sudo smartctl -x /dev/sda7
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.16-1-MANJARO] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 3.5
Device Model:     ST1000DM010-2EP102
Serial Number:    Z9AJY1TH
LU WWN Device Id: 5 000c50 0a4c72b49
Firmware Version: CC43
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Jan 22 20:26:35 2019 +03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 108) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x1085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   075   063   006    -    39605470
  3 Spin_Up_Time            PO----   099   097   000    -    0
  4 Start_Stop_Count        -O--CK   099   099   020    -    1173
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  7 Seek_Error_Rate         POSR--   073   060   045    -    24692537
  9 Power_On_Hours          -O--CK   099   099   000    -    1532
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   099   099   020    -    1144
183 Runtime_Bad_Block       -O--CK   097   097   000    -    3
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
188 Command_Timeout         -O--CK   100   099   000    -    0 0 3
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   074   060   040    -    26 (Min/Max 19/29)
193 Load_Cycle_Count        -O--CK   100   100   000    -    1174
194 Temperature_Celsius     -O---K   026   017   000    -    26 (0 17 0 0 0)
195 Hardware_ECC_Recovered  -O-RC-   006   001   000    -    39605470
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Offline_Uncorrectable   ----C-   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    10
240 Head_Flying_Hours       ------   100   253   000    -    1522h+57m+15.958s
241 Total_LBAs_Written      ------   100   253   000    -    3622557383
242 Total_LBAs_Read         ------   100   253   000    -    1833008873
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x24       GPL     R/O    512  Current Device Internal Status Data log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    4120  Device vendor specific log
0xa8       GPL,SL  VS     129  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    4800  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL,SL  VS      10  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       898         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
Device State:                        Active (0)
Current Temperature:                    27 Celsius
Power Cycle Min/Max Temperature:     19/29 Celsius
Lifetime    Min/Max Temperature:     17/40 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Data Table command not supported

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4            1144  ---  Lifetime Power-On Resets
0x01  0x010  4            1532  ---  Power-on Hours
0x01  0x018  6      3632785815  ---  Logical Sectors Written
0x01  0x020  6        32034783  ---  Number of Write Commands
0x01  0x028  6      1835568339  ---  Logical Sectors Read
0x01  0x030  6        24860442  ---  Number of Read Commands
0x01  0x038  6               -  ---  Date and Time TimeStamp
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4             628  ---  Spindle Motor Power-on Hours
0x03  0x010  4             628  ---  Head Flying Hours
0x03  0x018  4            1174  ---  Head Load Events
0x03  0x020  4               0  ---  Number of Reallocated Logical Sectors
0x03  0x028  4               0  ---  Read Recovery Attempts
0x03  0x030  4               0  ---  Number of Mechanical Start Failures
0x03  0x038  4               0  ---  Number of Realloc. Candidate Logical Sectors
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4               3  ---  Resets Between Cmd Acceptance and Completion
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              27  ---  Current Temperature
0x05  0x010  1              27  ---  Average Short Term Temperature
0x05  0x018  1              27  ---  Average Long Term Temperature
0x05  0x020  1              40  ---  Highest Temperature
0x05  0x028  1              22  ---  Lowest Temperature
0x05  0x030  1              37  ---  Highest Average Short Term Temperature
0x05  0x038  1              26  ---  Lowest Average Short Term Temperature
0x05  0x040  1              35  ---  Highest Average Long Term Temperature
0x05  0x048  1              27  ---  Lowest Average Long Term Temperature
0x05  0x050  4               0  ---  Time in Over-Temperature
0x05  0x058  1              55  ---  Specified Maximum Operating Temperature
0x05  0x060  4               0  ---  Time in Under-Temperature
0x05  0x068  1              13  ---  Specified Minimum Operating Temperature
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            3  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS

---------------------------------------------------------------------------------

dmesg -l err,Warn
[    0.276882] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.276883] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.694549] blkcg_policy_register: BLKCG_MAX_POLS too small
[    3.414129] ata6.00: exception Emask 0x10 SAct 0x8000 SErr 0x4890000 action 0xe frozen
[    3.414174] ata6.00: irq_stat 0x08400040, interface fatal error, connection status changed
[    3.414229] ata6: SError: { PHYRdyChg 10B8B LinkSeq DevExch }
[    3.414265] ata6.00: failed command: READ FPDMA QUEUED
[    3.414302] ata6.00: cmd 60/f8:78:08:02:00/01:00:00:00:00/40 tag 15 ncq dma 258048 in
                        res 40/00:7c:08:02:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[    3.414398] ata6.00: status: { DRDY }
[    9.564665] ata6: link is slow to respond, please be patient (ready=0)
[   13.417998] ata6: COMRESET failed (errno=-16)
[   14.182817] print_req_error: I/O error, dev sdb, sector 520
[   14.268034] ata6.00: exception Emask 0x10 SAct 0x8 SErr 0x4090000 action 0xe frozen
[   14.268083] ata6.00: irq_stat 0x00400040, connection status changed
[   14.268121] ata6: SError: { PHYRdyChg 10B8B DevExch }
[   14.268152] ata6.00: failed command: READ FPDMA QUEUED
[   14.268189] ata6.00: cmd 60/08:18:08:02:00/00:00:00:00:00/40 tag 3 ncq dma 4096 in
                        res 40/00:1c:08:02:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   14.268274] ata6.00: status: { DRDY }
[   20.414707] ata6.00: exception Emask 0x10 SAct 0x100000 SErr 0x4090000 action 0xe frozen
[   20.414766] ata6.00: irq_stat 0x00400040, connection status changed
[   20.414801] ata6: SError: { PHYRdyChg 10B8B DevExch }
[   20.414831] ata6.00: failed command: READ FPDMA QUEUED
[   20.414866] ata6.00: cmd 60/08:a0:08:02:00/00:00:00:00:00/40 tag 20 ncq dma 4096 in
                        res 40/00:a4:08:02:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   20.414945] ata6.00: status: { DRDY }
[   26.564663] ata6: link is slow to respond, please be patient (ready=0)
[   30.417996] ata6: COMRESET failed (errno=-16)
[   37.129969] vfs_monitor: loading out-of-tree module taints kernel.
[   37.880358] systemd-journald[246]: File /var/log/journal/ab0f6cd323f347768fb1659f796a628c/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   38.354172] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  415.27  Thu Dec 20 17:25:03 CST 2018 (using threaded interrupts)
[   38.805241] nvidia_modeset: module license 'NVIDIA' taints kernel.
[   38.805243] Disabling lock debugging due to kernel taint
[   40.104378] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180810/utaddress-213)
[   40.104388] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[   40.104393] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[   40.104398] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213)
[   40.104402] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   40.358447] r8168 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   40.381384] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com>
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[   42.193429] kauditd_printk_skb: 3 callbacks suppressed
[   45.959597] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[   45.959602] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[   45.959605] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[   47.222325] kauditd_printk_skb: 11 callbacks suppressed
[   49.448979] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[   49.449144] caller _nv001094rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
[   52.288689] systemd-journald[246]: File /var/log/journal/ab0f6cd323f347768fb1659f796a628c/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   77.177084] EXT4-fs (sda6): warning: mounting fs with errors, running e2fsck is recommended
[ 3433.309646] ata6.00: exception Emask 0x10 SAct 0x3000000 SErr 0x4090000 action 0xe frozen
[ 3433.309652] ata6.00: irq_stat 0x00400040, connection status changed
[ 3433.309657] ata6: SError: { PHYRdyChg 10B8B DevExch }
[ 3433.309661] ata6.00: failed command: READ FPDMA QUEUED
[ 3433.309670] ata6.00: cmd 60/90:c0:d0:13:24/00:00:3a:00:00/40 tag 24 ncq dma 73728 in
                        res 40/00:c4:d0:13:24/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
[ 3433.309674] ata6.00: status: { DRDY }
[ 3433.309677] ata6.00: failed command: READ FPDMA QUEUED
[ 3433.309685] ata6.00: cmd 60/08:c8:70:e4:6d/00:00:59:00:00/40 tag 25 ncq dma 4096 in
                        res 40/00:c4:d0:13:24/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
[ 3433.309689] ata6.00: status: { DRDY }
[ 3439.430127] ata6: link is slow to respond, please be patient (ready=0)
[ 3441.957004] print_req_error: I/O error, dev sdb, sector 975442896
[ 3441.957042] print_req_error: I/O error, dev sdb, sector 1500374128
[ 5382.682882] ata6.00: exception Emask 0x10 SAct 0x8000 SErr 0x4890000 action 0xe frozen
[ 5382.682898] ata6.00: irq_stat 0x08400040, interface fatal error, connection status changed
[ 5382.682904] ata6: SError: { PHYRdyChg 10B8B LinkSeq DevExch }
[ 5382.682908] ata6.00: failed command: READ FPDMA QUEUED
[ 5382.682916] ata6.00: cmd 60/00:78:f8:b7:3d/01:00:41:00:00/40 tag 15 ncq dma 131072 in
                        res 40/00:7c:f8:b7:3d/00:00:41:00:00/40 Emask 0x10 (ATA bus error)
[ 5382.682920] ata6.00: status: { DRDY }
[ 5387.610254] print_req_error: I/O error, dev sdb, sector 1094563832
[ 9601.512566]  in libxul.so[7f37c0f2f000+4947000]
[ 9615.365218] kauditd_printk_skb: 9 callbacks suppressed
[19283.359845] ata6: link is slow to respond, please be patient (ready=0)
[19882.257143] ata6: link is slow to respond, please be patient (ready=0)
[19886.977096] ata6: COMRESET failed (errno=-16)
[19892.293650] ata6: link is slow to respond, please be patient (ready=0)
[19905.650109] ata6: link is slow to respond, please be patient (ready=0)
[19910.363362] ata6: COMRESET failed (errno=-16)
[19915.683306] ata6: link is slow to respond, please be patient (ready=0)
[19920.403219] ata6: COMRESET failed (errno=-16)
[20491.610810] ata6: link is slow to respond, please be patient (ready=0)
[20496.337393] ata6: COMRESET failed (errno=-16)
[20501.663986] ata6: link is slow to respond, please be patient (ready=0)
[20506.383888] ata6: COMRESET failed (errno=-16)
[20511.713828] ata6: link is slow to respond, please be patient (ready=0)
[21682.433088] ata6: link is slow to respond, please be patient (ready=0)
[22282.216376] ata6: link is slow to respond, please be patient (ready=0)
[22295.232834] ata6: link is slow to respond, please be patient (ready=0)
[22893.546829] ata6: link is slow to respond, please be patient (ready=0)
[23492.697471] ata6: link is slow to respond, please be patient (ready=0)
[24692.134741] ata6: link is slow to respond, please be patient (ready=0)
[24696.861334] ata6: COMRESET failed (errno=-16)
[25282.371636] ata6: link is slow to respond, please be patient (ready=0)
[25287.048248] ata6: COMRESET failed (errno=-16)
[25292.381492] ata6: link is slow to respond, please be patient (ready=0)
[25308.467876] ata6: link is slow to respond, please be patient (ready=0)
[25313.151147] ata6: COMRESET failed (errno=-16)
[25318.474396] ata6: link is slow to respond, please be patient (ready=0)
[25323.160959] ata6: COMRESET failed (errno=-16)
[25892.171663] ata6: link is slow to respond, please be patient (ready=0)
[25896.894898] ata6: COMRESET failed (errno=-16)
[26489.731860] ata6: link is slow to respond, please be patient (ready=0)
[26494.408454] ata6: COMRESET failed (errno=-16)
[26499.735035] ata6: link is slow to respond, please be patient (ready=0)
[26504.411632] ata6: COMRESET failed (errno=-16)
[27090.462617] ata6: link is slow to respond, please be patient (ready=0)
[27095.185883] ata6: COMRESET failed (errno=-16)
[27100.535789] ata6: link is slow to respond, please be patient (ready=0)