API tools faq
paste
Advertisement
Guest User

nzbget.conf

a guest
Aug 7th, 2016
416
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 83.63 KB | None | 0 0
raw download clone embed print report
  1. # Configuration file for NZBGet
  2. #
  3. # On POSIX put this file to one of the following locations:
  4. # ~/.nzbget
  5. # /etc/nzbget.conf
  6. # /usr/etc/nzbget.conf
  7. # /usr/local/etc/nzbget.conf
  8. # /opt/etc/nzbget.conf
  9. #
  10. # On Windows put this file in program's directory.
  11. #
  12. # You can also put the file into any location, if you specify the path to it
  13. # using switch "-c", e.g:
  14. # nzbget -c /home/user/myconfig.txt
  15.  
  16. # For quick start change the option MainDir and configure one news-server
  17.  
  18.  
  19. ##############################################################################
  20. ### PATHS ###
  21.  
  22. # Root directory for all tasks.
  23. #
  24. # On POSIX you can use "~" as alias for home directory (e.g. "~/downloads").
  25. # On Windows use absolute paths (e.g. "C:\Downloads").
  26. MainDir=~/NZBGet
  27.  
  28. # Destination directory for downloaded files.
  29. #
  30. # If you want to distinguish between partially downloaded files and
  31. # completed downloads, use also option <InterDir>.
  32. DestDir=~/Downloads
  33.  
  34. # Directory to store intermediate files.
  35. #
  36. # If this option is set (not empty) the files are downloaded into
  37. # this directory first. After successful download of nzb-file (possibly
  38. # after par-repair) the files are moved to destination directory
  39. # (option <DestDir>). If download or unpack fail the files remain in
  40. # intermediate directory.
  41. #
  42. # Using of intermediate directory can significantly improve unpack
  43. # performance if you can put intermediate directory (option <InterDir>)
  44. # and destination directory (option <DestDir>) on separate physical
  45. # hard drives.
  46. #
  47. # NOTE: If the option <InterDir> is set to empty value the downloaded
  48. # files are put directly to destination directory (option <DestDir>).
  49. InterDir=${MainDir}/Intermediate
  50.  
  51. # Directory for incoming nzb-files.
  52. #
  53. # If a new nzb-file is added to queue via web-interface or RPC-API, it
  54. # is saved into this directory and then processed by pre-processing
  55. # script (option <ScanScript>).
  56. #
  57. # This directory is also monitored for new nzb-files. If a new file
  58. # is found it is added to download queue. The directory can have
  59. # sub-directories. A nzb-file queued from a subdirectory is automatically
  60. # assigned to category with sub-directory-name.
  61. NzbDir=~/Downloads
  62.  
  63. # Directory to store program state.
  64. #
  65. # This directory is used to save download queue, history, information
  66. # about fetched RSS feeds, statistics, etc.
  67. QueueDir=${MainDir}/queue
  68.  
  69. # Directory to store temporary files.
  70. TempDir=${MainDir}/tmp
  71.  
  72. # Directory with web-interface files.
  73. #
  74. # Example: /usr/local/share/nzbget/webui.
  75. #
  76. # NOTE: To disable web-interface set the option to an empty value.
  77. # This however doesn't disable the built-in web-server completely because
  78. # it is also used to serve JSON-/XML-RPC requests.
  79. # NOTE: option WebDir cannot be changed because it is hardcoded in OSX version.
  80.  
  81. # Directory with post-processing and other scripts.
  82. #
  83. # NOTE: For information on writing scripts visit http://nzbget.net/Extension_scripts.
  84. ScriptDir=${MainDir}/scripts
  85.  
  86. # Lock-file for daemon-mode, POSIX only.
  87. #
  88. # If the option is not empty, NZBGet creates the file and writes process-id
  89. # (PID) into it. That info can be used in shell scripts.
  90. # NOTE: option LockFile cannot be changed because it is hardcoded in OSX version.
  91.  
  92. # Where to store log file, if it needs to be created.
  93. #
  94. # NOTE: See also option <WriteLog>.
  95. LogFile=~/Library/Logs/NZBGet.log
  96.  
  97. # Configuration file template.
  98. #
  99. # Put the path to the example configuration file which comes with
  100. # NZBGet. Web-interface needs this file to read option descriptions.
  101. #
  102. # Do not put here your actual configuration file (typically stored
  103. # in your home directory or in /etc/nzbget.conf) but instead the unchanged
  104. # example configuration file (installed to
  105. # /usr/local/share/nzbget/nzbget.conf).
  106. #
  107. # Example: /usr/local/share/nzbget/nzbget.conf.
  108. # NOTE: option ConfigTemplate cannot be changed because it is hardcoded in OSX version.
  109.  
  110.  
  111. ##############################################################################
  112. ### NEWS-SERVERS ###
  113.  
  114. # This section defines which servers NZBGet should connect to.
  115. #
  116. # The servers should be numbered subsequently without holes.
  117. # For example if you configure three servers you should name them as Server1,
  118. # Server2 and Server3. If you need to delete Server2 later you should also
  119. # change the name of Server3 to Server2. Otherwise it will not be properly
  120. # read from the config file. Server number doesn't affect its priority (level).
  121.  
  122. # Use this news server (yes, no).
  123. #
  124. # Set to "no" to temporary disable the server.
  125. Server1.Active=yes
  126.  
  127. # Name of news server.
  128. #
  129. # The name is used in UI and for logging. It can be any string, you
  130. # may even leave it empty.
  131. Server1.Name=xxxxxx
  132.  
  133. # Level (priority) of news server (0-99).
  134. #
  135. # The servers are ordered by their level. NZBGet first tries to download
  136. # an article from one (any) of level-0-servers. If that server fails,
  137. # NZBGet tries all other level-0-servers. If all servers fail, it proceeds
  138. # with the level-1-servers, etc.
  139. #
  140. # Put your major download servers at level 0 and your fill servers at
  141. # levels 1, 2, etc..
  142. #
  143. # Several servers with the same level may be defined, they have
  144. # the same priority.
  145. Server1.Level=0
  146.  
  147. # Group of news server (0-99).
  148. #
  149. # If you have multiple accounts with same conditions (retention, etc.)
  150. # on the same news server, set the same group (greater than 0) for all
  151. # of them. If download fails on one news server, NZBGet does not try
  152. # other servers from the same group.
  153. #
  154. # Value "0" means no group defined (default).
  155. Server1.Group=0
  156.  
  157. # Host name of news server.
  158. Server1.Host=xxxx
  159.  
  160. # Port to connect to (1-65535).
  161. Server1.Port=563
  162.  
  163. # User name to use for authentication.
  164. Server1.Username=xxxx
  165.  
  166. # Password to use for authentication.
  167. Server1.Password==xxxx
  168.  
  169. # Server requires "Join Group"-command (yes, no).
  170. Server1.JoinGroup=no
  171.  
  172. # Encrypted server connection (TLS/SSL) (yes, no).
  173. #
  174. # NOTE: By changing this option you should also change the option <ServerX.Port>
  175. # accordingly because unsecure and encrypted connections use different ports.
  176. Server1.Encryption=yes
  177.  
  178. # Cipher to use for encrypted server connection.
  179. #
  180. # By default (when the option is empty) the underlying encryption library
  181. # chooses the cipher automatically. To achieve the best performance
  182. # however you can manually select a faster cipher.
  183. #
  184. # See http://nzbget.net/Choosing_a_cipher for details.
  185. #
  186. # NOTE: One of the fastest cipher is RC4, it also provides strong 128 bit
  187. # encryption. To select it use the cipher string "RC4-MD5" (if NZBGet was
  188. # configured to use OpenSSL) or "NONE:+VERS-TLS-ALL:+ARCFOUR-128:+RSA:+MD5:+COMP-ALL"
  189. # (if NZBGet was configured to use GnuTLS).
  190. #
  191. # NOTE: You may get a TLS handshake error if the news server does
  192. # not support the chosen cipher. You can also get an error "Could not
  193. # select cipher for TLS" if the cipher string is not valid.
  194. Server1.Cipher=
  195.  
  196. # Maximum number of simultaneous connections to this server (0-999).
  197. Server1.Connections=10
  198.  
  199. # Second server, on level 0.
  200.  
  201. #Server2.Level=0
  202. #Server2.Host=xxxx
  203. #Server2.Port=119
  204. #Server2.Username=me
  205. #Server2.Password=mypass
  206. #Server2.JoinGroup=yes
  207. #Server2.Connections=4
  208.  
  209. # Third server, on level 1.
  210.  
  211. #Server3.Level=1
  212. #Server3.Host=fills.newsserver.com
  213. #Server3.Port=119
  214. #Server3.Username=me2
  215. #Server3.Password=mypass2
  216. #Server3.JoinGroup=yes
  217. #Server3.Connections=1
  218.  
  219.  
  220. ##############################################################################
  221. ### SECURITY ###
  222.  
  223. # IP on which NZBGet server listen and which clients use to contact NZBGet.
  224. #
  225. # It could be a dns-hostname (e. g. "mypc") or an ip-address (e. g. "192.168.1.2" or
  226. # "127.0.0.1"). An IP-address is more effective because does not require dns-lookup.
  227. #
  228. # Your computer may have multiple network interfaces and therefore multiple IP
  229. # addresses. If you want NZBGet to listen to all interfaces and be available from
  230. # all IP-addresses use value "0.0.0.0".
  231. #
  232. # NOTE: When you start NZBGet as client (to send remote commands to NZBGet server) and
  233. # the option <ControlIP> is set to "0.0.0.0" the client will use IP "127.0.0.1".
  234. #
  235. # NOTE: If you set the option to "127.0.0.1" you will be able to connect to NZBGet
  236. # only from the computer running NZBGet. This restriction applies to web-interface too.
  237. ControlIP=0.0.0.0
  238.  
  239. # Port which NZBGet server and remote client use (1-65535).
  240. #
  241. # NOTE: The communication via this port is not encrypted. For encrypted
  242. # communication see option <SecurePort>.
  243. ControlPort=6789
  244.  
  245. # User name which NZBGet server and remote client use.
  246. #
  247. # Set to empty value to disable user name check (check only password).
  248. #
  249. # NOTE: This option was added in NZBGet 11. Older versions used predefined
  250. # not changeable user name "nzbget". Third-party tools or web-sites written
  251. # for older NZBGet versions may not have an option to define user name. In
  252. # this case you should set option <ControlUsername> to the default value
  253. # "nzbget" or use empty value.
  254. ControlUsername=nzbget
  255.  
  256. # Password which NZBGet server and remote client use.
  257. #
  258. # Set to empty value to disable authorization request.
  259. ControlPassword=xxxx
  260.  
  261. # Secure control of NZBGet server (yes, no).
  262. #
  263. # Activate the option if you want to access NZBGet built-in web-server
  264. # via HTTPS (web-interface and RPC). You should also provide certificate
  265. # and key files, see option <SecureCert> and option <SecureKey>.
  266. SecureControl=no
  267.  
  268. # Port which NZBGet server and remote client use for encrypted
  269. # communication (1-65535).
  270. SecurePort=xxxx
  271.  
  272. # Full path to certificate file for encrypted communication.
  273. SecureCert=
  274.  
  275. # Full path to key file for encrypted communication.
  276. SecureKey=
  277.  
  278. # IP-addresses allowed to connect without authorization.
  279. #
  280. # Comma separated list of privileged IPs for easy access to NZBGet
  281. # built-in web-server (web-interface and RPC).
  282. #
  283. # Example: 127.0.0.1,192.168.178.2.
  284. #
  285. # NOTE: Do not use this option if the program works behind another
  286. # web-server because all requests will have the address of this server.
  287. AuthorizedIP=127.0.0.1
  288.  
  289. # User name for daemon-mode, POSIX only.
  290. #
  291. # Set the user that the daemon normally runs at (POSIX in daemon-mode only).
  292. # Set MainDir with an absolute path to be sure where it will write.
  293. # This allows NZBGet daemon to be launched in rc.local (at boot), and
  294. # download items as a specific user id.
  295. #
  296. # NOTE: This option has effect only if the program was started from
  297. # root-account, otherwise it is ignored and the daemon runs under
  298. # current user id.
  299. # NOTE: option DaemonUsername cannot be changed because it is hardcoded in OSX version.
  300.  
  301. # Specify default umask (affects file permissions) for newly created
  302. # files, POSIX only (000-1000).
  303. #
  304. # The value should be written in octal form (the same as for "umask" shell
  305. # command).
  306. # Empty value or value "1000" disable the setting of umask-mode; current
  307. # umask-mode (set via shell) is used in this case.
  308. UMask=1000
  309.  
  310.  
  311. ##############################################################################
  312. ### CATEGORIES ###
  313.  
  314. # This section defines categories available in web-interface.
  315.  
  316. # Category name.
  317. #
  318. # Each nzb-file can be assigned to a category.
  319. # Category name is passed to post-processing script and can be used by it
  320. # to perform category specific processing.
  321. Category1.Name=Movies
  322.  
  323. # Destination directory for this category.
  324. #
  325. # If this option is empty, then the default destination directory
  326. # (option <DestDir>) is used. In this case if the option <AppendCategoryDir>
  327. # is active, the program creates a subdirectory with category name within
  328. # destination directory.
  329. Category1.DestDir=
  330.  
  331. # Unpack downloaded nzb-files (yes, no).
  332. #
  333. # For more information see global option <Unpack>.
  334. Category1.Unpack=yes
  335.  
  336. # Default list of post-processing scripts.
  337. #
  338. # For more information see global option <PostScript>.
  339. Category1.PostScript=
  340.  
  341. # List of aliases.
  342. #
  343. # When a nzb-file is added from URL, RSS or RPC the category name
  344. # is usually supplied by nzb-site or by application accessing
  345. # NZBGet. Using Aliases you can match their categories with your owns.
  346. #
  347. # Separate aliases with commas or semicolons. Use wildcard-characters
  348. # * and ? for pattern matching.
  349. #
  350. # Example: TV - HD, TV - SD, TV*
  351. Category1.Aliases=
  352.  
  353. Category2.Name=Series
  354. Category3.Name=Music
  355. Category4.Name=Software
  356.  
  357.  
  358. ##############################################################################
  359. ### RSS FEEDS ###
  360.  
  361. # Name of RSS Feed.
  362. #
  363. # The name is used in UI and for logging. It can be any string.
  364. #Feed1.Name=my feed
  365.  
  366. # Address (URL) of RSS Feed.
  367. #
  368. # Example: https://myindexer.com/api?apikey=3544646bfd1c535a9654645609800901&t=search&q=game.
  369. #
  370. # NOTE: When the feed is fetched for the very first time all existing
  371. # items are ignored. The items found on subsequentional fetches are processed.
  372. #Feed1.URL=
  373.  
  374. # Filter rules for items.
  375. #
  376. # Use filter to ignore unwanted items in the feed. In its simplest version
  377. # the filter is a space separated list of words which must be present in
  378. # the item title.
  379. #
  380. # Example: linux debian dvd.
  381. #
  382. # MORE INFO:
  383. # NOTE: This is a short documentation, for more information visit
  384. # http://nzbget.net/RSS.
  385. #
  386. # Feed filter consists of rules - one rule per line. Each rule defines
  387. # a search string and a command, which must be performed if the search
  388. # string matches. There are five kinds of rule-commands: Accept,
  389. # Reject, Require, Options, Comment.
  390. #
  391. # NOTE: Since options in the configuration file can not span multiple
  392. # lines, the lines (rules) must be separated with %-character (percent).
  393. #
  394. # Definition of a rule:
  395. # [A:|A(options):|R:|Q:|O(options):|#] search-string
  396. #
  397. # A - declares Accept-rule. Rules are accept-rules by default, the
  398. # "A:" can be imitted. If the feed item matches to the rule the
  399. # item is considered good and no further rules are checked.
  400. # R - declares Reject-rule. If the feed item matches to the rule the
  401. # item is considered bad and no further rules are checked.
  402. # Q - declares Require-rule. If the feed item DOES NOT match to the rule
  403. # the item is considered bad and no further rules are checked.
  404. # O - declares Options-rule. If the feed item matches to the rule the
  405. # options declared in the rule are set for the item. The item is
  406. # neither accepted nor rejected via this rule but can be accepted
  407. # later by one of Accept-rules. In this case the item will have its
  408. # options already set (unless the Accept-rule overrides them).
  409. # # - lines starting with # are considered comments and are ignored. You
  410. # can use comments to explain complex rules or to temporary disable
  411. # rules for debugging.
  412. #
  413. # Options allow to set properties on nzb-file. It's a comma-separated
  414. # list of property names with their values.
  415. #
  416. # Definition of an option:
  417. # name:value
  418. #
  419. # Options can be defined using long option names or short names:
  420. # category (cat, c) - set category name, value is a string;
  421. # pause (p) - add nzb in paused or unpaused state, possible
  422. # values are: yes (y), no (n);
  423. # priority (pr, r) - set priority, value is a signed integer number;
  424. # priority+ (pr+, r+) - increase priority, value is a signed integer number;
  425. # dupescore (ds, s) - set duplicate score, value is a signed integer number;
  426. # dupescore+ (ds+, s+) - increase duplicate score, value is a signed integer number;
  427. # dupekey (dk, k) - set duplicate key, value is a string;
  428. # dupekey+ (dk+, k+) - add to duplicate key, value is a string;
  429. # dupemode (dm, m) - set duplicate check mode, possible values
  430. # are: score (s), all (a), force (f);
  431. # rageid - generate duplicate key using this rageid
  432. # (integer number) and season/episode numbers;
  433. # series - generate duplicate key using series identifier
  434. # (any unique string) and season/episode numbers.
  435. #
  436. # Examples of option definitions:
  437. # Accept(category:my series, pause:yes, priority:100): my show 1080p;
  438. # Options(c:my series, p:y, r:100): 1080p;
  439. # Options(s:1000): 1080p;
  440. # Options(k+:1080p): 1080p;
  441. # Options(dupemode:force): BluRay.
  442. #
  443. # Rule-options override values set in feed-options.
  444. #
  445. # The search-string is similar to used in search engines. It consists of
  446. # search terms separated with spaces. Every term is checked for a feed
  447. # item and if they all succeed the rule is considered matching.
  448. #
  449. # Definition of a term:
  450. # [+|-][field:][command]param
  451. #
  452. # + - declares a positive term. Terms are positive by default,
  453. # the "+" can be omitted;
  454. # - - declares a negative term. If the term succeed the feed
  455. # item is ignored;
  456. # field - field to which apply the term. If not specified
  457. # the default field "title" is used;
  458. # command - a special character defining how to interpret the
  459. # parameter (followed after the command):
  460. # @ - search for string "param". This is default command,
  461. # the "@" can be omitted;
  462. # $ - "param" defines a regular expression (using POSIX Extended
  463. # Regular Expressions syntax);
  464. # = - equal;
  465. # < - less than;
  466. # <= - equal or less than;
  467. # > - greater than;
  468. # >= - equal or greater than;
  469. # param - parameter for command.
  470. #
  471. # Commands @ and $ are for use with text fields (title, filename, category,
  472. # link, description, dupekey). Commands =, <, <=, > and >= are for use
  473. # with numeric fields (size, age, imdbid, rageid, season, episode, priority,
  474. # dupescore).
  475. #
  476. # Only fields title, filename and age are always present. The availability of
  477. # other fields depend on rss feed provider.
  478. #
  479. # Any newznab attribute (encoded as "newznab:attr" in the RSS feed) can
  480. # be used as search field with prefix "attr-", for example "attr-genre".
  481. #
  482. # Text search (Command @) supports supports wildcard characters * (matches
  483. # any number of any characters), ? (matches any one character)
  484. # and # (matches one digit).
  485. # Text search is by default performed against words (word-search mode): the
  486. # field content is separated into words and then each word is checked
  487. # against pattern. If the search pattern starts and ends with * (star)
  488. # the search is performed against the whole field content
  489. # (substring-search mode). If the search pattern contains word separator
  490. # characters (except * and ?) the search is performed on the whole
  491. # field (the word-search would be obviously never successful in this
  492. # case). Word separators are: !\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~.
  493. #
  494. # Field "size" can have suffixes "K" or "KB" for kilobytes, "M" or "MB"
  495. # for megabytes and "G" or "GB" for gigabytes. Field "age" can have
  496. # suffixes "m" for minutes, "h" for hours and "d" for days. If suffix
  497. # is not specified default is days.
  498. #
  499. # Examples (the trailing ; or . is not part of filter):
  500. # 1) A: s01* -category:anime;
  501. # 2) my show WEB-DL;
  502. # 3) *my?show* WEB-DL size:<1.8GB age:>2h;
  503. # 4) R: size:>9GB;
  504. # 5) Q: HDTV.
  505. #
  506. # NOTE: This is a short documentation, for more information visit
  507. # http://nzbget.net/RSS.
  508. #Feed1.Filter=
  509.  
  510. # How often to check for new items (minutes).
  511. #
  512. # Value "0" disables the automatic check of this feed.
  513. #Feed1.Interval=15
  514.  
  515. # Add nzb-files as paused (yes, no).
  516. #Feed1.PauseNzb=no
  517.  
  518. # Category for added nzb-files.
  519. #
  520. # NOTE: Feed providers may include category name within response when nzb-file
  521. # is downloaded. If you want to use the providers category leave the option empty.
  522. #Feed1.Category=
  523.  
  524. # Priority for added nzb-files (number).
  525. #
  526. # Priority can be any integer value. The web-interface however operates
  527. # with only six predefined priorities: -100 (very low priority), -50
  528. # (low priority), 0 (normal priority, default), 50 (high priority),
  529. # 100 (very high priority) and 900 (force priority). Downloads with
  530. # priorities equal to or greater than 900 are downloaded and
  531. # post-processed even if the program is in paused state (force mode).
  532. #Feed1.Priority=0
  533.  
  534.  
  535. ##############################################################################
  536. ### INCOMING NZBS ###
  537.  
  538. # Create subdirectory with category-name in destination-directory (yes, no).
  539. AppendCategoryDir=no
  540.  
  541. # How often incoming-directory (option <NzbDir>) must be checked for new
  542. # nzb-files (seconds).
  543. #
  544. # Value "0" disables the check.
  545. #
  546. # NOTE: nzb-files are processed by scan and queue scripts. See
  547. # options <ScanScript> and <QueueScript>.
  548. NzbDirInterval=5
  549.  
  550. # How old nzb-file should at least be for it to be loaded to queue (seconds).
  551. #
  552. # NZBGet checks if nzb-file was not modified in last few seconds, defined by
  553. # this option. That safety interval prevents the loading of files, which
  554. # were not yet completely saved to disk, for example if they are still being
  555. # downloaded in web-browser.
  556. NzbDirFileAge=60
  557.  
  558. # Check for duplicate titles (yes, no).
  559. #
  560. # If this option is enabled the program checks by adding of a new nzb-file:
  561. # 1) if history contains the same title (see below) with success status
  562. # the nzb-file is not added to queue;
  563. # 2) if download queue already contains the same title the nzb-file is
  564. # added to queue for backup (if firt file fails);
  565. # 3) if nzb-file contains duplicate entries. This helps to find errors
  566. # in bad nzb-files.
  567. #
  568. # "Same title" means the nzb file name is same or the duplicate key is
  569. # same. Duplicate keys are set by fetching from RSS feeds using title
  570. # identifier fields provided by RSS provider (imdbid or rageid/season/episode).
  571. #
  572. # If duplicates were detected only one of them is downloaded. If download
  573. # fails another duplicate is tried. If download succeeds all remaining
  574. # duplicates are deleted from queue.
  575. #
  576. # NOTE: For automatic duplicate handling option <HealthCheck> must be
  577. # set to "Delete" or "None". If it is set to "Pause" you will need to
  578. # manually unpause another duplicate (if any exists in queue).
  579. #
  580. # NOTE: For more info on duplicates see http://nzbget.net/RSS.
  581. DupeCheck=yes
  582.  
  583.  
  584. ##############################################################################
  585. ### DOWNLOAD QUEUE ###
  586.  
  587. # Save download queue to disk (yes, no).
  588. #
  589. # This allows to reload it on next start.
  590. SaveQueue=yes
  591.  
  592. # Reload download queue on start, if it exists (yes, no).
  593. ReloadQueue=yes
  594.  
  595. # Continue download of partially downloaded files (yes, no).
  596. #
  597. # If active the current state (the info about what articles were already
  598. # downloaded) is saved every second and is reloaded after restart. This is
  599. # about files included in download jobs (usually rar-files), not about
  600. # download-jobs (nzb-files) itself. Download-jobs are always
  601. # continued regardless of that option.
  602. #
  603. # Disabling this option may slighlty reduce disk access and is
  604. # therefore recommended on fast connections.
  605. ContinuePartial=yes
  606.  
  607. # Propagation delay to your news servers (minutes).
  608. #
  609. # The option sets minimum post age for nzb-files. Very recent files
  610. # are not downloaded to avoid download failures. The files remain
  611. # on hold in the download queue until the propagation delay expires,
  612. # after that they are downloaded.
  613. PropagationDelay=0
  614.  
  615. # Decode articles (yes, no).
  616. #
  617. # yes - decode articles using internal decoder (supports yEnc and UU formats);
  618. # no - articles will not be decoded/joined. Useful to look at article's source text.
  619. #
  620. # NOTE: This option is primary for debugging purposes. You should not
  621. # disable it.
  622. Decode=yes
  623.  
  624. # Memory limit for article cache (megabytes).
  625. #
  626. # Article cache helps to improve performance. First the amount of disk
  627. # operations can be significantly reduced. Second the created files are
  628. # less fragmented, which again speeds up the post-processing (unpacking).
  629. #
  630. # The article cache works best with option <DirectWrite> which can
  631. # effectively use even small cache (like 50 MB).
  632. #
  633. # If option <DirectWrite> is disabled the cache should be big enough to
  634. # hold all articles of one file (typically up to 200 MB, sometimes even
  635. # 500 MB). Otherwise the articles are written into temporary directory
  636. # when the cache is full, which degrades performance.
  637. #
  638. # Value "0" disables article cache.
  639. #
  640. # In 32 bit mode the maximum allowed value is 1900.
  641. #
  642. # NOTE: Also see option <WriteBuffer>.
  643. ArticleCache=700
  644.  
  645. # Write decoded articles directly into destination output file (yes, no).
  646. #
  647. # Files are posted to Usenet in multiple pieces (articles). Each file
  648. # typically consists of hundreds of articles.
  649. #
  650. # When option <DirectWrite> is disabled and the article cache (option
  651. # <ArticleCache>) is not active or is full the program saves downloaded
  652. # articles into temporary directory and later reads them all to write
  653. # again into the destination file.
  654. #
  655. # When option <DirectWrite> is enabled the program at first creates the
  656. # output destination file with required size (total size of all articles),
  657. # then writes the articles directly to this file without creating of any
  658. # temporary files. If article cache (option <ArticleCache>) is active
  659. # the downloaded articles are saved into cache first and are written
  660. # into the destination file when the cache flushes. This happen when
  661. # all articles of the file are downloaded or when the cache becomes
  662. # full to 90%.
  663. #
  664. # The direct write relies on the ability of file system to create
  665. # empty files without allocating the space on the drive (sparse files),
  666. # which most modern file systems support including EXT3, EXT4
  667. # and NTFS. The notable exception is HFS+ (default file system on OSX).
  668. #
  669. # The direct write usually improves performance by reducing the amount
  670. # of disk operations but may produce more fragmented files when used
  671. # without article cache.
  672. DirectWrite=no
  673.  
  674. # Memory limit for per article write buffer (kilobytes).
  675. #
  676. # When downloaded articles are written into disk the OS collects
  677. # data in the internal buffer before flushing it into disk. This option
  678. # controls the size of this buffer per connection/download thread.
  679. #
  680. # Larger buffers decrease the amount of disk operations and help
  681. # producing less fragmented files speeding up the post-processing
  682. # (unpack).
  683. #
  684. # To calculate the maximum memory required for all download threads multiply
  685. # WriteBuffer by number of connections configured in section
  686. # "NEWS-SERVERS". The option sets the limit, the actual buffer can be
  687. # smaller if the article size (typically about 500 KB) is below the limit.
  688. #
  689. # Write-buffer is managed by OS (system libraries) and therefore
  690. # the effect of the option is highly OS-dependent.
  691. #
  692. # Recommended value for computers with enough memory: 1024.
  693. #
  694. # Value "0" disables the setting of buffer size. In this case a buffer
  695. # of default size (OS and compiler specific) is used, which is usually
  696. # too small (1-4 KB) and therefore not optimal.
  697. #
  698. # NOTE: Also see option <ArticleCache>.
  699. WriteBuffer=1024
  700.  
  701. # Check CRC of downloaded and decoded articles (yes, no).
  702. #
  703. # Normally this option should be enabled for better detecting of download
  704. # errors. However checking of CRC needs CPU time. On a fast connection and
  705. # slow CPU disabling of CRC-Check may improve performance.
  706. CrcCheck=yes
  707.  
  708. # How many retries should be attempted if a download error occurs (0-99).
  709. #
  710. # 1) If download fails because of "article or group not found error" the
  711. # program tries another news server.
  712. #
  713. # 2) If download fails because of interrupted connection, the program
  714. # tries the same server again until connection can be established.
  715. #
  716. # In both cases 1) and 2) option <Retries> is not used.
  717. #
  718. # If download however fails because of incomplete article, CRC-error or other
  719. # error not mentioned above the program tries to redownload the article from
  720. # the same news server as many times as defined in option <Retries>. If all
  721. # attempts fail the program tries another news server.
  722. Retries=3
  723.  
  724. # Set the interval between retries (seconds).
  725. RetryInterval=10
  726.  
  727. # Set connection timeout for article downloading (seconds).
  728. ArticleTimeout=60
  729.  
  730. # Set connection timeout for URL fetching (seconds).
  731. #
  732. # This includes fetching of nzb-files via URLs and fetching of RSS feeds.
  733. UrlTimeout=60
  734.  
  735. # Timeout until a download-thread should be killed (seconds).
  736. #
  737. # This can help on hanging downloads, but is dangerous.
  738. # Do not use small values!
  739. TerminateTimeout=600
  740.  
  741. # Set the maximum download rate on program start (kilobytes/sec).
  742. #
  743. # The download rate can be changed later via remote calls.
  744. #
  745. # Value "0" means no speed control.
  746. DownloadRate=0
  747.  
  748. # Accurate speed rate calculation (yes, no).
  749. #
  750. # During downloading using several connections the download threads may
  751. # interfere with each other when updating statistical data for speed
  752. # meter. This may cause small errors in current download speed reported
  753. # by the program. The speed meter recovers automatically from such errors
  754. # after max. 30 seconds (time window used for speed calculation).
  755. #
  756. # Enable the option to use thread synchronisation mechanisms in order to
  757. # provide absolutely accurate speed calculations.
  758. #
  759. # NOTE: Thread synchronisation increases CPU load and therefore can
  760. # decrease download speed. Do not activate this option on computers with
  761. # limited CPU power. Before activating the option it is recommended to
  762. # run tests to determine how the option affects the CPU usage and the
  763. # download speed on a particular system.
  764. AccurateRate=no
  765.  
  766. # Pause if disk space gets below this value (megabytes).
  767. #
  768. # Disk space is checked for directories pointed by option <DestDir> and
  769. # option <InterDir>.
  770. #
  771. # Value "0" disables the check.
  772. DiskSpace=250
  773.  
  774. # Delete already downloaded files from disk when nzb-file is deleted
  775. # (yes, no).
  776. #
  777. # This option defines if downloaded files must be deleted when:
  778. # 1) download of nzb-file is cancelled (deleted from queue);
  779. # 2) history record with failure-status (par-failure or unpack-failure)
  780. # is deleted from history.
  781. DeleteCleanupDisk=yes
  782.  
  783. # Delete source nzb-file when it is not needed anymore (yes, no).
  784. #
  785. # Enable this option for automatic deletion of source nzb-file from
  786. # incoming directory when the program doesn't require it anymore (the
  787. # nzb-file has been deleted from queue and history).
  788. NzbCleanupDisk=yes
  789.  
  790. # Keep the history of downloaded nzb-files (days).
  791. #
  792. # After download and post-processing the items are added to history where
  793. # their status can be checked and they can be post-processed again if
  794. # neccessary.
  795. #
  796. # After expiring of defined period:
  797. #
  798. # If option <DupeCheck> is active the items become hidden and the amount
  799. # of data kept is significantly reduced (for better performance), only
  800. # fields necessary for duplicate check are kept. The item remain in the
  801. # hidden history (forever);
  802. #
  803. # If option <DupeCheck> is NOT active the items are removed from history.
  804. #
  805. # Value "0" disables history. Duplicate check will not work.
  806. KeepHistory=30
  807.  
  808. # Keep the history of outdated feed items (days).
  809. #
  810. # After fetching of an RSS feed the information about included items (nzb-files)
  811. # is saved to disk. This allows to detect new items on next fetch. Feed
  812. # providers update RSS feeds constantly. Since the feed length is limited
  813. # (usually 100 items or less) the old items get pushed away by new
  814. # ones. When an item is not present in the feed anymore it's not necessary
  815. # to keep the information about this item on the disk.
  816. #
  817. # If option is set to "0", the outdated items are deleted from history
  818. # immediately.
  819. #
  820. # Otherwise the items are held in the history for defined number of
  821. # days. Keeping of items for few days helps in situations when feed provider
  822. # has technical issues and may response with empty feeds (or with missing
  823. # items). When the technical issue is fixed the items may reappear in the
  824. # feed causing the program to redownload items if they were not found in
  825. # the feed history.
  826. FeedHistory=7
  827.  
  828. # Maximum number of simultaneous connections for nzb URL downloads (0-999).
  829. #
  830. # When NZB-files are added to queue via URL, the program downloads them
  831. # from the specified URL. The option limits the maximal number of connections
  832. # used for this purpose, when multiple URLs were added at the same time.
  833. UrlConnections=4
  834.  
  835. # Force URL-downloads even if download queue is paused (yes, no).
  836. #
  837. # If option is active the URL-downloads (such as appending of nzb-files
  838. # via URL or fetching of RSS feeds and nzb-files from feeds) are performed
  839. # even if download is in paused state.
  840. UrlForce=yes
  841.  
  842.  
  843. ##############################################################################
  844. ### LOGGING ###
  845.  
  846. # How to use log file (none, append, reset, rotate).
  847. #
  848. # none - do not write into log file;
  849. # append - append to the existing log file or create it;
  850. # reset - delete existing log file on program start and create a new one;
  851. # rotate - create new log file for each day, delete old files,
  852. # see option <RotateLog>.
  853. WriteLog=append
  854.  
  855. # Log file rotation period (days).
  856. #
  857. # Defines how long to keep old log-files, when log rotation is active
  858. # (option <WriteLog> is set to "rotate").
  859. RotateLog=3
  860.  
  861.  
  862. # How error messages must be printed (screen, log, both, none).
  863. ErrorTarget=both
  864.  
  865. # How warning messages must be printed (screen, log, both, none).
  866. WarningTarget=both
  867.  
  868. # How info messages must be printed (screen, log, both, none).
  869. InfoTarget=both
  870.  
  871. # How detail messages must be printed (screen, log, both, none).
  872. DetailTarget=log
  873.  
  874. # How debug messages must be printed (screen, log, both, none).
  875. #
  876. # Debug-messages can be printed only if the program was compiled in
  877. # debug-mode: "./configure --enable-debug".
  878. DebugTarget=both
  879.  
  880. # Number of messages stored in buffer and available for remote
  881. # clients (messages).
  882. LogBufferSize=1000
  883.  
  884. # Create a log of all broken files (yes ,no).
  885. #
  886. # It is a text file placed near downloaded files, which contains
  887. # the names of broken files.
  888. CreateBrokenLog=yes
  889.  
  890. # Create memory dump (core-file) on abnormal termination, Linux only (yes, no).
  891. #
  892. # Core-files are very helpful for debugging.
  893. #
  894. # NOTE: Core-files may contain sensible data, like your login/password to
  895. # newsserver etc.
  896. DumpCore=no
  897.  
  898. # Local time correction (hours or minutes).
  899. #
  900. # The option allows to adjust timestamps when converting system time to
  901. # local time and vice versa. The conversion is used when printing messages
  902. # to the log-file and by option "TaskX.Time" in the scheduler settings.
  903. #
  904. # The option is usually not needed if the time zone is set up correctly.
  905. # However, sometimes, especially when using a binary compiled on onother
  906. # platform (cross-compiling) the conversion between system and local time
  907. # may not work properly and requires adjustment.
  908. #
  909. # Values in the range -24..+24 are interpreted as hours, other values as minutes.
  910. # Example 1: set time correction to one hour: TimeCorrection=1;
  911. # Example 2: set time correction to one hour and a half: TimeCorrection=90.
  912. TimeCorrection=0
  913.  
  914. # See also option <LogFile> in section "PATHS"
  915.  
  916.  
  917. ##############################################################################
  918. ### DISPLAY (TERMINAL) ###
  919.  
  920. # Set screen-outputmode (loggable, colored, curses).
  921. #
  922. # loggable - only messages will be printed to standard output;
  923. # colored - prints messages (with simple coloring for messages categories)
  924. # and download progress info; uses escape-sequences to move cursor;
  925. # curses - advanced interactive interface with the ability to edit
  926. # download queue and various output option.
  927. OutputMode=curses
  928.  
  929. # Shows NZB-Filename in file list in curses-outputmode (yes, no).
  930. #
  931. # This option controls the initial state of curses-frontend,
  932. # it can be switched on/off in run-time with Z-key.
  933. CursesNzbName=yes
  934.  
  935. # Show files in groups (NZB-files) in queue list in curses-outputmode (yes, no).
  936. #
  937. # This option controls the initial state of curses-frontend,
  938. # it can be switched on/off in run-time with G-key.
  939. CursesGroup=no
  940.  
  941. # Show timestamps in message list in curses-outputmode (yes, no).
  942. #
  943. # This option controls the initial state of curses-frontend,
  944. # it can be switched on/off in run-time with T-key.
  945. CursesTime=no
  946.  
  947. # Update interval for Frontend-output in console mode or remote client
  948. # mode (milliseconds).
  949. #
  950. # Min value 25. Bigger values reduce CPU usage (especially in curses-outputmode)
  951. # and network traffic in remote-client mode.
  952. UpdateInterval=200
  953.  
  954.  
  955. ##############################################################################
  956. ### SCHEDULER ###
  957.  
  958. # Time to execute the command (HH:MM).
  959. #
  960. # Multiple comma-separated values are accepted.
  961. # Asterix as hours-part means "every hour".
  962. #
  963. # Examples: "08:00", "00:00,06:00,12:00,18:00", "*:00", "*:00,*:30".
  964. #
  965. # NOTE: Also see option <TimeCorrection>.
  966. #Task1.Time=08:00
  967.  
  968. # Week days to execute the command (1-7).
  969. #
  970. # Comma separated list of week days numbers.
  971. # 1 is Monday.
  972. # Character '-' may be used to define ranges.
  973. #
  974. # Examples: "1-7", "1-5", "5,6", "1-5, 7".
  975. #Task1.WeekDays=1-7
  976.  
  977. # Command to be executed (PauseDownload, UnpauseDownload, PausePostProcess,
  978. # UnpausePostProcess, PauseScan, UnpauseScan, DownloadRate, Script, Process,
  979. # ActivateServer, DeactivateServer, FetchFeed).
  980. #
  981. # Possible commands:
  982. # PauseDownload - pause download;
  983. # UnpauseDownload - resume download;
  984. # PausePostProcess - pause post-processing;
  985. # UnpausePostProcess - resume post-processing;
  986. # PauseScan - pause scan of incoming nzb-directory;
  987. # UnpauseScan - resume scan of incoming nzb-directory;
  988. # DownloadRate - set download rate limit;
  989. # Script - execute one or multiple scheduler scripts. The scripts
  990. # must be written specially for NZBGet;
  991. # Process - execute an external (any) program;
  992. # ActivateServer - activate news-server;
  993. # DeactivateServer - deactivate news-server;
  994. # FetchFeed - fetch RSS feed.
  995. #
  996. # On start the program checks all tasks and determines current state
  997. # for download-pause, scan-pause, download-rate and active servers.
  998. #Task1.Command=PauseDownload
  999.  
  1000. # Parameters for the command if needed.
  1001. #
  1002. # Some scheduler commands require additional parameters:
  1003. # DownloadRate - download rate limit to be set (kilobytes/sec).
  1004. # Example: 1000;
  1005. # Script - list of scheduler scripts to execute. The scripts in
  1006. # the list must be separated with commas or semicolons. Only
  1007. # filenames without path must be used. All scripts must be
  1008. # stored in directory pointed by option <ScriptDir>. For
  1009. # more info see below;
  1010. # Process - path to the program to execute and its parameters.
  1011. # Example: /home/user/fetch.sh.
  1012. # If filename or any parameter contains spaces it
  1013. # must be surrounded with single quotation
  1014. # marks. If filename/parameter contains single quotation marks,
  1015. # each of them must be replaced with two single quotation
  1016. # marks and the resulting filename/parameter must be
  1017. # surrounded with single quotation marks.
  1018. # Example: '/home/user/download/my scripts/task process.sh' 'world''s fun'.
  1019. # In this example one parameter (world's fun) is passed
  1020. # to the script (task process.sh).
  1021. # ActivateServer - comma separated list of news server ids or server names.
  1022. # Example: 1,3.
  1023. # Example: my news server 1, my news server 2.
  1024. # NOTE: server names should not have commas.
  1025. # DeactivateServer - see ActivateServer.
  1026. # FetchFeed - comma separated list of RSS feed ids or feed names.
  1027. # Example: 1,3.
  1028. # Example: bookmarks feed, another feed.
  1029. # NOTE: feed names should not have commas.
  1030. # NOTE: use feed id "0" to fetch all feeds.
  1031. #
  1032. # INFO FOR DEVELOPERS:
  1033. # The rest of the description is for command "Script".
  1034. #
  1035. # NOTE: This is a short documentation, for more information visit
  1036. # http://nzbget.net/Extension_scripts.
  1037. #
  1038. # NZBGet passes following arguments to scheduler script as environment
  1039. # variables:
  1040. # NZBSP_TASKID - id number of scheduler Task.
  1041. #
  1042. # In addition to these arguments NZBGet passes all nzbget.conf-options
  1043. # as environment variables. These variables have prefix "NZBOP_" and
  1044. # are written in UPPER CASE. For Example option "ParRepair" is passed as
  1045. # environment variable "NZBOP_PARREPAIR". The dots in option names are
  1046. # replaced with underscores, for example "SERVER1_HOST". For options
  1047. # with predefined possible values (yes/no, etc.) the values are passed
  1048. # always in lower case.
  1049. #
  1050. # NOTE: This is a short documentation, for more information visit
  1051. # http://nzbget.net/Extension_scripts.
  1052. #Task1.Param=
  1053.  
  1054. #Task2.Time=20:00
  1055. #Task2.WeekDays=1-7
  1056. #Task2.Command=UnpauseDownload
  1057. #Task2.Param=
  1058.  
  1059.  
  1060. ##############################################################################
  1061. ### PAR CHECK/REPAIR ###
  1062.  
  1063. # Whether and how par-verification must be performed (auto, always, force, manual).
  1064. #
  1065. # Auto - par-check is performed when needed. One par2-file is always
  1066. # downloaded. Additional par2-files are downloaded if needed
  1067. # for repair. Repair is performed if the option <ParRepair>
  1068. # is enabled;
  1069. # Always - check every download (even undamaged). One par2-file is
  1070. # always downloaded. Additional par2-files are downloaded
  1071. # if needed for repair. Repair is performed if the option
  1072. # <ParRepair> is enabled;
  1073. # Force - force par-check for every download (even undamaged). All
  1074. # par2-files are always downloaded. Repair is performed if
  1075. # the option <ParRepair> is enabled;
  1076. # Manual - par-check is skipped. One par2-file is always
  1077. # downloaded. If a damaged download is detected, all
  1078. # par2-files are downloaded but neithet par-check nor par-repair
  1079. # take place. The download can be then repaired manually,
  1080. # eventually on another faster computer.
  1081. ParCheck=auto
  1082.  
  1083. # Check for renamed and missing files (yes, no).
  1084. #
  1085. # Par-rename restores original file names using information stored
  1086. # in par2-files. It also detects missing files (files listed in
  1087. # par2-files but not present on disk). When enabled the par-rename is
  1088. # performed as the first step of post-processing for every nzb-file.
  1089. #
  1090. # Par-rename is very fast and is highly recommended, especially if
  1091. # unpack is disabled.
  1092. ParRename=yes
  1093.  
  1094. # Automatic par-repair after par-verification (yes, no).
  1095. #
  1096. # If option <ParCheck> is set to "Auto" or "Force" this option defines
  1097. # if the download must be repaired when needed. The option can be
  1098. # disabled if computer does not have enough CPU power, since repairing
  1099. # may take too much resources and time on a slow computers.
  1100. ParRepair=yes
  1101.  
  1102. # What files should be scanned during par-verification (auto, limited,
  1103. # full).
  1104. #
  1105. # Limited - scan only files belonging to the par-set;
  1106. # Full - scan all files in the directory. This helps if the
  1107. # files were renamed after creating of par-set;
  1108. # Auto - a limited scan is performed first. If the par-checker
  1109. # detects missing files, it scans other files in the
  1110. # directory until all required files are found.
  1111. ParScan=auto
  1112.  
  1113. # Quick file verification during par-check (yes, no).
  1114. #
  1115. # If the option is active the files are quickly verified using
  1116. # checksums calculated during download; quick verification is very fast
  1117. # because it doesn't require the reading of files from disk, NZBGet
  1118. # knows checksums of downloaded files and quickly compares them with
  1119. # checksums stored in the par-file.
  1120. #
  1121. # If the option is disabled the files are verified as usual. That's
  1122. # slow. Use this if the quick verification doesn't work properly.
  1123. ParQuick=yes
  1124.  
  1125. # Memory limit for par-repair buffer (megabytes).
  1126. #
  1127. # Set the amount of RAM that the par-checker may use during repair. Having
  1128. # the buffer as big as the total size of all damaged blocks allows for
  1129. # the optimal repair speed. The option sets the maximum buffer size, the
  1130. # allocated buffer can be smaller.
  1131. #
  1132. # If you have a lot of RAM set the option to few hundreds (MB) for the
  1133. # best repair performance.
  1134. ParBuffer=500
  1135.  
  1136. # Number of threads to use during par-repair (0-99).
  1137. #
  1138. # On multi-core CPUs for the best speed set the option to the number of
  1139. # logical cores (physical cores + hyper-threading units). If you want
  1140. # to utilize the CPU to 100% you may need to add one or two additional threads
  1141. # to compensate for wait intervals used for thread synchronization.
  1142. #
  1143. # On single-core CPUs use only one thread.
  1144. #
  1145. # Set to '0' to automatically use all available CPU cores (may not
  1146. # work on old or exotic platforms).
  1147. ParThreads=0
  1148.  
  1149. # Files to ignore during par-check.
  1150. #
  1151. # List of file extensions or file names to ignore by par-rename and
  1152. # par-check. The entries must be separated with commas. The entries
  1153. # can be file extensions or any text the file name may end with.
  1154. #
  1155. # If par-rename or par-check detect missing or damaged files they
  1156. # will ignore files matching this option and will not initiate
  1157. # repair. This avoids time costing repair for unimportant files.
  1158. #
  1159. # NOTE: Files matching the option <ExtCleanupDisk> are ignored as well.
  1160. #
  1161. # Example: .sfv, .nzb, .nfo
  1162. ParIgnoreExt=.sfv, .nzb, .nfo
  1163.  
  1164. # What to do if download health drops below critical health (delete,
  1165. # pause, none).
  1166. #
  1167. # Delete - delete nzb-file from queue. If option <DeleteCleanupDisk>
  1168. # is active the already downloaded files will be deleted too;
  1169. # Pause - pause nzb-file;
  1170. # None - do nothing (continue download).
  1171. #
  1172. # NOTE: For automatic duplicate handling option must be set to "Delete"
  1173. # or "None". If it is set to "Pause" you will need to manually unpause
  1174. # another duplicate (if any exists in queue). See also option <DupeCheck>.
  1175. HealthCheck=delete
  1176.  
  1177. # Maximum allowed time for par-repair (minutes).
  1178. #
  1179. # If you use NZBGet on a very slow computer like NAS-device, it may be good to
  1180. # limit the time allowed for par-repair. NZBGet calculates the estimated time
  1181. # required for par-repair. If the estimated value exceeds the limit defined
  1182. # here, NZBGet cancels the repair.
  1183. #
  1184. # To avoid a false cancellation NZBGet compares the estimated time with
  1185. # <ParTimeLimit> after the first 5 minutes of repairing, when the calculated
  1186. # estimated time is more or less accurate. But in a case if <ParTimeLimit> is
  1187. # set to a value smaller than 5 minutes, the comparison is made after the first
  1188. # whole minute.
  1189. #
  1190. # Value "0" means unlimited.
  1191. #
  1192. # NOTE: The option limits only the time required for repairing. It doesn't
  1193. # affect the first stage of parcheck - verification of files. However the
  1194. # verification speed is constant, it doesn't depend on files integrity and
  1195. # therefore it is not necessary to limit the time needed for the first stage.
  1196. ParTimeLimit=0
  1197.  
  1198. # Pause download queue during check/repair (yes, no).
  1199. #
  1200. # Enable the option to give CPU more time for par-check/repair. That helps
  1201. # to speed up check/repair on slow CPUs with fast connection (e.g. NAS-devices).
  1202. #
  1203. # NOTE: If parchecker needs additional par-files it temporarily unpauses
  1204. # the queue.
  1205. #
  1206. # NOTE: See also options <ScriptPauseQueue> and <UnpackPauseQueue>.
  1207. ParPauseQueue=no
  1208.  
  1209. # Cleanup download queue after successful check/repair (yes, no).
  1210. #
  1211. # Enable this option for automatic deletion of unneeded (paused) par-files
  1212. # from download queue after successful check/repair.
  1213. ParCleanupQueue=yes
  1214.  
  1215. # Files to delete after successful check/repair.
  1216. #
  1217. # List of file extensions or file names to delete after successful
  1218. # download. The entries must be separated with commas. The entries
  1219. # can be file extensions or any text the file name may end with.
  1220. #
  1221. # Files or extensions listed here are also ignored by par-rename
  1222. # and par-check.
  1223. #
  1224. # NOTE: See also option <ParIgnoreExt>.
  1225. #
  1226. # Example: .par2, .sfv
  1227. ExtCleanupDisk=.par2, .sfv, _brokenlog.txt
  1228.  
  1229.  
  1230. ##############################################################################
  1231. ### UNPACK ###
  1232.  
  1233. # Unpack downloaded nzb-files (yes, no).
  1234. #
  1235. # Each download (nzb-file) has a post-processing parameter "Unpack". The option
  1236. # <Unpack> is the default value assigned to this pp-parameter of the download
  1237. # when it is added to queue.
  1238. #
  1239. # When nzb-file is added to queue it can have a category assigned to it. In this
  1240. # case the option <CategoryX.Unpack> overrides the global option <Unpack>.
  1241. #
  1242. # If the download is damaged and could not be repaired using par-files
  1243. # the unpacking is not performed.
  1244. #
  1245. # If the option <ParCheck> is set to "Auto" the program tries to unpack
  1246. # downloaded files first. If the unpacking fails the par-check/repair
  1247. # is performed and the unpack is executed again.
  1248. Unpack=yes
  1249.  
  1250. # Pause download queue during unpack (yes, no).
  1251. #
  1252. # Enable the option to give CPU more time for unpacking. That helps
  1253. # to speed up unpacking on slow CPUs.
  1254. #
  1255. # NOTE: See also options <ParPauseQueue> and <ScriptPauseQueue>.
  1256. UnpackPauseQueue=no
  1257.  
  1258. # Delete archive files after successful unpacking (yes, no).
  1259. UnpackCleanupDisk=yes
  1260.  
  1261. # Full path to unrar executable.
  1262. #
  1263. # Example: /usr/bin/unrar.
  1264. #
  1265. # If unrar is in your PATH you may leave the path part and set only
  1266. # the executable name ("unrar" on POSIX or "unrar.exe" on Windows).
  1267. UnrarCmd=${AppDir}/unrar
  1268.  
  1269. # Full path to 7-Zip executable.
  1270. #
  1271. # Example: /usr/bin/7z.
  1272. #
  1273. # If 7-Zip binary is in your PATH you may leave the path part and set only
  1274. # the executable name ("7z" or "7za" on POSIX or "7z.exe" on Windows).
  1275. SevenZipCmd=${AppDir}/7zr
  1276.  
  1277.  
  1278. ##############################################################################
  1279. ### EXTENSION SCRIPTS ###
  1280.  
  1281. # Default list of post-processing scripts to execute after the download
  1282. # of nzb-file is completed and possibly par-checked/repaired and unpacked.
  1283. #
  1284. # The scripts in the list must be separated with commas or semicolons. Only
  1285. # filenames without path must be used. All scripts must be stored in directory
  1286. # pointed by option <ScriptDir>.
  1287. #
  1288. # Example: Cleanup.sh, Move.sh, EMail.py.
  1289. #
  1290. # Each download (nzb-file) has its own list of post-processing scripts. The option
  1291. # <PostScript> is the default value assigned to download when it is added to
  1292. # queue. The list of post-processing scripts for a particular download can be
  1293. # changed in the edit dialog in web-interface or using remote command "--edit/-E".
  1294. #
  1295. # When nzb-file is added to queue it can have a category assigned to it. In this
  1296. # case the option <CategoryX.PostScript> (if not empty) overrides the
  1297. # global option <PostScript>.
  1298. #
  1299. # NOTE: The script execution order is controlled by option <ScriptOrder>, not
  1300. # by their order in option <PostScript>.
  1301. #
  1302. # NOTE: Changing options <PostScript> and <CategoryX.PostScript> doesn't affect
  1303. # already queued downloads.
  1304. #
  1305. # NOTE: For the list of interesting post-processing scripts see
  1306. # http://nzbget.net/Catalog_of_post-processing_scripts.
  1307. #
  1308. # INFO FOR DEVELOPERS:
  1309. # NOTE: This is a short documentation, for more information visit
  1310. # http://nzbget.net/Extension_scripts.
  1311. #
  1312. # NZBGet passes following arguments to post-processing script as environment
  1313. # variables:
  1314. # NZBPP_DIRECTORY - path to destination dir for downloaded files;
  1315. # NZBPP_NZBNAME - user-friendly name of processed nzb-file as it is displayed
  1316. # by the program. The file path and extension are removed.
  1317. # If download was renamed, this parameter reflects the new name;
  1318. # NZBPP_NZBFILENAME - name of processed nzb-file. It includes file extension and also
  1319. # may include full path;
  1320. # NZBPP_FINALDIR - final destination path if set by one of previous pp-scripts;
  1321. # NZBPP_CATEGORY - category assigned to nzb-file (can be empty string);
  1322. # NZBPP_TOTALSTATUS - total status of nzb-file:
  1323. # SUCCESS - everything OK;
  1324. # WARNING - download is damaged but probably can
  1325. # be repaired; user intervention is
  1326. # required;
  1327. # FAILURE - download has failed or a serious error
  1328. # occurred during post-processing (unpack, par);
  1329. # DELETED - download was deleted; post-processing
  1330. # scripts are usually not called in this case;
  1331. # however it's possible to force calling
  1332. # scripts with command "post-process again";
  1333. # NZBPP_STATUS - complete status info for nzb-file: it consists
  1334. # of total status and status detail separated with
  1335. # slash, for example: "FAILURE/UNPACK"; for possible
  1336. # status details see documentation on web site;
  1337. # NZBPP_SCRIPTSTATUS - summary status of the scripts executed before the
  1338. # current one:
  1339. # NONE - no other scripts were executed yet or all
  1340. # of them have ended with exit code "NONE";
  1341. # SUCCESS - all other scripts have ended with exit
  1342. # code "SUCCESS" ;
  1343. # FAILURE - at least one of the script has failed;
  1344. # NZBPP_HEALTH - download health: an integer value in the range
  1345. # from 0 (all articles failed) to 1000 (all articles
  1346. # successfully downloaded);
  1347. # NZBPP_CRITICALHEALTH - critical health for this nzb-file: an integer
  1348. # value in the range 0-1000. The critical health
  1349. # is calculated based on number and size of
  1350. # par-files. If nzb-file doesn't have any par-files
  1351. # the critical health is 1000 (100.0%). If a half
  1352. # of nzb-file were par-files its critical health
  1353. # would be 0. If NZBPP_HEALTH goes down below
  1354. # NZBPP_CRITICALHEALTH the download becomes unrepairable;
  1355. # NZBPP_TOTALARTICLES - number of articles in nzb-file;
  1356. # NZBPP_SUCCESSARTICLES - number of successfully downloaded articles;
  1357. # NZBPP_FAILEDARTICLES - number of failed articles;
  1358. # NZBPP_SERVERX_SUCCESSARTICLES - number of successfully downloaded
  1359. # articles from ServerX (X is replaced with server
  1360. # number, for example NZBPP_SERVER1_SUCCESSARTICLES);
  1361. # NZBPP_SERVERX_FAILEDARTICLES - number of failed articles from ServerX.
  1362. #
  1363. # If the script defines own options they are also passed as environment
  1364. # variables. These variables have prefix "NZBPO_" in their names. For
  1365. # example, option "myoption" will be passed as environment variable
  1366. # "NZBPO_myoption" and in addition in uppercase as "NZBPO_MYOPTION".
  1367. #
  1368. # If the script defines own post-processing parameters, they are also passed as
  1369. # environment variables. These variables have prefix "NZBPR_" in their
  1370. # names. For example, pp-parameter "myparam" will be passed as environment
  1371. # variable "NZBPR_myparam" and in addition in uppercase as "NZBPR_MYPARAM".
  1372. #
  1373. # In addition to arguments, pp-options and pp-parameters NZBGet passes all
  1374. # nzbget.conf-options to pp-script as environment variables. These
  1375. # variables have prefix "NZBOP_" and are written in UPPER CASE. For Example
  1376. # option "ParRepair" is passed as environment variable "NZBOP_PARREPAIR". The
  1377. # dots in option names are replaced with underscores, for example
  1378. # "SERVER1_HOST". For options with predefined possible values (yes/no, etc.)
  1379. # the values are passed always in lower case.
  1380. #
  1381. # If the script moves files it can inform the program about new location
  1382. # by printing special message into standard output (which is processed
  1383. # by NZBGet):
  1384. # echo "[NZB] DIRECTORY=/path/to/moved/files";
  1385. # or:
  1386. # echo "[NZB] FINALDIR=/path/to/moved/files";
  1387. #
  1388. # Command "DIRECTORY" changes the destiantion path of the download and
  1389. # affects the scripts executed after the current script as well as the
  1390. # program code itself, for example the command "Post-process again"
  1391. # will work on new location. Command "FINALDIR" just sets a separate
  1392. # property of the download and should be used when the files are moved
  1393. # into an existing directory containg other files to avoid the processing
  1394. # of those files by other scripts.
  1395. #
  1396. # To assign post-processing parameters:
  1397. # echo "[NZB] NZBPR_myvar=my value";
  1398. #
  1399. # The prefix "NZBPR_" will be removed. In this example a post-processing
  1400. # parameter with name "myvar" and value "my value" will be associated
  1401. # with nzb-file.
  1402. #
  1403. # To inform NZBGet about bad download:
  1404. # echo "[NZB] MARK=BAD";
  1405. #
  1406. # Return value: NZBGet processes the exit code returned by the script:
  1407. # 93 - post-process successful (status = SUCCESS);
  1408. # 94 - post-process failed (status = FAILURE);
  1409. # 95 - post-process skipped (status = NONE). Use this code when you script
  1410. # terminates immediateley without doing any job and when this is not
  1411. # a failure termination;
  1412. # 92 - request NZBGet to do par-check/repair for current nzb-file.
  1413. #
  1414. # All other return codes are interpreted as failure (status = FAILURE).
  1415. #
  1416. # NOTE: This is a short documentation, for more information visit
  1417. # http://nzbget.net/Extension_scripts.
  1418. PostScript=
  1419.  
  1420. # List of scan scripts to execute before a nzb-file is added to queue.
  1421. #
  1422. # The scripts in the list must be separated with commas or semicolons. Only
  1423. # filenames without path must be used. All scripts must be stored in directory
  1424. # pointed by option <ScriptDir>.
  1425. #
  1426. # The scripts are executed each time a new file is found in incoming
  1427. # directory (option <NzbDir>) or a file is received via RPC (web-interface,
  1428. # command "nzbget --append", etc.).
  1429. #
  1430. # Example: UnzipNzb.sh, ScanNotify.py.
  1431. #
  1432. # The scripts can unpack archives which were put in incoming directory, make
  1433. # filename cleanup, change nzb-name, category, priority and post-processing
  1434. # parameters of the nzb-file or do other things.
  1435. #
  1436. # INFO FOR DEVELOPERS:
  1437. # NOTE: This is a short documentation, for more information visit
  1438. # http://nzbget.net/Extension_scripts.
  1439. #
  1440. # NZBGet passes following arguments to the script as environment
  1441. # variables:
  1442. # NZBNP_DIRECTORY - path to directory, where file is located. It is a directory
  1443. # specified by the option <NzbDir> or a subdirectory;
  1444. # NZBNP_FILENAME - name of file to be processed;
  1445. # NZBNP_NZBNAME - nzb-name (without path but with extension);
  1446. # NZBNP_CATEGORY - category of nzb-file;
  1447. # NZBNP_PRIORITY - priority of nzb-file;
  1448. # NZBNP_TOP - flag indicating that the file will be added to the top
  1449. # of queue: 0 or 1;
  1450. # NZBNP_PAUSED - flag indicating that the file will be added as
  1451. # paused: 0 or 1;
  1452. # NZBNP_DUPEKEY - duplicate key of nzb-file;
  1453. # NZBNP_DUPESCORE - duplicate score of nzb-file;
  1454. # NZBNP_DUPEMODE - duplicate mode of nzb-file: SCORE, ALL, FORCE.
  1455. #
  1456. # In addition to these arguments NZBGet passes all nzbget.conf-options
  1457. # as environment variables. These variables have prefix "NZBOP_" and
  1458. # are written in UPPER CASE. For Example option "ParRepair" is passed as
  1459. # environment variable "NZBOP_PARREPAIR". The dots in option names are
  1460. # replaced with underscores, for example "SERVER1_HOST". For options
  1461. # with predefined possible values (yes/no, etc.) the values are passed
  1462. # always in lower case.
  1463. #
  1464. # The script can change nzb-name, category, priority,
  1465. # post-processing parameters and top-/paused-flags of the nzb-file
  1466. # by printing special messages into standard output (which is processed
  1467. # by NZBGet).
  1468. #
  1469. # To change nzb-name use following syntax:
  1470. # echo "[NZB] NZBNAME=my download";
  1471. #
  1472. # To change category:
  1473. # echo "[NZB] CATEGORY=my category";
  1474. #
  1475. # To change priority:
  1476. # echo "[NZB] PRIORITY=signed_integer_value";
  1477. #
  1478. # for example: to set priority higher than normal:
  1479. # echo "[NZB] PRIORITY=50";
  1480. #
  1481. # another example: use a negative value for "lower than normal" priority:
  1482. # echo "[NZB] PRIORITY=-100";
  1483. #
  1484. # Although priority can be any integer value, the web-interface operates
  1485. # with six predefined priorities:
  1486. # -100 - very low priority;
  1487. # -50 - low priority;
  1488. # 0 - normal priority (default);
  1489. # 50 - high priority;
  1490. # 100 - very high priority;
  1491. # 900 - force priority.
  1492. #
  1493. # Downloads with priorities equal to or greater than 900 are downloaded and
  1494. # post-processed even if the program is in paused state (force mode).
  1495. #
  1496. # To assign post-processing parameters:
  1497. # echo "[NZB] NZBPR_myvar=my value";
  1498. #
  1499. # The prefix "NZBPR_" will be removed. In this example a post-processing
  1500. # parameter with name "myvar" and value "my value" will be associated
  1501. # with nzb-file.
  1502. #
  1503. # To change top-flag (nzb-file will be added to the top of queue):
  1504. # echo "[NZB] TOP=1";
  1505. #
  1506. # To change paused-flag (nzb-file will be added in paused state):
  1507. # echo "[NZB] PAUSED=1";
  1508. #
  1509. # To change duplicate key:
  1510. # echo "[NZB] DUPEKEY=tv show s01e02";
  1511. #
  1512. # To change duplicate score:
  1513. # echo "[NZB] DUPESCORE=integer_value";
  1514. #
  1515. # To change duplicate mode:
  1516. # echo "[NZB] DUPEMODE=(SCORE|ALL|FORCE)";
  1517. #
  1518. # The script can delete processed file, rename it or move somewhere.
  1519. # After the calling of the script the file will be either added to queue
  1520. # (if it was an nzb-file) or renamed by adding the extension ".processed".
  1521. #
  1522. # NOTE: Files with extensions ".processed", ".queued" and ".error" are skipped
  1523. # during the directory scanning.
  1524. #
  1525. # NOTE: Files with extension ".nzb_processed" are not passed to
  1526. # scan-script before adding to queue. This feature allows scan-script
  1527. # to prevent the scanning of nzb-files extracted from archives, if
  1528. # they were already processed by the script.
  1529. #
  1530. # NOTE: Files added via RPC calls in particular from web-interface are
  1531. # saved into incoming nzb-directory and then processed by the script.
  1532. #
  1533. # NOTE: This is a short documentation, for more information visit
  1534. # http://nzbget.net/Extension_scripts.
  1535. ScanScript=
  1536.  
  1537. # List of queue scripts to execute after a nzb-file is added to queue.
  1538. #
  1539. # The scripts in the list must be separated with commas or semicolons. Only
  1540. # filenames without path must be used. All scripts must be stored in directory
  1541. # pointed by option <ScriptDir>.
  1542. #
  1543. # The scripts are executed each time a new file is added to queue.
  1544. #
  1545. # Example: DeleteQueueSamples.sh, NzbAddedNotify.py.
  1546. #
  1547. # The script can modify the files in download queue (for example
  1548. # delete or pause all nfo, sfv, sample files) or do something else.
  1549. #
  1550. # INFO FOR DEVELOPERS:
  1551. # NOTE: This is a short documentation, for more information visit
  1552. # http://nzbget.net/Extension_scripts.
  1553. #
  1554. # NZBGet passes following arguments to the queue script as environment
  1555. # variables:
  1556. # NZBNA_NZBNAME - name of nzb-group. This name can be used in calls
  1557. # to nzbget edit-command using subswitch "-GN name";
  1558. # NZBNA_FILENAME - filename of the nzb-file. If the file was added
  1559. # from nzb-directory this is the fullname with path.
  1560. # If the file was added via web-interface it contains
  1561. # only filename without path;
  1562. # NZBNA_EVENT - describes why the script was called:
  1563. # NZB_ADDED - after adding of nzb-file to queue;
  1564. # FILE_DOWNLOADED - after a file included in nzb is
  1565. # downloaded;
  1566. # NZB_DOWNLOADED - after all files in nzb are downloaded
  1567. # (before post-processing).
  1568. # In the future the list of supported events may be
  1569. # extended. To avoid conflicts with future NZBGet
  1570. # versions the script must exit if the parameter
  1571. # has a value unknown to the script.
  1572. # NZBNA_CATEGORY - category of nzb-file (if assigned);
  1573. # NZBNA_NZBID - id of the nzb-file. This ID can be used with
  1574. # calls to nzbget edit-command;
  1575. # NZBNA_PRIORITY - priority (default is 0).
  1576. #
  1577. # In addition to these arguments NZBGet passes all nzbget.conf-options
  1578. # to the script as environment variables. These variables have prefix
  1579. # "NZBOP_" and are written in UPPER CASE. For Example option "ParRepair"
  1580. # is passed as environment variable "NZBOP_PARREPAIR". The dots in option
  1581. # names are replaced with underscores, for example "SERVER1_HOST". For
  1582. # options with predefined possible values (yes/no, etc.) the values are
  1583. # passed always in lower case.
  1584. #
  1585. # The script can printing special messages into standard output (which
  1586. # is processed by NZBGet).
  1587. #
  1588. # To assign post-processing parameters:
  1589. # echo "[NZB] NZBPR_myvar=my value";
  1590. #
  1591. # The prefix "NZBPR_" will be removed. In this example a post-processing
  1592. # parameter with name "myvar" and value "my value" will be associated
  1593. # with nzb-file.
  1594. #
  1595. # To inform NZBGet about bad download:
  1596. # echo "[NZB] MARK=BAD";
  1597. #
  1598. # Examples of what the script can do:
  1599. # 1) pausing nzb-file using file-id:
  1600. # "$NZBOP_APPBIN" -c "$NZBOP_CONFIGFILE" -E G P $NZBNA_NZBID;
  1601. # 2) setting category using nzb-name:
  1602. # "$NZBOP_APPBIN" -c "$NZBOP_CONFIGFILE" -E GN K "my cat" "$NZBNA_NZBNAME";
  1603. # 3) pausing files with extension "nzb":
  1604. # "$NZBOP_APPBIN" -c "$NZBOP_CONFIGFILE" -E FR P "$NZBNA_NZBNAME/.*\.nzb";
  1605. #
  1606. # NOTE: This is a short documentation, for more information visit
  1607. # http://nzbget.net/Extension_scripts.
  1608. QueueScript=
  1609.  
  1610. # Execution order for scripts.
  1611. #
  1612. # If you assign multiple scripts to one nzb-file, they are executed in the
  1613. # order defined by this option. Scripts not listed here are executed at
  1614. # the end in their alphabetical order.
  1615. #
  1616. # The scripts in the list must be separated with commas or semicolons. Only
  1617. # filenames without path must be used. All scripts must be stored in directory
  1618. # pointed by option <ScriptDir>.
  1619. #
  1620. # Example: Cleanup.sh, Move.sh.
  1621. ScriptOrder=
  1622.  
  1623. # Pause download queue during executing of postprocess-script (yes, no).
  1624. #
  1625. # Enable the option to give CPU more time for postprocess-script. That helps
  1626. # to speed up postprocess on slow CPUs with fast connection (e.g. NAS-devices).
  1627. #
  1628. # NOTE: See also options <ParPauseQueue> and <UnpackPauseQueue>.
  1629. ScriptPauseQueue=no
  1630.  
  1631. # Minimum interval between calls of queue-scripts (seconds).
  1632. #
  1633. # Queue-scripts are executed during download, after every file included in
  1634. # nzb-file is downloaded. If the files are small they may be downloaded
  1635. # very fast causing queue-scripts to be working all the time. Sometimes
  1636. # this may lead to a performance decrease on systems with slow CPUs.
  1637. #
  1638. # This option allows to reduce the number of calls of queue-scripts by
  1639. # skipping "file-downloaded"-events if the previous call of queue-scripts
  1640. # for the same download (nzb-file) were performed a short time ago
  1641. # (as defined by the option).
  1642. #
  1643. # Value "-1" disables executing of queue-scripts on
  1644. # "file-downloaded"-events. Scripts are still executed on events
  1645. # "nzb-added" and "nzb-downloaded".
  1646. #
  1647. # NOTE: This options affects only queue-scripts and only
  1648. # "file-downloaded"-events. Queue-scripts can be activated using
  1649. # option <QueueScript> (for pure queue-scripts) or option <PostScript>
  1650. # (for dual-mode scripts which act as queue- and post-processing-scripts
  1651. # at the same time).
  1652. EventInterval=0
  1653. Category2.DestDir=
  1654. Category2.Unpack=yes
  1655. Category2.PostScript=
  1656. Category2.Aliases=
  1657. Category3.DestDir=
  1658. Category3.Unpack=yes
  1659. Category3.PostScript=
  1660. Category3.Aliases=
  1661. Category4.DestDir=
  1662. Category4.Unpack=yes
  1663. Category4.PostScript=
  1664. Category4.Aliases=
  1665. EMail.py:From="NZBGet" <myaccount@gmail.com>
  1666. EMail.py:To=myaccount@gmail.com
  1667. EMail.py:Server=smtp.gmail.com
  1668. EMail.py:Port=25
  1669. EMail.py:Encryption=yes
  1670. EMail.py:Username=myaccount
  1671. EMail.py:Password=mypass
  1672. EMail.py:Statistics=yes
  1673. EMail.py:FileList=yes
  1674. EMail.py:BrokenLog=yes
  1675. EMail.py:PostProcessLog=OnFailure
  1676. nzbToMedia/DeleteSamples.py:mediaExtensions=.mkv,.avi,.divx,.xvid,.mov,.wmv,.mp4,.mpg,.mpeg,.vob,.iso
  1677. nzbToMedia/DeleteSamples.py:maxSampleSize=200
  1678. nzbToMedia/DeleteSamples.py:SampleIDs=sample,-s.
  1679. nzbToMedia/nzbToCouchPotato.py:auto_update=0
  1680. nzbToMedia/nzbToCouchPotato.py:check_media=1
  1681. nzbToMedia/nzbToCouchPotato.py:safe_mode=1
  1682. nzbToMedia/nzbToCouchPotato.py:cpsCategory=movie
  1683. nzbToMedia/nzbToCouchPotato.py:cpsapikey=
  1684. nzbToMedia/nzbToCouchPotato.py:cpshost=localhost
  1685. nzbToMedia/nzbToCouchPotato.py:cpsport=5050
  1686. nzbToMedia/nzbToCouchPotato.py:cpsssl=0
  1687. nzbToMedia/nzbToCouchPotato.py:cpsweb_root=
  1688. nzbToMedia/nzbToCouchPotato.py:cpswatch_dir=
  1689. nzbToMedia/nzbToCouchPotato.py:cpsmethod=renamer
  1690. nzbToMedia/nzbToCouchPotato.py:cpsdelete_failed=0
  1691. nzbToMedia/nzbToCouchPotato.py:cpswait_for=2
  1692. nzbToMedia/nzbToCouchPotato.py:cpsremote_path=0
  1693. nzbToMedia/nzbToCouchPotato.py:mountPoints=
  1694. nzbToMedia/nzbToCouchPotato.py:mediaExtensions=.mkv,.avi,.divx,.xvid,.mov,.wmv,.mp4,.mpg,.mpeg,.vob,.iso
  1695. nzbToMedia/nzbToCouchPotato.py:niceness=10
  1696. nzbToMedia/nzbToCouchPotato.py:ionice_class=2
  1697. nzbToMedia/nzbToCouchPotato.py:ionice_classdata=4
  1698. nzbToMedia/nzbToCouchPotato.py:getSubs=0
  1699. nzbToMedia/nzbToCouchPotato.py:subLanguages=eng,spa,fra
  1700. nzbToMedia/nzbToCouchPotato.py:transcode=0
  1701. nzbToMedia/nzbToCouchPotato.py:duplicate=1
  1702. nzbToMedia/nzbToCouchPotato.py:ignoreExtensions=.avi,.mkv
  1703. nzbToMedia/nzbToCouchPotato.py:outputFastStart=0
  1704. nzbToMedia/nzbToCouchPotato.py:outputVideoPath=
  1705. nzbToMedia/nzbToCouchPotato.py:processOutput=0
  1706. nzbToMedia/nzbToCouchPotato.py:audioLanguage=eng
  1707. nzbToMedia/nzbToCouchPotato.py:allAudioLanguages=0
  1708. nzbToMedia/nzbToCouchPotato.py:allSubLanguages=0
  1709. nzbToMedia/nzbToCouchPotato.py:embedSubs=1
  1710. nzbToMedia/nzbToCouchPotato.py:burnInSubtitle=0
  1711. nzbToMedia/nzbToCouchPotato.py:extractSubs=0
  1712. nzbToMedia/nzbToCouchPotato.py:externalSubDir=
  1713. nzbToMedia/nzbToCouchPotato.py:outputDefault=None
  1714. nzbToMedia/nzbToCouchPotato.py:hwAccel=0
  1715. nzbToMedia/nzbToCouchPotato.py:outputVideoExtension=.mp4
  1716. nzbToMedia/nzbToCouchPotato.py:outputVideoCodec=libx264
  1717. nzbToMedia/nzbToCouchPotato.py:VideoCodecAllow=
  1718. nzbToMedia/nzbToCouchPotato.py:outputVideoPreset=medium
  1719. nzbToMedia/nzbToCouchPotato.py:outputVideoFramerate=24
  1720. nzbToMedia/nzbToCouchPotato.py:outputVideoBitrate=800k
  1721. nzbToMedia/nzbToCouchPotato.py:outputAudioCodec=ac3
  1722. nzbToMedia/nzbToCouchPotato.py:AudioCodecAllow=
  1723. nzbToMedia/nzbToCouchPotato.py:outputAudioChannels=6
  1724. nzbToMedia/nzbToCouchPotato.py:outputAudioBitrate=640k
  1725. nzbToMedia/nzbToCouchPotato.py:outputQualityPercent=
  1726. nzbToMedia/nzbToCouchPotato.py:outputAudioTrack2Codec=libfaac
  1727. nzbToMedia/nzbToCouchPotato.py:AudioCodec2Allow=
  1728. nzbToMedia/nzbToCouchPotato.py:outputAudioTrack2Channels=2
  1729. nzbToMedia/nzbToCouchPotato.py:outputAudioTrack2Bitrate=160k
  1730. nzbToMedia/nzbToCouchPotato.py:outputAudioOtherCodec=libmp3lame
  1731. nzbToMedia/nzbToCouchPotato.py:AudioOtherCodecAllow=
  1732. nzbToMedia/nzbToCouchPotato.py:outputAudioOtherChannels=2
  1733. nzbToMedia/nzbToCouchPotato.py:outputAudioOtherBitrate=128k
  1734. nzbToMedia/nzbToCouchPotato.py:outputSubtitleCodec=
  1735. nzbToMedia/nzbToCouchPotato.py:wolwake=0
  1736. nzbToMedia/nzbToCouchPotato.py:wolmac=00:01:2e:2D:64:e1
  1737. nzbToMedia/nzbToCouchPotato.py:wolhost=192.168.1.37
  1738. nzbToMedia/nzbToCouchPotato.py:wolport=80
  1739. nzbToMedia/nzbToGamez.py:auto_update=0
  1740. nzbToMedia/nzbToGamez.py:safe_mode=1
  1741. nzbToMedia/nzbToGamez.py:gzCategory=games
  1742. nzbToMedia/nzbToGamez.py:gzapikey=
  1743. nzbToMedia/nzbToGamez.py:gzhost=localhost
  1744. nzbToMedia/nzbToGamez.py:gzport=8085
  1745. nzbToMedia/nzbToGamez.py:gzssl=0
  1746. nzbToMedia/nzbToGamez.py:gzweb_root=
  1747. nzbToMedia/nzbToGamez.py:gzwatch_dir=
  1748. nzbToMedia/nzbToGamez.py:niceness=10
  1749. nzbToMedia/nzbToGamez.py:ionice_class=2
  1750. nzbToMedia/nzbToGamez.py:ionice_classdata=4
  1751. nzbToMedia/nzbToGamez.py:wolwake=0
  1752. nzbToMedia/nzbToGamez.py:wolmac=00:01:2e:2D:64:e1
  1753. nzbToMedia/nzbToGamez.py:wolhost=192.168.1.37
  1754. nzbToMedia/nzbToGamez.py:wolport=80
  1755. nzbToMedia/nzbToHeadPhones.py:auto_update=0
  1756. nzbToMedia/nzbToHeadPhones.py:safe_mode=1
  1757. nzbToMedia/nzbToHeadPhones.py:hpCategory=music
  1758. nzbToMedia/nzbToHeadPhones.py:hpapikey=
  1759. nzbToMedia/nzbToHeadPhones.py:hphost=localhost
  1760. nzbToMedia/nzbToHeadPhones.py:hpport=8181
  1761. nzbToMedia/nzbToHeadPhones.py:hpssl=0
  1762. nzbToMedia/nzbToHeadPhones.py:hpweb_root=
  1763. nzbToMedia/nzbToHeadPhones.py:hpwatch_dir=
  1764. nzbToMedia/nzbToHeadPhones.py:hpwait_for=2
  1765. nzbToMedia/nzbToHeadPhones.py:hpremote_path=0
  1766. nzbToMedia/nzbToHeadPhones.py:niceness=10
  1767. nzbToMedia/nzbToHeadPhones.py:ionice_class=2
  1768. nzbToMedia/nzbToHeadPhones.py:ionice_classdata=4
  1769. nzbToMedia/nzbToHeadPhones.py:mountPoints=
  1770. nzbToMedia/nzbToHeadPhones.py:wolwake=0
  1771. nzbToMedia/nzbToHeadPhones.py:wolmac=00:01:2e:2D:64:e1
  1772. nzbToMedia/nzbToHeadPhones.py:wolhost=192.168.1.37
  1773. nzbToMedia/nzbToHeadPhones.py:wolport=80
  1774. nzbToMedia/nzbToMedia.py:auto_update=0
  1775. nzbToMedia/nzbToMedia.py:check_media=1
  1776. nzbToMedia/nzbToMedia.py:safe_mode=1
  1777. nzbToMedia/nzbToMedia.py:cpsCategory=movie
  1778. nzbToMedia/nzbToMedia.py:cpsapikey=
  1779. nzbToMedia/nzbToMedia.py:cpshost=localhost
  1780. nzbToMedia/nzbToMedia.py:cpsport=5050
  1781. nzbToMedia/nzbToMedia.py:cpsssl=0
  1782. nzbToMedia/nzbToMedia.py:cpsweb_root=
  1783. nzbToMedia/nzbToMedia.py:cpsmethod=renamer
  1784. nzbToMedia/nzbToMedia.py:cpsdelete_failed=0
  1785. nzbToMedia/nzbToMedia.py:cpswait_for=2
  1786. nzbToMedia/nzbToMedia.py:cpsremote_path=0
  1787. nzbToMedia/nzbToMedia.py:sbCategory=tv
  1788. nzbToMedia/nzbToMedia.py:sbhost=localhost
  1789. nzbToMedia/nzbToMedia.py:sbport=8081
  1790. nzbToMedia/nzbToMedia.py:sbusername=
  1791. nzbToMedia/nzbToMedia.py:sbpassword=
  1792. nzbToMedia/nzbToMedia.py:sbssl=0
  1793. nzbToMedia/nzbToMedia.py:sbweb_root=
  1794. nzbToMedia/nzbToMedia.py:sbwatch_dir=
  1795. nzbToMedia/nzbToMedia.py:sbfork=auto
  1796. nzbToMedia/nzbToMedia.py:sbdelete_failed=0
  1797. nzbToMedia/nzbToMedia.py:sbprocess_method=
  1798. nzbToMedia/nzbToMedia.py:sbremote_path=0
  1799. nzbToMedia/nzbToMedia.py:ndCategory=tv2
  1800. nzbToMedia/nzbToMedia.py:ndhost=localhost
  1801. nzbToMedia/nzbToMedia.py:ndport=8989
  1802. nzbToMedia/nzbToMedia.py:ndapikey=
  1803. nzbToMedia/nzbToMedia.py:ndssl=0
  1804. nzbToMedia/nzbToMedia.py:ndweb_root=
  1805. nzbToMedia/nzbToMedia.py:ndwait_for=2
  1806. nzbToMedia/nzbToMedia.py:nddelete_failed=0
  1807. nzbToMedia/nzbToMedia.py:ndremote_path=0
  1808. nzbToMedia/nzbToMedia.py:hpCategory=music
  1809. nzbToMedia/nzbToMedia.py:hpapikey=
  1810. nzbToMedia/nzbToMedia.py:hphost=localhost
  1811. nzbToMedia/nzbToMedia.py:hpport=8181
  1812. nzbToMedia/nzbToMedia.py:hpssl=0
  1813. nzbToMedia/nzbToMedia.py:hpweb_root=
  1814. nzbToMedia/nzbToMedia.py:hpremote_path=0
  1815. nzbToMedia/nzbToMedia.py:myCategory=comics
  1816. nzbToMedia/nzbToMedia.py:myhost=localhost
  1817. nzbToMedia/nzbToMedia.py:myport=8090
  1818. nzbToMedia/nzbToMedia.py:myusername=
  1819. nzbToMedia/nzbToMedia.py:mypassword=
  1820. nzbToMedia/nzbToMedia.py:myssl=0
  1821. nzbToMedia/nzbToMedia.py:myweb_root=
  1822. nzbToMedia/nzbToMedia.py:myswait_for=1
  1823. nzbToMedia/nzbToMedia.py:myremote_path=0
  1824. nzbToMedia/nzbToMedia.py:gzCategory=games
  1825. nzbToMedia/nzbToMedia.py:gzapikey=
  1826. nzbToMedia/nzbToMedia.py:gzhost=localhost
  1827. nzbToMedia/nzbToMedia.py:gzport=8085
  1828. nzbToMedia/nzbToMedia.py:gzssl=0
  1829. nzbToMedia/nzbToMedia.py:gzweb_root=
  1830. nzbToMedia/nzbToMedia.py:gzremote_path=0
  1831. nzbToMedia/nzbToMedia.py:mountPoints=
  1832. nzbToMedia/nzbToMedia.py:mediaExtensions=.mkv,.avi,.divx,.xvid,.mov,.wmv,.mp4,.mpg,.mpeg,.vob,.iso
  1833. nzbToMedia/nzbToMedia.py:niceness=10
  1834. nzbToMedia/nzbToMedia.py:ionice_class=2
  1835. nzbToMedia/nzbToMedia.py:ionice_classdata=4
  1836. nzbToMedia/nzbToMedia.py:getSubs=0
  1837. nzbToMedia/nzbToMedia.py:subLanguages=eng,spa,fra
  1838. nzbToMedia/nzbToMedia.py:transcode=0
  1839. nzbToMedia/nzbToMedia.py:duplicate=1
  1840. nzbToMedia/nzbToMedia.py:ignoreExtensions=.avi,.mkv
  1841. nzbToMedia/nzbToMedia.py:outputFastStart=0
  1842. nzbToMedia/nzbToMedia.py:outputVideoPath=
  1843. nzbToMedia/nzbToMedia.py:processOutput=0
  1844. nzbToMedia/nzbToMedia.py:audioLanguage=eng
  1845. nzbToMedia/nzbToMedia.py:allAudioLanguages=0
  1846. nzbToMedia/nzbToMedia.py:allSubLanguages=0
  1847. nzbToMedia/nzbToMedia.py:embedSubs=1
  1848. nzbToMedia/nzbToMedia.py:burnInSubtitle=0
  1849. nzbToMedia/nzbToMedia.py:extractSubs=0
  1850. nzbToMedia/nzbToMedia.py:externalSubDir=
  1851. nzbToMedia/nzbToMedia.py:outputDefault=None
  1852. nzbToMedia/nzbToMedia.py:hwAccel=0
  1853. nzbToMedia/nzbToMedia.py:outputVideoExtension=.mp4
  1854. nzbToMedia/nzbToMedia.py:outputVideoCodec=libx264
  1855. nzbToMedia/nzbToMedia.py:VideoCodecAllow=
  1856. nzbToMedia/nzbToMedia.py:outputVideoPreset=medium
  1857. nzbToMedia/nzbToMedia.py:outputVideoFramerate=24
  1858. nzbToMedia/nzbToMedia.py:outputVideoBitrate=800k
  1859. nzbToMedia/nzbToMedia.py:outputAudioCodec=ac3
  1860. nzbToMedia/nzbToMedia.py:AudioCodecAllow=
  1861. nzbToMedia/nzbToMedia.py:outputAudioChannels=6
  1862. nzbToMedia/nzbToMedia.py:outputAudioBitrate=640k
  1863. nzbToMedia/nzbToMedia.py:outputQualityPercent=
  1864. nzbToMedia/nzbToMedia.py:outputAudioTrack2Codec=libfaac
  1865. nzbToMedia/nzbToMedia.py:AudioCodec2Allow=
  1866. nzbToMedia/nzbToMedia.py:outputAudioTrack2Channels=2
  1867. nzbToMedia/nzbToMedia.py:outputAudioTrack2Bitrate=160k
  1868. nzbToMedia/nzbToMedia.py:outputAudioOtherCodec=libmp3lame
  1869. nzbToMedia/nzbToMedia.py:AudioOtherCodecAllow=
  1870. nzbToMedia/nzbToMedia.py:outputAudioOtherChannels=2
  1871. nzbToMedia/nzbToMedia.py:outputAudioOtherBitrate=128k
  1872. nzbToMedia/nzbToMedia.py:outputSubtitleCodec=
  1873. nzbToMedia/nzbToMedia.py:wolwake=0
  1874. nzbToMedia/nzbToMedia.py:wolmac=00:01:2e:2D:64:e1
  1875. nzbToMedia/nzbToMedia.py:wolhost=192.168.1.37
  1876. nzbToMedia/nzbToMedia.py:wolport=80
  1877. nzbToMedia/nzbToMedia.py:usCategory=mine
  1878. nzbToMedia/nzbToMedia.py:usremote_path=0
  1879. nzbToMedia/nzbToMedia.py:user_script_mediaExtensions=.mkv,.avi,.divx,.xvid,.mov,.wmv,.mp4,.mpg,.mpeg
  1880. nzbToMedia/nzbToMedia.py:user_script_path=/nzbToMedia/userscripts/script.sh
  1881. nzbToMedia/nzbToMedia.py:user_script_param=FN
  1882. nzbToMedia/nzbToMedia.py:user_script_runOnce=0
  1883. nzbToMedia/nzbToMedia.py:user_script_successCodes=0
  1884. nzbToMedia/nzbToMedia.py:user_script_clean=1
  1885. nzbToMedia/nzbToMedia.py:usdelay=120
  1886. nzbToMedia/nzbToMylar.py:auto_update=0
  1887. nzbToMedia/nzbToMylar.py:safe_mode=1
  1888. nzbToMedia/nzbToMylar.py:myCategory=comics
  1889. nzbToMedia/nzbToMylar.py:myhost=localhost
  1890. nzbToMedia/nzbToMylar.py:myport=8090
  1891. nzbToMedia/nzbToMylar.py:myusername=
  1892. nzbToMedia/nzbToMylar.py:mypassword=
  1893. nzbToMedia/nzbToMylar.py:myssl=0
  1894. nzbToMedia/nzbToMylar.py:myweb_root=
  1895. nzbToMedia/nzbToMylar.py:myswait_for=1
  1896. nzbToMedia/nzbToMylar.py:mywatch_dir=
  1897. nzbToMedia/nzbToMylar.py:myremote_path=0
  1898. nzbToMedia/nzbToMylar.py:niceness=10
  1899. nzbToMedia/nzbToMylar.py:ionice_class=2
  1900. nzbToMedia/nzbToMylar.py:ionice_classdata=4
  1901. nzbToMedia/nzbToMylar.py:mountPoints=
  1902. nzbToMedia/nzbToMylar.py:wolwake=0
  1903. nzbToMedia/nzbToMylar.py:wolmac=00:01:2e:2D:64:e1
  1904. nzbToMedia/nzbToMylar.py:wolhost=192.168.1.37
  1905. nzbToMedia/nzbToMylar.py:wolport=80
  1906. nzbToMedia/nzbToNzbDrone.py:auto_update=0
  1907. nzbToMedia/nzbToNzbDrone.py:check_media=1
  1908. nzbToMedia/nzbToNzbDrone.py:safe_mode=1
  1909. nzbToMedia/nzbToNzbDrone.py:ndCategory=tv2
  1910. nzbToMedia/nzbToNzbDrone.py:ndhost=localhost
  1911. nzbToMedia/nzbToNzbDrone.py:ndport=8989
  1912. nzbToMedia/nzbToNzbDrone.py:ndapikey=
  1913. nzbToMedia/nzbToNzbDrone.py:ndssl=0
  1914. nzbToMedia/nzbToNzbDrone.py:ndweb_root=
  1915. nzbToMedia/nzbToNzbDrone.py:ndwait_for=2
  1916. nzbToMedia/nzbToNzbDrone.py:nddelete_failed=0
  1917. nzbToMedia/nzbToNzbDrone.py:ndremote_path=0
  1918. nzbToMedia/nzbToNzbDrone.py:mountPoints=
  1919. nzbToMedia/nzbToNzbDrone.py:mediaExtensions=.mkv,.avi,.divx,.xvid,.mov,.wmv,.mp4,.mpg,.mpeg,.vob,.iso
  1920. nzbToMedia/nzbToNzbDrone.py:niceness=10
  1921. nzbToMedia/nzbToNzbDrone.py:ionice_class=2
  1922. nzbToMedia/nzbToNzbDrone.py:ionice_classdata=4
  1923. nzbToMedia/nzbToNzbDrone.py:getSubs=0
  1924. nzbToMedia/nzbToNzbDrone.py:subLanguages=eng,spa,fra
  1925. nzbToMedia/nzbToNzbDrone.py:transcode=0
  1926. nzbToMedia/nzbToNzbDrone.py:duplicate=1
  1927. nzbToMedia/nzbToNzbDrone.py:ignoreExtensions=.avi,.mkv
  1928. nzbToMedia/nzbToNzbDrone.py:outputFastStart=0
  1929. nzbToMedia/nzbToNzbDrone.py:outputVideoPath=
  1930. nzbToMedia/nzbToNzbDrone.py:processOutput=0
  1931. nzbToMedia/nzbToNzbDrone.py:audioLanguage=eng
  1932. nzbToMedia/nzbToNzbDrone.py:allAudioLanguages=0
  1933. nzbToMedia/nzbToNzbDrone.py:allSubLanguages=0
  1934. nzbToMedia/nzbToNzbDrone.py:embedSubs=1
  1935. nzbToMedia/nzbToNzbDrone.py:burnInSubtitle=0
  1936. nzbToMedia/nzbToNzbDrone.py:extractSubs=0
  1937. nzbToMedia/nzbToNzbDrone.py:externalSubDir=
  1938. nzbToMedia/nzbToNzbDrone.py:outputDefault=None
  1939. nzbToMedia/nzbToNzbDrone.py:hwAccel=0
  1940. nzbToMedia/nzbToNzbDrone.py:outputVideoExtension=.mp4
  1941. nzbToMedia/nzbToNzbDrone.py:outputVideoCodec=libx264
  1942. nzbToMedia/nzbToNzbDrone.py:VideoCodecAllow=
  1943. nzbToMedia/nzbToNzbDrone.py:outputVideoPreset=medium
  1944. nzbToMedia/nzbToNzbDrone.py:outputVideoFramerate=24
  1945. nzbToMedia/nzbToNzbDrone.py:outputVideoBitrate=800k
  1946. nzbToMedia/nzbToNzbDrone.py:outputAudioCodec=libmp3lame
  1947. nzbToMedia/nzbToNzbDrone.py:AudioCodecAllow=
  1948. nzbToMedia/nzbToNzbDrone.py:outputAudioBitrate=128k
  1949. nzbToMedia/nzbToNzbDrone.py:outputQualityPercent=0
  1950. nzbToMedia/nzbToNzbDrone.py:outputAudioTrack2Codec=libfaac
  1951. nzbToMedia/nzbToNzbDrone.py:AudioCodec2Allow=
  1952. nzbToMedia/nzbToNzbDrone.py:outputAudioTrack2Bitrate=128k
  1953. nzbToMedia/nzbToNzbDrone.py:outputAudioOtherCodec=libmp3lame
  1954. nzbToMedia/nzbToNzbDrone.py:AudioOtherCodecAllow=
  1955. nzbToMedia/nzbToNzbDrone.py:outputAudioOtherBitrate=128k
  1956. nzbToMedia/nzbToNzbDrone.py:outputSubtitleCodec=
  1957. nzbToMedia/nzbToNzbDrone.py:wolwake=0
  1958. nzbToMedia/nzbToNzbDrone.py:wolmac=00:01:2e:2D:64:e1
  1959. nzbToMedia/nzbToNzbDrone.py:wolhost=192.168.1.37
  1960. nzbToMedia/nzbToNzbDrone.py:wolport=80
  1961. nzbToMedia/nzbToSickBeard.py:auto_update=0
  1962. nzbToMedia/nzbToSickBeard.py:check_media=1
  1963. nzbToMedia/nzbToSickBeard.py:safe_mode=1
  1964. nzbToMedia/nzbToSickBeard.py:mediaExtensions=.mkv,.avi,.divx,.xvid,.mov,.wmv,.mp4,.mpg,.mpeg,.vob,.iso
  1965. nzbToMedia/nzbToSickBeard.py:sbCategory=tv
  1966. nzbToMedia/nzbToSickBeard.py:sbhost=localhost
  1967. nzbToMedia/nzbToSickBeard.py:sbport=8081
  1968. nzbToMedia/nzbToSickBeard.py:sbusername=
  1969. nzbToMedia/nzbToSickBeard.py:sbpassword=
  1970. nzbToMedia/nzbToSickBeard.py:sbssl=0
  1971. nzbToMedia/nzbToSickBeard.py:sbweb_root=
  1972. nzbToMedia/nzbToSickBeard.py:sbwatch_dir=
  1973. nzbToMedia/nzbToSickBeard.py:sbfork=auto
  1974. nzbToMedia/nzbToSickBeard.py:sbdelete_failed=0
  1975. nzbToMedia/nzbToSickBeard.py:sbprocess_method=
  1976. nzbToMedia/nzbToSickBeard.py:sbremote_path=0
  1977. nzbToMedia/nzbToSickBeard.py:mountPoints=
  1978. nzbToMedia/nzbToSickBeard.py:mediaExtensions=.mkv,.avi,.divx,.xvid,.mov,.wmv,.mp4,.mpg,.mpeg,.vob,.iso
  1979. nzbToMedia/nzbToSickBeard.py:niceness=10
  1980. nzbToMedia/nzbToSickBeard.py:ionice_class=2
  1981. nzbToMedia/nzbToSickBeard.py:ionice_classdata=4
  1982. nzbToMedia/nzbToSickBeard.py:getSubs=0
  1983. nzbToMedia/nzbToSickBeard.py:subLanguages=eng,spa,fra
  1984. nzbToMedia/nzbToSickBeard.py:transcode=0
  1985. nzbToMedia/nzbToSickBeard.py:duplicate=1
  1986. nzbToMedia/nzbToSickBeard.py:ignoreExtensions=.avi,.mkv
  1987. nzbToMedia/nzbToSickBeard.py:outputFastStart=0
  1988. nzbToMedia/nzbToSickBeard.py:outputVideoPath=
  1989. nzbToMedia/nzbToSickBeard.py:processOutput=0
  1990. nzbToMedia/nzbToSickBeard.py:audioLanguage=eng
  1991. nzbToMedia/nzbToSickBeard.py:allAudioLanguages=0
  1992. nzbToMedia/nzbToSickBeard.py:allSubLanguages=0
  1993. nzbToMedia/nzbToSickBeard.py:embedSubs=1
  1994. nzbToMedia/nzbToSickBeard.py:burnInSubtitle=0
  1995. nzbToMedia/nzbToSickBeard.py:extractSubs=0
  1996. nzbToMedia/nzbToSickBeard.py:externalSubDir=
  1997. nzbToMedia/nzbToSickBeard.py:outputDefault=None
  1998. nzbToMedia/nzbToSickBeard.py:hwAccel=0
  1999. nzbToMedia/nzbToSickBeard.py:outputVideoExtension=.mp4
  2000. nzbToMedia/nzbToSickBeard.py:outputVideoCodec=libx264
  2001. nzbToMedia/nzbToSickBeard.py:VideoCodecAllow=
  2002. nzbToMedia/nzbToSickBeard.py:outputVideoPreset=medium
  2003. nzbToMedia/nzbToSickBeard.py:outputVideoFramerate=24
  2004. nzbToMedia/nzbToSickBeard.py:outputVideoBitrate=800k
  2005. nzbToMedia/nzbToSickBeard.py:outputAudioCodec=ac3
  2006. nzbToMedia/nzbToSickBeard.py:AudioCodecAllow=
  2007. nzbToMedia/nzbToSickBeard.py:outputAudioChannels=6
  2008. nzbToMedia/nzbToSickBeard.py:outputAudioBitrate=640k
  2009. nzbToMedia/nzbToSickBeard.py:outputQualityPercent=
  2010. nzbToMedia/nzbToSickBeard.py:outputAudioTrack2Codec=libfaac
  2011. nzbToMedia/nzbToSickBeard.py:AudioCodec2Allow=
  2012. nzbToMedia/nzbToSickBeard.py:outputAudioTrack2Channels=2
  2013. nzbToMedia/nzbToSickBeard.py:outputAudioTrack2Bitrate=160k
  2014. nzbToMedia/nzbToSickBeard.py:outputAudioOtherCodec=libmp3lame
  2015. nzbToMedia/nzbToSickBeard.py:AudioOtherCodecAllow=
  2016. nzbToMedia/nzbToSickBeard.py:outputAudioOtherChannels=2
  2017. nzbToMedia/nzbToSickBeard.py:outputAudioOtherBitrate=128k
  2018. nzbToMedia/nzbToSickBeard.py:outputSubtitleCodec=
  2019. nzbToMedia/nzbToSickBeard.py:wolwake=0
  2020. nzbToMedia/nzbToSickBeard.py:wolmac=00:01:2e:2D:64:e1
  2021. nzbToMedia/nzbToSickBeard.py:wolhost=192.168.1.37
  2022. nzbToMedia/nzbToSickBeard.py:wolport=80
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!