1-0071-4d93-84fa-6662af279e5e",
      "priming_height": 0.75,
      "small_perimeter_speed_multiplier": 100.0,
      "has_been_saved_by_user": false,
      "origin_z": null,
      "abort_out_of_bounds": true,
      "min_y": -3.0,
      "min_z": 0.0,
      "detract_speed": 50.0,
      "suppress_snapshot_command_always": true,
      "default_firmware_retractions": false,
      "speed_tolerance": 0.01,
      "z_hop": 0.5,
      "maximum_z_speed": null,
      "infill_speed": null,
      "small_perimeter_speed_text": null,
      "max_z": 200.0,
      "e_axis_default_mode": "require-explicit",
      "external_perimeter_speed_multiplier": 100.0,
      "max_y": 210.0,
      "gap_fill_speed": null,
      "ooze_shield_speed_multiplier": 100.0,
      "description": "Genuine Prusa Mk2/Mk2S",
      "support_structure_speed_multiplier": 100.0,
      "bridge_speed": null,
      "first_layer_speed_multiplier": 100.0,
      "solid_infill_speed_text": null,
      "slicer_type": "slic3r-pe",
      "top_solid_infill_speed_multiplier": 100.0,
      "g90_influences_extruder": "use-octoprint-settings",
      "external_perimeter_speed_text": null,
      "solid_infill_speed_multiplier": 100.0,
      "origin_y": null,
      "origin_x": null,
      "above_raft_speed_multiplier": 100.0,
      "min_x": 0.0,
      "print_speed": null,
      "first_layer_speed": null,
      "retract_speed": 66.67,
      "default_firmware_retractions_zhop": false,
      "axis_speed_display_units": "mm-sec",
      "auto_position_detection_commands": "",
      "prime_pillar_speed_multiplier": 100.0,
      "name": "Prusa Mk2/Mk2S",
      "retract_length": 2.0,
      "snapshot_command": "snap",
      "override_octoprint_print_volume": true,
      "support_speed": null,
      "external_perimeter_speed": null,
      "skirt_brim_speed": null,
      "first_layer_speed_text": null,
      "z_hop_speed": 100.0,
      "num_slow_layers": 0,
      "max_x": 250.0,
      "prime_pillar_speed": null,
      "printer_position_confirmation_tolerance": 0.001,
      "units_default": "millimeters",
      "xyz_axes_default_mode": "require-explicit",
      "auto_detect_position": true,
      "above_raft_speed": null
    },
    {
      "small_perimeter_speed": null,
      "bridging_speed_multiplier": 100.0,
      "perimeter_speed": null,
      "outline_speed_multiplier": 100.0,
      "first_layer_travel_speed": null,
      "top_solid_infill_speed": null,
      "top_solid_infill_speed_text": null,
      "movement_speed": 3600.0,
      "solid_infill_speed": null,
      "ooze_shield_speed": null,
      "guid": "fdc7000c-9bc3-4dd2-bc2e-85f9ebcc3c7c",
      "priming_height": 0.75,
      "small_perimeter_speed_multiplier": 100.0,
      "has_been_saved_by_user": false,
      "origin_z": 0.0,
      "abort_out_of_bounds": true,
      "min_y": 0.0,
      "min_z": 0.0,
      "detract_speed": 3000.0,
      "suppress_snapshot_command_always": true,
      "default_firmware_retractions": false,
      "speed_tolerance": 0.6,
      "z_hop": 0.2,
      "maximum_z_speed": null,
      "infill_speed": null,
      "small_perimeter_speed_text": null,
      "max_z": 0.0,
      "e_axis_default_mode": "require-explicit",
      "external_perimeter_speed_multiplier": 100.0,
      "max_y": 0.0,
      "gap_fill_speed": null,
      "ooze_shield_speed_multiplier": 100.0,
      "description": "This is a beta profile, use at your own risk.",
      "support_structure_speed_multiplier": 100.0,
      "bridge_speed": null,
      "first_layer_speed_multiplier": 100.0,
      "solid_infill_speed_text": null,
      "slicer_type": "other",
      "top_solid_infill_speed_multiplier": 100.0,
      "g90_influences_extruder": "use-octoprint-settings",
      "external_perimeter_speed_text": null,
      "solid_infill_speed_multiplier": 100.0,
      "origin_y": 0.0,
      "origin_x": 0.0,
      "above_raft_speed_multiplier": 100.0,
      "min_x": 0.0,
      "print_speed": null,
      "first_layer_speed": null,
      "retract_speed": 5100.0,
      "default_firmware_retractions_zhop": false,
      "axis_speed_display_units": "mm-min",
      "auto_position_detection_commands": "",
      "prime_pillar_speed_multiplier": 100.0,
      "name": "CR-10 - Beta",
      "retract_length": 6.5,
      "snapshot_command": "snap",
      "override_octoprint_print_volume": false,
      "support_speed": null,
      "external_perimeter_speed": null,
      "skirt_brim_speed": null,
      "first_layer_speed_text": null,
      "z_hop_speed": 1000.0,
      "num_slow_layers": 0,
      "max_x": 0.0,
      "prime_pillar_speed": null,
      "printer_position_confirmation_tolerance": 0.001,
      "units_default": "millimeters",
      "xyz_axes_default_mode": "require-explicit",
      "auto_detect_position": true,
      "above_raft_speed": null
    },
    {
      "small_perimeter_speed": null,
      "bridging_speed_multiplier": 100.0,
      "perimeter_speed": null,
      "outline_speed_multiplier": 100.0,
      "first_layer_travel_speed": 180.0,
      "top_solid_infill_speed": null,
      "top_solid_infill_speed_text": null,
      "movement_speed": 180.0,
      "solid_infill_speed": null,
      "ooze_shield_speed": null,
      "guid": "42d2f5ec-7cc8-4d65-aec8-9015ecff7db6",
      "priming_height": 0.75,
      "small_perimeter_speed_multiplier": 100.0,
      "has_been_saved_by_user": false,
      "origin_z": null,
      "abort_out_of_bounds": true,
      "min_y": -3.0,
      "min_z": 0.0,
      "detract_speed": 50.0,
      "suppress_snapshot_command_always": true,
      "default_firmware_retractions": false,
      "speed_tolerance": 0.01,
      "z_hop": 0.6,
      "maximum_z_speed": null,
      "infill_speed": null,
      "small_perimeter_speed_text": null,
      "max_z": 200.0,
      "e_axis_default_mode": "require-explicit",
      "external_perimeter_speed_multiplier": 100.0,
      "max_y": 210.0,
      "gap_fill_speed": null,
      "ooze_shield_speed_multiplier": 100.0,
      "description": "Genuine Prusa Mk2/Mk2S With Multi-Material",
      "support_structure_speed_multiplier": 100.0,
      "bridge_speed": null,
      "first_layer_speed_multiplier": 100.0,
      "solid_infill_speed_text": null,
      "slicer_type": "slic3r-pe",
      "top_solid_infill_speed_multiplier": 100.0,
      "g90_influences_extruder": "use-octoprint-settings",
      "external_perimeter_speed_text": null,
      "solid_infill_speed_multiplier": 100.0,
      "origin_y": null,
      "origin_x": null,
      "above_raft_speed_multiplier": 100.0,
      "min_x": 0.0,
      "print_speed": null,
      "first_layer_speed": null,
      "retract_speed": 80.0,
      "default_firmware_retractions_zhop": false,
      "axis_speed_display_units": "mm-sec",
      "auto_position_detection_commands": "",
      "prime_pillar_speed_multiplier": 100.0,
      "name": "Prusa Mk2/Mk2S Multi Material",
      "retract_length": 4.0,
      "snapshot_command": "snap",
      "override_octoprint_print_volume": true,
      "support_speed": null,
      "external_perimeter_speed": null,
      "skirt_brim_speed": null,
      "first_layer_speed_text": null,
      "z_hop_speed": 180.0,
      "num_slow_layers": 0,
      "max_x": 250.0,
      "prime_pillar_speed": null,
      "printer_position_confirmation_tolerance": 0.001,
      "units_default": "millimeters",
      "xyz_axes_default_mode": "require-explicit",
      "auto_detect_position": true,
      "above_raft_speed": null
    },
    {
      "small_perimeter_speed": null,
      "bridging_speed_multiplier": 100.0,
      "perimeter_speed": null,
      "outline_speed_multiplier": 100.0,
      "first_layer_travel_speed": null,
      "top_solid_infill_speed": null,
      "top_solid_infill_speed_text": null,
      "movement_speed": 2500.0,
      "solid_infill_speed": null,
      "ooze_shield_speed": null,
      "guid": "8adbbe77-d6ea-4e6e-8c7a-21a51733695a",
      "priming_height": 0.75,
      "small_perimeter_speed_multiplier": 100.0,
      "has_been_saved_by_user": false,
      "origin_z": null,
      "abort_out_of_bounds": true,
      "min_y": 0.0,
      "min_z": 0.0,
      "detract_speed": 2500.0,
      "suppress_snapshot_command_always": true,
      "default_firmware_retractions": false,
      "speed_tolerance": 0.6,
      "z_hop": 0.0,
      "maximum_z_speed": null,
      "infill_speed": null,
      "small_perimeter_speed_text": null,
      "max_z": 0.0,
      "e_axis_default_mode": "require-explicit",
      "external_perimeter_speed_multiplier": 100.0,
      "max_y": 0.0,
      "gap_fill_speed": null,
      "ooze_shield_speed_multiplier": 100.0,
      "description": "This is a beta profile, use at your own risk.",
      "support_structure_speed_multiplier": 100.0,
      "bridge_speed": null,
      "first_layer_speed_multiplier": 100.0,
      "solid_infill_speed_text": null,
      "slicer_type": "other",
      "top_solid_infill_speed_multiplier": 100.0,
      "g90_influences_extruder": "use-octoprint-settings",
      "external_perimeter_speed_text": null,
      "solid_infill_speed_multiplier": 100.0,
      "origin_y": null,
      "origin_x": null,
      "above_raft_speed_multiplier": 100.0,
      "min_x": 0.0,
      "print_speed": null,
      "first_layer_speed": null,
      "retract_speed": 2500.0,
      "default_firmware_retractions_zhop": false,
      "axis_speed_display_units": "mm-min",
      "auto_position_detection_commands": "",
      "prime_pillar_speed_multiplier": 100.0,
      "name": "Irapid Black - Beta",
      "retract_length": 2.0,
      "snapshot_command": "snap",
      "override_octoprint_print_volume": false,
      "support_speed": null,
      "external_perimeter_speed": null,
      "skirt_brim_speed": null,
      "first_layer_speed_text": null,
      "z_hop_speed": 0.0,
      "num_slow_layers": 0,
      "max_x": 0.0,
      "prime_pillar_speed": null,
      "printer_position_confirmation_tolerance": 0.001,
      "units_default": "millimeters",
      "xyz_axes_default_mode": "require-explicit",
      "auto_detect_position": true,
      "above_raft_speed": null
    }
  ],
  "camera_type_options": [
    {
      "name": "Webcam",
      "value": "webcam"
    },
    {
      "name": "External Camera - Script",
      "value": "external-script"
    },
    {
      "name": "Gcode Camera (built into printer)",
      "value": "printer-gcode"
    }
  ],
  "trigger_types": [
    {
      "name": "Layer/Height",
      "value": "layer"
    },
    {
      "name": "Timer",
      "value": "timer"
    },
    {
      "name": "Gcode",
      "value": "gcode"
    }
  ],
  "overlay_text_valign_options": [
    "top",
    "middle",
    "bottom"
  ],
  "camera_exposure_type_options": [
    {
      "name": "Unknown - Let me know if you know what this option does.",
      "value": "0"
    },
    {
      "name": "Manual",
      "value": "1"
    },
    {
      "name": "Unknown - Let me know if you know what this option does.",
      "value": "2"
    },
    {
      "name": "Auto - Aperture Priority Mode",
      "value": "3"
    }
  ],
  "slicer_type_options": [
    {
      "name": "Cura",
      "value": "cura"
    },
    {
      "name": "Simplify 3D",
      "value": "simplify-3d"
    },
    {
      "name": "Slic3r Prusa Edition",
      "value": "slic3r-pe"
    },
    {
      "name": "Other Slicer",
      "value": "other"
    }
  ],
  "position_restriction_shapes": [
    {
      "name": "Rectangle",
      "value": "rect"
    },
    {
      "name": "Circle",
      "value": "circle"
    }
  ],
  "axis_speed_display_unit_options": [
    {
      "name": "Millimeters per Minute (mm/min)",
      "value": "mm-min"
    },
    {
      "name": "Millimeters per Second (mm/sec)",
      "value": "mm-sec"
    }
  ],
  "overlay_text_halign_options": [
    "left",
    "center",
    "right"
  ],
  "rendering_file_templates": [
    "FAILEDFLAG",
    "FAILEDSTATE",
    "FAILEDSEPARATOR",
    "PRINTSTATE",
    "GCODEFILENAME",
    "DATETIMESTAMP",
    "PRINTENDTIME",
    "PRINTENDTIMESTAMP",
    "PRINTSTARTTIME",
    "PRINTSTARTTIMESTAMP",
    "SNAPSHOTCOUNT",
    "FPS"
  ],
  "rendering_fps_calculation_options": [
    {
      "name": "Static FPS",
      "value": "static"
    },
    {
      "name": "Fixed Run Length",
      "value": "duration"
    }
  ],
  "current_rendering_profile_guid": "d4898ba7-8d27-4479-b7d8-34c063ae7a68",
  "auto_reload_frames": 20,
  "overlay_text_alignment_options": [
    "left",
    "center",
    "right"
  ],
  "debug_profiles": [
    {
      "gcode_queuing_all": false,
      "extruder_change": false,
      "position_change": false,
      "description": "Test your timelapse settings without using any filament.  This feature is experimental, so make sure you unload your filament and monitor your printer during the test.",
      "trigger_height_change": false,
      "render_fail": false,
      "log_to_console": false,
      "is_test_mode": true,
      "render_sync": false,
      "snapshot_gcode_endcommand": false,
      "render_complete": false,
      "trigger_triggering": false,
      "snapshot_position": false,
      "snapshot_position_resume_print": false,
      "gcode_received_all": false,
      "print_state_changed": false,
      "guid": "3811da8f-182d-44bf-8fcb-95614e4daf1b",
      "trigger_layer_change": false,
      "trigger_create": false,
      "snapshot_download": false,
      "trigger_triggering_state": false,
      "snapshot_clean": false,
      "snapshot_position_return": false,
      "camera_settings_apply": false,
      "name": "Test Mode",
      "snapshot_save": false,
      "settings_save": false,
      "enabled": true,
      "settings_load": false,
      "extruder_triggered": false,
      "trigger_zhop": false,
      "trigger_wait_state": false,
      "trigger_time_unpaused": false,
      "trigger_time_remaining": false,
      "gcode_sent_all": false,
      "snapshot_gcode": false,
      "render_start": false,
      "position_command_received": false
    },
    {
      "gcode_queuing_all": true,
      "extruder_change": true,
      "position_change": true,
      "description": "Logs all optional information during a live print.  This will create a very large log file, so only use this when necessary, or create a new debug profile containing less information.",
      "trigger_height_change": true,
      "render_fail": true,
      "log_to_console": false,
      "is_test_mode": false,
      "render_sync": true,
      "snapshot_gcode_endcommand": true,
      "render_complete": true,
      "trigger_triggering": true,
      "snapshot_position": true,
      "snapshot_position_resume_print": true,
      "gcode_received_all": true,
      "print_state_changed": true,
      "guid": "68d000d6-0ae3-40f4-9b16-bdcb882604a6",
      "trigger_layer_change": true,
      "trigger_create": true,
      "snapshot_download": true,
      "trigger_triggering_state": true,
      "snapshot_clean": true,
      "snapshot_position_return": true,
      "camera_settings_apply": true,
      "name": "Full Diagnostic - Live Print",
      "snapshot_save": true,
      "settings_save": true,
      "enabled": true,
      "settings_load": true,
      "extruder_triggered": true,
      "trigger_zhop": true,
      "trigger_wait_state": true,
      "trigger_time_unpaused": true,
      "trigger_time_remaining": true,
      "gcode_sent_all": true,
      "snapshot_gcode": true,
      "render_start": true,
      "position_command_received": true
    },
    {
      "gcode_queuing_all": false,
      "extruder_change": false,
      "position_change": false,
      "description": "",
      "trigger_height_change": false,
      "render_fail": false,
      "log_to_console": false,
      "is_test_mode": false,
      "render_sync": false,
      "snapshot_gcode_endcommand": false,
      "render_complete": false,
      "trigger_triggering": false,
      "snapshot_position": false,
      "snapshot_position_resume_print": false,
      "gcode_received_all": false,
      "print_state_changed": false,
      "guid": "63547b6b-f7a6-441c-8ab2-a52dae7df3ac",
      "trigger_layer_change": false,
      "trigger_create": false,
      "snapshot_download": false,
      "trigger_triggering_state": false,
      "snapshot_clean": false,
      "snapshot_position_return": false,
      "camera_settings_apply": false,
      "name": "No Logging",
      "snapshot_save": false,
      "settings_save": false,
      "enabled": true,
      "settings_load": false,
      "extruder_triggered": false,
      "trigger_zhop": false,
      "trigger_wait_state": false,
      "trigger_time_unpaused": false,
      "trigger_time_remaining": false,
      "gcode_sent_all": false,
      "snapshot_gcode": false,
      "render_start": false,
      "position_command_received": false
    },
    {
      "gcode_queuing_all": true,
      "extruder_change": true,
      "position_change": true,
      "description": "Logs all optional information during a test print.  This will create a very large log file, so only use this when necessary, or create a new debug profile containing less information.",
      "trigger_height_change": true,
      "render_fail": true,
      "log_to_console": false,
      "is_test_mode": true,
      "render_sync": true,
      "snapshot_gcode_endcommand": true,
      "render_complete": true,
      "trigger_triggering": true,
      "snapshot_position": true,
      "snapshot_position_resume_print": true,
      "gcode_received_all": true,
      "print_state_changed": true,
      "guid": "072f506e-3e5e-4e84-922b-fb4e01690398",
      "trigger_layer_change": true,
      "trigger_create": true,
      "snapshot_download": true,
      "trigger_triggering_state": true,
      "snapshot_clean": true,
      "snapshot_position_return": true,
      "camera_settings_apply": true,
      "name": "Full Diagnostic - Test Mode",
      "snapshot_save": true,
      "settings_save": true,
      "enabled": true,
      "settings_load": true,
      "extruder_triggered": true,
      "trigger_zhop": true,
      "trigger_wait_state": true,
      "trigger_time_unpaused": true,
      "trigger_time_remaining": true,
      "gcode_sent_all": true,
      "snapshot_gcode": true,
      "render_start": true,
      "position_command_received": true
    }
  ],
  "default_camera_profile": {
    "on_after_render_script": "",
    "exposure_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094850&group=1&value={value}",
    "sharpness": 128,
    "focus": 28,
    "backlight_compensation_enabled": false,
    "guid": "6b3361a7-82b7-4abf-b3d1-e3046d457d8c",
    "saturation_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963778&group=1&value={value}",
    "on_before_snapshot_script": "",
    "timeout_ms": 5000,
    "led1_mode": "auto",
    "autofocus_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094860&group=1&value={value}",
    "led1_mode_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=168062213&group=1&value={value}",
    "exposure_auto_priority_enabled": true,
    "username": "",
    "saturation": 128,
    "autofocus_enabled": true,
    "external_camera_snapshot_script": "",
    "sharpness_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963803&group=1&value={value}",
    "on_before_render_script": "",
    "gain": 100,
    "password": "",
    "name": "Default Camera",
    "brightness": 128,
    "pan_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094856&group=1&value={value}",
    "enabled": true,
    "zoom": 100,
    "contrast": 128,
    "contrast_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963777&group=1&value={value}",
    "white_balance_temperature": 4000,
    "jpeg_quality_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=1&group=3&value={value}",
    "brightness_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963776&group=1&value={value}",
    "snapshot_request_template": "{camera_address}?action=snapshot",
    "white_balance_temperature_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963802&group=1&value={value}",
    "ignore_ssl_error": false,
    "tilt": 0,
    "exposure_type_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094849&group=1&value={value}",
    "delay": 125,
    "exposure_auto_priority_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094851&group=1&value={value}",
    "camera_type": "webcam",
    "zoom_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094861&group=1&value={value}",
    "exposure_type": 1,
    "pan": 0,
    "led1_frequency_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=168062214&group=1&value={value}",
    "apply_settings_before_print": false,
    "description": "",
    "white_balance_auto": true,
    "white_balance_auto_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963788&group=1&value={value}",
    "led1_frequency": 0,
    "backlight_compensation_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963804&group=1&value={value}",
    "gain_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963795&group=1&value={value}",
    "snapshot_transpose": "",
    "powerline_frequency_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963800&group=1&value={value}",
    "focus_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094858&group=1&value={value}",
    "address": "http://127.0.0.1:8080/",
    "tilt_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094857&group=1&value={value}",
    "exposure": 250,
    "gcode_camera_script": "",
    "jpeg_quality": 90,
    "powerline_frequency": 60,
    "on_print_start_script": "",
    "on_after_snapshot_script": ""
  },
  "show_extruder_state_changes": true,
  "default_snapshot_profile": {
    "feature_trigger_on_prime_pillar": true,
    "feature_trigger_on_skirt_brim": false,
    "trigger_on_retracted": "",
    "guid": "5d16f0cb-512c-476a-b32d-a10191ad0d0e",
    "trigger_on_detracting": "",
    "trigger_type": "layer",
    "feature_trigger_on_infill": true,
    "feature_trigger_on_movement": false,
    "feature_trigger_on_top_solid_infill": true,
    "trigger_on_detracting_start": "",
    "feature_trigger_on_supports": false,
    "feature_trigger_on_first_layer_travel": false,
    "feature_restrictions_enabled": false,
    "feature_trigger_on_bridges": false,
    "require_zhop": false,
    "feature_trigger_on_solid_infill": true,
    "trigger_on_extruding": "",
    "feature_trigger_on_detract": false,
    "retract_before_move": true,
    "feature_trigger_on_gap_fills": true,
    "feature_trigger_on_ooze_shield": false,
    "extruder_state_requirements_enabled": false,
    "cleanup_after_render_fail": false,
    "trigger_on_primed": "",
    "name": "Default Snapshot",
    "trigger_on_retracting": "",
    "feature_trigger_on_normal_print_speed": false,
    "feature_trigger_on_z_movement": false,
    "feature_trigger_on_above_raft": false,
    "feature_trigger_on_first_layer": true,
    "trigger_on_detracted": "",
    "layer_trigger_height": 0.0,
    "cleanup_after_render_complete": true,
    "feature_trigger_on_retract": false,
    "timer_trigger_seconds": 30,
    "position_restrictions": [],
    "trigger_on_retracting_start": "",
    "description": "",
    "feature_trigger_on_wipe": null,
    "trigger_on_extruding_start": "",
    "lift_before_move": true,
    "feature_trigger_on_external_perimeters": false,
    "trigger_on_partially_retracted": "",
    "position_restrictions_enabled": false,
    "feature_trigger_on_small_perimeters": false,
    "feature_trigger_on_perimeters": true
  },
  "xyz_axes_default_mode_options": [
    {
      "name": "Require Explicit G90/G91",
      "value": "require-explicit"
    },
    {
      "name": "Default To Relative",
      "value": "relative"
    },
    {
      "name": "Default To Absolute",
      "value": "absolute"
    }
  ],
  "cancel_print_on_startup_error": true,
  "snapshots": [
    {
      "feature_trigger_on_prime_pillar": true,
      "feature_trigger_on_skirt_brim": false,
      "trigger_on_retracted": "trigger_on",
      "guid": "fe4010ee-98a2-4161-a0cf-6c2a6cb76506",
      "trigger_on_detracting": "forbidden",
      "trigger_type": "layer",
      "feature_trigger_on_infill": true,
      "feature_trigger_on_movement": false,
      "feature_trigger_on_top_solid_infill": true,
      "trigger_on_detracting_start": "forbidden",
      "feature_trigger_on_supports": false,
      "feature_trigger_on_first_layer_travel": false,
      "feature_restrictions_enabled": false,
      "feature_trigger_on_bridges": false,
      "require_zhop": false,
      "feature_trigger_on_solid_infill": true,
      "trigger_on_extruding": "trigger_on",
      "feature_trigger_on_detract": false,
      "retract_before_move": true,
      "feature_trigger_on_gap_fills": true,
      "feature_trigger_on_ooze_shield": false,
      "extruder_state_requirements_enabled": true,
      "cleanup_after_render_fail": false,
      "trigger_on_primed": "trigger_on",
      "name": "Height - 0.2mm - Compatibility",
      "trigger_on_retracting": "",
      "feature_trigger_on_normal_print_speed": false,
      "feature_trigger_on_z_movement": false,
      "feature_trigger_on_above_raft": false,
      "feature_trigger_on_first_layer": true,
      "trigger_on_detracted": "forbidden",
      "layer_trigger_height": 0.2,
      "cleanup_after_render_complete": true,
      "feature_trigger_on_retract": false,
      "timer_trigger_seconds": 30,
      "position_restrictions": [],
      "trigger_on_retracting_start": "",
      "description": "Suitable for prints with variable layer height, or prints with continuous height adjustment (vase mode).",
      "feature_trigger_on_wipe": null,
      "trigger_on_extruding_start": "trigger_on",
      "lift_before_move": true,
      "feature_trigger_on_external_perimeters": false,
      "trigger_on_partially_retracted": "forbidden",
      "position_restrictions_enabled": false,
      "feature_trigger_on_small_perimeters": false,
      "feature_trigger_on_perimeters": true
    },
    {
      "feature_trigger_on_prime_pillar": true,
      "feature_trigger_on_skirt_brim": false,
      "trigger_on_retracted": "trigger_on",
      "guid": "a02bede5-9b86-4cf3-8bdd-f36d36c402a8",
      "trigger_on_detracting": "forbidden",
      "trigger_type": "timer",
      "feature_trigger_on_infill": true,
      "feature_trigger_on_movement": false,
      "feature_trigger_on_top_solid_infill": true,
      "trigger_on_detracting_start": "forbidden",
      "feature_trigger_on_supports": false,
      "feature_trigger_on_first_layer_travel": false,
      "feature_restrictions_enabled": false,
      "feature_trigger_on_bridges": false,
      "require_zhop": false,
      "feature_trigger_on_solid_infill": true,
      "trigger_on_extruding": "trigger_on",
      "feature_trigger_on_detract": false,
      "retract_before_move": true,
      "feature_trigger_on_gap_fills": true,
      "feature_trigger_on_ooze_shield": false,
      "extruder_state_requirements_enabled": true,
      "cleanup_after_render_fail": false,
      "trigger_on_primed": "trigger_on",
      "name": "Every 02:30 - Compatibility",
      "trigger_on_retracting": "",
      "feature_trigger_on_normal_print_speed": false,
      "feature_trigger_on_z_movement": false,
      "feature_trigger_on_above_raft": false,
      "feature_trigger_on_first_layer": true,
      "trigger_on_detracted": "",
      "layer_trigger_height": 0.0,
      "cleanup_after_render_complete": true,
      "feature_trigger_on_retract": false,
      "timer_trigger_seconds": 150,
      "position_restrictions": [],
      "trigger_on_retracting_start": "",
      "description": "Triggers once every 2 minutes and 30 seconds.",
      "feature_trigger_on_wipe": null,
      "trigger_on_extruding_start": "trigger_on",
      "lift_before_move": true,
      "feature_trigger_on_external_perimeters": false,
      "trigger_on_partially_retracted": "forbidden",
      "position_restrictions_enabled": false,
      "feature_trigger_on_small_perimeters": false,
      "feature_trigger_on_perimeters": true
    },
    {
      "feature_trigger_on_prime_pillar": true,
      "feature_trigger_on_skirt_brim": false,
      "trigger_on_retracted": "trigger_on",
      "guid": "e10f3f7e-6343-43af-9689-ffa3403462d6",
      "trigger_on_detracting": "forbidden",
      "trigger_type": "layer",
      "feature_trigger_on_infill": true,
      "feature_trigger_on_movement": false,
      "feature_trigger_on_top_solid_infill": true,
      "trigger_on_detracting_start": "forbidden",
      "feature_trigger_on_supports": false,
      "feature_trigger_on_first_layer_travel": false,
      "feature_restrictions_enabled": true,
      "feature_trigger_on_bridges": false,
      "require_zhop": false,
      "feature_trigger_on_solid_infill": true,
      "trigger_on_extruding": "trigger_on",
      "feature_trigger_on_detract": false,
      "retract_before_move": true,
      "feature_trigger_on_gap_fills": true,
      "feature_trigger_on_ooze_shield": false,
      "extruder_state_requirements_enabled": true,
      "cleanup_after_render_fail": false,
      "trigger_on_primed": "trigger_on",
      "name": "Layer Change - High Quality",
      "trigger_on_retracting": "",
      "feature_trigger_on_normal_print_speed": false,
      "feature_trigger_on_z_movement": false,
      "feature_trigger_on_above_raft": false,
      "feature_trigger_on_first_layer": true,
      "trigger_on_detracted": "forbidden",
      "layer_trigger_height": 0.0,
      "cleanup_after_render_complete": true,
      "feature_trigger_on_retract": false,
      "timer_trigger_seconds": 30,
      "position_restrictions": [],
      "trigger_on_retracting_start": "",
      "description": "Triggers after each layer change, but only on certain features.  WARNING: This trigger requires all of your printer profile speed settings to match your slicer exactly, and for each speed to be unique.  Please see this link for details:  https://github.com/FormerLurker/Octolapse/wiki/Snapshot-Profiles#feature-detection",
      "feature_trigger_on_wipe": null,
      "trigger_on_extruding_start": "trigger_on",
      "lift_before_move": true,
      "feature_trigger_on_external_perimeters": false,
      "trigger_on_partially_retracted": "forbidden",
      "position_restrictions_enabled": false,
      "feature_trigger_on_small_perimeters": false,
      "feature_trigger_on_perimeters": true
    },
    {
      "feature_trigger_on_prime_pillar": true,
      "feature_trigger_on_skirt_brim": false,
      "trigger_on_retracted": "trigger_on",
      "guid": "80c49818-d4ca-455c-a464-18f1f7c8d648",
      "trigger_on_detracting": "forbidden",
      "trigger_type": "layer",
      "feature_trigger_on_infill": true,
      "feature_trigger_on_movement": false,
      "feature_trigger_on_top_solid_infill": true,
      "trigger_on_detracting_start": "forbidden",
      "feature_trigger_on_supports": false,
      "feature_trigger_on_first_layer_travel": false,
      "feature_restrictions_enabled": false,
      "feature_trigger_on_bridges": false,
      "require_zhop": false,
      "feature_trigger_on_solid_infill": true,
      "trigger_on_extruding": "trigger_on",
      "feature_trigger_on_detract": false,
      "retract_before_move": true,
      "feature_trigger_on_gap_fills": true,
      "feature_trigger_on_ooze_shield": false,
      "extruder_state_requirements_enabled": true,
      "cleanup_after_render_fail": false,
      "trigger_on_primed": "trigger_on",
      "name": "Layer Change - Compatibility",
      "trigger_on_retracting": "",
      "feature_trigger_on_normal_print_speed": false,
      "feature_trigger_on_z_movement": false,
      "feature_trigger_on_above_raft": false,
      "feature_trigger_on_first_layer": true,
      "trigger_on_detracted": "forbidden",
      "layer_trigger_height": 0.0,
      "cleanup_after_render_complete": true,
      "feature_trigger_on_retract": false,
      "timer_trigger_seconds": 30,
      "position_restrictions": [],
      "trigger_on_retracting_start": "",
      "description": "Triggers after each layer change.",
      "feature_trigger_on_wipe": null,
      "trigger_on_extruding_start": "trigger_on",
      "lift_before_move": true,
      "feature_trigger_on_external_perimeters": false,
      "trigger_on_partially_retracted": "forbidden",
      "position_restrictions_enabled": false,
      "feature_trigger_on_small_perimeters": false,
      "feature_trigger_on_perimeters": true
    },
    {
      "feature_trigger_on_prime_pillar": true,
      "feature_trigger_on_skirt_brim": false,
      "trigger_on_retracted": "",
      "guid": "a37d9d58-b630-48fc-985c-e0e43cd046dc",
      "trigger_on_detracting": "",
      "trigger_type": "gcode",
      "feature_trigger_on_infill": true,
      "feature_trigger_on_movement": false,
      "feature_trigger_on_top_solid_infill": true,
      "trigger_on_detracting_start": "",
      "feature_trigger_on_supports": false,
      "feature_trigger_on_first_layer_travel": false,
      "feature_restrictions_enabled": false,
      "feature_trigger_on_bridges": false,
      "require_zhop": false,
      "feature_trigger_on_solid_infill": true,
      "trigger_on_extruding": "",
      "feature_trigger_on_detract": false,
      "retract_before_move": true,
      "feature_trigger_on_gap_fills": true,
      "feature_trigger_on_ooze_shield": false,
      "extruder_state_requirements_enabled": false,
      "cleanup_after_render_fail": false,
      "trigger_on_primed": "",
      "name": "Gcode",
      "trigger_on_retracting": "",
      "feature_trigger_on_normal_print_speed": false,
      "feature_trigger_on_z_movement": false,
      "feature_trigger_on_above_raft": false,
      "feature_trigger_on_first_layer": true,
      "trigger_on_detracted": "",
      "layer_trigger_height": 0.0,
      "cleanup_after_render_complete": true,
      "feature_trigger_on_retract": false,
      "timer_trigger_seconds": 30,
      "position_restrictions": [],
      "trigger_on_retracting_start": "",
      "description": "Trigger when the snapshot gcode is detected.",
      "feature_trigger_on_wipe": null,
      "trigger_on_extruding_start": "",
      "lift_before_move": true,
      "feature_trigger_on_external_perimeters": false,
      "trigger_on_partially_retracted": "",
      "position_restrictions_enabled": false,
      "feature_trigger_on_small_perimeters": false,
      "feature_trigger_on_perimeters": true
    },
    {
      "feature_trigger_on_prime_pillar": true,
      "feature_trigger_on_skirt_brim": false,
      "trigger_on_retracted": "trigger_on",
      "guid": "b3fabee8-49f4-43ee-81b3-28437028c1c8",
      "trigger_on_detracting": "forbidden",
      "trigger_type": "layer",
      "feature_trigger_on_infill": true,
      "feature_trigger_on_movement": false,
      "feature_trigger_on_top_solid_infill": true,
      "trigger_on_detracting_start": "forbidden",
      "feature_trigger_on_supports": false,
      "feature_trigger_on_first_layer_travel": false,
      "feature_restrictions_enabled": false,
      "feature_trigger_on_bridges": false,
      "require_zhop": false,
      "feature_trigger_on_solid_infill": true,
      "trigger_on_extruding": "trigger_on",
      "feature_trigger_on_detract": false,
      "retract_before_move": true,
      "feature_trigger_on_gap_fills": true,
      "feature_trigger_on_ooze_shield": false,
      "extruder_state_requirements_enabled": true,
      "cleanup_after_render_fail": false,
      "trigger_on_primed": "trigger_on",
      "name": "Height - 0.4mm - Compatibility",
      "trigger_on_retracting": "",
      "feature_trigger_on_normal_print_speed": false,
      "feature_trigger_on_z_movement": false,
      "feature_trigger_on_above_raft": false,
      "feature_trigger_on_first_layer": true,
      "trigger_on_detracted": "forbidden",
      "layer_trigger_height": 0.4,
      "cleanup_after_render_complete": true,
      "feature_trigger_on_retract": false,
      "timer_trigger_seconds": 30,
      "position_restrictions": [],
      "trigger_on_retracting_start": "",
      "description": "Suitable for prints with variable layer height, or prints with continuous height adjustment (vase mode).",
      "feature_trigger_on_wipe": null,
      "trigger_on_extruding_start": "trigger_on",
      "lift_before_move": true,
      "feature_trigger_on_external_perimeters": false,
      "trigger_on_partially_retracted": "forbidden",
      "position_restrictions_enabled": false,
      "feature_trigger_on_small_perimeters": false,
      "feature_trigger_on_perimeters": true
    },
    {
      "feature_trigger_on_prime_pillar": true,
      "feature_trigger_on_skirt_brim": false,
      "trigger_on_retracted": "trigger_on",
      "guid": "e85f374f-94cd-4c64-aaed-c5960be09ae8",
      "trigger_on_detracting": "forbidden",
      "trigger_type": "timer",
      "feature_trigger_on_infill": true,
      "feature_trigger_on_movement": false,
      "feature_trigger_on_top_solid_infill": true,
      "trigger_on_detracting_start": "forbidden",
      "feature_trigger_on_supports": false,
      "feature_trigger_on_first_layer_travel": false,
      "feature_restrictions_enabled": false,
      "feature_trigger_on_bridges": false,
      "require_zhop": false,
      "feature_trigger_on_solid_infill": true,
      "trigger_on_extruding": "trigger_on",
      "feature_trigger_on_detract": false,
      "retract_before_move": true,
      "feature_trigger_on_gap_fills": true,
      "feature_trigger_on_ooze_shield": false,
      "extruder_state_requirements_enabled": true,
      "cleanup_after_render_fail": false,
      "trigger_on_primed": "trigger_on",
      "name": "Every 05:00 - Compatibility",
      "trigger_on_retracting": "",
      "feature_trigger_on_normal_print_speed": false,
      "feature_trigger_on_z_movement": false,
      "feature_trigger_on_above_raft": false,
      "feature_trigger_on_first_layer": true,
      "trigger_on_detracted": "",
      "layer_trigger_height": 0.0,
      "cleanup_after_render_complete": true,
      "feature_trigger_on_retract": false,
      "timer_trigger_seconds": 300,
      "position_restrictions": [],
      "trigger_on_retracting_start": "",
      "description": "Triggers once every 5 minutes.",
      "feature_trigger_on_wipe": null,
      "trigger_on_extruding_start": "trigger_on",
      "lift_before_move": true,
      "feature_trigger_on_external_perimeters": false,
      "trigger_on_partially_retracted": "forbidden",
      "position_restrictions_enabled": false,
      "feature_trigger_on_small_perimeters": false,
      "feature_trigger_on_perimeters": true
    }
  ],
  "g90_influences_extruder_options": [
    {
      "name": "Use Octoprint Settings",
      "value": "use-octoprint-settings"
    },
    {
      "name": "True",
      "value": "true"
    },
    {
      "name": "False",
      "value": "false"
    }
  ],
  "current_snapshot_profile_guid": "80c49818-d4ca-455c-a464-18f1f7c8d648",
  "e_axis_default_mode_options": [
    {
      "name": "Require Explicit M82/M83",
      "value": "require-explicit"
    },
    {
      "name": "Default To Relative",
      "value": "relative"
    },
    {
      "name": "Default To Absolute",
      "value": "absolute"
    }
  ],
  "units_default_options": [
    {
      "name": "Require Explicit G21",
      "value": "require-explicit"
    },
    {
      "name": "Inches",
      "value": "inches"
    },
    {
      "name": "Millimeters",
      "value": "millimeters"
    }
  ],
  "cameras": [
    {
      "on_after_render_script": "",
      "exposure_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094850&group=1&value={value}",
      "sharpness": 128,
      "focus": 28,
      "backlight_compensation_enabled": false,
      "guid": "354def78-9eea-409a-ad23-ee966dfff4ba",
      "saturation_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963778&group=1&value={value}",
      "on_before_snapshot_script": "",
      "timeout_ms": 5000,
      "led1_mode": "auto",
      "autofocus_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094860&group=1&value={value}",
      "led1_mode_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=168062213&group=1&value={value}",
      "exposure_auto_priority_enabled": true,
      "username": "",
      "saturation": 128,
      "autofocus_enabled": true,
      "external_camera_snapshot_script": "",
      "sharpness_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963803&group=1&value={value}",
      "on_before_render_script": "",
      "gain": 100,
      "password": "",
      "name": "Default Webcam",
      "brightness": 128,
      "pan_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094856&group=1&value={value}",
      "enabled": true,
      "zoom": 100,
      "contrast": 128,
      "contrast_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963777&group=1&value={value}",
      "white_balance_temperature": 4000,
      "jpeg_quality_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=1&group=3&value={value}",
      "brightness_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963776&group=1&value={value}",
      "snapshot_request_template": "{camera_address}?action=snapshot",
      "white_balance_temperature_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963802&group=1&value={value}",
      "ignore_ssl_error": false,
      "tilt": 0,
      "exposure_type_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094849&group=1&value={value}",
      "delay": 125,
      "exposure_auto_priority_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094851&group=1&value={value}",
      "camera_type": "webcam",
      "zoom_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094861&group=1&value={value}",
      "exposure_type": 1,
      "pan": 0,
      "led1_frequency_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=168062214&group=1&value={value}",
      "apply_settings_before_print": false,
      "description": "Basically the same settings as the Logitech profile currently.  I will update the defaults if/when more cameras are tested and verified, especially regarding the request templates.",
      "white_balance_auto": true,
      "white_balance_auto_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963788&group=1&value={value}",
      "led1_frequency": 0,
      "backlight_compensation_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963804&group=1&value={value}",
      "gain_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963795&group=1&value={value}",
      "snapshot_transpose": "",
      "powerline_frequency_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963800&group=1&value={value}",
      "focus_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094858&group=1&value={value}",
      "address": "http://127.0.0.1:8080/",
      "tilt_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094857&group=1&value={value}",
      "exposure": 250,
      "gcode_camera_script": "",
      "jpeg_quality": 90,
      "powerline_frequency": 60,
      "on_print_start_script": "",
      "on_after_snapshot_script": ""
    }
  ],
  "version": "0.3.4",
  "show_real_snapshot_time": true,
  "position_restriction_types": [
    {
      "name": "Must be inside",
      "value": "required"
    },
    {
      "name": "Cannot be inside",
      "value": "forbidden"
    }
  ],
  "rendering_output_format_options": [
    {
      "name": "AVI",
      "value": "avi"
    },
    {
      "name": "FLV",
      "value": "flv"
    },
    {
      "name": "GIF",
      "value": "gif"
    },
    {
      "name": "H.264/MPEG-4 AVC",
      "value": "h264"
    },
    {
      "name": "MP4 (libxvid)",
      "value": "mp4"
    },
    {
      "name": "MPEG",
      "value": "mpeg"
    },
    {
      "name": "VOB",
      "value": "vob"
    }
  ],
  "show_navbar_icon": true,
  "show_navbar_when_not_printing": true,
  "is_octolapse_enabled": true,
  "show_trigger_state_changes": true,
  "default_debug_profile": {
    "gcode_queuing_all": false,
    "extruder_change": false,
    "position_change": false,
    "description": "",
    "trigger_height_change": false,
    "render_fail": false,
    "log_to_console": false,
    "is_test_mode": false,
    "render_sync": false,
    "snapshot_gcode_endcommand": false,
    "render_complete": false,
    "trigger_triggering": false,
    "snapshot_position": false,
    "snapshot_position_resume_print": false,
    "gcode_received_all": false,
    "print_state_changed": false,
    "guid": "08ad284a-76cc-4854-b8a0-f2658b784dd7",
    "trigger_layer_change": false,
    "trigger_create": false,
    "snapshot_download": false,
    "trigger_triggering_state": false,
    "snapshot_clean": false,
    "snapshot_position_return": false,
    "camera_settings_apply": false,
    "name": "Default Debug",
    "snapshot_save": false,
    "settings_save": false,
    "enabled": false,
    "settings_load": false,
    "extruder_triggered": false,
    "trigger_zhop": false,
    "trigger_wait_state": false,
    "trigger_time_unpaused": false,
    "trigger_time_remaining": false,
    "gcode_sent_all": false,
    "snapshot_gcode": false,
    "render_start": false,
    "position_command_received": false
  },
  "current_stabilization_profile_guid": "93036d8c-de74-4fc9-96aa-d9bb410df9b0",
  "snapshot_transpose_options": [
    {
      "name": "None",
      "value": ""
    },
    {
      "name": "Flip Left and Right",
      "value": "flip_left_right"
    },
    {
      "name": "Flip Top and Bottom",
      "value": "flip_top_bottom"
    },
    {
      "name": "Rotate 90 Degrees",
      "value": "rotate_90"
    },
    {
      "name": "Rotate 180 Degrees",
      "value": "rotate_180"
    },
    {
      "name": "Rotate 270 Degrees",
      "value": "rotate_270"
    },
    {
      "name": "Transpose",
      "value": "transpose"
    }
  ],
  "current_camera_profile_guid": "6b3361a7-82b7-4abf-b3d1-e3046d457d8c",
  "camera_led_1_mode_options": [
    {
      "name": "On",
      "value": "on"
    },
    {
      "name": "Off",
      "value": "off"
    },
    {
      "name": "Blink",
      "value": "blink"
    },
    {
      "name": "Auto",
      "value": "auto"
    }
  ],
  "camera_powerline_frequency_options": [
    {
      "name": "50 HZ (Europe, China, India, etc)",
      "value": "50"
    },
    {
      "name": "60 HZ (North/South America, Japan, etc)",
      "value": "60"
    }
  ],
  "show_position_changes": true,
  "current_debug_profile_guid": "68d000d6-0ae3-40f4-9b16-bdcb882604a6"
}